Hoping for help with at least the top one but potentially both. I have a hard time understanding if the subscripts go to the other elements or not.

Answer:

CuCl2 + Aluminum = Chemical / Physical change

Answer:

Chemical bonding is the process by which atoms are held together to form molecules. The bond between atoms is created by the sharing of electrons. The electrons are attracted to the nucleus of the atoms, which creates a force that holds the atoms together.

Answer:

Both can be measured with a low level of certainty at the same time.  

it depends on what you count as low or high levels of uncertainty though.

Explanation:

The equation is something like:
[tex]\Delta x \Delta p \geq \frac{h}{4 \pi}[/tex]

delta x is the uncertainty (not change) of position, and delta p is the uncertainty of momentum. then term on the right is a constant (in this case, a very small number)

This equation tells us that neither the uncertainty of position nor the uncertainty of momentum can be zero, which means that there will always be some uncertainty. However, we can note that both of the uncertainties can be quite small at the same time, they just can't be smaller than h/4pi. This means that both can be measured with a fairly high level of certainty at the same time. However, there is a limit of how high the values can be, so i would expect that the answer your teacher is looking for is that both can be measured with a low level of certainty at the same time. This is always true, as opposed to saying that both can be measured when a high level of certainty at the same time, since high is quite subjective

Answer:

2

Explanation:

The new volume of the balloon will be 484.43 L.

This is an example of Charles' law, sometimes called the temperature-volume law. It states that the volume of a gas is directly proportional to the Kelvin temperature, while pressure and amount are held constant.

The equation is V1/T1=V2/T2, where V is volume and T is temperature in Kelvins.

Known

V1=556 L

T1=30∘C+273.15=303 K

T2=-9∘C+273.15=264 K

Unknown

V2

Solution

Rearrange the equation to isolate V2. Substitute the known values into the equation and solve.

V2=V1T2/T1

V2=(556L×264K)/303K=484.43 L.

To know more about Charles law

https://brainly.com/question/16927784

#SPJ1

Answer: a

Explanation:

The correct reactant that matches the equation is c)C₇H₆.

The missing reactant for the combustion reaction is C₇H₆. The complete reaction would be

2C₇H₆ + 1502 →14CO2+ 6H₂O.

C7H6 is a hydrocarbon molecule. The name of this molecule is heptendiin

If heptendiin is heated in the presence of oxygen, it will undergo combustion to form carbon dioxide and water vapor. When heptendiin is burned in air, the products of combustion are carbon dioxide and water vapor.

The combustion of this compound is a exothermic reaction, meaning that it releases heat on burning to give out Carbon-di-oxide and Water.

When 2 moles of C₇H₆ reacts with 15 moles of Oxygen, it gives 14 moles of Carbon-di-oxide and 6moles of water molecule.

Therefore the missing reactant, that gives out water and carbon-di-oxide is C₇H₆. Hence, the correct option is c)

To know more about, hydrocarbons, click below:

https://brainly.com/question/3551546

#SPJ1

Answer:

2.2

Explanation:

There are two types of chemical compound one is covalent compound and another is ionic compound in chemistry. In ionic bonds, electrons are completely transferred. The correct option is option C.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

Covalent compounds are formed by covalent bond and ionic compounds are formed by ionic bond. Covalent bond is formed by sharing of electron and ionic bond are formed by complete transfer of electron. Ionic bonds are stronger than covalent bonds. CCl[tex]_4[/tex], H[tex]_2[/tex]O, CO[tex]_2[/tex] are ionic compound. Al[tex]_2[/tex]O[tex]_3[/tex] is an ionic compound.

Therefore, the correct option is option C.

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ1

According to the law of conservation of mass, the total mass of the reacting substances is

A. always more than the total mass of the products.

B. always less than the total mass of the products.

C. sometimes more and sometimes less than the total mass of the products.

D. always equal to the total mass of the products.​

This is the one that I would have to choose.

Hope this helps:)

The initial temperature of the helium gas at a constant pressure is 113.63K.

The temperature of an ideal gas can be calculated using the Charles law equation as follows;

V₁/T₁ = V₂T₂

Where;

According to this question, three moles of helium gas have a volume of 15.0 L. When heated to 30.0 °C at constant pressure, it has a volume of 40.0 L. The initial temperature cane be calculated as follows:

15/T = 40/303

40T = 4545

T = 113.63K

Therefore, 113.63K is the initial temperature of the helium gas.

Learn more about temperature at: https://brainly.com/question/22854014

#SPJ1

Answer: The mass of KOH needed is 28 grams

Explanation:

Molarity: It is defined as the number of moles of solute present in one liter of solution.

In this question, the solute is KOH.

The formula used: M = N/V

wb = mass of solute KOH = ?

mb = molar mass of solute KOH = 56 g/mole

V = volume of solution = 250 ml

Molarity = 2.00 M = 2.00 mole/L

Now put all the given values in the above formula, and we get the mass of KOH.

Now put all the given values in the above formula, and we get the mass of KOH.

Therefore, the mass of KOH needed is 28 grams.

Answer: 28 grams

Explanation:  

2molarity/L= Mass of KOH/ 56g/molarity multiplied by 250ml multiplied by 1000 *Hope it helped*

n=3 <— n=5, n= 2 <— n=4 are most energy emitted and n=1 —> n=3, n=2 —> n=4 are most energy absorbed

In chemistry, energy is the capacity to carry out work. It may take on a variety of shapes, including potential, kinetic, thermal, electrical, chemical, radioactive, etc. Heat and labor are other examples of energy being transferred from one body to another. Once it has been transported, energy is always allotted according to its kind. Thus, heat transmission might manifest as thermal energy, but work could produce mechanical energy.

All energy kinds have the characteristic of motion. For instance, a body has kinetic energy if it is moving. A tensioned item, such as a spring or bow, has the capacity to move even while at rest; this property results from the design of the object, which incorporates potential energy.

To know more about  energy visit :https://brainly.com/question/13726591

#SPJ1

The volume of water that should be added in the given solution is equal to 202 ml.

The concentration or the volume of the dilute or concentrated solution can be calculated from the following equation:

M₁V₁ = M₂V₂

where M₁, V₁, M₂, and V₂ are the concentration and volume of the concentrated solution and dilute solution respectively.

Given, the concentration of the solution, M₁ = 0.14 M

The concentration of the diluted solution, M₂ = 0.100 M

The volume of concentrated solution, V₁ = 505 ml

Put the value of the molarity and volume in equation (1):

(0.140)× (505) = (0.100) × (V₂)

V₂ = 707 ml

The amount of water should be added = 707 - 505 = 202 ml

Learn more about dilution law, here:

brainly.com/question/15718488

#SPJ1

The amount, in grams, of calcium that are in 3.01 x [tex]10^{22[/tex] atoms of calcium would be 1.9992 grams.

According to the rules, 1 mole of any substance contains Avogadro's number, which is 6.022 x [tex]10^{23[/tex] atoms or molecules.

Now, we have a substance with  3.01 x [tex]10^{22[/tex] atoms of calcium.

If, 1 mole = 6.022 x [tex]10^{23[/tex] atoms

Then, 3.01 x [tex]10^{22[/tex] atoms = 3.01 x [tex]10^{22[/tex]/ 6.022 x [tex]10^{23[/tex]

                                       = 3.01/60.22

                                       = 0.04998 moles

Recall that:

Mole = mass/molar mass

The molar mass of the calcium atom is 40 g/mol.

Thus, the mass of 0.04998 mole of calcium = mole x molar mass

                                                                          = 0.04998 x 40

                                                                           = 1.9992 grams

In other words,  3.01 x [tex]10^{22[/tex] atoms of calcium would weigh 1.9992 grams of ca.

More on Avogadro's number can be found here: https://brainly.com/question/11907018

#SPJ1

Answer:

Below

Explanation:

125 ml = .125 L

.125 L  *   1.241  g/ L   = . 155 g

Answer: copper is a fcc.

Explanation:

Solid copper can be described as the arrangement of copper atoms in a face-centered-cubic (fcc) configuration.

Solid copper can be described as the arrangement of copper atoms in a face-centered-cubic (fcc) configuration.

Two of the most recognizable crystal shapes are face-centered cubics (FCC) and body-centered cubics (BCC). There are FCC, BCC, or HCP structures for almost all elements.

The atomic configurations are where FCC and BCC crystals diverge most drastically. All 8 corner positions and the centers of each of the six faces are occupied by atoms in the face-centered cubic structure. All eight corner positions and the cube's center are occupied by atoms in the body-centered cubic structure.

Compared to BCC metals, FCC metals are often more ductile, more stable at high temperatures, and more dense. This is a result of their packaging design and slip systems.

The most effective atomic configuration is found in FCC (tied with HCP).

Because of this, we refer to FCC as a "close-packed" structure. FCC metals will typically be more dense and stable because FCC atoms are grouped more tightly together than BCC atoms.

To know more about fcc or bcc, click on the link below:

https://brainly.com/question/12977980

#SPJ4

Answer: What are the answer choices?

Explanation: I need answer choices to see, there are a lot of definitions, verbs and nouns  for an answer.

Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclei. Different isotopes of an element normally behave similarly in chemical reactions.

I hope this helps!

Answer:

below

Explanation:

From periodic table:

Arsenic is a metalloid in the family with Silicon (Si) which has a mass of 14

The concentration of sodium ions in 0.130 M Na₂HPO₄  is 0.26 M.

The Na₂HPO₄ will dissociates in to ions we get :

Na₂HPO₄  ---->  2Na⁺   +  HPO₄⁻

here from the above equation it is clear that,the  1 moles of Na₂HPO₄ produce the 2 moles of Na⁺  and 1 mole of Na₂HPO₄  will produce 1 mole of  HPO₄⁻.

the concentration of Na⁺ = ?

concentration of the Na⁺ = 2 × Na₂HPO₄

concentration of the Na⁺ = 2 × 0.130 M

the concentration of the Na⁺ = 0.26 M    

Thus,  The concentration of sodium ions in 0.130 M Na₂HPO₄  is 0.26 M.

To learn more moles here

https://brainly.com/question/21323029

#SPJ9

Answer: Glass or plastic

Explanation:

Because they both are able to shatter hehehhe ;)))))))

Carbon dioxide is generated when any substance that contains carbon is burned. It is also a product of respiration and fermentation. Plants absorb carbon dioxide during photosynthesis.

If actual yield and theoretical yield are same then the percent yield will be 100%. Generally, the actual yield is lower than the theoretical yield. The percent yield of  0₂ is 93%.

Percent yield is the percent ratio of actual yield to the theoretical yield.

Mathematically,

Percent yield= actual yield of a product÷ theoretical yield of the product

The balanced reaction is

2Al₂O₃ →4A1+30₂

moles of Al₂O₃=given mass÷ molar mass

                        =96.3 g ÷100g/mol

                        =0.96moles

From 2 mole of Al₂O₃, 3 moles of 0₂ is produced

From 0.96moles of  Al₂O₃=(3÷2)×0.96moles of 0₂

                                          =1.44moles of 0₂

mass of  0₂=moles of  0₂×Molar mass of moles of 0₂

mass of  0₂=1.44×32

                  =46.08g

Percent yield=  43.2 g÷46.08g=93%

Therefore the percent yield of  0₂  is 93%.

To know more about percent yield, here:

https://brainly.com/question/11963853

#SPJ1

Four possible sub levels an electron can occupy are s, p, d, f

A level that is lower than or subordinate to another level called as sublevel and electron fill principal energy level or shell to have lowest possible energy and within the shell they also fill the sublevel are s,p,d,f to have the lowest energy and so electron in orbital in the s sublevel called s orbital and have less energy than those in p sublevel and the s sublevel has just one orbital and so can contain 2 electron maximum and the p sublevel has 3 orbital and so can it contain 6 electron maximum and in d 5 orbital and it contain 10 electron and f has 7 orbital and it contain 14 electron maximum

Know more about electron

https://brainly.com/question/12924271

#SPJ1

The molar mass of the protein under the conditions that we have in this question can be obtained to be 12065 g/mol.

We know that the osmotic pressure is one the colligative properties of the solution. The colligative properties are the properties that depend on the amount of substance that is present in the solution.

Mass of the protein = 0.135 g

Volume of the solution = 2.00 mL

Temperature of the system = 28 ∘C + 273 = 301 K

Osmotic pressure of the solution = 0.138 atm

We can get the osmotic pressure from;

π = iCRT

π = Omotic pressure

i = Van't Hoff factor

C = concentration of the solution

R = gas constant

T = temperature

Let the molar mass of the protein be M

0.138 = 1 * 0.135/M/0.002 * 0.082 * 301

0.138 =  1 * 0.135/0.002M * 0.082 * 301

0.138 = 3.33/0.002M

0.138 * 0.002M  = 3.33

M = 3.33/0.138 * 0.002

M = 12065 g/mol

Learn more about molar mass:https://brainly.com/question/12127540

#SPJ1

As per the balanced reaction, 2 moles of potassium gives 2 moles of hydrogen molecules. Thus 11.5 g or 0.302 mol will produce 0.302 moles of hydrogen. The mass of 0.302 mol of hydrogen is 0.604 g.

Hydrolysis is the reaction of a substance with water to form hydroxides or hydrides. The given reaction is hydrolysis of potassium giving 2 moles of H2.

The atomic mass of potassium is 38 g/mol. Thus the mass of 2 mole of potassium is 38 × 2 = 76 g. The number of moles in 11.5  g K is 0.302 moles. 2 moles of potassium gives 2 moles of H2, thus 0.302 moles gives 0.302 moles of H2.

The molecular mass of H2 is 2 g/mol. Thus mass of 0.302 moles is 0.302 × 2 = 0.604 g.

Hence, the mass in grams of hydrogen produced is 0.604 g.

To find more on potassium, refer here:

https://brainly.com/question/13321031

#SPJ1