Homework, 17.3-using proportional relationships

Solve for X

The general solution of non-homogeneous system can be written as:

x = xh + xp = [2t + 1, t, -2s - 2] + [-1, -28, 1]

We can now write the augmented matrix of the system as:

[2    -4    5     8]

[-7   14   4   -28]

[3   -6    1      12]

We can use row reduction to determine whether the system is consistent and to find its solutions.

Performing the row reduction, we get:

[1  -2  0  2]

[0   0  1 -2]

[0   0  0 0]

From the last row of the row-reduced matrix, we can see that the system has a dependent variable, which means that there are infinitely many solutions. We can write the general solution as:

x = x1 = 2t + 1

y = y1 = t

z = z1 = -2s - 2

Here, t and s are arbitrary parameters.

To find a particular solution, we can use any method we like. One method is to use the method of undetermined coefficients. We can guess that xp is a linear combination of the columns of A, with unknown coefficients:

xp = k1[2 -7 3] + k2[-4 14 -6] + k3[5 4 1]

where k1, k2, and k3 are unknown coefficients.

We can substitute this into the system and solve for the coefficients. This gives:

k1 = -1

k2 = -2

k3 = 1

Therefore, a particular solution is:

xp = [-1 -28 1]

So the general solution can be written as:

x = xh + xp = [2t + 1, t, -2s - 2] + [-1, -28, 1]

where t and s are arbitrary parameters.

To know more about non-homogeneous system refer here:

https://brainly.com/question/13720217

#SPJ11

Answer:

Set your calculator to degree mode.

Draw a line from point O to a vertex of this octagon to form a right triangle.

tan(67.5°) = 17/x, so x = 17/tan(67.5°)

Area = (1/2)(34/tan(67.5°))(8)(17) = 957.7

[tex]\underset{ \textit{angle in degrees} }{\textit{area of a regular polygon}}\\\\ A=na^2\cdot \tan\left( \frac{180}{n} \right) ~~ \begin{cases} n=sides\\ a=apothem\\[-0.5em] \hrulefill\\ n=8\\ a=17 \end{cases}\implies A=(8)(17)^2\tan\left( \frac{180}{8} \right) \\\\\\ A=2312\tan(22.5^o)\implies A\approx 957.7[/tex]

Make sure your calculator is in Degree mode.

The exponential Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$x(t)$[/tex] are:

[tex]$D_n n=\{(p i-A) / 2 p i$[/tex] for [tex]$n=0$[/tex]

[tex]\left\{(-1)^{\wedge} n /(n \mathrm{~A})\right.[/tex] for [tex]$n=+/-1,+/-2, \ldots$[/tex]

To sketch [tex]$x(t)$[/tex] over two periods from [tex]$t=0$[/tex] to [tex]$4 \mathrm{pi}$[/tex], we first need to plot one period of [tex]$x(t)$[/tex], which is given as:

[tex]$$\begin{aligned}& \mathrm{x}(\mathrm{t})=(1 / \mathrm{A}) \mathrm{t} 0 < =\mathrm{t} < \mathrm{A} \\& =\mathrm{A} \mathrm{A} < =\mathrm{t} < \mathrm{pi} \\& =0 \mathrm{pi} < =\mathrm{t} < 2 \mathrm{pi}\end{aligned}$$[/tex]

The plot of one period of [tex]x(t)[/tex] is shown below:

  |          /\

  |         /  \

A |        /    \

  |       /      \

  |      /        \

  |_____/          \_____

     0     A      pi    2pi

To sketch [tex]x(t)[/tex] over two periods, we need to repeat this pattern twice. Since [tex]x(t)[/tex] is a 2pi-periodic signal, we only need to sketch one period to represent the entire signal over any number of periods. Therefore, we can simply repeat the above plot twice to obtain the sketch of [tex]x(t)[/tex] over two periods from [tex]t = 0[/tex] to [tex]4pi[/tex], as shown below:

  |          /\          /\

  |         /  \        /  \

A |        /    \      /    \

  |       /      \    /      \

  |_____/        \__/        \_____

     0     A      pi         2pi  3pi

To find the exponential Fourier series coefficients [tex]D_n[/tex], we can use the formula:

[tex]$D_{\ldots} n=(1 / T) * \int[T] x(t) e^{\wedge}(-j n w 0 t) d t$[/tex]

where T is the period of [tex]$x(t)$[/tex], w0 is the fundamental angular frequency, and n is an integer. Since [tex]$x(t)$[/tex] is a 2pi-periodic signal, we have [tex]$T=2 p i$[/tex] and [tex]$\mathrm{wO}=2 \mathrm{pi} / \mathrm{T}=1$[/tex].

The Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$n=0,+/-1,+/-2, \ldots$[/tex] are given by:

[tex]$D_{\ldots} n=(1 / 2 p i) * \int[2 \mathrm{pi}] x(\mathrm{t}) \mathrm{e}^{\wedge}(-j n t) d t$[/tex]

For [tex]$\mathrm{n}=0$[/tex], we have:

[tex]{ D_0 }$[/tex][tex]=(1 / 2 p i)^* \int[2 \mathrm{pi}] \times(t) d t$[/tex]

[tex]=(1 / 2 \mathrm{pi}) *\left[(1 / \mathrm{A}) * \int[\mathrm{A}] \mathrm{t} d \mathrm{dt}+\mathrm{A}^* \int[\mathrm{pi}] \mathrm{dt}+0\right] \\& =(1 / 2 \mathrm{pi}) *\left[(1 / \mathrm{A}) *\left(\mathrm{~A}^{\wedge} 2 / 2\right)+\mathrm{A}(\mathrm{pi}-\mathrm{A})\right] \\[/tex]

[tex]& =(1 / 2 \mathrm{pi}) *[(\mathrm{~A} / 2)+\mathrm{A}(\mathrm{pi}-\mathrm{A})] \\& =(\mathrm{pi}-\mathrm{A} / 2 \mathrm{pi})\end{aligned}$$[/tex]

For [tex]$n=+/-1,+/-2, \ldots$[/tex], we have:

[tex]$$\begin{aligned}& D_n n=(1 / 2 p i)^* \int[2 p i] x(t) e^{\wedge}(-j n t) d t \\& =(1 / 2 p i)^*\left[(1 / A) * \int[A] t e^{\wedge}(-j n t) d t+A^* \int[\text { pi }] e^{\wedge}(-j n t) d t+0\right] \\& =(1 / 2 \text { pi })^*\left[(1 / A)^*\left((-1)^{\wedge} n-1\right)+A^*\left(1-(-1)^{\wedge} n\right) /(j n)\right] \\& =(-1)^{\wedge} n /(n A)\end{aligned}$$[/tex]

Therefore, the exponential Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$x(t)$[/tex] are:

[tex]$D_n n=\{(p i-A) / 2 p i$[/tex] for [tex]$n=0$[/tex]

[tex]$\left\{(-1)^{\wedge} n /(n \mathrm{~A})\right.$[/tex] for [tex]$n=+/-1,+/-2, \ldots$[/tex]

Using the formula for the inverse Fourier series, we can write the

To learn more about fundamental visit:

https://brainly.com/question/2224584

#SPJ11

The exponential Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$x(t)$[/tex] are:

[tex]$D_n n=\{(p i-A) / 2 p i$[/tex] for [tex]$n=0$[/tex]

[tex]\left\{(-1)^{\wedge} n /(n \mathrm{~A})\right.[/tex] for [tex]$n=+/-1,+/-2, \ldots$[/tex]

To sketch [tex]$x(t)$[/tex] over two periods from [tex]$t=0$[/tex] to [tex]$4 \mathrm{pi}$[/tex], we first need to plot one period of [tex]$x(t)$[/tex], which is given as:

[tex]$$\begin{aligned}& \mathrm{x}(\mathrm{t})=(1 / \mathrm{A}) \mathrm{t} 0 < =\mathrm{t} < \mathrm{A} \\& =\mathrm{A} \mathrm{A} < =\mathrm{t} < \mathrm{pi} \\& =0 \mathrm{pi} < =\mathrm{t} < 2 \mathrm{pi}\end{aligned}$$[/tex]

The plot of one period of [tex]x(t)[/tex] is shown below:

  |          /\

  |         /  \

A |        /    \

  |       /      \

  |      /        \

  |_____/          \_____

     0     A      pi    2pi

To sketch [tex]x(t)[/tex] over two periods, we need to repeat this pattern twice. Since [tex]x(t)[/tex] is a 2pi-periodic signal, we only need to sketch one period to represent the entire signal over any number of periods. Therefore, we can simply repeat the above plot twice to obtain the sketch of [tex]x(t)[/tex] over two periods from [tex]t = 0[/tex] to [tex]4pi[/tex], as shown below:

  |          /\          /\

  |         /  \        /  \

A |        /    \      /    \

  |       /      \    /      \

  |_____/        \__/        \_____

     0     A      pi         2pi  3pi

To find the exponential Fourier series coefficients [tex]D_n[/tex], we can use the formula:

[tex]$D_{\ldots} n=(1 / T) * \int[T] x(t) e^{\wedge}(-j n w 0 t) d t$[/tex]

where T is the period of [tex]$x(t)$[/tex], w0 is the fundamental angular frequency, and n is an integer. Since [tex]$x(t)$[/tex] is a 2pi-periodic signal, we have [tex]$T=2 p i$[/tex] and [tex]$\mathrm{wO}=2 \mathrm{pi} / \mathrm{T}=1$[/tex].

The Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$n=0,+/-1,+/-2, \ldots$[/tex] are given by:

[tex]$D_{\ldots} n=(1 / 2 p i) * \int[2 \mathrm{pi}] x(\mathrm{t}) \mathrm{e}^{\wedge}(-j n t) d t$[/tex]

For [tex]$\mathrm{n}=0$[/tex], we have:

[tex]{ D_0 }$[/tex][tex]=(1 / 2 p i)^* \int[2 \mathrm{pi}] \times(t) d t$[/tex]

[tex]=(1 / 2 \mathrm{pi}) *\left[(1 / \mathrm{A}) * \int[\mathrm{A}] \mathrm{t} d \mathrm{dt}+\mathrm{A}^* \int[\mathrm{pi}] \mathrm{dt}+0\right] \\& =(1 / 2 \mathrm{pi}) *\left[(1 / \mathrm{A}) *\left(\mathrm{~A}^{\wedge} 2 / 2\right)+\mathrm{A}(\mathrm{pi}-\mathrm{A})\right] \\[/tex]

[tex]& =(1 / 2 \mathrm{pi}) *[(\mathrm{~A} / 2)+\mathrm{A}(\mathrm{pi}-\mathrm{A})] \\& =(\mathrm{pi}-\mathrm{A} / 2 \mathrm{pi})\end{aligned}$$[/tex]

For [tex]$n=+/-1,+/-2, \ldots$[/tex], we have:

[tex]$$\begin{aligned}& D_n n=(1 / 2 p i)^* \int[2 p i] x(t) e^{\wedge}(-j n t) d t \\& =(1 / 2 p i)^*\left[(1 / A) * \int[A] t e^{\wedge}(-j n t) d t+A^* \int[\text { pi }] e^{\wedge}(-j n t) d t+0\right] \\& =(1 / 2 \text { pi })^*\left[(1 / A)^*\left((-1)^{\wedge} n-1\right)+A^*\left(1-(-1)^{\wedge} n\right) /(j n)\right] \\& =(-1)^{\wedge} n /(n A)\end{aligned}$$[/tex]

Therefore, the exponential Fourier series coefficients [tex]$D_n n$[/tex] for [tex]$x(t)$[/tex] are:

[tex]$D_n n=\{(p i-A) / 2 p i$[/tex] for [tex]$n=0$[/tex]

[tex]$\left\{(-1)^{\wedge} n /(n \mathrm{~A})\right.$[/tex] for [tex]$n=+/-1,+/-2, \ldots$[/tex]

Using the formula for the inverse Fourier series, we can write the

To learn more about fundamental visit:

https://brainly.com/question/2224584

#SPJ11

Answer:lol it was 7

Step-by-step explanation:

The probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5 is approximately 0.3446 when rounded to four decimal places.

Standard deviation is: It is a measure of how spread out numbers are. It is the square root of the Variance, and the Variance is the average of the squared differences from the Mean.

To find the probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5,

To find this probability, follow these steps:

1. Calculate the z-score for x = 80. The z-score is given by the formula: z = (x - μ) / σ
2. Look up the z-score in a standard normal distribution table (also known as a z-table) to find the corresponding probability.

Step 1: Calculate the z-score
z = (80 - 82) / 5 = -2 / 5 = -0.4

Step 2: Look up the z-score in the z-table
Looking up a z-score of -0.4 in a z-table, we find a corresponding probability of approximately 0.3446.

Learn more about the standard deviation: https://brainly.com/question/475676

#SPJ11

The probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5 is approximately 0.3446 when rounded to four decimal places.

Standard deviation is: It is a measure of how spread out numbers are. It is the square root of the Variance, and the Variance is the average of the squared differences from the Mean.

To find the probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5,

To find this probability, follow these steps:

1. Calculate the z-score for x = 80. The z-score is given by the formula: z = (x - μ) / σ
2. Look up the z-score in a standard normal distribution table (also known as a z-table) to find the corresponding probability.

Step 1: Calculate the z-score
z = (80 - 82) / 5 = -2 / 5 = -0.4

Step 2: Look up the z-score in the z-table
Looking up a z-score of -0.4 in a z-table, we find a corresponding probability of approximately 0.3446.

Learn more about the standard deviation: https://brainly.com/question/475676

#SPJ11

The correct choice is:
A. Infinity sigma n = 0 e^(-4n) = 1 / (1 - e^(-4))

To evaluate the given geometric series or state that it diverges, we need to first identify the general form of a geometric series:

Σ (from n=0 to infinity) ar^n

where 'a' is the first term and 'r' is the common ratio between consecutive terms.

In the given series, Σ (from n=0 to infinity) e^(-4n), we can identify that:

a = e^(0) = 1
r = e^(-4)

For a geometric series to converge, the common ratio 'r' must be between -1 and 1 (excluding -1 and 1):

-1 < r < 1

In this case:

-1 < e^(-4) < 1

Since the common ratio 'r' is between -1 and 1, the series converges, and we can use the formula to find the sum of an infinite geometric series:

S = a / (1 - r)

Substitute the values of 'a' and 'r':

S = 1 / (1 - e^(-4))

So, the correct choice is:

A. Infinity sigma n = 0 e^(-4n) = 1 / (1 - e^(-4))

Visit here to learn more about geometric series:

brainly.com/question/4617980

#SPJ11

The value of c is approximately -0.4055.

To find the value of c such that the sum ∑ (from n=0 to infinity) of e(nc) equals 3, we recognize this as a geometric series. For a geometric series to converge, the common ratio (r) must be between -1 and 1. In this case, r = ec.

The sum of an infinite geometric series is given by the formula S = a / (1 - r), where a is the first term and r is the common ratio.

In this problem, a = e(0c) = 1, and we want the sum S = 3. Plugging in the values:

3 = 1 / (1 - ec)

Now, solve for c:

1 - ec = 1/3
ec = 2/3

Take the natural logarithm (ln) of both sides:

ln(ec) = ln(2/3)
c = ln(2/3)

Know more about geometric series here:

https://brainly.com/question/4617980

#SPJ11

To use the Integral Test to determine whether the series is convergent or divergent, we need to evaluate the integral ∫(xe^(-9x) dx) from 1 to ∞.

Let's evaluate the integral first:

∫(xe^(-9x) dx) from 1 to ∞

We use integration by parts for this, where:

u = x, dv = e^(-9x) dx
du = dx, v = -1/9 e^(-9x)

According to the integration by parts formula, ∫u dv = uv - ∫v du.

So, ∫(xe^(-9x) dx) = -1/9 x e^(-9x) - ∫(-1/9 e^(-9x) dx)

Now, we can integrate -1/9 e^(-9x) dx:

∫(-1/9 e^(-9x) dx) = (-1/9) * (-1/9) * e^(-9x) = 1/81 e^(-9x)

Thus, our integral becomes:

-1/9 x e^(-9x) - 1/81 e^(-9x)

Now we must evaluate the integral from 1 to ∞:

lim (x→∞) [ -1/9 x e^(-9x) - 1/81 e^(-9x) ] - [ -1/9 (1) e^(-9) - 1/81 e^(-9) ]

Since the exponential term e^(-9x) approaches 0 as x approaches ∞, the limit becomes:

0 - [ -1/9 e^(-9) - 1/81 e^(-9) ] = 1/9 e^(-9) + 1/81 e^(-9)

Since the integral is finite, the series is convergent.

Visit here to learn more about Integral  : https://brainly.com/question/18125359
#SPJ11

the complete set of zeros of f(x) is:

x = 1, x = -11, and x = 10

To find the reasonable zeros of the polynomial capability[tex]f(x) = x^3 - 111x + 110[/tex], we can utilize the Normal Root Hypothesis.

Any rational zero of a polynomial function is, in accordance with this theorem, of the form p/q, where p is a factor of the constant term (in this case, 110) and q is a factor of the leading coefficient (which is 1).

So, the possible rational zeros of f(x) are:

p/q = ±1, ±2, ±5, ±10, ±11, ±22, ±55, ±110

We can now use synthetic division or long division to check which of these possible rational zeros actually are zeros of f(x). We start with p/q :

So, x - 1 is a factor of f(x), and we can write:

[tex]f(x) = (x - 1)(x^2 + x - 110)[/tex]

To find the other zeros of f(x), we need to solve the quadratic equation x^2 + x - 110 = 0. We can use the quadratic formula:

[tex]x = (-1 ± \sqrt{ (1^2 - 4(1)(-110)))} / 2(1)[/tex]

[tex]x = (-1 ± \sqrt{441}) / 2[/tex]

x = (-1 ± 21) / 2

So, the other two zeros of f(x) are:

x = -11 and x = 10

Therefore, the complete set of zeros of f(x) is:

x = 1, x = -11, and x = 10

know more about polynomial function visit :

https://brainly.com/question/12976257

#SPJ1

The limit expression sin(x sin(x)) when evaluated by continuity does not exist

The limit expression is given as

sin(x sin(x))

Where, x tends to infinity

By examining the function sin(x sin(x)), we can see that the function is a divergent series

This means that the limits diverges or the limit do not exist (DNE)

Hence, the limit expression sin(x sin(x)) where x tends to infinity does not exist

Read more about derivative at

https://brainly.com/question/5313449

#SPJ1

The limit lim x→ 8 sin(x sin(x)) can be evaluated using continuity. The answer is sin(8 sin(8)), which can be calculated approximately using a calculator.

To evaluate the limit lim x→ 8 sin(x sin(x)), we can use the fact that the composition of continuous functions is continuous. Since sin(x) is continuous for all real numbers, and x sin(x) is continuous at x = 8, we can conclude that sin(x sin(x)) is also continuous at x = 8. Therefore, the limit is equal to sin(8 sin(8)).

Using a calculator, we can calculate sin(8 sin(8)) approximately to three decimal places.

https://brainly.com/question/35736176

#SPJ12

[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]Therefore, [tex]f(y_1, y_2)[/tex] is a valid probability density function for −1 ≤ α ≤ 1, since it satisfies the non-negativity and normalization properties.

To determine if the given probability density function [tex]f(y_1, y_2)[/tex]is valid, we need to check that it satisfies the following two properties:

[tex]f(y_1, y_2)[/tex] is non-negative for all [tex](y_1, y_2)[/tex]

The integral of [tex]f(y_1, y_2)[/tex]over the entire [tex](y_1-y_2)[/tex] plane is equal to 1.

Non-negativity:

[tex]f(y_1, y_2)[/tex] is non-negative if it is greater than or equal to zero for all [tex]y_{2}[/tex] and [tex]y_{2}[/tex].

For 0 ≤ y1, 0 ≤ y2, we have

[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}]e -y_1-y_2 \geq 0[/tex]

since the term in the brackets is between 0 and 1 for −1 ≤ α ≤ 1.

For all other values of y1 and y2, f(y1, y2) is zero, which is non-negative.

Therefore, f(y1, y2) is non-negative for all (y1, y2).

Normalization:

The integral of f(y1, y2) over the entire y1-y2 plane is equal to 1, i.e.,

∫∫[tex]f(y_1, y_2)dy1dy^2[/tex] = 1

We split the integral into two parts:

∫∫[tex]f(y_1, y_2)dy_1dy_2[/tex] = ∫∫[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]

The integral on the right-hand side can be evaluated using the fact that the integral of e^(-y) over the entire positive real line is equal to 1.

∫∫[tex]f(y_1, y_2)dy_1dy_2[/tex] = ∫∫[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]

= ∫∫[tex][e -y_1 e -y_2 -e -y_1 e -y_2 (1 −-2e -y_1 )(1 - 2e y_2 )]dy_1dy_2[/tex]

= ∫0∞e −y2 dy2 ∫0∞e −y1dy1 − α∫0∞e −y2 dy2 ∫0∞e −y1dy1 ∫0∞(1 − 2e −y1 )(1 − 2e −y2) e −y1−y2dy1dy2

= 1 − α(1 − 1)(1 − 1)∫0∞e −y2 dy2 ∫0∞e −y1dy1

= 1

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1

(a) The sample mean is sufficient cannot conclude that the treatment has a significant effect.

(b) A one-tailed test with α = 0.05, is conclude that the treatment has a significant effect.

(c) A two-tailed test, We fail to reject the null hypothesis.

(d) one-tailed test with α we reject the null hypothesis

(e) A one-tailed test has a greater probability of rejecting the null hypothesis than a two-tailed test.

a. To determine if the sample mean is sufficient to conclude that the treatment has a significant effect, we need to perform a two-tailed hypothesis test:

Null hypothesis: μ = 100

Alternative hypothesis: μ ≠ 100

The level of significance is α = 0.05. Since the population standard deviation σ is known, we can use a z-test:

z = (M - μ) / (σ / √n) = (106 - 100) / (10 / √9) = 1.8

The critical values for a two-tailed test with α = 0.05 are ±1.96. Since the calculated z-value of 1.8 does not fall in the rejection region, we fail to reject the null hypothesis. Therefore, we cannot conclude that the treatment has a significant effect.

b. To perform a one-tailed test with α = 0.05, we need to change the alternative hypothesis:

Null hypothesis: μ = 100

Alternative hypothesis: μ > 100

The critical value for a one-tailed test with α = 0.05 is 1.645. Since the calculated z-value of 1.8 is greater than the critical value, we reject the null hypothesis. Therefore, we can conclude that the treatment has a significant effect.

c. If the population standard deviation is unknown, we need to use a t-test instead of a z-test. The null and alternative hypotheses are the same as in part a:

Null hypothesis: μ = 100

Alternative hypothesis: μ ≠ 100

The sample standard deviation can be used as an estimate of the population standard deviation:

t = (M - μ) / (s / √n) = (106 - 100) / (s / √9)

Since σ is unknown, we cannot use the critical values for a z-test. Instead, we need to use the t-distribution with n-1 degrees of freedom. For a two-tailed test with α = 0.05 and 8 degrees of freedom, the critical values are ±2.306. If the calculated t-value falls within the rejection region, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

d. To perform a one-tailed test with α = 0.05, we need to change the alternative hypothesis:

Null hypothesis: μ = 100

Alternative hypothesis: μ > 100

The critical value for a one-tailed test with α = 0.05 and 8 degrees of freedom is 1.859. If the calculated t-value is greater than the critical value, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

e. The magnitude of the standard deviation and the number of tails in the hypothesis test can both influence the outcome of a hypothesis test. A larger standard deviation will result in a larger standard error, which in turn will decrease the calculated t- or z-value and make it less likely to reject the null hypothesis.

The number of tails in the hypothesis also affects the outcome.  A one-tailed test has a greater probability of rejecting the null hypothesis than a two-tailed test, given the same level of significance and sample mean. However, a one-tailed test can be more susceptible to type I errors if the alternative hypothesis is not well-supported by the data.

Learn more about hypothesis test

brainly.com/question/30588452

#SPJ11

Answer:

y < 3

Step-by-step explanation:

The line is y = 3

Since it is under the line,

y < 3

Since it is dotted, it will remain as y < 3

Hope this helps and be sure to mark this as brainliest! :)

Based on the information provided, we can conclude that the average starting salary of recent graduates at the institution is likely not significantly different from the overall NACE average of $48,127.

This is because the 95% confidence interval obtained from the institution's SRS includes the NACE average.

However, it is important to note that this conclusion is limited to the specific sample size and methodology used by the institution for their survey.

The National Association of Colleges and Employers (NACE) Spring Salary Survey indicates an average starting-salary offer of $48,127 for recent college graduates.

In comparison, your institution conducted a survey using a Simple Random Sample (SRS) of 300 graduates and calculated a 95% confidence interval of ($46,382, $48,008) for their average starting salary.

In summary, the confidence interval suggests that the average starting salary of recent graduates at your institution is likely to fall between $46,382 and $48,008.

Since the NACE average of $48,127 is not within this interval, it can be concluded that there is a difference between the average starting salary at your institution and the overall NACE average, with your institution's average being slightly lower.

Visit here to learn more about Sample Size:

brainly.com/question/30509642

#SPJ11

At least 5 terms of the series are needed for the sum to be accurate to within 0.00001.

To find the smallest value of n for which the sum of the series σ^[infinity]_n=1 5/(2n-1)^4 is accurate to within 0.00001, follow these steps,

1. Recognize that the given series is a converging series since the terms are positive and decreasing.
2. Use the Remainder Estimation Theorem for alternating series, which states that the error in using the sum of the first n terms of a converging alternating series is less than the (n+1)th term.
3. In this case, the error should be less than 0.00001, so we have:
  5/(2(n+1)-1)^4 < 0.00001

4. Solve for n,
  (2(n+1)-1)^4 < 5/0.00001
  (2n+1)^4 < 500000
  n = 4.54 (approximately)

Since n must be an integer, the smallest value of n that satisfies the condition is n = 5. Therefore, at least 5 terms of the series are needed for the sum to be accurate to within 0.00001.

Learn more about "series": https://brainly.com/question/24643676

#SPJ11

The expected value of the function u(x) = x^2 for the given random variable X with pmf f(x) = 1/8 for x = -1, 0, 1 is option (B) 1/4.

The expected value of u(x) can be calculated using the formula

E(u(x)) = Σ u(x) × f(x) for all values of x

Given that the probability mass function (pmf) of X is f(x) = 1/8 for x = -1, 0, 1, we can calculate the expected value of u(x) as follows

E(u(x)) = (-1)^2 × f(-1) + 0^2 × f(0) + 1^2 × f(1)

= 1 × (1/8) + 0 × (1/8) + 1 × (1/8)

Do the arithmetic operation

= 2/8

Simplify the term

= 1/4

Therefore, the answer is option (B) 1/4.

Learn more about probability mass function here

brainly.com/question/30765833

#SPJ4

The following parts can be answered by the concept of hypothesis test.

a. To reduce the risk of a Type I error, a researcher can control the significance level or alpha level of their hypothesis test. By setting a lower alpha level (such as 0.01 instead of 0.05), the researcher is decreasing the likelihood of rejecting the null hypothesis when it is actually true.

b. To reduce the standard error, a researcher can increase the sample size of their study. As the sample size increases, the standard error decreases because there is less variability in the sample means. Additionally, ensuring that the sample is representative of the population can also help reduce standard error.

To learn more about hypothesis test here:

brainly.com/question/30588452#

#SPJ11

It is important to remember that the total probability rule refers to the sum of probabilities of intersections between A and two mutually exclusive and exhaustive events (B and BC), while the concept of independence relates to how the occurrence of one event affects the probability of another.

The total probability rule states that if we have two mutually exclusive and exhaustive events B and BC (B complement), then the probability of event A can be calculated as the sum of the probabilities of the intersections of A with both B and BC. Mathematically, this can be expressed as:

P(A) = P(A ∩ B) + P(A ∩ BC)

Now, let's discuss the term "independent". Two events are considered independent if the occurrence of one event does not affect the probability of the other event. In this case, if events A and B are independent, we can say:

P(A ∩ B) = P(A) * P(B)
P(A ∩ BC) = P(A) * P(BC)

However, the total probability rule is not dependent on whether events A and B are independent or not. It is important to remember that the total probability rule refers to the sum of probabilities of intersections between A and two mutually exclusive and exhaustive events (B and BC), while the concept of independence relates to how the occurrence of one event affects the probability of another.

to learn more about probability click here:

https://brainly.com/question/15124899

#SPJ11

The transformations of coordinates of A(2,2) is  A'' = (-1, -1) , B(1, -2) is  B'' = (0, 3) and C (4,-4) is  C'' = (-3, 5).

The coordinates are given in the figure as,

A's coordinates are (2, 2) ;

B's coordinates are (1, -2) ;

and C's coordinates are (4, -4)

The coordinates are to be transformed as A", B" and C'' as,

First invert the number's sign and then to add up 1.

Therefore,

For A" :

At x- axis, +2 becomes -2 and the by adding 1 we get, -1

Similarly at y- axis, +2 becomes -2 and the by adding 1 we get, -1

Thus, A'' = (-1, -1)

For B" :

At x- axis, +1 becomes -1 and the by adding 1 we get, 0

Similarly at y- axis, -2 becomes +2 and the by adding 1 we get, +3

Thus, B'' = (0, 3)

For C" :

At x- axis, +4 becomes -4 and the by adding 1 we get, -3

Similarly at y- axis, -4 becomes +4 and the by adding 1 we get, +5

Thus, C'' = (-3, 5)

To know more about transformations of coordinates here

https://brainly.com/question/16989680

#SPJ1

Answer:A(-1,5) B(0,1) C(-3,-1)

Step-by-step explanation:I had the question

Step-by-step explanation:

A. Each point in the image has the same x-coordinate as the corresponding point

in the figure.

D. Each point in the image moves the same distance and direction from the

figure.

These two statements are true about a figure and an image created by a translation. When a figure is translated, every point in the figure is moved the same distance and direction. This means that each point in the image has moved the same way as its corresponding point in the figure. Additionally, since a translation only involves moving a figure without changing its shape or size, the image and figure are the same shape and size, but just in different positions. As such, statement B and C are not true for figures and images created by translation.

To graph the image G'R'A'M', we need to add 10 to each x-coordinate and subtract 2 from each y-coordinate:

G': (-9+10, -9-2) = (1,-11)

R': (-8+10, -6-2) = (2,-8)

A': (-4+10, -6-2) = (6,-8)

M': (-5+10, -9-2) = (5,-11)

Graphing these points and connecting them gives us parallelogram G'R'A'M'.

Answer: its 12.92

first i multiplide 3.4 by 4.8

The singular points of the differential equation are x=0 and x=3. the correct answer is (c) 0, 3.

The singular points of a differential equation are the points where the coefficients of y'', y' or y become infinite or undefined. In this case, the given differential equation is y" + y'/x + y(x-2)/(x-3) = 0.

To find the singular points, we need to check the coefficients of y'', y', and y for any infinite or undefined values.

- The coefficient of y'' is 1, which is finite for all values of x.
- The coefficient of y' is 1/x, which is infinite at x=0.
- The coefficient of y is (x-2)/(x-3), which is undefined at x=3.

Therefore, the singular points of the differential equation are x=0 and x=3. The correct answer is (c) 0, 3.

To learn more about differential equation here:

brainly.com/question/14620493#

#SPJ11

The critical numbers of the function f(x) = [tex]x^{4} (x - 4)^{3}[/tex] are x = 0 and x = 4.

To find the critical numbers of the function f(x) = [tex]x^{4}(x - 4)^{3}[/tex], we need to find the values of x at which the derivative of f(x) is equal to zero or undefined.

First, we will find the derivative of f(x) using the product rule:

f'(x) = [tex]4x^{3} (x - 4)^{3} + x^{4} 3(x - 4)^{2}(1)[/tex]

Simplifying this expression, we get:

f'(x) = [tex]4x^{3} (x - 4)^{2} (4 - x)[/tex]

Now, we can set f'(x) equal to zero and solve for x:

[tex]4x^{3} (x - 4)^{2} (4 - x)[/tex] = 0

From this equation, we can see that the critical numbers are x = 0, x = 4, and x = 4.

To check if x = 4 is a critical number, we need to find the limit of f'(x) as x approaches 4 from the left and from the right:

lim x→4- f'(x) = lim x→4- 4[tex]x^{3}[/tex][tex](x - 4)^{2}[/tex](4 - x) = 0

lim x→4+ f'(x) = lim x→4+ 4[tex]x^{3}[/tex][tex](x - 4)^{2}[/tex](4 - x) = 0

Since both limits are equal to zero, x = 4 is a critical number.

Therefore, the critical numbers of the function f(x) = [tex]x^{4} (x - 4)^{3}[/tex] are x = 0 and x = 4.

to know more about numbers

brainly.com/question/17429689

#SPJ1

Answer:

40.82

Step-by-step explanation:

You need to use trig identities, which are sin(θ)=opposite length/hypotenuse length, cos(θ)=adjacent length/hypotenuse length, and tan(θ)=opposite length/adjacent length.

In your diagram, we see that the only available information is the length opposite of the angle x (19) and adjacent to angle x (22), so we will use the tan identity.

tan(x)=19/22

we need to solve for x, and so we need to get x alone. This can be done by using inverse tan: arctan or [tex]tan(x)^{-1}[/tex]. Note that we ARE NOT taking the equation to the exponent of -1, this is just notation for a trig identify.

arctan(x)tan(x)=x

x= arctan(19/22)

arctan(19/22)= 40.82

and so

x=40.82

The inverse Laplace transform of F(s)=(8s^2-4s+12)/s(s^2+4) is 3 + 5cos(2t) - 2sin(2t).

Explanation:

To determine the inverse Laplace transform of(8s^2-4s+12)/s(s^2+4), follow these steps:

Step 1: To find the inverse Laplace transform of F(s)=(8s^2-4s+12)/s(s^2+4), use partial fraction decomposition:

F(s) = (A/s) + (Bs+C)/(s^2+4)

Step 2: Multiplying both sides by s(s^2+4) and equating coefficients, we get:

8s^2 - 4s + 12 = A(s^2+4) + (Bs+C)s

Simplifying, we get:

8s^2 - 4s + 12 = As^2 + 4A + B*s^2 + Cs

Equating coefficients, we get:

A + B = 8

C = -4

4A = 12

Solving for A, B, and C, we get:

A = 3

B = 5

C = -4

Therefore, we can write F(s) as:

F(s) = 3/s + (5s-4)/(s^2+4)

Step 3: Taking the inverse Laplace transform of each term separately, we get:

L^-1{3/s} = 3

L^-1{(5s-4)/(s^2+4)} = 5L^-1{s/(s^2+4)} - 2L^-1{1/(s^2+4)}

Using the table of Laplace transforms, we can find that:

L^-1{s/(s^2+4)} = cos(2t)

L^-1{1/(s^2+4)} = (1/2) sin(2t)

Therefore, the inverse Laplace transform of F(s) is:

L^-1{F(s)} = 3 + 5cos(2t) - 2sin(2t). where L^-1 denotes the inverse Laplace transform operator.

Therefore, the inverse Laplace transform of (8s^2-4s+12)/s(s^2+4) is 3 + 5cos(2t) - 2sin(2t).

Know more about inverse Laplace transform click here:

https://brainly.com/question/31322563

#SPJ11

Answer:

The answer is 5ft

Step-by-step explanation:

A=L×B

A=L×W

30=6×W

30=6W

divide both sides by 6

W=5ft

Answer:

  B.  6/7

Step-by-step explanation:

You want the radius of each of two circles tangent to each other and the extended segments of ∆ABC.

Referring to the attached figure, we see that ∆EGF is similar to ∆ABC. This means EG/EF = AB/AC = 5/4.

∆AGH is also similar to ∆ABC, so we also have the proportion ...

  GH/AH = BC/AC = 3/4

In terms of radius r, GH = (3+5/4)r, and AH = r +4:

  (17/4)r / (r +4) = 3/4

  17r = 3(r +4) . . . . . . . . multiply by 4(r+4)

  14r = 12 . . . . . . . . subtract 3r

  r = 6/7 . . . . . . divide by 14, simplify

The radius of each circle is 6/7 units.

The maximum production is 3.334 at the point (k, l) is (4.022, 5.029)

To maximize production, we need to maximize the production function:

[tex]p = k^{(2/5)} * l^{(3/5)}[/tex]

subject to the budget constraint:

b = 4k + 5l = 100

We can use the method of Lagrange multipliers to solve this problem. The Lagrangian function is:

[tex]L = k^{(2/5)} * l^{(3/5)} + \lambda(100 - 4k - 5l)[/tex]

where λ is the Lagrange multiplier.

To find the critical points, we need to take the partial derivatives of L with respect to k, l, and λ, and set them equal to zero:

∂L/∂k = [tex]2/5 * k^{(-3/5)} * l^{(3/5)} - 4\lambda[/tex] = 0

∂L/∂l =[tex]3/5 * k^{(2/5)} * l^{(-2/5)} - 5\lambda[/tex] = 0

∂L/∂λ = 100 - 4k - 5l = 0

Solving these equations, we get:

k = [tex](25/6)^{(5/7)}[/tex] ≈ 4.022

l = [tex](20/3)^{(5/7)}[/tex] ≈ 5.029

λ =[tex](2/5) * (25/6)^{(-2/7)} * (20/3)^{(-3/7)}[/tex]≈ 0.327

Therefore, the maximum production is:

p =[tex]k^{(2/5)} * l^{(3/5)}[/tex] ≈ 3.334

at the point (k, l) ≈ (4.022, 5.029), subject to the budget constraint 4k + 5l = 100.

Learn more about maximize production

brainly.com/question/28963112

#SPJ11