hich of these best describes Earth’s mantle?

Most dense layer, consists of the outer and inner parts
Thinnest under the oceans and thickest under continents
Middle layer, density increases with depth as pressure increas

Answer:

it can be calculated by measuring the final distance away from a point, and then subtracting the initial distance

Answer:

Mechanical energy in Joules:

348,041,980

The total mechanical energy of the airplane is equal to 348,041,980 Joules.

Given the following data:

Scientific data:

To calculate the total mechanical energy of the airplane:

The total mechanical energy possessed by this airplane is equal to the sum of both the potential energy and kinetic energy at the given altitude.

Mathematically, the total mechanical energy is given by this formula:

[tex]E = \frac{1}{2}mv^2 + mgh[/tex]

Substituting the given parameters into the formula, we have;

[tex]E = \frac{1}{2}\times 14300 \times 214^2 + 14300 \times 9.8 \times 147\\\\E=7150 \times 45796 + 20600580\\\\E= 327441400 + 20600580[/tex]

E = 348,041,980 Joules.

Read more on mechanical energy here: brainly.com/question/17081653

Answer:

B line graph

Explanation:

sorry if I am wrong

Answer:

b

Explanation:

Answer:

1300 m/s

Explanation:

Applying,

v = λf/2............... Equation 1

Where v = velocity or speed of wave, f = frequency of wave, λ = wavelength of wave.

From the question,

Given: f = 325 Hz, λ = (12×2/3) = 8 m

Substitute these values into equation 2

v = 325(8)/2

v = 1300 m/s.

Hence the standing wave speed is 1300 m/s

The right option is 1300 m/s

Answer:

Explanation:

This is very straightforward, except that we need the mass in kg and it's in g. So we have to convert first, using the fact that there are 1000g in 1 kg:

[tex]200g*\frac{1kg}{1000g}=.200kg[/tex] and now we're ready to solve your problem.

F = ma and

120 = .200a so

a = 6.0 × 10² (which is 600 m/s/s)

Answer:

See the answer below

Explanation:

Acceleration due to gravity (g) is the accelerational force experienced by a body as a result of the influence of the earth's gravitational force. It is a vector quantity, that is, it has both magnitude and direction.

The acceleration due to gravity is inversely proportional to the square of the radius of the earth. Hence, g at the equatorial region is slightly lesser (9.780 m/s2) than that of the polar regions (9.832 m/s2) of the earth because the earth bulges at the equator leading to a higher radius than at the poles.  

Answer:200,000

Explanation:

p=w/t

200=1000/t

t=200*1000

time=200,000

Answer:

nuclear battery to generate energy

Answer:

400J

Explanation:

The work done by the force on the object is 80 J.

The work is defined by the product of force and displacement. Its unit of measurement is joule. And the formula is,

Work = Force ×Displacement

Or mathematically it is W = F.d

     [tex]F = 20N , d = 4m\\[/tex]

       W = 20 × 4

       W = 80 J

Hence the work done by the force is 80J.

Find out more information about work here:

https://brainly.com/question/11367798    

#SPJ2

Answer:

Velocidad final, V = 40 m/s

Explanation:

Dados los siguientes datos;

Aceleración = 5 m/s²

Velocidad inicial = 0 m/s (ya que comienza desde el reposo)

Tiempo = 8 segundos

Para encontrar la velocidad final, usaríamos la primera ecuación de movimiento;

[tex] V = U + at[/tex]

Dónde;

Sustituyendo en la fórmula, tenemos;

[tex] V = 0 + 5*8 [/tex]

[tex] V = 0 + 40 [/tex]

[tex] V = 40 [/tex]

Velocidad final, V = 40 m/s

Answer:

Science is a collection of knowledge about the natural world, but it is also the process of discovering how the natural world works. It is supported by evidence.

Answer: The correct answer is C). Science is a collection of knowledge about the natural world, but it is also the process of discovering how the natural world works.

Explanation:

Answer:

One simple explanation is that planets move, while stars remained fixed in the sky. You can observe a planet's orbit, but a star will stay in the same position.

Explanation:

Stars emit their own light due to thermonuclear fusion while planets have fixed orbits and they do not have their own light.

A star can be described as an astronomical body that possesses a light that causes it to reflect the light. A planet can be described as a fixed celestial body with a fixed path that spins on its own axis and reflects the light from an external source. Planets do not have an internal light source and receive light from external sources such as the Sun.

Stars have incredibly hot high temperatures while planets have relatively low temperatures. Stars produce their own light but planets are incapable of producing their own light.

Stars exhibit the unique effect of twinkling in the sky while planets do not exhibit the twinkling effect. The position of stars changes but can be seen only after a long time while planets in orbits change their positions constantly.

Learn more about stars and planets, here:

https://brainly.com/question/14412087

#SPJ5

Answer:

Protista

Explanation:

Taxonomy can be defined as the process of naming, classification and description of living organisms such as plants and animals. Thus, the biological classification of living organisms based on similarities or characteristics such as eyes, number of legs, etc., is generally referred to as taxonomy.

Basically, taxonomy helps scientist to have a good understanding and knowledge when studying various organisms.

Furthermore, the eight (8) biological classification (taxonomy) used for grouping and organizing organisms are; kingdom, domain, phylum, family, order, class, species and genus.

An organism that has only one cell, big and has a nucleus is most likely a member of Protista. Thus, a Protista such as euglena, paramecium, amoeba, etc., have a nucleus and are unicellular.

A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.

Answer:

45.11 kmph and 12.530 m/s

Explanation:

Average speed = Total distance travelled / Total time taken

406/9 gives the answer in kilometers

And we convert it to m/s by multiplying it with 1000/3600

We are given:

Mass of load = 140 kg

Acceleration = 0.4 m/s² downward (from Q24)

24. Finding the tension in the cable:

Ma = Mg - T

where 'a' is the acceleration of the load and T is the tension in the cable

replacing the variables, we get:

(140)(0.4)  = (140)(9.8) - T

T = (140)(9.8) - (140)(0.4)

T = 1372 - 56

T = 1316N

25. Finding the distance covered when the load accelerates for 20 s:

in this case, the load will start from rest

so, initial velocity = 0 m/s

acceleration = 0.4 m/s²

from the second equation of motion:

s = ut + (1/2)at²

where s is the distance covered, u is the initial velocity and t is the time taken

s = (0)(20) + (1/2)(0.4)(20)²

s = 0 + 0.2*(400)

s = 80 m

here we didn't take the acceleration due to gravity of the mass into consideration because it is connected to the crane, which would act against any forces and since we are given that the total acceleration is 0.4 m/s², we will just assume that it's the final acceleration of the mass

Answer:

Supongo que queremos determinar la carga de la carga de prueba.

Sabemos que la fuerza culombiana entre dos cargas q₁ y q₂, separadas por una distancia R, está dada por:

[tex]F = k_c*\frac{|q_1*q_2|}{R^2}[/tex]

Aislandolo para una de las cargas, obtenemos:

[tex]\frac{F*R^2}{kc*|q_1|} =|q_2|[/tex]

En este caso sabemos:

fuerza atractiva, por lo que los signos de las cargas son opuestos.

q₁  = 5 mC

R = 35cm

F = 1.5 N

Kc = 9*10^9 N*m^2/C^2

Un primer paso, seria reescribir todos los valores en las mismas unidades.

Sabiendo que:

100cm = 1m

R = 35cm = (35/100) m = 0.35m

Y sabiendo que:

1mc = 1*10^(-6) C

Entonces:

q₁  = 5 mC = 5*1*10^(-6) C = 5*10^(-6) C

Ahora podemos reemplazar esos valores en la ecuación de la fuerza, para obtener el valor de la otra carga:

[tex]\frac{15N*(0.35m)^2}{(9*10^9 N*m^2/C^2)*5*10^{-6}C} =|q_2| = 4.08*10^{-5} C[/tex]

Y recordar que las cargas tienen signo opuesto, entonces la carga de la carga de prueba es:

q₂ = -4.08*10^-5 C

Answer:

SILEM B

Explanation:

ERILAQNQJJQKIQKQJNDJKIDJKS

Answer:

f(2.5) = 16.5

General Formulas and Concepts:

Pre-Algebra

Order of Operations: BPEMDAS

Algebra I

Explanation:

Step 1: Define

Identify

[Function] f(x) = 6x + 1.5

[Given] f(2.5) is x = 2.5 for function f(x)

Step 2: Evaluate

Answer:

Negative acceleration occurs when an object slows down in the positive direction.

Negative acceleration occurs when an object speeds up in the negative direction.

Positive acceleration occurs when an object speeds up in the positive direction.

Positive acceleration occurs when an object slows down in the negative direction.

Explanation:

Basically same sign is speeding up and different sign is slowing down

Answer:

The answer is C because they have to be close to be able to interact

Answer:

C. where the electric field lines are closest together 

Explanation:

Answer:

The answer is Current.

Answer:

A

Explanation:

Opposite attract. Since electrons are negative they will be attracted to the protons because they a positive

Answer: Artificial Selection

Explanation: Artificial Selection is described as the identification of desirable traits in both plants and animals, then enhance them, so that those traits can be manifested in future generations.

This is the scope behind cross breeding of plants and animals and this have largely been used in agricultural sector to improve input (such as disease-resistant seeds) and other biotechnological settings.

Darwin's described artificial selection as the human form of natural selection.

Answer:

Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.

Explanation:

Good morning...

Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.

[tex]\huge\colorbox{purple}A\colorbox{blue}n\colorbox{purple}s\colorbox{blue}w\colorbox{purple}e\colorbox{blue}r [/tex]

[tex]\color{Violet}\rm{Hopeithelps!シ︎}[/tex]

uhm i think TRUE✨

I'm not sure hehe.

__________________________________

“The Lord your God is in your midst — a warrior bringing victory. He will create calm with his love; he will rejoice over you with singing.” — Zephaniah 3:17 ❤

__________________________________

Potential difference is measured in joules​ is true statement.

The difference in charge carriers' energy between two places in a circuit is known as the potential difference.

Voltage is another name for potential difference (p.d.), which is expressed in volts (V). When charge carriers move through electrical components in a circuit, energy is delivered to those parts. To determine the potential difference, we use a voltmeter (or voltage).

The amount of current multiplied by the resistance equals the potential difference, which is the same as voltage. One Coulomb of charge uses one Joule of energy to move between two points in a circuit, which is equal to a potential difference of one Volt.

Therefore, Potential difference is measured in joules​ is true statement.

To learn more about potential difference, refer to the link:

https://brainly.com/question/15126283

#SPJ2

Answer:

the answer for this is my.

Answer:

Moment is the product of force and its perpendicular distance from a point along its line of action.

The net moments on clockwise and anticlockwise is zero at a point.

The net force applied on a spanner handle is equal to the moment of the rotation