Answer:
2HgO <---- 2Hg + O2
Explanation:
True or false: potential energy increases as like charges get closer to one another
What is the molar mass of Mg(CIO3)2
Shivani measures out 6.0 moles of epsom salt (MgSO) to put her bath. How many grams MgSO4 went in the bath?
Answer: 720 g
Explanation:
To solve this we must be knowing each and every concept related to mole. Therefore, shivani measures out 6.0 moles of epsom salt (MgSO[tex]_4[/tex]) to put her bath. 1,566g MgSO[tex]_4[/tex] went in the bath.
What is mole?A mole is merely a measuring unit. In reality, it is one of its International System of Units' seven foundation units. When current units are insufficient, new units are created.
Chemical reactions frequently occur at levels where employing grams would be inappropriate, but using absolute quantities of atoms/molecules/ions would also be misleading.
For all practical reasons, one mole of a substance in grams is nearly equal to 1 molecule for the compound per daltons.
Mathematically,
number of mole =given mass ÷ molar mass
number of mole=6.0 moles
molar mass of epsom= 261.47g/mol
substituting all the given values in the above equation, we get
6.0 moles =mass of epsom ÷ 261.47g/mol
mass of epsom =1,566g
Therefore, 1,566g MgSO[tex]_4[/tex] went in the bath.
To know more about mole, here:
brainly.com/question/15209553
#SPJ2
What happens to the number of protons in a cation?
Answer:
number of protons is more than the number of electrons.
Explanation:
A cation is a positively charged ion.
An ion is an atom that has lost or gained electron(s). In an ion, the number of protons and electrons are not the same.
Number of protons is the number of positively charged particles
Number of electrons is the number of negatively charged particles.
For a cation, which is positively charged, the number of protons is more than the number of electrons.
Therefore, in cations, we have more protons than electrons.
A student puts some sugar in a glass of water and stirs until the sugar is dissolved.
Why is sugar dissolving in water an example of a physical change?
O because the sugar and water are both clear
B. because the sugar gives off gas bubbles when it is dissolved in the water
O c because the student started with sugar and water, and ended with sugar and water
O D. because the sugar and water molecules break apart, and then recombine in different ways
Answer:
It does not change the identity of a substance. Sugar if dissolved in water is still sugar.
Explanation:
In order to heat a round bottom flask in a heating mantle, plug the heating mantle into _______.Turn the heat up _________, and do not exceed _______ of the maximum output of the device.
Answer:
A Variac or Powermite; gradually; 50-60%.
Explanation:
A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.
Some of the laboratory apparatus (equipment) used for conducting a chemical reaction are conical flask, Bunsen burner, beaker, tongs, crucible, round bottom flask etc.
In order to heat a round bottom flask in a heating mantle, plug the heating mantle into a Variac or Powermite which is typically used for controlling the level of temperature. Turn the heat up gradually, and do not exceed 50-60% of the maximum output of the device, so as to avoid any electrical issues such as overloading, short-circuit etc.
The safety precautions that must be taken when using a round bottom flask are;
I. A proper inspection of the round bottom flask for cracks, irregularities or any imperfection.
II. Ensure you avoid heating the flask while it is closed.
III. When suspending the round bottom flask on a stand, you should ensure that you use a clamp for stability.
What is the percent composition by mass of sulfur in Na2SO4
Answer:
22.6%
Explanation:
I just answered and got it right
Which of the following is NOT true about one mole?
the number of atoms in 1 mole of carbon equals the number of atoms in 1 mole of boron
O 12 g of carbon equals one mole of carbon atoms
the mass of 1 mole of carbon atoms equals the mass of 1 mole of boron atoms
one mole contains 6.02 x 10
23
particles
The number of atoms in 1 mole of carbon equals the number of atoms in 1 mole of boron is false because the molar mass of carbon is different from that of boron. Option A is correct.
The number of moles of an element is expressed as the ratio of the mass of the substance to its molar mass.Moles = Mass/Molar massThis shows that the number of moles of the substance is dependent on the molar mass of the substance.
From the listed option the number of atoms in 1 mole of carbon equals the number of atoms in 1 mole of boron is false because the molar mass of carbon is different from that of boron
Learn more on moles here: https://brainly.com/question/24256751
How do atoms form double or triple covalent bonds?
Answer:
Covalent bonding occurs when electrons are shared between atoms. Double and triple covalent bonds occur when four or six electrons are shared between two atoms, and they are indicated in Lewis structures by drawing two or three lines connecting one atom to another.
Explanation:
If n = 7 and 1= 5 then what are the possible values of m?
4-,3-,2-,1-,0,1,2,3,4
do all atoms only have one oxidation state
CaC12 + NaCO3–>CaCO3 +NaC1
when the equation above is correctly balanced with integer coefficients the sum of the coefficients is
A:4
B:5
C:6
D:10
describe the difference between a physical and chemical change explain what happens during a checmical reaction
Explanation:
A physical change is a change that alters the physical properties of matter particularly the form and state.
In many cases the change is easily reversible. Examples are changes of state such as freezing, boiling, melting e.t.c
A chemical change is a change in which a new kind of matter is formed. It is always accompanied by energy changes which can either be evolution or absorption of heat or light or both.
The process is not easily reversible. Examples are combustion, rusting of iron, precipitation, e.t.c
During a chemical reaction, the reactants undergo a chemical change.
HELPPPPPPPPPP/AYUDAAAAAA
Answer:
*helps*
Explanation:
any two substances whih are tasteless
Answer:
Taste comes from the stimulation of chemical receptors in nerve cells on the tongue by particular chemical structures of substances. If there are no chemical structures pertaining to any of the chemical sensors, the substance would appear to be tasteless. All of these chemicals interact with the sensors with the help of the medium of saliva which has a lot of water. For example: the salt sensors might be susceptible to ions and the sweet sensors might be susceptible to hydroxyl groups on the sugars.
Now, taste is not a very precise field of study. A same substance may taste subtly different to different people. Can we be sure that water has no taste? The chemical sensors are always exposed to water. It might be that there are no sensors for water. It might also be that the signal for water is negated as a background signal. If water did have a particular taste, one thing is for certain, we would be tasting water in every bite of food and even at times when we are not eating as we always have saliva in your mouth.
Hope this helps, have a wonderful day/night, and stay safe!
What volume is occupied by 2.719 x 1013 moles of methane gas, CH4?
Answer:
6.5256×10¹⁴
Explanation:
n= v/24
v= n×25
v= 2.719×10¹³ × 24= 6.5256×10¹⁴ moles/dm³
hope it helps! please mark me brainliest
thank you! have a good day ahead
if u follow me, I will follow u back
According to ideal gas equation, the volume occupied by 2.719 x 10¹³ moles of methane gas is 6174.76×10¹³cm³.
What is ideal gas equation?The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.Ideal gases exist in hypothetical state.The law was proposed by Benoite Paul Emile Clapeyron in 1834.
Substituting values of pressure=1 atmosphere,number of moles=2.719 x 10¹³ ,R=8.314 ,T=273.15 K.
Therefore volume=nRT/P=2.719x 10¹³×8.314×273.15/1=6174.76×10¹³ cm³.
Thus, the volume occupied by 2.719 x 10¹³ moles of methane gas is 6174.76×10¹³cm³.
Learn more about ideal gas equation,here:
https://brainly.com/question/28837405
#SPJ6
Write three complete and balanced pairs of below mention electrochemical half reactions. For each pair of reactions, identify which reaction is the cathode reaction and which reaction is the anode reaction,
a. Cu → Cu2+ +2e-
b. 2H+ 2e →H2
c. O2- → 1/2O2 + 2e
Answer: a) [tex]Cu\rightarrow Cu^{2+}+2e^-[/tex] : anode
b. [tex]2H^++2e^-\rightarrow H_2[/tex] : cathode
c. [tex]O^{2-}\rightarrow \frac{1}{2}O_2+2e^-[/tex]: anode
Explanation:
Electrochemical cell is a device which converts chemical energy into electrical energy. It consist of two electrodes, anode and cathode.
Oxidation i.e. loss of electrons , which results in an increase in oxidation number occurs over anode.
Reduction i.e. gain of electrons, which results in decrease in oxidation number occurs over cathode.
a. [tex]Cu\rightarrow Cu^{2+}+2e^-[/tex] : oxidation : anode
b. [tex]2H^++2e^-\rightarrow H_2[/tex] : reduction : cathode
c. [tex]O^{2-}\rightarrow \frac{1}{2}O_2+2e^-[/tex]: oxidation : anode
Peeling a banana is an example of a
A. no change
B. chemical change
C. physical change
Answer:
C. Physical Change
Explanation:
Peeling a banana is not changing the banana's structure, it's still the same banana, but it looks different, which is a chemical change! Hope I helped!
How many moles are in 2.5 g of N2?
0.089 moles
KD 0.18 moles
1.3 moles
11 moles
Answer:
0.089
Explanation:
2.5/ 14= .178 then 0.178/ 2 again and you get 0.089
The moles of nitrogen in 2.5 grams of the compound is 0.089 moles. Thus option A is correct.
Moles can be calculated as the ratio of mass to molecular mass.
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
The mass of Nitrogen = 14 g/mol
The mass of diatomic nitrogen = 2 [tex]\times[/tex] mass of nitrogen
The mass of diatomic nitrogen = 2 [tex]\times[/tex] 14 g/mol
The mass of diatomic nitogen = 28 g/mol
The molecular weight of Nitrogen = 28g/mol
Given, the mass of Nitrogen = 2.5 g
Moles of nitrogen = [tex]\rm \dfrac{2.5}{28}[/tex]
Moles of Nitrogen = 0.089 moles.
The moles of nitrogen in 2.5 grams of the compound is 0.089 moles. Thus option A is correct.
For more information about a mole, refer to the link:
https://brainly.com/question/21898305
Rank the following in order of increasing molar mass: H2O2, I2, LiF, CH6N.
A. I2< LiF < H2O2 < CH6N
B. LiF < CH6N
C. H2O2 < LiF < I2 < CH6N
D. CH6N < H2O2 < I2 < LiF
Answer:
B. LiF < CH6N < H2O2 <I2
Explanation:
Find the molar mass of LiF
To do that, first look at the atomic mass of each element on the periodic table.
Li = 6.9 amuF = 19.0 amuBut they are one lithium atom and one fluorine atom
So you use this equation:
6.9(1) + 19.0(1) = 25.9LiF has 25.9 g/mol
Now find the molar mass of CH6N.
To do that, first look at the atomic mass of each element on the periodic table.
C = 12.0 amuH = 1.0 amuN = 14.0 amuBut they are six hydrogen atoms, one carbon atom, and one nitrogen atom.
So you use this equation:
12.0 + 1.0(6) + 14.0 = 32CH6N has 32 g/mol
Now find the molar mas of H2O2
To do that, first look at the atomic mass of each element on the periodic table.
H = 1.0 amuO = 16.0But they are two oxygen atoms and two hydrogen atoms.
So you use this equation:
1.0(2) + 16.0(2) = 34H2O2 has 34 g/mol.
Lastly, find the molar mass of I2
To do that, first look at the atomic mass of each element on the periodic table.
I = 126.9 amuBut they are two iodine atoms.
So you use this equation:
126.9(2) = 253.8I2 has 253.8 g/mol
Now that we calculated the molar mass of all elements. We rank it in the following of increasing atomic mass.
So LiF has the lowest molar mass(which is 25.9).CH6N has the second lowest molar mass(which is 32). H2O2 has the second highest molar mass(which is 34)I2 has the highest molar mass(which is 253.8)25.9 < 32 < 34 < 253.8Therefore, the final answer is B. LiF < CH6N < H2O2 <I2
Hope it helped!
Convert 0.760 atm to mmHg
Answer:
577.6 mmHg
Explanation:
What is the conversion between atm (standard atmosphere) and mmHg (millimeters of mercury)?
Multiply the atm amount by 760 to get the mmHg amount.
19/25 * 760/1
19/5 * 152/1
(19*152)/5
2888/5
577 3/5 or 577.6 mmHg
A canister containing air has a volume of 85 cm3 and a pressure of 1.45 atm when the tenoerature is 310 k. What is the pressure when the volune is increased to 180 cm3 and the temeprarje is reduced to 280 k?
Answer:
Pressure = 0.62 atm
Explanation:
[tex]V_{1}[/tex] = 85 [tex]cm^{3}[/tex], [tex]P_{1}[/tex] = 1.45 atm, [tex]T_{1}[/tex] = 310 K, [tex]V_{2}[/tex] = 180 [tex]cm^{3}[/tex], [tex]T_{2}[/tex] = 280 K.
Applying the general gas law,
[tex]\frac{P_{1} V_{1} }{T_{1} }[/tex] = [tex]\frac{P_{2} V_{2} }{T_{2} }[/tex]
[tex]\frac{1.45*85}{310}[/tex] = [tex]\frac{P_{2}*180 }{280}[/tex]
[tex]P_{2}[/tex] = [tex]\frac{1.45*85*280}{180*310}[/tex]
= [tex]\frac{34510}{55800}[/tex]
= 0.62
[tex]P_{2}[/tex] = 0.62 atm
The pressure when the volume is increased and the temperature reduced to the given values is 0.62 atm.
How many moles are in the following:
7.36 x 1024 of free Oxygen atoms
Answer: 12.2 moles
Explanation:
7.36x10^24/6.02214076x10^23 = 12.2 moles of free oxygen atoms
If the theoretical yield of a reaction was calculated to be 39.2 grams and when the experiment was conducted the amount produced was 12.7 grams, the what is the percent yield of the experiment?
Answer:
32.4%
Explanation:
%Yield = Actual Yield/Theoretical Yield x 100% = (12.7/39.2)100% = 32.4%
PLZ HELP ME!!!! BEING TIMED!!!!
Answer:
it will A. d. e. f option above
An ionic compound contains 2 potassium cations for every 1 oxygen anion. What is the chemical formula of the compound?
Answer:
Chemical formula of the compound = K₂O
Explanation:
Given:
Number of potassium cation = 2
Number of oxygen anion = 1
Cross valency
Symbol of potassium = k
Symbol of oxygen = o
So;
Chemical formula of the compound = K₂O
Which atom is most likely to partake in chemical bonding given the number of valence electrons?
A. Krypton
B. Argon
C. Xenon
D. Boron
Need help****
Answer:
D
Explanation:
I hope this helps and have a great day
What is the kinetic energy of a ball when it stops moving?
Question 2 options:
3
2
1
Answer:0
Explanation:
PLZ HELP IM NO SURE IF I PUT THE RIGHT ANSWER!!!!!!!!
that is the correct answer don't worry :))
A chemist adds 470.0 mL of a 8.8 times 10^-5 mM silver(II) oxide (AgO) solution to a reaction flask. Calculate the mass in micrograms of silver(II) oxide chemist has added to the flask. Round your answer to 2 significant digits.
Answer:
5.1 μg
Explanation:
Step 1: Given data
Volume of solution (V): 470.0 mL (0.4700 L)
Concentration of the solution (C): 8.8 × 10⁻⁵ mM (8.8 × 10⁻⁸ M)
Step 2: Calculate the moles (n) of AgO added
We will use the following expression.
n = C × V
n = 8.8 × 10⁻⁸ mol/L × 0.4700 L
n = 4.1 × 10⁻⁸ mol
Step 3: Calculate the mass (m) corresponding to 4.1 × 10⁻⁸ moles of AgO
The molar mass of AgO is 123.87 g/mol.
4.1 × 10⁻⁸ mol × 123.87 g/mol = 5.1 × 10⁻⁶ g
Step 4: Convert "m" to micrograms
We will use the conversion factor 1 g = 10⁶ μg.
5.1 × 10⁻⁶ g × 10⁶ μg/1 g = 5.1 μg