Helpppppppp plzzzzzz asaaaapppp

Considering the rule of three and molar mass of O, the mass of O²⁻ ions in 3 mol of alumina Al₂O₃ is 96 grams.

By multiplying the number of moles by the subscripts next to each atom, you get the amount of each element present in the compound. IIf the same atom appears more than once in the compound, you must add its amounts.

So, in 1 mole of Al₂O₃, you have 2 ions of O²⁻.

Then you can apply the following rule of three: if 1 mole of the compound contains 2 ions of O²⁻, 3 moles of the compound contains how many ions of O²⁻?

[tex]amount of ions of O^{2-} =\frac{3 moles of Al_{2} O_{3} x2 ions of O^{2-}}{1mole of Al_{2} O_{3} }[/tex]

amount of ions of O²⁻= 6 ions

Being the molar mass of O 16 g/mole, this is the amount of mass that a substance contains in one mole, then the mass of O²⁻ can be calculated as:

6 x 16 g/mole= 96 grams

Finally, the mass of O²⁻ ions in 3 mol of alumina Al₂O₃ is 96 grams.

Learn more about molar mass:

Answer:

It is strongly recommended that students do NOT wear contacts lenses in the laboratory. Chemical vapors may penetrate the contact lens material and cause the lens to adhere to one's eye, which could be detrimental to the eye. Goggles are not vapor tight and do not completely eliminate this absorption.

Answer:

matter cannot be created or destroyed in chemical reactions. This is the law of conservation of mass. In every chemical reaction, the same mass of matter must end up in the products as started in the reactants. Balanced chemical equations show that mass is conserved in chemical reactions.

Explanation:

Balanced Equation –

[tex]\purple{\bf{2Mg + O_2 = 2MgO}}[/tex]

Physical states –

_______________________________________

It is magnesium Oxide MgO2

Answer:

The answer is C

Can you put a brainliest for me

Explanation:

Answer:

the wavelength becomes shorter

Explanation:

frequency increases, the wavelength gets shorter. As the frequency decreases, the wavelength gets longer.

Answer:

Ammonium chloride and slacked lime

Explanation:

We can generate ammonia gas in the research centre by slowly heating ammonium chloride (NH4Cl) and slaked lime [Ca(OH)2]. Ammonia gas is lighter than air, requiring its accumulation by the descending displacement of air.

Answer:

10.C

11.B

15.A

Explanation:

Answer:

the atomic mass of the element with 37 protons,43 neutrons and 36 electrons is 80

Answer:

A reaction that has the same number and type of atoms on each side of the equation

Explanation:

A pex

Answer:  For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.

Explanation:

Rank the crystal lattice structures in order of decreasing efficiency of space in the structure.

1. Simple cubic

2. Body centered cubic

3. Face centered cubic

4. Hexegonal close packed

Answer:

1) Molar mass of NaOH can be calculated by taking the atomic mass values in the periodic table. Na (Sodium) = 22.98g/mol, O (Oxygen) = 16g/mol, H (Hydrogen) = 1.01g/mol

Add all the the mass values together for NaOH's molar mass, so (22.98 + 16 + 1.01) = 39.99 or round it to 40g/mol

2) To find the atoms from the moles, you just multiply Avogadro's number (6.02 x 10^23) by the moles.

So 3.35 x (6.02 x 10^23) = 2.0167 x 10^24 atoms are in 3.35 moles of aluminum

3) If the question is asking under standard temperature and pressure, we know that if we divide the volume by the molar volume of a gas (which is 22.7 in standard temperature and pressure), we can get the moles.  

So 101.25L / 22.7 = 4.46 mol

4) We know that to find the moles, it is the mass divided by the molar mass. If we rearrange the equation to solve for mass, we have to multiply the moles by the molar mass to get there.

Nitrogen's (N) molar mass on the periodic table is 14g/mol, but since Nitrogen is a diatomic element, it would be N2 by itself. So multiply 14 by 2, which will give you 28g/mol. N2's molar mass is 28g/mol.

Now you multiply 13.7 moles by 28g/mol, which will give you 383.6g

5) Now here I think you may have wrote the question wrong. Molecules would be at a way higher number than just 78.5, so I'm first just going to assume you meant 78.5g.

To get the moles from mass, you divide the mass of the compound by its molar mass. Molar mass of CaCO3 can be just calculated using the atomic mass values for each element in the compound (Ca is 40.07g/mol, C is 14g/mol, O3 would be 16 x 3 g/mol or just 48g/mol) and then adding them all together (40.07 + 14 + 48 = 102.07) which would give us 102.7g/mol.

Now, just divide the mass 78.5g by the molar mass 102.7g/mol

78.5/102.7 = 0.764 moles

Now on the offchance that you were actually referring to molecules, and you accidentally typed a different number doing this, you can find out the moles from the molecules by just dividing the number of molecules you have with avogadro's number (6.02 x 10^23)

So it would look something like this:

molecules of CaCO3 / 6.02 x 10^23

Answer:

The answer is designing an experiment

Explanation:

Since we already have a hypothesis, we need to test the hypothesis and this is done by designing an experiment that will do this test.

Answer:

Coca-Cola or Pepsi

Explanation:

Im sure one of those

If 25.0ml neutralizes 35.0 ml of a 0.200M HCl solution, the molarity of KOH solution is 0.28M

The reaction between KOH solution and HCl is written below.

[tex]HCl + KOH \rightarrow KCl + H_2O[/tex]

Volume of KOH, [tex]V_B[/tex] = 25.0 ml

Volume of HCl, [tex]V_A=35.0 ml[/tex]

Molarity of HCl, [tex]C_A=0.200 M[/tex]

Molarity of KOH, [tex]C_B=?[/tex]

Number of moles of HCl, [tex]n_A=1[/tex]

Number of moles of KOH, [tex]n_B=1[/tex]

The mathematical equation for neutralization reaction is:

[tex]\frac{C_AV_A}{C_BV_B} =\frac{n_A}{n_B}[/tex]

Substitute  [tex]C_A=0.200 M[/tex],  [tex]n_A=1[/tex],  [tex]n_B=1[/tex],  [tex]V_B[/tex] = 25.0 ml, and  [tex]V_A=35.0 ml[/tex] into the equation above in order to solve for [tex]C_B[/tex]

[tex]\frac{0.2 \times 35}{C_B \times 25}=\frac{1}{1} \\\\25C_B=7\\\\C_B=\frac{7}{25} \\\\C_B=0.28M[/tex]

Therefore, the molarity of KOH solution is 0.28M

Learn more on molarity here: https://brainly.com/question/17138838

Answer:

the answers are given in the photo

Answer:

a species

Explanation:

Answer: E.) C2N2H8

Explanation:

Answer:

E ) C2N2H8

Explanation:

Answer:

C

Explanation:

Answer:

It basically depends upon the pH value of that acid or Base. That's how you can determine whether the substance is a strong or weak acid/base. We have a pH scale ranging from 1 to 14, where 7 is the neutral point. Any substance having a pH of 7 means it is neither an acid nor a Base, but neutral in nature, such as water([tex]H_{2}O[/tex]). Now, if the pH is less than 7, the substance is an acid, similarly if the pH is more than 7, it is a base. As the pH DECREASES, the substance becomes more acidic, on the other hand as the pH INCREASES, the substance becomes more basic. This way you can compare between pH values of two substances and tell which one is stronger or weaker.

For Acids:

If a substance's pH is between 1 and 7 it is an acid. If it is more towards 1, it's a strong acid and if it's more towards 7 it is a weak acid.

For Bases:

If a substance's pH is between 7 and 14 it is a base. If it is more towards 14, it's a strong base and if it's more towards 7 it is a weak base.

Hope that helps...

Answer:

Atoms of these elements have full outer electron shells. These atoms are stable and very rarely form bonds with other atoms. If the electronegativity values between two atoms are comparable, they may still form chemical bonds to increase the stability of their valence electron shell

Explanation:

Answer:

0.185moles

Explanation:

1mole of bicarbonate produces 1mole of CO2

so 0.185 mole produces 0.185 moles of CO2

Let's see

[tex]\\ \sf\longmapsto Hydrochloric\:acid=HCL[/tex]

[tex]\\ \sf\longmapsto Sulphuric\:acid=H_2SO_4[/tex]

[tex]\\ \sf\longmapsto Sodium\: Chloride=NaCl[/tex]

[tex]\\ \sf\longmapsto Glucose=C_6H_12O_6[/tex]

[tex]\\ \sf\longmapsto Methane=CH_4[/tex]

.

Answer:

the molecular formulae of the following compounds are:

Hydrochloric acid: HCl

Sulphuric  acid:[tex]H_2SO_4[/tex]

sodium chloride: NaCl

glucose:[tex]C_6H_{12}O_6[/tex]

methane:[tex]CH_4[/tex]

Explanation:

Answer:

Soda and wine is the answer to your question.

Explanation:

yo make salt you need a base and an acid. in this case the base is soda and the wine is acid. hope that helps :)

Explanation:

1. b is correct because 10^-2 is 1/100. multiplying that by 1.862 is 0.01862

2. 6 feet 10 inches = 82 inches. multiplying 82 by 2.54 we get 208.28. there are only two sig figs so it's 210 cm, not 0.21 cm.

3. 25.2 x 39370 = 992000, which is 9.92 x 10^5.

Answer:

The process is to divide the molecules by Avogadro's number (6.02 x 10^23) to get the moles. And since it's specified at STP (standard temperature and pressure) we know that the molar volume would be 22.4L. So we can just multiply the moles by the molar volume in order to get the volume of H2S.

(2.18 x 10^24) / (6.02 x 10^23) = 3.62 moles (rounded)

Now just multiply the moles by the molar volume of STP, 22.4.

3.62 x 22.4 = 81 Liters (rounded) of H2S

Answer:

helium and hydrogen make up the first of these

the answer is period