Answer:
D I think
Explanation:
the 5.25 floppy disk was a significant advancement because:
Answer:
Explanation:
The storage on a hard drive was very small in those days. The 5.25 floppy allowed data created by a program to be saved so that it could be used again later. In fact, it also allowed other uses to make copies of the data because networks were very much less sophisticated as well and so direct copying (station to station) wasn't always possible.
Your network has two Distribution layer switches, Switch and Switch, connected through trunk ports on each of their respective Gi 0/1 interfaces. In addition, you recently connected an Access layer switch to the network, SwitchC. SwitchC has several workstations and a server belonging to VLAN 20. Because the resources on VLAN 20 are exclusive to the local workstations, you need to restrict VLAN 20's traffic from passing though the network on the trunk ports of SwitchC. In this lab, your task is to complete the following: Remove only VLAN 20 from the allowed VLANs on SwitchEs GigabitEthernet 0/1 and GigabitEthernet 0/2 interfaces. Save your changes to the startup-config file.
Answer:
thank you sa point labyu stay safe
How will I go about conducting the investigation on fake news
A person can go about conducting the investigation on fake news by:
Making personal researchMaking news verificationsComparing news with reputable outlets, etcFake news are those news or pieces of reporting which contains false information which is misleading to the general public.
With this in mind, it is important to verify information which you see anywhere and compare them to more reliable news outlet and also to make personal research which would be done without bias.
Read more here:
https://brainly.com/question/24560932
If you were to design a real robot that would be responsible for cleaning up trash, what 5 (or more) commands would you give it and what would each one do?
Los 5 comandos de mi robot limpiador serían: Classify, recycle, sweep, washing, and alarm.
A robot is a machine that is characterized by being controlled by a computer and programmed to move, manipulate objects and carry out work while interacting with its environment.
The 5 commands with which I would configure my robot to clean the garbage would be:
Classify: To classify the garbage, deposit the recyclable wastes and those that are not in different bags.Recycle: Take recyclable objects and process them inside to turn them into new objects such as recycled sheets of paper.Sweep: For the robot to sweep a surface and remove all kinds of dirt.Washing: This function would be to clean the dirt from a car, motorcycle, or bicycle with a jet of water under pressure.Alarm: This functions as a reminder of the days and hours in which the garbage truck passes to take the garbage to the right place.Learn more in: https://brainly.com/question/1935813
what happens to runt frames received by a cisco ethernet switch?
Answer:
thank you sa point labyu stay safe
the best program to use for keeping track of students enrolment details is
Answer:
Edmatix. Edmatix helps to record school related information for example student fees, student ID or attendance count. It is a cloud based software meaning you can backup the data much more easier.
Who is responsible for the actions of autonomous systems? (please help me :C)
The responsibility for failures was deflected away from the automated parts of the system (and the humans, such as engineers, whose control is mediated through this automation) and placed on the immediate human operators, who possessed only limited knowledge and control.
Which is better Mac os, Windows or Linux?
Answer:
[tex]Windows \: or \: Linux.......[/tex]
Company A acquired Company B and they realize that their standard security policy documents do not match. They escalate this issue to the company’s central Security team, who implements a plan to formalize security strategy, high-level responsibilities, policies and procedures around security of both companies.Which security principle is illustrated in this example?
There are various security principles employed by firm to ensure the smooth running of business and guard against risk.
The security principle illustrated in this example is GovernanceGovernance is commonly described as an oversight role. It is simply known as a way through which firms manage and contain business risks
In firm governance, there is high activism among shareholders and also high scrutiny from the regulatory bodies. The corporate boards and executive teams looks onto governance issues a lot
Conclusively, Firm governance process uses these elements such as definition and communication of corporate control, key policies, enterprise risk management, etc to boast cooperate governance.
Learn more from
https://brainly.com/question/25101437
what kind of tag will give additional info about your webpage
Answer:
The LINK tag
Explanation:
Answer:
The LINK tag
Instead of producing a clickable link, the <link> tag tells the browser that there is some additional information about this page located in a different file.
Need Help Please
Steps are in the picture.
This is for a coding class that I am taking.
I did manage to get the first step done but all of the other ones are confusing to me. I really don’t know how to write them properly. I only knew how to write the first one.
Answer:
1. siblings + 1
2. numberOfPizzas * pizzaCost
3. alienGreeting + alienGreeting2
4. color1 === color2
5. value1 - value2
6. console.log(gradeAverage === gradeAverage2)
7. numberToString + numberToString2
8. numberOfStudents / numberOfClassrooms
9. console.log(carSpeed === truckSpeed)
write an assignment that stores the remainder obtained from dividing 87 and 8 in the variable leftover (computer science python)
Answer:
answered below
Explanation:
class JavaCode :
def main(self, args) :
# write an assignment that stores the remainder obtained from dividing 87 and 8 in the variable leftover (computer science python)
leftover = int(87 / 8)
# This displays the leftover variable
print(leftover)
if __name__=="__main__":
JavaCode().main([])
Brainliest if right please answer
Answer:
b
Explanation:
hope it's helps you greatly :>
the recovery of stored information is called _____.
Answer:
it is called the memory retrieval
The recovery of stored information is called memory retrievel.
What is information?A broad concept that represents something with the potential to inform is known as "information." Information is most fundamentally concerned with the interpretation of what may be sense. Informational texts have facts and text components including glossaries, tables of contents, photos, captions, and bold print.
Retrievel is defined as a method of retrieving information from memory. Retrieval cues are stimuli that can help with memory retrieval. In a process known as "ecphory," memory retrieval involves the interaction of external sensory or internally produced cues with stored memory traces (or engrams). Ecphory has been studied in human cognitive neuroscience research, but less is known about its neurological basis.
Thus, the recovery of stored information is called memory retrievel.
To learn more about information, refer to the link below:
https://brainly.com/question/13629038
#SPJ12
hey guys can u tell me
5 advantages of spread sheet
kinda urngent ?
Explanation:
Spreadsheets Improve Data Organization.
Easing Collaborative Data Collection.
Spreadsheets Enable Dynamic Calculations With Built-In Formulas.
Spreadsheets Are Equipped With Preset Functions.
Spreadsheets Provide Functionality For Graphing And Visual Aids.
What is the very first step that should be taken when performing work with a computer?
Answer:
You should power down the system and unplug it.
I HATE THESE :/ PLS HELP
Answer:
0????????????????????
Explanation:
UHM,,, Isn't it 0 in both of them? I'm not sure, but... yeah
Answer:
10- binary
0.1 -decimal
Ways on how to conserve energy.
Here are some ways to start conserving energy yourself:
Adjust your day-to-day behaviors.
Replace your light bulbs.
Use smart power strips.
Install a programmable thermostat.
Use energy efficient appliances.
Reduce water heating expenses.
Install energy efficient windows.
Upgrade your HVAC system.
!! Please help quick !! What is one benefit of writing a modular program over writing a similar program without using modules?
write a short note on Programmable register
Answer:
A processor register (CPU register) is one of a small set of data holding places that are part of the computer processor.
A register may hold an instruction, a storage address, or any kind of data (such as a bit sequence or individual characters). Some instructions specify registers as part of the instruction. For example, an instruction may specify that the contents of two defined registers be added together and then placed in a specified register.
A register must be large enough to hold an instruction - for example, in a 64-bit computer, a register must be 64 bits in length. In some computer designs, there are smaller registers - for example, half-registers - for shorter instructions. Depending on the processor design and language rules, registers may be numbered or have arbitrary names. Here you go ;)
what is the review of Rihanna feature of MS PowerPoint
rivebkovfscuindtbkbgn
what does it mean that the right mouse button is context-sensitive?
Answer:
What does it mean that the right mouse button is "context-sensitive"? The menu items available will differ depending on the context of what you are right-clicking . You would like to add some frequently used buttons to the Quick Access Toolbar
Explanation:
which type of memory is permanently installed on your computer and attached to the motherboard?
The type of memory which is permanently installed on your computer and attached to the motherboard is: read-only memory (ROM).
A computer can be defined as an electronic device that is designed and developed to receive data in raw form as an input and then processes these data into an information (output) that could be used by an end user.
Basically, the main parts or components that make up a computer include the following;
Central processing unit (CPU).Input devices (peripherals).Output devices (peripherals).Motherboard.Memory and storage device: these are random access memory (RAM) and read-only memory (ROM).A memory refers to the available space or an electronic device that is typically used for the storage of data or any computer related information.
The two (2) main types of memory used on a computer;
I. Random access memory (RAM).
II. Read only memory (ROM).
A read-only memory (ROM) can be defined as a type of memory is designed and developed to be permanently installed on a computer and attached to the motherboard.
Read more: https://brainly.com/question/24247395
Consider the following method, which is intended to return true if at least one of the three strings s1, s2, or s3 contains the substring "art".; Otherwise, the method should return false.
public static boolean containsArt(String s1, String s2, String s3)
{
String all = s1 + s2 + s3;
return (all.indexOf("art") != -1);
}
Which of the following method calls demonstrates that the method does not work as intended?
Select one:
a. containsArt ("rattrap", "similar", "today")
b. containsArt ("start", "article", "Bart")
c. containsArt ("harm", "chortle", "crowbar")
d. containsArt ("matriculate", "carat", "arbitrary")
e. containsArt ("darkroom", "cartoon", "articulate")
a. containsArt ("rattrap", "similar", "today")
This is because the "art" is found as a combination of "similar" and "today". That is not as intended based upo
There are several ways to manipulate strings; this includes concatenating and iterating through strings.
The method call that does not work as intended is: (a) containsArt ("rattrap", "similar", "today")
From the question, we understand that the method would return true if any of s1, s2 and s3 contain the string "art"
From the list of given options, none of the strings in the method call (a) contains "art". i.e. "rattrap", "similar" and "today" do not contain "art"
But the method call would still return true.
When "rattrap", "similar" and "today" are concatenated on the first line of the method, the new string "rattrapsimilartoday" contains "art".
Hence, the method call that does not work as intended is: (a) containsArt ("rattrap", "similar", "today")
Read more about strings at:
https://brainly.com/question/16024994
There are several ways to manipulate strings; this includes concatenating and iterating through strings.
The method call that does not work as intended is: (a) containsArt ("rattrap", "similar", "today")
From the question, we understand that the method would return true if any of s1, s2 and s3 contain the string "art"
From the list of given options, none of the strings in the method call (a) contains "art". i.e. "rattrap", "similar" and "today" do not contain "art"
But the method call would still return true.
When "rattrap", "similar" and "today" are concatenated on the first line of the method, the new string "rattrapsimilartoday" contains "art".
Hence, the method call that does not work as intended is: (a) containsArt ("rattrap", "similar", "today")
Read more about strings at:
brainly.com/question/16024994
Which formula is a simple formula?
O =E10/5+1
0 -5+A1*B1
O =C3+10-E3
0 =10-(A3-D13)
Answer:
O =C3+10-E3
Explanation:
Only addition and subtraction :D
1. Which tool is used for hardware to stand on to prevent static
Answer:
An anti-static mat tool.
Explanation:
To prevent, static electricity from building up an anti-static mat tool is used. This is the tool that is used to prevent static electricity from building up. However, if you don't have the anti-static mat, an antistatic wrist strap can be used.
Choose the term that best completes each sentence.
______ is (are) the insights customers share about their experience with a product or service. It can be
compiled, and trends identified through the use of ______
Answer is customer feedback, analytics
Answer:
First is customer feedback, second is analytics
Explanation:
starting a computer loads system software to provide what?
!!help please!!
In MakeCode Arcade, what does each character in a set of data for an image represent?
Answer:
One pixel
Explanation:
Drag images onto the page to add them (only . png is currently supported). Use the toggle to switch between sprite sheets with several images and single sprites in an image. Equally, sized sprites should not have any gaps between them in spritesheets. Thus, option B is correct.
What Make Code Arcade set data for an image?To create a new game, open the Make Code Arcade editor and choose New Project. You will notice a green on start block in the editor workspace as soon as the editor loads. In the beginning, we want to make the game's main character, in this case, a paddle.
A complicated type called a sprite enables an image to appear on the screen and move about. An image that a sprite carries can be moved and located using its functions.
Therefore, Sprites can bump into one another, flip, and overlap. To make animations, sprites can also include several image frames.
Learn more about data here:
https://brainly.com/question/29409933
#SPJ2
write the code to call the function named send_signal. there are no parameters for this function.
*Assuming JavaScript
Answer:
function send_signal() {}
send_signal() // calls the function
Explanation: