HELP!! WILL GIVE 100 points.

Which term describes this molecular shape?

A. Tetrahedral

B. Linear

C. Trigonal Planar

D. Bent

Explanation:

A. mole=mass/molar mass

Molar mass of NaCl=23+35.5g

NaCl=58.5g

from

mole=0.90/58.5mol

mole=0.90g/58.5mol

mole=0.15

B. concentration=number of moles of solute/volume of solution

concentration=0.15mol/250cm^3

1dm^3=1000cm^3

250=0.25

concentration=0.6mol/dm^3

The balanced chemical reaction for this process looks like this:
[tex]Pb(NO_{3} )_{2} (aq) + 2 KCl (aq)[/tex] → [tex]PbCl_{2} (s) + 2KNO_{3} (aq)[/tex]
The reaction includes forming a precipitate.

The exact grams of the salts are unnecessary, because the chemical reaction will happen no matter the ratio, and the precipitate formed will not dissolve in excess of either reagent.

Both lead(II) nitrate and potassium chloride are salts that are very soluble in water. However, halogenides of lead (chloride, bromide, iodide) are insoluble in water (solubility decreases from chloride to iodide) and so, upon mixing of the two solution, a precipitate of lead(II) chloride will form. Potassium nitrate remains soluble, as most of potassium salts are very soluble in water.

You can learn more about precipitates here:
brainly.com/question/14865339

#SPJ4

Elements that can conduct electricity include metals. One of three classes of elements, they (the other two classes are nonmetals and metalloids). The largest of the three classes is by far metals.

Metals are all elements besides hydrogen that undergo chemical reactions and lose electrons to produce positive ions. Metals are electropositive elements as a result. They are distinguished by their brilliant brilliance, hardness, capacity for resonance, and excellence as heat- and electricity-conductors.

Brass, steel, aluminium, copper, silver, and other metals are frequently used as electrical conductors. Silver, copper, and gold are the metals that conduct electricity the best.

Among the physical characteristics used to separate the three groups are: A substance's capacity to reflect light is referred to as luster. The adjectives are often either metallic or non-metallic. The ability of a substance to carry electricity is referred to as conductivity. You might use a conductivity meter to test this.

To learn more about Elements that conduct electricity refer to:

https://brainly.com/question/4977452

#SPJ13

Velocity = Frequency x Lambda

Assuming that this is referring to an electromagnetic wave. The velocity of light is 2.998 x 10^8 m/s.

Convert the wavelength from cm to m. So divide it by 100 and you get 5.4x10^-7 meters.

2.998 x 10^8 = 5.4 x 10^-7 (λ)

Solve for λ and you get 5.55 x 10^14 Hz

The frequency of the wave is equal to 5.55 ×10¹⁴ s⁻¹.

Frequency can be defined as the number of oscillations of a wave in one second. The frequency of the wave has S.I. units which are per second or hertz.

Wavelength can be described as the distance between the two most adjacent points in phase with each other. Two adjacent crests or troughs on a wave are separated by a distance of a single wavelength.

The relationship between frequency, speed of light, and wavelength is:

c = νλ

Given, the wavelength of the wave, λ = 5.4 ×10⁻⁵ cm

Then the speed of the wave is speed of light, c = 3 ×10¹⁰ m/sc

The frequency of the waves can be calculated from the above mentioned relationship:

The frequency of the given wave will be equal to:

ν = c/λ = 3× 10¹⁰/5.4 ×10⁻⁵ = 5.55 ×10¹⁴ s⁻¹

Therefore, the frequency of the wave is equal to 5.55 ×10¹⁴ s⁻¹.

Learn more about wavelength and frequency, here:

brainly.com/question/18651058

#SPJ2

Answer:

need They need water, nutrients and sun

Both need to capture certain substances from the environment, with the only difference being the method they use. Thus, while animals ingest them with food, plants absorb them from the soil. This is the case of water and nutrients.

By using the no. of moles, the mass of AgCl formed is determined to be 23.50g.

The mass of a material that includes the substance's particles is referred to as a mole.

The number of moles of a material equals to the ratio of its given mass to the mass of one mole of that substance in a chemical reaction. A mole / the no. of moles of any substance is equal to Avogadro's number, which is 6.023 x [tex]10^{23}[/tex]. Additionally, no. of moles is employed to represent concentration measurements like mole per liter and molecular weight.

[tex]2AgNO_3 (aq) + CaCl_2 (aq) \rightarrow 2AgCl (s) + Ca(NO_3)_2 (aq)[/tex]

Since [tex]AgNO_3[/tex] is in excess, the amount of product formed will be decided by the quantity of [tex]CaCl_2[/tex], which is the limiting reagent.

1 mole of [tex]CaCl_2[/tex] produces 2 moles of AgCl

No. of moles of [tex]CaCl_2[/tex] = mass of [tex]CaCl_2[/tex] / molar mass of [tex]CaCl_2[/tex]

No. of moles of [tex]CaCl_2[/tex] = 9.11 / 110.98 = 0.0820 moles

No. of moles of AgCl formed = 2 x 0.0820 = 0.164 moles

Mass of AgCl formed = No. of moles x molar mass

Mass of AgCl formed = 0.164 x 143.3 = 23.5012g

Result:

23.50g of AgCl is formed.

Learn more about No. of moles here:

https://brainly.com/question/20486415

#SPJ4

The value of concentration of [tex]H^{+}[/tex] and [tex]OH^{-}[/tex]  of three solutions whose pH  is given are ,

( a ) The  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is 0.11 M and  7.28 × [tex]10^{-6}[/tex] M.

( b ) The  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is  4.69 × [tex]10^{-6}[/tex] M and  0.177 M .

( c ) The  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is 0.002 M and  3.28 × [tex]10^{-4}[/tex] M .

( a )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

Given pH =  2.17

then pH = - ㏒ [  [tex]H^{+}[/tex] ] = 2.17

[  [tex]H^{+}[/tex] ]  = 0.11 M

pH + pOH = 14

pOH =   14 - pH =  14 -  2.17 = 11.83

pOH =  - ㏒ [  [tex]OH^{-}[/tex] ] = 11.83

[  [tex]OH^{-}[/tex] ]  = 7.28 × [tex]10^{-6}[/tex] M

Therefore , the  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is 0.11 M and  7.28 × [tex]10^{-6}[/tex] M.

( b )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

Given pH =  5.96

then pH = - ㏒ [  [tex]H^{+}[/tex] ] = 12.27

[  [tex]H^{+}[/tex] ]  = 4.69 × [tex]10^{-6}[/tex] M

pH + pOH = 14

pOH =   14 - pH =  14 -  12.27= 1.73

pOH =  - ㏒ [  [tex]OH^{-}[/tex] ] = 1.73

[  [tex]OH^{-}[/tex] ]  = 0.177 M

Therefore , the  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is 4.69 × [tex]10^{-6}[/tex] M and  0.177 M .

( c )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

Given pH =  5.96

then pH = - ㏒ [  [tex]H^{+}[/tex] ] = 5.96

[  [tex]H^{+}[/tex] ]  = 0.002 M

pH + pOH = 14

pOH =   14 - pH =  14 -  5.96 = 8.04

pOH =  - ㏒ [  [tex]OH^{-}[/tex] ] = 8.04

[  [tex]OH^{-}[/tex] ]  = 3.28 × [tex]10^{-4}[/tex] M

Therefore , the  [tex]H^{+}[/tex] and [tex]OH^{-}[/tex] of  solution is 0.002 M and  3.28 × [tex]10^{-4}[/tex] M .

to learn more about solutions here ,

brainly.com/question/7932885

#SPJ1

Gravitational force between the moon and the astronaut change are decrease

The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them

We can visualize the effect mathematically via the equation for newton's law of gravitation

Fgrav = Gm₁m₂/r₂

From this relationship, we can see that force Fgrav and square of the distance rare inversely proportional as one increases the other decreases

Therefore, as the distance between the astronaut and earth increases, the magnitude of the gravitational force will decrease

Know more about gravitational force

https://brainly.com/question/7579694

#SPJ1

In Bohr's Model of the atom, the option that is included  is option b, c and e:

As long as the energy of the photon was equal to the energy difference between the beginning and final energy levels, the Bohr model predicts that an electron would take in energy in the form of photons to be excited to a higher energy level.

The ground state, which describes the electrons when they are at their lowest energy, is typical. An atom's electrons can absorb energy by moving up to a higher energy level, or excited state, if they are supplied energy (via heat, electricity, as well as light, etc.).

Learn more about Bohr's Model from

https://brainly.com/question/20688647
#SPJ1

Due to how simple it is to convert this gas to a liquid, it is known as liquefied gas. LPG can be converted from a gas to a liquid by applying low pressure or refrigeration.

Liquefied petroleum gas (LPG) is a fuel used in a variety of home appliances for heating, cooking, and producing hot water. Due to how simple it is to convert this gas to a liquid, it is known as liquefied gas. LPG can be converted from a gas to a liquid by applying low pressure or refrigeration. LPG is originally used for gas burners, cooktops, and ovens because these equipment, together with heaters, fireplaces, and gas hot water systems, are common in homes. Gas-powered dryers are also available.

Examples of outdoor gas equipment include fire pits, pizza ovens, patio heaters, rooftop fireplaces, and BBQs. Propylene, butane, isobutan butylenes,e, and combinations of these gases make up the majority of LPG.

To know more about LPG visit:

https://brainly.com/question/22425958

#SPJ9

The volume of O₂ produced at STP after 5.0g of KCIO3 is decomposed is 1.317L.

For experimental measurements to be established under standard conditions that allow for comparisons between various sets of data, standard temperature and pressure must be met. The nominal atmospheric conditions at sea level are referred to as "standard temperature and pressure" (STP). The temperature and pressure are both zero degrees Celsius (atm). STP, or Standard Temperature and Pressure, refers. 2. The STP value of gas temperature, according to IUPAC, is 15 K. 2. According to IUPAC, gas is at 15 K in the STP. VSTP is equal to V* (273.15/T)* (P/760) Kelvins, Torrs, and Liters are used in the STP formula. The number of gas molecules at a standard temperature and pressure, or STP, has been calculated using this law. STP is measured in Kelvin and atmospheres.

39.01 g [tex]mol^{-1}[/tex]  +  35.45 g[tex]mol^{-1}[/tex]   + 3.1600 g[tex]mol^{-1}[/tex]

= 122.46 g[tex]mol^{-1}[/tex]

To get the material's molecular weight, divide the overall mass of the substance by its relative mass.

5g/ 122.46g[tex]mol^{-1}[/tex]  = 0.041mol

There are two moles of KLC[tex]CO_{3}[/tex]  for every 3 moles of [tex]O_{2}[/tex] , that can be seen from the equation. Using the ratio 2:3 and inserting 0.048 mol we find that there must be 0.0612 mol [tex]O_{2}[/tex].

At STP (standard temperature and pressure), a mole of an ideal gas takes up 22.4 liters.

Hence

22.4 l[tex]mol^{-1}[/tex] × 0.0612 mol

= 1.317 L

To know more about STP, visit:

https://brainly.com/question/15593407

#SPJ9

Answer:

That is it are you okay.

Explanation:

thank you

Dietary fats include saturated fat. Along with trans fat, it is one of the harmful fats. Most of the time, these fats are solid at room temperature. High quantities of saturated fat are found in foods like butter, palm and coconut oils, cheese, and red meat.

Stearic acid, palmitic acid, myristic acid, and lauric acid are examples of typical dietary saturated fatty acids.

Each carbon molecule in saturated fat is bonded to hydrogen, or "saturated," as a result of which the molecules are stable when the fat is cooked. As a result, heat won't cause them to oxidize or go rancid. The finest fats to use while cooking at temperatures above 180°C are saturated fats.

Unsaturated fats, which are liquid at room temperature, are regarded as healthy fats because they have a range of positive effects on health, including lower blood cholesterol levels, less inflammation, stable cardiac rhythms, and more.

The more polyunsaturated a fat is, the quicker it will oxidize since unsaturated fats are more prone to oxidation than saturated fats. Due to the more brittle double bonds, which permit more oxygen to react at those sites, this has occurred.

To know more about fats, click on the link below:

https://brainly.com/question/24186437

#SPJ9

The given question is incomplete the complete question is  

The police have made a drug bust and confiscated a large quantity of suspected cocaine. The police bring a sample to you, a forensic chemist, for analysis. The chemical formula of cocaine is C17H21NO4. After analyzing the mystery compound you find that it is 67.296% carbon,6.991% hydrogen, 4.618% nitrogen, and 21.095% oxygen. You also find that it has a molar mass of 303.35g/mol

Calculate the mystery compound’s empirical formula. Show full solutions.

The police have made a drug bust and confiscated a large quantity of suspected cocaine the police bring a sample to you, a forensic chemist, for analysis the chemical formula of cocaine is C₁₇H₂₁NO₄. After analyzing the mystery compound you find that it is 67.296% carbon,6.991% hydrogen, 4.618% nitrogen, and 21.095% oxygen. You also find that it has a molar mass of 303.35g/mol and the mystery compound is  C₁₇H₂₁NO₄  means cocaine

The cocaine is the local anesthetic and it is also used for to cause loss of feeling or numbness and drug is the any substances that is used to prevent, diagnose, treat and relieve symptoms of abnormal condition and drugs can also affect how the brain and the rest of the body work and cause changes in mood, awareness, thoughts, feelings, or behavior

Here given chemical formula of cocaine is C₁₇H₂₁NO₄ and in that carbon percentage is 67.296%  and hydrogen percentage is ,6.991%,  nitrogen percentage is 4.618%, and oxygen percentage is 21.095% and given molar mass is 303.35g/mol then

We have to find mystery compound’s empirical formula =?

So given mass/molar mass

Then we have to find mole ratio and number of moles so here 67.296% carbon then  67.296/303.35g/mol = 0.22g

6.991% hydrogen = 6.991/303.35g/mol = 0.023g

4.618% nitrogen = 4.618/303.35g/mol  = 0.015g

21.095% oxygen = 21.095/303.35g/mol = 0.069g

Mass of carbon/molar mass of carbon

67.296/12 = 5.6 mole

Mass of hydrogen/molar mass of hydrogen

6.991/1 = 6.9 mole

Mass of oxygen/molar mass of oxygen

21.095/16 = 1.3 mole

Mass of nitrogen/molar mass of nitrogen

4.618/14 = 0.32 mole

So now dividing the smallest mole then in that 0.32 is the smallest mole

5.6 mole carbon/0.32 mole = 17

6.9 mole hydrogen/0.32 mole = 21

1.3 mole of oxygen/0.32 mole = 4

0.32 mole of nitrogen/ 0.32 mole = 1

So the empirical formula is C = 17, H = 21, O = 4, N = 1

So, C₁₇H₂₁NO₄

And the mystery compound is C₁₇H₂₁NO₄

Know more about cocaine

https://brainly.com/question/28716591

#SPJ1

Answer: the speed of something in a given direction

Explanation:

yuuuuuuh

Answer:

Velocity defines the direction of the movement of the body or the object.

Explanation:

velocity is the speed of motion, action, or operation

Answer: Cubic meters: .01176

Liters: 11.76

Cubic inches: 717.639231

Cubic feet: 0.415300481

Explanation:

Answer:

Breaking the bread

Explanation:

Because you're just breaking the bread into pieces.

Answer:

Potassium has one electron in its valence shell(2,8,8,1) so during the reaction of potassium and fluorine that 1 electron is completely transferred to fluorine (by ionic bonding) which has 7 electrons in its outer shell(2,7). After getting an electron from potassium, it has 8 electrons in its outer shell which makes it more stable.Because Potassium lost 1 electron it is also stable as potassium now has 8 electrons in its outer shell.Potassium now has a +1 charge while fluorine has a -1 charge.

Please mark as brainliest

The density of the metal cube is  7.874 kg/m³

Density is a word we use to describe how much space an object or substance takes up means its volume in relation to the amount of matter in that object or substance means its mass and another way to put it is that density is the amount of mass per unit of volume and if an object is heavy and compact it has a high density

Here given data is metal cube with a volume = 20 cubic centimeters and mass = 157.48 gram so we have to find density of the metal cube = ?

So, density = mass/volume means ρ = m/V

Density = 157.48 gram/20 cubic centimeters

Density = 7.874 kg/m³

The density of the metal cube is  7.874 kg/m³

Know more about density

https://brainly.com/question/13695511

#SPJ1

The enthalpy of reaction for the solution of barium sulphate and sodium nitrate in a coffee cup calorimeter is 1170.4 J.

The enthalpy associated with a reaction is the heat absorbed or released by the reaction system. In a coffee cup calorimeter, the reaction enthalpy is equal to the heat change in the reaction system.

The reaction enthalpy is calculated as follows:

ΔH (rxn) = cmΔT, where c is specific heat capacity.

c for barium sulphate solution is 4.18 J/(g K) and weight is 200 with a temperature change if 23.5 degree Celsius (296.65 K) to 24.9 (298.05 K).

Apply these values to the equation above.

ΔH (rxn) = (4.18 J/(g K) × 200 g) ×(298.05-296.65)K = 1170.4 J.

Hence, enthalpy of the given reaction is 1170.4 J.

To know more about reaction enthalpy, refer the link below:

https://brainly.com/question/24939435

#SPJ1

To slow down that particular cellular activity by controlling the enzyme we wil decrease the temperature of the incubator where the cells are growing.

Anselme Payen was the first to discover an enzyme. A biological catalyst which alter the rate of the chemical reaction is known as Enzyme. It is not destroyed during the reaction and is used over and over. These are proteins made up of of amino acids linked together in one or more polypeptide chains.

We need to  decrease the temperature of the incubator where the cells are growing to slow down that particular cellular activity by controlling the enzyme.

To know more about Enzymes refer to the link:

https://brainly.com/question/14577353

#SPJ9

The law of conservation of mass states that "the mass of the reactants is equal to the mass of the products." This statement is accurate.Additionally, in a chemical equation, the number of atoms of different elements on the reactants side equals the number of atoms on the products side.

Which of the following statements is true of this reaction?

    To learn more about chemical reactions refer

     https://brainly.com/question/16416932#

     #SPJ13

Five observable properties for separating mixtures are particle size, colour, texture, shape, magnetic attraction.

Mixtures are compounds that are made up of two or more chemical compounds which are not linked to each other chemically. They can be easily separated.

The mixtures can be separated by properties like particle size, colour, density, shape, magnetic attraction.

Sieving can be used to separate compounds based on particle size. Chromatography can be used to separate compounds based on colour as each colour would have differences in properties. Flotation can be used to separate compounds based on density like oil in water. Centrifugation can be used to separate compounds based on shape. Magnetic separation can be used to separate metals from non-metal compounds in a mixture.

To know more about Mixtures

https://brainly.com/question/24898889

#SPJ1

The classification of the reactions are;

water → hydrogen + oxygen - decomposition

iron + oxygen → iron oxide - Oxidation

The term chemical reaction has to do with an interaction that occurs between the reactants and the products so that  new substance can be formed. This is how we know that a chemical change has occurred.

We are here to sort the reactions according to the kind of changes that they represent. Recall that we do have several kinds of reactions that do take place and they are classified based on the kind of changes that are taking place there.

Learn more about reactions:https://brainly.com/question/28270550

#SPJ1

Jupiter have the force of gravity 2.54 times that of earth

To learn more about : Jupiter

Ref : https://brainly.com/question/15837758

#jsp2

The zinc reacts with hydrochloric acid which produces hydrogen gas along with zinc chloride, and we determine the reaction because the hydrogen gas is formed.

We know that when the zinc reacts with the hydrochloric acid, then this reaction bubbles vigorously so hydrogen gas is produced. The production of hydrogen gas is also proof that a chemical reaction is occurring.

The zinc reacts quickly with the hydrochloric acid for the formation of zinc chloride and hydrogen gas. These reactions occur in a single displacement reaction where zinc metal displaces the hydrogen to form hydrogen gas and zinc chloride.

This reaction is an exothermic reaction that produces a big amount of heat. Zn + 2HCl → ZnCl₂ + H₂

So we can conclude that hydrogen gas and zinc chloride are formed when the zinc reacts with hydrochloric acid.

Learn more about Zinc here: https://brainly.com/question/15678491

#SPJ1

Answer:

Balancing a chemical equation involves a certain amount of trial and error. In general, however, you should follow these steps:

Count each type of atom in reactants and products. Does the same number of each atom appear on both sides of the arrow? If not, the equation is not balanced, and you need to go to step 2.

Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances. Use the smallest coefficients possible. Warning! Never change the subscripts in chemical formulas. Changing subscripts changes the substances involved in the reaction. Change only the coefficients.

Repeat steps 1 and 2 until the equation is balanced.

Explanation:

The equation for gravitational potential energy is GPE = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 on Earth), and h is the height above the ground in meters.

So there for larger objects have greater cause an object with greater mass will have more gravitational potential energy than an object with less mass, when the objects are at the same height.

( a ) The pH of 5.9 × [tex]10^{-8}[/tex]  M hydronium-ion concentrations is 7.22 .

( b ) The pH of 3.5 × [tex]10^{-12}[/tex]  M hydronium-ion concentrations is 11.45

( c ) The pH of 7.0 × [tex]10^{-3}[/tex]  M hydronium-ion concentrations is 2.14 .

( d ) The pH of 6.66× [tex]10^{-9}[/tex]  M hydronium-ion concentrations is 8.17

( a )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 5.9 × [tex]10^{-8}[/tex]  M ]

pH = 7.22

Therefore , the pH of 5.9 × [tex]10^{-8}[/tex]  M hydronium-ion concentrations is 7.22 .

( b )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 3.5 × [tex]10^{-12}[/tex]  M ]

pH = 11.45

Therefore , the pH of 3.5 × [tex]10^{-12}[/tex]  M hydronium-ion concentrations is 11.45 .

( c )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 7.0 × [tex]10^{-3}[/tex]  M ]

pH = 2.14

Therefore , the pH of 7.0 × [tex]10^{-3}[/tex]  M hydronium-ion concentrations is 2.14 .

( d )

pH = - ㏒ [  [tex]H^{+}[/tex] ]

pH = - ㏒ [ 6.66× [tex]10^{-9}[/tex]  M ]

pH = 8.17

Therefore , the pH of 6.66× [tex]10^{-9}[/tex]  M hydronium-ion concentrations is 8.17

to learn more about hydronium ion here ,

https://brainly.com/question/14619642

#SPJ1

i do not know much about that

A reference value is provided by the control, which can then be compared to the samples in which the value of a variable was altered.

This is further explained below.

Generally, Control is a management function that aids in mistake detection and the implementation of remedial measures.

This is done to reduce departure from standards and make that the organization's stated objectives are met in the desired way.

In conclusion, The control offers a standard against which samples with varying changes may be measured.

Read more about control

https://brainly.com/question/14782348

#SPJ1