help pls i need this right now

Answer:

B

Explanation:

1 minute = 60 seconds

2 minutes = 2 * 60 = 120 seconds.

d = r * t

t = 120 seconds

d = 500 meters

r = d/t

r = 500 / 120 = 4.167 m/s

The closest answer is B

Answer:

1. Joule

2. Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1).

3. heat capacity units

Heat is a thermal energy, so by using heat capacity units you can compare the ability of olive oil and peanut oil to gain or lose thermal energy by varying its temperature.

Answer:

Which is the metric standard for measuring energy?

✔ joules

Which unit is used for specific heat capacity?

✔ J/g°C

If you wanted to compare the abilities of olive oil and peanut oil to gain or lose thermal energy, which unit would you use?

✔ J/g°C

Explanation:

did it on edge 2023

Answer:

8649 J

Explanation:

KE = 1/2mv^2

1/2(50)(18.6)^2

1/2(50)(345.96) = 8649 J

Answer:

as much as the wind is blowing has

Answer:

well, mercury is the closest planet to the sun, making it MUCH hotter than earth. that being said, just because mercury is closest to the sun, it doesnt mean its the hottest planet.

Since Mercury is the planet that is nearest to the sun, it is much hotter than the earth. However, because Mercury is nearest to the sun doesn't automatically make it the hottest planet.

A huge, spherical celestial object, it is neither a star it nor remnant is called a planet. The nebular concept, which holds how an interplanetary cloud collapse out of a nebula to produce a young white dwarf orbited by a planetary system, is the best theory currently available for explaining planet formation.

The slow buildup of matter propelled by gravity—a practice called as accumulation, to the formation of planets in this disk. The rocky planets Mercury, Venus, Earth, and Mars, as well as the giant planets Jupiter, Saturn, Uranus, and Neptune, make up the Solar System's minimum number of eight planets. Each of these planets revolves around an axis that really is inclined with regard to its orbit pole.

To know more about Planet:

https://brainly.com/question/14581221

#SPJ2

Answer:

6.38 * 10^14 Hz

Explanation:

Answer:

D

Explanation:

She says that the object of the experiment is to see how far the string stretches given a mass attached to the string.

The only thing that is at issue is either the mass or the amount the string stretches.

Nothing else matters.

The dependent variable therefore is the amount the string stretches. So the last choice is the answer.

Answer:

Hertz is the S.I. unit of frequency and is used to measure a wave's frequency . So, option A frequency is the correct answer.

Answer: C

Explanation:

The pendulum will have the most energy at the bottom of its swing

c. At point C  the pendulum have the most kinetic energy.

Kinetic energy is a form of energy that an object or a particle has by reason of its motion.

If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

Kinetic energy is defined as:

⇒E = 1/2mv²

Here, the mass of the pendulum bob won't change, the only way for kinetic energy to change is for the speed of the pendulum to change. Kinetic energy is highest when the velocity is the highest.

This occurs at the bottom of the pendulum. An active pendulum has the most kinetic energy at the lowest point of its swing when the weight is moving fastest.

Therefore,

At point C  the pendulum have the most kinetic energy.

Learn more about Kinetic energy here:

https://brainly.com/question/999862

#SPJ5

Answer:

1) El diámetro es de aproximadamente 913,987 cm.

2) La fuerza del cilindro es 5576850 kgf

Explanation:

1) Los parámetros dados son;

El volumen del aire = 13,122 litros = 13122000 cm³

La presión de trabajo = 8.5 kgf / cm²

La longitud del cilindro = 20 cm.

Por lo tanto, tenemos;

El área de la base del cilindro = π · r² = 13122000 cm³ / (20 cm) = 656100 cm²

r = √ (656100 / π) ≈ 456,994 cm

El diámetro = 2 × r ≈ 2 × 456.994 ≈ 913.987 cm

El diámetro ≈ 913,987 cm

2) La fuerza del cilindro = El área de la base del cilindro × La presión de trabajo

∴ La fuerza del cilindro = 656100 cm² × 8.5 kgf / cm² = 5576850 kgf

La fuerza del cilindro = 5576850 kgf

Distance walked to the west= 15m

" " " " north= 20m

" " " " east = 15m

Total Distance= (15+ 20+ 15) m

= 50m

Asha covered 50m distance in total.

Answer:

The amount of work the factory worker must to stop the rolling ramp is 294 joules

Explanation:

The object rolling down the frictionless ramp has the following parameters;

The mass of the object = 10 kg

The height from which the object is rolled = 3 meters

The work done by the factory worker to stop the rolling ramp = The initial potential energy, P.E., of the ramp

Where;

The potential energy P.E. = m × g × h

m = The mass of the ramp = 10 kg

g = The acceleration due to gravity = 9.8 m/s²

h = The height from which the object rolls down = 3 m

Therefore, we have;

P.E. = 10 kg × 9.8 m/s² × 3 m = 294 Joules

The work done by the factory worker to stop the rolling ramp = P.E. = 294 joules

Answer: DC Current

Explanation:

Battery is a source of constant potential difference and it will create a constant voltage across any conductor

due to this constant voltage difference the current in this conductor will remain constant

So here since the voltage across the conductor is constant so we can say that current in the conductor will remain constant and hence this is known as DC current.

While for variable current in direction and magnitude is to be obtained only when the conductor is connected with AC voltage source as we know that AC voltage is variable with magnitude and direction both

A battery is the power source for DC type of current.  A battery is a source of constant potential difference that produces a constant current unlike in AC source where the voltage and hence the current changes its polarity continuously.Hence, the current produced by battery is direct current and not Alternating current.

Hope this helps........ Stay safe and have a Merry Christmas!!!!!! :D

Answer:

the weight of an object is the force acting on the object due to gravity. the gravitational force acting on the object. Others define weight as a scalar quantity, the magnitude of the gravitational force.

Explanation:

Answer:

A

Explanation:

where the hole is because it's a rigid object with uniform density.

Answer:

42°

Explanation:

From the question given above, the following data were obtained:

Refractive index (n) = 1.5

Critical angle (C) =?

The refractive index and the critical angle are related according to the following reaction:

n = 1 / Sine C

Thus, with the above formula, we can obtain the critical angle as follow:

Refractive index (n) = 1.5

Critical angle (C) =?

n = 1 / Sine C

1.5 = 1 / Sine C

Cross multiply

1.5 × Sine C = 1

Divide both side by 1.5

Sine C = 1 / 1.5

Sine C = 0.6667

Take the inverse of sine

C = Sine¯¹ (0.6667)

C = 41.8 ≈ 42°

Thus, the critical angle is approximately

42°.

Answer:

The final velocity of the train and the moose after collision is approximately 19.51 m/s

Explanation:

The given mass of the moose, m₁ = 250 kg

The velocity of the moose, v₁ = 0

The mass of the oncoming train, m₂ = 10,000 kg

The velocity of the train, v₂ = 20 m/s

The velocity of the moose and the train after collision = v₃

By the principle of conservation of linear momentum, the total initial momentum before the collision = The total final momentum after collision

m₁·v₁ + m₂·v₂ = (m₁ + m₂)·v₃

Therefore, by substitution, we have;

250×0 + 10,000× 20 = (10,000 + 250) × v₃

200,000 = 10,250 × v₃

v₃ = 200,000/10,250 ≈ 19.51 m/s

The final velocity of the train and the moose after collision = v₃ ≈ 19.51 m/s

Answer: The work done on the flagstone is 20178 J

Explanation:

Power is the rate at which work is done . It is equal to the amount of work done divided by the time it takes to do the work.

[tex]Work=Power\times time[/tex]

Given : work = ?

Power = 342 W = 342J/s

Time = 59 s

[tex]Work=342J/s\times 59s=20178J[/tex]

Thus the work done on the flagstone is 20178 J

Answer:

Object A has 3 times the mass of object B.

Explanation:

Have a nice rest of your day :)

Answer:

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question is we have

force = 75 × 12

We have the final answer as

Hope this helps you

Answer:

Butane is a four member carbon chain.

The properties of butane are as follows.

Butane is less denser than water.

In the presence of air, it readily burns to form water vapour and carbon dioxide. The reaction is as follows.

It has a boiling point of .

Butane has faint petroleum like odor.

Butane does not react with water.

Butane has weak dispersion force and water has strong hydrogen bonding.  The weak dispersion force is unable to break the hydrogen bonding hence, butane does not dissolve in water.

Thus, we can conclude that the chemical properties butane burns readily in air and does not react with water are true out of the given list of options.

Explanation:

Answer:

[tex]2365.71\ \text{J/kg}^{\circ}\text{C}[/tex]

Explanation:

V = Voltage = 230 V

I = Current = 1.8 A

[tex]\Delta T[/tex] = Temperature change = [tex](40-12)^{\circ}\text{C}[/tex]

t = Time taken = 2 minutes

m = Mass of liquid = 750 g

c = Specific heat capacity of the liquid

Energy required to heat the water is equal to the heat released due to current passing

[tex]mc\Delta T=VIt\\\Rightarrow c=\dfrac{VIt}{m\Delta T}\\\Rightarrow c=\dfrac{230\times 1.8\times 2\times 60}{0.75\times (40-12)}\\\Rightarrow c=2365.71\ \text{J/kg}^{\circ}\text{C}[/tex]

The specific heat capacity of the liquid is [tex]2365.71\ \text{J/kg}^{\circ}\text{C}[/tex]

Answer: 4

Explanation:

The dependent variable is the temperature of the water.

Answer:

vf = 50 m/s

Explanation:

The equation for this kinematic problem is:

vf = vi + at

We are given:

a = 10m/s^2

vi = 0m/s

t = 5 sec

vf = ?

Solve for final velocity:

vf = 0 + 10(5)

vf = 50 m/s

Explanation:

Let the mass of the body is m. The gravitational force acting on the object is given by :

[tex]F=\dfrac{GMm}{r^2}[/tex] ....(1)

G is universal gravitational constant

M is mass of Earth

r is the distance between the body

The acceleration of falling objects due to the gravitational force of Earth is equal to the acceleration due to gravity (g).

F = mg ...(2)

g is acceleration due to gravity

From equation (1) and (2) :

[tex]\dfrac{GMm}{r^2}=mg\\\\g=\dfrac{GM}{r^2}[/tex]

Here, M is mass of Earth and r is the distance. Hence, the acceleration due to gravi ty is independent to the mass of the falling body

d

I think the most common way of doing it was for the first

Answer:

Following are the solution to the given points:

Explanation:

In this question, some of the values are missing, that's why its solution can be defined as follows:

In point a:

Density of air [tex]\rho_{air} =1.29 \frac{kg}{m^3}\\\\[/tex]  

Density of helium [tex]\rho_{helium} =0.178 \frac{kg}{m^3} \\\\[/tex]

The volume of the helium balloon [tex]V= 2L[/tex]

[tex]\to V= 2 \times 10^{-3}[/tex]

Formula:

[tex]F_B = e_a V g\\\\[/tex]

[tex]= 1.29 \times 2 \times 10^{-3} \times 9.81\\\\ = 0.0253098 \ N[/tex]

where g is the acceleration due to gravity

In point b:

[tex]m_g= 1.5 \ g[/tex]

Formula:

[tex]F_{net}=F_B - (m_r + \rho_h \ v )g[/tex]

       [tex]= 0.0253098 - (1.5 \times 10^{-3} + 0.178 \times 2 \times 10^{-3} \times 9.81)\\\\= 7.10244 \times 10^{-3} \ N[/tex]

Answer: I think is C

Explanation:

Answer: more oxygen is needed to produce energy

Answer:

F = -8820 N

Explanation:

Given that,

The weight of a car, W = 19600 N

Initial speed of the car, u = 30 m/s

It is brought to rest, final velocity, v = 0

Distance, d = 100 m

We need to find the average friction force acting on it.

Firstly we find the acceleration of the car using third equation of motion. Let it is a.

[tex]v^2-u^2=2as\\\\a=\dfrac{v^2-u^2}{2d}\\\\a=\dfrac{(0)^2-(30)^2}{2\times 100}\\\\=-4.5\ m/s^2[/tex]

Average frictional force,

F = ma

m is mass, [tex]m=\dfrac{W}{g}=\dfrac{19600\ N}{10\ m/s^2}=1960\ kg[/tex]

F = 1960 kg × -4.5 m/s²

= -8820 N

So, the average friction force acting on it is 8820 N.

Answer: 3.045 km/s

Explanation:

When an object is doing a circular motion, the velocity of the object is written as;

v = r*w

where;

r = radius of the circle

w = angular velocity.

In this case, we know that:

w = 7.25*10^(-5) s^-1

And the radius will be equal to the radius of the Earth, plus the height of the satellite, this is:

R = radius of the Earth + 35600 km = 6400km + 35600 km  = 42000 km

Then the velocity of the satellite will be:

v =  42000 km*7.25*10^(-5) s^-1 = 3.045 km/s

The velocity of a satellite with an orbit 35600 km above the surface of the earth and an angular velocity of 7.25×10–5 rad/sec = 3045 m/s

Velocity: This is the rate of change of displacement.

To solve this problem we need to use the formula for calculating the velocity of  an object in circular motion

The Velocity of the satellite is given as

V = ωr................ Equation 1

where V = velocity of the satellite, ω = angular velocity of the satellite, r = radius of the circle.

Note: r = height of the satellite above the surface of the earth+Radius of the earth

From the question,

Given: ω = 7.25×10⁻⁵ rad/sec, r = 35600+6400 = 42000 km = 4.2×10⁷ m

Substitute these values into equation 1

V = (7.25×10⁻⁵)(4.2×10⁷ )

V = 30.45×10²

V = 3045 m/s

Hence, the velocity of the satellite is 3045 m/s

Learn more about velocity here: https://brainly.com/question/6237128