Help!!! Need answer ASAP.

Help!!! Need Answer ASAP.

Answers

Answer 1

Answer:

Hey

Explanation:


Related Questions

please help! What is the relationship between velocity and acceleration?

Answers

Answer:Acceleration implies any change in the velocity of the object with respect to time. Velocity is nothing but the rate of change of displacement. On the other hand, acceleration is the rate of change of velocity with respect to time.

Explanation:


What is Energy in physics?

Answers

Answer:

Energy, in physics, the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other various forms. There are, moreover, heat and work—i.e., energy in the process of transfer from one body to another.

Explanation:

Hope this helps!

why does sound energy even exist

Answers

So you can hear stuff

A light truck with manual transmission has a circular brake drum with a diameter of d = 310 millimeters. Each brake pad, which presses against the drum, is s = 306 millimeters long. What central angle is subtended by one of the brake pads? Write your answer in both radians and degrees.

Answers

Answer:

113 degrees

1.974 radians

Explanation:

The angle can be calculated using below expression

Angle = arc/r

Where arc= diameter of d = 310 millimeters

r= s = 306 millimeters long.

Since both have the same unit, no need for conversion

Angle = arc/r = 306/(0.5×310 )

= 306/155

= 1.974 radians

Then to find the angle In degrees we have

R x 180/pi = D

Where R= angle in radians= 1.974 radians

1.974 x 180/π

Where π= 22/7

= 113 degrees( approximately)

Therefore, central angle is subtended by one of the brake pads is 1.974 radians

A television of mass 15 kg sits on a table. The coefficient of static friction
between the table and the television is 0.35. What is the minimum applied
force that will cause the television to slide?

A) 38 N
B) 147 N
C) 51 N
D) 79 N

Answers

Answer:

more than 51.45 N

__________________________________________________________

We are given:

Mass of the television = 15 kg

Coefficient of Static friction = 0.35

Minimum force required to move the television:

Normal Force:

We know that the normal force is equal and opposite to the Weight of the television

Weight of the television = Mg            

[where m is the mass and g is the acceleration due to gravity]

Weight = 15 * 9.8

Weight = 147 N

Force of Friction:

We are given the coefficient of Friction = 0.35

We know that coefficient of Friction = Force of friction / Normal Force

replacing the variables

0.35 = Force of Friction / 147

Force of Friction = 147 * 0.35                     [multiplying both sides by 147]

Force of Friction = 51.45 N

Since a force of 51.45 N is will be applied opposite to the direction of application of Force, the television will only move when we apply more force than 51.45 N

Answer:

it is C

Explanation:

When lightning occurs, it produces a sound wave and a light wave at the same exact time. If u are watching a faraway storm, which wave gets to you first?

Answers

Light wave gets to you first
Light travels faster than sound and is around 300000000 m/s which is faster than sound waves. And by experience, when you are looking out the window, you can see a quick flash of light (lightning), light moves very fast

1. An object in motion tends to stay in
motion because it has ___?____. (inertia or
terminal velocity)

Answers

Answer: intertia

Explanation:

If you are pushing 200 kg of textbooks with acceleration of 2m/s2, how much net force are you exerting on the books? (Fnet=ma)
( There is more than one answer)

200N

100N

400Kg

400N

400 kg.m/s2


Answers

Explanation:

m=200kg

a=2m/s2

F=ma

F=200kg×2m/s2

=400kg.m/s2 or 400N

You have a source of energy containing 21 gj of energy at 600k how much this energy can be converted to work when rejecting heat to the atmosphere at 27°C?

Answers

Answer:

Available energy = 35 x 10⁶ J

Explanation:

Given:

Amount of energy (Q) = 21 gj = 21 x 10⁹ J

Temperature T1 = 600 k

Temperature T0 = 27 + 273 = 300k

Find:

Available energy

Computation:

Available energy = Q[1/T0 - 1/T1]

Available energy = 21 x 10⁹ J[1/300 - 1/600]

Available energy = 35 x 10⁶ J

can vectors be strung together?

Answers

Answer:

The head-to-tail method is a graphical way to add vectors, The tail of the vector is the starting point of the vector, and the head (or tip) of a vector is the final, pointed end of the arrow.

Explanation:

An airplane is flying at a speed of 200 m/s in level flight at an altitude of 800 m. A package is to be dropped from the airplane to land on a target on the ground. At what horizontal distance away from the target should the package be released so that it lands on the target

Answers

Answer:

The

Explanation:

The horizontal distance covered is known as the range expressed as;

R = U√2H/g

U is the speed = 200m/s

H is the max height = 800m

g is the gravity = 9.8m/s²

R = 200√2(800)/9.8

R = 200√1600/9.8

R = 200√163.27

R = 200(12.78)

R = 2555.54

Hence the package should be released at a distance of 2555.54m

Use the above picture to fill in the blanks for the following statement.

One of the element carbon combines with one of the element oxygen to form one of the compound carbon dioxide.

Answers

Answer:

C + 2O ------ CO2

Explanation:

"One" element of Carbon combines with "Two" elements of Oxygen, to form "One" compound of Carbon dioxide.

I didn't really get what you meant but this is my guess of what you meant

A sample with a path length of 1 cm absorbs 99.0% of the incident light at a wavelength of 274 nm, measured with respect to an appropriate solvent blank. Tyrosine is known to be the only chromophore present in the sample that has significant absorption at 274 nm. Calculate the molar concentration of tyrosine in the sample.

Answers

Answer:

17. NADH has a molar extinction coefficient of 6200 M2 cm at 340 nm. Calculate the molar concentration of NADH required to obtain an absorbance of 0.1 at 340 nm in a 1-cm path length cuvette. 18. A sample with a path length of 1 cm absorbs 99.0% of the incident light at a wavelength of 274 nm, measured with respect to an appropriate solvent blank. Tyrosine is known to be the only chromophore present in the sample that has significant absorption at 274 nm. Calculate the molar concentration of tyrosine in the sample.

Explanation:

How do we use energy transformation in our daily lives?

Answers

Answer:hat are some examples of energy transformation?

The Sun transforms nuclear energy into heat and light energy.

Our bodies convert chemical energy in our food into mechanical energy for us to move.

An electric fan transforms electrical energy into kinetic energy.

Explanation:

We pick up cups and place them in different places

An electromagnet needs a magnetic metal core. To produce a magnetic field,
what else is required?

A second metal core?
A solenoid with current or no current running through it? Or a permanent magnet?

Answers

A second metal core i think

Answer:solenoid with current running through it

Explanation:just took the test

Which type of mass movement is likely to result in considerable property damage, but rarely causes loss of life? a. debris avalanche b. rock fall c. mudflow d. creep

Answers

Answer:

The correct answer is D. Creep.

Explanation:

Ground creep is a slow downward movement of a hill or mountain slope without the formation of demolition forms. The decisive factor for this is the continuous flow of movement of the soil.

The main driver of collapse is the movement of the surface layer particles during expansion in a direction perpendicular to the slope, followed by vertical collapse on contraction. The visible effect of the collapsing is the inclination of fences and poles, as well as trees that grow out of the ground towards the slope and have trunks curved vertically, in more extreme cases it may be cracks on the walls of buildings.

What frequency is received by a person watching an oncoming ambulance moving at 115 km/h and emitting a steady 753 Hz sound from its siren

Answers

Answer:

77.6 Hz

Explanation:

What frequency is received by a person watching an oncoming ambulance moving at 115 km/h and emitting a steady 753 Hz sound from its siren.

The given parameters are:

Observer speed = 115 km/h

Source frequency = 753 Hz

Speed of sound = 342 m/s

First convert km/h to m/s

Observer speed = (115 × 1000) / 3600

Observer speed = 31.94 m/s

The frequency received by the person will be:

F = fv / ( V - v )

Where

F = frequency received by the person

f = siren frequency

V = speed of sound

v = speed of the ambulance

Substitute all the parameters into the formula

F = (753 × 31.94) / ( 342 - 31.94 )

F = 24050.82 / 310.06

F = 77.568 Hz

Therefore, the frequency received by a person is approximately 77.6Hz

what is the force of gravitational attraction between a 92 kg student and a 550 g slice of pizza that are 25 cm apart

Answers

Answer:

[tex]F = 5.4*10^{-8}\ N[/tex]

Explanation:

Given

Represent the mass of the student with M and the mass of the slice of pizza with m

[tex]M = 92kg[/tex]

[tex]m = 550g[/tex]

[tex]d = 25cm[/tex]

Required

Determine the force of attraction

This is calculated as:

[tex]F = \frac{GMm}{d^2}[/tex]

Where G = gravitational constant

[tex]G = 6.67408 * 10^{-11}\ m^3 kg^{-1} s^{-2}[/tex]

Convert both mass to kilogram and distance to metre

[tex]m = 550g[/tex]

[tex]m = 550kg/1000[/tex]

[tex]m = 0.55kg[/tex]

[tex]d = 25cm[/tex]

[tex]d = 25m/100[/tex]

[tex]d = 0.25m[/tex]

Substitute these values in [tex]F = \frac{GMm}{d^2}[/tex]

[tex]F = \frac{6.67408 * 10^{-11} * 92 * 0.55}{0.25^2}[/tex]

[tex]F = \frac{6.67408 * 92 * 0.55* 10^{-11} }{0.25^2}[/tex]

[tex]F = \frac{337.708448* 10^{-11} }{0.0625}[/tex]

[tex]F = 5403.335168* 10^{-11}[/tex]

[tex]F = 5.403335168* 10^3*10^{-11}[/tex]

[tex]F = 5.403335168*10^{3-11}[/tex]

[tex]F = 5.403335168*10^{-8}[/tex]

[tex]F = 5.4*10^{-8}\ N[/tex]

in the woman's mouth if
she is drinking through a straw extending 0.085 m above the surface of the drink? Note:
Assume the drink has a density of 1015 kg/m^3. ????​

Answers

Answer:

hi mate,

interesting question, first of all the pressure is determined by using the following formula:

Pg = p * G * h  

where p is the density of the liquid, G is the gravity and h is the height difference, in you case you have:

p = 1015 kg/m3

G = 9.8m/s2

h = 0.085 m  

insert these values into the equation above:

Pg = 1015 kg/m3 * 9.8m/s2 * 0.085 m = 849.81 kg·m-1·s-2 or 849.81 pascal

hope it helps, :-)

please mark me as brainliest

A hydraulic car jack needs to be designed so it can lift a 2903.57 lb car assuming that a person can exert a force of 24.41 lbs. If the piston the person is pushing on had a radius of 3.26 cm, what should the diameter of the piston be that is used to raise the car?

Answers

Answer:

Diameter of the piston would be 0.71 m (71.1 cm)

Explanation:

From the principle of pressure;

[tex]\frac{F_{1} }{A_{1} }[/tex] = [tex]\frac{F_{2} }{A_{2} }[/tex]

Let [tex]F_{1}[/tex] = 2903.57 lb, [tex]F_{2}[/tex] = 24.41 lbs, [tex]r_{2}[/tex] = 3.26 cm = 0.0326 m.

[tex]A_{2}[/tex] = [tex]\pi r^{2}[/tex]

    = [tex]\frac{22}{7}[/tex] x [tex](0.0326)^{2}[/tex]

    = 0.00334 [tex]m^{2}[/tex]

So that:

[tex]\frac{2903.57}{A_{1} }[/tex] = [tex]\frac{24.41}{0.00334}[/tex]

[tex]A_{1}[/tex] = [tex]\frac{2903.57*0.00334}{24.41}[/tex]

    = 0.3973

[tex]A_{1}[/tex] = 0.4 [tex]m^{2}[/tex]

The radius of the piston can be determined by:

[tex]A_{1}[/tex] = [tex]\pi r^{2}[/tex]

0.3973 = [tex]\frac{22}{7}[/tex] x [tex]r^{2}[/tex]

[tex]r^{2}[/tex] = [tex]\frac{0.3973*7}{22}[/tex]

   = 0.1264

r = [tex]\sqrt{0.1264}[/tex]

 = 0.3555

r = 0.36 m

Diameter of the piston = 2 x r

                                     = 2 x 0.3555

                                     = 0.711

Diameter of the piston would be 0.71 m (71.1 cm).

an object of mass 4kg moving with initial velocity if 20m/s accelerates for 10s and attaind a final velocity of 60m/s calculate the acceleration​

Answers

Answer:

given us,

mass= 4×9.8gm m(9.8) formula

= 39.2

final velocity (v)= 60m/s

initial velocity (u)= 20m/s

time(t)= 10s

acleration(a)=?

now,

accleration(a)= v-u/t=60- 20/10

=40/10

=4m/s

:. the acceleration is 4 m/s

Explanation:

first we have to calculate mass and we can use acceleration formula

Hypothesis: If the starting height of a sloped racetrack is increased, then the speed at which a toy car travels along the track will ________ because the toy car ____​

Answers

Answer:

If the starting height of a sloped racetrack is increased, then the speed at which a toy car travels along the track will increase because the toy car will have a greater acceleration.

Explanation:

I hope this helped

Hypothesis: If the starting height of a sloped racetrack is increased, then the speed at which a toy car travels along the track will increase because the toy car gains more potential energy at the higher starting point.

When a toy car moves along a sloped racetrack, it converts its potential energy (due to its height above the ground) into kinetic energy (energy of motion). The higher the starting height of the racetrack, the more potential energy the toy car possesses initially.

As the toy car moves down the sloped track, it will accelerate due to the force of gravity. The potential energy is converted into kinetic energy, and the car's speed increases. According to the law of conservation of energy, the total mechanical energy (sum of potential and kinetic energy) remains constant as long as no external forces, such as friction, act on the car.

Therefore, if the starting height of the racetrack is increased, the toy car will have more potential energy to start with. As it moves down the track, it will convert this increased potential energy into kinetic energy, resulting in a higher speed compared to when it starts from a lower height.

To know more about speed here

https://brainly.com/question/17661499

#SPJ2

The time constant for RC circuit with the values of R1 and C1 is 5ms. What will be the time constant for a new RC circuit with the values: R2=10R1 and C2 = 0.5C1.

a. 2.5ms
b. 15.5ms
c. 50ms
d. 25ms
e. 15ms

Answers

Answer:

d. 25 ms

Explanation:

In a RC circuit we call time constant to the product of the resistance times the capacitance, which represents the time when the charge reaches to the 63% of the final value, as follows:

       [tex]\tau_{1} = R_{1} *C_{1} = 5 ms (1)[/tex]

If we have a new circuit with new values for R and C, the time constant will be defined in the same way, as follows:

       [tex]\tau_{2} =10* R_{1} *0.5*C_{1} = 5*(R_{1}* C_{1}) = 5* \tau_{1} = 5* 5 ms = 25 ms (2)[/tex]

A series RCL circuit contains a 65.2-Ω resistor, a 2.26-μF capacitor, and a 2.08-mH inductor. When the frequency is 2400 Hz, what is the power factor of the circuit?

Answers

Answer:

The power factor of the circuit is 0.99

Explanation:

Given;

resistance of the resistor, R = 65.2 ohms

capacitance of the capacitor, C = 2.26 μF = 2.26 x 10⁻⁶ F

inductance, L = 2.08 mH = 2.08 x 10⁻³ H

frequency of the AC, f = 2400 Hz

The angular frequency is given by;

ω = 2πf

ω = 2π(2400) = 15081.6 rad/s

The inductive reactance is given by;

XL = ωL

XL = (15081.6 x 2.08 x 10⁻³)

XL = 31.37 ohms

The capacitive reactance is given by;

[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{(15081.6)(2.26*10^{-6} )}\\\\X_c = 29.34 \ ohms[/tex]

The phase difference is given by;

[tex]tan\phi = \frac{X_l - X_c}{R}\\\\ tan\phi =\frac{31.37-29.34}{65.2} \\\\tan\phi = 0.0311 \\\\\phi = tan^{-1} (0.0311)\\\\\phi = 1.78^0[/tex]

The power factor is given by;

CosФ = Cos(1.78) = 0.99

Therefore, the power factor of the circuit is 0.99

A car starts from rest and accelerates uniformly over a time of 7 seconds for a distance of 190m. Find the the acceleration of the car.

Answers

Answer:

a = 7.75 [m/²]

Explanation:

To solve this problem we must use the following equation of kinematics.

[tex]x=x_{0} +v_{o} *t + (\frac{1}{2})*a*t^{2}[/tex]

where:

x = final distance = 190 [m]

Xo =  initial distance = 0

Vo = initial velocity = 0 (car starts from the rest)

a = acceleration [m/s²]

t = time = 7 [s]

190 = 0 + (0*7) + 0.5*a*(7²)

190 = 0.5*49*a

a = 7.75 [m/²]

what transition metal has 5 more protons than the halogen found in period 3?​

Answers

Answer: Titanium (Ti)

Explanation:

First, each element has a unique atomic number Z, that is equal to the number of protons in the nucleus.

The halogen in period 3 is chlorine (Ch)

Chlorine's atomic number is Z = 17, this means that it has 17 protons.

Now we want to find a transition metal that has 5 more protons, then this transition metal has Z = 17 + 5 = 22

Now we can look at the periodic table and find the element with Z = 22, and if this is in the d-block, then this will be a transition metal.

The element with Z = 22 is titanium (Ti)

In a double-slit experiment, the second-order bright fringe is observed at an angle of 0.61°. If the slit separation is 0.11 mm, then what is the wavelength of the light?

Answers

Answer:

[tex]5.86\times 10^{-7}\ \text{m}[/tex]

Explanation:

d = Slit separation = 0.11 mm

[tex]\theta[/tex] = Angle = [tex]0.61^{\circ}[/tex]

m = Order = 2

[tex]\lambda[/tex] = Wavelength

We have the relation

[tex]d\sin\theta=m\lambda\\\Rightarrow \lambda=\dfrac{d\sin\theta}{m}\\\Rightarrow \lambda=\dfrac{0.11\times 10^{-3}\times \sin0.61^{\circ}}{2}\\\Rightarrow \lambda=5.86\times 10^{-7}\ \text{m}[/tex]

The wavelength of the light is [tex]5.86\times 10^{-7}\ \text{m}[/tex].

The displacement of a transvers wave travelling on a string is represented by D1 = 4.2sin(0.84.x - 47t + 21) where D1 and x are in cm and t in s.Find an equation that represents a wave which, when traveling in the opposite direction, will produce a standing wave when added to this one

Answers

Answer:

The equation for such type of wave is  [tex]D_2 = sin(0.84.x + 47t + 21)[/tex]

Explanation:

From the question we are told that

   The displacement is [tex]D_1 = 4.2sin(0.84.x - 47t + 21)[/tex]

   Here  the wave number is  k=  0.84

              The angular frequency is  [tex]w = 47[/tex]

              The phase shift is  [tex]\phi = 21[/tex]

 Generally the equation that represents a wave which, when traveling in the opposite direction, will produce a standing wave when added to this one is mathematically represented as

             [tex]D_2 = sin(0.84.x + 47t + 21)[/tex]

A 760-kg horse whose power output is 1 hp is pulling a sled over the snow at 3.9 m/s. Find the force the horse exerts on the sled. Round your intermediate step to one decimal place and the final answer to two decimal places.

Answers

Answer:

191 N

Explanation:

Power can be regarded as the amount of energy that is been transfered at a unit time and can be calculated using the Express below

Po = F*V

P= power

F= force

V= velocity

From the question, we were given power output as 1 hp and velocity= 3.9 m/s.

But

1hp= 746 Watts = 746 Joules/s.

Then substitute the values

Po = F*V = 746 J/s

F ×3.9 = 746

F= 746/3.9

F = 191 N.

Therefore, the force the horse exerts on the sled iss 191 N

I’ll give you a star if you answer this question. Which of the following is the best example of work being done
on an object?

Answers

The answer would be C because you are working hard for the object to not move pls mark as brainliest
Other Questions
Who were the first settlers in Winnipeg(Manitoba)Why did they settle there?(please don't get the answer from google!) Please help me :) I need #32 2. 1. Your best friend has missed a lot of school recently. Your teacher has allowed you to create a study guide and will let your friend use it on the test. The guide should include: descriptions of amplitude, wavelength, frequency, and wave speed. Give examples of the wave relationship between amplitude and wavelength (if there is no relationship, explain how you know) Give examples of the wave relationship between wavelength and frequency (if there is no relationship, explain how you know)Text to speech Lae bought grapes for $1.50 per pound. lines A and B are parallel what is the measurement of angle b? guys please help!!!! i NEED to get these right to pass!!!! I WILL GIVE THE BRAINLIEST!!!! what are the steps to solve -8(p+2)+p=4(p+3)+5 How many more cherry pies have 60 to 89 cherries than 90 to 119 cherries? . Part A: Under a dilation of scale factor 3 centered at the origin, AB becomes A'B'. Determine the coordinates of A'B' and sketch A'B' on the graph. 1 Part B: Under a dilation of scale factor - centered at the origin, AB becomes DC. Determine the coordinates of DC and sketch DC on the graph. a small table is 2 feet by 3 feet a large table is twice as long and rwice as wide as the small table. Whats the area of the large in square feet 10. ? Choose the correct answer. A. Jack's best sport is basketball; his brother, excels at football. B. Jack's best sport is basketball his brother excels at football. C. Jack's best sport is basketball, his brother excels at football. D. Jack's best sport is basketball; his brother excels at football. Why did the World Feel the Need to honor Veterans AfterWWI and not after the Thirty Years War? If the x- intercept is 2 and the y- intercept is -5 and the slope is 1/3. Write in equation in slope intercept form and standard form. 7. In what ways has science harmed us? i need help! Which condition of the eye is most likely to be responsible for each of these problems? a: A student who can read the whiteboard from the back of the room but has to strain to read the print in a textbook and gets headaches while reading from a computer screen at home b: A science teacher who has never had eye problems before begins to find it easier to read books and newspapers when they are held further away U A cube is a rectangular prism whose edge lengths are all the same.What is the volume of a cube with an edge length of 2 feet? Circlethe letter of the correct answer.A 4 cubic feetB 6 cubic feetC 8 cubic feetD 12 cubic feetDanny chose B as the correct answer. How did he get that answer? Which term refers to the ability to do work? O energy O power force O motionPlease I have a 50 question Exam Al inicio de un paseo recorrer una distancia de 200 km/h, los primeros 120 km lo har a una velocidad constante de 60 km/h y el resto a una velocidad constante de 90 km/h,Cunto tiempo en horas total durar el viaje? How many moles are in 68 grams of copper (II) hydroxide, Cu(OH)2