hello, please I need the solution of this question asap , thank you in advance
​

Among Acetone, butane, and propanol except for butane, the other two compounds possess polar bonds.  

Polar bonds are when one end of a molecule has a positive charge and the other end has a negative charge. Butane has no polar bonds because its atoms have the same electronegativity.

Acetone has a polar bond because the oxygen atom has a higher electronegativity than the carbon and hydrogen atoms, creating a charge difference between them.              

Propanol has two polar bonds. The oxygen atom has a higher electronegativity than the hydrogen and carbon atoms, creating a charge difference between them.

Additionally, the hydrogen atoms are slightly more electronegative than the carbon atom, creating a second charge difference within the molecule. This charge difference is what makes the polar bonds in propanol.

The image attached explains the polar bonds in each compound

To know more about electronegativity, click below:

https://brainly.com/question/18258838

#SPJ4

Answer:

a) combustion reaction

balanced equation: 2C4H10 + 13O2 → 8CO2 + 10H2O

b) synthesis reaction

balance equation: 6Li + N2 → 2Li3N

c) double replacement

balanced equation: 2AgNO3 + Na2CrO4 → 2NaNO3 + Ag2CrO4

d) decomposition

balanced equation: 2MgO → 2Mg + O2

e) double dispalcement

balanced equation: HI + KOH → KI + H2O

f)  single displacement

2AlPO4 + 3Mg → 2Al + Mg3(PO4)2

Explanation (detailed):

a)

Word Equation: Butane + Dioxygen = Carbon Dioxide + Water

How to balance:

1- Label Each Compound With a Variable

Label each compound (reactant or product) in the equation with a variable representing the unknown coefficients.

aC4H10 + bO2 = cCO2 + dH2O

2- Create a System of Equations

Create an equation for each element (C, H, O) where each term represents the number of atoms of the element in each reactant or product.

C: 4a + 0b = 1c + 0d

H: 10a + 0b = 0c + 2d

O: 0a + 2b = 2c + 1d

3-Solve For All Variables

Use substitution, gauss elimination, or a calculator to solve for each variable.

(keep doing this for every equation)

if you have any questions feel free to ask ill be happy to answer

Answer:

Ca + 2 Na+ + 2 e- ⟶ Ca2+ + 2 Na

Explanation:

The overall reaction is balanced by including the electrons that are transferred in the reaction. The balanced overall reaction is:

Ca + 2 Na+ + 2 e- ⟶ Ca2+ + 2 Na

This reaction shows the transfer of two electrons from calcium to sodium ions, which results in the formation of calcium ions and sodium atoms. This reaction is electrically neutral, with the same number of positive and negative charges on each side of the reaction. Overall, the reaction represents the transfer of electrons from one element to another, resulting in the formation of new chemical species.

When a physical change in a sample occurs, composition of sample does not change.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ1

It is impossible to combine KOH and HI to create a buffer solution.

A buffer solution, also referred to as a pH buffer or hydrogen ion buffer, is an aqueous mixture of a weak acid and its conjugate base, or vice versa. The pH scarcely changes at all when a small amount of a strong acid or basic is added to it. Buffer solutions are used in a wide range of chemical processes to keep pH values almost constant. Buffering is used by many living systems to regulate pH in the natural world. For instance, the bicarbonate buffering system regulates the pH of blood, and bicarbonate also acts as a buffer in the ocean.

The pH of a solution containing a buffering agent can only fluctuate within a specific range, regardless of what else may be in the solution. This is necessary for the enzymes in biological systems to function properly. For instance, the primary mechanism for maintaining the blood's pH between 7.35 and 7.45 is a blend of carbonic acid and bicarbonate found in the plasma component of human blood. Outside of this exact pH range, metabolic diseases called acidosis and alkalosis that finally end in mortality rapidly develop if the necessary buffering capacity is not immediately restored.

To learn more about buffer solutions visit:

https://brainly.com/question/24262133

#SPJ1

True. The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08.

True. In Florida, it is illegal to operate a motor vehicle with a blood alcohol content (BAC) of .08 or higher. This is known as driving under the influence (DUI). The legal limit for DUI in Florida is .08.

If a driver is found to have a BAC of .08 or higher, they can be arrested for DUI. Florida also has a Zero Tolerance Law for drivers under 21, meaning that any BAC .02 or higher can lead to an arrest for DUI.

For more questions like DUI click the link below:

https://brainly.com/question/29771200

#SPJ4

Complete question:

The presumptive definition of Driving Under the Influence in Florida is having a Blood Alcohol Content (BAC) of .08. true or false

The given pairs of compounds are the stereoisomers and in it they are  enantiomers.

A chemical molecule's atoms can be organized in a variety of ways. Isomerism is the name given to this phenomenon. Isomers are molecules with the same chemical formula but distinct atom configurations.

The nomenclature system used to identify enantiomers is called the R-S system. According to the Cahn-Ingold-Prelog priority rule scheme, which assigns a priority to each of the chiral center's substituents, this method labels the chiral center R or S. On the basis of atomic mass, the priority is determined. Stereoisomers make up the given pair of molecules.

The given pair of compounds are the  R and S enantiomers.

To know more about stereoisomers, please refer:

https://brainly.com/question/17366745

#SPJ4

The reaction that treated with KOH in ethanol is explained by the E2 Elimination.

Compound has the molecular formula C9H19Cl and when treated with KOH, ethanol is obtained. haloalkanes that on reaction with a base form an alkene as the major product 2-chloro-2,6-dimethylheptane and 3-bromo-2,6-dimethylheptane respectively. On reaction with base, both the compounds form 2,6-dimethylhept-2-ene as major product via E2-elimination. This major product is decided by Zaitsev's rule. The alkene reacts with one mole H2 to form 2,6-dimethylheptane via addition reaction. Reaction with HCl occurs via Markovnikov addition, chlorine group is added to second carbon and 2-chloro-2,6-dimethylheptane is formed again. Therefore,  2-chloro-2,6-dimethyheptane and  3-bromo-2,6-dimethylheptane.

To learn more about E2 Elimination please visit:

https://brainly.com/question/18510324

#SPJ4

Pull the glove inside out as you peel it away from your body. Peel one glove away from your body and grab it by the wrist on the outside. Avoid touching your exposed skin.

Describe chemicals.

Any material with a known composition is a chemical.

How to take off your gloves:

Grab one glove's palm just above your wrist. Turning the glove inside out, carefully remove it.

Hold the glove in the palm of the hand that is still wearing gloves.

The glove must be pulled off from the inside out.

After taking off your gloves and before handling any surfaces or items, always wash your hands.

To know more about chemicals click on the link below:

https://brainly.com/question/13145357

#SPJ4

There can be release of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, the given nuclear decay reaction is balanced.

It is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

So, according to our questions Uranium-238 is undergoing alpha emission. The balanced reaction can be written as

²³⁸U₉₂ ²³⁴ [tex]\rightarrow[/tex]Th₉₀+⁴₂He

So, From above reaction we can see that the total mass on reactant side is equal to total mass on product side. So, this reaction is balanced.

Therefore, the given nuclear decay reaction is balanced.

To know more about nuclear decay, here:

brainly.com/question/21114779

#SPJ1

Amino acid addition to a growing chain happens at the C terminal and ATP is required.

Proteins are made up of substances called amino acids. Proteins and amino acids are the components of life. Amino acids are the byproducts of the digestion or breakdown of proteins. Amino acids are used by the human body to create proteins that benefit the organism. Two ATP molecules are needed for amino acid activation, two more for peptide bond formation and ribosome translation, as well as an additional ATP molecule or so for error correction and the synthesis of sequences that are lost during protein maturation, in order to add an amino acid to a growing peptide chain.

Want to know more about amino acids visit the link which is given below;

https://brainly.com/question/14583479

#SPJ4

The mass percent formulas is given as :

mass percent = ( mass of the solute / mass of the solution ) × 100 %

The mass is generally represented in the grams. the mass percent percent mean the weight percent or w/w %. the mass formula is given as follows :

mass percent = ( mass of the solute / mass of the solution ) × 100 %

let us take an example if mass of solute = 7 g and the mass of solvent = 367 g.  the mass percent is given as :

mass of solution = 7 + 367 = 374 g

mass percent = ( mass of the solute / mass of the solution ) × 100 %

                      = (7 / 374) × 100 %

                      = 1.86 %

To learn more about mass percent here

https://brainly.com/question/5394922

#SPJ4

The temperature at which the gas could have zero volume is called absolute zero. It is a hypothetical condition where all the curves meet at a point at V= 0 and T becomes -273.15°C.

The plot of the volume of a sample of gas versus temperature at three different pressures is a graphical representation of the ideal gas law.

As the temperature of the gas sample increases, the pressure increases, and the volume of the gas sample increases as well.

However, the rate at which the volume of the gas sample increases is different at the three different pressures. At higher pressures, the volume increases more quickly than at lower pressures, indicating that the gas sample is more compressible at higher pressures.

This can be seen in the plot as the curves for the three different pressures diverge. Additionally, the plot also shows that the volume of the gas sample increases more quickly at higher temperatures.

This is because the kinetic energy of the gas molecules increases with temperature, allowing them to move more freely, thus increasing the volume of the gas sample.

To know more about ideal gas law, click here:

https://brainly.com/question/27870704

#SPJ4

The daughter of the parent isotope, which is the end result of a radioactive decay process, may be unstable in which case it will also degrade. Up till a stable nuclide has been produced, the process goes on.

Nuclear reactions are collisions between two nuclei or between a nucleus and an outside subatomic particle that result in the creation of one or more new nuclides in nuclear physics and nuclear chemistry. Consequently, at least one nuclide must change throughout a nuclear reaction.

Ionizing radiation is released as a result of radioactive decay. Among the ionising radiation that is released are alpha, beta, and/or gamma rays. Unbalanced atoms known as radionuclides are the site of radioactive decay. The release of energy in the form of ionising radiation occurs during radioactive decay. Alpha particles, beta particles, and/or gamma rays are all examples of the ionising radiation that is released.

LEARN MORE ABOUT nuclear reactions HERE

https://brainly.com/question/25387647

#SPJ4

Answer:

7.31 x 10⁵ kJ

Explanation:

To find the energy gained by the iron sample, you need to use the following equation:

Q = mcΔT

In this equation,

-----> Q = energy (J)

-----> m = mass (g)

-----> c = specific heat capacity (J/g°C)

-----> ΔT = T₂ - T₁ = change in temperature (°C)

T₂ represents the final temperature and T₁ represents the initial temperature. After you calculate the value of "Q", you need to convert the energy from joules (J) to kilojoules (kJ).

Q = ? J                                  c = 0.387 J/g°C

m = 24.6 g                         ΔT = 99.8°C - 23.0°C = 76.8°C

Q = mcΔT                                                     <----- Equation

Q = (24.6 g)(0.387 J/g°C)(76.8°)                  <----- Insert values

Q = 731 J                                                       <----- Multiply

1,000 J = 1 kJ

   731 J                  1 kJ
--------------  x  -------------------  =  7.31 x 10⁵ kJ
                          1,000 J

If 6 M HCl is substituted for the 3 M HCl in a procedure, the concentration of the acid will be doubled.

This could have several consequences, depending on the specific procedure. In general, doubling the concentration of the acid will increase the rate of any reaction that involves the acid, so the reaction could proceed more quickly or with greater intensity than it would with the 3 M HCl.

In addition, the increased concentration of HCl could cause the reaction to become more acidic, so other components of the reaction may be affected as well. Finally, the increased concentration of HCl could increase the risk of hazards, such as burns, if proper safety precautions are not taken.

For more questions like HCL click the link below:

https://brainly.com/question/29847167

#SPJ4

according to the big bang during the very earliest moments of the universe the first photons appeared in the universe Were those released during decoupling (visible today as the cosmic microwave background) and 21 cm radio emissions occasionally emitted by hydrogen atoms.

The Big Bang theory is a physiological concept that explains how the universe is expanding from a dense population and heat state. Various Big Bang cosmic models explain the progression of the visible universe from its earliest known time frames to its global context form. During a talk for a March 1949 BBC Radio broadcast, English astronomer Fred Hoyle is credited with coining the term "Big Bang," saying: "Such theories were predicated on the hypothesis that all of the material in the universe was created inside one big bang at a special time in the distant past."

Learn more about  Big Bang theory here:

https://brainly.com/question/17209127

#SPJ4

22.704 grams of CO2 are produced by burning 7.49 g of C4H10

This can be calculated as :

The basic reaction is: C4H10 + O2 = CO2 + H2O

We have 4 carbons for each reactant molecule, and this reacts with oxygen to form carbon dioxide and water.  We, therefore, need to show 4 CO2 molecules to consume these 4 carbons.

Next, let's balance the H atoms.  The 10 H atoms from the C4H10 must find a home in the water molecules.  5 water molecules can be made from 10 hydrogen atoms.

The only atom left is oxygen.  So far, the product side contains 13 O atoms (8 from the CO2 and 5 from the H2O).  Awkward, since oxygen only comes in pairs, an even number.  Let's use a fraction, 6.5, for the O2 for now, just to get it balanced:

This equation is balanced, but not legal since we can't have 1/2 of an O2 molecule.  So simply multiply all coefficients by 2:

The equation is now properly balanced.  It is telling us that we'll get 8 moles of CO2 for every 2 moles of C4H10.  That's a molar ratio of 4CO2/1 C4H8.

Let's find the moles of C4H8.  Divide the grams of C4H8 by its molar mass (58.04g/mole).

Now multiply moles C4H8 by the molar ratio we calculated above:

Convert to grams CO2 by multiplying by CO2's molar mass:

To learn more about the properties of butane:

https://brainly.com/question/14704834

The total pressure after equilibrium will be 0.854 atm calculated  help of kp.Since the Kp depends on the individual partial pressures of the components in mixture.

N₂O₄ ==> 2NO₂

initial..0.554.........0

change....-p..........+2p

equil....0.554-p.......2p

Total Pressure at equilibrium  = 0.770;

therefore,

0.554-p+2p = 0.770 and this allows  to calculate Kp.

NO₂ is injected to make  the Ptotal equals to 0.906 bar

so that makes 0.906-0.770 = 0.136 bar  being injected.

It would make a new ICE chart with the NO₂ start = 0.136 + old equilibrium pressure of  N₂O₄ = old equilibrium and recalculate the new pressures using the Kp from the first part. You know of course that the reaction will be shifted to  left side

To know more about equilibrium  pressure, please refer;

https://brainly.com/question/25651917

#SPJ4

Giant stars' hydrogen reserves are almost depleted. High-mass stars are defined as having a mass of at least 8 times that of the Sun. These stars are of type O and B, and as we already observed, they only exist for a brief period of time on the Main Sequence, on the order of 10 million years.

Nevertheless, they go through very similar life phases to the low mass stars. Remember that these phases for low mass stars are: hydrogen burning in the core during the Main Sequence; when the hydrogen in the core is spent; the star starts hydrogen burning in a shell around the degenerate helium core; and the star moves up the Red Giant Branch.Extreme pressure increases the temperature to 100 million degrees, where helium burning is feasible, when the hydrogen fuel runs out. As the helium in the core is exhausted, the star starts burning helium in a shell around an inert carbon core while moving back up the H-R diagram to become a Red Supergiant. Suddenly, at the helium flash, the degenerate core starts burning helium and the star moves toward (but not quite to) the Main Sequence again.

To know more about hydrogen please click on the link brainly.com/question/11837837

#SPJ4

Mass of the pure silver deposited on a metal object made into the cathode of the cell is calculated to be 0.0217 gm.

The process of using electrodeposition to coat an object in a layer of metal is called electroplating .

As we know that, Q = I * t

=0.270 * 72

= 19.44 C

Here Q is quantity of electricity , I is current in amperes = 0.270 A (given)

t is time in seconds (72.0 sec)

As 96500 Coulomb of electricity electrolyzes 1 mole of Ag

then,19.44 C of electricity deposits,

=1/96500 * 19.44

= 0.000201 moles of Ag

Mass of Ag is = number of moles * molar mass

= 0.000201 * 108

= 0.0217 gm

Thus, mass of pure silver deposited on a metal object made into the cathode of the cell is  0.0217 gm.

To know more about electroplating, refer

https://brainly.com/question/16266707

#SPJ4

Krebs cycle is a visual organizer that shows the components, locations, and sites for each of the main phases of cellular respiration.

The second crucial stage of oxidative phosphorylation is the Krebs Cycle, often known as the citric acid cycle. The Krebs cycle converts the energy from the smaller, 3-carbon glucose molecules produced by glycolysis into electron carriers, which are then utilised in the electron transport chain to create ATP. The majority of living things utilize glucose as their main fuel source, but they first have to break it down and store the energy in ATP and other molecules. The mitochondria contain the Krebs cycle. The Krebs cycle's processes contribute electrons and protons to a variety of electron carriers inside the mitochondrial matrix.

To know more about  molecules please click on the link brainly.com/question/28238455

#SPJ4

Draw the organic by product(s) of the subsequent reactions, taking stereochemistry into account as necessary. The formula for H2 lindlar catalyst is:

Lindlar catalyst for CH3-C-CH2-CH2-CH3 + H2 - CH2 - CH2 - CH2 - CH3

| |

H H

The bond is hydrogenated into double bonds using the lindlar catalyst. Alkynes that include triple bonds are converted into alkenes that contain double bonds using the H2 + lindlar catalyst. Alkenes do not react with the H2 + lindlar catalyst. The following is a description of the H2 + lindlar catalyst reaction:

Using the Lindlar catalyst, the reaction goes from CH3-C to C-CH2-CH2- CH3 and then to CH3-C=C-CH2-CH2- CH3 and then to hexyne.

                                      H H  

(2) Hexene

To know more about H2 lindlar visit:-

https://brainly.com/question/14464125

#SPJ4

The linear combination of 2p1 and 2p2 functions can be used to generate the hydrogenic 2px and 2py orbitals.

Orbitals are regions of space that describe the probable location of an electron around an atom's nucleus. They are usually shown as a cloud-like region and are divided into sub-regions called s, p, d, and f orbitals. Each orbital has a specific energy level and a specific shape. The orbitals determine the properties of the atom and its chemical behavior. Electrons in different orbitals interact in different ways, and this determines the type of bonds that form between atoms.

This is done by adding and subtracting the two functions and then normalizing the resultant wave functions. This gives the following expressions:

2px = (1/√2)(2p1 + 2p2)

2py = (1/√2)(2p1 - 2p2)

The hydrogenic 2pz orbital is simply equal to the 2p0 function, since the z-axis is the axis of highest symmetry.

Thus, 2pz = 2p0.

To know more about orbitals click-

https://brainly.com/question/20319149

#SPJ4

Starting with solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene. Maleic anhydride, a dienophile, reacts with the diene to produce 4-cyclohexene-cis-dicarboxylic anhydride.

A cyclic organic compound with a sulfone functional group is known as sulfolene or butadiene sulfone. It is a crystalline, odorless, white solid that can be stored forever and dissolves in various organic solvents as well as water. The substance is utilized as a butadiene source.

Sulfolane is a common industrial solvent that is used for cleaning natural gas and extracting aromatic hydrocarbons from hydrocarbon mixtures.

Sulfolane, a dipolar aprotic sulfone solvent, is comparable in physicochemical qualities to other dipolar aprotic solvents as DMSO, NMP, DMF, and DMAC. Sulfolane (anhydrous) has the highest freezing point and highest boiling point among the solvents in Table 1 at 28.4 °C.

Thus, solid 3-sulfolene and then breaking it down was simpler than doing it with gaseous 1,3-butadiene.

To learn more about sulfolene, follow the link;

https://brainly.com/question/29854277

#SPJ1

The total concentration of ions remaining in the solution is 0.0007 M.

To solve this problem, we need to determine the concentration of both magnesium nitrate and sodium hydroxide before the solutions are mixed, and then use the reaction between magnesium nitrate and sodium hydroxide to determine the concentration of ions remaining in solution after the reaction is complete.

To calculate the total concentration of ions remaining in solution after the reaction is complete, we need to first determine the number of moles of each reactant present before the reaction occurs. To do this, we can use the molar mass of each compound to convert the mass of each compound to moles.

First, we can calculate the number of moles of magnesium nitrate present in the 22.02 mL solution:

Number of moles of magnesium nitrate = (1.615 g magnesium nitrate) / (148.32 g/mol magnesium nitrate) = 0.0109 moles magnesium nitrate

Next, we can calculate the number of moles of sodium hydroxide present in the 28.64 mL solution:

Number of moles of sodium hydroxide = (1.073 g sodium hydroxide) / (40.00 g/mol sodium hydroxide) = 0.0268 moles sodium hydroxide

Now that we know the number of moles of each reactant, we can use the balanced chemical equation for the reaction between magnesium nitrate and sodium hydroxide to determine the number of moles of each product that will be formed:

Magnesium nitrate + Sodium hydroxide -> Magnesium hydroxide + Sodium nitrate

1 mole magnesium nitrate + 1 mole sodium hydroxide -> 1 mole magnesium hydroxide + 1 mole sodium nitrate

Since we have 0.0109 moles of magnesium nitrate and 0.0268 moles of sodium hydroxide, the number of moles of each product that will be formed is also 0.0109 moles for magnesium hydroxide and 0.0268 moles for sodium nitrate.

Finally, we can use the number of moles of each product and the total volume of the solution to calculate the concentration of each product in the solution. The total volume of the solution is 22.02 mL + 28.64 mL = 50.66 mL.

The concentration of magnesium hydroxide in the solution is:

(0.0109 moles magnesium hydroxide) / (50.66 mL solution) = 0.0002 M magnesium hydroxide

The concentration of sodium nitrate in the solution is:

(0.0268 moles sodium nitrate) / (50.66 mL solution) = 0.0005 M sodium nitrate

The total concentration of ions remaining in the solution after the reaction is complete is the sum of the concentration of the magnesium ions and the concentration of the sodium ions. The concentration of the magnesium ions is 0.0002 M, and the concentration of the sodium ions is 0.0005 M, so the total concentration of ions remaining in the solution is 0.0002 M + 0.0005 M = 0.0007 M.

Learn more about solution, here https://brainly.com/question/7932885

#SPJ4

Answer:

manganese dioxide, is a solid chemical compound that is typically not able to conduct electricity when it is in its solid form. This is because the structure of solid manganese dioxide is made up of a network of strong covalent bonds between the manganese and oxygen atoms. These covalent bonds are very stable and do not allow electrons to flow freely through the compound, which is necessary for the conduction of electricity.

However, when manganese dioxide is melted or dissolved in a solvent, the covalent bonds are broken and the electrons become more mobile. This allows the electrons to flow more freely through the compound, enabling it to conduct electricity.

In summary, manganese (IV) oxide is not able to conduct electricity in its solid form due to the strong covalent bonds between its atoms, which do not allow electrons to flow freely. However, when it is in its molten or solution form, the covalent bonds are broken and the electrons become more mobile, allowing the compound to conduct electricity.

At room temperature, granulated sugar is a white, crystalline solid that is soluble in water, has a low melting and boiling point, and is bound together by covalent bonds.

What types of solids have crystal lattices?

Crystalline solids are made up of atoms, polymers, or ions that are arranged in a predictable, three-dimensional pattern. Solids that have a crystal structure include quartz, diamonds, sodium chloride, and others.

What are the characteristics of a crystalline solid?

Solids with crystalline structures have conventional geometries. In these kinds of solids, atoms, molecules, or ions are arranged in long-range order throughout the 3-dimensional network of a crystal. Sodium chloride, quartz, diamond, etc. are few examples. Crystalline solids' characteristics.

To know more about crystalline solid visit:

https://brainly.com/question/28274778

#SPJ4

The balanced net ionic equation for the formation of the precipitate is Ag⁺(aq) + cl⁻ --> Agcl(s)

Given ,   Nacl(aq) + AgNO₃(aq )  --> ?

since,

   Nacl(aq) + cl⁻(aq) + Ag⁺(aq) + NO₃⁻(aq) --> Na⁺(aq)+NO₃⁻(aq)+ Agcl(s)

Net ionic equation is , Ag⁺(aq) + cl⁻ --> Agcl(s) .

Ionic equations are chemical equations in which electrolytes in aqueous solution are described as dissociated ions.

Example: 1) Sodium chloride(aq) + Silver nitrate(aq) → Silver chloride(s) + Sodium nitrate(aq) >>Ag+(aq) + Cl-(aq) → AgCl(s) 2) Sodium(s) + Hydrochloric acid (aq) -> sodium chloride (aq) + hydrogen (g)

Learn more about  ionic equation here : https://brainly.com/question/13879496

#SPJ4

An electron in a molecule behaves wave-like according to a function called a molecular orbital. Utilizing quantum mechanics, the molecular orbital theory defines the electrical structure of molecules.

What would an example of equilibrium look like?

There are several examples of equilibrium, such as: an open book that is lying flat. a moving object that is moving steadily a chemical reaction takes place where the rates of both the forward and reverse reactions are identical.

What is straightforward equilibrium?

A system is at an equilibrium when all of its external forces are in balance. When a system is in equilibrium, nothing changes.

To know more about equilibrium visit:

https://brainly.com/question/9813711

#SPJ4