he potential energy between two atoms in a particular molecule has the form U(s) = 2.6/x^8 - 4.3/x^4 where the units of x are length and the numbers 2.G and 4.3 have appropriate units so that U(x) has units of energy. What b the equilibrium separation of the atoms (that is the distance at which the force between the atoms is zero)?

Answer:

Explanation:

Well they told you the exact formula to use. Work is the force multiplied by  the distance through which its applied.

W = (20N)(35m)

= 700 Joules

13.) Power is the amount of work done over the time through which the work is being done.

P = W/t

= 10J/2s

= 5J/s

Answer:

The work done by the force on the particle is 29.85 J.

Explanation:

The work is given by:  

[tex] W = ^{x_{2}}_{x_{1}}\int F_{x} dx [/tex]

Where:

x₁: is the lower limit = 0 m    

x₂: is the upper limit = 1.9 m

Fₓ: is the force in the horizontal direction =  (4.5 + 13.7x - 1.5x²)N

[tex]W = ^{1.9}_{0}\int (4.5 + 13.7x - 1.5x^{2}) dx[/tex]  

[tex] W = 4.5x|^{1.9}_{0} + \frac{13.7}{2}x^{2}|^{1.9}_{0} - \frac{1.5}{3}x^{3}|^{1.9}_{0} [/tex]  

[tex] W = 4.5N(1.9 m) + \frac{13.7N}{2}(1.9 m)^{2} - \frac{1.5N}{3}(1.9 m)^{3} [/tex]    

[tex] W = 4.5N(1.9 m) + \frac{13.7N}{2}(1.9 m)^{2} - \frac{1.5N}{3}(1.9 m)^{3} [/tex]      

[tex]W = 29.85 J[/tex]

Therefore, the work done by the force on the particle is 29.85 J.

I hope it helps you!                                

Answer:planning

Explanation:

The person is in the stage of planning due to its action of planning to be active.

The person is in the planning stage among the five stages of change for physical activity because the person just started planning to be active not yet started the activity. If a person is in the state of looking thoughtfully at something for a very long time then it is said to be Contemplation.

While on the other hand, if a person is in a stage in which there is no intention to change behavior in the foreseeable future then it is called precontemplation so we can conclude that the person is in the stage of planning due to its action of planning to be active.

Learn more about physical activity here: https://brainly.com/question/1561572

Answer:

Explanation:

The lift is going down with acceleration

Initial speed u = 0

Final speed v = 6 m/s

distance s = 15.25 m

acceleration a = ?

v² = u² + 2 a s

6² = 0 + 2 x a x 15.25

a = 1.18 m /s²

Elevator is going down with acceleration  .

mg - T = ma where T is tension in the cable .

722 x 9.8 - T = 722 x 1.18

7075.6 - T = 851.96

T = 6223.64 N .

Answer:

Explanation:

equation of wave is given by the following equation

y = (2.6 cm) sin[1.8 - (5.8 s-1)t].

Comparing it with standard form of wave

y = A sin ( ωt - kx )

we get

ω = 5.8

2πn = 5.8

n = .92 per second

kx = 1.8

k x 6 = 1.8

k = 0.3

[tex]\frac{2\pi}{\lambda}[/tex] = 0.3

λ = 20.9 cm

Answer:

104.59 m

Explanation:

From the question given above, the following data were obtained:

Horizontal velocity (u) = 13 m/s

Horizontal distance (s) = 60 m

Height of cliff =?

Next, we shall determine the time taken for the car to hit the ground. This can be obtained as follow:

Horizontal velocity (u) = 13 m/s

Horizontal distance (s) = 60 m

Time (t) =?

s = ut

60 = 13 × t

Divide both side by 13

t = 60 /13

t = 4.62 s

Finally, we shall determine the height of the cliff. This can be obtained as follow:

Time (t) = 4.62 s

Acceleration due to gravity (g) = 9.8 m/s²

Height (h) =?

h = ½gt²

h = ½ × 9.8 × 4.62²

h = 4.9 × 21.3444

h = 104.59 m

The, the height of the cliff is 104.59 m

Answer:

-32.5 * 10^-5 J

Explanation:

The potential energy of this system of charges is;

Ue = kq1q2/r

Where;

k is the Coulumb's constant

q1 and q2 are the magnitudes of the charges

r is the distance of separation between the charges

Substituting values;

Ue = 9.0×10^9 N⋅m2/C2 * 5.5 x 10^-8 C *( -2.3 x10^-8) C/(3.5 * 10^-2)

Ue= -32.5 * 10^-5 J

The potential energy of this two particle system relative to the potential energy at infinite separation is [tex]\bold {-32.5x 10^-^5\ J}[/tex].

The potential energy of this system of charges,  

[tex]\bold {Ue = k\dfrac{q1q2}{r}}[/tex]

Where;  

k - Coulumb's constant  

q1 and q2 - magnitudes of the charges  

r - distance between the charges

Put the values in the equation,

[tex]\bold {Ue = 9.0x10^9\times \dfrac {5.5 x 10^{-8} C \times -2.3 x10^{-8} C}{3.5 \times 10^{-2}}}\\\\\bold {Ue= -32.5 x 10^-^5\ J}[/tex]

Therefore, the the potential energy of this two particle system relative to the potential energy at infinite separation is [tex]\bold {-32.5x 10^-^5\ J}[/tex].

To know more about charges,

https://brainly.com/question/13248422

Answer:

B

Explanation:

Answer:

(a) the unknown inertia is 0.388 kg

(b) the average acceleration of the heavier cart is 317 m/s²

(c) the average acceleration of the lighter cart is 539 m/s²

Explanation:

Given;

mass of the first cart, m₁ = 0.66 kg

initial speed of the first cart, u₁ = 1.85 m/s

let the mass of the cart with unknown inertia be m₂

initial velocity of the second cart, u₂ = 2.17 m/s to the left

velocity of the first cart after collision, v₁ = 1.32 m/s to the left

velocity of the second cart after collision, v₂ = 3.22 m/s

time of collision, t = 0.010 s

(a) What is the unknown inertia?

Apply the principle of conservation of linear momentum, to determine the unknown inertia.

let leftward direction be negative direction

let rightward direction be positive direction

m₁u₁ + m₂u₂ = m₁v₁  + m₂v₂

0.66(1.85) + m₂(-2.17) = 0.66(-1.32) + m₂(3.22)

1.221 - 2.17m₂ = -0.8712 + 3.22m₂

1.221 + 0.8712 = 3.22m₂ + 2.17m₂

2.0922 = 5.39m₂

m₂ = 2.0922 / 5.39

m₂ = 0.388 kg

The unknown inertia is 0.388 kg

(b) the average acceleration of the heavier cart

the heavier cart has a mass of 0.66 kg

[tex]a = \frac{v_1 - u_1}{t} \\\\a = \frac{-1.32 - 1.85}{0.01} \\\\a = -317 \ m/s^2\\\\|a| = 317 \ m/s^2[/tex]

(c) the average acceleration of the lighter cart;

the lighter cart has a mass of 0.388 kg

[tex]a = \frac{v_2 - u_2}{t} \\\\a = \frac{3.22 - (-2.17)}{0.01} \\\\a =\frac{3.22 \ +\ 2.17}{0.01} \\\\a= 539\ m/s^2[/tex]

Answer:

Personal attitudes play a role in conflict resolution and include prejudices, biases, prior experience, and the level of importance of a topic to the parties involved. It is important to note that you can control your own attitude, but you cannot control the attitudes of others; it is necessary to focus on your attitudes and assumptions before you address the other party's. Next, you need to know what the nature of the conflict is, or what the conflict is about. It is necessary to know how severe the conflict is, how easily it can be resolved, how much sacrifice it will take to overcome, and how heated it is likely to get. Lastly, one needs to understand the capabilities of the people involved. Is everyone on the same level and do they have what they need to work on the conflict, i.e. money, time, and support?

Explanation:

Answer:

The guy above is correct I'm just trying to make the post more reliable if two people say it then it's good plus I checked also Thanks other guy.

Explanation:

Answer:

22.5 m

Explanation:

Using v² = u² - 2gy where u = initial velocity of BB = 21 m/s, v = final velocity of BB = 1 m/s (since this is the required speed of BB in which it will not harm the birds), g = acceleration due to gravity = 9.8 m/s² and y = minimum height of BB above the gun at which the birds may safely fly.

Substituting the values of the variables into the equation, we have

v² = u² - 2gy

(1 m/s)² = (21 m/s)² - 2(9.8 m/s²)y

collecting like terms, we have

(1 m/s)² - (21 m/s)² = - 2(9.8 m/s²)y

1 m²/s² - 441 m²/s² = -(19.6 m/s²)y

simplifying, we have

- 440 m²/s² = -(19.6 m/s²)y

dividing through by -19.6 m/s², we have

y = - 440 m²/s² ÷ -19.6 m/s²

y = 22.45 m

y ≅ 22.5 m

Answer:

a) Time period is 3.3 seconds

b) The frequency is 0.3030 Hz

c) amplitude is 0.25 m

d) maximum speed is 0.476 m/s

Explanation:

Given the data in the question;

a) Period

Time Period T = Time taken for one oscillation

T = 33s / 10 = 3.3 seconds

Therefore, Time period is 3.3 seconds

b) Frequency

we know that frequency is the inverse of time period

so;

Frequency f = 1/T = 1 / 3.3 s

Frequency f = 0.3030 Hz

Therefore, The frequency is 0.3030 Hz

c) amplitude

amplitude A = [tex]\frac{1}{2}[/tex]( 60 cm - 10 cm )

A = [tex]\frac{1}{2}[/tex] × 50 cm

A = 25 cm

A = 0.25 m

Therefore, amplitude is 0.25 m

d) maximum speed of the glider

maximum speed [tex]V_{max}[/tex] = ωA

and ω = 2π/T

so maximum speed [tex]V_{max}[/tex] = [tex]\frac{2\pi }{T}[/tex]A

so we substitute

so maximum speed [tex]V_{max}[/tex] = [tex]\frac{2\pi }{3.3}[/tex] × 0.25 m

so maximum speed [tex]V_{max}[/tex] = 0.476 m/s

Therefore, maximum speed is 0.476 m/s

The time period is 3.3 s, frequency is 0.303 Hz, amplitude is 0.25 m, and maximum speed is 0.47575 m/s.

Based on the given information,

• The air-track glider connected with a spring oscillates between the 10 cm mark and the 60 cm mark.  

• In 33 seconds, the glider completes 10 oscillations.  

There is a need to find, the period, frequency, amplitude, and maximum speed of the glider.

a) Time period (T) for one oscillation is,

[tex]\frac{33s}{10} = 3.3 s[/tex]

b) The frequency (f) is the reciprocal of the time period,

[tex]f = \frac{1}{T} =\frac{1}{3.3S} = 0.303 Hz[/tex]

c) The amplitude (A) is,

[tex]A = \frac{1}{2} (60 cm-10cm) = 25cm[/tex]

[tex]A = 0.25 m[/tex]

d) Maximum speed of the glider is,

[tex]Vmax = \frac{2\pi }{T} (0.25 m)[/tex]

[tex]Vmax = 0.47575 m/s[/tex]

Thus,  time period is 3.3 s, frequency is 0.303 Hz, amplitude is 0.25 m, and maximum speed is 0.47575 m/s.

To know more about:

https://brainly.com/question/14118020

Answer:

it will option option A hope it helps

Answer:

75 rad/s

Explanation:

The angular acceleration is the time rate of change of angular velocity. It is given by the formula:

α(t) = d/dt[ω(t)]

Hence: ω(t) = ∫a(t) dt

Also, angular velocity is the time rate of change of displacement. It is given by:

ω(t) = d/dt[θ(t)]

θ(t) = ∫w(t) dt

θ(t) = ∫∫α(t) dtdt

Given that: α (t) = (6.0 rad/s4)t² = 6t² rad/s⁴. Hence:

θ(t) = ∫∫α(t) dtdt

θ(t) = ∫∫6t² dtdt =∫[∫6t² dt]dt

θ(t) = ∫[2t³]dt = t⁴/2 rad

θ(t) = t⁴/2 rad

At θ(t) = 10 rev = (10 *  2π) rad = 20π rad, we can find t:

20π = t⁴/2

40π = t⁴

t = ⁴√40π

t = 3.348 s

ω(t) = ∫α(t) dt = ∫6t² dt = 2t³

ω(t) = 2t³

ω(3.348) = 2(3.348)³ = 75 rad/s

The required value of angular velocity of wheel is 75 rad/s.

Given data:

The angular acceleration of the wheel is, [tex]\alpha (t) = 6.0 t^{2} \;\rm rad/s^{4}[/tex].

The turning rate of wheel is, n = 10 rev.

The angular acceleration is the time rate of change of angular velocity. It is given by the formula:

α(t) = d/dt[ω(t)

Clearly, the angular velocity is the single integral of angular acceleration.  Then,

ω(t) = ∫a(t) dt

Also, angular velocity is the time rate of change of displacement. It is given by:

ω(t) = d/dt[θ(t)]

θ(t) = ∫w(t) dt

θ(t) = ∫∫α(t) dt dt

Since,

α (t) = (6.0 rad/s4)t² = 6t² rad/s⁴.

Then solve by substituting the values as,

θ(t) = ∫∫α(t) dt dt

θ(t) = ∫∫6t² dt dt

θ(t) =∫[∫6t² dt]dt  

θ(t) = ∫[2t³]dt = t⁴/2 rad

θ(t) = t⁴/2 rad

At θ(t) = 10 rev = (10 *  2π) rad = 20π rad, we can find t:

20π = t⁴/2

40π = t⁴

t = ⁴√40π

t = 3.348 s

Also,  

ω(t) = ∫α(t) dt = ∫6t² dt = 2t³

ω(t) = 2t³ ......................................................(1)

Substitute the value of time in equation (1) as,

ω( t = 3.348) = 2(3.348)³ = 75 rad/s

Thus, we can conclude that the required value of angular velocity of wheel is 75 rad/s.

Learn more about the angular velocity here:

https://brainly.com/question/17592191

Answer:

mining

Explanation:

because they use the most heavy duty machines

Answer:

B. The rod must be an insulator

Explanation:

We have that this rod must be an insulator. After this child rubbed the balloon, the balloon acquired static charge. So holding a rid against it is going to cause it to repel, this is to say it is repelling because the rod also is carrying some static charges. If this rid was a conductor, there would be no charge in its surface. The charge would have passed through her hand as it comes in contact.

I'm pretty sure I the third option C.

Explanation:

sorry if I'm wrong

Answer:

cos 0 = 1.

Fs = 7×8 = 56 J

Explanation:

Answer:

The velocity of the steel pellet relative to the ground when it leaves the sling shot is approximately 5.960 meters per second.

Explanation:

Let suppose that RC car-slingshot-steelpellet is a conservative system, that is, that non-conservative forces (i.e. friction, air viscosity) can be neglected. The velocity of the steel pellet can be found by means of the Principle of Energy Conservation and under the consideration that change in gravitational potential energy is negligible and that the RC car travels at constant velocity:

[tex]\frac{1}{2}\cdot (m_{C}+m_{P})\cdot v_{o}^{2} + \frac{1}{2}\cdot k\cdot x^{2} = \frac{1}{2}\cdot m_{C}\cdot v_{o}^{2} + \frac{1}{2}\cdot m_{P}\cdot v^{2}[/tex]

[tex]\frac{1}{2}\cdot m_{P}\cdot v_{o}^{2} + \frac{1}{2}\cdot k\cdot x^{2} = \frac{1}{2}\cdot m_{P}\cdot v^{2}[/tex]

[tex]m_{P}\cdot v_{o}^{2} + k\cdot x^{2} = m_{P}\cdot v^{2}[/tex]

[tex]v^{2} = v_{o}^{2} + \frac{k}{m_{P}}\cdot x^{2}[/tex]

[tex]v = \sqrt{v_{o}^{2}+\frac{k}{m_{P}}\cdot x^{2} }[/tex] (1)

Where:

[tex]v_{o}[/tex] - Initial velocity of the steel pellet, measured in meters per second.

[tex]v[/tex] - Final velocity of the steel pellet, measured in meters per second.

[tex]k[/tex] - Spring constant, measured in newtons per meter.

[tex]m_{P}[/tex] - Mass of the steel pellet, measured in kilograms.

[tex]m_{C}[/tex] - Mass of the RC car, measured in kilograms.

[tex]x[/tex] - Initial deformation of the spring, measured in meters.

If we know that [tex]v_{o} = 5.6\,\frac{m}{s}[/tex], [tex]k = 85\,\frac{N}{m}[/tex], [tex]m_{P} = 0.025\,kg[/tex] and [tex]x = 0.035\,m[/tex], then the velocity of the steel pellet relative to the ground when it leaves the sling shot is:

[tex]v = \sqrt{\left(5.6\,\frac{m}{s} \right)^{2}+\frac{\left(85\,\frac{N}{m} \right)\cdot (0.035\,m)^{2}}{0.025\,kg} }[/tex]

[tex]v \approx 5.960\,\frac{m}{s}[/tex]

The velocity of the steel pellet relative to the ground when it leaves the sling shot is approximately 5.960 meters per second.

Answer:

0.12 mm ; 140.50 rad/m ; 628.32 rad/sec ; +

Explanation:

Given the wave equation of the form :

y(x, t) = ym sin(kx ± ωt)

Mas per unit length (u) = 5 g/cm = (5÷1000)kg / 0.01m) = 0.005kg/0.01m = 0.5kg/m

Tension, T = 10 N

Amplitude, A = 0.12 mm

Frequency, F = 100 Hz

Comparing with the general wave equation :

y = Asin(kx ± ωt)

A = amplitude = ym = 0.12 mm

2.) k = 2π / λ

Recall :

v = fλ

v = sqrt(T/u) = sqrt(10/0.5) = sqrt(20) = 4.472

λ = v/ f = 4.472 / 100 = 0.04472

Hence,

k = (2 * π) / 0.04472

k = 140.50 rad/m

3.) Angular frequency, ω

ω = 2πf = 2 * 3.14 * 100 = 628.32 rad/sec

4.) sign is +ve

Direction of wave propagation as given is in the negative x axis

Answer:

7.5Watts

Explanation:

Given parameters:

Force of lift  = 25N

Height  = 3.6m

Time  = 12s

Unknown:

Power output  = ?

Solution:

Power is the rate at which work is done ;

     Power  = [tex]\frac{force x height }{time}[/tex]  

   Power  = [tex]\frac{25 x 3.6}{12}[/tex]    = 7.5Watts

Answer:

v = 8.1 m/s

θ = -36.4º (36.4º South of East).

Explanation:

        [tex]p_{ox} = p_{fx} (1)[/tex]

         ⇒ [tex]m_{tr} * v_{tr}= (m_{olds} + m_{tr}) * v_{fx} (2)[/tex]

       [tex]v_{fx} = \frac{m_{tr}*v_{tr} }{(m_{tr} + m_{olds)} } = \frac{4146kg*9.7m/s}{2028kg+4146 kg} = 6.5 m/s (3)[/tex]

        [tex]p_{oy} = p_{fy} (4)[/tex]

        ⇒[tex]m_{olds} * v_{olds}= (m_{olds} + m_{tr}) * v_{fy} (5)[/tex]

       [tex]v_{fy} = \frac{m_{olds}*v_{olds} }{(m_{tr} + m_{olds)} } = \frac{2028kg*(-14.5)m/s}{2028kg+4146 kg} = -4.8 m/s (6)[/tex]

       [tex]v_{f} = \sqrt{v_{fx} ^{2} +v_{fy} ^{2} }} = \sqrt{(6.5m/s)^{2} +(-4.8m/s)^{2}} = 8.1 m/s (7)[/tex]

       [tex]\frac{v_{fy} }{v_{fx} } = tg \theta (8)[/tex]

      ⇒ tg θ = vfy/vfx = (-4.8m/s) / (6.5m/s) = -0.738 (9)

      ⇒ θ = tg⁻¹ (-0.738) = -36.4º

Answer:

a)

Mass flow rate of core =  [tex]m_{e}[/tex] = 60.94 Kg/s

Mass flow rate of fan =  [tex]m_{s}[/tex]  = 73.12 kg/s

TSFC = 3.301 x [tex]10^{-5}[/tex]

b)

Exit Area of Fan = [tex]A_{e}[/tex] = 0.3624 [tex]m^{2}[/tex]

Exit Area of Core = [tex]A_{s}[/tex] = 0.2635 [tex]m^{2}[/tex]

Explanation:

Data Given:

Height = 25000 ft

Vehicle velocity = [tex]u_{a}[/tex] = 815 ft/s = 248.41 m/s

[tex]m_{s} = 1.2m_{e}[/tex]

[tex]m_{f}[/tex] = 0.0255[tex]m_{e}[/tex]  

Where,

[tex]m_{s}[/tex] = Mass flow rate of fan

[tex]m_{e}[/tex] = Mass flow rate of core

F = Thrust

Density of core = [tex]D_{e}[/tex] = 0.000578 slugs/[tex]ft^{3}[/tex] = 0.2979 kg/[tex]m^{3}[/tex]

Density of fan = [tex]D_{s}[/tex] = 0.00154 slugs/[tex]ft^{2}[/tex] = 0.7937 kg/[tex]m^{3}[/tex]

Ambient Pressure of Fan = [tex]P_{s}[/tex] = 10.07 Psi = 69430.21 Pa

Ambient Pressure of core = [tex]P_{e}[/tex] = 10.26 Psi = 70740.2 Pa

Thrust = F = 10580 lbf = 47062.2 N

Velocity of fan = [tex]u_{s}[/tex] = 1147 ft/s = 349.6 m/s

Velocity of core = [tex]u_{e}[/tex] = 1852 ft/s = 564.5 m/s

At the height of 25000 ft, P = 37600 [tex]P_{a}[/tex]

Now,

we have:

[tex]m_{e}[/tex] = [tex]u_{e}[/tex] x  [tex]D_{e}[/tex]  x [tex]A_{e}[/tex]

Plugging in the values, we get:

[tex]m_{e}[/tex]  = 168.16 [tex]A_{e}[/tex]   Equation 1

And,

[tex]m_{s}[/tex]  = [tex]D_{s}[/tex]  x [tex]A_{s}[/tex] x  [tex]u_{s}[/tex]

[tex]m_{s}[/tex]  = 277.5 [tex]A_{s}[/tex]  Equation 2

As, we know,

[tex]m_{s} = 1.2m_{e}[/tex]  

[tex]m_{s}[/tex]  = 277.5 [tex]A_{s}[/tex]

And now for Thrust, we have:

F = [tex]A_{e}[/tex] x ([tex]P_{e}[/tex]  - [tex]P_{a}[/tex] ) + [tex]A_{s}[/tex] x ([tex]P_{s}[/tex] - [tex]P_{a}[/tex] ) + [tex]m_{e}[/tex]x ([tex]u_{e}[/tex]  - [tex]u_{a}[/tex] ) + [tex]m_{s}[/tex] x ([tex]u_{s}[/tex]  -  [tex]u_{a}[/tex] ) Equation 3

Now, substitute equation 1 and 2 in equation 3, we get:

Exit Area of Fan = [tex]A_{e}[/tex] = 0.3624 [tex]m^{2}[/tex]

Exit Area of Core = [tex]A_{s}[/tex] = 0.2635 [tex]m^{2}[/tex]

Mass flow rate of core =  [tex]m_{e}[/tex] = 60.94 Kg/s

Mass flow rate of fan =  [tex]m_{s}[/tex]  = 73.12 kg/s

TSFC = Thrust Specific Fuel Consumption = fuel mass flow rate  / Thrust

TSFC = [tex]m_{f}[/tex]/F

And,

[tex]m_{f}[/tex] = 0.0255[tex]m_{e}[/tex]  

[tex]m_{e}[/tex]   =  60.94

[tex]m_{f}[/tex]  = 0.0255 x 60.94

[tex]m_{f}[/tex]  = 1.55397

TSFC = [tex]m_{f}[/tex]/F

TSFC = 1.55397/47062.2

TSFC = 3.301 x [tex]10^{-5}[/tex]

Low TSFC = High efficiency

High TSFC = Low efficiency

a)

Mass flow rate of core =  [tex]m_{e}[/tex] = 60.94 Kg/s

Mass flow rate of fan =  [tex]m_{s}[/tex]  = 73.12 kg/s

TSFC = 3.301 x [tex]10^{-5}[/tex]

b)

Exit Area of Fan = [tex]A_{e}[/tex] = 0.3624 [tex]m^{2}[/tex]

Exit Area of Core = [tex]A_{s}[/tex] = 0.2635 [tex]m^{2}[/tex]

Answer:

the rate at which the speaker produces energy is 510.51 J/s

Explanation:

Given;

sound intensity of the speaker, I = 6.5 W/m²

distance, r = 2.5 m

The rate at which the speaker produces energy on a spherical surface is given as;

P = IA

P = I(4πr²)

P = 6.5 (W/m²) x 4π x (2.5 m)²

P = 510.51 J/s

Therefore, the rate at which the speaker produces energy is 510.51 J/s

Answer:

A. Retina

Explanation:

Solution :

Given : Mass of ladder = 10 kg

Length of ladder = 5 m

Weight of window cleaner = 75 kg

a). Now equate the torque about the lowermost point of the ladder is given by :

[tex]$=10 \times 9.8 \times \frac{2.5}{2} + 75 \times 9.8 \times \frac{3}{5} \times 2.5 = N \times \sqrt{5^2 - 2.5^2}$[/tex]

Here, N = normal force that the glass exerts on the ladder

Therefore, [tex]$N = 282.9 \ N$[/tex]

                      = 280 N (in 2  significant figures)

b). Equate the forces along horizontal direction,

The horizontal component of the friction, [tex]$F_x = N = 282.9 \ N $[/tex]

The vertical component of the friction, [tex]$F_y = (10+75) \times 9.8$[/tex]

                                                                     = 833 N

Therefore, the net frictional force, [tex]$F = \sqrt{F_x^2+F_y^2}$[/tex]

[tex]$F = \sqrt{(282.9)^2+(833)^2}$[/tex]

    = 879.7 N

    = 880 N (in 2 significant figures)  

c). The angle the forces makes [tex]$= \tan \frac{833}{282.9} $[/tex]

                                                    [tex]$= 71.2 ^\circ $[/tex]

  Therefore in 2 significant figures = [tex]$71 ^\circ$[/tex]

Answer:

40m/s

Explanation:

v²=u²+2as

v²=0²+2(16)(50)

v²=160v=40m/s

Answer:

It means when you look into the lens your vision magnifies by x1

Explanation: