Half Time At 3:00 the hour hand and the minute hand of a clock point in directions that are 90.0
apart. What is the first time after 3:00 that the angle between the two hands has decreased by half to 45.0?

Answers

Answer 1

The first time after 3:00 that the angle between the two hands has decreased by half to 45.0 is 3:08:11.

Angular velocity of the hour hand

The angular velocity of the hour hand for 12 hours time is calculated as follows;

[tex]\omega_h = \frac{2\pi}{12(3600 \ s)}[/tex]

Angular velocity of the minute hand

The angular velocity of the minute hand for 12 hours time is calculated as follows;

[tex]\omega _m = \frac{2\pi}{3600}[/tex]

Difference in the angular velocity

[tex]\Delta \omega = \frac{2\pi }{3600} - \frac{2\pi }{12(3600)} = \frac{11(2\pi)}{12(3600)} = \frac{22\pi}{12 (3600)}[/tex]

First angle between the two hands in radians

[tex]45^0 = \frac{45}{180} \pi= \frac{\pi}{4}[/tex]

Time after 3:00

The time after 3:00 is calculated as follows;

[tex]t =( \frac{\pi}{4}) /\frac{22\pi}{12(3600)} \\\\t = \frac{\pi }{4} \times \frac{12(3600)}{22\pi} \\\\t = 490.91 \ s\\\\t = 8 \min, \ 10.91 \ s[/tex]

[tex]t \approx 8\min, 11 \ s[/tex]

Thus, the first time after 3:00 that the angle between the two hands has decreased by half to 45.0 is 3:08:11.

Learn more time in angular difference here: https://brainly.com/question/7815


Related Questions

A standard 1kilogram weight is a cylinder 50.5mm in height and 52.0mm in diameter. What is the density of the meterial?(kg/m^3)

Answers

Answer:

The correct answer is - 93.24×10^4 kg/m^3.

Explanation:

Given:

height of cylinder: 50.5 mm

diameter = 52.0

then radius will be diameter/2 = 52/2 = 26

Formula:

Density = mass/ volume

Volume = πr^2h

solution:

Now the volume of a cylinder is v = (22/7)×r^2×h

= 22/7×26×26×50.5

= 107261.59 mm^3  

Now volume in cubic meter V =10.7261 ×10^(-5) m^3

So density d = m/V = 1/(10.7261 ×10^(-5))

Or d = 93.24×10^4 kg/m^3

Two solenoids of equal length are each made of 2000 turns of copper wire per meter. Solenoid I has a 5.00 cm radius; solenoid II a 10.0 cm radius. When equal currents are present in the two solenoids, the ratio of the magnitude of the magnetic field BIalong the axis of solenoid I to the magnitude of the magnetic field BIIalong the axis of solenoid II, BI/BII, is

Answers

Answer:

BI/BII = 1

Explanation:

The magnetic field due to a solenoid is given by the following formula:

[tex]B = \mu nI\\[/tex]

where,

B = Magnetic Field due to solenoid

μ = permeability of free space

n = No. of turns per unit length

I = current passing through the solenoid

Now for the first solenoid:

[tex]B_1 = \mu n_1I_1 \\[/tex]

For the second solenoid:

[tex]B_2 = \mu n_2I_2\\[/tex]

Dividing both equations:

[tex]\frac{B_1}{B_2} = \frac{\mu n_1I_1}{\mu n_2I_2}\\[/tex]

here, no. of turns and the current passing through each solenoid is same:

n₁ = n₂ and I₁ = I₂

Therefore,

[tex]\frac{B_1}{B_2} = \frac{\mu nI}{\mu nI}\\[/tex]

BI/BII = 1

What is characteristic of a good insulator?
A. Electrons are usually not moving at all.
B. Electrons are free to move around.
C. Electrons are semi-free to move around.
D. Electrons are tightly bound to the nuclei.

Answers

Answer:

D. Electrons are tightly bound to the nuclei.

Explanation:

In an insulator, the electrons of the outer most shell are bound with a very high electrostatic forces coming from the nucleus of each atom so electrons cannot flow around all atoms making up the material as in a conductor.

The characteristic of a good insulator is Electrons are tightly bound to the nuclei. (option d)

In a good insulator, electrons are tightly bound to the nuclei of their atoms. This means that they are not free to move around within the material, unlike conductors where electrons are relatively loosely bound and can move freely. Due to this strong binding, electrons in insulating materials cannot carry an electric charge or energy easily from one atom to another.

When an electric field is applied to an insulator, the electrons may experience a small displacement within their respective atoms, but they generally do not move from one atom to another or flow through the material like they would in a conductor. As a result, insulators prevent the flow of electric current and are used to isolate or protect conductive elements from accidental contact.

So, the correct answer is D. Electrons are tightly bound to the nuclei.

To know more about insulator here

https://brainly.com/question/2619275

#SPJ6

What is the height of a copper cylinder ( ρCu = 8.96 gcm-3) of diameter 10 cm with a mass of 10 kg ?

Answers

Answer:

h=0.142m=14.2cm

Explanation:

ρ=8.96 g/cm3=8960 kg/m3

d=0.1m

ρ=m/V - - >ρ=m/[π*((d/2)^2) *h] - - >

8960=10/[π*((0.1)^2) *h] - - >

h=0.142m

Frequency more than 20,000 HZ​

Answers

Answer:

dvhd

Explanation:

xhxjjdvcbxhjddvifidid

Answer:

The units of frequency are called hertz (Hz). Humans with normal hearing can hear sounds between 20 Hz and 20,000 Hz. Frequencies above 20,000 Hz are known as ultrasound

a disk of a radius 50 cm rotates at a constant rate of 100 rpm. what distance in meters will a point on the outside rim travel during 30 seconds of rotation?​

Answers

Distance travelled in one round will be equal to the circumference of the disc i.e [tex] 2 \pi r[/tex]

Radius=50cm

Circumference= [tex] 2 \times \frac{22}{7} \times 50cm=> \frac{2200}{7} cm[/tex]

If the disc rotates at speed of 100rpm that means it completes 100 rotation in a minute(60 second)

So, in 30 seconds it will complete 50 rotation.

1 rotation = [tex] \frac{2200}{7} cm [/tex]

[tex] 50 rotation=\frac{2200}{7} \times 50cm \\\\ \frac{110000}{7} cm[/tex]

Break it in decimal.

Your answer will be 15714.2 cm

Which one of the following
statements about electric
current is correct?
- Current is calculated as the amount of charge that pass
a point on a circuit per time.
- Current is calculated as the amount of resistance a
charge encounters in a given time.
- Current is calculated as the amount of energy a charge
loses per unit of time.
- Current is calculated as the distance that a charge
moves per unit of time

Answers

Answer:

Current is calculated as the amount of charge that pass  a point on a circuit per time.

Explanation:

Electric current is defined as the amount of charge that passes a point on a circuit per unit time. The mathematical definition of electric current is given by :

[tex]I=\dfrac{q}{t}[/tex]

Where

q is a charge (Coulomb)

t is time (in seconds)

The SI unit of electric current is A. It is equivalent to C/s. So, the correct option is (A).

A 3kg horizontal disk of radius 0.2m rotates about its center with an angular velocity of 50rad/s. The edge of the horizontal disk is placed in contact with a wall, and the disk comes to rest after 10s. Which of the following situations associated with linear impulse is analogous to the angular impulse that is described?

a. A 3kg block is initially at rest. An applied force of 3N is applied to the block, but the block does not move.
b. A 3kg block is initially at rest. A net force of 3N is applied to the block until it has a speed of 10m/s.
c. A 3kg block is initially traveling at 10m/s. An applied force of 3N is applied to the block in the direction of its velocity vector for 10s.
d. A 3kg block is initially traveling at 10m/s. The block encounters a 3N frictional force until the block eventually stops.

Answers

Answer:

D

Explanation:

From the information given:

The angular speed for the block [tex]\omega = 50 \ rad/s[/tex]

Disk radius (r) = 0.2 m

The block Initial velocity is:

[tex]v = r \omega \\ \\ v = (0.2 \times 50) \\ \\ v= 10 \ m/s[/tex]

Change in the block's angular speed is:

[tex]\Delta _{\omega} = \omega - 0 \\ \\ = 50 \ rad/s[/tex]

However, on the disk, moment of inertIa is:

[tex]I= mr^2 \\ \\ I = (3 \times 0.2^2) \\ \\ I = 0.12 \ kgm^2[/tex]

The time t = 10s

Frictional torques by the wall on the disk is:

[tex]T = I \times (\dfrac{\Delta_{\omega}}{t}) \\ \\ = 0.12 \times (\dfrac{50}{10}) \\ \\ =0.6 \ N.m[/tex]

Finally, the frictional force is calculated as:

[tex]F = \dfrac{T}r{}[/tex]

[tex]F= \dfrac{0.6}{0.2} \\ \\ F = 3N[/tex]

Astronomers define the __________ as all of space and everything in it. It is enormous, almost beyond imagination. Question 2 options: galaxy none of these universe solar system

Answers

Answer:

Universe

Explanation:

I took the quiz.

What is the difference between a positively and negatively charged object?

Answers

Answer:

Positively charged objects have electrons; they simply possess more protons than electrons. Negatively charged objects have protons; it's just their number of electrons is greater than their number of protons.

The difference between a positively charged object and a negatively charged object is the number of protons and electrons. The imbalance in charge results into formation of charged objects.

What are Charged objects?

Charged objects have an imbalance of charge that is either more negative electrons than the positive protons or more positive protons than the negative electrons in the object. The neutral objects are those species which have a balance of charge with equal number of protons and electrons.

A positively charged object is formed when an atom has more protons than electrons. And, a negatively charged object is formed when an atom has more electrons than protons. As, electrons have a negative charge and protons have a positive charge.

Learn more about Charged objects here:

https://brainly.com/question/535279

#SPJ6

7) If someone behaves against your company's code of ethics, what should you do?
A) Ignore it and mind your own business.
B) Suggest that they talk to the human resources department.
C) Talk to them about the situation.
D) Report the problem to your supervisor

Answers

Answer:

D) Report the problem to your supervisor.

Explanation:

This is probably the most efficient way get them to stop or to get them to follow the rules <3

D. Because you should report it on how the person is acting

A 1.1-kg object is suspended from a vertical spring whose spring constant is 120 N/m. (a) Find the amount by which the spring is stretched from its unstrained length. (b) The object is pulled straight down by an additional distance of 0.20 m and released from rest. Find the speed with which the object passes through its original position on the way up.

Answers

Answer:

e = 0.0898m

v = 2.07m/s

Explanation:

a) According to Hooke's law

F = ke

e is the extension

k is the spring constant

Since F = mg

mg = ke

e = mg/k

Substitute the given value

e = 1.1(9.8)/120

e = 10.78/120

e = 0.0898m

Hence it is stretched by 0.0898m from its unstrained length

2) Total Energy = PE+KE+Elastic potential

Total Energy = mgh +1/2mv²+1/2ke²

Substitute the given value

5.0= 1.1(9.8)(0.2)+1/2(1.1)v²+1/2(120)(0.0898)²

Solve for v

5.0 = 2.156+0.55v²+0.48338

5.0-2.156-0.48338= 0.55v²

2.36 =0.55v²

v² = 2.36/0.55

v² = 4.29

v ,= √4.29

v = 2.07m/s

Hence the required velocity is 9.28m/s

What do meteorologists call the lines
that join places with the same
temperature?
A. isobars
B. isotherms
C. anisobars
D. anisotherms

Answers

The answer is B.isotherms

Which one of the statements below is true about mechanical waves?

They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.

Answers

Answer:

D) Mechanical waves require a medium for transmission (wire, air, etc.) as opposed to electromagnetic which travel through empty space - light, radio, etc.)

A torque of 36.5 N · m is applied to an initially motionless wheel which rotates around a fixed axis. This torque is the result of a directed force combined with a friction force. As a result of the applied torque the angular speed of the wheel increases from 0 to 10.3 rad/s. After 6.10 s the directed force is removed, and the wheel comes to rest 60.6 s later.
(a) What is the wheel's moment of inertia (in kg m2)? kg m
(b) What is the magnitude of the torque caused by friction (in N m)? N m
(c) From the time the directed force is initially applied, how many revolutions does the wheel go through?
______ revolutions

Answers

Answer:

[tex]21.6\ \text{kg m}^2[/tex]

[tex]3.672\ \text{Nm}[/tex]

[tex]54.66\ \text{revolutions}[/tex]

Explanation:

[tex]\tau[/tex] = Torque = 36.5 Nm

[tex]\omega_i[/tex] = Initial angular velocity = 0

[tex]\omega_f[/tex] = Final angular velocity = 10.3 rad/s

t = Time = 6.1 s

I = Moment of inertia

From the kinematic equations of linear motion we have

[tex]\omega_f=\omega_i+\alpha_1 t\\\Rightarrow \alpha_1=\dfrac{\omega_f-\omega_i}{t}\\\Rightarrow \alpha_1=\dfrac{10.3-0}{6.1}\\\Rightarrow \alpha_1=1.69\ \text{rad/s}^2[/tex]

Torque is given by

[tex]\tau=I\alpha_1\\\Rightarrow I=\dfrac{\tau}{\alpha_1}\\\Rightarrow I=\dfrac{36.5}{1.69}\\\Rightarrow I=21.6\ \text{kg m}^2[/tex]

The wheel's moment of inertia is [tex]21.6\ \text{kg m}^2[/tex]

t = 60.6 s

[tex]\omega_i[/tex] = 10.3 rad/s

[tex]\omega_f[/tex] = 0

[tex]\alpha_2=\dfrac{0-10.3}{60.6}\\\Rightarrow \alpha_1=-0.17\ \text{rad/s}^2[/tex]

Frictional torque is given by

[tex]\tau_f=I\alpha_2\\\Rightarrow \tau_f=21.6\times -0.17\\\Rightarrow \tau=-3.672\ \text{Nm}[/tex]

The magnitude of the torque caused by friction is [tex]3.672\ \text{Nm}[/tex]

Speeding up

[tex]\theta_1=0\times t+\dfrac{1}{2}\times 1.69\times 6.1^2\\\Rightarrow \theta_1=31.44\ \text{rad}[/tex]

Slowing down

[tex]\theta_2=10.3\times 60.6+\dfrac{1}{2}\times (-0.17)\times 60.6^2\\\Rightarrow \theta_2=312.03\ \text{rad}[/tex]

Total number of revolutions

[tex]\theta=\theta_1+\theta_2\\\Rightarrow \theta=31.44+312.03=343.47\ \text{rad}[/tex]

[tex]\dfrac{343.47}{2\pi}=54.66\ \text{revolutions}[/tex]

The total number of revolutions the wheel goes through is [tex]54.66\ \text{revolutions}[/tex].

An aircraft has to fly between two cities, one of which is 600.0 km north of the other. The pilot starts from the southern city and encounters a steady 100.0 km/h wind that blows from the northeast. The plane has a cruising speed of 236.0 km/h in still air. In what direction (relative to east) must the pilot head her plane

Answers

Answer:

72.57° North of east

Explanation:

From the given information:

We can compute the velocity plane that is related to the ground in air in the North direction as;

[tex]v^{\to} _{PG} = v \\ \\ v^{\to} _{PG,x} = 0 \\ \\ v^{\to} _{PG,y} = v[/tex]

However, the velocity of the wind-related to the ground from the NorthEast  direction is;

[tex]v^{\to}_{wG}=100 \ km/h \\ \\ \text{from North East} \\ \\ v_{wG,x} = (-100 \ km/h ) cos 45 = -70.7 km/h \\ \\ v_{wG,y} = (-100 \ km/h ) sin 45 = -70.7 km/h[/tex]

Now,

Since the plane is moving with a 236 km/h speed in the Northeast direction;

Then;

[tex]v^{\to} _{pw} = 236 \ km/h \\ \\ v^{\to} _{pw.x} = (236 m/s) cos \theta \\ \\ v^{\to} _{pw,y} = (236\ m/s) sin \theta \\ \\ v_{pG,x} = v_{pw,x} + v_{w G,x} \\ \\ \implies 0 = (236 \ km/h) sin \theta -( 70.7 \ km/h) \\ \\ \implies cos \theta = \dfrac{70.7 \ km/h}{236 \ km/h} \\ \\ \theta = cos^{-1} (0.2996) \\ \\ \mathbf{\theta = 72.57}[/tex]

Determiner l'interfrange i sur le plan d'observation π distant de L de D:
Determine the interfringe i on the observation plane π distant from L from D:
1) pour D=f
if D=f
2)pour D=2f
if D=2f

Answers

Answer:

can you explain in Hindi language

because i learn hindi

A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 3.00 s for the boat to travel from its highest point to its lowest, a total distance of 0.700 m . The fisherman sees that the wave crests are spaced a horizontal distance of 5.50 m apart.

Required:
a. How fast are the waves traveling?
b. What is the amplitude of each wave?
c. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, how fast are the waves traveling ?
d. If the total vertical distance traveled by the boat were 0.500 , but the other data remained the same, what is the amplitude of each wave?

Answers

Answer:

a)   v = 0.9167 m / s,  b)  A = 0.350 m,  c)  v = 0.9167 m / s, d)  A = 0.250 m

Explanation:

a) to find the velocity of the wave let us use the relation

          v = λ f

the wavelength is the length that is needed for a complete wave, in this case x = 5.50 m corresponds to a wavelength

           λ = x

           λ = x

the period is the time for the wave to repeat itself, in this case t = 3.00 s corresponds to half a period

          T / 2 = t

           T = 2t

period and frequency are related

           f = 1 / T

           f = 1 / 2t

we substitute

           v = x / 2t

           v = 5.50 / 2 3

           v = 0.9167 m / s

b) the amplitude is the distance from a maximum to zero

          2A = y

           A = y / 2

           A = 0.700 / 2

           A = 0.350 m

c) The horizontal speed of the traveling wave (waves) is independent of the vertical oscillation of the particles, therefore the speed is the same

      v = 0.9167 m / s

d) the amplitude is

           A = 0.500 / 2

           A = 0.250 m

PROJECT: VIRTUAL LABS — CIRCUITS

Answers

Stop with that link need to stop

Answer:

Table A

Measuring Current as a Function of Voltage with a 20 Ω Resistor

Voltage

(V)

Current: Calculated

(A)

Current: Experimental

(A)

1 0.05 0.05

5 0.25 0.25

10 0.50 0.50

20 1.00 1.00

50 2.50 2.50

Table B

Measuring Current as a Function of Resistance at 25 V

Resistance

(Ω)

Current: Calculated

(A)

Current: Experimental

(A)

10 2.50 2.50

20 1.25 1.25

100 0.25 0.25

200 0.12 0.12

Table C

Measuring Current in a Parallel Circuit

Resistor Set

(Ω)

Total  

Resistance

(Ω)

Calculated

Current

(A)

Observed  

Current

(A)

Observed Current  

through Each Resistor

(A)

20, 20, 20 6.67 3.75 3.74 1.25, 1.25, 1.25

20, 20, 200 9.52 2.63 2.62 1.25, 1.25, 0.12

Voltage needed to raise current to 3.75 A (20, 20, 200 resistor set):

Calculated: 35.7

Observed: 36

Table D

Calculating Power of Circuit ComponentsTeacher Guide (continued)

Observed Total Current

(A)

Current through Each Bulb

(A)

Power Usage per Bulb

(W)

2.00 0.67 6.7

Explanation:

got this from the teachers guide

PLEASE HELP and actually help plz
The position of masses 4kg, 6kg, 7kg, 10kg ,and 3kg are (0,1), (4,2), (3,5), (5,6), and (-2,4) respectively. Where must you place a mass of 13kg if you want the center of mass to be at (-1,-3)?​

Answers

Answer:

iEvaluate  for \(x=2.\)Evaluate  for \(x=2.\)Evaluate  for \(x=2.\)Evaluate  for \(x=2.\)Evaluate  for \(x=2.\)Evaluate  for \(x=2.\)Evaluate  for \(x=2.\)

Explanation:

1. Although mercury is a metal, it is a liquid at room temperature. Mercury melts at about -39°C. If
the temperature of a block of mercury starts at -54°C and increases by 22°C, does the mercury melt?
Explain your answer.

Answers

Answer:

I think so because if it starts at a low temperature for that material, it should melt when you bring it up to that temperature.

Answer: Mercury

Explanation: Mercury is kinda like the opposite of regular semi-liquid. For ice to melt you need Fahrenheit to melt ice into water while you need Celsius to melt mercury.

Why must you bend forward when carrying a
heavy load on your back?
1. The gravitational force has decreased.
2. Angular momentum has decreased.
3. The center of gravity has shifted.
4. Inertia has changed.

Answers

Answer:

hi I thinks its number 3

Explanation:

hope you have a nice day

Does latitude has an effect on weight? PLEASE HELP!​

Answers

Answer:

yes

it does you weigh less on the equator than at the North or South Pole, but the difference is small. Note that your body itself does not change. Rather it is the force of gravity and other forces that change as you approach the poles. These forces change right back when you return to your original latitude.

Yes................

A simple generator is used to generate a peak output voltage of 23.0 V . The square armature consists of windings that are 5.1 cm on a side and rotates in a field of 0.500 T at a rate of 55.0 rev/s .
How many loops of wire should be wound on the square armature?

Answers

Answer: 51

Explanation:

Given

Output is 23 V

The square armature side is [tex]a=5.1\ cm[/tex]

Magnetic field [tex]B=0.5\T[/tex]

Rate of revolution [tex]n=55\ rev/s[/tex]

Angular speed

[tex]\omega =2\pi n\\\omega=2\pi \times 55=110\pi\ rad/s[/tex]

Peak voltage is given by

[tex]E_{peak}=NB\omega A\quad [\text{N=Number of windings; A=area of cross-section}]\\\\N=\dfrac{E_{peak}}{B\omega A}\\\\N=\dfrac{23}{0.5\times 110\pi\times (0.051)^2}\approx 51[/tex]

So, there are approximate 51 loops

I WILL REPORT YOU IF YOU DON'T ANSWER QUESTION OR IF YOU PUT A LINK
Which of the following statements are true

Answers

i’ll help you if you help with my question

Which one of the following statements is not true of free falling object

Answers

Answer:

FORCE as for my answer....

Question 8: Unspooling Thread (100 points) A 110 g spool of thread with a 4.2 cm radius is held up by a peg through its center and allowed to freely rotate. Assume the thread is ideal (i.e., it does not stretch or slip, and its mass is negligibly small). A 160 g needle is tied to the loose end of the thread. The needle is dropped, and it accelerates to the floor as the thread unwinds. Find the tension in the thread and the magnitude of the acceleration of the needle as it falls.

Answers

Answer:

   a = 7.29 m / s²,      T = 0.40 N

Explanation:

To solve this exercise we must apply Newton's second law to each body

The needle

              W -T = m a

              mg - T = ma

The spool, which we will approach by a cylinder

             Σ τ = I α

             T R = I α

the moment of inertia of a cylinder with an axis through its center is

             I = ½ M R²

angular and linear variables are related

            a = α R

            α = a / R

we substitute

           T R = (½ M R²) a / R

            T = ½ M a

we write our system of equations together

              mg - T = m a

                      T = ½ M a

we solve

              m g = (m + ½ M) a

              a = [tex]\frac{m}{m + \frac{1}{2} M} \ g[/tex]

let's calculate

              a = [tex]\frac{0.160}{0.160 + \frac{1}{2} 0.110} \ 9.8[/tex]

              a = 7.29 m / s²

now we can look for the tension

              T = ½ M a

              T = ½ 0.110 7.29

               T = 0.40 N

Scroll over the answer choices to see the images. Choose all of the true statements concerning the corresponding image
The picture depicts an electric motor which turns electrical energy into mechanical energy.
The picture depicts a generator which turns electrical energy into mechanical energy
A series circuit is a good example of an electromagnet
F more wite is wound around this iron mail, the strength of the electromagnetic is increased
This image devices that the direction of the magnetic field does not depend on the direction of the current
Flow of electron |

Answers

Answer:

Explanation:

I jus did it on usatestprep

A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of A very long straight current-carrying wire produces a magnetic field of 20 mT at a distance d from the wire. To measure a field of 5 mT due to this wire, you would have to go to a distance from the wire of:_____.
a. 4d.
b. 16d.
c. 2d.
d. 8d.

Answers

Answer:

A. 4d

Explanation:

Let's begin with the formula for the magnetic field produced by a long wire.

[tex]B = \frac{\mu_0I}{2\pi d}[/tex]

So [tex]d=\frac{\mu_0 I}{2\pi B }[/tex]

at point d_{1} is

[tex]d_{1}=\frac{\mu_{0} i}{2 \pi B_{1}} \\ \frac{d_{1}}{d}=\frac{\frac{\mu_{0} i}{2 \pi B_{1}}}{\frac{\mu_{0} i}{2 \pi B}} \\ d_{2}=d\left(\frac{B}{B}\right) \\ =d\left(\frac{20 \mathrm{mT}}{5 \mathrm{mT}}\right) \\ =4 d[/tex]

Hence, option  (A) is correct answer

What does a step-up transformer do?
A. It steps up the energy.
B. It steps up the power.
C. It steps up the voltage.
D. It steps up the current.

Answers

C.it steps up the voltage
Other Questions
What kingdoms are Protist's NOT part of? A trapezoid has a height of 6 inches, an area of 120 inches, and one base measuring 14 inches. Find the length of the other base What is the resistance of a coil which draws a current of 200na Please help!! Explanation and answer please (: HALP MEEEEEEEEEEEEEEPlease number them or add the question. No LINKS Natalie invests $5,632 in a retirement account with a fixed annual interest rate of 2% compounded 12 times per year. What will the account balance be after 16 years?A) $8,398.46C) $7,753.92B) $8,610.85D) $7,910.43 How to write an argumentative essay.... Help me If you know the whole sheet that would be best!!!!! What does Nick find unusual about Jay Gatsby? Why does he admire Gatsby? Cite and explain ?from The Great Gatsby Add a semicolon or colon. The Biblical reference in the rabbi's talk was Joshua 14 1-5. Help me Ill mark brainliest!!!!!!! EXERCISE 1 IMAGINE YOU ARE A CHILD AT SCHOOL .WRITE A DIARY ENTRY IN ABOUT 150-200 WORDS ABOUT YOUR EMOTIONS THE DAY BEFORE YOUR SCHOOL TAKES YOU TO A THEME PARK TANIA WANTS TO BUY STICKERS OVER THE INTERNET. EACH STICKER COSTS $2 AND SHIPPING THE ENTIRE ORDER COSTS $6. IF SHE CAN SPEND NO MORE THAN $30, HOW MANY STICKERS CAN SHE BUY? WRITE AND SOLVE AN INEQUALITY SHOWING THIS SITUATION. CHECK THE IN THE Soultion in the inequality. When calculating simple probability,what goes in the numerator and whatgoes in the denominator?Please. How many times bigger is 3,136 than 972 in percentage form Please someone help me... I have my state test tomorrow and I don't know how to do this. Is the following relation a function? (yes/no) (1,3) (2,2) (3,1) (2,0) (1,-1) and explain why or why not *lf a strand has 35% adenine, what percent will be cytosine? Solve the triangle round al answers to 1 decimalb = 6, A = 20; - I just need Help finding a and c What is the length of the unknown leg in the right triangle?