Depreciation expense for the first year is $2,640, for the second year is $972, and the total for the first and second years is $3,612.
- Depreciable capital at year 0: $4,800
- Depreciation rates: 0.55 for year 1 and 0.45 for year 2
- Working capital returned in year 2 (not relevant for depreciation calculation)
Step 1: Calculate depreciation expense for each year.
For year 1:
Depreciation expense = Depreciable capital × Depreciation rate
= $4,800 × 0.55
= $2,640
For year 2:
Depreciation expense = Remaining depreciable capital × Depreciation rate
Remaining depreciable capital = Initial depreciable capital - Year 1 depreciation expense
= $4,800 - $2,640
= $2,160
Year 2 depreciation expense = $2,160 × 0.45
= $972
Step 2: Calculate accumulated depreciation expense.
Accumulated depreciation expense = Year 1 depreciation expense + Year 2 depreciation expense
= $2,640 + $972
= $3,612
So, the depreciation expense for year 1 is $2,640, for year 2 is $972, and the accumulated depreciation expense for both years is $3,612.
Learn more about Depreciation expense:- https://brainly.com/question/25785586
#SPJ11
how long is amazon's lookback window from the point of conversion, used in reporting ad-attributed metrics?
Amazon's lookback window from the point of conversion used in reporting ad-attributed metrics can vary depending on the specific metric being measured.
For example, for Sponsored Products and Sponsored Brands, the default attribution window is seven days after a customer click on an ad. This means that if a customer clicks on an ad and makes a purchase within seven days, that purchase will be attributed to the ad.
However, advertisers can also choose to extend the attribution window up to 90 days for Sponsored Products and 180 days for Sponsored Brands by enabling the Amazon Attribution program.
For Amazon DSP (Demand-Side Platform), the lookback window can vary from one day to 30 days, depending on the type of attribution being used.
To know more about amazon:
https://brainly.com/question/30665598
#SPJ4
Kolonas, Inc., sold equipment for $5,400 cash. The equipment cost $73,900 and had accumulated depreciation through the date of sale of $70,000. At the date of sale, the journal entry to record the sale will have: A. a Loss on Sale of Equipment for $1,500.
B. a Gain on Sale of Equipment for $3,900.
C. a Gain on Sale of Equipment for $1,500.
D. a Loss on Sale of Equipment for $3,900.
The journal entry to record the sale will include a credit to "Equipment" for $73,900, a debit to "Accumulated Depreciation" for $70,000, a debit to "Cash" for $5,400, and a credit to "Gain on Sale of Equipment" for $1,500.
The correct answer is C. a Gain on Sale of Equipment for $1,500.
To calculate the gain on the sale of equipment, we need to subtract the equipment's cost and accumulated depreciation from the sales price.
Sales price: $5,400
Cost of equipment: $73,900
Accumulated depreciation: $70,000
Book value of equipment = Cost - Accumulated Depreciation
Book value of equipment = $73,900 - $70,000 = $3,900
Gain on sale = Sales price - Book value of equipment
Gain on sale = $5,400 - $3,900 = $1,500
Therefore, the journal entry to record the sale will include a credit to "Equipment" for $73,900, a debit to "Accumulated Depreciation" for $70,000, a debit to "Cash" for $5,400, and a credit to "Gain on Sale of Equipment" for $1,500.
Learn more about Equipment here
https://brainly.com/question/30230359
#SPJ11
Nintendo, a Japanese company, redesigns parts of their original games to fit the preferences in the North American market. Which strategy is this for solving the globalization/offshoring challenges? a. cultural transferability b. postponement c. following local regulations d. third-Party Logistics (3PL)
The strategy that Nintendo is using to solve the globalization/offshoring challenges is cultural transferability (A).
By redesigning parts of their original games to fit the preferences in the North American market, they are ensuring that their products are culturally relevant and appealing to the local consumers. This is a common strategy used by companies to overcome the challenges of globalization and ensure the success of their products in foreign markets.
Globalization and offshoring have brought many challenges to companies, such as adapting to different cultural preferences, complying with local regulations, managing logistics, among others. To address these challenges, companies may use various strategies.
In the given scenario, Nintendo is adapting its products to fit the preferences of the North American market. This is an example of the cultural transferability strategy, which involves modifying products or services to fit local cultural preferences or norms. Cultural transferability helps companies achieve a better understanding of the local market and improve their product appeal to customers. It is a common strategy used by companies that operate in multiple countries or regions, as it allows them to create a more personalized approach to their products and services for different markets.
Learn more about Globalization: https://brainly.com/question/25499191
#SPJ11
The true cost of monopoly power to society is attributable to:
(a) the higher price that consumers must pay.
(b) the reduction in output by the monopolist.
(c) the excess profits enjoyed by the monopolist.
(d) the failure of other firms to enter the industry.
The true cost of monopoly power to society is attributable to all of the options presented. All options are correct.
(a) Higher Price: Monopolies have the power to raise prices above what would be considered competitive levels since they have no close substitutes. Consumers end up paying higher prices and this results in a transfer of wealth from consumers to the monopolist. This can lead to a reduction in consumer welfare, especially for lower-income consumers.
(b) Reduction in Output: Monopolies may limit output to increase prices and maximize profits. This reduction in output can lead to a decline in social welfare as a society may not have access to the goods or services they need.
(c) Excess Profits: Monopolies can earn excess profits because they can charge higher prices due to their market power. These excess profits are a deadweight loss to society since they are not earned through improved efficiency or innovation. They are a result of the monopolist's ability to restrict output and raise prices.
(d) Lack of Competition: Monopolies can deter the entry of new firms into the industry by using their market power to prevent other firms from entering the market or by acquiring any new entrants. This can lead to reduced innovation and inefficiencies, as the monopolist has no incentive to innovate or improve their processes.
Hence all the options are correct.
Learn more about Monopoly: https://brainly.com/question/28841635
#SPJ11
Select the most appropriate trade pact for each description.
11. An updated version of an existing trade agreement that includes new provisions for local content requirements for automakers and more open dairy trade.
(Click to select) USMCA NAFTA MERCOSUR Andean Community ASEAN EU
A revised trade deal that adds additional clauses for local content requirements for automobiles and more open dairy commerce. The USMCA is the answer. The revised NAFTA, known as USMCA, now includes new clauses requiring local content.
NAFTA: Is it still in effect?NAFTA was replaced with the USMCA on July 1st, 2020.
What is the purpose of NAFTA?NAFTA, which came into effect in 1994, was a significant trade agreement between Canada, Mexico, and the United States. The United States opposed it for causing job losses and outsourcing, but it was a major factor in the growth of trade and economic cooperation among the three nations.
To Know more about automobiles
https://brainly.com/question/1193772
#SPJ1
10. A firm has beginning inventory of 300 units at a cost of $11 each. Production during the period was 650 units at $12 each. If sales were 700 units, what is the value of the ending inventory using FIFO?
A. $2,750
B. $3,000
C. $3,300
D. $2,550
he value of the ending inventory using FIFO is $2,950.A firm has beginning inventory of 300 units at a cost of $11 each. Production during the period was 650 units at $12 each. If sales were 700 units,
The value of the ending inventory using the FIFO method can be calculated by first assuming that the units sold came from the beginning inventory and the units produced during the period. This means that the cost of goods sold for the 700 units is calculated as (300 x $11) + (400 x $12) = $5,500 + $4,800 = $10,300.
Next, we need to calculate the value of the ending inventory. Using the FIFO method, we assume that the units produced during the period are sold last and the beginning inventory is sold first. This means that the cost of the remaining 250 units in the ending inventory is calculated as (50 x $11) + (200 x $12) = $550 + $2,400 = $2,950.
Learn more about inventory here:
https://brainly.com/question/14184995
#SPJ11
Accounts Receivable Balance Beginning accounts receivable were $43,375. All sales were on account and totaled $187,600. Cash collected from customers totaled $182,450.
Calculate the ending accounts receivable balance.
The ending account receivable balance is $48,525.
The ending accounts receivable balance is an important metric for businesses as it represents the amount of money that is yet to be collected from customers, and it helps in managing the company's cash flow and liquidity.
To calculate the ending accounts receivable balance, you should follow these steps:
1. Start with the beginning accounts receivable balance of $43,375.
2. Add the total sales on account, which is $187,600.
3. Subtract the cash collected from customers, which is $182,450.
Your answer: The ending accounts receivable balance is $48,525.
Here's the step-by-step calculation:
$43,375 (Beginning accounts receivable) + $187,600 (Total sales on account) - $182,450 (Cash collected from customers) = $48,525 (Ending accounts receivable balance).
Learn more about cash flow : https://brainly.com/question/30736595
#SPJ11
What would you pay for the following stock, today, given a 6% expected return.Div1 = $2Div2 = $2.25Div3 = $3.50Div4 = $2.75P4* = $75
I would pay approximately $68.53 for the stock today, given a 6% expected return.
To determine the price you would pay for the following stock today, given a 6% expected return, we'll use the Dividend Discount Model. The given information is:
Div1 = $2
Div2 = $2.25
Div3 = $3.50
Div4 = $2.75
P4* = $75
Expected return = 6%
Step 1: Calculate the present value of each dividend
PV_Div1 = Div1 / (1 + expected return)^1 = $2 / (1 + 0.06)^1
PV_Div2 = Div2 / (1 + expected return)^2 = $2.25 / (1 + 0.06)^2
PV_Div3 = Div3 / (1 + expected return)^3 = $3.50 / (1 + 0.06)^3
Step 2: Calculate the present value of the stock price in year 4
PV_P4 = P4* / (1 + expected return)^4 = $75 / (1 + 0.06)^4
Step 3: Add the present values of all dividends and the stock price
Stock price today = PV_Div1 + PV_Div2 + PV_Div3 + PV_P4
Performing these calculations, you would pay approximately $68.53 for the stock today, given a 6% expected return.
Learn more about Dividend Discount Model : https://brainly.com/question/28174342
#SPJ11
an economic benefit to engaging in intra-industry trade between countries includes ________.a. greater variety of goods and services b. diseconomies of scale c. division of labor d. the value chain
An economic benefit to engaging in intra-industry trade between countries includes a greater variety of goods and services.
Engaging in intra-industry trade allows countries to specialize in the production of certain goods and services, leading to greater efficiency and a wider range of products available to consumers. This specialization can also lead to the division of labor, with each country focusing on producing what they are best at, further increasing economic efficiency. Additionally, the value chain of a product can be spread across multiple countries, allowing for cost savings and increased competitiveness. However, engaging in intra-industry trade may not always lead to economic benefits, as there can be diseconomies of scale when firms try to increase production beyond a certain point.
To know more about intra-industry trade
https://brainly.com/question/30972615
#SPJ11
During the year, Wright Company sells 470 remote-control airplanes for $110 each. The company has the following inventory purchase transactions for the year. Number of Unit Units Cost 60S 82 Transactions Beginning inventory Purchase otal Cost 4.920 Jan. 1 May. 5 90 10.000 Calculate ending Inventory and cost of goods sold for the year, assuming the company uses weighted-average cost. (Round your average cost per unit to 4 decimal places.) Coat of ande Ending Inventory-Welghted Aver Cost Welated Average Cost r Cost of Goods Sold-Weighted Average Cost cost of Goodels of units Average Cost Cost of Goods Available for Sald Average of units Cost per of units Average Cost In ending per unit inventory Endin inventi 60 Beginning inventory Purchase May 21250 18.000 44,170 510 S S 0.00 During the year, Wright Company sells 470 remote-control airplanes for $110 each. The company has the following inventory purchase transactions for the year. Date Jan. 1 May. 5 Nov. 3 Transaction Beginning inventory Purchase Purchase Number of Unit Units Cost 60 992 250 85 200 90 Total Cost $ 4.920 21,250 18,000 $44,170 510 Calculate ending inventory and cost of goods sold for the year, assuming the company uses specific identification. Actual sales by the company include its entire beginning inventory, 230 units of Inventory from the May 5 purchase, and 180 units from the November 3 purchase. Date Activity Units Sold Unit Cost Ending Inventory Units Unit Cost Ending Invento cost of Goods Sold 4,920 Jan. 1 May 5 Nov. 3 Beginning Inventory Purchase Purchase Total 4,920
The cost of goods sold for the year is $40,350 ($4,920 + $19,570 + $15,860) and the ending inventory is $8,770.
The company sold 60 units from the beginning inventory at a cost of $82 per unit, which results in a cost of goods sold of $4,920.
For the May 5 purchase, the company sold 230 units out of 992 units at a cost of $85 per unit. The remaining 762 units have a cost of $82 per unit. Thus, the cost of goods sold for the May 5 purchase is $19,570 (($230 x $85) + ($762 x $82)).
For the November 3 purchase, the company sold 180 units out of 250 units at a cost of $90 per unit. The remaining 70 units have a cost of $82 per unit. Thus, the cost of goods sold for the November 3 purchase is $15,860 (($180 x $90) + ($70 x $82)).
The ending inventory is made up of the remaining 22 units from the May 5 purchase at a cost of $82 per unit and the 85 units from the November 3 purchase at a cost of $82 per unit. The total cost of the ending inventory is $8,770 (($22 x $82) + ($85 x $82)).
For more such question inventory
https://brainly.com/question/26977216
#SPJ11
A tabular presentation that shows the outcome for each decision alternative under the various states of nature is called: A) a payback period matrix. B) a payoff table. C) a decision tree. D) a decision matrix.
The possible results of each alternative decision under various natural conditions are displayed in a payoff table. By taking the probabilities and rewards of each potential result into account, it aids decision-makers in determining the optimum alternative.
In a model decision issue, what does "payoff" mean?All potential combinations of decision options and natural state combinations are listed on a payoff table. The value anticipated from each choice is known as the Expected Payoff (EP) or Expected Monetary Value (EMV).
What method is referred to as the tabular way?When minimizing functions with a lot of variables, such the six-variable functions, the tabular method, also known as the Quine-McCluskey method, is especially helpful. Utilizing this approach, computer programs have been created.
To know more about payoff visit :
https://brainly.com/question/29646316
#SPJ1
Relevant. Irrelevant Sunk Cost Qualitative
$450 spent on application fee. Yes. Yes
$8,000 per year tuition. Yes
$60,000 salary with master's degree. Yes
$600 per month current rent. Yes
$25,000 current salary. Yes
Time spent with family and friends. Yes. Yes $50,000 new salary. Yes
$5,000 moving expenses. Yes $800 rent per month in new location. Yes
Cultural activities in the new location. Yes. Yes Ability to have MLB season tickets. Yes. Yes
for each of the following items, identify the differential amount in maria’s alternatives. for example, the incremental cost of tuition is $16,000 if maria chooses to pursue the master’s degree.
Rent
Salary per year for the next two years
Salary per year after two years
Moving expenses
Rent: Maria's incremental cost of rent would be the difference between her current rent ($600 per month) and the new rent ($800 per month) in the new location, which is $200 per month or $2,400 per year.
Salary per year for the next two years: If Maria chooses to pursue the master's degree, her salary for the next two years will be her current salary of $25,000. If she chooses not to pursue the degree, she will earn a new salary of $50,000 per year, resulting in an incremental cost of $25,000 per year for the next two years.
Salary per year after two years: If Maria chooses to pursue the master's degree, she will earn a higher salary of $60,000 per year after two years. If she chooses not to pursue the degree, she will still earn a salary of $50,000 per year after two years. Therefore, the incremental benefit of pursuing the degree would be $10,000 per year after two years.
Moving expenses: Maria's incremental cost of moving would be the $5,000 in moving expenses she would incur if she chooses to pursue the master's degree. If she chooses not to pursue the degree, she would not incur these moving expenses.
To learn more about incremental cost here:
https://brainly.com/question/13945982
#SPJ11
metlock, inc. reports net income of $60,900 in 2020. however, ending inventory was understated $7,900. what is the correct net income for 2020?
The correct net income for Metlock, Inc. in 2020 is $68,800.
To calculate the correct net income, you need to adjust the reported net income for the understated ending inventory. Metlock, Inc. reported a net income of $60,900, and the ending inventory was understated by $7,900. Add the understated inventory amount to the reported net income:
1. Reported net income: $60,900
2. Understated ending inventory: $7,900
3. Correct net income: $60,900 + $7,900 = $68,800
By adding the understated inventory amount to the reported net income, you correct the net income to accurately reflect the company's financial performance in 2020.
To know more about net income click on below link:
https://brainly.com/question/15570931#
#SPJ11
why it is that compliance, by itself, is not sufficient evidence to show that an organization values diversity.
To truly value diversity, organizations must demonstrate a commitment to inclusivity and implement strategies to support and promote diversity in all aspects of their operations.
Why compliance alone is not sufficient evidence to show that an organization values diversity?
Compliance, by itself, is not sufficient evidence to show that an organization values diversity.
Because compliance refers to following rules, regulations, and legal requirements related to diversity and inclusion in the workplace.
While complying with these regulations is necessary, it does not necessarily indicate that the organization actively promotes and fosters a diverse and inclusive environment.
Valuing diversity goes beyond compliance and involves creating a culture that appreciates, respects, and leverages the unique backgrounds, perspectives, and experiences of all individuals in the organization.
To truly value diversity, organizations must demonstrate a commitment to inclusivity and implement strategies to support and promote diversity in all aspects of their operations.
Learn more about diversity.
brainly.com/question/7063191
#SPJ11
American production is described as capital intensive, which means that:
A. Foreign investment is relatively small.
B. The ratio of machinery to labor is high
C. The ratio of labor to machinery is high.
D. Government control of production processes is high.
B. The ratio of machinery to labor is high. Capital intensive production means that a lot of capital is invested in machinery and equipment, rather than relying heavily on labor.
B. The ratio of machinery to labor is high. Capital intensive production means that a lot of capital is invested in machinery and equipment, rather than relying heavily on labor. This typically leads to a higher output of goods or services, but with fewer workers needed to produce them. Foreign investment may or may not be involved, but it is not necessarily related to whether production is capital intensive or not. Government control of production processes may also vary, but it is not a defining characteristic of capital intensive production.
Learn more about Capital intensive production here
https://brainly.com/question/28169463
#SPJ11
a bank quotes gbp/usd at 1.5436-40. if a trader wishes to buy usd, what is the correct quote to consider? review later sell gbp for 1.5440 buy gbp for 1.5436 buy gbp for 1.5440 sell gbp for 1.5436
If a trader wishes to buy USD using GBP, they should consider the higher quote in the GBP/USD spread, which is 1.5440. This means the trader will need to sell GBP for 1.5440 to buy USD.
What is mean by GBP/USB?
The GBP/USD currency pair is the world's third most widely traded currency pair.
It is affected by economic indicators and actions by the central banks in both countries to boost or devalue their currency.
The British pound is historically stronger than the U.S. dollar, although it has steadily weakened in the decades after World War II.
After the Great Recession, the pound lost nearly one-third of its value as investors flocked to the dollar.
Investors can trade the GBP/USD pair, along with other currencies, through any forex broker.
Understanding the GBP/USD (British Pound/U.S. Dollar)
The value of the GBP/USD pair is quoted as 1 British pound per X U.S. dollars. For example, if the pair is trading at 1.50, it means that it takes 1.5 U.S. dollars to buy 1 British pound.
The GBP/USD is among the top five most widely traded pairs in the world. It is affected by factors that influence the value of the British pound and/or the U.S. dollar in relation to each other and other currencies. For this reason, the interest rate differential between the Bank of England (BoE) and the Federal Reserve will affect the value of these currencies when compared with each other.
When the Fed intervenes in open market activities to make the U.S. dollar stronger, for example, the value of the GBP/USD cross could decline, due to a strengthening of the U.S. dollar when compared with the British pound.
$432 billion
The amount of money that changes hands through the GBP/USD pair every day.
Great Recession, Brexit, and Beyond
During the Great Recession, the value of the British pound fell sharply. In 2007, the GBP/USD pair traded to an all-time high above $2.10, before falling below $1.40 in 2009, losing over one-third of its value as investors flocked to the U.S. dollar—a so-called safe-haven currency.
In the five or so years following the Great Recession, the British pound recovered to trade around 1.6 against the U.S. dollar.
The GBP/USD had another sharp decline in June 2016, when Britain voted to leave the European Union. The GBP/USD pair fell 10% in one trading session and lost nearly 20% in the month preceding the Brexit vote. The vote to leave the EU was seen as negative for the British economy, as it would be forced to renegotiate trade deals, and this uncertainty led to investors pulling money out of the U.K. at a record pace.
In September 2022, Liz Truss took over as U.K. prime minister, replacing the embattled Boris Johnson, who resigned amid multiple scandals. Upon taking the reins, Truss announced plans for widespread tax cuts, hoping to boost U.K. economic productivity. However, investors and forex traders were apparently concerned that the economic policies of the Truss government could increase the country's debt and exacerbate inflation, which was already at an elevated level. The market's negative reaction sank the GBP/USD to an all-time low around 1.03 on Sept. 26, 2022. Following a slight recovery, the pair was trading in early October 2022 at just over 1.12.
From the last half of 2008 to early 2009, the British pound fell from $2.10 to below $1.40, losing over a third of its value. This is likely because investors considered the dollar a "safe haven" against market volatility.
to know more about the trader:
https://brainly.com/question/27622280
#SPJ11
A small grocery store has a single checkout line. On Saturdays, customers arrive at the checkout on an average of one every 8 minutes. The cashier takes an average of 6 minutes to process a single customer. We assume that the service time is randomly distributed, and the customers arrive randomly. The store's owner believes that the amount of time that a customer has to wait hurts his business; he estimates that waiting time costs him S20 per hour in lost business. In order to speed up service, the owner is considering hiring a teenager to bag the groceries at $6 per hour. With the addition of the bagger, the cashier will be able to process a customer in an average of 4.5 minutes. Should the bagger be hired?
If the bagger can serve at least 36 customers per hour, then it is worth hiring them to reduce waiting times and increase customer satisfaction.
To determine whether the bagger should be hired, we need to compare the costs and benefits of doing so. Currently, the store has an average customer arrival rate of one every 8 minutes, and each customer takes an average of 6 minutes to be served by the cashier. This means that customers are waiting an average of 2 minutes in line. If the store hires the bagger, the cashier will be able to process a customer in an average of 4.5 minutes, reducing the average wait time to 1.5 minutes.
However, hiring the bagger comes with an additional cost of $6 per hour. To determine if this cost is worth it, we need to calculate the cost of waiting time. The store's owner estimates that waiting time costs him $20 per hour in lost business. Assuming that each customer spends an average of $10 in the store, this means that each minute of waiting time costs the store $0.33.
Therefore, the cost of 2 minutes of waiting time is $0.66 per customer . If the bagger is able to reduce the average wait time by 0.5 minutes, the cost savings per customer is $0.165. If the bagger can serve at least 36 customers per hour (since the cost of the bagger is $6 per hour), then the cost savings will exceed the cost of hiring the bagger. k
To now more about customer satisfaction refer to
https://brainly.com/question/29458927
#SPJ11
(Related to Checkpoint 5.6) (Solving for O At what annual interest rate, compounded annually, would$510 have to be invested for it to grow to Sl in 13 years?The annual interest rate, compounded annually, at which $510 must be invested for it to grow to Sl ,956.88in 13 years is [----]%. (Round to two decimal places.)
Compound interest is the interest calculated on both the principal amount and any accumulated interest from previous periods. the annual interest rate, compounded annually, at which $510 must be invested for it to grow to $1,956.88 in 13 years is 5.9%.
The formula to use for this problem is:
S = P(1 + r)/t ⁻¹
Where:
S = final amount (S1,956.88 in this case)
P = initial amount ($510)
r = annual interest rate (what we are solving for)
t = time (13 years)
Substituting in the given values, we get:
S1,956.88 = $510(1 + r)¹³
Dividing both sides by $510, we get:
3.837 = (1 + r)¹³
Taking the 13th root of both sides, we get:
1 + r = 1.059
Subtracting 1 from both sides, we get:
r = 0.059 or 5.9%
Interest rate is 5.9%
Learn more about compound interest https://brainly.com/question/28020457
#SPJ11
True or False. The primary purpose of all warehouses is to store products.
The statement "The primary purpose of all warehouses is to store products" is true.
A warehouse is a commercial building where goods are stored until they are needed. Warehouses are designed to accommodate large quantities of goods, and they are used to store everything from raw materials to finished products. The products may be stored for a short or long time, depending on the needs of the company.
In addition to storing products, warehouses may also be used for other purposes such as packaging, assembly, and distribution. Many warehouses have loading docks, forklifts, and other equipment that is used to move and transport products. Some warehouses also have offices and administrative areas where managers and staff can work.
The primary purpose of a warehouse is to provide a safe and secure environment for storing goods. Warehouses are designed to protect products from damage, theft, and other hazards. They are also used to help companies manage their inventory and ensure that products are available when they are needed.
In conclusion, the primary purpose of all warehouses is to store products. However, they may also be used for other purposes such as packaging, assembly, and distribution. Warehouses are an essential part of the supply chain, and they play a critical role in ensuring that products are available when they are needed.
To learn more about warehouses refer here:
https://brainly.com/question/30050363
#SPJ11
A project's critical path is ABDE. The project activity information (in weeks) are as follows. Assume the project finish time follows a normal distribution. A B С D E F. Activity Expected FT 8 10 5 4 3 4 Variance 7 10 2 2 4 2 If the project deadline is set to be 29 weeks, then what is the z-value to determine the probability that the project will be finished before the given deadline? Numbers only. Keep 3-decimal if not exact, either round up or down is ok.
The z-value to determine the probability that the project will be finished before the given deadline is approximately 0.834.
To determine the z-value for the probability that the project will be finished before the given deadline of 29 weeks, we will follow these steps:
1. Calculate the total expected project finish time for the critical path (ABDE).
2. Calculate the total variance for the critical path.
3. Calculate the standard deviation of the critical path.
4. Calculate the z-value using the formula: (deadline - total expected project finish time) / standard deviation.
1. Total expected project finish time (ABDE):
A (8 weeks) + B (10 weeks) + D (4 weeks) + E (3 weeks) = 25 weeks
2. Total variance for the critical path (ABDE):
A (7) + B (10) + D (2) + E (4) = 23
3. Standard deviation of the critical path:
sqrt(23) ≈ 4.795
4. Z-value calculation:
(29 weeks deadline - 25 weeks expected finish time) / 4.795 ≈ 0.834
You can learn more about probability at: brainly.com/question/30034780
#SPJ11
Which of the following is the correct order of the four steps used in developing an activity-based costing system?
A.
1) Identify the allocation base for each activity and estimate the total quantity of each allocation base, 2) Identify the activities that will be used to allocate overhead and estimate their costs, 3) Compute the predetermined overhead rate for each activity, 4) Allocate indirect costs to the cost object
B.
1) Identify the activities that will be used to allocate overhead and estimate their costs, 2) Identify the allocation base for each activity and estimate the total quantity of each allocation base, 3) Compute the predetermined overhead rate for each activity, 4) Allocate indirect costs to the cost object
C.
1) Identify the allocation base for each activity and estimate the total quantity of each allocation base, 2) Identify the activities that will be used to allocate overhead and estimate their costs, 3) Allocate indirect costs to the cost object, 4) Compute the predetermined overhead rate for each activity
D.
1) Allocate indirect costs to the cost object, 2) Identify the allocation base for each activity and estimate the total quantity of each allocation base, 3) Identify the activities that will be used to allocate overhead and estimate their costs, 4) Compute the predetermined overhead rate for each activity
1) Identify the allocation base for each activity and estimate the total quantity of each allocation base, 2) Identify the activities that will be used to allocate overhead and estimate their costs. The answer is OPTION C
3) Allocate indirect costs to the cost object, 4) Compute the predetermined overhead rate for each activity used in developing an activity-based costing system. ABC is a technique for allocating overhead and indirect costs, such salaries and utilities, to goods and services.
The ABC system of cost accounting is built around activities, which are defined as any occasion, project, or task with a clear objective. Examples include the amount of space required per product, which is used to divide the factory's rent and the company's maintenance costs. Another example is the quantity of purchase orders (i.e., POs), which is used to divide the purchasing department's costs. The answer is OPTION C
To learn more about accounting, click here.
https://brainly.com/question/22917325
#SPJ4
All business decisions involve aspects of risk and return. Rank order the following investment activities from 1 through 4, where "1" is most risky and "4" is least risky. a. U.S. government Treasury Bond b. Stock of a highly successful company Medium-risk corporate bond d. High-risk corporate bond C.
The order of following investment activities in terms of risk and return is-1. (d)High-risk corporate bond 2. (b)Stock of a highly successful company 3.(c) Medium-risk corporate bond 4.(a) U.S. government Treasury Bond
The ranking is based on the level of risk associated with each investment activity. High-risk corporate bonds have the highest risk because they are issued by companies that are not financially stable, and there is a higher chance of default. Stocks of highly successful companies are the second riskiest because the value of the stock can be affected by market fluctuations and company-specific factors. Medium-risk corporate bonds are considered less risky than stocks and high-risk corporate bonds, but still carry a moderate level of risk. U.S. government Treasury bonds are the least risky because they are backed by the full faith and credit of the U.S. government, making them a safe and secure investment with lower returns.
To know more about Risk and Return, follow: https://brainly.com/question/11541998
#SPJ11
A corporation reported cash of $25,800, total assets of $455,000, and total equity of S155,940 on its balance sheet. Its common-size percent for cash equals: Multiple Choice a. 1764% b. 56.70% c. 100.00% d. 5.67%e. 1764%
The correct option is d. 5.67%, its common size percent for cash equals.
The common-size percent for cash, can be derived by divide the cash amount by the total assets and multiply by 100. In this case, the corporation reported cash of $25,800, total assets of $455,000, and total equity of $155,940.
Firstly, dividing cash by total assets:
$25,800 / $455,000 = 0.056703
Then, multiply the result by 100 to get the percentage:
0.056703 * 100 = 5.67%
The common-size percent for cash equal 5.67% , Option d.
To learn more about assets: https://brainly.com/question/25746199
#SPJ11
Using the following table the marginal utility of the 4th movie is: Movies Total Utility 0 0 1 40 2 75 3 105 4 130 5 150 O 25O 130 O 235
The marginal utility of the 4th movie can be calculated by taking the difference between the total utility of the 4th and 3rd movies. In this case, the total utility of the 4th movie is 130 and the total utility of the 3rd movie is 105, so the marginal utility of the 4th movie is 25.
Marginal utility refers to the additional satisfaction or usefulness a person derives from consuming an additional unit of a good or service. So, consuming the 4th movie provides an additional 25 units of satisfaction or usefulness compared to consuming only the first 3 movies. Based on the provided table, the marginal utility of the 4th movie can be calculated by finding the difference in Movies Total Utility between the 4th and 3rd movies. Here's the calculation:
Marginal Utility of the 4th movie = Total Utility of 4 movies - Total Utility of 3 movies
Marginal Utility of the 4th movie = 130 - 105
Marginal Utility of the 4th movie = 25
So, the marginal utility of the 4th movie is 25.
To know more about marginal utility
https://brainly.com/question/15050855
#SPJ11
Laws requiring employers to provide health insurance to their employees put the burden of health insurance costs: a. mostly on employers if labor demand is less elastic than labor supply. b. solely on firms (labor demanders), which will most likely lead to increases in unemployment. c. mostly on employees if labor supply is more elastic than labor demand. d. mostly on employees if labor supply is less elastic than labor demand.
The burden of health insurance costs is mostly on employees if labor supply is less elastic than labor demand.
What is labor supply?
When labor supply is less elastic than labor demand, employers have more bargaining power and can shift the burden of health insurance costs onto employees by reducing wages. Therefore, laws requiring employers to provide health insurance to their employees put the burden of health insurance costs mostly on employees if labor supply is less elastic than labor demand. However, if labor supply is more elastic than labor demand, employees have more bargaining power and may be able to negotiate higher wages to offset the cost of health insurance, shifting the burden mostly onto employers.
When labor demand is less elastic than labor supply, employers may have to bear most of the cost of health insurance because they cannot easily replace workers who demand higher wages to cover health insurance costs. If the burden is solely on firms (labor demanders), it may lead to increases in unemployment as firms may reduce their demand for labor due to higher labor costs.
To know more about labor supply, visit:
https://brainly.com/question/31028780
#SPJ1
After the housing bubble popped in 2007, Congress did not pass a stimulus bill until February 2009. This is an example of: Multiple Choice an implementation lag. an information lag a direction lag a formulation lag
The correct answer is a formulation lag. A formulation lag refers to the time delay between the recognition of a problem or issue and the implementation of a policy or action to address it.
What is Policy?
Policy refers to a set of principles, guidelines, or rules that are established by individuals, organizations, or governments to guide decision-making and action. Policies are often developed to achieve specific objectives or goals and are typically based on principles, values, and evidence. Policies can be formal or informal, written or unwritten, and can cover a wide range of areas, such as government, business, education, healthcare, and social issues.
In this case, after the housing bubble popped in 2007, it took Congress until February 2009 to pass a stimulus bill, indicating a delay in formulating and implementing a policy response to address the economic challenges caused by the housing market collapse.
Learn more about Policy from the given link
https://brainly.com/question/6583917
#SPJ1
Stock H has a beta of 1.8, while Stock L has a beta of 0.4. If investors’ aversion to risk increased...
a. the risk premium of Stock H would increase by more. b. the risk premium of Stock L would increase by more. c. the risk premiums of Stock H and L would remain unchanged. d. the risk premiums of Stock H and L would increase by the same amount.
Investors seek a bigger risk premium for owning a certain stock as their aversion to risk rises. Therefore, option a is the best choice: Stock H's risk premium would rise higher. Option a is Correct.
A stock's beta is closely correlated with its risk premium. Investors want a bigger risk premium as beta increases. Similar to this, less risk premium is needed by investors the lower the beta.
Because of this, Stock H's risk premium, which has a beta of 1.8, would rise more than Stock L's, which has a beta of 0.4, as investors' aversion to risk grows. Option a is Correct.
Learn more about Stock visit: brainly.com/question/26128641
#SPJ4
Let's investigate our economy:
1. What are the four components of the GDP?
2. Name three ways GDP affects you?
3. What is the GNP, and how does it differ from GDP?
4. What is a recession?
5. What are the factors that cause a recession?
6. What is economic recovery?
Let’s understand unemployment:
7. What is unemployment?
8. As a student, what is the best thing you can do to prevent long-term unemployment for yourself?
Answer:
The four components of GDP are consumption, investment, government spending, and net exports.
Three ways GDP affects individuals are: (1) it indicates the overall health of the economy, which can affect job opportunities and wages; (2) it can affect interest rates and inflation, which can impact the cost of borrowing money and the value of savings; and (3) it can influence government policies and programs, such as tax rates and social welfare programs.
GNP stands for Gross National Product, which measures the total value of goods and services produced by a country's citizens and companies, regardless of their location. GDP, on the other hand, measures the total value of goods and services produced within a country's borders, regardless of who produces them. The main difference is that GNP includes income earned by citizens and companies abroad, while GDP does not.
A recession is a period of significant economic decline, characterized by a contraction in GDP, rising unemployment, and a decline in consumer and business spending.
There are several factors that can cause a recession, including a decline in consumer confidence, a decrease in business investment, a decrease in government spending, and external shocks such as natural disasters or global economic crises.
Economic recovery refers to the period following a recession, during which the economy begins to grow again and the levels of employment, consumer and business spending, and GDP increase.
Unemployment refers to the state of being without a job, actively seeking employment, and willing and able to work.
As a student, the best thing you can do to prevent long-term unemployment is to acquire skills and knowledge that are in demand in the job market, network with professionals in your field, and gain practical experience through internships or volunteer work. It is also important to be proactive in your job search and to continually update your skills and knowledge to stay competitive in the job market.
Explanation:
Assume an economy with a full employment (potential) real GDP of $600, an actual (equilibrium) real GDP of $500, and an MPC = 0.90 Answer the following questions. Graphically illustrate the state of this economy using an AD-AS model.
Overall, this economy is experiencing a recessionary gap, leading to higher unemployment rates and a lower overall output than its potential. The MPC of 0.90 suggests that there is a high propensity to consume, which may be useful in implementing policies to stimulate the economy and close the recessionary gap.
In this scenario, the actual real GDP is below the potential real GDP, which indicates a recessionary gap. The economy is not producing at its full potential, resulting in higher unemployment rates.
To graphically illustrate this using an AD-AS model, we can plot the aggregate demand (AD) curve and the short-run aggregate supply (SRAS) curve. The AD curve represents the total demand for goods and services in the economy, while the SRAS curve represents the total supply of goods and services in the short run.
In this case, the AD curve would intersect with the SRAS curve to the left of the long-run aggregate supply (LRAS) curve, as the economy is not producing at its full potential. This intersection point represents the equilibrium point of the economy, where the actual real GDP is equal to the aggregate demand.
Since the actual real GDP is below the potential real GDP, the equilibrium point would be below the LRAS curve, indicating a recessionary gap. This gap represents the difference between the potential and actual real GDP and signifies the amount of output that is not being produced due to the recession.
Overall, this economy is experiencing a recessionary gap, leading to higher unemployment rates and a lower overall output than its potential. The MPC of 0.90 suggests that there is a high propensity to consume, which may be useful in implementing policies to stimulate the economy and close the recessionary gap.
Learn more about unemployment rates here
https://brainly.com/question/29955979
#SPJ11
Which factor will shift the short-run aggregate supply curve to the RIGHT? a. a widespread decrease in commodity prices b. a decrease in productivity c. an increase in nominal wages d. a decrease in government purchases of goods and services
The short-run aggregate supply curve will shift to the right if there is a decrease in commodity prices.
Here, correct answer is A.
This is because businesses will be able to produce more goods at a lower cost, which will increase their profits. As a result, producers will be able to increase their output levels, leading to an increase in the supply of goods and services. This shift in the short-run aggregate supply curve to the right will result in a lower price level and a higher level of output.
Other factors that could shift the short-run aggregate supply curve to the right would include a decrease in productivity, an increase in nominal wages, and a decrease in government purchases of goods and services. A decrease in productivity could lead to a decrease in the cost of production, leading to an increase in supply.
Therefore, correct option is A.
know more about supply curve here
https://brainly.com/question/1915798#
#SPJ11