Given that z is a standard normal random variable, and that the area to the right of z is 0.9066, then the value of z must be: a. -0.66. b. -1.32. c. 1.32. d. 0.66.

a) The margin of your account when you first purchase the stock is 50%. b) The remaining margin of your account is 40%. c)  The remaining margin of your account is still above the maintenance margin of $225, you will not receive a margin call from your broker at this point.

a. To calculate the margin of your account when you first purchase the stock, we need to determine the total cost of the purchase and the amount of your own funds that you contributed.

The total cost of the purchase is calculated as 50 shares x $42 per share = $2,100. Since you financed half of the purchase yourself, you contributed $1,050 of your own funds.

The margin can be calculated using the following formula:

Margin = (Total value of the securities - Amount borrowed) / Total value of the securities

In this case, the amount borrowed is also $1,050, since you borrowed half of the purchase from your broker. Therefore, the margin can be calculated as:

Margin = ($2,100 - $1,050) / $2,100 = 0.5 or 50%

b. If the price falls to 35 immediately, the value of your holdings will decrease to 50 shares x $35 per share = $1,750. We can calculate the remaining margin of your account using the same formula as before:

Margin = (Total value of the securities - Amount borrowed) / Total value of the securities

In this case, the amount borrowed remains the same at $1,050, but the total value of the securities has decreased to $1,750. Therefore, the remaining margin can be calculated as:

Margin = ($1,750 - $1,050) / $1,750 = 0.4 or 40%

So, the remaining margin of your account is 40%.

c. Finally, we need to determine if you will receive a margin call from your broker if the maintenance margin is 30%. The maintenance margin is the minimum margin that must be maintained in the account to avoid a margin call.

The maintenance margin can be calculated using the following formula:

Maintenance margin = (Total value of the securities x Maintenance margin rate) - Amount borrowed

In this case, the maintenance margin rate is 30%, and the amount borrowed remains at $1,050. Therefore, the maintenance margin can be calculated as:

Maintenance margin = ($1,750 x 0.3) - $1,050 = $225

However, if the value of your holdings were to decrease further, such that the remaining margin falls below the maintenance margin, your broker would issue a margin call and you would be required to deposit additional funds or securities to bring the margin back up to the maintenance level.

For more such questions on margin visit:

https://brainly.com/question/28180283

#SPJ11

When Eric sells his property to Kelsey, the easement that Robert has over the portion of the property will typically continue, as easements generally run with the land. This means that Kelsey will take ownership of the property subject to the existing easement.

The easement only is allowed to continue if Kelsey is made aware of the easement by Robert and Eric consents to the continuation of the easement. When Eric sells his property to Kelsey, the easement does not automatically transfer to Kelsey.

However, Robert can continue to use the easement as long as Kelsey is made aware of it and Eric consents to the continuation of the easement. If Kelsey does not agree to the easement, then it may need to be renegotiated or canceled.

To know more about Property click here.

brainly.com/question/29528698

#SPJ11

A client-server network model is a type of network architecture where one or more central servers manage resources, control access, and provide services to a group of client devices or users. In a client-server network, clients (such as desktop computers, laptops, or mobile devices) make requests to the server, which then responds with the requested information or service.

The server is responsible for managing data storage, network security, and other network resources, while clients primarily use these resources.

Based on the description provided, it is most likely that ABC Corporation is using a client-server network model because:

Therefore, a client-server network model is the most likely network model used by ABC Corporation.

To know more about network

https://brainly.com/question/15088389

#SPJ1

The following statement "the griggs case established the principle that employment selection practices must be related to job success" is absolutely True.

The Griggs case, decided by the US Supreme Court in 1971, established the principle of "job-relatedness" in employment selection practices, meaning that such practices must be related to job success and cannot unfairly discriminate against protected groups under Title VII of the Civil Rights Act.

True, the Griggs v. Duke Power Co. case established the principle that employment selection practices must be related to job success, ensuring that they are not discriminatory and are based on a candidate's ability to perform the job effectively.

Visit here to learn more about  job success : https://brainly.com/question/29440695
#SPJ11

By supposing the real rate is 3.45 percent and the inflation rate is 22 percent. The rate expected to earn on a Treasury bill is 1.0135 or 1.35%. The closest option to answer is A) 1.25 percent.

To find the rate you would expect to earn on a Treasury bill, you'll need to use the Fisher equation, which relates the real rate, the inflation rate, and the nominal rate.

The Fisher equation is:
Nominal rate = Real rate + Inflation rate + (Real rate x Inflation rate)

Using the given information:
Real rate = 3.45%
Inflation rate = 22%

Plug these values into the Fisher equation:
Nominal rate = 3.45 + 22 + (3.45 x 22)

Now, calculate the Nominal rate:
Nominal rate = 3.45 + 22 + 75.9
Nominal rate = 101.35

To find the rate as a percentage, divide the result by 100:
Nominal rate = 101.35 / 100
Nominal rate = 1.0135 or 1.35% (rounded to two decimal places)

Based on the options provided, the closest answer to the calculated rate is:

A) 1.25 percent

You can learn more about the inflation rate at: brainly.com/question/30907190

#SPJ11

The entry is recorded without any explanations or details. This is because we are only concerned with the debits and credits involved in the transaction.

Based on the provided information, Thames Corporation uses a perpetual system for inventory accounting. Therefore, the inventory transactions for the year ended June 30, 2021 should be recorded in the inventory account as they occur.

The first transaction recorded in the accounting records is the purchase of inventory. To journalize this transaction, we need to record the debits and credits involved. Since we are using the perpetual system, we will be updating the inventory account directly.

Here is the journal entry for the purchase of inventory:

Journal Entry
Date        Accounts                 Debit            Credit
Jun 30     Inventory                     $180,000
                 Accounts Payable                  $180,000

In this entry, the inventory account is debited for the cost of the inventory purchased, which is $180,000. On the other hand, the accounts payable account is credited for the same amount since the inventory was purchased on credit.

Note that the entry is recorded without any explanations or details. This is because we are only concerned with the debits and credits involved in the transaction.

Learn more about transaction here

https://brainly.com/question/24730931

#SPJ11

Yes, that is correct.  The capital expenditures budget is an important tool for companies to manage their investments in plant assets and to ensure that they are making wise financial decisions.

Yes, that is correct. A capital expenditures budget is a financial plan that outlines the expected dollar amounts that a company will spend to acquire new plant assets and the amounts that are anticipated to be received from the sale or disposal of existing plant assets. Plant assets are long-term assets, such as land, buildings, equipment, and machinery, that a company uses to produce goods and services. The capital expenditures budget is an important tool for companies to manage their investments in plant assets and to ensure that they are making wise financial decisions.

Learn more about capital expenditures here

https://brainly.com/question/16001079

#SPJ11

All of these can be derived from the information on the balance sheet. The balance sheet provides a snapshot of a company's financial position at a specific point in time, including its assets, liabilities, and equity. From this information, one can analyze the company's industry by examining its current assets, current liabilities, and long-term investments.

Additionally, the company's performance can be assessed by analyzing its revenue, expenses, and net income. Finally, the balance sheet can provide insight into the company's strategies, such as its financing decisions, by examining its debt-to-equity ratio and other financial metrics.

Overall, the balance sheet is a valuable tool for understanding a company's financial health and trajectory.

To know more about balance sheet refer here:

https://brainly.com/question/26323001#

#SPJ11

Answer:

Target sales (in units)= FC + NIBT= 840, 000 +105, 000= 27, 000 unitsAverage CM50(2)+20(1)+30(3)2 +1+3Product LinesTarget sales in unitsTarget sales inbirrsEthio-0127, 000 x 2/6= 9, 000 units9, 000 x150=Br.1,350,000Ethio-0227, 000 x 1/6 = 4, 5004, 500 x 80 =360, 000Ethio-0327, 000 x 3/6= 13, 50013, 500 x 40 =540000

Explanation:

1. Total labor cost = $509,405. 2. To record the salaries and wages earned by employees, as well as the employee income taxes and FICA taxes withheld from their paychecks, and to record the amount owed to employees for the month of March.

1.The total labor cost for the company can be calculated as follows:

Salaries and wages earned = $410,000

Employee income taxes withheld = $37,925

FICA taxes withheld = $29,315

Unemployment taxes = $2,850

Employee payroll taxes = $37,925 + $29,315 = $67,240

Employer payroll taxes = $29,315 + $2,850 = $32,165

Total labor cost = Salaries and wages earned + Employee payroll taxes + Employer payroll taxes

Total labor cost = $410,000 + $67,240 + $32,165

Total labor cost = $509,405

2. The journal entry to record the payroll for March, including employee deductions (but excluding employer payroll taxes) would be:

Salaries and Wages Expense $410,000

Employee Income Taxes Payable $37,925

FICA Taxes Payable $29,315

Wages Payable $342,760

To record the salaries and wages earned by employees, as well as the employee income taxes and FICA taxes withheld from their paychecks, and to record the amount owed to employees for the month of March.

For more such questions on labor cost:

https://brainly.com/question/26245657

#SPJ11

The correct answer is (a) and (b) of the above. The main differences between permanent life insurance (PLI) and term life insurance (TLI) policies are that the premium paid for TLI is generally lower than that paid for PLI, and TLI has always a larger death benefit than PLI.

PLI is a sounder choice than TLI in case of the bankruptcy of the insurance company Ba On Pra Roti is not necessarily true, as both types of policies are regulated and insured by state guaranty associations. Therefore, the correct answer is (a) and (b) of the above.

To know more about Term Life Insurance click here https://brainly.com/question/15840647

#SPJ11

The gas station business is known to have large barriers to entry due to high fixed costs involved in setting up and operating a gas station.

These costs include land acquisition, construction, equipment, and regulatory requirements, making it difficult for new entrants to enter the market. As a result, in a small town, it is not uncommon for only two gas stations to be present.

In such a scenario, the existing gas stations can earn an economic profit in the long run due to the lack of competition. Economic profit refers to the revenue earned over and above the opportunity cost of the resources used in production. In the absence of competition, the existing gas stations can charge a higher price for their products, generating a profit.

However, in the long run, the existing gas stations must produce at the minimum average total cost to stay profitable. Average total cost (ATC) refers to the total cost of production per unit of output. The existing gas stations must operate efficiently and produce at the minimum ATC to remain competitive and attract customers.

Lastly, the existing gas stations must produce a level of output such that their marginal revenue (MR) equals their marginal cost (MC) to maximize their profit. Marginal revenue refers to the additional revenue earned by producing one more unit of output, while marginal cost refers to the additional cost incurred in producing one more unit of output. The existing gas stations must find the balance between the two to ensure that they are maximizing their profit.

In conclusion, the large barriers to entry in the gas station business explain why only two gas stations may exist in a small town. The existing gas stations can earn an economic profit in the long run, but they must also produce at the minimum ATC and find the optimal level of output to maximize their profit.

To learn more about large barriers refer here:

https://brainly.com/question/13910056

#SPJ11

The Materials handling overhead cost assigned to Job #971 is $8,400. The correct option is (c).

To assign the overhead costs using Activity-Based Costing (ABC), we need to first calculate the predetermined overhead rate for each activity cost pool. This is done by dividing the overhead cost pool by the budgeted level for the cost driver.

For Materials handling:

Predetermined overhead rate = $160,000 / 4,000 pounds = $40 per pound

Next, we can calculate the overhead cost assigned to Job #971 for the Materials handling activity as follows:

Materials handling overhead cost assigned to Job #971 = Predetermined overhead rate * Actual level of cost driver usage for Job #971

= $40 per pound * 210 pounds

= $8,400. Therefore, The answer is (c) $8,400.

To know more about overhead cost click here

brainly.com/question/13384595

#SPJ11

This goal emphasizes the importance of preventing the spread of infections in healthcare settings and encourages healthcare professionals to implement evidence-based strategies to reduce the risk of HAIs. By following this goal, I can ensure that my patients receive high-quality care that is safe and free from harm.

As a healthcare professional, I always prioritize the safety of my patients by incorporating standard precautions and infection control guidelines. One particular precaution that I ensure is the proper hand hygiene before and after interacting with a patient or touching any equipment. I follow the Centers for Disease Control and Prevention (CDC) guidelines for hand hygiene, which includes using soap and water or an alcohol-based hand rub.

To control the spread of infections, I also make sure to follow other control guidelines such as wearing appropriate personal protective equipment (PPE) when needed and properly disinfecting any equipment or surfaces that come into contact with patients. This helps to prevent the spread of harmful microorganisms that can cause infections.

In my practice, I use the national patient safety goal of preventing healthcare-associated infections (HAIs) to guide my infection control practices. This goal emphasizes the importance of preventing the spread of infections in healthcare settings and encourages healthcare professionals to implement evidence-based strategies to reduce the risk of HAIs. By following this goal, I can ensure that my patients receive high-quality care that is safe and free from harm.

Learn more about healthcare professionals here

https://brainly.com/question/31217221

#SPJ11

Standard precautions are the basic infection prevention practices that apply to all patients in all healthcare settings, regardless of their diagnosis or presumed infection status.

These precautions include hand hygiene, use of personal protective equipment (PPE), respiratory hygiene and cough etiquette, safe injection practices, and safe handling of contaminated equipment and surfaces. Standard precautions are the first line of defense in preventing healthcare-associated infections (HAIs).

In addition to standard precautions, healthcare settings also implement transmission-based precautions when patients are known or suspected to have certain infections that require additional precautions. These precautions are based on the mode of transmission of the infectious status, and may include contact precautions, droplet precautions, or airborne precautions.

To learn more about  infection status, visit here

https://brainly.com/question/31055852

#SPJ4

As production increases, the average fixed cost will stay constant, meaning that the cost of fixed resources used in production, such as rent and machinery, remains the same regardless of the level of output.

However, the average variable cost will not necessarily always increase, as it depends on the efficiency of production. Initially, as production increases, the average variable cost may decrease due to economies of scale, such as the ability to purchase materials in bulk at a lower cost.

However, at a certain point, the average variable cost may start to increase due to diseconomies of scale, such as the need for additional labour or the cost of maintaining larger facilities.

Therefore, the trend of the average variable cost will depend on the specific production process and the management of resources.

For more such questions on fixed cost

brainly.com/question/20670674

#SPJ11

Banks are justified in treating profitable and unprofitable customers differently because ultimately, their goal is to make a profit. Banks have a responsibility to their shareholders to maximize profits and minimize losses.

On the other hand, unprofitable customers are a drain on the bank's resources. These customers may have lower credit scores, higher delinquency rates, or lower account balances, which means that they are less likely to generate revenue for the bank. Banks may choose to limit their exposure to these customers by offering them less favorable terms or even denying them services altogether.
Of course, this doesn't mean that banks can or should treat unprofitable customers unfairly. Banks have a duty to treat all customers fairly and comply with regulations that protect consumers from discrimination. But from a business standpoint, it is understandable why banks would focus on their profitable customers and seek to minimize their losses from unprofitable ones.
Banks are justified in treating profitable and unprofitable customers differently because their primary goal is to generate profit and maintain financial stability. By focusing on profitable customers, banks can allocate resources more efficiently, ensuring that they meet their financial objectives. Additionally, this practice allows banks to provide better services and benefits to those who contribute more to their bottom line. However, it is important for banks to strike a balance and still offer basic services to unprofitable customers, to avoid negative social consequences and maintain a positive public image.

Learn more about account balances here:

https://brainly.com/question/29244571

#SPJ11

Answer:

TRUE

Explanation:

In economics, economies of scale refer to cost savings received by increasing output. Specifically, economies of scale exist if the average cost decreases as output increases.

Answer:

TRUE

Explanation:

In economics, economies of scale refer to cost savings received by increasing output. Specifically, economies of scale exist if the average cost decreases as output increases.

The assembly time for a product is uniformly distributed between 6 and 10 minutes. the probability of assembling the product in less than 6 minutes is 0. The correct answer is option b.

In probability theory, a uniform distribution is a continuous probability distribution where all values between a minimum and maximum value are equally likely. In this case, the assembly time for a product is uniformly distributed between 6 and 10 minutes.

The probability of assembling the product in less than 6 minutes is 0 because the minimum possible assembly time is 6 minutes. Since the assembly time is uniformly distributed between 6 and 10 minutes, the probability of any value less than 6 is 0.

To calculate the probability of an event in a continuous uniform distribution, we use the formula:

Probability of an event = (value of event - minimum value) / (maximum value - minimum value)

In this case, the minimum value is 6 and the maximum value is 10. Therefore, the probability of assembling the product in less than 6 minutes is:

Probability = (6 - 6) / (10 - 6) = 0 / 4 = 0

So, the probability of assembling the product in less than 6 minutes is 0.

The correct answer is option b.

To know more about probability theory refer to-

https://brainly.com/question/31469353

#SPJ11

Companies with extremely limited promotional budgets tend to concentrate on publicity (option b), as it is cost-effective and generates awareness.

In situations where a company has a very limited promotional budget, focusing on publicity becomes the most practical option. Publicity is cost-effective compared to other promotional mix elements such as advertising, personal selling, and distributor incentives.

It helps in generating awareness and reaching a broader audience through various media channels. Publicity may involve press releases, media coverage, and social media mentions, which generally require less financial investment compared to paid advertisements or direct sales promotions.

This allows companies with limited budgets to effectively promote their products and services while minimizing expenses. Thus, the correct choice is (b) publicity.

For more such questions on Companies, click on:

https://brainly.com/question/6528766

#SPJ11

Action 1: Reach out to nearby gophers - Contact gophers who live near the location of the open customer requests and offer them an incentive to take on additional assignments. This will require a database of nearby gophers and a system to offer incentives.

Action 2: Communicate with customers: - Notify customers who have open requests about the situation and offer them the option to reschedule or cancel their request without penalty. This will require a communication system that can reach all affected customers.

Action 3: Assign requests to available gophers - Use a system to automatically assign requests to gophers who are available and nearby. This will require a system that can prioritize requests based on location and availability.

Action 4: Partner with transportation companies - Partner with transportation companies to offer gophers a ride to their respective assignments. This will require a partnership agreement with transportation companies and a system to manage transportation requests.

Action 5: Expand the gopher network - Recruit new gophers in areas where there is high demand for the service. This will require a marketing and recruitment campaign to attract new gophers to the platform.

Noticed: The subways are down and half of our gophers are unable to get to their respective assignments.

ASAP: Immediate action is needed to fill the 65 open customer requests waiting to be filled.

to know more about Online marketplace  pls visit:

https://brainly.com/question/30163800

#SPJ11

The cost basis of a used machine is $77,655. Therefore, the correct option is C.

We are required to calculate the cost basis of a used machine with a purchase price of $34,175, an overhaul costing $8,011, installation costs of $6,285, and special acquisition fees of $29,184.

1. Add the purchase price to the overhaul cost:

$34,175 + $8,011 = $42,186

2. Add the installation costs:

$42,186 + $6,285 = $48,471

3. Add the special acquisition fees:

$48,471 + $29,184 = $77,655

Hence, the cost basis of the used machine would be $77,655 which corresponds to option C.

Note: The question is incomplete. The complete question probably is: A used machine with a purchase price of $34,175, requiring an overhaul costing $8,011, installation costs of $6,285, and special acquisition fees of $29,184, would have a cost basis of: A) $39,429 B) $48,446 C) $77,655 D) $122,625.

Learn more about Cost basis:

https://brainly.com/question/30051172

#SPJ11

The first year's depreciation for a sewage treatment plant is 3.64%. Therefore, the dollar amount of the first year's depreciation for $65,000 invested in a sewage treatment plant would be $2,366.

Sure, here are the answers:

a. Office furniture: According to Table 12-11, the first year's depreciation for office furniture is 7.27%. Therefore, the dollar amount of the first year's depreciation for $65,000 invested in office furniture would be $4,725.

b. Automobile: According to Table 12-12, the first year's depreciation for an automobile is 20%. Therefore, the dollar amount of the first year's depreciation for $65,000 invested in an automobile would be $13,000.

c. Electric and gas utility property: According to Table 12-11, the first year's depreciation for electric and gas utility property is 2.56%. Therefore, the dollar amount of the first year's depreciation for $65,000 invested in electric and gas utility property would be $1,664.

d. Sewage treatment plant: According to Table 12-11, the first year's depreciation for a sewage treatment plant is 3.64%. Therefore, the dollar amount of the first year's depreciation for $65,000 invested in a sewage treatment plant would be $2,366.

I hope that helps! Let me know if you have any further questions.

Learn more about treatment plant here

https://brainly.com/question/31158950

#SPJ11

To determine the first year's depreciation for each asset, we need to refer to the appropriate tables in the IRS tax code. The correct option is (a) office furniture.

a. Office furniture: According to Table 12-11, office furniture is classified as 7-year property. Using the MACRS 200% declining balance method, the first year's depreciation rate is 14.29%. Therefore, the first year's depreciation for $65,000 of office furniture is:

Depreciation = $65,000 x 14.29% = $9,297.50

b. Automobile: According to Table 12-11, automobiles are classified as 5-year property. Using the MACRS 200% declining balance method, the first year's depreciation rate is 20%. However, there is a limit on the amount of depreciation that can be taken in the first year. According to Table 12-12, the limit for an automobile placed in service in 2023 is $18,000. Therefore, the first year's depreciation for $65,000 of an automobile is: Depreciation = $18,000

c. Electric and gas utility property: According to Table 12-11, electric and gas utility property is classified as 15-year property. Using the MACRS straight-line method, the first year's depreciation rate is 6.67%. Therefore, the first year's depreciation for $65,000 of electric and gas utility property is: Depreciation = $65,000 x 6.67% = $4,345.50

d. Sewage treatment plant: According to Table 12-11, sewage treatment plants are classified as 20-year property. Using the MACRS straight-line method, the first year's depreciation rate is 5%. Therefore, the first year's depreciation for $65,000 of a sewage treatment plant is: Depreciation = $65,000 x 5% = $3,250

To learn more about  depreciation, visit here

https://brainly.com/question/30531944

#SPJ4

A decrease in common stock is reported in the financing section of the statement of cash flows.

A decrease in the common stock account indicates that a company has either repurchased shares or issued dividends to shareholders.

This activity is classified as a financing activity and is reported in the financing section of the statement of cash flows. This section of the statement provides information about the cash inflows and outflows related to long-term financing activities, including stock issuances, stock repurchases, and dividend payments.

Other items reported in this section include debt issuances and repayments, as well as changes in other long-term liabilities.

By analyzing the financing section of the statement of cash flows, investors can gain insights into a company's capital structure and its ability to fund growth initiatives.

For more such questions on stock, click on:

https://brainly.com/question/26128641

#SPJ11

The term used to refer to turnover in a firm's customer base is _____.

Answer: b) Churn

Churn is the percentage of customers who discontinue doing business with a company during a given time period. It is a key indicator for organisations to monitor and reduce in order to retain a steady client base and revenue.

Understanding your customer churn is critical for measuring the efficiency of your marketing initiatives and overall customer happiness. It is also easier and less expensive to keep existing consumers rather than acquire new ones. Because subscription business models are so prevalent, it's vital for many companies to understand where, how, and why their customers are leaving.

To calculate the proportion of revenue that has churned, take all of your monthly recurring revenue (MRR) at the start of the month and divide it by the monthly recurring revenue you lost that month — minus any upgrades or additional income from current customers. You don't want to include fresh sales in the month since you want to know how much total revenue you lost. Revenue gained from current clients is new revenue.

Learn more about Churn: https://brainly.com/question/31542911

#SPJ11

A. True.
Products that can be easily recycled are becoming increasingly popular among consumers who are becoming more environmentally conscious.

A. True.

Products that can be easily recycled are becoming increasingly popular among consumers who are becoming more environmentally conscious. These "content loaded products" (products that are made from recycled materials) create positive impressions as they demonstrate a company's commitment to sustainability and reducing their environmental impact.

Learn more about environmentally conscious here

https://brainly.com/question/10556164

#SPJ11

The correct answer is A,the data are time series because the data are measured over time at regular intervals.A cross-sectional study is a type of research design in which you collect data from many different individuals at a single point in time. In cross-sectional research, you observe variables without influencing them.

The data are cross-sectional because the number of cars sold by a dealership is measured at a single time instant (each month of 2015) and does not involve measuring the same dealership's sales over a period of time. "Random" is not applicable to this question as it refers to the method of selecting a sample in a study, rather than the nature of the data being collected.A cross-sectional study is a type of research design in which you collect data from many different individuals at a single point in time. In cross-sectional research, you observe variables without influencing them.Researchers in economics, psychology, medicine, epidemiology, and the other social sciences all make use of cross-sectional studies in their work. For example, epidemiologists who are interested in the current prevalence of a disease in a certain subset of the population might use a cross-sectional design to gather and analyze the relevant data.

Learn more about cross-sectional here:
https://brainly.com/question/15541891

#SPJ11

Using films of worker’s activities to identify areas for improvement, is the essential description of Frank and Lillian Gilbreth's work.

For more information on Frank and Lillian Gilbreth hypothesis kindly visit to

https://brainly.com/question/14333236

#SPJ1

If ABC Company raised capital by issuing bonds, it would appear in the cash flow statement under the financing activities section, and the cash flow would increase.

The cash flow statement is divided into three sections: operating activities, investing activities, and financing activities. When a company issues bonds to raise capital, it falls under financing activities.

This is because the company is obtaining funds from external sources (bondholders) to support its operations and growth. When bonds are issued, the company receives cash from the bondholders, which leads to an increase in cash flow.

In the financing activities section of the cash flow statement, the cash inflow from issuing bonds would be recorded as a positive amount, indicating an increase in cash flow for the company.

To know more about cash flow click on below link:

https://brainly.com/question/30736595#

#SPJ11

Nonstore retailing refers to the sale of products or services through channels other than physical stores. This type of retailing has become increasingly popular with the rise of e-commerce and the availability of online platforms. Nonstore retailing can take many forms, including online stores, catalogs, direct mail, and vending machines.

Vending machines are a common example of nonstore retailing. They are automated machines that dispense products such as snacks, drinks, and other consumer goods. Vending machines can be found in various locations, including schools, airports, and office buildings.

One of the benefits of nonstore retailing is convenience. Vending machines allow customers to purchase products without the need for human interaction, which can be helpful in situations where there are no physical stores nearby or during off-hours. Additionally, vending machines can be used to sell niche products that may not be available in traditional retail stores.

In conclusion, the vending machine from which you purchased a soda is an excellent example of nonstore retailing. It is an automated machine that allows customers to purchase products conveniently without the need for human interaction. Nonstore retailing has become an essential part of the retail landscape, providing consumers with more options and convenience than ever before.

Know more about Nonstore retailing here;

https://brainly.com/question/31541713

#SPJ11