Given that S is the central atom, write a Lewis structure of OSF4 in which the formal charges of all atoms are zero.

Answer:

Explanation: This is an example of a double displacement reaction. Here sodium carbonate is added to sodium chloride. The result is no visible reaction.

There is no effect of mixing the solids. Mixing solutions would have little effect unless they were at very high concentrations, then it is possible some sodium carbonate would precipitate due to the common ion effect.

Answer:

Compounds are substances composed of two or more elements chemically combined that can be separated into simpler substances only by chemical means. Water, for example, is a compound because pure water is composed of only H2O molecules.

Pls choose me as brainliest!

There are bubbles and the colour shifts.

A chemical reaction is defined as a process in which the chemical composition of a substance changes. A whole new chemical is created as a result of these reactions.

A chemical change would be the oxidation of iron to ferric oxide.

Here, iron that initially seems grey transforms to green before turning brownish red.

1. alteration in color

2. heat is gained or lost.

3.Gas evolution

4. precipitate formation these are some features of chemical reaction.

Therefore, when food that has been kept out of the refrigerator changes color and gas evolution occurs, there has been a chemical alteration.

To learn more about chemical reaction https://brainly.com/question/11231920

#SPJ4

The molecule O=C=S is linear and has a Lewis structure analogous to that of CO2. This molecule is polar molecule.

What are polar molecules?

Polar molecules are molecules that have two oppositely charged ends. Polar molecules exist as a result of differences in the electronegativities of the atoms of the elements found in the molecule.

With two electron domains around the central atom .the electron domain & molecular geometries are linear .sinces oxygen is more electronegative than sulphur.

The bond dipole symmetrically distributed around the carbon atom , are not identical and therefore,the bond dipole do not sum to zero.

Therefore, OCS molecule is a polar molecule not a non polar.

learn more about polar molecules:

https://brainly.com/question/24775418

#SPJ4

The equilibrium constant at a temperature of 25°C is Kp = 28.18. This value can be expressed to three significant digits as Kp = 28.2.

A state of balance between conflicting forces or influences is known as equilibrium. It is a principle that is applied in a variety of fields, including as physics, chemistry, and economics.

The following equation can be used to determine the equilibrium constant for the specified reaction:

Kp = [Cl₂]²[H₂O]² / [HCl]⁴[O₂]

The partial pressures of the gases can be used to determine Kp on the assumption that the gas is ideal.

Kp = (PCl₂)²(PH₂O)²/ (PHCl)⁴(PO₂)

Kp is easily calculable if the partial pressures of each gas are known. Finding the equilibrium constants at a given temperature is important because no pressures are provided in this scenario.

According to the information in the thermochemical table, Kp = 28.18 is the equilibrium constant at 25°C. 3 significant figures can be used to express this amount Kp = 28.2.

To learn more about equilibrium

brainly.com/question/18849238

#SPJ4

The efficiency of a machine is the ratio of the output work it performs to the input work required to operate it. This ratio is expressed as a percentage, and it tells you how much of the input work is converted into useful output work.

For example, if a machine requires 10 units of input work to perform 5 units of output work, its efficiency would be 50%. This means that 50% of the input work is converted into useful output work, while the remaining 50% is lost as waste heat, friction, or other forms of energy dissipation.

In general, the efficiency of a machine is determined by its design, as well as the materials and components used to construct it. Machines that are well-designed and constructed with high-quality materials will typically have higher efficiencies than those that are poorly designed or made with lower-quality materials.

It's also important to note that the efficiency of a machine can vary depending on the type and amount of work it is performing. For example, a machine may be more efficient at performing certain tasks than others, or it may become less efficient as it wears out or is subjected to heavy use.

The inhibitory effect of an uncompetitive inhibitor is greater at high [s] than at low [s] because kcat/kM = 8.5 x 107 (M.s)-1

Upland and lowland are conditional descriptions of a plain based on elevation above sea level. In studies of the ecology of freshwater rivers, habitats are classified as upland or lowland.

Uncompetitive inhibition is an example of a reversible inhibition.

At [S] > KM the effect of the inhibitor on reducing Vmax is apparent because as [S] increases, V approaches Vmax / α′

At [S] < KM the effect of the inhibitor is minimal because as [S] decreases, V approaches Vmax[S] / KM.

kcat = Vmax/[Etotal]

= ( 164*10-6 (mol/L)min-1 )/(1*10-9 mol/L)

= 1.64 x 10^5 min-1

kcat/kM = ( 164000 min-1 / 32*10-6 M

= 5125*106 (M.min)-1

= 8.5 x 107 (M.s)-1

learn more about uncompetitive inhibitor:

https://brainly.com/question/15080071

#SPJ4

The boiling requires overcoming air pressure with vapor pressure, the boiling temperature of water depends on your height from sea level. Additionally, although this tends to raise the boiling point, it relies on the presence of contaminants in the water.

However, water boils at sea level at a temperature of 100 degrees Celsius. It serves as a definition. Because that is what the Celsius system is founded on, that temperature was picked. Actually, the temperature that pure liquid water at sea level cannot get above is 100 degrees Celsius, which is the most that it can be heated to before plateauing. The "boiling point" measures the actual object in question.

If you gauge the temperature from the first sign of boiling, it may occur at a little lower levels. Whisps of vapor may be seen around 90–95 degrees, but if you are at sea level with a reliable thermometer and clear water, the temperature should increase to 100 and remain there until the water starts to boil.

To learn more about boiling temperature, refer to:

https://brainly.com/question/13633272

The percent compositions for the naturally occurring isotopes of lithium are as follows: lithium-6 (7.5%), lithium-7 (92.5%), and lithium-8 (0.01%). The average atomic mass of lithium is calculated by taking into account the masses of all of its naturally occurring isotopes and the percent abundance of each isotope. When we look at the average atomic mass of lithium and compare it to the mass numbers of its isotopes, we can see that the average atomic mass is not equal to any of the individual isotope mass numbers. This is because the average atomic mass is a weighted average that takes into account the percent abundance of each isotope. Therefore, the average atomic mass of lithium is not the same as the mass number of any of its individual isotopes.

Answer

All of the above are the routes of chemical exposure to the body.

There are 3 routes  of chemical  exposure and pollutants:

inhaling

absorption

ingesting

One is  exposed to chemicals and pollutants when one  inhale (breathe in).  This number can be much higher for infants and children. The chemicals and pollutants you inhale can end up in your lungs and blood stream.

Absorption

One can be exposed to chemicals and pollutants by coming into contact with them through your skin and eyes. These organs can be more sensitive to chemicals and may react more quickly than the rest of your body.

Ingesting

One is exposed to chemicals and pollutants when you eat and drink. Chemicals and pollutants are found in both our food and water sources.

Learn more about chemical exposure,here:

https://brainly.com/question/29797570

#SPJ2

Answer:     Fe + H2SO4 = Fe2(SO4)3 + H2 (Note: Dilute H2SO4)

Explanation:

it comes easy to me

Option E is Answer. The pH value of the buffer is 9.08

The pH of a solution: It is a measure of hydrogen ion concentration, which in turn is a measure of its own acidity. Pure water dissociates slightly into equal concentrations of hydrogen and hydroxyl (OH−) ions.

The pH is then calculated using the expression:

pH = - log [OH-].-------------(1)

the pH of acidic buffer =pka+log[ acid/salt]

the pH of basic buffer =pkb+log[ base/salt]

Given that Kb=1.8x10^-5

                 base=0.27M

                 salt=0.18M

first, we have to calculate the value of kb,

pkb=−log[1.8×10 ^−5]

pkb=4.74

The pH of buffer=pkb+log[base/salt]-------------(2)

We find out the value of kb and now substitute it in equation(2)

pOH=4.74+log[ 0.27/0.18]

​=4.74−0.176=4.92

pH=14−4.92=9.08

To know more about the pH of solution:

https://brainly.com/question/26424076

#SPJ4

The change in enthalpy of vaporization is 27.4 kJ/mol that can be calculated using Clausius-Clapeyron relation.

The Clausius-Clapeyron relation is used to characterize a discontinuous phase transition between two phases of the same constituent such as ice. The plot is drawn between 1/T vs ln P.

T1= 25+273=298 K

P1=363 Torr

T2= 46.3+273 = 319.3 K

P2= 760 Torr which is the atmospheric pressure.

By using the Clausius-Clapeyron equation,

ln(P2/P1)=ΔH/R[1/T1-1/T2]

ln (760/363)=ΔH/8.314x10^-3[1/298-1/319.3]

ΔH=27.44 kJ/mol

Therefore, the change in enthalpy of vaporization is 27.4 kJ/mol.

To learn more about enthalpy check the link below:

https://brainly.com/question/14047927

#SPJ4

The strength of attraction of the water molecules to each other is the hydrogen bonding.

The slowest evaporating liquid might be the water. Water 's hydrogen bonding, being the most powerful sort of intermolecular force, might be the toughest to triumph over to break out into the fueloline kingdom and could bring about the longest time. Hydrogen bonds do not form in all molecules because hydrogen can only form these bonds with highly electronegative atoms. It is a weak type of force that happens when a hydrogen atom is bonded to an atom which has a high electronegativity.

To learn more about hydrogen bonding check the link below:

https://brainly.com/question/1420470

#SPJ4

If you have 25 ml of a buffer solution at an initial ph, and it takes 13 ml of 0.1m hcl to change the buffer to ph -1, 130 ml/M is the buffer capacity for this solution.

The buffer capacity of a solution is a measure of its ability to resist changes in pH when small amounts of acid or base are added. It is defined as the amount of acid or base that must be added to the solution to change its pH by one unit.

To find the buffer capacity of a solution, we need to know the initial pH of the solution and the amount of acid or base required to change its pH by one unit.

In this case, we are given that the initial pH of the buffer solution is some value, and it takes 13 mL of 0.1 M HCl to change the pH by 1 unit. We can use this information to calculate the buffer capacity as follows:

Buffer capacity = amount of acid or base required to change pH by 1 unit / concentration of acid or base

= 13 mL / 0.1 M

= 130 mL/M

Therefore, the buffer capacity of this solution is 130 mL/M.

To know more about buffer capacity please refer: https://brainly.com/question/24188850

#SPJ4

Two different things you could do to increase the yield of ester beyond 70% are increase ethanol and butyric acid or enzymes involved in the reaction .

Define esterification.

The general term for a chemical reaction in which two reactants (usually an alcohol and an acid) combine to create an ester as the end product is "esterification." Esters are frequently found in organic chemistry and biological materials, and they frequently have a distinctive, fruity scent.

By increasing one of the reactants' concentration, the yield of ester can be increased (either the alcohol or the carboxylic acid). A surplus of one reactant will cause the reaction to move to the right in accordance with Le Chatelier's Principle, increasing the generation of ester and, consequently, the yield of ester.

To know more about esters use link below:

https://brainly.com/question/28118164

#SPJ1

The symbol for atomic sulfur and molecular sulfur is different. The symbol for atomic sulfur is S and the symbol for molecule sulfur is S₈.

The symbol of an element or atom is just the representation with few alphabets with no digit.

example

Symbol for Oxygen is O

Symbol for Nitrogen is N

Symbol for sulfur is S

However in case of molecule we know that molecule is the combination of atoms. In sulfur molecule 8 sulfur atom is present so we represent the molecule as  S₈.

Thus the elemental form of sulfur is an eight atomic molecule

The forms is represented as S₈.

Learn more about atom and molecules:

https://brainly.com/question/24372852

#SPJ4

There are several activities that a student can perform to show the formation of soil through chemical processes. Here are two examples:

Soil pH experiment: In this activity, the student can measure the pH of soil samples collected from different locations or layers. The pH of the soil is an indicator of the soil's acidity or alkalinity, which is influenced by chemical processes such as the breakdown of organic matter and the weathering of minerals. By comparing the pH of different soil samples, the student can observe how chemical processes can affect the properties of soil.

Soil horizons experiment: In this activity, the student can create a soil profile by layering soil samples collected from different depths in a jar or container. The student can then observe the different layers, or horizons, that form in the soil profile over time. These horizons are formed through a variety of chemical processes, including the weathering of minerals, the breakdown of organic matter, and the leaching of nutrients. By observing these horizons, the student can see how chemical processes contribute to the formation and development of soil.

It's important to note that these are just a couple of examples, and there are many other activities that a student can perform to demonstrate the formation of soil through chemical processes.

To know more about soil formation visit :

https://brainly.com/question/545586?referrer=searchResults

#SPJ4

There are several activities that a student can perform to show the formation of soil through chemical processes. Here are two examples:

Soil pH experiment: In this activity, the student can measure the pH of soil samples collected from different locations or layers. The pH of the soil is an indicator of the soil's acidity or alkalinity, which is influenced by chemical processes such as the breakdown of organic matter and the weathering of minerals. By comparing the pH of different soil samples, the student can observe how chemical processes can affect the properties of soil.

Soil horizons experiment: In this activity, the student can create a soil profile by layering soil samples collected from different depths in a jar or container. The student can then observe the different layers, or horizons, that form in the soil profile over time. These horizons are formed through a variety of chemical processes, including the weathering of minerals, the breakdown of organic matter, and the leaching of nutrients. By observing these horizons, the student can see how chemical processes contribute to the formation and development of soil.

It's important to note that these are just a couple of examples, and there are many other activities that a student can perform to demonstrate the formation of soil through chemical processes.

To know more about soil formation visit :

brainly.com/question/545586?referrer=searchResults

#SPJ4

Answer: Al:Al2O3 = 3: 1

Explanation:

the answer is 1

People argue how to take into account for varied roughness conditions in different regions of natural and restored waterways since they are typically constructed of compound channels rather than simple cross-sectional areas like rectangles, trapezoids, triangles, or simple curved forms.

What is a compound channel ?

A "compound" channel consists of a main channel that can handle regular flows and a flood plain that is submerged during heavy flows on one or both sides.

According to several researchers and practitioners, non-compound channels with channel beds and sides constructed of different materials or main channels with unusually shaped geometry and varying roughness should be the key applications for these composite roughness coefficient approaches. Furthermore, they propose the use of a composite roughness for compound channels when there are negligible roughness variations between the main channel and flood plains. These engineers recommend that the segmented conveyance approach instead be used in the majority of compound channel applications.

To learn more about flood plain click here:

https://brainly.com/question/13083329

#SPJ4

When a solution of NiSO4 is exposed to a 0.2 faraday electrical charge, b. 5.87 g of nickel, Ni is deposited.

The Balanced equation is :

Ni²⁺ + 2e —> Ni

To Determine the mass of the Ni when there is 0.2 farad.

According to the balanced equation,

The molar mass of nickel is 1× 59 [tex]gmol^{-1}[/tex]

The number of farad =2

(Since, In the balanced equation nickel losses 2 electron. )

2 farad = 59  [tex]gmol^{-1}[/tex] of nickel

0.2 farad = ?

⇒[tex]\frac{(59)(0.2)}{2}[/tex]

⇒5.87  [tex]gmol^{-1}[/tex]  ≈ 5.9  [tex]gmol^{-1}[/tex]

Nickel is deposited onto a metal component by the technique of nickel electroplating. Before plating can start, parts must be clean and free of debris, corrosion, and flaws. A mixture of heat treating, cleaning, masking, pickling, and etching may be used to prepare and protect the part before plating.

To know more about Nickel Electroplating refer here

https://brainly.com/question/23612460#

#SPJ4

The statement "Even though the full oxidation of glucose is exergonic, some of the reactions in glycolysis are endergonic" is a TRUE statement.

Glycolysis is the metabolic pathway of reactions that convert glucose into pyruvate (in the presence of oxygen) or lactate (in the absence of oxygen). There are ten sequences of reactions in it catalyzed by enzymes.

The overall reactions of glycolysis are exergonic, which means energy is released into its surroundings, However, some of the reactions within glycolysis absorb energy instead of releasing energy, making them endergonic reactions. One of them is the second reaction in glycolysis, where isomerase catalyzes the isomerization of G-6-P to F-6-P.

Learn more about glycolysis at https://brainly.com/question/737320

#SPJ4

There are 3 faradays of electricity that would be required to produce a mole of metallic aluminum in such a process.

Aluminum is a chemical element with the symbol Al and atomic number 13. The density of aluminum is lower than other common metals, about one-third that of steel. It has a high affinity for oxygen and forms a protective oxide layer on the surface when exposed to air.

One of several chemical elements that are usually lustrous solids that conduct heat and electricity and can be formed into plates and the like. The American Chemical Society officially adopted aluminum in 1925, but in 1990 the International Union of Pure and Applied Chemistry accepted aluminum as an international standard. And we end up with English-speaking North Americans using aluminum today.

Learn more about Electrolysis here:- https://brainly.com/question/25712870

#SPJ4

The ph of a solution with [h3o+] = 3.0 × 10-3 m is 2.52.

A solution's acidity can be determined by looking at its pH, which is a measurement of hydrogen ion concentration. Pure water slightly separates into ions with roughly equal amounts of hydrogen and hydroxyl (OH) ions. [H+] is 107 for a neutral solution, or pH = 7.

You need to know the hydronium ion concentration in moles per litre to determine the pH of an aqueous solution (molarity). The equation pH = - log [H3O+] is then used to determine the pH.

You can alternatively write the pH Formula as. l o g [H +] = p H Problems With the pH Formula. Problem 1: Determine the pH of the solution in which there are 8.0 10-8M hydronium ions.

Learn more about ph:

https://brainly.com/question/26424076

#SPJ4

The complete question is ''What is the pH of a solution with [ H3O+] = 3.0 × 10-3 M?

A) 3.0 × 10-3

B) 2.52

C) 3.0

D) -2.52

E) 9.0

B) 2.52

The pH of 2 solutions, a 0.1M HCl solution and a 0.1M acetic acid solution. The pH of the HCl is lower and the [H30+] is higher is true. Therefore, option 3 is correct.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

The pH scale, which previously stood for "potential of hydrogen," is used to describe how acidic or basic an aqueous solution is. The pH values of acidic solutions are typically lower than those of basic or alkaline solutions.

Thus, option 3 is correct.

To learn more about pH, follow the link;

https://brainly.com/question/491373

#SPJ1

gas is placed in a balloon with a volume of 3.0 l at 35oc and 800 torr. what would be the new volume for the gas if placed under stp The new volume will be "13.0 L" when the balloon is inflated to less than 800 mmHg.

Ideal gas formula

The answer to the query is

P1 = 1 atm for pressure

P₂ = 1.053 atm

T1 = 273.15 K for the temperature.

T₂ = 373.15 K

V1 = 10.0 L of volume

The ideal gas equation can be used to:

⇒ PV = nRT

or,

Then,

The new book will be:

→ V₂ =

By changing the values above,

=

= 13.0 L

Consequently, the strategy described above is appropriate.

Learn more about volume here:

https://brainly.com/question/13338592

#SPJ4

1-pentanethiol has a higher molar mass.

What is Boiling Point?

The boiling point of a liquid is the temperature at which its vapour pressure equals that of the surrounding air. The liquid turns to a vapour at this temperature.

The boiling point of the liquid is influenced by the atmospheric pressure. When a liquid is at high pressure, its boiling point is higher than when it is at atmospheric pressure. Different liquids have variable boiling points at a certain pressure. The standard boiling point of a liquid was established by IUPAC in 1982 as the temperature at which a liquid starts to boil at a pressure of one bar.

Learn more about Boiling Point from given link

https://brainly.com/question/40140

#SPJ1

100ml of 0.400 m AgNO3 and 90.0 ml of 0.250 m CaCl2 would combine to create 0.0225 moles of AgCl(s).

AgNO3 + CaCl2 -> AgCl + Ca(NO3)2 is the result of the given reaction

One mole of AgNO3 interacts with one mole of CaCl2 to produce one mole of AgCl in this reaction.

Given that AgNO3 (v1) has a volume of= 100 ml

Volume of CaCl2(v2) = 90ml

molarity of AgNO3 (m1) = 0.400M

Molarity of CaCl2 (m2) = 0.250M

Moles of AgNO3 formed: v1 x m1/1L = 0.1 x 0.4/1 = 0.04

moles of CaCl2 formed: v2 x m2/1L = 0.09 x 0.25/1L = 0.0225

Since AgNO3 exceeds 0.0225 moles of AgCl, CaCl2 is the limiting reactant in this limiting reactant problem.

Hence the number of moles of AgCl formed = 0.0225

To learn more about molarity click here https://brainly.com/question/8732513

#SPJ4

The reaction that shows the combustion of methane is given by;

[tex]CH_{4} (g) + 2O_{2} (g) --------- > CO_{2}(g) + 2H_{2}O(g)[/tex]

We know that a combustion reaction is the kind of reaction that occurs when a substance is burnt in oxygen. We know that the burning of a substance on oxygen would lead to the oxidation of the product.

In the case of an organic compound like methane, when the substance has been burnt in oxygen, the products of the reaction are now carbon dioxide and water. This are the oxidation products of the combustion.

Learn more about combustion reaction:https://brainly.com/question/3588292

#SPJ1

The volume of 0.2500 m strontium hydroxide is required to completely react with 75.00 ml of 0.07942m hcl is 11.91 mL.

Calculation:-

Sr(OH)2 + 2 HCl => SrCl2 + 2 H2O

Moles of HCl = volume x concentration of HCl

= 75.00/1000 x 0.07942 = 0.0059565 mol

Moles of Sr(OH)2 = 1/2 x moles of HCl

= 1/2 x 0.0059565 = 0.00297825 mol

Volume of Sr(OH)2 = moles/concentration of Sr(OH)2

= 0.00297825/0.2500

= 0.01191 L = 11.91 mL

The health risks associated with radioactive strontium are very low at concentrations commonly found in the environment. Higher-than-normal levels of radioactive strontium lower blood cell concentrations and increase the risk of certain types of cancer. There is a possibility. Strontium is a soft silvery-yellow alkaline earth metal.

Learn more about Strontium hydroxide here:- https://brainly.com/question/17151711

#SPJ4