Free-body diagrams for four situations are shown below. For each situation, determine the net force acting upon the object. Your answer must include both the magnitude and the direction of the net force vector. You should have ​four (4) total responses to this question (labeled A, B, C, and D).

According to the given statement Therefore, as the wavelength of a wave decreased, its frequency increased.

The colour of light is defined by its wavelength, and the frequency of sound is controlled by its wavelength. The visual spectrum of light has wavelengths between about 700 nm (red) to 400 nm (violet). The span of acoustic signal frequencies is roughly 17 mm to 17 m.

By measuring the distance between any two identical locations on adjacent waves, the wavelength can always be found. When determining the wavelength of a longitudinal wave, the distance from one compression to the next or from one rarefaction to the next is measured.

To  know more about Wavelength visit:

https://brainly.com/question/13533093

#SPJ13

Impulse  = change in momentum = 0.045 * 36 = 1.62 kg m/sec and Average Force = Impulse / time  = 1.62 / 3.9 x 10^-3    = 415.3 Newton

Impulse forces are those that have a relatively brief duration of action. The term "impulse" refers to the result of the impulsive force and the time at which it acts. I = F dt = dM is the formula for the impulse, which is the change in momentum brought on by the impulsive force.

The momentum of an object will change when a force acts for a predetermined period of time. In other words, an uneven force always accelerates an object, either by making it go faster or slower. When a force opposes an object's motion, the object slows down. When a force is applied in the same direction as an object's motion, the object is accelerated by the force. In either case, a force will alter an object's velocity.

Learn more about Impulse here:

https://brainly.com/question/1219455

#SPJ4

The frictional force acting on the 17 kg mass is 111.62 N.

Friction is the force that resists motion when the surface of one object comes in contact with the surface of another.

This type of force resist the motion of two surfaces that are in contact.

Mathematically, the formula for frictional force is given as;

Ff = µsN

where;

The frictional force acting on the mass is calculated as follows;

Ff =  µsN

Ff =  µsmg

Ff = (0.67) x (17 kg) x (9.8 m/s²)

Ff = 111.62 N

Thus, the frictional force acting on the mass depends on the mass and acceleration due to gravity on the mass.

Learn more about frictional force here: https://brainly.com/question/4618599

#SPJ1

When the circuit's current doubles, the power lost in the circuit is given by, Beginning with "begin aligned" and ending with "end aligned," P =I 0 2 R =(2 I) 2 R =4 I 2 R. The power dissipated by the circuit is quadrupled if the current in the circuit is twice.

The idea of a resistance's power loss at constant voltage. The square of the potential across the resistor over its resistance, then, represents the power dissipated or the bubble that generated at constant volume at constant voltage. From this, we might conclude that power and resistance are inversely related.

Starting with "begin aligned" and continuing with "end aligned," P =I 0 2 R =(2 I) 2 R =4 I 2 R gives the power lost in the circuit when the circuit's current doubles. If the circuit's current is doubled, the power it dissipates is multiplied by four.

Now that we know this, we may write the original power P equals are over our buddies and the power BI prime over it. We can express the power P prime equals P times are greater than our prime from this. The resistance is prime is off by double the initial help in the problem now.

As a result, the power Well will decrease by a factor of 2, and the new power P prime will therefore be P over two.

To know more about circuit click on the link:

https://brainly.com/question/12608516

#SPJ4

The current flow in the circuit is 0.77 A.

The current flow in the circuit is the rate at which electron flows in the circuit at a given period of time.

Apply the flowing Ohm's law to determine the current flow in the circuit.

I = V/(R + r)

where;

I = (1.54) / (1.9 + 0.1)

I = 0.77 A

Thus, the current flow in the circuit is determined by applying Ohm's law equation.

Learn more about current in circuit here: https://brainly.com/question/18108586

#SPJ1

Explanation:

I think it's the last option

The gravitational acceleration on the asteroid is 0.195 m/s².

Gravitational acceleration has an important role in uniform motion. Uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration (gravitational acceleration), t is time and s is displacement.

From the question above, we know that

h = 100 m

vo = 5 m/s

vt = 8 m/s

By substituting the given parameters, we get

vt² = vo² + 2a . s

vt² = vo² + 2g . h

8² = 5² + 2.g . 100

64 = 25 + 200g

g = 0.195 m/s²

Find more on gravitational acceleration at: https://brainly.com/question/19050897

#SPJ4

Planetary motion can be explained using epicycles and deferent. When a planet is nearest to Earth, it shines brighter than when it is farther away. The velocity of planets is uniform and they orbit in a circle.

It wasn't always understood that Earth and other planets revolved around the Sun. The Earth is the solar system's center according to the geocentric theory. The ancient Roman and Egyptian astronomer and mathematician Claudius Ptolemy described one of the geocentric conceptions of the solar system. The planets and Sun have circular orbits around the Earth in Ptolemy's geocentric model of the solar system.

Ptolemy was mistaken regarding the shape or course of planetary orbits as well as the fact that Earth is at the center of the solar system. Astronomers and Ptolemy's observations from that era had a flaw and were inconsistent. The courses of the planets in the sky seemed to be broken by epicycles.

Learn more about epicycles here:

https://brainly.com/question/13323459

#SPJ4

If the car b travels a distance d before stopping, the car a travelled a distance of 4D.

The third equation of motion can be used to calculate the distance how far the cars drove before coming to a stop:

Vf2 - Vi2 = 2as

(Vf2 - Vi2)/2a = s

where,

s is the distance covered.

Final Speed = 0 m/s for Vf

Initial Speed = Vi

an is the deceleration rate.

We start by thinking about Car B and giving it a subscript 2:

Vf₂ = 0 m/s (As, automobile finally stops) (As, car finally stops)

s₂ = D

a₂ = - a (due to slowdown) (due to deceleration)

D = (0² - Vi₂²) /(-2a) (-2a)

the equation D = Vi22/2a (1)

We now take Car A into consideration and give it a subscript 1:

Vf₁ = 0 m/s (As, automobile finally stops) (As, car finally stops)

s₁ = ?

a₁ = - a (due to slowdown) (due to deceleration)

Vi₁ = 2 Vi₂ (Since, car A was previously moving at twice speed of car B) (Since, car A was initially traveling at twice speed of car B)

s₁ = (0² - Vi₁²) /(-2a) (-2a)

s₁ = (2Vi₂)²/2a

s₁ = 4 (Vi₂²/2a)

Using formula (1), we arrive at:

s₁ = 4D.

To know more about distance click on the link:

https://brainly.com/question/989117

#SPJ4

The direction of the net velocity of the car is 15 m/s due west.

The change in velocity of an object is the rate at which the velocity of the object changes with time.

The change in the velocity of the car is calculated as follows;

Δv = vf - vi

where;

The given parameters;

Δv = 5 m/s - 20 m/s

Δv =  - 15 m/s

Thus, the direction of the net velocity of the car will be due west.

Learn more about change in velocity here: https://brainly.com/question/25749514

#SPJ1

Answer:

Choice d  
0 acceleration and velocity of 6 m/s

Explanation:

The smart way to tackle questions like these is by POE or Process of Elimination.

We can easily eliminate choices a, b and c since velocity is definitely not 0

So choice (d)

If we look at the graph we see that between 6s and 8s the graph is flat at a velocity value of 6 m/s. So the answer should be velocity of 6 m/s and since there is no increase in velocity, the acceleration is also 0

However, this can also be proved mathematically
Acceleration = change in velocity/change in time
                     =  Δv/Δt

Δv = 6 - 6 = 0
The velocity is 6 m/s at 8 seconds and also 6 m/s at 6 seconds
Δt = 8 - 6 =2

Acceleration = 0/2 = 0 m/s²

Hence choice d

The kind of finger print that could be used in this case is the latent finger print.

The term finger print refers to a unique pattern that could be obtained from the fingers of an individual. The use of the finger prints have been very helpful in the science of forensics as many complex crimes have been solved by the use of this method.

The latent finger prints are the kind of finger prints that are not readily visible thus they could be used when we are dealing with very tough crimes.

Learn more about finger prints: https://brainly.com/question/943817

#SPJ1

Missing parts;

You’ve searched an area for fingerprints but haven’t found any in your initial visual examination of an area. If you are still curious if there are fingerprints, what would you need to start looking for?

Plastic fingerprints

Latent fingerprints

Visible fingerprints

Abbil fingerprints

The speed of the object base on its revolution is 40π km/min and the acceleration is zero.

The revolution number of the tire can be calculated by using the circular motion. The revolution number is represented by n. The number of revolutions in a circular motion should follow

n = s / (2πR)

where n is total revolution, s is total distance and R is the radius of circular object.

From the question above, the given parameters are

n = 1

t = 1 min

R = 20 km

By using the given equation, we can calculate the number of total distance

n = s / (2π . R)

1 = s / (2π . 20km)

s = 40π km

Hence, in one minute, the speed of object is

v = s / t

v = 40π / 1

v = 40π km/min

The acceleration is zero because the object moves at a constant speed.

Find more on revolution at: https://brainly.com/question/16533738

#SPJ4

The reason for the continued pedaling of the bicycle is to be able to overcome the forces of resistance and friction.

According to the Newton first law, an object would remain at rest or continue in a state of uniform motion unless is acted upon by an external force. The external force is thus the reason for motion.

We know that a bicycle moves along a straight line. If we are to follow what is said by the Newton's law then we would know that the bicycle should just continue to move once it has started moving. There would thus be no need for the bicycle to be pedaled since it s already moving along a straight line.

But we have to consider the fact that there is friction and air resistance that tends to prevent the motion of the bicycle along the straight line and this is why we must have to keep pedaling the bicycle.

Learn more about Newton law:https://brainly.com/question/15280051

#SPJ1

For the block to just start moving the horizontal force must equal the static friction.

F⇔ ↑N↓mg

N = mg

F = [tex]m_{s} n[/tex]

=  [tex]m_{s} mg[/tex]

Frictional forces act parallel to the surface. The frictional force is the force that resists the movement of an object in contact with the surface and acts parallel to the surface with which the object is in contact. When one body moves relative to another, a constant force called friction force begins to act on the sliding surface in the opposite direction of the movement. A moving object has a constant frictional force.

The magnitude of static friction is equal to the magnitude of the applied force. The supporting force F must be greater than the frictional force. The underlying object that requires less force to move is the pencil. Friction: Friction is defined as the force that opposes the motion of objects on contacting surfaces. On the other hand, if you move a large object, it becomes difficult for friction to work.

Learn more about Horizontal force here:-https://brainly.com/question/13697361

#SPJ4

All falling objects experience a downward acceleration equal to the force of gravity.

He jumps 155.96 meters from the ground.

A BASE jumper jumps from rest and is in free fall for 40.0 m,

s= 1/2 g t^2

t^2 = 2* 40/9.2

t= 2.95s

v= at = 9.2 * 2.95 =26.68 m/s

u= 26.68 when  he opens his parachute and slows down at a rate of 3.00 m/s².

v= 4m/s

2as = v^2 -u^2

s= (4^2 - 2.68^2)/2*9.2

s =115.96 m

total distance = 115.96+ 40 = 155.96 m

He jumps 155.96 meters from the ground.

To learn more about : Free Fall

Ref : https://brainly.com/question/12167131

#SPJ13

Newton's Third Law states that " when a body A exerts a force on body B(action), then body B exerts a force of equal magnitude but opposite in direction on body A(reaction)". Because these 2 forces act on different bodies, they are not canceled out and movement of a body can take place.

Movement is possible despite the existence of Newton's third law of motion because the equal in magnitude opposite in direction forces mentioned in the question, do not act on the same body. The two forces (action and reaction) of equal magnitude and opposite direction act on different systems. Hence these forces do not cancel each other out and movement takes place.

For example, consider a swimmer who reaches the edge of a pool. He pushes the pool wall with his feet to move forward into the water, in a direction opposite to the direction in which his feet exert the push on the pool wall. The push exerted by the swimmer on the wall is the action. The pool wall in turn exerts a reaction force of equal magnitude on the swimmer( i.e. in a direction opposite to the direction of the action force).

We see how the action and reaction forces do not act on the same bodies and hence do not get canceled out. Thus movement takes place ( in this swimmer moves in a direction opposite to his push).

more about Newton's Laws of motion

brainly.com/question/13447525

#SPJ4

Answer: the tension in the upper string will be larger than the tension in the lower string because of the weight of the stone. So, the upper string will break first.

Explaination:

Step 1. Newton’s second law

According to Newton’s second law, the value of the force can be obtained by examining the value of the object’s acceleration and the mass. Its value is altered linearly to the value of the object’s acceleration.

Step 2. Draw a free-body diagram

Here,  is the tension force in the string,  is the mass of the object,  is the gravitational force, and  is the applied force.

Step 3. Application of Newton’s second law

When given a sharp pull, there is a sudden application of force. When a large, sudden force is applied to the bottom of the string, the bottom string will have a large tension. Because of the stone's inertia, the upper string does not experience this large force, and therefore, the bottom string breaks.

If a slow and steady pull is applied, the tension in the bottom string increases. The stone is in equilibrium until the string breaks.

The block will be in equilibrium as long as T = F + mg

Thus, the tension in the upper string will be larger than the tension in the lower string because of the weight of the stone. So, the upper string will break first.

The lorentz Transformation eq enables us to transform velocity from one frame of reference to another, in relative motion with respect to it.

Let S and S' be two inertial frames in relative motion so that S; moves with uniform velocity v to the right. alog the X axis Relative to S

Let u and u' be the velocities of a particle measurd in inertial frames S and S'

so u'=u-v/(1-uv/c^2)

as u=v=c so

u'=u-v

u'=0.500-0.400

u'=0.100c

The heat supplied to increase the temperature of the substance is used up to transform the state of matter of that substance. Hence the temperature of the substance stays constant until the phase transition completes.

In chemistry, phase transitions or phase changes are the physical processes of transition between a state of a medium of a substance. This term is used to refer to changes in the basic states of matter such as solid, liquid, and gas.

When a substance is heated or cooled and approaches a temperature corresponding to one of its phase transitions. Further gain or loss of heat results in diminishing or enhancing intermolecular attractions, instead of changing the molecular kinetic energies.

While a substance is undergoing a change in state which is a phase transition, its temperature remains constant. The horizontal lines on the graph represent the transition between the states of the substances X and substances Y.

When adding heat leads to the temperature of a substance being increased as the kinetic energy of the molecules of the substance increases. The conduction of heat occurs when these molecules start vibrating with high energy, Hence the heat transfer from one molecule to another.

Learn more about a phase transition, here:

https://brainly.com/question/3255181

#SPJ1

The greatest static resistance between the upper and lower block is f1max = f 1max = s m 1g = 0.6×2×10 = 12N.

According to Newton's second law of motion, an object's net force must equal the sum of its mass and the acceleration it experiences. In the direction of the net force is where acceleration is moving.

The force of action and reaction between two bodies is equal in magnitude but opposite in direction, according to Newton's third law of motion. The highest frictional force that prevents slippage on a surface is known as the limiting friction force.

The highest static resistance between the lower block and the ground is

f2max

​ =μ s (m 1 +m 2 )g=0.6(2+2)10

=24N

Assumedly, both blocks move to the right at the same speed.

Consequently, (m 1 + m 2 )a = T- μk (m1 + m2)g

or 4a = T - 0.4(2+2)10

or a = T-16 / 4

for upper block, f1 = 2a = T - 16 / 2

For just sliding, f1 = f1max

or T - 16 / 2 = 12

or T - 16 = 24 => T = 40N

The complete question is:

You are lowering two boxes, one on top of the other, down the ramp by pulling on a rope parallel to the surface of the ramp. Both boxes move together at a constant speed of 15.0 cm/s. The coefficient of kinetic friction between the ramp and the lower box is 0.441, and the coefficient of static friction between the two boxes is 0.834. (a) What force do you need to exert to accomplish this? (b) What are the magnitude and direction of the friction force on the upper box?

To know more about static click on the link:

https://brainly.com/question/24160155

#SPJ4

Because the single bulb has a greater current, it is brighter. Less current is used with the second bulb since the current is split equally between the two bulbs.

The voltage drop across each bulb is 6.0 V when the light bulbs are linked in parallel, and they all glow as the current passing through them combines to generate the current flowing through the battery. Each component in a series circuit needs to be operational for the circuit to be complete.

Energy from the battery is transferred to the circuit's components by an electric current. Nothing in this procedure "uses up" any current. Negatively charged electrons that are constantly present in the circuit's wires and other components make up the majority of the moving charged particles.

Learn more about Circuit :

https://brainly.com/question/23804435

#SPJ4

Answer:

In physics, interference is a phenomenon in which two waves combine by adding their displacement together at every single point in space and time, to form a resultant wave of greater, lower, or the same amplitude.

Explanation:

effects

chemistry

atom

effects -Constructive interference leads to an increase in the amplitude of the sum wave, while destructive interference can lead to the total cancellation of the contributing waves.

chemistry -An interference is a substance, other than the assayed material, that can be measured by the chosen analytical method or that can prevent the assayed material from being measured. Interferences cause erroneous analytical results

atom-When those two electrons come together and they are in phase with each other, constructive interference occurs. They won't overlap completely; these are atoms and they take up space. However, they will be able to sit pretty close to each other, sort of smushing their electrons together.

Net ebony x-axis. ∅ ≈ 2° west of north.

= Rx = 5+ 7 cos 20° - 12

= -0.42 mi

Now, -axis  y axis

Ry = 7 Sin 20° +15 - 5

= 12.39 mi

= [tex]\sqrt{Rx^{2} + R}y^{2}[/tex] = [tex]\sqrt{(0.42)^{2} + (12.39)^{2} }[/tex]

IRI = 12.40 mi

Its direction:

tan ∅ = Rx/Ry west of North Ry  

∅ = [tex]tan^{-1}[/tex](0.42/12.39)

∅ = 1.94° west of north

∅ ≈ 2° west of north.

In the graphical method of adding vectors A and B, the vectors are drawn on the graph and added from head to tail. The resulting vector R is defined as A + B = R. The magnitude and direction of R are determined using a ruler and protractor, respectively. Draw the vectors so that their starting points coincide. Then draw a line to make a perfect parallelogram.

The diagonal from the starting point of the parallelogram to the opposite vertex is the result. GRI allows users to graphically display the detailed results of technical and economic analysis of a project. Hybrid2 uses two types of simulation models. One is for long-term performance prediction called the logistic model.

Learn more about The resultant vector here:-https://brainly.com/question/11823989

#SPJ1

A series RC circuit that receives its power from a DC source will experience transient phenomena when the circuit closes.

Therefore, it follows that the current flow is not constant over time. Beginning high and falling off exponentially, it eventually reaches zero. The current will be (V/R) x (1/e) at the moment when t=RC. The greatest current value is V/R.

1/e is roughly equal to 0.37.

Therefore, RC is the period of time in a series RC circuit during which the current will decrease to about 37% of its maximum value.

To obtain the necessary current vs. time characteristic, etc., the appropriate value of R and C is chosen based on the needs of the electronic circuit.

To know more about circuit click on the link:

https://brainly.com/question/12608516

#SPJ4

The ball with a initial velocity of 22 m/s and an angle of 20 degrees above the horizontal covers a distance of 31.6 m, before returning to the ground.

R = u² sin 2θ / g

R = Horizontal range

u = Initial velocity

θ = Angle of projectile made with horizontal

g = Acceleration due to gravity

θ = 20°

u = 22 m / s

g = 9.8 m / s²

R = 22² sin 2 ( 20 ) / 9.8

R = 484 * 0.64 / 9.8

R = 31.6 m

Horizontal range of a projectile is the horizontal distance covered by an object in projectile motion.

R = Horizontal component * Total time

R = u cos θ * 2 u sin θ / g

R = u² ( 2 sin θ cos θ ) / g

R = u² sin 2θ / g

Therefore, the ball will go 31.6 m before returning to the ground

To know more about range of a projectile

https://brainly.com/question/28043302

#SPJ1

400N  magnitude of the friction acting on the crate.

work done by gravity

[tex][w=mg sin \theta \cdotS],[w=mgh=],[w=800 \cdot2=w=1600][/tex]

Then was done by friction  external work - wask done by gravity

[tex][f_S \cdot S=3200-1600],[f_S \cdot4=1600],[f_S=400 N][/tex]

Thus the crate is not moving with constant speed then we can say that the value of friction Force is less then 400 N

So Friction Force is not zero but less then the 400N

The resistance present at the contact surface at the point of contact when two or more objects move over one another can be referred to as friction force. The direction of friction force is always perpendicular to the object's motion.

The amount of friction is influenced by the surface's roughness and outside pressures. The force of friction works more strongly on a surface the rougher it is. The same is true of outside factors.

To know more about  Friction visit : https://brainly.com/question/28356847

#SPJ4

The eventual fate of our sun is to become a steadily cooling white dwarf.

A star cannot continue its main sequence forever, because it is consuming an ever-dwindling amount of hydrogen. The main characteristic that determines the fate of a star is its mass. A star at least 10 times more massive than our sun can become a supernova. However, our sun is relatively small and is classified as a yellow dwarf.

Once its hydrogen reserve is expended it will expand, becoming a red giant, and then shrink again, becoming a white dwarf that will continue cooling for trillions of years.

You can learn more about our sun here:
brainly.com/question/2455981

#SPJ4

The coefficient of the kinetic friction between the box and the concrete is 0.25. Kinetic friction is the term for the resistance that exists between two systems while they are in contact and moving in relation to one another.

We are constantly surrounded by a force called friction that prevents relative motion between systems in contact while still allowing us to move (which you have discovered if you have ever tried to walk on ice).

Even though friction is a common force, its behavior is actually quite complex and still not fully understood. For any understandings we can obtain, we must heavily rely on observations. We are nevertheless able to deal with its simpler general qualities and comprehend the situations in which it functions.

One of the more basic aspects of friction is that it always occurs in opposition to the motion or attempted motion of the systems with respect to each other and is parallel to the contact surface between the systems. Kinetic friction is the term for the resistance that exists between two systems while they are in contact and moving in relation to one another.

Friction, for instance, makes a hockey puck sliding on ice slower. However, static friction can exist between things while they are immobile; this friction is typically stronger than kinetic friction.

To know more about kinetic friction click on the link:

https://brainly.com/question/17237604

#SPJ4

When a hillside is subjected to gravity, the slope material will tend to move downhill. The force that resists this movement is called "friction."

For example, imagine two objects: A ball and an apple. If you were to slide the apple across the floor towards the ball, they would eventually meet up—but it would take longer than if you pushed them apart and then slid them together again. That extra distance between them is because of their resistance to sliding across each other's surfaces; their friction with each other keeps them from moving too far at once.

If you push hard enough against a surface (like pushing on your couch or chair), then you'll see that pushing harder makes it easier for you to push even harder against the same object (because there's less resistance);

To learn more about slope visit: https://brainly.com/question/3605446

#SPJ4