Fred's science class is going to the Ancient Dig adventure park. His teacher got the school group package, which costs $308. The package covers the entrance fee for the group, a private dig site, and an activity guide. Fred's teacher upgraded the package to include a fossil tool kit for each of the 22 students, bringing the total to $440. Which equation can you use to find k, the cost of each tool kit?

Psychologist requires a sample size of at least 126 SI scores.

We may use the following calculation to get the minimal sample size required to estimate the mean SI score of smokers with a margin of error of 12 and a 90% confidence level:

[tex]n = [Z * (\sigma / E)]^2[/tex]

Where:

Z = the z-score associated with the confidence level (90%), which can be found using a z-score table or calculator.

For a 90% confidence level, Z is approximately 1.645.

σ = the population standard deviation (82)

E = the desired margin of error (12)

Plugging in the values, we get:

n = [1.645 * (82 / 12)]^2

n = 126.2

We round up to the closest integer as the sample size must be a whole number in order to guarantee that the sample size is sufficient to fulfill the required confidence level and margin of error.

Thus, n = 126 is the required minimum sample size.

In order to estimate the mean SI score of smokers with 90% confidence that the estimate is within 12 of the actual population mean, the psychologist requires a sample size of at least 126 SI scores.

Learn more about z-score here:

https://brainly.com/question/15016913

#SPJ1

Answer: 2

Step-by-step explanation:

We can simplify the given logarithmic expression using the logarithmic property that states:

log a base b - log c base b = log (a/c) base b

Using this property, we can rewrite the expression as follows:

log 16 base 2 - log 4 base 2 = log (16/4) base 2

Simplifying the numerator of the logarithm, we get:

log (16/4) base 2 = log 4 base 2

Now, we can evaluate the logarithm using the definition of logarithm, which states that:

log b base a = x if and only if a = b^x

In this case, we have:

log 4 base 2 = x if and only if 2^x = 4

We know that 2 raised to what power gives 4? It is 2, because 2^2 = 4.

Therefore, we have:

log 4 base 2 = 2

Hence, the value of the given logarithmic expression is 2.

The direct write-off method and the allowance method are two different ways of accounting for uncollectible accounts receivable.

The direct write-off method is a simple method of accounting for bad debts, where the uncollectible accounts receivable are written off as an expense at the time they are deemed uncollectible.

In contrast, the allowance method is a more complex method of accounting for bad debts, where the company estimates the amount of bad debt expense that it expects to incur over time and creates an allowance account to record this estimate.

The main difference between the two methods is the timing of the recognition of bad debt expense. Under the direct write-off method, bad debt expense is recognized only when an account is written off, whereas under the allowance method, bad debt expense is recognized in advance based on an estimate of the amount of bad debts.

The direct write-off method is not considered to follow generally accepted accounting principles (GAAP) because it violates the matching principle, which requires that expenses be matched with the revenues they generate in the same accounting period.

Find out more on the direct write-off method at https://brainly.com/question/24108628

#SPJ1

Answer:

To calculate how much is deducted from Scott’s paycheck, we need to first find out how much his employer pays for his health insurance premium.

55% of the annual premium is covered by the employer, so we can calculate this as:

0.55 x $20,969 = $11,532.95

Therefore, Scott’s employer pays $11,532.95 towards his health insurance premium.

To find out how much is deducted from Scott’s paycheck, we need to divide the remaining 45% of the premium by the number of pay periods in a year. Since Scott is paid biweekly, he receives 26 paychecks in a year.

45% of the annual premium is not covered by the employer, so we can calculate this as:

0.45 x $20,969 = $9,437.55

To find out how much is deducted from each biweekly paycheck, we can divide $9,437.55 by 26:

$9,437.55 ÷ 26 = $363.75 (rounded to the nearest cent)

Therefore, Scott’s employer pays $11,532.95 towards his health insurance premium and $363.75 is deducted from each of his biweekly paychecks for health insurance.

Answer:

38 inches

Step-by-step explanation:

We can use the Law of Sines to solve for the length of side g:

sin(66°)/67 = sin(30°)/g

Cross-multiplying, we get:

g*sin(66°) = 67*sin(30°)

Dividing both sides by sin(66°), we get:

g = 67*sin(30°)/sin(66°) ≈ 38 inches (rounded to the nearest inch)

Therefore, the length of side g is approximately 38 inches.

The value after solving mixed fraction is 32/10=3.2

A fraction is a metric unit for describing a piece or component of a whole. It represents the appropriate parts of the totality. A fraction is made up of two parts: the numerator and the denominator. The number at the top is the numerator, and the number at the bottom is the denominator. The numerator indicates the number of equal parts that were actually taken, whereas the denominator shows the total number of equal parts in the whole.

The quotient and remainder of a fraction are used to represent it, making it a mixed fraction. For instance, 2 1/3, where 2 is the quotient and 1 is the remainder, is a mixed fraction. A mixed fraction is a combination of a whole number and a recognised fraction.

according to question,

=51/10 - 19/10

=32/10

=3.2

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

The value of 5 1/10 minus 1 9/10 is 16/5 or 3 1/5.

It is a mixed fraction when the remainder and quotient of a fraction are utilised to represent it. A mixed fraction is, for instance, 2 1/3, where 2 is the quotient and 1 is the remainder. A whole number and a recognised fraction are combined to form a mixed fraction.

To subtract mixed numbers like 5 1/10 and 1 9/10, you need to convert them to improper fractions first.

5 1/10 can be converted to an improper fraction as follows:

5 1/10 = (5 x 10 + 1)/10 = 51/10

1 9/10 can be converted to an improper fraction as follows:

1 9/10 = (1 x 10 + 9)/10 = 19/10

Now we can subtract the two fractions:

51/10 - 19/10 = (51 - 19)/10 = 32/10

32/10 can be simplified to 16/5 by dividing both the numerator and denominator by the greatest common factor, which is 2.

So, the value of 5 1/10 minus 1 9/10 is 16/5 or 3 1/5.

To know more about fraction visit:

brainly.com/question/10354322

#SPJ1

Answer:

Let's call the unknown number "x". According to the problem, we know that:

x * (x - 6) = 27

Expanding the left side of the equation, we get:

x^2 - 6x = 27

Subtracting 27 from both sides, we get:

x^2 - 6x - 27 = 0

Now we can use the quadratic formula to solve for x:

x = (-b ± sqrt(b^2 - 4ac)) / 2a

In this case, a = 1, b = -6, and c = -27, so:

x = (-(-6) ± sqrt((-6)^2 - 4(1)(-27))) / 2(1)

x = (6 ± sqrt(180)) / 2

x = (6 ± 6sqrt(5)) / 2

x = 3 ± 3sqrt(5)

So the two possible solutions are:

x = 3 + 3sqrt(5) ≈ 8.746

x = 3 - 3sqrt(5) ≈ -2.746

Since the problem statement doesn't specify whether the number should be positive or not, both solutions are valid.

Answer: The answer could be 9 or -3.

Step-by-step explanation: The product(multiply) of a number(x) and 6 less than a number(x-6) is 27.

x(x-6)=27

x^2-6x-27=0

(x-9) (x+3)=0

x=9 or x=-3

The number is 9 or -3.

The probability that the employee will arrive between 8:05 a.m. and 8:45 a.m. is 0.8, or 80% when expressed as a percentage.

To find the probability that the employee will arrive between 8:05 a.m. and 8:45 a.m., we need to calculate the proportion of the total possible time range between 8:00 a.m. and 8:50 a.m. that falls within the specified time interval.

The total time range between 8:00 a.m. and 8:50 a.m. is 50 minutes (8:50 - 8:00 = 50). The time interval between 8:05 a.m. and 8:45 a.m. is 40 minutes (8:45 - 8:05 = 40).

So, the probability that the employee will arrive between 8:05 a.m. and 8:45 a.m. is:

Probability = (Time interval between 8:05 a.m. and 8:45 a.m.) / (Total time range between 8:00 a.m. and 8:50 a.m.)

Probability = 40 minutes / 50 minutes

Probability = 0.8

Therefore, the probability that the employee will arrive between 8:05 a.m. and 8:45 a.m. is 0.8, or 80% when expressed as a percentage.

To know more about  probability visit,

https://brainly.com/question/30034780

#SPJ1

The probability of picking a prime number is 2/3 or approximately 0.667.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen. The probability of an event can be calculated by dividing the number of favorable outcomes by the total number of possible outcomes.

Out of the given options of 2, 3, and 4, only 2 and 3 are prime numbers. Therefore, the probability of picking a prime number is:

P(prime) = number of prime options / total number of options

P(prime) = 2/3

So the probability of picking a prime number is 2/3 or approximately 0.667.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer: there is no solution

Step-by-step explanation:

The solution of the equation is [tex]x=\frac{-7 \pm 3\sqrt{3}i} {2}[/tex]

Quadratics can be defined as a polynomial equation of a second degree, which implies that it comprises a minimum of one term that is squared. It is also called quadratic equations.

The general form of the quadratic equation is: ax² + bx + c = 0

Given that, a quadratic equation (x-5)² + 3(x-5) + 9 = 0, we need to solve it,

So, put x-5 = u

Therefore,

u² + 3u + 9 = 0

Solving using quadratic formula,

[tex]x=\frac{-b \pm \sqrt{b^2-4ac}} {2a}[/tex]

Here a = 1, b = 3 and c = 9

Therefore,

[tex]u=\frac{-3 \pm \sqrt{3^2-4(9)}} {2}[/tex]

[tex]u=\frac{-3 \pm \sqrt{9-36}} {2}[/tex]

[tex]u=\frac{-3 \pm \sqrt{-27}} {2}[/tex]

[tex]u=\frac{-3 \pm 3\sqrt{3}i} {2}[/tex]

Put u = x-5,

Therefore,

[tex]x-5=\frac{-3 \pm 3\sqrt{3}i} {2}[/tex]

[tex]x=\frac{-7 \pm 3\sqrt{3}i} {2}[/tex]

Hence, the solution of the equation is [tex]x=\frac{-7 \pm 3\sqrt{3}i} {2}[/tex]

Learn more about quadratic equation click;

https://brainly.com/question/30098550

#SPJ5

The  polynomial with integer coefficients and a leading coefficient of 1  is (x-6) (x-3)²  which in turn will be: f(x) = x³ - 12x² + 45x - 54

Based on the question, If the zeros of a polynomial are said to be 6, 3, and 3, one can say that the polynomial can be written in factored form such as

f(x) = (x - 6)(x - 3)(x - 3)

The to solve this, we have to multiply it:

f(x) = (x - 6) (x² - 6x + 9)

f(x) = x³ - 6x² + 9x - 6x² + 36x - 54

f(x) = x³ - 12x² + 45x - 54

Therefore, the polynomial with integer coefficients and a leading coefficient of 1  will be f(x) = x³ - 12x² + 45x - 54

Learn more about polynomial from

https://brainly.com/question/2833285

#SPJ1

Answer:

We can use the formula for compound interest to calculate the amount of interest Brian will earn:

A = P (1 + r/n)^(nt)

where:

A = the total amount after 7 years

P = the principal amount ($9,411)

r = the annual interest rate (3.48%)

n = the number of times the interest is compounded per year (52 weeks in a year, so n = 52)

t = the number of years (7)

Plugging in the values, we get:

A = $9,411 (1 + 0.0348/52)^(52*7)

A = $9,411 (1.0006692302021135)^364

A = $12,471.36

To find the amount of interest earned, we can subtract the principal amount from the total amount:

Interest = $12,471.36 - $9,411 = $3,060.36

Therefore, Brian will earn $3,060.36 in interest after 7 years. Rounded to the nearest cent, this is $3,060.37.

The variables are as follows:

x = 4

y = 4.8

The lengths of the sides of the kites are 4.5 and 6.8 units.

A kite is a quadrilateral with 2 pairs of consecutive congruent sides. The diagonals are perpendicular in a kite.

The non vertex angles are congruent.

Therefore,

x + 0.5 = 2x - 3.5

2x - x = 0.5 + 3.5

x = 4

y + 2 = 2y - 2.8

2y - y = 2 + 2.8

y = 4.8

Hence,

length of one pair = 4 + 0.5 = 4.5 units

length of the other pair = 4.8 + 2 = 6.8 units

learn more on kite here: https://brainly.com/question/20705002

#SPJ1

x2−1x5=(x−a)2+b2−15=(−)2+

A statistical question would be:  What is the average salary of teachers in this school district?

When a question can be answered statistically, it can be done so by gathering and analysing data, for example. This particular question aims to comprehend a population or a phenomenon by using numerical data. In contrast to non-statistical questions, which are more concerned with acquiring information or opinions, statistical questions are more concerned with getting and analysing data. Statistical procedures including sampling, data analysis, and inference are frequently used to answer statistical issues.

A statistical question would be:  What is the average salary of teachers in this school district?

Learn more about statistical question here:

https://brainly.com/question/29257078

#SPJ1

Therefore, we estimate that there are 2250 Art majors in the total population.

In mathematics, a proportion is an equation that states that two ratios are equal. A ratio is a comparison of two quantities expressed as a fraction or a decimal. Since both sides of the equation are equal, the proportion is true. Proportions are used in many mathematical and real-world contexts, such as in geometry, finance, and statistics. They are useful for comparing and scaling quantities, and for solving problems involving unknown quantities or variables.

Here,

We can use proportions to estimate the total number of Art majors in the population based on the proportion of Art majors in the sample.

The proportion of Art majors in the sample is:

75/250 = 0.3

We can assume that this proportion is representative of the proportion of Art majors in the population.

So, if x is the total number of Art majors in the population, then we can set up the following proportion:

0.3 = x/7500

To solve for x, we can cross-multiply and simplify:

0.3 * 7500 = x

x = 2250

To know more about proportion,

https://brainly.com/question/31010676

#SPJ1

The computation of the increased in salary is $500.

Here, we have,

Explanation:

Data provided in the question

Salary for the first year = $50,000

CPI increase during the year = 4%

Overstated inflation = 1% i.e. 5%

The computation of the increased in salary is shown below:

= Salary of the first year × inflation rate - salary of the first year × CPI increase during the year

= $50,000 × 5% - $50,000 × 4%

= $2,500 - $2,000

= $500

Hence, The computation of the increased in salary is $500.

To learn more on percentage click:

brainly.com/question/13450942

#SPJ1

complete question:

Mark's wage contract specifies a $50,000 salary for the first year, and specifies a salary increase equal to the percentage increase in the CPI during the second year. The increase in the CPI during the year was 4.0%. If the CPI overstates inflation by 1.0% (that is, the actual price increase was 3% and not 4%), at the end of the first year Mark's salary increased by $________ more than it would have without the upward bias.

Vector a: start at (1, 3) and end at (-4, -2) in blue.

Vector b: start at (-4, -2) and end at (1, 3) in red.

Vector a+b: start at (1, 3) and end at (2, 7) in green.

To represent a+b using the parallelogram method,

we must draw vectors representing a and b.

The initial point of vector a is (1, 3), and its terminal point is (-4, -2). The initial point of vector b is (-4, -2), and its terminal point is (1, 3).

Using the vector tool, we then  draw the vectors a and b. We start at the initial point of each vector and select the terminal point.

Vector a: start at (1, 3) and end at (-4, -2)

Vector b: start at (-4, -2) and end at (1, 3)

We the diagonal, we start at the initial point of vector a, (1, 3), and draw a line parallel to vector b that passes through the initial point of vector b, (-4, -2). This line intersects the line parallel to vector a that passes through the initial point of vector b at point (2, 7). This point is the terminal point of the diagonal vector, which is a+b.

We use the vector tool, we can draw vector a in blue, vector b in red, and vector a+b in green.

Vector a: start at (1, 3) and end at (-4, -2) in blue.

Vector b: start at (-4, -2) and end at (1, 3) in red.

Vector a+b: start at (1, 3) and end at (2, 7) in green.

Learn more about diagonal vector at: https://brainly.com/question/30804909

#SPJ1

Answer:

2/15 litre

Step-by-step explanation:

There is 1 litre in total. Max used 1/5 litre.

1 - 1/5 = 4/5 litre

Then he used 5/6 of the remaining 4/5 litre. He would have 1/6 of 4/5 litre left.

1/6 * 4/5 = 2/15 litre

or

You could do 5/6 * 4/5 to find out how much syrup he used on Sunday and then subtract that from 4/5 litre. It will give you the same answer

Generally, it is better to use a Line Graph if your raw data includes non-numeric values. If your raw data only has numeric values, use a Scatter Plot. You can use a Line Graph if you want to label your horizontal axis with text labels. These labels can represent evenly spaced values as days, weeks, and years.

Emilee will spend around $3,726 for her wrist surgery once her insurance company pays 70% and she meets the $371 deductible.

Calculating out-of-pocket costs for a medical expense after insurance coverage and deductibles often requires simple arithmetic.

To begin, deduct the deductible from the overall cost of the surgery: $12,791 - $371 = $12,420.

70% of the remaining cost after the deductible is calculated as follows: 70% of $12,420 = $8,694.

Total cost after insurance coverage: $12,420 - $8,694 = $3,726

Learn more about Basic arithmetic here:

https://brainly.com/question/30553381

#SPJ1

Therefore, the volume of Prism B is 727/4 ft³ or 181 3/4 ft³ in mixed number form.

Subtract the denominator from the numerator. The quotient should be expressed as a whole number in step 2. Step 3: Enter the denominator and numerator, respectively, as the remainder and the divisor.

We can write: Using the formula for a prism's volume (V = Bh, where B is the base area):

We must determine Prism B's cross-sectional area in order to get the volume of Prism B. By dividing the height equation of prism A by its volume equation, the following result is obtained:

cross-sectional area of Prism A = (Volume of Prism A) / (height of Prism A) = (872/1 ft³) / (6 ft) = 218/3 ft²

Using the scale factor equation for height, we get:

k = (height of Prism A) / (height of Prism B) = (6 ft) / (31/12 ft) = 24/31

Using the scale factor equation for cross-sectional area, we get:

k² = (cross-sectional area of Prism A) / (cross-sectional area of Prism B) = (218/3 ft²) / (cross-sectional area of Prism B)

Solving for the cross-sectional area of Prism B, we get:

cross-sectional area of Prism B = [tex](218/3 ft^2) / k^2 = (218/3 ft^2) / (24/31)^2 = 59/3 ft^2[/tex]

Finally, substituting the height and cross-sectional area of Prism B into the volume equation of Prism B, we get:

Volume of Prism B = (cross-sectional area of Prism B) * (height of Prism B) = [tex](59/3 ft^2) * (31/12 ft) = 727/4 ft^3.[/tex]

To know more about volume visit:-

https://brainly.com/question/1578538

#SPJ1

the scale factor used in the dilation of triangle D to create triangle D' is one-third. This means that every length in triangle D' is one-third the length of the corresponding length in triangle D.

How to solve the question?

To determine the scale factor used in the dilation of triangle D to create triangle D', we need to compare the corresponding sides of both triangles. The corresponding sides of two similar triangles are proportional, meaning that they have the same ratio.

In this case, we can see that the length of every side of triangle D' is one-third the length of the corresponding side of triangle D. For example, the length of the shortest side of triangle D is 18, while the length of the shortest side of triangle D' is 6. Similarly, the length of the longest side of triangle D is 30, while the length of the longest side of triangle D' is 10.

We can use this information to find the scale factor by dividing the length of any side of triangle D' by the length of the corresponding side of triangle D. Let's choose the shortest side for this calculation:

scale factor = length of corresponding side in D' / length of corresponding side in D

scale factor = 6 / 18

scale factor = 1/3

Therefore, the scale factor used in the dilation of triangle D to create triangle D' is one-third. This means that every length in triangle D' is one-third the length of the corresponding length in triangle D.

To know more about triangles visit :-

https://brainly.com/question/17335144

#SPJ1

Answer:

64π

Step-by-step explanation:

Use the formula for an area of a circle
[tex]A = \pi r^2[/tex]
Half of 16 is 8.
8*8 = 64.

The area of a circle with a diameter of 16 meters is equal to 64π or 200.96 square meters.

Mathematically, the area of a circle can be calculated by using this formula:

[tex]\text{Area} = \pi \text{r}^2[/tex]

Where:

[tex]\text{r}[/tex] represents the radius of a circle.

[tex]\text{Note:} \ \text{Radius} = \dfrac{\text{diameter}}{2} = \dfrac{16}{2} = 8 \ \text{meters}.[/tex]

By substituting the radius into the formula for the area of a circle, we have the following;

[tex]\text{Area of circle} = \pi \times 8^2[/tex]

[tex]\bold{Area} \ \text{of circle} = 64\pi \ \text{or} \ 200.96[/tex] square meters.

Read more on area of circle here: brainly.com/question/15531597

Using a right-hand sum with three intervals, the approximate area under the curve of the function f(x) = x³ between the limits of integration a=0 and b=3 is 36 square units.

Numbers and their variants, equations and related structures, forms and their arrangements, and the places where they might be found are all topics covered in mathematics. The term "function" describes the relationship between a collection of inputs, each of which has a corresponding output.

To estimate the area under the curve of the function f(x) = x3 between the limits of integration a=0 and b=3, we must divide the interval [0, 3] into three subintervals of equal width.

Each subinterval's width, x, may be calculated as follows:

Δx = (b - a) / n = (3 - 0) / 3 = 1

So, the three subintervals are:

[0, 1], [1, 2], [2, 3]

To compute the right-hand total, we evaluate the function at each subinterval's right endpoint and multiply it by the breadth of the subinterval. Then we add these products together to calculate the area under the curve. The right-hand sum may be stated mathematically as follows:

RH = Δx * [f(1) + f(2) + f(3)]

where x represents the width of each subinterval, f(x) = x3 represents the function we are integrating, and f(i) represents the function's value at the right endpoint of the i-th subinterval.

RH = 1 * [f(1) + f(2) + f(3)]

= 1 * [(1³) + (2³) + (3³)]

= 1 * [1 + 8 + 27]

= 36

Using a right-hand sum with three intervals, the approximate area under the curve of the function f(x) = x³ between the limits of integration a=0 and b=3 is 36 square units.

To know more about function visit:

brainly.com/question/28193995

#SPJ1

1. A  back-to-back stem-and-leaf plot for the data would be

Mowed by you          stem           mowed by your friend

       8   7   5  4            0              

       7   2   2  0            1                  9

            5   1   0           2                  7    8    9

                      0           3                  0    1     2     2   5   5   8

                                    4                  4

KEY: 3 | 1 ⇒ 31

2.  The mean for you = 14.25 and your friend 31.3. This means that your friend has a higher mean than you. The median for you is 11 and your friend is 30.5. Given that both the mean and median of your friend is higher than yours, it means that your friend mowed more lawns than you

3. The range of data for you is 26 and for your friend is 21.

To find the mean for each data set, add all the number together and divide it by the set number. For example;

4 + 5 + 7 + 8 + 10 + 12 + 12 + 17 + 20 + 21 + 25 + 30

= 171 / 12

= 14.25

To find the range for the data set, simply take the highest number of a set and minus it by the lowest number. For Example;

For your data set, it is 30 - 4 = 26

To find the median for the data sets, simply look for the number in the middle. However, in your data set, there are two middle numbers. take the sum of the two numbers and divide it by 2.

            (10 + 12) / 2 = 11

Find more exercises on calculating mean, median and range;

https://brainly.com/question/16073893

#SPJ1

The horizontal asymptote   of  the given function is 0

Given the function y = 19800/x

Vertical asymptote occurs at when f(x) = 0 where;

f(x) is the denominator of the given function.

From the expression given: f(x) = x

Since f(x) => 0, hence x = 0

To get the horizontal asymptote, we will look at the degree of the numerator and denominator.

If the degree of numerator is less than the denominator,

the horizontal asymptote will be zero. From the function, we can see that the degree of the numerator is zero (being a constant) and that of the denominator is 1.

Since 0<1, hence the horizontal asymptote is 0

x = 0, y = 0

Learn more about function here:

https://brainly.com/question/29633660

#SPJ1