Answer:
The magnitude of the final velocity is approximately 0.526 m/s in approximately the direction of 8.746° East of South
Explanation:
The given collision parameters are;
The kind of collision experienced by the four velcro-lined air-hockey disk = Inelastic collision
The mass of the first disk, m₁ = 50.0 g
The velocity of the first disk, v₁ = 0.80 m/s West = -0.8·i
The mass of the second disk, m₂ = 60.0 g
The velocity of the second disk, v₂ = 2.50 m/s North = 2.5·j
The mass of the third disk, m₃ = 100.0 g
The velocity of the third disk, v₃ = 0.20 m/s East = 0.20·i
The mass of the fourth disk, m₄ = 40.0 g
The velocity of the fourth disk, v₄ = 0.50 m/s South = -0.50·j
Therefore, the total initial momentum of the four velcro-lined air-hockey disk, [tex]\Sigma P_{initial}[/tex] is given as follows;
[tex]\Sigma P_{initial}[/tex] = m₁·v₁ + m₂·v₂ + m₃·v₃ + m₄·v₄ = 50.0×(-0.80·i) + 60.0×(2.50·j) + 100 × (0.20·i) + 40.0 × (-0.50·j)
∴ [tex]\Sigma P_{initial}[/tex] = -40·i + 150·j + 20·i - 20·j = -20·i + 130·j
∴ [tex]\Sigma P_{initial}[/tex] = -20·i + 130·j
By the law of conservation of linear momentum, we have;
[tex]\Sigma P_{initial} = \Sigma P _{final}[/tex] = -20·i + 130·j
Therefore, given that the collision is perfectly inelastic, the disks move as one after the collision and the four masses are added to form one mass, "m", m = m₁ + m₂ + m₃ + m₄ = 50.0 + 60.0 + 100.0 + 40.0 = 250.0
∴ m = 250.0 g
Let, "v" represent the final velocity of the four disks moving as one after the collision
We have;
[tex]\Sigma P _{final}[/tex] = m × v = 250.0 × v = -20·i + 130·j
∴ v = -20·i/250 + 130·j/250 = -0.08·i + 0.52·j
The final velocity of the four disks after collision, v = -0.08·i + 0.52·j
The magnitude of the final velocity, [tex]\left | v \right |[/tex] = √((-0.08)² + (0.52)²) ≈ 0.526
[tex]\left | v \right |[/tex] ≈ 0.526 m/s
The direction of the final velocity, θ = arctan(0.52/(-0.08)) ≈ -81.254°
The direction of the final velocity, θ ≈ -81.254° which is 8.746° East of South
A hiker walks 5.0 kilometers due north for twenty minutes. He turns due west and travels 12 kilometers in 60 more minutes. Then he walks 7.0 kilometers due north in forty minutes. What is the average speed of the hiker when traveling north?
Answer:
The hikers average speed due north is 0.2 km per minute.
Explanation:
Speed is the ratio of distance moved by a body to the time taken.
i.e speed = [tex]\frac{distance}{time}[/tex]
Since the hiker walks due north and due west, then his average speed due north can be determined by;
Average speed = [tex]\frac{total distance due north}{total time taken}[/tex]
Total distance due north = 5.0 + 7.0
= 12.0 km
Total time taken = 20 + 40
= 60 minutes
= 1 hour
Average speed due north= [tex]\frac{12}{60}[/tex]
= [tex]\frac{1}{5}[/tex]
= 0.2
Average speed due north = 0.2 km/minute
The hikers average speed due north is 0.2 km per minute.
What does the slope on a speed vs. time graph represent
Answer:
It represents the amount of speed per time or (x) for speed (y) for time so the slope would be like y/x
Which one of the following is correct? *
A. Average speed and average velocity are the same.
B. There is no difference between uniform motion and uniformly accelerated motion.
C. Acceleration is the rate of change of speed.
D. Uniformly accelerated motion is a motion with constant acceleration.
Answer:
uniform acceleration motion is a motion with constant acceleration.
If an object undergoes a change in velocity, then it also undergoes a change in:
Answer:
acceleration
Explanation:
If the velocity is not constant, then there must be a beginning and ending of its velocity. If that is so and there is also a change in time (which there must be) then there is a change in acceleration.
The formula for that is a = (vf - vi)/t
Answer:
probably acceleration
Explanation:
acceleration is the change in velocity
A 5.00 kg crate is on a 21.0° hill.
Using X-Y axes tilted down the
plane, what is the y-component
of the weight?
(Unit = N)
Answer:
17.56 N
Explanation:
Given that,
Mass of a crate, m = 5 kg
It is on a 21.0° hill
We need to find the y component of the weight.
y component = mgsinθ
Put all the values,
y-component = 5×9.8×sin(21)
= 49×sin(21)
= 17.56 N
So, the y-component of the weight is 17.56 N.
Answer:
-45.745
Explanation:
it is negative because it is downwards.
If an object of 10kg has gained 300J of GPE, what height has the object gained
How high did a worker lift a 25 kg bag of sand if it now has 2940 of gravitational potential energy
Answer:
12 m
Explanation:
From the question given above, the following data were obtained:
Mass (m) of bag = 25 kg
Potential energy (PE) = 2940 J
Height (h) =?
Objects carried to a particular height will always experience an acceleration due to gravity of 9.8 m/s².
With the above in mind, we can obtain the height to which the load is lifted to as shown below:
Mass (m) of bag = 25 kg
Potential energy (PE) = 2940 J
Acceleration due to gravity (g) = 9.8 m/s².
Height (h) =?
PE = mgh
2940 = 25 × 9.8 × h
2940 = 245 × h
Divide both side by 245
h = 2940 / 245
h = 12 m
Therefore, the worker lifts the load to a height of 12 m.
Match each term with the appropriate definition.
mass
the amount of matter in an object
balance
the downward pull on an object due to
gravity.
weight
a tool used to measure weight
scale
a tool used to measure mass
Answer:
mass- the amount of matter in an object
balance- tool used to measure mass
scale- a tool used to measure weight
weight- the downward pull on an object due to gravity
What is the distance traversed by the particle between 0 seconds and 6 seconds?
Answer:
I dont know to be honest
Explanation:
i dont know to be honest
HELP ME ASAP PLZZ
Which of the following is not a measurement taken by a radiosonde?
a. atmospheric composition
b. atmospheric pressure
c. wind speed
d. wind direction
Answer:
A atmospheric composition
substances found in the food that the body needs
Answer:
There are six major nutrients: Carbohydrates (CHO), Lipids (fats), Proteins, Vitamins, Minerals, Water.
Explanation:
Help Please! a lot of points for 3 questions
Answer:
1. Point 2.
2. Either #1 or #4 (sorry, I'm not 100% sure).
3. I'm pretty sure #3.
I hope this helps!
Hi!! Does anyone know this answer? :D
Answer:
Im not fully corrrect but I would say C
Explanation:
The speed of a sound wave traveling through air is 400 meters per second. The wavelength of the wave is 25 meters What is the
frequency of the wave?
Answer:
16Hz
Explanation:
Given parameters:
Speed of sound = 400m/s
Wavelength = 25m
Unknown:
Frequency of the wave = ?
Solution:
To solve this problem;
V = F ∧
V is the velocity
F is the frequency
∧ is the wavelength
400 = F x 25
F = 16Hz
Answer:
16 hertz... I got it right on study-island
Explanation:
WILL MARK BRAINLIST!!! only for correct answer
NEED CORRECT ANSWER ASAPPP
Answer:
number 4
Explanation:
The reflection of light happens when the light bounces off the reflecting surface. That is described by the last (bottom) schematics.
Therefore, select answer number 4.
Which of these foods has the most protein?
Broccoli
Strawberries
Chicken
Brown Rice
Answer: Ima have to say broccoli
Explanation:
Explain how the design of a racing car makes it less likely to turn over.
The principles which allow aircraft to fly are also applicable in car racing. The only difference being the wing or airfoil shape is mounted upside down producing downforce instead of lift. The Bernoulli Effect means that: if a fluid (gas or liquid) flows around an object at different speeds, the slower moving fluid will exert more pressure than the faster moving fluid on the object. The object will then be forced toward the faster moving fluid. The wing of an airplane is shaped so that the air moving over the top of the wing moves faster than the air beneath it. Since the air pressure under the wing is greater than that above the wing, lift is produced. The shape of the Indy car exhibits the same principle. The shape of the chasis is similar to an upside down airfoil. The air moving under the car moves faster than that above it, creating downforce or negative lift on the car. Airfoils or wings are also used in the front and rear of the car in an effort to generate more downforce. Downforce is necessary in maintaining high speeds through the corners and forces the car to the track. Light planes can take off at slower speeds than a ground effects race car can generate on the track. An Indy ground effect race car can reach speeds in excess of 230 mph using downforce. In addition the shape of the underbody (an inverted wing) creates an area of low pressure between the bottom of the car and the racing surface. This sucks the car to road which results in higher cornering speeds.
The total aerodynamic package of the race car is emphasized now more than ever before. Teams that plan on staying competitive use track testing and wind tunnels to develop the most efficient aerodynamic design. The focus of their efforts is on the aerodynamic forces of negative lift or downforce and drag. The relationship between drag and downforce is especially important. Aerodynamic improvements in wings are directed at generating downforce on the race car with a minimum of drag. Downforce is necessary for maintaining speed through the corners. Unwanted drag which accompanies downforce will slow the car. The efficient design of a chassis is based on a downforce/drag compromise. In addition the specific race circuit will place a different demand on the aerodynamic setup of the car.
A road course with low speed corners, requires a car setup with a high downforce package. A high downforce package is necessary to maintain speeds in the corners and to reduce wear on the brakes. This setup includes large front and rear wings. The front wings have additional flaps which are adjustable. The rear wing is made up of three sections that maximize downforce.
The speedway setup looks much different. The front and rear wings are almost flat and are used as stabilizers. The major downforce is found in the shape of the body and underbody. Drag reduction is more critical on the speedway than on other circuits. Since the drag force is proportional to the square of the speed, minimizing drag is a primary concern in the speedway setup. Lap speeds can average over 228 mph and top speeds can exceed 240 mph on a speedway circuit. Effective use of downforce is especially pronounced in highspeed corners. A race car traveling at 200 mph. can generate downforce that is approximately twice its own weight.
Generating the necessary downforce is concentrated in three specific areas of the car. The ongoing challenge for team engineers is to fine tune the airflow around these areas.
When you listen to the radio, watch TV, or cook food in a microwave, you are making use of properties of electromagnetic waves. Which statement about electromagnetic waves is false?
A. White light is the absence of all color.
B. Higher-frequency electromagnetic waves have more energy.
C. The sun radiates several different types of electromagnetic energy.
D. The frequency of an electromagnetic wave is related to its wavelength.
Answer:
A. White light is the absence of all color.
Explanation:
It is false that white light is the absence of all color. In fact, white light is the presence of all colors in the spectrum.
Electromagnetic waves are waves that do not require any material medium for propagation. It is the interaction of electric and magnetic fields.
The higher frequency electromagnetic waves like the gamma-rays and x-rays have more energy. The sun furnishes the universe with electromagnetic energy. The higher the wavelength, the lesser the energy of the electromagnetic radiation.A car traveled 1,215 km West from El Paso to Dallas in 13.5 hours. What was its velocity?
A. 90m/s West
B. 90km/h
C. .09km/h West
D. 90km/h West
Answer:
D. 90km/hr due West
Explanation:
Given parameters:
Displacement = 1215km
Time = 13.5hr
Unknown:
Velocity = ?
Solution:
Velocity is the displacement divided by the time taken;
Velocity = [tex]\frac{displacement}{time}[/tex] = [tex]\frac{1215km}{13.5hr}[/tex] = 90km/hr
Velocity is 90km/hr due West
What is the speed of a wave with a wavelength of 2 m and a frequency of 9 Hz?
Answer:
The speed of a wave would be 18 with a wavelength of 2 m and a frequency of 9 Hz.
An 69-kg jogger is heading due east at a speed of 1.6 m/s. A 63-kg jogger is heading 14 ° north of east at a speed of 1.5 m/s. Find (a) the magnitude and (b) the direction of the sum of the momenta of the two joggers. Describe the direction as an angle with respect to due east.
Answer:
[tex]P=203.3819375kg.m/s\\P\approx203.4kg.m/s[/tex]
[tex]\theta=6.4541\textdegree North East\\\theta\approx6.5\textdegree North East[/tex]
Explanation:
From the question we are told that
Mass of first jogger [tex]M=69kg[/tex]
Speed[tex]v_1=1.6m/s[/tex]
Direction [tex]d= East[/tex]
Mass of 2nd jogger [tex]M=63kg[/tex]
Speed [tex]v_2=1.5m/s[/tex]
Direction [tex]d= 14\textdegree north[/tex]
Generally equation for momentum along the the horizontal is mathematically given as
[tex]P_x=m_1v_1 +m_2v_2cos\theta[/tex]
[tex]P_x=(69)*(1.6) +(63)*(1.5)cos14[/tex]
[tex]P_x=202.0929461kg.m/s[/tex]
Generally equation for momentum along the the vertical is mathematically given as
[tex]P_y=m_2v_2cos\theta[/tex]
[tex]P_x=22.86161913kgm/s[/tex]
a)Generally the magnitude of momentum is mathematically given by
[tex]P=\sqrt{(P_x)^2+(P_y)^2}[/tex]
[tex]P=\sqrt{(202.0929461)^2+(22.86161913)^2}[/tex]
[tex]P=\sqrt{41364.21249}[/tex]
[tex]P=203.3819375kg.m/s[/tex]
[tex]P\approx203.4kg.m/s[/tex]
b) Generally the angle [tex]\theta[/tex] is mathematically given by
[tex]\theta=tan^-^1\frac{py}{px} \\[/tex]
[tex]\theta=tan^-^1\frac{22.86161913}{202.0929461}[/tex]
[tex]\theta=tan^-^1(0.1131242805)[/tex]
[tex]\theta=6.4541\textdegree North East[/tex]
Sultan travels 40 km north then 60 km west to reach the stadium and watch the football match. What
is Sultan's displacement?
Answer:
72.11
Explanation:
Using the formula:
R^2=A^2+B^2
R= √ A^2+B^2
Where R= displacement
A=40km
B=60km
R= √ 40^2+60^2
R= √ 1600+3600
R= √ 5200
R=72.11km
Please help for 30 points
write at least 3 rules that summarize how magnets move objects.
Answer:
Magnets work by using Earth's magnetic pull.
Explanation:
Magnets move objects because they are made of steel or metal. And for that reason, they can stick to objects that are metal.
Think about holding a glass of cold water. Your hand is warmer than the glass. Do the particles in your hand or those in the glass of cold water move faster? Why?
technically usually the warmer object/substances particles move master which causes friction among the particles plus the kinetic energy being converted to thermal energy, so i would say the hand.
A guitar string is plucked. What best describes the formation and transmission of the sound wave?
The string vibrates the surrounding air, which produces a transverse wave.
The string vibrates the surrounding air, which produces a longitudinal wave.
The string produces a longitudinal wave that travels without a medium.
The string produces a transverse wave that travels without a medium.
The string vibrates the surrounding air, which produces a longitudinal wave.
Brainly if correct? Please and thank you :D
The guitar string vibrates the surrounding air, which produces a transverse wave.
What are transverse waves and longitudinal waves?Longitudinal waves:In a longitudinal wave, the medium or channel moves parallel to the wave in the same direction. Here, the particles are moving from left to right, which causes other particles to vibrate.Examples: sound waves in the air; vibration in a spring.Transverse wavesThe medium or channel flows perpendicular to the wave's direction in a transverse wave. Here, the waves flow horizontally while the particles oscillate up and down.Examples: electromagnetic waves; waves in a string.Why does plucking a guitar string produces transverse waves?
A transverse wave can be used to represent the motion of a guitar string since it oscillates up and down perpendicular to its axis of motion.
Learn more about waves produced due to plucking a string of guitar here:
https://brainly.com/question/15853432?referrer=searchResults
#SPJ2
Can someone please help me?
Answer:
acceleration...............
Answer:
speed
Explanation:
wanna see some real speed betch
The work done by a machine is always less then the work done on a
machine because of
Answer:
because of Friction is always present.
Advantages of wave model
Explanation:
plzz if it helps you then plzz mark me brainliest
You blow up a balloon but don't tie it. When you let it go, it flies around the room.
Which of Newton's Laws does the scenario describe?
1st Law
2nd Law
3rd Law
Answer:
3rd law beacuse there a flies
An astronaut sitting on the launch pad on Earth's surface is 6,400 kilometers from Earth's center and weighs 400 newtons. Calculate her weight when she reaches an altitude of 6,400 kilometers above the surface of Earth.
Answer:
weight at height = 100 N .
Explanation:
The problem relates to variation of weight due to change in height .
Let g₀ and g₁ be acceleration due to gravity , m is mass of the object .
At the surface :
Applying Newton's law of gravitation
mg₀ = G Mm / R²
At height h from centre
mg₁ = G Mm /h²
Given mg₀ = 400 N
400 = G Mm / R²
400 = G Mm / (6400 x 10³ )²
G Mm = 400 x (6400 x 10³ )²
At height h from centre
mg₁ = 400 x (6400 x 10³ )²/ ( 2 x 6400 x 10³)²
= 400 / 4
= 100 N .
weight at height = 100 N