formulate your own hypothesis based on drought

The first set of coordinates, 98° 7' s, 43° 38' w, is incorrect because the latitude coordinate should not be greater than 90° (the maximum latitude value is 90° north and 90° south). The second set of coordinates, 59° 25' n, 183° 19' w, is incorrect because the longitude coordinate should not be greater than 180° (the maximum longitude value is 180° east and 180° west).

1. The coordinates 98° 7' S, 43° 38' W are incorrect because the latitude value (98°) is out of range. Latitude can only range from 0° to 90° (north or south), as it measures the distance from the equator.
2. The coordinates 59° 25' N, 183° 19' W are incorrect because the longitude value (183°) is out of range. Longitude can only range from 0° to 180° (east or west), as it measures the distance from the Prime Meridian.

Learn more about Prime Meridian here:

https://brainly.com/question/20573958

#SPJ11

The patterns of cell phone use that is mots correct is B. People in Pakistan often use their phones to access the Internet.

According to research, the people in Pakistan often use their cell phones to access the internet as Pakistan Telecommunication Authority found that nearly half of all mobile phone users in the country regularly use their devices to go online.

This trend is expected to continue as the country's mobile network infrastructure expands and more people gain access to affordable smartphones.

Read more about cell phone use

brainly.com/question/23433108

#SPJ1

To describe the relationship between the graphs of functions f(x) and g(x), consider their amplitude, period, and shifts:

1. Amplitude: Compare the heights of the peaks and troughs of both graphs. If the amplitudes are different, specify which function has a larger amplitude.

2. Period: Determine the length of one complete cycle for each graph. If their periods differ, mention which function has a shorter or longer period.

3. Shifts: Observe any horizontal or vertical shifts between the graphs. Identify if one graph is shifted left/right or up/down compared to the other.

By considering these aspects, you can effectively describe the relationship between the graphs of f(x) and g(x).

To learn more about graphs of functions, click here:

https://brainly.com/question/27757761

#SPJ11

NOTE: The above question is incomplete. here's the complete question.

QUESTION: Describe the relationship between the graphs of f and g. consider amplitude, period, and shifts.

The labelling theory claims that deviance is not inherent in an act, but rather tends to focus on majorities' proclivity to label minorities or those perceived to be deviant from normal cultural norms negatively.

This is a social behaviour theory that states that the way other members of society label people influences their behaviour significantly. It has been used to explain a wide range of group social behaviour, including deviant criminal behaviour. The self-fulfilling prophecy is a central feature of labelling theory, in which the labelled correspond to the label in terms of delinquent behaviour. It has been castigated for choosing to ignore the individual's capacity to defy warning labels and assuming that labelling is a natural process.

To know about labelling theory visit:

https://brainly.com/question/30413731

#SPJ1

Answer:

iron Rick silicate rock

After the partition of India and Pakistan, Options A. Massive migrations across the border and B. Widespread violence and riots were the events that directly happened.

Millions of Hindus and Muslims migrated across the newly formed border, resulting in one of the largest migrations in history. This led to widespread violence and riots between the two communities, with estimates of hundreds of thousands to millions of deaths.

Option C. Establishment of a democratic government in India, also took place, with India establishing a democratic government led by Jawaharlal Nehru. Option D did not happen, as India and Pakistan became hostile toward each other and engaged in several wars.

Option E didn't happen immediately, as both countries faced the challenges of partition, violence, and instability. However, both countries did experience periods of economic growth and development in the following decades.

To learn more about, Partition of India, visit:

https://brainly.com/question/1134392

Here's the complete question,

In August 1947, after three hundred years, the British left South Asia. The subcontinent was partitioned into two independent states: 1. Hindu-majority India and 2. Muslim-majority Pakistan. Which of the following happened directly after these events?

A. Massive migrations of Hindus and Muslims across the border.
B. Widespread violence and riots between Hindus and Muslims.
C. The establishment of a democratic government in India.
D. The formation of a military alliance between India and Pakistan.
E. A period of economic growth and development in both countries.

The answers are- A. Massive migrations of Hindus and Muslims across the border and B. Widespread violence and riots between Hindus and Muslims.

These were the events that happened directly after the events mentioned in the question.

Hence, option A. and B. are correct.

According to the question, After three hundred years, the British left South Asia in August 1947, Hindu-majority India and Muslim-majority Pakistan were created from the division of the subcontinent into two sovereign republics, what happened after these events, to which the options are-

After these events, One of the greatest migrations in history occurred when millions of Muslims and Hindus crossed the recently established boundary.

As a result, there was intense fighting and rioting between the two populations, which resulted in tens of thousands to millions of fatalities, according to estimates.

To know more about Partition Of India visit:

https://brainly.com/question/1134392

#SPJ1

The learning objectives of this lecture tutorial are to help students distinguish between chemical and physical weathering and to relate parent material to the type of weathering that is likely to occur.

After completing this lecture tutorial, students should be able to distinguish between chemical and physical weathering and relate parent material to the type of weathering that is likely to occur.
Part 1: Comparison of Chemical and Physical Weathering
1. When you put salt (the mineral halite) in hot water, after 10 minutes, you cannot see the salt in the water. This is because the salt undergoes chemical weathering, where it dissolves in the water and forms a homogeneous solution.
2. When you put sand (the mineral quartz) in hot water, after 10 minutes, you can still see the sand in the water. The sand undergoes physical weathering, where it remains as solid particles suspended in the water. The sand is different from the salt because it does not dissolve and remains visible in the water.

Learn more about  Physical Weathering here:

https://brainly.com/question/14426457

#SPJ11

During times when precipitation exceeds potential evapotranspiration, there can be various pathways for the excess water like water may go into deep percolation as groundwater, extra water goes into soil-water recharge, and there cannot be a deficit.

One pathway is deep percolation into the groundwater system. This means that the water infiltrates through the soil and accumulates in the saturated zone below the surface. Groundwater can then be used for various purposes such as drinking water, irrigation, and industrial processes.

Another pathway for excess water is soil-water recharge. This occurs when the soil is not at field capacity and can still absorb more water. The water infiltrates through the soil and replenishes the soil moisture, which can benefit vegetation and crops. However, if the soil is already at field capacity, the excess water can result in surface runoff and erosion.

It is important to note that during times when precipitation exceeds potential evapotranspiration, there cannot be a deficit. This means that all the water that enters the system will be used in some way, whether it is through groundwater recharge or soil-water replenishment. Understanding these pathways can help in managing water resources and ensuring that they are used in a sustainable manner.

Know more about groundwater here:

https://brainly.com/question/14241380

#SPJ11

Answer: The mass wasting process most likely to affect the area around tilted mountain is rock slide.

Explanation:

Rock slides occur when large sections of rock break away from a slope and slide downhill, often due to the presence of fractures or weaknesses in the rock. This type of mass wasting is more common on steep slopes and in areas with rugged terrain.

Based on the Grand Canyon geologic map, the minimum amount of time that elapsed between the deposition of the Paleozoic sedimentary rocks and the Quaternary volcanics is approximately 600 million years. The Paleozoic sedimentary rocks were deposited during the Paleozoic Era, which spanned from 541 million to 252 million years ago.

On the other hand, the Quaternary volcanics were formed during the Quaternary Period, which began 2.6 million years ago and continues until the present day. This means that there were several geological periods and eras, including the Mesozoic and Cenozoic eras, that occurred between the Paleozoic and Quaternary periods.

Throughout this long timespan, various geological processes such as erosion, uplift, and tectonic activity shaped the landscape of the Grand Canyon. The result of these processes is the stunning geological record that is visible in the layers of rock that make up the canyon walls. The different colors and textures of the rocks represent different periods in Earth's history, and provide valuable insights into the planet's evolution over time.

to know more about grand canyon geologic map click this link -

brainly.com/question/7513662

#SPJ11

The energy that drives longshore currents is derived from wind waves approaching the beach front at an angle. As waves approach the shore, they create a zig-zag pattern that pushes water along the coast. This results in the development of a longshore current, which can be powerful enough to move sediment and create sandbars. Hurricanes and cyclones can contribute to the energy of longshore currents, but they are not the primary source. Major surface currents, such as the Gulf Stream, and monthly high tides do not directly drive longshore currents.

Longshore currents are generated when a "train" of waves reach the coastline and release bursts of energy. The speed at which waves approach the shore depends on sea floor and shoreline features and the depth of the water.A longshore current is a current that flows parallel to the shore within the zone of breaking waves. Longshore currents develop when waves approach a beach at an angle (Figure 12.37). Longshore currents cause sediment transport called longshore drift.

TO KNOW MORE ABOUT longshore currents CLICK THIS LINK -

brainly.com/question/29800365

#SPJ11

One major similarity between a Kuiper Belt Object (KBO) and a comet is their composition. Both KBOs and comets are made of ice, dust, and rocky materials. However, it is important to note that their locations in the Solar System and their orbits differ. KBOs are generally found in the outer Solar System within the Kuiper Belt, while comets can originate from both the Kuiper Belt and the more distant Oort Cloud, and their orbits can bring them closer to Earth and the inner Solar System

Kuiper Belt Objects (KBOs) and comets both originate from the outer Solar System beyond the orbit of Neptune. KBOs are small, icy bodies that are typically composed of frozen gases such as methane, ammonia, and water, as well as rock and dust. They orbit in the Kuiper Belt, a region of the outer Solar System that contains thousands of small icy bodies. Comets, on the other hand, are a type of small Solar System body that are also composed of frozen gases, rock, and dust. They typically originate from the Kuiper Belt or the Oort Cloud, a hypothetical cloud of icy objects that surrounds the Solar System at a distance of up to 100,000 AU. Comets are known for their highly elliptical orbits, which can bring them close to the Sun and then take them out to the far reaches of the Solar System.

Learn more about region here:

https://brainly.com/question/13162113

#SPJ11

Peat bogs is/are NOT an example of alternative hydrocarbon sources. The correct option is D.

Peat bogs are not an example of alternative hydrocarbon sources. While methane hydrates, oil shales, and tar sands are all sources of hydrocarbons that can be extracted and processed for energy production, peat bogs are not considered hydrocarbon sources in the same sense.

Peat bogs are a type of wetland where dead plant material accumulates and forms peat, which is a precursor to coal. Although peat can be used as a fuel source, it is not categorized as a hydrocarbon like the other options mentioned.

To recap, out of the options provided, peat bogs are NOT an example of alternative hydrocarbon sources, while methane hydrates, oil shales, and tar sands are considered alternative sources of hydrocarbons.

To know more about Peat, refer here:

https://brainly.com/question/19322338#

#SPJ11

Complete question:

________is/are NOT an example of alternative hydrocarbon sources.

a. Methane hydrate

c. Oil shales

b. Peat bogs

d. Tar sands

Coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water has a higher specific heat capacity than land, which means it can absorb and store a lot of heat energy before its temperature changes significantly. As a result, coastal areas experience milder temperatures than inland areas, where temperatures can fluctuate more dramatically.

During the day, when the sun is shining, land surfaces heat up quickly and become much hotter than nearby water bodies. This causes the air above the land to rise and cooler air from over the water to flow in and replace it. This flow of cooler air from the water is known as a sea breeze. The sea breeze helps to cool down the land and keep temperatures relatively stable, preventing the temperature from rising too high.

At night, the opposite happens, and land surfaces lose heat more quickly than water bodies. This causes the air over the land to cool rapidly and sink, while warmer air from over the water rises to replace it. This flow of warmer air from the water is known as a land breeze. The land breeze helps to warm up the land and prevent temperatures from dropping too low.

In summary, coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water absorbs and stores heat energy, which helps to stabilize temperatures and prevent large temperature fluctuations.

To know more about Coastal cities click this link-

brainly.com/question/13850060

#SPJ11

Answer:

People often use the words “invention” and “innovation” interchangeably. This is not only incorrect but misses a few key subtleties in meaning that can change a conversation. Invention is about creating something new, while innovation introduces the concept of the “use” of an idea or method.

The reason the sun's rate of fusion must gradually rise over billions of years is because fusion is a process that requires extremely high temperatures and pressures to occur. As the sun's core converts hydrogen into helium, the helium builds up and causes the core to contract, which in turn raises the temperature and pressure. This increase in pressure and temperature allows for more fusion to occur, which leads to even more helium buildup and contraction. This cycle continues, with the core getting hotter and denser over time, until the sun reaches a point where it can no longer sustain fusion. Therefore, the gradual rise in the sun's rate of fusion is necessary for the long-term sustainability of its energy production.

Hi! The sun's rate of fusion must gradually rise over billions of years due to the following reasons:

1. Hydrogen depletion: As the sun consumes hydrogen in its core through nuclear fusion, the amount of available hydrogen decreases over time. This causes the fusion reactions to become less efficient, requiring a gradually increasing rate of fusion to maintain the sun's energy output.

2. Gravitational contraction: As the sun loses mass through fusion, its gravitational force decreases. To counterbalance this loss and maintain equilibrium, the sun contracts, increasing the pressure and temperature in its core. This causes the rate of fusion to gradually rise.

3. Helium accumulation: As fusion continues, helium accumulates in the sun's core. Helium has a higher fusion temperature than hydrogen, so as more helium accumulates, the core temperature must rise to sustain fusion reactions. This causes the rate of fusion to gradually rise over time.

In summary, the sun's rate of fusion must gradually rise over billions of years due to hydrogen depletion, gravitational contraction, and helium accumulation, which together affect the core's pressure, temperature, and fusion efficiency.

Learn more about gradually rise here:

https://brainly.com/question/23323563

#SPJ4

Numerical Dating is best used to identify when each rock type formed. Numerical Dating is the process of assigning an age to a rock in terms of numbers, usually in millions of years before present.

Numerical dating is a technique used to assign specific dates to geological events. It involves the evaluation of numerical data, such as radiometric age determinations, stratigraphic correlations, and other numerical evidence. Radiometric age determinations provide numerical data that allow geologists to assign absolute ages to specific geologic events.

This method of dating is most commonly used to determine the age of igneous rocks.
Relative Dating is best used to determine the sequence of events in the formation of rocks. Relative Dating does not assign an age to a rock, but instead it looks at the sequence of events and the relationships between different rock types. It is most commonly used to date sedimentary and metamorphic rocks.

To learn more about Numerical Dating
https://brainly.com/question/1616122
#SPJ1

True. Advection is the transfer of heat or other properties through the movement of a fluid, such as air or water. In the case of heat transfer from the equator to higher latitudes and polar regions, this is often accomplished through the advection of warm air and ocean currents towards these regions.

Advection is the transfer of heat, mass, or other properties through the motion of a fluid, such as air or water. It is different from conduction and radiation, which involve heat transfer through stationary materials or empty space, respectively.

Advection can occur in the atmosphere, oceans, or other fluids, and is often driven by differences in temperature or pressure between different regions. For example, warm air can advect towards colder regions, leading to an increase in temperature in those areas. Similarly, ocean currents can advect warm or cold water from one region to another, affecting the climate and weather patterns of those regions.

To know more about Advection here

https://brainly.com/question/18803983

#SPJ4

The right answer is option D. Assimilating everyone to a single cultural framework is NOT a reason for including cultural and linguistic competence in disaster preparedness and crisis response efforts.

The other options, A, B, and C, are all valid reasons for incorporating cultural and linguistic competence, as it helps to better serve diverse populations, reduce health disparities, and improve the overall quality of services and outcomes provided.

Linguistic competence, as used in linguistics, refers to the unconscious knowledge one possesses when speaking a language. It differs from linguistic proficiency, which refers to any other elements that enable one to use their language in practise. All facets of the organization's activities involve language. In order to facilitate communication across the organisational chart, interact with foreign partners, and ensure the use of proper language in business communication, linguistic proficiency is necessary.

To learn more about Linguistic Competence, click here:

https://brainly.com/question/28502594

#SPJ11

Answer:

Explanation:For the atmosphere, the drop in temperature of rising, unsaturated air is about 10 degrees C/1000 meters (5.5 deg F per 1000 feet) altitude. If a parcel of air is at 24 degrees C at sea level, and it rises to 1000 meters, its temperature will go down to 14 degrees C. If it goes up to 2000 meters, its temperature will go down to 4 degrees C.

4. What will its temperature be at 3000 meters?

The temperature would be minus 6 degrees C.

This rate of temperature change of unsaturated air with changing altitude is called the dry adiabatic lapse rate: the rate of change of the temperature of rising or subsiding air when no condensation is taking place (we’ll talk about the condensation part shortly).

If the air subsides, it also changes temperature. It warms up, and it is warming up at the dry adiabatic lapse rate. So, if the air at 4000 meters altitude has a temperature of -10 degrees C, and it subsides to 3000 meters, its temperature will warm up to 0 degrees C. If it continues to subside, then at 2000 meters, its temperature will be 10 degrees C.

5. What will the temperature of this air be at 1000 meters?

Its temperature would be 20 degrees C.

Make sure you notice that we are talking about moving air (rising or subsiding), not still air. The change in temperature of still air (that is, air that is not rising or subsiding) follows the environmental lapse rate, which varies considerably, but averages about 6.5 deg C/1000 meters (3.6 deg/1000 feet). In still air, if you went up in a hot air balloon, carrying a thermometer and taking the air temperature every 1000 meters, on average the temperature would drop 6.5 degrees C every 1000 meters. The rate of temperature change as you rise in still air is not as great as the rate of change of rising air; that is, the air parcel does not cool off as fast.

For instance, the air temperature at sea level is 28 degrees C. Climb into your balloon, release the tethers, and go up 1000 meters in the still air.

6. On average, what will the air temperature be at 1000 meters?

The temperature will be 21.5 degrees C.

Well, what happens is that the air will still cool off, but not as fast. If water vapor in the air is condensing, the adiabatic rate is lower. The air is only cooling off at a rate of about 5 degrees C/1000 meters (2.7 deg per 1000 feet). This is called the saturated adiabatic lapse rate (or the wet adiabatic lapse rate, or the moist adiabatic lapse rate, depending on the textbook you are using). The saturated lapse rate varies with the original temperature of the air parcel, but 5 degrees C/1000 meters is a commonly used value.

So, let’s assume a rising parcel of air reaches the lifting condensation level at 2000 meters, at a dew point temperature of 12 degrees C. At this point, clouds will form. As the air continues to rise, it will continue to decrease in temperature, but more slowly than it cooled off before condensation began.

11. What will the temperature of this parcel of air be at 3000 meters?

The temperature at 3000 meters will be approximately 7 degrees C. The saturated adiabatic lapse rate is given as 5 deg C/1000 meters, so if you go up 1000 meters, the air will cool off 5 degrees. 12-5=7.

Answer:

About 13% of Muslims live in Indonesia, the largest Muslim-majority country; 31% of Muslims live in South Asia, the largest population of Muslims in the world; 20% in the Middle East–North Africa, where it is the dominant religion; and 15% in Sub-Saharan Africa and West Africa, incl.

Explanation:

The correct answer is D. The gunflint microbiota, described by Barghoorn and Cloud, is significant because it was the first Precambrian fossil discovery, hinting at a solution to Darwin's dilemma.

It provided evidence for the existence of life on Earth at least 1.9 billion years ago, which helped to address the question of the origin of life and the evolution of complex organisms.

While it was not the first fossil find on Earth, it was one of the earliest and most important in terms of understanding the history of life on our planet. It is not just a curiosity, but a crucial piece of evidence in the study of paleontology and evolution.

To know more about Darwin's dilemma,refer to the link :

https://brainly.com/question/14353066?#

#SPJ11

Answer:

First, let's define what biotic and abiotic factors are. Biotic factors are living organisms, including plants, animals, and microorganisms. Abiotic factors, on the other hand, are non-living components such as water, sunlight, soil, and climate.

Tropical rainforests are incredibly diverse ecosystems that are home to millions of species of plants and animals. They are also incredibly important for regulating the Earth's climate and biodiversity.

Biotic factors play a crucial role in the functioning of tropical rainforests. Plants, for example, are the foundation of the rainforest ecosystem, providing the energy that fuels the entire system. They absorb sunlight and use it to photosynthesize, converting carbon dioxide and water into organic matter. This organic matter is then consumed by a variety of animals, including insects, birds, and mammals.

The animals in the rainforest also play important roles in maintaining the ecosystem. For example, some animals pollinate plants, while others disperse seeds or help to control populations of other species.

Abiotic factors are also critical to the functioning of tropical rainforests. Sunlight is perhaps the most important abiotic factor, as it provides the energy needed for photosynthesis. Water is also essential, as it is required for plant growth and plays a role in regulating the temperature of the rainforest.

Soil is another important abiotic factor, providing a habitat for a variety of organisms and acting as a nutrient source for plants. Climate also plays a significant role in the functioning of tropical rainforests. For example, the amount of rainfall and the length of the dry season can affect the types of plants that are able to grow in a given area.

In conclusion, both biotic and abiotic factors play important roles in the functioning of tropical rainforests. The diversity and complexity of these ecosystems are a testament to the intricate web of relationships between living and non-living components. By understanding these relationships, we can better appreciate the beauty and importance of these vital ecosystems.

The cross-cutting relationship best allows you to determine the age relationships between folding and faulting in a given region.

The cross-cutting relationship is a principle of relative dating that states that any feature that cuts across another feature must be younger than the feature it cuts across. In the context of structural geology, this means that any fault or fold that cuts across a rock layer must be younger than the rock layer itself. By examining the relationships between folds, faults, and rock layers in a given region, geologists can determine the relative timing of events and construct a timeline of geological activity.

The other options listed, such as the law of superposition, the law of original continuity, the principle of inclusion, and the law of original horizontality, are also principles of relative dating used by geologists to determine the relative ages of rock layers and geological events. However, these principles are less applicable to determining the age relationships between folding and faulting specifically.

Learn more about geologists here:

https://brainly.com/question/13428729

#SPJ11

Explanation:

Brazil the united states

During tectonic activity, rock layers and blocks may rotate due to the deformation of the Earth's crust. This can occur through various mechanisms such as folding, faulting, or shearing. In some cases, entire blocks of rock can rotate along a horizontal or vertical axis, causing changes in the orientation of the rock layers.

However, faults are a specific type of geological structure where there is movement along a fracture in the rock, either horizontally or vertically. Faults themselves do not rotate, but the blocks of rock on either side of the fault may move relative to each other, resulting in changes in the of the rock layers on either side of the fault.

It's important to note that there are some cases where faults may appear to rotate due to changes in the orientatorientation ion of the surrounding rock layers. This can occur when the fault is located at an angle to the direction of the deformation, causing the rock layers on either side of the fault to rotate slightly as they are squeezed or stretched. However, the fault itself remains fixed in place.

Learn more about geological here

https://brainly.com/question/5634603

#SPJ11

a) The size of sediment grains carried by ocean water is directly related to the energy of the water. When the water is moving at a high velocity, it can carry larger sediment grains because it has more energy to overcome the frictional forces that keep the grains in place. Conversely, slower-moving water can only carry smaller sediment grains because it doesn't have enough energy to move larger ones.

b) Mapping the grain sizes of sediment that has settled onto the seafloor can provide valuable information about the history and dynamics of ocean currents. For example, if the sediment is composed mostly of fine-grained particles, it suggests that the water was moving slowly when it was deposited. On the other hand, if the sediment contains a mixture of fine and coarse-grained particles, it suggests that the water was moving at varying velocities.

By studying the distribution of sediment grain sizes, oceanographers can learn about the intensity and direction of ocean currents in the past and present, and use this information to make predictions about future oceanographic events.

To know more about sediment grains refer here:

https://brainly.com/question/29220733#

#SPJ11

The presence of trilobites in a slab can provide information about the age and paleoenvironmental setting of the rock, which could be anywhere between the Early Cambrian and the end of the Permian period.

How to determine the presence of trilobites in a slab tell us about its age and paleoenvironmental setting?

If trilobites were found in a slab, the age of the slab would depend on the specific species of trilobite present.

Trilobites lived from the Early Cambrian period, which began around 541 million years ago, until the end of the Permian period, which ended around 252 million years ago. So, the age of the slab could be anywhere within that time range.

Other fossils that might be found from this era include brachiopods, crinoids, and ammonites. These were all common marine organisms that lived during the same time as the trilobites.

The paleoenvironmental setting of the slab would likely be a marine environment, as trilobites were primarily marine organisms.

However, the specific conditions would depend on the age and location of the slab. For example, during the early Cambrian period, the paleoenvironmental setting would have been vastly different than during the Permian period.

Learn more about trilobites

brainly.com/question/27329190

#SPJ11