For your experiment in part B, which factors would you keep constant?
Heating Different Amounts of a Substance

Answers

Answer 1
you would keep the substance the same and the temperature you are heating to the same. the only thing you would change is how much (or the amount) that you are heating.
for instance, say if you were to be heating sodium nitrate to 33K.
you would keep those two the same, but you would change the mass of sodium nitrate to 0.5g , 1g, 5g etc
hope this helps!

Related Questions

which ph value is consistent with the indicator results

Answers

The color of the indicator will correspond to the pH values of either acidic or basic substances.

What are pH values and Indications?

pH values are values which are obtained from taking the negative logarithm to base ten of the hydrogen ions concentration of a substance.

pH values of acidic substances are less than 7 while the pH of basic or alkaline substances are greater than 7.

An indicator is an organic dye which changes colour according to the pH of a substance.

Examples of indicators are methyl orange and phenolphthalein.

Therefore, the color of the indicator will correspond to pglh values of either acidic or basic substances.

Learn more about indicators at: https://brainly.com/question/1918667

#SPJ1

3. Convert these volumes to liters:

a. 320 mL

b. 948 mL

c. 1834 mL

d. 3267 mL


4. Convert these volumes to milliliters:

a. 0.75 L

b. 0.28 L

c. 1.32 L

d. 2.4 L

Answers

3. a) 320 mL x 1 L/1000 mL = 0.320 L
b) 948 mL x 1 L/1000 mL = 0.948 L
c) 1834 mL x 1 L/1000 mL = 1.834 L
d) 3267 mL x 1 L/1000 mL = 3.267 L

4. a) 0.75 L x 1000 mL/1 L = 750 mL
b) 0.28 L x 1000 mL/1 L = 280 mL
c) 1.32 L x 1000 mL/1 L = 1320 mL
d) 2.4 L x 1000 mL/1 L = 2400 mL

Balance the following reactions:'

Mg(OH)2 + HCl ➡️ H2O + MgCl2

Ca(ClO3)2 ➡️ CaCl2 + O2


Ca(NO3)2 + ➡️ KBr CaBr2 + KNO3

Al + HCl ➡️ AlCl3 + H2

C2H6 + O2 ➡️ CO2 + H2O

Answers

[tex]2 HCl + Mg(OH)_2[/tex] → [tex]2 H_2O + MgCl_2[/tex]

[tex]3 Ca(ClO)_2[/tex] → [tex]2 CaCl_2[/tex] + [tex]Ca(ClO_3)_2[/tex]

[tex]2 KBr + Ca(NO_3)_2[/tex] →[tex]2 KNO_3 + CaBr_2[/tex]

[tex]2Al +6HCl[/tex] → [tex]2AlCl_3 +3H_2[/tex]

[tex]2C_2H_6+7O_2[/tex] → [tex]4CO_2+6H_2O.[/tex]

What is a balanced chemical equation?

A balanced chemical reaction is an equation that has equal numbers of each type of atom on both sides of the arrow.

Balanced chemical equation:

[tex]2 HCl + Mg(OH)_2[/tex] → [tex]2 H_2O + MgCl_2[/tex]

[tex]3 Ca(ClO)_2[/tex] → [tex]2 CaCl_2[/tex] + [tex]Ca(ClO_3)_2[/tex]

[tex]2 KBr + Ca(NO_3)_2[/tex] →[tex]2 KNO_3 + CaBr_2[/tex]

[tex]2Al +6HCl[/tex] → [tex]2AlCl_3 +3H_2[/tex]

[tex]2C_2H_6+7O_2[/tex] → [tex]4CO_2+6H_2O.[/tex]

Learn about the balanced chemical equation here:

https://brainly.com/question/24245953

#SPJ1

David runs a 100-m dash while pushing a stroller with a force of 25N. What amount of work does David do on the stroller?

Answers

David runs a 100-m dash while pushing a stroller with a force of 25N.  The work done by David is 2500 Nm.

What is force?

Force is a power that changes the motion of the object.

The displacement is 100 m

The force is 25 N

Work done = force x displacement

25 x 100 = 2500 Nm

Thus, the work done by David is 2500 Nm.

Learn more about force

https://brainly.com/question/13191643

#SPJ1

requires temperatures of millions of degrees K

Answers

Atomic fission is the one

(Use P_T for total pressure; P_water vapor for water vapor pressure; P_hydrogen gas for hydrogen gas pressure)

Answers

From the Dalton's law of partial pressures, the pressure of the hydrogen gas is 91.83 kPa.

What is partial pressure?

In a mixture of gases, the total pressure is the sum of the pressures of the individual gases in the mixture according to the Dalton's law of partial pressures.

In this case, the partial pressure of the hydrogen gas is Phydrogen, the partial pressure of water is Pwater and the total pressure is PT.

Hence;

Phydrogen = PT - Pwater

95 - 3.17 = 91.83 kPa

Learn more about partial pressure:https://brainly.com/question/14281129

#SPJ1

Which organisms are producers?

Choose all correct answers.


tree

grass

monkey

mold

Answers

Answer: Tree and Grass are the two correct answers here

Explanation:  Producers are photosynthesizing organisms. They are any kind of green plant that make their food by taking sunlight and using the energy to make sugar.

Answer:

Tree, grass

Explanation:

Producers make their own food. Trees and grass can make their own food using sunlight (photosynthesis). Monkey is consumer (eats other things like bananas- made by plants - for survival). Mold (like fungus) eat dead stuff and thus are decomposers (not producers).

What is the IUPAC name

Answers

HCl(acid)+C₄H₈ (butene)⇒ addition reaction

name of the product: 2-cloro butane

7
10 points
how many moles of nitrogen gas will occupy a volume of 0.347 l at 7.0 atm and 300 k?
"do not include a unit with your answer, just type in the number!
type your answer..
previous

Answers

Answer:

.0987 moles

Explanation:

Ideal gas law     PV = n RT       R = .082057 L-atm/mol-K

7 ( .347) = n (.082057) (300)       n = .0987 moles

A drinking glass and a tightly sealed jar sit on the kitchen counter. both are half-filled with water and are undisturbed for several hours. will the liquid and water vapor establish equilibrium in either container? explain your answer

Answers

A tightly sealed jar will form liquid and water equilibrium but the drinking glass will not.

Will the liquid and water vapor establish equilibrium in either container?

The liquid and water vapor establish equilibrium in a tightly sealed container but not in the drinking glass because in the tightly sealed jar, the water can't go into the atmosphere but in the drinking glass the water will evaporate.

So we can conclude that a tightly sealed jar will form liquid and water equilibrium but the drinking glass will not.

Learn more about equilibrium here: https://brainly.com/question/517289

#SPJ1

how do you complete chemical equations?
Ca+O2 →

Answers

[tex]2\text{Ca} + \text{O}_2 \rightarrow 2\text{CaO}[/tex]

formation of water: 2H2 + 1 O2 --> 2H2O
How many moles of H2O can be produced from 35 grams of O2?

Answers

Answer:

2.2 moles H2O

Explanation:

[tex]35g O_2 \mbox{ \cdot }\frac{1mol}{32g/mol} \mbox{ \cdot }\frac{2mol H_2O}{1mol O_2}= 2.1875[/tex], which rounds to about 2.2

Body systems often interact with each other. The image below shows parts of body systems that interact to fulfill a function for the body.



Which statement describes how the body systems in the image work together to perform a common function

Answers

According to the research, the body systems work together to perform a common function through the coordination of endocrine substances and nerve impulses.

What are the body systems?

They are the different sets of organs that make up the body, collaborating in each case with the fulfillment of some specific type of functions.

This simultaneous and juxtaposed set of systems involves various organs, ducts, tissues and various glands, all coordinated by endocrine substances and nerve impulses, so as to operate more or less autonomously as the case may be.

Therefore, we can conclude that according to the research, the body systems work together to perform a common function through the coordination of endocrine substances and nerve impulses.

Learn more body systems here: https://brainly.com/question/19704422

#SPJ1

If 100.0g of nitrogen is reacted with 100.0g of hydrogen, what is the excess reactant? What is the limiting reactant? Show your work.

Answers

Compare the number of moles you have of each element. The element with more moles will be the excess reactant since some will be leftover after it reacts with the limiting reactant.

30. Which of the following substances would depress the freezing point of pure water the most?
a.
NaCl
c.
C6H12O6
b. MgCl₂
d.
K3PO4

Answers

Answer:

D. K3PO4

Explanation:

K3PO4 would dissolve into 3 potassium ions and one phosphate ions thus total of 4 items added in water. Freezing point is depressed by high amounts of stuff. NaCl would add 2 items (one Na and one Cl). Glucose would not break apart, thus 1 item. MgCl2 would break into One Mg and two Cl ions (thus 3 things.)..

Overall, K3PO4 dissolves into most components, thus would depress the freezin point most.

ii. If the pressure after landing was 1.0 atm, what was the volume of the passenger's collapsed water bottle? (Assume the bottle collapsed easily and temperature didn't change.) (6 points)

Answers

Using the ideal gas equation and Gay Lussac's law, the volume of the passenger's collapsed bottle after landing is 0.0075 L.

What is ideal gas equation?

The ideal gas equation shows the relationship between temperature, pressure, volume and number of moles.

The volume of the passenger's collapsed bottle after landing is 0.0075 L.

Given that;

PV = nRT

P = gas pressureV = volume of gasn = number of moles of gasR = molar gas constantT = temperature

n = PV/RT

Hence:

P = 0.75 atm;

V = 0.5 L;

T = 295 K;

R = 0.082 atmL/K.mol

n = 0.75 * 0.5 / 0.082 * 295

n = 0.015 moles

If the pressure after landing was 1.0 atm;

V1n1 = V2n2

V2= V1n1/n2

V2 = 0.5 L *  0.015 moles/ 1 mole

V2 = 0.0075 L

The volume of the passenger's collapsed bottle after landing is 0.0075 L.

Missing parts;

A passenger on an airplane finished a 0.5 L bottle of water during the flight

and replaced the lid. The cabin pressure and temperature were maintained at

0.75 atm and 295 K during the flight. After landing, he noticed his empty water

bottle had collapsed. (12 points)

i. How many moles of gas were in the water bottle?

Learn more about  ideal gas equation: https://brainly.com/question/4147359

#SPJ1

Select the correct answer. which element can bond with titanium (ti) to form a polar covalent bond? a. beryllium (be) b. fluorine (f) c. manganese (mn) d. nitrogen (n) e. oxygen (o)

Answers

The element that can bond with titanium (Ti) to form a polar covalent bond is Nitrogen (N).

What is a Covalent Bond?

In this type of bond, the atoms of the element share only one electron. As an example, we can mention the chlorine gas Cl2, in which the two chlorine atoms share an electron to achieve chemical stability.

Hence, we can see that to bond with Titanium, there needs to be an element that would form a polar covalent bond and this is Nitrogen and this is because of their electronegativity difference.

See more about covalent bonds at brainly.com/question/12732708

#SPJ4

please help

Tare the balance. Place the wooden block on
the pan, and record the block's mass below. g

Answers

Answer:

the first question's answer is 10.7g and the follow up question is 47.7g.

Explanation:

it makes you drag the object onto the scale and then displays it on the green rectangle.

(pls help!) What mass of oxygen atoms is required to react completely with 30 u of hydrogen atoms?​

Answers

2H_2+O_2—»2H_2O

One mole Hydrogen need 1/2mol O_2 .

Moles of Hydrogen

30u/1u30mol

Moles of O_2

30/215mol

[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]

Let's get to the reaction first ~

[tex] \qquad \qquad \rm 2H_2 + O_2 \rightarrow 2H_2O[/tex]

Here, we can infer that if we need 1 mole oxygen gas to react with 2 moles Hydrogen gas.

So, the number of Oxygen gas molecules we need to react should be half the number of Hydrogen gas molecules.

Number of Hydrogen gas molecules is :

[tex]\qquad \sf  \dashrightarrow \: \dfrac{30}{2} [/tex]

[tex]\qquad \sf  \dashrightarrow \: 15[/tex]

Number of Oxygen gas molecules needed is :

[tex]\qquad \sf  \dashrightarrow \: \dfrac{15}{2} [/tex]

Number of Oxygen atoms needed :

[tex]\qquad \sf  \dashrightarrow \: \dfrac{15}{2} \times 2[/tex]

[tex]\qquad \sf  \dashrightarrow \: {15} \: atoms[/tex]

One atom of Oxygen weight 16 u, so 15 atoms weight ~

[tex]\qquad \sf  \dashrightarrow \: {15} \times 16[/tex]

[tex]\qquad \sf  \dashrightarrow \: 240 \: u[/tex]

So, we need 240 u of Oxygen atoms to react completely with 30 u of Hydrogen atoms.

According to Newton's second law of motion, a larger force acting on an object causes a greater(..................................) of that object

Answers

Answer:

acceleration

learnt this in 8th grade

acceleration

Newton's second law : F = m.a

F proportional to m and a

F > than a >

what is 750 grams of phosphorus

Answers

Answer:

750 g of phosphorus is 750 g of phosphorus

In the space below draw a model of the atoms that make up a water molecule to show the charges of each of these atoms chemistry

Answers

Answer:

I didn't draw this but I think they're asking you to draw this

Explanation:

What kinds of solute particles are present in water solutions of electrolytes and no electrolytes?

Answers

Ion particles are present in water solutions of electrolytes while neutral molecules are present in case of non electrolytes.

What are electrolytes?

Electrolytes are compounds that dissociate into ions when dissolved in a solution, resulting in the solution becoming conductive to electricity. These substances are usually made up of ionic compounds or acids that dissolve in water, producing positively and negatively charged ions. These ions can move freely within the solution and transport electric charge, thereby transforming the solution into a conductor of electricity.

What type of solute particles exist in water solutions of electrolytes?

When we talk about water solutions of electrolytes, it's important to note that the solute particles are present in the form of ions. These ions are essentially atoms or molecules that have a net electric charge as a result of gaining or losing electrons. The presence of these charged particles allows for conductivity within the solution, making them capable of carrying an electric charge. Some common examples of electrolytes include table salt (also known as sodium chloride), acids, and bases.

What type of solute particles exists in water solutions of non electrolytes?

When it comes to solutions in water that contain non-electrolytes, the solute particles are made up of neutral molecules or compounds that lack an overall electric charge and therefore, cannot facilitate electrical conductivity within the solution. Sugar, alcohol, and urea are a few examples of non-electrolytes.

To know more about electrolytes, click here

https://brainly.com/question/29771118

#SPJ1

the weather patterns seen on earth are influence greatly by

Answers

Answer: The butterfly effect

Explanation:

solar radiation, the amount of which changes with Earth's tilt, orbital distance from the sun and latitude, temperature, air pressure and the abundance of water.

Suppose much of an old forest will be used for farmland. A certain portion of the land will be set aside as wildlife habitat. You are asked to chose between the two plans outlined in A and B. The green areas represent the proposed reserve areas. Which plan will you recommend? Explain your reasoning.

Answers

Answer:

A certain portion of the land will be set aside as wildlife habitat

Explain how each property affects the energy in a wave:
Amplitude:
Wave speed:
Wavelength:
Frequency:

Answers

Answer:

frequency

Explanation:

because a wave is equally a frequency

ILL GIVE A BRAINLY PLS HELP

1.) How many O atoms are present in 5.00 moles of H2O?

a.)
3.01x1024 atoms

b.)
3.01 atoms

c.)
5 atoms

d.)
6.02x1024 atoms


2.) A sample of CO2 contains 1.8x1024 molecules. How many moles of carbon dioxide are in this sample?

a.)
6.02x1023 mol

b.)
3 mol

c.)
1.8 mol

d.)
3x1024 mol

Answers

Atoms are the unit of the molecule of the compound. The 3.01 x 10²⁴  atoms of oxygen are present in 5 moles of water and 3 moles of carbon dioxide in the sample.

What are atoms?

Atoms are the smallest fundamental unit of the compounds that can be given by Avogadro's number.

For calculating the oxygen atoms in 5 mole water:

If 1 mole = 6.02 × 10²³

Then, 5 moles = 5 ×  6.02 × 10²³

Hence, 3.01 x 10²⁴ atoms of oxygen are present in 5 moles of water.

Moles of carbon dioxide in the sample is calculated as:

If 1 mole of carbon dioxide = 6.02 × 10²³ molecules

Then moles in 1.8 x 10²⁴ molecules will be,

(1.8 x 10²⁴ molecules) ÷ (6.02 × 10²³ molecules)  = 3 moles

Hence, 3 moles of carbon dioxide is present in the sample.

Learn more about Avogadro's number here:

https://brainly.com/question/5098076

#SPJ1

what happens when you mix hydrogine, potassium and sodium

Answers

Answer:

-

Explanation:

As the piece of metal skitters across the surface of the water in a beaker and — particularly in the case of potassium — it appears to catch fire, it is not obvious that the explanation for both phenomena lies in the production of hydrogen gas.

Describe polar and nonpolar molecules

Answers

Answer:

Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.

Explanation:

hope it's helps

Use the equation to answer the prompt. A student claims that the equation models beta-minus decay because the atomic number of the nucleus decreases by one. In one or two sentences, explain the error in the student's reasoning.

Answers

The error in the student's reasoning happened as they get confused between the beta minus decay and beta plus decay.

What is beta minus decay?

A neutron is converted into a proton in beta minus, increasing the atomic number of the atom.

The proton is positive, while the neutron is neutral. The nucleus also produces an electron and an antineutrino in order to ensure charge conservation.

In the given question beta minus decay is not occur as atomic number of the daughter nuclei does not increases. Rather than this in the given decay atomic mass of the daughter nuclei is less than the parent nuclei means plus beta decay is happened there.

Hence the error is in predicting the correct particle with charge.

To know more about beta decay, visit the below link:

https://brainly.com/question/11117468

#SPJ1

Other Questions
There are 24 students in a class and a decrease of 15%. How many students would you have? Identify two ways that Bitcoin, and other cryptocurrencies, is different from most forms of money? What is the mass of a ball that has 29j of potential energy and is lifted 2.0m? Which statements about the cone are true? check all that apply. the radius is double the diameter. the radius is 9 mm. the base area is calculated using the radius. the volume is one-third the volume of a cylinder with the same height and diameter. the volume of the cone is 297 pi millimeters cubed. whAT IS THE ELEMENTS FOR THE EQUATION OF DENSITY? Why is a tightly condensed shape ofDNA needed for cell division?A. to move it more easilyB. tmallow gene accessC. to be replicatedD. to keep it in the nucleus PLEASE ANSWER I ONLY HAVE 20 MINUTES TO TURN IN THIS TEST PLS ILL GIVE SO MANY POINTS PLSProfessor Perry is interested in testing whether the amount of time a person spends with children affects his or her attitudes toward having children of their own. She randomly chooses a sample and randomly assigns them to one of two groups. Group 1 spends 5 hours a day for a week with a group of children. Group 2 spends 1 hour a day for a week with the same group of children. At the end of the week, Professor Perry measures their attitudes with a survey. Write an essay about this study that answers the following questions: A What type of research study did Professor Perry use? (for example, case study, naturalistic observation, correlation, or experiment) B What was the independent variable in the study? C What was the dependent variable in the study? D How did Professor Perry operationally define the dependent variable in the study? E Also, please discuss any potential ethical considerations for this research. What is the area of this shape? See Colonel Sartoris. (Colonel Sartoris had been dead almost ten years.) I have no taxes in Jefferson. Tobe! The Negro appeared. Show these gentlemen out.Answer choices for the above questionA. Emily is trying to cheat the tax system because she doesn't have enough money to pay.B. Emily has become a recluse and does not understand that the town has changed.C. Emily cannot find out that Colonel Sartoris has died, or she will go completely mad.D. Emily killed Colonel Sartoris and is trying to deflect any suspicion by pretending she thinks he is alive. These points are linear. Find the slope. what is the difference between muscular strength and endurance? You have a job that pays $25.00 for each day you show up, plus $19.00 per hour. Which expression shows the amount you make in one day if you work for h hours?H E L P PLEASE ASAP Investigate the meaning of "child marriage"and state two reasons why child marriage is prevalent Which of the following statements about turning points in environmental policy is true?a.Environmental policy has changed over time as a result of pressure from industry.b.Turning points in environmental policy were typically the result of urban expansion.c.Turning points in environmental policy have come about through increased public awareness.d.Environmental policy has changed little over the history of the United States.Please select the best answer from the choices providedABCD The mountainous geography of the Andes region led to the development ofwhich agricultural technique?OA. Using melted snow to irrigate cropsB. Cutting terraces into hills for farmingC. Growing cacti that require little waterD. Herding animals rather than growing crops Did Anna have a good relationship with her Math teacher before she went into hiding? How do you know? What is the reason food molecules arent in Hydroponic plant food In your own word and drawing from your experience as teacher, explain why a person such as darling-Hammond(2006) perceives teaching as more complex than law,medicine, or engineering The type of hemodialysis that is performed for ESRD, typically three times a week, may be documented as:A. Intermittent hemodialysisB. Peritoneal dialysisC. Prolonged intermittent renal replacement therapyD. Continuous renal replacement therapy According to the Official Coding Guidelines for ICD-10-CM, Chapter 13, Diseases of the Musculoskeletal System and Connective Tissue, contains codes for all of the following conditions except for which one?A. Acute traumatic musculoskeletal injuriesB. Conditions that are the result of a previous injuryC. Recurrent musculoskeletal conditionsD. Chronic musculoskeletal conditions