For water, the value for the latent heat of vaporization is 6.8 times greater than the latent heat of fusion. Imagine we were adding heat at a constant rate to a block of ice in a beaker on a hot plate, and it took 4 minutes for the ice to melt completely. How long would it take, after the water started boiling, for the beaker to be completely empty (the liquid water totally converted to water vapor)?

Answers

Answer 1

Answer:

Time of vaporization = 0.588 minutes

Explanation:

The latent heat of fusion is the heat required to change the substance from solid (ice) to liquid completely, without further increase in temperature.

The latent heat of vaporization is the heat required to change a liquid to gas completely, without an increase in temperature.

Latent heat of vaporization = 6.8 times Latent heat of fusion

This means that the time it takes for the latent heat of vaporization to complete vaporization is 6.8 times lesser than the time it takes for the latent heat of fusion to complete fusion

Time of vaporization = 6.8 times lesser than time of fusion

Time of vaporization = (time of fusion) ÷ 6.8

where: Time of fusion = 4 minutes

∴ Time of vaporization = 4 ÷ 6.8

Time of vaporization = 0.588 minutes


Related Questions

How many calories are required to convert 2 grams of ice at 0 degrees C to water vapor at 100 degrees C?

Answers

Answer:

360.8987 GRAM CALORIE OR 0.3608987 KILOCALORIE IS THE CALORIE REQUIRED TO CONVERT 2 GRAMS OF ICE AT 0 DEGREES C TO WATER VAPOUR AT 100 DEGREES C.

Explanation:

To convert 2 g of ice at 0 C to water vapor at 100 C:

First, the ice will be converted to water at 0 C

Then, water at 0 C to water vapor at 100 C

We must know that the latent heat of fusion for ice is 3.35*10^5 J/kg

the standard heat of enthalpy of water = 4200 J/kg

So therefore

Total heat to convert ice at 0 c to water vapor at 100 c is:

= M Lf + mc Q

= 2/ 1000 * 3.35 * 10^5 + 2/1000 * 4200 * (100 -0)

= 0.002 * 3.35 ^ 10^5 + 0.002 * 4200 * 100

= 0.0067 * 10 ^5 + 840

= 670 + 840

= 1510 J

The heat required to convert 2 g of ice at 0 c to water vapor at 100 C is 1510 J and to get the calorie value we divide the answer in joules by 4.184.

1510 joules = 360.8987 gram calories or 0.3608987 kilocalorie.

Amount calories are required to convert into vapor is 1,440 calories

Latent heat of water:

Given that;

Amount of ice = 2 grams

Latent heat of water = 540 calorie

Find:

Amount calories are required to convert into vapor

Computation;

Heat required to melt at 0°C to water at 0°C = 2 × 80

Heat required to melt at 0°C to water at 0°C = 160 calorie

Water from 0°C to 100°C = 2 × 100

Water from 0°C to 100°C = 200 calorie

Water from 100°C to 100°C vapor = 2 × 540

Water from 100°C to 100°C vapor = 1,080 calorie

Amount calories are required to convert into vapor = 160 + 200 + 1080

Amount calories are required to convert into vapor = 1,440 calories

Find out more information about 'Latent heat'.

https://brainly.com/question/87248?referrer=searchResults

5(3x) - 7y2=?, when x = 3 and y= 2

Answers

Answer:

This might help u......

5(3•3) - 7•2•2
1. 5•9-7•4
2. 45-28 =17
Answer: 17

A black compound reacts with acid to give a blue green solution. Name the compound. Write the reaction​

Answers

Answer:

compound is CuO.

Explanation:

rxn:

CuO + 2HCl = CuCl2 (Blue green color) + H2O

which part of a plant conducts food and water to different part of it?​

Answers

Answer:

stem is the correct answer

Explanation:

mark as me brainlist

convert 500 inches to m.
1000mm =1m
1inch = 2.54 cm
10mm=1cm

Answers

Answer:

12.7m

Explanation:

FORMULA  

for an approximate result, divide the length value by 39.370078

What must happen for a natural resource to become a synthetic material?(1 point) It needs to go through a chemical reaction. It needs to be pounded very thin. It needs to be dried out. It needs to go through a phase change.

Answers

Answer:

It needs to go through a chemical reaction

Explanation:

Natural resources undergoes chemical reaction to become synthetic materials.

Natural material undergoes several chemical changes to chnage the characterstics of the resources into synthetic material.

Some examples of synthetic materials are medicines, plastics, and new fuels which are extracted from trees or plants, natural fibers, and petroleum.

Hence, the correct option is "It needs to go through a chemical reaction".

Answer:

It needs to go through a chemical reaction.

Constants (“controlled variables”) and a control are easily confused by students! How would you explain the difference between the two words?

Answers

Answer:

Please find the explained difference below

Explanation:

In a scientific experiment, the CONTROLLED VARIABLE, also known as CONSTANT, is the the variable that is kept unchanged by the experimenter throughout the course of the experiment. The constants are not part of the actual experiment but altering them can influence its outcome.

A control group is one of the two groups in an experiment (the other being experimental group) that doesn't receive the variable being manipulated (independent variable). The control group is the same as the experimental group except that the independent variable is unchanged in the control group. It is used to make a comparison with the experimental group.

For example, in an experiment to test the effect of sunlight on plant growth. Some plants were exposed to sunlight while some were placed in the dark. The CONTROL group of this experiment are the plants placed in the dark (no light). They didn't receive any treatment.

The constants of this experiment can be same amount of water, same type of plants used etc. This is done in order not to affect the outcome of the experiment.

True or False ... In a chemical change, a new
substance is formed.

Answers

The answer is true the answer has to be 20 words long so true true true true true true

In the 18th century, Italian biologist Lazzaro Spallanzani designed an experiment supporting the hypothesis that gastric juices are partly responsible for digesting food. Which human illness did Spallanzani's work eventually shed light on? intestinal ulcers mouth ulcers stomach ulcers skin ulcers

Answers

Stomach ulcers, I've read it online and I take the test

In the 18th century, Italian biologist Lazzaro Spallanzani designed an experiment supporting the hypothesis that gastric juices are partly responsible for digesting food. The human illness which Spallanzani's work eventually shed light on Stomach ulcers.

What is pH ?

pH is used to measure whether the substance is acidic, basic or neutral and the range is 0 - 14.

What is Gastric acid ?

Gastric acid is also called gastric juice or stomach acid it is made up of water, enzymes, hydrochloric acid, electrolytes. The pH of gastric acid is between 1 and 3 that means it is acidic is nature.

Thus from the above conclusion we can say that In the 18th century, Italian biologist Lazzaro Spallanzani designed an experiment supporting the hypothesis that gastric juices are partly responsible for digesting food. The human illness which Spallanzani's work eventually shed light on Stomach ulcers.

Learn more about the pH here: https://brainly.com/question/24595796

#SPJ2

explain why the planet Venus rotates the opposite way?

Answers

Answer:

The reason why it rotates the opposite way is due to an asteroid collision forcing the planet to spin backwards and is also the reason why a day on Venus is longer then a year on Venus

it spins in the same direction it always has, just upside down, so that looking at it from other planets makes the spin seem backward

Explain The process of a pot of boiling water left for to long drying up.

Answers

Answer:Evaporation

Explanation:

The scientific method is "flexible". What does that mean? Why is that
important and necessary?

Answers

Answer:

we can reach the same conclusions by applying different experimental and observational procedures

Explanation:

The scientific method is a process that can be summarized in the following steps: 1-to raise a question, 2-to make a hypothesis, 3-to obtain data from observations and/or experiments, and finally, 4-to obtain conclusions that enable to confirm (or reject) the hypothesis. The scientific method is flexible because it is not necessary to follow 'stringent' guidelines in order to reach the same conclusions. In consequence, the predictions derived from such results can be tested again to determine the veracity of the results.

Electronic configuration of 11N

Answers

Answer:

The Electronic configuration of 11N is

[Ne]3s1

Look at the four chemical reactions. Reaction 1: 2H2 + O2 → 2H2O Reaction 2: 2NaCl → 2Na + Cl2 Reaction 3: CaO + H2O → Ca(OH)2 Reaction 4: 4Fe + 3O2 → 2Fe2O3 Which statement identifies the reaction that is different from the rest and explains correctly why it is different? (1 point) Reaction 2, because a single reactant is decomposed Reaction 1, because two reactants have decomposed Reaction 2, because a single ion is replaced in a compound Reaction 1, because two ions have interchanged their positions

Answers

Answer:

Reaction 2, because a single reactant is decomposed

Explanation:

It's the only one where the product was decomposed while the others became one. I took the quiz and it was correct.

How you could use the scientific method to learn whether water really does take longer to boil if you are watching it.

Answers

Answer:

What you need is a thermometer and a clock.

Explanation:

uestion 3 (1 point)
1. Calculate the density of a liquid that has mass of 14.0g and volume of 18.0 cm? Will this liquid float on
top of water or will it sink? (Density of water is 1.0 g/mL)
I

Answers

formula for density of liquid = mass ÷ vol

= 14.0 g ÷ 18.0 cm³

= 0.77778 g/cm³ ( 5sf)

= 0.778 g/cm³ ( 3sf )

18.0 cm³ is the same as 18.0 ml

Therefore, the liquid will float on water as the water is denser than the liquid.

18.0 cm³ is equivalent to 18.0 ml, in light of the fact that water is denser than liquid, the liquid will float on it.

What is the density of a liquid?

Density is defined as d = M/V, where M stands for mass and V for volume. The unit of density that is most frequently used is grams per cubic centimeter.

The formula for liquid density is mass divided by volume.

= 14.0 g ÷ 18.0 cm³

= 0.77778 g/cm³

= 0.778 g/cm³

The same procedure used to determine a solid's density is used to determine a liquid's density. Calculate the fluid's mass, then its volume, then divide mass by volume.

To determine the fluid's mass, weigh the fluid in the container, pour it out, weigh the empty container, and then subtract the empty container's mass from the mass of the filled container.

Therefore, in light of the fact that water is denser than liquid, the liquid will float on it.

Learn more about density, here:

https://brainly.com/question/4223759

#SPJ2

A block of aluminium occupies a volume of 11.1 mL and weighs 43 g. What is it's density? Give answer with one decimal.

Answers

Answer:

Density = 3.9 g/ mL

Explanation:

The density of a substance can be found by using the formula

[tex]Density = \frac{mass}{volume} [/tex]

From the question

mass = 43 g

volume = 11.1 mL

Substitute the values into the above formula and solve for the density

That's

[tex]Density = \frac{43}{11.1} \\ = 3.873873...[/tex]

We have the final answer as

Density = 3.9 g/ mL to one decimal place

Hope this helps you

Express in scientific notation.
1.24 x 10^6/
6.2 x 10^-3

Answers

Answer:

1.24*10^6=1.24*1000000=1240000

6.2*10^-3=6.2*0.001=0.0062

Explanation:

Hope it is helpful for you

please follow me

and mark me as a brainest

2. A 90 g bag of trail mix is contains 22% nuts, 35% granola, 18% dried fruit. The rest is chocolate chips.
Calculate how many grams of each component there is.
nute

Answers

There are:

19.8g of nuts (90x0.22=19.8)
31.5g of granola (90x0.35=31.5)
16.2g of dried fruit (90x0.18=16.2)
22.5g of chocolate chips (90x0.25=22.5)

What is it known as

Answers

Answer:

Some of the most incredible discoveries in science were made because the data looked wrong! Once you have the data, you may need to perform a mathematical analysis to support or refute your hypothesis. Conclusion Conclude whether to accept or reject your hypothesis. There is no right or wrong outcome to an experiment, so either result is fine.

it’s known as the conclusion

What happens when an X-ray is shot at an atom

Answers

Answer: X-ray fluorescence from atoms occurs when a high energy particle or X-ray knocks an electron free from the innermost energy level of an atom, creating an unstable atom.

Explanation:

Several interactions can happen when an atom is exposed to an X-ray, depending on the energy of the X-ray and the properties of the atom.

The most frequent interaction is referred to as the photoelectric effect, in which an X-ray photon collides with an atom's inner-shell electron to evict it from its orbit and ionize the atom. As a result, an ion and a free electron are created. Another potential interaction is Compton scattering, in which an outer-shell electron receives some of the energy from the X-ray photon and is expelled at a different angle with less energy as a result. Additionally, pair production, which results in the formation of an electron-positron pair, can happen at very high energies. In many applications, these interactions are crucial.

To know more about high energies, here

brainly.com/question/32223681

#SPJ2

Crystal structures with ions must have ____________.a. a positive chargeb. a negative chargec. electrical neutralityd. a 2+ charge

Answers

Answer:

c. electrical neutrality.

Explanation:

A crystalline  solid possesses a rigid and long-range order; its atoms, molecules, or ions occupy  specific positions. The arrangement of such particles in a crystalline solid is such that  the net attractive intermolecular forces are at their maximum.

Ionic crystals, particularly, have two important characteristics:

(1) They are composed of charged species.

(2) Anions and cations are generally quite different in size.

The forces holding the atoms together are electrostatic attractions. Examples of these types of crystals include NaCl, LiF, MgO, CaCO₃.

Since they are composed of anions and cations, in stoichiometric amount, they are to be said electrically neutral.

Bombardier beetles inject boiling hydrogen peroxide, or H2O2, into the victims. It then decomposes into hydrogen and oxygen gas. How many grams of oxygen can be produced if 0.128 grams of hydrogen peroxide are decomposed?

Answers

Answer:

0.12 g of O2.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

H2O2 —> H2 + O2

Next, we shall determine the mass of H2O2 that decomposed and the mass of O2 produced from the balanced equation. This is illustrated below:

Molar mass of H2O2 = (2×1) + (16×2)

= 2 + 32

= 34 g/mol

Mass of H2O2 from the balanced equation = 1 × 34 = 34 g.

Molar mass of O2 = 16×2 = 32 g/mol

Mass of O2 from the balanced equation = 1 × 32 = 32 g

Summary:

From the balanced equation above,

34 g of H2O2 decomposed to produce 32 g of O2.

Finally, we shall determine the mass of O2 produced from the decomposition of 0.128 g of H2O2. This can be obtained as follow:

From the balanced equation above,

34 g of H2O2 decomposed to produce 32 g of O2.

Therefore, 0.128 g of H2O2 will decompose to produce = (0.128×32)/34 = 0.12 g of O2.

Therefore, 0.12 g of O2 was produced.

Calculate the density from the following information: A red block had a mass of 15.7 g. It was placed into a graduated cylinder containing 10.0 mL of water. The volume then rose to 17.2 mL when the block was added.

Answers

Answer:

Density should be 8.5

Explanation:

When you subtract 17.2-10.0 for water displacement you get 7.2 which is the volume and you divide it by 15.7 so your equation will be 15.7/7.2 = 8.5

Answer:

4.1

Explanation:

Isabella wants to determine the mass of a metal block what is the SI unit for mass

Answers

Answer:

Kilogarm

Explanation:

Just took a test on this!

The quantity of each type of organelle in a cell varies depending on the tasks the individual cell must perform. If a scientist needed to find cells that contained a large number of chloroplasts, where would be the best place to look?

Answers

Answer:

among plants or in a garden

Explanation:

so first thing is to establish the main function of chloroplasts which is photosynthesis the next thing is to establish which organisms primarily carry out this process which are plants therefore mostly in plant cells hope it helps

Which particles are found in an atom have charges

Answers

Atomic particles Because the usually have a chain reaction when blown up

Answer:

protons and electrons

Explanation:

protons are positivley charged

electrons are negetively charged

but neutrons have no charge

If an ice cube has a mass of 25 grams and it melts, what would the mass of the liquid water be?

Answers

Answer:25grams

Explanation: the mass stays the same even when it changes form

Answer: The mass of the liquid would be 25 grams because mass does not change, even when changing form.

Find the independent variable and the dependent variable :)))

Answers

Answer:

dependent variable: plant growth

independent: sunlight impact/amount of light

Explanation:

What is the best way to represent the number 1,550,000

Answers

Answer:

You can represent as a exponent. That will be the best way.

Explanation:

Other Questions
4xy - 6xy + 5y - 9y Please also include the steps to solving it. What were the Europeans motivation for exploring and settling the americas, and why did competition increase during the 1500s and 1600s? For centuries, sugar crystals were made from the evaporated juice of sugarcane, a plant grown only in tropical and subtropical climates. In the 1800s, industrial methods were developed to manufacture crystalline sugar from sugar beets. This allowed for large amounts of sugar to be produced in colder, temperate climate zones. 1. What do the abbreviations B.C.E. and C.E. stand for? Alex pays his bills online through his bank. He recently paid $156 for his electric bill and $61 for his internet bill. By how much did Alex's bank account change by paying the bills? Which number line shows the solution to 6 (2)? Which equation has the solution x = 6? One-sixth x = three-fourths x + 2 One-fourth x + one-half = one-third x One-half x + 3 = three-fifths x + 3 Four-fifths x minus 1 = three-fourths x [easy points] what is the verbal expression to this equation What is the solution to this equation?-8x + 4 = 36O A. x= -4O B. x = 4O c. x= -5O D. x = 5 In a college of exactly 2560 students, exactly 50 % are male. What is the number of female students? why did the flint water crisis occur? The Table Below shows the survey results from seven randomly selected probability and statistics students in one high school classroom. what is the perimeter, in feet (ft), of a right triangle which has an area of 12 ft^2 and one leg that has a length of 4 ft? simplify the expression what is the jurisdiction of police power?a. creating lawsb. race profilingc. public safety d. religious morals Find the opposite and reciprocal of 1.2 *1 pointOpposite: -1.2, Reciprocal: 1/1.2Opposite: -1.2, Reciprocal: 5/6Opposite: -1.2, Reciprocal: 6/5Opposite: -1.2, Reciprocal: 25x3Write a simplified expression for the perimeter of the shape *1 pointdtc What number divided by 9 is greater than 700? Arrange the compounds by boiling point. a. A pentane molecule with the condensed structure CH3CH2CH2CH2CH3. b. A neopentane molecule with the condensed structure C(CH3)4. c. A hexane molecule with the condensed structure CH3CH2CH2CH2CH2CH3. How are textual evidence and inflection related?Textual evidence directly affects inflection.Textual evidence is important to inferencing, but not inflectionInflection occurs before textual evidence.Textual evidence and inflection are important both when reading by yourself and listening. Multi choice Identify the property of equality that makes Equation 1 and Equation 2 equivalent.Equation 14.2x 1.5 = 1.7x + 8.3Equation 242x - 15 = 17x + 83