For the reaction C + O2 = CO2, if 3 grams of carbon react with the oxygen, how many grams of carbon dioxide are produced?

Answer: A rise in temperature increases the kinetic energy and speed of particles; it does not weaken the forces between them. The particles in solids vibrate about fixed positions; even at very low temperatures. Individual particles in liquids and gases have no fixed positions and move chaotically.

Answer:

energy kinetic particles in substance

If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.

Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.

Hence, if  the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.

Learn more: https://brainly.com/question/13440572

Answer:

because water is actually a limited natural resource

Explanation:

although most of the earth is made up of water , dasalination plants are super expensive and hard to use. Thus slowly due to severely low rainfall over the years the earth is slowly depleting on levels of fresh water thats why we need to be careful how we use water :D !

Answer:

the lowest point of the wave is called Trough

Answer:

Trough is the correct answer

Explanation:

The highest part of the wave is called the crest. The lowest part is called the trough.

Answer:

933.33 m/ min

Explanation:

1 mile = 1.6 km

So the car travels 1.6× 35 km in 1 hour

One hour has 60 minutes

So speed of car = 1.6×35 km / 60 minutes

1km = 1000 m

Speed = 1.6×35×1000 m/ 60 minutes

= 933.33 meters per minute

A car is traveling 35 miles per hour. The speed that is measured in meters per minute is 933.33 m/ min.

Speed is the dimension of distance. It is calculated in meters per second. It is the rate of change of an object in a direction. Speed is calculated by dividing the distance by time. It is a scalar quantity.

Given, that a car is traveling 35 miles per hour. The speed is given, in miles we just have to convert the miles into meters per minute. Miles if the English unit of measurement and meter is the SI unit of measurement.

1 mile = 1.6 km

So the car travels 1.6× 35 km in 1 hour

One hour has 60 minutes

So speed of car = 1.6×35 km / 60 minutes

1km = 1000 m

Speed = 1.6 × 35 × 1000 m/ 60 minutes

= 933.33 meters per minute

Thus, the speed of the car is 933.33 m/ min.

To learn more about speed, refer to the link:

https://brainly.com/question/7359669

#SPJ2

Rutherford proposed the nuclear model of atom. The only one model which can be inferred from this model is nucleus with protons and revolving electrons around.

Rutherford proposed some aspects of atomic structure based on his gold foil experiment. He discovered that the alpha ray is scattering from foil by the repulsion it experienced from the metal.

This results lead to the discovery of positively charged particles in atom latter called as protons. Rutherford proposed that theses protons are located inside the nucleus and the electrons are revolving around the nucleus.

Latter Niels Bohr his student interpreted the nuclear model of Rutherford with quantum mechanics and theory of max planck and he proposed the equations for the determination of energy and momentum of electrons and the radius of atom.

Therefore, no other inferences except the presence of protons and revolving electrons can be obtained from Rutherford's model of atom.

To find more about nuclear model, refer the link below:

https://brainly.com/question/18521318

#SPJ2

Considering the definition of Kc, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

The balanced reaction is:

H₂(g) +Cl₂(g) ⇆ 2 HCl(g)

Equilibrium is a state of a reactant system in which no changes are observed as time passes, despite the fact that the substances present continue to react with each other. In other words, reactants become products and products become reactants and they do so at the same rate.

In other words, chemical equilibrium is established when there are two opposite reactions that take place simultaneously at the same speed.

The concentration of reactants and products at equilibrium is related by the equilibrium constant Kc. Its value in a chemical reaction depends on the temperature and the expression of a generic reaction aA + bB ⇄ cC is

[tex]K_{c} =\frac{[C]^{c} x[D]^{d} }{[A]^{a} x[B]^{b} }[/tex]

That is, the constant Kc is equal to the multiplication of the concentrations of the products raised to their stoichiometric coefficients by the multiplication of the concentrations of the reactants also raised to their stoichiometric coefficients.

In this case, the constant Kc can be expressed as:

[tex]K_{c} =\frac{[HCl]^{2} }{[H_{2} ]x[Cl_{2} ] }[/tex]

You know that in an equilibrium mixture of HCl, Cl₂, and H₂:

Replacing in the expression for Kc:

[tex]4x10^{18} =\frac{[HCl]^{2} }{[1x10^{-11} ]x[2x10^{-10} ] }[/tex]

Solving:

[tex]4x10^{18} =\frac{[HCl]^{2} }{2x10^{-21} }[/tex]

[tex]4x10^{18} x 2x10^{-21}=[HCl]^{2}[/tex]

[tex]8x10^{-3} =[HCl]^{2}[/tex]

[tex]\sqrt[2]{8x10^{-3}} =[HCl][/tex]

0.0894 [tex]\frac{mol}{L}[/tex]= [HCl]

Finally, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

Learn more:

In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.

Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.

Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:

[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]

Next, we multiply each anion's oxidation number by the subscript, to obtain the following:

[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]

Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.

Learn more:

Answer:

A. because there both high pitched voice and low pitched ( girls have sweet, shrill ,high pitched good voice ) where as boys have horase ,low pitched medium voice )

This question is describing the following chemical reaction at equilibrium:

[tex]A\rightleftharpoons B[/tex]

And provides the relative amounts of both A and B at 25 °C and 75 °C, this means the equilibrium expressions and equilibrium constants can be written as:

[tex]K_1=\frac{90\%}{10\%}=9\\\\K_2=\frac{20\%}{80\%} =0.25[/tex]

Thus, by recalling the Van't Hoff's equation, we can write:

[tex]ln(K_2/K_1)=-\frac{\Delta H}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]

Hence, we solve for the enthalpy change as follows:

[tex]\Delta H=\frac{-R*ln(K_2/K_1)}{(\frac{1}{T_2} -\frac{1}{T_1} ) }[/tex]

Finally, we plug in the numbers to obtain:

[tex]\Delta H=\frac{-8.314\frac{J}{mol*K} *ln(0.25/9)}{[\frac{1}{(75+273.15)K} -\frac{1}{(25+273.15)K} ] } \\\\\\\Delta H=4,785.1\frac{J}{mol}[/tex]

Learn more:

Answer:

ask you subject teacher

Explanation:

Answer:1. Decission

2.Structured or programmed decision

3.Unstructured or non -programmed decisions

4.Forecasting

5.Contingency planning

6.Scenario planning

7.Bench marking

8.Participatory planning

9.quantitative

10.qualitative

11.Uncertainty conditions

12.eigt steps

13. Decision making

14.Trigger point

15.Certainty conditions

Explanation:

It's all about organization and management.

Explanation:

I hope it helps

Nutmeg

Nubbing

Notifying

Neezing

Nudging

Needing

Niffing

Narcotizing

Nanjing

Neighbouring

Nothing

Nimming

Neighboring

Netting

Nesting

Narcing

Nitpicking

Non-Living

Neutralizing

Nightwalking

Nonspeaking

Prior to writing the chemical formula of magnesium chloride, a question which any student will need to ask is: A.  What are the oxidation numbers of each atom?

A chemical formula can be defined as a scientific notation that is used to show (represent) the type and total number of atoms that constitute a particular chemical molecule or compound, by using the oxidation number, chemical symbols and subscripts.

Hence, a student would need to know the oxidation numbers of each atom when magnesium chloride is formed after a chemical reaction.

In Chemistry, an oxidation number represents the number of electrons gained or lost by an atom of a chemical element during a chemical reaction.

In conclusion, when magnesium chloride is formed, a question which the student will need to ask prior to writing the chemical formula is "what are the oxidation numbers of each atom?"

Read more: https://brainly.com/question/13750908

Answer:

5.39 X 10-4

Explanation:

Try Checking It Out If It Right Or Not

Answer: the answer is c.

Explanation:

i juss guessed and it was right?

Answer:

dilute solution

A solution containing less solute than the equilibrium amount is called a dilute solution. The solvent has a limited capacity to dissolve a solute.

Explanation:

Halogens combine with alkanes to yield halogenoalkanes. It is a chain reaction.

Alkanes are a group of organic molecules whose functional group is the carbon - carbon single bond. The halogenation of alkanes refers to the process by which alkanes reacts with halogen molecules to yield halogenoalkanes.

The following are true statements regarding the halogenation of alkanes;

Learn more: https://brainly.com/question/17638582

Answer:

natural materials like cotton

Electrolysis is the production of a chemical reaction by passing an electric current to liquid containing ions.

Answer:

Aluminium reusable water bottle Purpose of aluminum: Weighs less by volume than most other metals and comes at an affordable price.

Explanation:

The maximum chemical amount in moles of Ni₂ (aq) that can be released into the solution is 0.978 mol.

Using Q = nF where Q = quantity of electricity = 9.439 × 10⁴ C = 94390, n = number of moles of NI₂ (aq) and F = Faraday's constant = 96485 C/mol

Making n subject of the formula, we have

n = Q/F

substituting the values of the variables into the equation, we have

n = Q/F

n = 94390 C/96485C/mol

n = 0.978 mol

So, the maximum chemical amount in moles of Ni₂ (aq) that can be released into the solution is 0.978 mol.

Learn more about electrolysis here:

https://brainly.com/question/10692990

Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.

According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.

The average speed of gas molecules depends on temperature and molar mass as shown by the relation;

vrms = √3RT/M

The following statement are true among the options provided;

The following are false among the options provided;

Learn more: https://brainly.com/question/6505878

Explanation:

filling air inside an empty o2 medal containers, if air is added, the air inside, creates volume inside.

due to heat, weather,... depending on what indoor or outdoor storage said containers r placed in,;

So, I can't give you an answer, due to lack of details..sorry...

Answer:

B.

Explanation:

Hope this helpssss

<33

Answer:

New volume = 6.0L

Explanation:

Make a list of variables given in the question, and what we want to find:

Initial volume (L) = Vi = 3.1

Initial temperature (K) = Ti = 193

New temperature (K) = Tn = 374

New volume (L) = Vn

We have volumes and temperatures given and we're talking about gas, the equation including both these variables that should come to mind is the ideal gas equation:

PV = nRT

P = pressure (Pa)

n = number of moles

R = gas constant = 8.31

Now, we construct an equation we can solve to get the new volume:

P(Vn) = nR(Tn)

And insert the values we know:

P(Vn) = n(8.31)(374)

P(Vn) = n·3107.94

The equation contains 3 unknown variables;

We should first try to see if we can eliminate the 2 we are not interested in, namely P and n;

What we should recognise is that the pressure and number of moles will not change upon warming the balloon;

Firstly, heating the gas inside the balloon doesn't add anything to the balloon, i.e. doesn't increase the moles of gas, it simply raises the energy of the gas particles already within the balloon, so n will not change;

Secondly, I think there is a mistake in the question, it should read "assume constant pressure" in the brackets, since the temperature does change, which we are told;

Also, we can assume normal atmospheric pressure inside and outside the balloon as would be the case ordinarily;

What we want to do with this information is rearrange the equation we constructed to have these 2 constant or unchanging variables on one side and everything else on the other, so:

[tex]\frac{P}{n} = \frac{3107.94}{V_{n} }[/tex]

Next, we construct an equation for the balloon before warming:

P(Vi) = nR(Ti)

P(3.1) = n(8.31)(193)

P·3.1 = n·1603.83

Once again, rearrange to get P and n on one side of the equation and everything else on the other:

[tex]\frac{P}{n} = \frac{1603.83}{3.1} \\\\ \frac{P}{n} = 517.364516[/tex]

Now, we have two equations for P/n, we can eliminate P/n since both these values remain the same before and after warming the balloon as previously established:

[tex]\frac{3107.94}{V_{n} } = \frac{P}{n} = 517.364516 \\\\ \frac{3107.94}{V_{n} } = 517.364516 \\\\[/tex]

Now, rearrange and solve for Vn:

[tex]\frac{3107.94}{V_{n} } = 517.364516 \\\\ V_{n} = \frac{3107.94}{517.364516} \\\\ V_{n} = 6.00725...[/tex]

Vn = 6.0L

52

Explanation:

70x45÷60= 52

I hope this is helpful

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is ~ D

Solute is the substance that dissolves into another substance

found a picture hope this helps