for the image below, the focal length is 1/2 of the radius of curvature, object distance is 247 cm. the size of the object is 46 cm. what is the image size equal to in cm? remember that it could be positive or negative.

Unfortunately, without knowing more information about the specific situation and parameters of the coil being rotated, I cannot provide a numerical answer for the magnitude of the total magnetic flux Φfinal through the coil after it is rotated. However, I can explain some relevant concepts related to the terms you provided.

Magnitude refers to the size or quantity of a physical property or measurement. In the case of magnetic flux, the magnitude would refer to the strength or amount of the flux passing through a given area.

Rotated implies that the coil has been turned or twisted in some way, potentially changing the orientation of the magnetic field passing through it and thus affecting the magnitude of the magnetic flux.

Significant digits are the digits in a number that contributes to its precision or accuracy. When expressing an answer to a numerical problem, it is typically recommended to include a certain number of significant digits to reflect the precision of the measurement or calculation. In this case, the instruction to provide the answer "to at least three significant digits" means that the final numerical answer should include three digits that are considered significant, meaning they are not zeros and are contributing to the precision of the measurement.
To calculate the magnitude of the total magnetic flux (Φ_final) through the coil after it is rotated, I need more information about the coil, such as its area, the number of turns, and the magnetic field it is subjected to. Please provide these details, and I can help you with the calculation.

Learn more about the precision here:- brainly.in/question/13549.

#SPJ11

Light bulb could be plugged into a socket in Europe, would be true about how bright the bulb was (c). The bulb would be one-half as bright is the correct option.

The brightness of a light bulb is measured in terms of its power consumption, which is given in watts (W). When the voltage is constant, the power consumed by a device is directly proportional to its brightness. In the United States, a standard 60 W light bulb operates at 120 V. To determine the current consumed by the bulb, we can use Ohm's law:

Power = Voltage x Current

60 W = 120 V x Current

Current = 60 W / 120 V = 0.5 A

Now, if we were to plug this same 60 W light bulb into a socket in Europe with a standard voltage of 240 V, we can use Ohm's law again to determine the current consumed by the bulb:

Power = Voltage x Current

60 W = 240 V x Current

Current = 60 W / 240 V = 0.25 A

The power consumed by the bulb is the same, regardless of the voltage it is connected to. But the current consumed by the bulb in Europe is half of what it would be in the United States.

The bulb would be one-half as bright when plugged into a socket in Europe compared to when it is plugged into a socket in the United States.

To know more about Light bulb

https://brainly.com/question/12722333

#SPJ4

All parallel equipment grounding conductors must be a minimum No. 1/0 according to the code 310-10(H)(5). The answer is: False. The code 310-10(H)(5) does not specify a minimum No. 1/0 size for parallel equipment grounding conductors. It is important to follow the specific code requirements for conductor sizing in parallel installations.

According to NEC 310-10(H)(5), parallel equipment grounding conductors are not required to be larger than No. 1/0 unless they are part of a feeder or service entrance, in which case they must be at least the same size as the largest ungrounded conductor. However, it is recommended to use the same size equipment grounding conductors in parallel to simplify installation and minimize impedance differences between the conductors.

To know more about  grounding conductors, please click on:

https://brainly.com/question/14405035

#SPJ11

E. It accounted well for Galileo's observations of the phase cycle of Venus. It accounted well for Galileo's observations of the phase cycle of Venus. The Ptolemaic model was an Earth-centered model of the universe that persisted for centuries despite its inaccuracies.

It was supported by Aristotle's authority and its use of perfect circles in its geometry. Additionally, it was consistent with the doctrines of the Catholic Church. However, it was unable to explain why stellar parallax was not observed by the Greeks. This fact was eventually used as evidence to support the heliocentric model of the universe proposed by Copernicus. Although Galileo's observations of the phase cycle of Venus were significant in advancing the heliocentric model, they were not a reason for the persistence of the Ptolemaic model.

Find out more about the Ptolemaic model.

brainly.com/question/30666789

#SPJ11

The change in internal energy of the gas is zero and the heat absorbed by the gas in this process is 250 J.

(a) Since the gas is expanding quasi-statically and its temperature remains constant, we can assume that the internal energy of the gas also remains constant.
(b) According to the first law of thermodynamics, the change in internal energy of a system is equal to the heat added to the system minus the work done by the system. Since the internal energy is constant, we can write:
Heat absorbed by the gas = Work done by the gas
Heat absorbed by the gas = 250 J (given in the question)

To learn more about temperature click here https://brainly.com/question/4160783

#SPJ11

The resonance frequency Æ0 is 318309.89 Hz. The resonance frequency of a series LRC circuit is given by the formula [tex]Æ0 = 1/(2π√(LC))[/tex].

Substituting the given values, we get [tex]Æ0 = 1/(2π√(0.030H x 1.0*10^-9F))[/tex] = [tex]318309.89 Hz[/tex]. This means that when an AC voltage is applied to the circuit at this frequency, the circuit will resonate and the current will be maximum. At frequencies higher or lower than the resonance frequency, the current will decrease. The resistor R in the circuit causes the current to decrease with time and thus limits the amplitude of the resonant current.

Learn more about resonance frequency here:

https://brainly.com/question/13040523

#SPJ11

The final velocity of the car is 1.33 m/s to the west.

The final velocity of the car is calculated by applying the principle of conservation of linear momentum.

m1v1 + m2v2 = m1v1' + m2v2'

where;

The final velocity of the car is calculated as

(1000 kg)(-8 m/s) + (900 kg)(6 m/s) = (1000 kg)(-1.4 m/s) + (900 kg)(v2')

-2,600 = -1400 + 900v2'

v2' = -1200/900

v2' = -1.33 m/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

The correct answer is C) 62.5 mL.

Below is the step - wise procedure.

To prepare the desired solution, you can use the dilution formula: C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

1. Identify the given values:
C1 = 0.100 M (initial concentration of HCl stock solution)
C2 = 0.0250 M (final concentration of HCl)
V2 = 250.00 mL (final volume of diluted HCl solution)

2. Rearrange the formula to solve for V1:
V1 = (C2 * V2) / C1

3. Plug in the given values:
V1 = (0.0250 M * 250.00 mL) / 0.100 M

4. Calculate the result:
V1 = 62.5 mL

So, to prepare 250.00 mL of 0.0250 M HCl, you should use 62.5 mL of the 0.100 M HCl stock solution. The correct answer is C) 62.5 mL.

Learn more about HCL Solution from : https://brainly.com/question/31019516

#SPJ11

The given statement "In assessing radiation hazard, the sum total of all exposures should be considered" is true.

When evaluating the potential risk of radiation exposure, it is important to take into account all sources of exposure, including background radiation, medical procedures, occupational exposures, and environmental contamination.

This cumulative exposure can contribute to the overall dose received by an individual and can impact their health over time. So it is important to monitor and control all sources of radiation exposure to minimize potential risks and ensure the safety of individuals working or living in radiation-prone environments.

Thus, the correct choice is a. true.

For more such questions on hazard, click on:

https://brainly.com/question/28020619

#SPJ11

The magnetic energy stored per unit length in the interior of the wire can be found using the formula U = (μ₀/2) ∫B² dV

where U is the magnetic energy per unit length, μ₀ is the vacuum permeability, B is the magnetic field, and dV is the differential volume element.

For a long straight wire carrying a current i uniformly distributed across its cross-sectional area, the magnetic field inside the wire is given by:

B = (μ₀/2πr) i

where r is the radius of the wire.

The differential volume element can be expressed as dV = πr² dx, where dx is the length of the element.

Substituting these values in the formula, we get:

U = (μ₀/2) ∫[μ₀²i²/(4π²r²)] πr² dx

Simplifying, we get:

U = (μ₀i²/8π) ∫dx

Integrating from 0 to L (the length of the wire), we get:

U = (μ₀i²L/8π)

The magnetic energy stored per unit length in the interior of the wire is given by:

U/L = (μ₀i²/8π)

To find the magnetic energy stored per unit length in the interior of a long straight wire with radius r carrying a current i uniformly distributed across its cross-sectional area, you can use the following formula:

Magnetic energy per unit length (U) = (μ₀ * i²) / (16π * r)

Where μ₀ is the permeability of free space (4π x 10⁻⁷ Tm/A). This formula represents the magnetic energy stored in the wire due to the magnetic field created by the current.

To learn more about magnetic energy click here

brainly.com/question/29213676

#SPJ11

(a) The width of the central maximum is 3.75 mm. (b) The width of the first order fringe is 1.87 mm.

(a) The width of the central maximum can be found using the formula:

w = (λL) / D

where w is the width of the central maximum, λ is the wavelength of light, L is the distance from the slit to the screen, and D is the width of the slit.

Substituting the given values, we get:

w = (570 × 10⁻⁹ m × 1.80 m) / 0.465 × 10⁻³ m = 3.75 mm

Therefore, the width of the central maximum is 3.75 mm.

(b) The width of the first order fringe can be found using the formula:

w = (λL) / d

where w is the width of the first order fringe, λ is the wavelength of light, L is the distance from the slit to the screen, and d is the distance from the central maximum to the first order fringe.

To find d, we can use the small angle approximation:

sinθ ≈ θ ≈ d/L

where θ is the angle between the central maximum and the first order fringe.

Substituting the given values, we get:

θ = d/L = 1.87 × 10⁻³ m / 1.80 m ≈ 0.00104 radians

Using the same formula as part (a), we can find the width of the first order fringe:

w = (570 × 10⁻⁹ m × 1.80 m) / 0.00104 = 1.87 mm

Therefore, the width of the first order fringe is 1.87 mm.

learn more about wavelength here:

https://brainly.com/question/13533093

#SPJ11

At the rated capacity of the water treatment plant, 4.85 minutes of disinfection are provided in the 1000 foot, 48 inch diameter pipeline using chlorine at a dosage of 4 ppm.

To calculate the time of disinfection provided in the pipeline, we need to know the volume of the pipeline and the dosage of chlorine used for disinfection.

Assuming the pipeline is filled to capacity with water, the volume of the pipeline can be calculated using the formula:

Volume = pi x (diameter/2[tex])^2[/tex]x length

Where pi is the constant 3.14, diameter is 48 inches (converted to feet by dividing by 12), and length is 1000 feet.

So, Volume = 3.14 x (48/2)^2 x 1000 = 452,389 cubic feet

To determine the dosage of chlorine, we need to know the concentration of chlorine added to the water. Let's assume a concentration of 4 parts per million (ppm), which is a common dosage for disinfection.

The dosage of chlorine can be calculated using the formula:

Dosage = concentration x volume

Where concentration is 4 ppm (or 0.004 parts per million, since 1 ppm = 0.001 parts per million) and volume is 452,389 cubic feet (converted to gallons by multiplying by 7.48, the number of gallons in a cubic foot).

So, Dosage = 0.004 x 452,389 x 7.48 = 13,478.7 gallons

Now, we need to calculate the time it takes for the water to flow through the pipeline at a rate of 4.0 MGD (million gallons per day). To convert MGD to gallons per minute (GPM), we divide by 1440 (the number of minutes in a day).

So, Flow rate = 4.0 MGD / 1440 = 2,778 GPM

Finally, we can calculate the time of disinfection provided in the pipeline using the formula:

Time = Dosage / Flow rate

Time = 13,478.7 gallons / 2,778 GPM = 4.85 minutes (rounded to two decimal places)

Therefore, at the rated capacity of the water treatment plant, 4.85 minutes of disinfection are provided in the 1000 foot, 48 inch diameter pipeline using chlorine at a dosage of 4 ppm.

Learn more about diameter pipeline

https://brainly.com/question/31356837

#SPJ4

Maxwell’s first equation is based on the Gauss law of electrostatic, which states that “when a closed surface integral of electric flux density is always equal to charge enclosed over that surface. The product of the electric flux density vector and surface integral is equal to the charge enclosed.

The circle in the Ampere-Maxwell relation, integral w circle B Ds, refers to the closed path or loop along which the integral is taken. It represents a complete loop around a current-carrying wire or a closed circuit. the Ampere-Maxwell relation, the integral with the circle  represents a line integral taken over a closed loop or path. The terms "Ampere," "integral," and "circle" in this context are related. The circle in the integral refers to the closed path integral of the magnetic field  around a loop. The term Amperes associated with the enclosed current I enc in the loop, and the integral calculates the contribution of both the current and the changing electric field to the magnetic field surrounding the loop.

learn more about Maxwell here

https://brainly.com/question/31390573

#SPJ11

The scale reads 764 N at its peak, which is slightly more than your weight of 728 N when you're just standing on it.

This is because the additional compression of the spring due to your jump adds some extra force. When you jump on the bathroom scale from a height of 1.06 m, the scale will read a higher value than 728 N at its peak. This is because the added kinetic energy from jumping will increase the force exerted on the scale, causing the spring to compress more than 0.542 mm. However, without knowing the spring constant, we cannot precisely determine the scale's reading at its peak.

Learn more about  force here: https://brainly.com/question/13191643

#SPJ11

To find the distance traveled using the equation d=1/2at^2, you need to use the value of the acceleration (a) of the car. ]

Since the car is undergoing constant acceleration, we can find its value by using the formula a = (v-u)/t, where v is the final velocity (24 m/s), u is the initial velocity (0 m/s), and t is the time taken (9.0 s).
a = (v-u)/t = (24-0)/9.0 = 2.67 m/s^2

Therefore, to find the distance traveled using the formula d=1/2at^2, you should use the value of 2.67 m/s^2 for a.
To find the value of acceleration (a), you can use the equation:
a = (v - u) / t

where v is the final velocity (24 m/s), u is the initial velocity (0 m/s), and t is the time taken (9.0 s).
a = (24 m/s - 0 m/s) / 9.0 s
a = 24 m/s / 9.0 s
a = 2.67 m/s²
So, you should use 2.67 m/s² as the value of acceleration (a) in the equation d = 1/2at² to find the distance traveled.

To know more about Equation  click here .

brainly.com/question/29657983

#SPJ11

Loose objects on the dashboard slide to the right when the car turns suddenly to the left because they have inertia

When loose objects are placed on the dashboard of a car, they may slide to the right when the car turns suddenly to the left. objects at rest tend to stay at rest and objects in motion tend to stay in motion. As the car turns left, there is a force pushing the loose objects to the right, and gravity alone is not strong enough to hold them in place. Therefore, the objects slide to the right due to their inertia. To prevent this, it's best to secure loose objects on the dashboard or remove them altogether to ensure safety while driving.

learn more about inertia Refer: https://brainly.com/question/30763701

#SPJ11

In order for the capacitance of the parallel plate capacitor to increase, the plate area must increase and the distance between the plates must decrease.

This is because capacitance is directly proportional to the plate area and inversely proportional to the distance between the plates. Capacitance is the ability of a system to store an electrical charge when a voltage difference is applied across it. The capacitance of a system is determined by the size of the plates, the distance between the plates, and the type of material between the plates. A capacitor is a device that is made up of two conductive plates separated by an insulating material called the dielectric. When a voltage is applied across the two plates, electric charges accumulate on the plates, creating an electric field between them.

learn more about capacitance Refer: https://brainly.com/question/28445252

#SPJ11

When a rock with 200 joules of potential energy is dropped from rest on the moon, its potential energy will be converted into kinetic energy as it falls.

The rock with 200 joules of potential energy is initially at rest on the moon. As it falls towards the surface, its potential energy is converted into kinetic energy. Therefore, when it reaches the surface of the moon, all of its potential energy has been converted to kinetic energy. At the moment it hits the surface of the moon, its kinetic energy will be equal to its initial potential energy, which is 200 joules. The kinetic energy of the rock can be calculated using the formula KE = 1/2[tex]mv^{-2}[/tex], where m is the mass of the rock and v is its velocity. Since we don't know the mass of the rock or the distance it has fallen, we can't determine its velocity or kinetic energy. However, we do know that the rock's kinetic energy at the moment it hits the surface of the moon is equal to the 200 joules of potential energy it had when it was dropped.

Learn more about mass here: https://brainly.com/question/19694949

#SPJ11

The angular displacement, ω₀ is the initial angular velocity, α is the angular acceleration, and t is the time.
Since the CD starts from rest, ω₀ = 0. The angular displacement θ is given as 0.250 rev, which should be converted to radians 1 rev = 2π radiansθ = 0.250 rev × 2π rad/rev = 0.5π radians.


The angular acceleration = final angular velocity - initial angular velocity / timeSince the CD starts from rest, the initial angular velocity is 0. The final angular velocity is given as 477 rev/min. We need to convert this to radians per second
final angular velocity = 477 rev/min * 2π radians/rev * 1/60 min/sec = 49.87 radians/second The time it takes for the CD to reach this speed is not given, but we can find it using the formula for angular displacement angular displacement = final angular velocity + initial angular velocity / 2 * time Since the CD starts from rest, the initial angular velocity is 0. We can rearrange the formula to solve for time = 2 * angular displacement / final angular velocity + initial angular velocity
Plugging in the values, we get me = 2 * 0.250 rev / 49.87 radians/second + 0 = 0.01002 seconds Now we can calculate the angular acceleration angular acceleration = 49.87 radians/second - 0 / 0.01002 seconds = 4,977 radians/second^2
This is not one of the answer choices, but we can convert it to the given units angular. acceleration=4,977radians/second^2 * 1 rev/2π radians^2 * 1 min/60 sec^2 ≈ 794 rad/s^2Therefore, the answer is E 794 rad/s2. To find the angular acceleration of the compact disc CD, we can use the following equationθ = ω₀t + 1/2αt².

learn more about angular here

https://brainly.com/question/14769426

#SPJ11

The most devastating factor to biodiversity among the given options is habitat destruction. This is because habitat destruction can lead to the displacement and loss of entire ecosystems, resulting in the extinction of species that rely on that habitat for survival.

While over hunting, global warming, and pollution also have significant impacts on biodiversity, habitat destruction has the greatest potential for irreversible damage to ecosystems and the species that depend on them. The most devastating factor to biodiversity among the options given is habitat destruction. Habitat destruction is the most devastating to biodiversity because it leads to the loss of ecosystems and the species that depend on them. When habitats are destroyed, species lose their food sources, shelter, and breeding grounds, often resulting in population declines and even extinction. Additionally, habitat destruction can exacerbate the effects of other threats like overhunting, global warming, and pollution.

learn more about devastating here

https://brainly.com/question/15109667

#SPJ11

According to Planck’s equation, E hv, the lowest frequency is associated with the lowest energy. In Figure 6.14 the shortest vertical line represents the smallest energy change. Thus, then 4 to n 3 transition produces the longest wavelength lowest frequency line.

The wavelength and frequency of a wave are inversely proportional, meaning that as the wavelength increases, the frequency decreases. This also means that the energy of the wave decreases since energy is directly proportional to frequency. According to Planck’s equation, E hv, the lowest frequency is associated with the lowest energy. In Figure 6.14 the shortest vertical line represents the smallest energy change. Thus, then 4 to n 3 transition produces the longest wavelength lowest frequency line.

learn more about frequency here

https://brainly.com/question/18376585

#SPJ11

The 3 inch outside the box rule does not apply in this case. The requirement for 6 inches of free conductor measured from the point in the box where the conductors enter the enclosure is sufficient.

Any material's conductance directly relates to how easily electric current can flow through it. Resistance's opposite is conductance. Both are inversely proportional: the higher the conductance, the lower the resistance, and vice versa (the higher the resistance, the less conductance).

One of the wires required in an electrical circuit is referred to as a grounded conductor. In essence, it acts as a neutral conductor.  In the past, it carried the current when everything were normal. While grounding, on the other hand, refers to a safety wire that is connected to the earth but does not now transmit via it

Since grounding wire is also known as a safety wire, only extreme situations, such as a short circuit, for it to carry current.

Learn more about Conductor here

https://brainly.com/question/14405035

#SPJ11

When light with a wavelength of 216 nm strikes the surface of tin metal, it transfers energy to the metal's electrons. If the energy transfer is sufficient, electrons can be ejected from the surface of the metal. To answer your question, we'll need to use the concept of the photoelectric effect and the following terms: wavelength, 216 nm, electrons, and binding energy.

The photoelectric effect occurs when light (or photons) with a certain wavelength strikes the surface of a material like tin metal, causing electrons to be ejected.The maximum kinetic energy of the ejected electrons is determined by the energy of the incident light and the binding energy of the electrons to the metal. The binding energy of an electron is the energy required to remove it from the metal's surface.
To calculate the binding energy of the electrons ejected from the tin metal, we can use the equation:
Binding energy = energy of incident light - maximum kinetic energy of ejected electrons
The energy of incident light can be calculated using the equation:
Energy = (hc) / wavelength
here h is Planck's constant, c is the speed of light, and wavelength is the wavelength of the incident light.
Substituting the values given in the question, we get:
Energy = (6.626 x 10^-34 J.s x 3 x 10^8 m/s) / (216 x 10^-9 m) = 9.18 x 10^-19 J
Now, we can use the first equation to calculate the binding energy:
Binding energy = 9.18 x 10^-19 J - 2.1 x 10^-19 J = 7.08 x 10^-19 J
Therefore, the binding energy of the electrons to the tin metal is 7.08 x 10^-19 J.

For more information on Planck's constant see:

https://brainly.com/question/30763530

#SPJ11

The initial speed of the ball is approximately 25.5 m/s.

To find the initial speed of the ball, we can use the Pythagorean theorem which states that in a right triangle, the square of the hypotenuse (the longest side) is equal to the sum of the squares of the other two sides.

In this case, the horizontal and vertical velocities of the ball form the two sides of a right triangle, and the initial speed of the ball is the hypotenuse.

So, using the Pythagorean theorem, we have:

initial speed = √(horizontal velocity² + vertical velocity²)
initial speed = √(17² + 19²)
initial speed = √(289 + 361)
initial speed = √650
initial speed ≈ 25.5 m/s

Learn more about speed:

https://brainly.com/question/13943409

#SPJ11

Answer:

29 Newtons, Motion is going down

Explanation:

7+6+10+6 = 29 Newtons

Yes, falling raindrops can develop an electric charge due to the friction between the droplets and the air molecules.

This charge can create noticeable forces between the droplets. In the case of two 1.8 mg drops each with a charge of 25 pc and located 4.0 mm apart, the electrostatic force between the drops would be approximately 4.5 x[tex]10^{-8}[/tex] N, which is a very small force. However, if the charges on the drops were much larger or the drops were closer together, the force could be much greater. Overall, while the electrostatic forces between raindrops are usually small, they can play a role in the behavior of raindrops in the atmosphere.

Learn more about forces here: https://brainly.com/question/13191643

#SPJ11

The siting of nuclear facilities is subject to extensive regulation and licensing by the c. Nuclear Regulatory Commission.

The siting of nuclear facilities is subject to extensive regulation and licensing by the Nuclear Regulatory Commission to ensure the safety and protection of the public and the environment from potential nuclear hazards. The Nuclear Regulatory Commission regulates commercial nuclear power plants and other uses of nuclear material. The NRC licenses and regulates the Nation's civilian use of radioactive materials to protect public health and safety, promote common defense and security, and protect the environment.

Learn more about  radioactive materials here: https://brainly.com/question/3542572

#SPJ11

The new orbital speed after friction from the Earth's upper atmosphere has done -7.5x[tex]10^{9}[/tex] J of work on the satellite is approximately 7489 m/s.

We can use the work-energy principle to solve this problem. The work done by the atmosphere is equal to the change in kinetic energy of the satellite

W = ΔK

Where W is the work done by the atmosphere and ΔK is the change in kinetic energy. We can find the initial kinetic energy of the satellite using the formula

K = (1/2)m[tex]V^{2}[/tex]

Where m is the mass of the satellite and V is its initial velocity.

Since the problem does not provide the mass of the satellite, we can assume it is constant and cancel it out in the equations. Thus, we can write

W = ΔK = (1/2)m[tex]Vf^{2}[/tex] - (1/2) m[tex]Vi^{2}[/tex]

Where Vf is the final velocity of the satellite and Vi is its initial velocity.

Substituting the given values, we have

-7.5x[tex]10^{9}[/tex] J = (1/2)m[tex]Vf^{2}[/tex] - (1/2) m[tex]Vi^{2}[/tex]

We also know that the initial orbital speed of the satellite is equal to the velocity required for circular motion at its altitude, which can be calculated using the formula

V = √(GM/r)

Where G is the gravitational constant, M is the mass of the Earth, and r is the distance between the satellite and the center of the Earth.

Substituting the given values, we have

Vi = √[(6.67x[tex]10^{-11}[/tex]N[tex]m^{2[/tex]/[tex]Kg^{2}[/tex])(5.97x[tex]10^{24}[/tex] kg)/(6.67x[tex]10^{6}[/tex]m)] = 7646 m/s

Solving for the final velocity, we have

Vf = √[2(-7.5x[tex]10^{9}[/tex] J)/(m) + [tex]Vi^{2}[/tex]]

The mass of the satellite cancels out, and we get

Vf = √(2(-7.5x[tex]10^{9}[/tex] J)/([tex](7646m/s)^{2}[/tex] + [tex](7646m/s)^{2}[/tex] ) ≈ 7489 m/s

Therefore, the new orbital speed after friction from the Earth's upper atmosphere has done -7.5x[tex]10^{9}[/tex] J of work on the satellite is approximately 7489 m/s.

To know more about kinetic energy here

https://brainly.com/question/31432487

#SPJ4

- The brighter the object
- The bluer the object

As an object gets hotter, it emits more energy and therefore appears brighter. Additionally, as the temperature of an object increases, its color shifts towards the blue end of the spectrum. So, a hotter object will appear both brighter and bluer than a cooler object.

The distance between the corresponding points of two succeeding waves is known as the wavelength. When two points as well as particles are considered to be "corresponding points," it signifies that they are in the same phase and have successfully finished the exact same portions of their vibration. While longitudinal waves—those whose points advance in the same direction—have their wavelength measured from compression to compaction or from rarefaction to rarefaction, transverse ripples—those whose points advance at right angles to one another—typically have their wavelength measured from crest to crest or from groove to trough.

The speed (v) and frequency (f) of a wave train in a medium are equal, hence the equation for wavelength is v/f. Lambda is a typical representation of wavelength in Greek.

Learn more about object here

https://brainly.com/question/28147983

#SPJ11

Answer:

4 (aphotic zone)

Hope it helped! :)