For each of the following molecules, would you expect greater solubility in water or in hexane?
a. toluene
b. sucrose (table sugar)
c. isobutene
d. ethylene glycol

Answer:

8.3 × 10⁴kg

Explanation:

Solution in the diagram

The percentage strength of the solution is 1%.

According to question,

we are given that the 20mg of cromolyn sodium in 2 ml of normal saline is taken.

Now, to find the percentage strength first know the meaning of percentage strength.

The amount of solute dissolved in gram per liter of the solution is used to determine the solution's strength. It stands for the solution's potency or concentration. It uses gram per liter of expression.

Now here we are given the the mass and volume connection so we have to find the percentage in terms of it.

percentage strength=[tex]\frac{mass}{volume} *100[/tex]

percentage strength=[tex]\frac{0.020*100}{2}[/tex]

on solving we get,

percentage strength=1%

Learn more about percentage strength

brainly.com/question/14531364

#SPJ4

MassMass of oxygen used on combustion of 0.554 mol of phosphorus is 957.12 g.

Combustion is the name given to the chemical reaction in which a material combines with oxygen to produce heat. A substance is said to be combustible if it can burn. Another name for it is fuel. Fuel can be either solid, liquid, or gaseous.

Since, 4 moles of phosphorus burns in the presence of 5 moles of oxygen

Therefore, 0.554 moles of phosphorus will burn in presence of 54×0.554=29.91 moles of oxygen.

Molar mass of oxygen is 32 g/mol.

Hence, mass of oxygen used can be calculated by:

Mass of oxygen used under given reaction conditions =32×29.91⇒957.12 g.

To learn more about combustion visit:

brainly.com/question/15117038

#SPZ1

Mass of oxygen used on combustion of 0.554 mol of phosphorus is 957.12 g. Oxygen has an atomic mass of 15.9994. ss.

Combustion is the name given to the chemical reaction in which a material combines with oxygen to produce heat. Another name for it is fuel. Fuel can be either solid, liquid, or gaseous.

4 moles of phosphorus burns in the presence of 5 moles of oxygen 0.554 moles of phosphorus will burn in presence of 54×0.554=29.91 moles of oxygen. Molar mass of oxygen is 32 g/mol. Mass of oxygen used under given reaction conditions 32×29.9 = 957.12 g.

To learn more about chemical visit :-

https://brainly.com/question/13145357

#SPJ1

The element box contains name and symbol of the element, number of protons and electrons, atomic mass, and electron configuration.

Each key incorporates an detail's name, precise symbol, atomic weight and atomic variety. Oxygen, for example, has an atomic variety of 8, an atomic weight of 15.996 and a completely unique symbol, O.  Each container represents an detail and incorporates its atomic size, symbol, common atomic mass, and (sometimes) name. The factors are organized in seven horizontal rows, referred to as intervals or series, and 18 vertical columns, referred to as groups. The container containing every detail's records is called the detail key. The table is split into 4 more or less square regions referred to as blocks. The rows of the desk are referred to as intervals, and the columns are referred to as groups. Elements from the equal institution of the periodic table display comparable chemical characteristics.

To learn more about periodic table check the link below:

brainly.com/question/15987580

#SPJ4

0.384 moles of nitrogen atoms are inhales by the person in an average breath of air.

Avogadro constant is the number of molecules present in 1 mole of gas or a chemical compound. It is used to specify the atomic mass of a certain number of molecules in a substance or chemical compound or gas, in grams. Theses molecules may be atoms, neutron, proton, electron, etc. One mole of a substance contains 6.023 × 10²³ Molecules. In other words the atomic mass of a substance is the weight of 6.023 × 10²³ molecules.

So 2.31 × 10²³ atoms of nitrogen = (2.31 × 10²³)/(6.023 × 10²³)

= 0.384 moles

To know more about nitrogen, here

https://brainly.com/question/16711904

#SPJ4

The isotopic mass of the least abundant isotope will be 123.05 u.

Average atomic mass of X = 122.131 u

Assume most abundant isotope = Y and least abundant isotope = Z

Relative abundance (Y) = 61.35%

So,

Z = 100 - 61.35

Z = 38.65 %

Isotopic mass of Y= 121.552 u

Isotopic mass of Z = ?

To calculate the isotopic mass we use the following formula:

Average atomic mass = [(mass Y × percent abundance) + (mass Z × percent abundance)] / 100

put the values

122.131 = [(121.552 × 61.35) + (Z × 38.65)] / 100

12213.1 = (7457.22) + (Z × 38.65)

Z × 38.65 = 12213.1 - 7457.22

Z × 38.65 = 4755.88

Z = 4755.88 / 38.65

Z = 123.05

You can also learn about Isotopic mass from the following question:

https://brainly.com/question/23339356

#SPJ4

According to  the concept of molar mass and stoichiometry, the  mass of copper(II) sulfate  that would remain after removing all the water from 55 g of CuSO₄ · 5 H₂O is 35.18 g.

Molar mass of a compound or a molecule is defined as the mass of the elements which are present in it.The molar mass is considered to be a bulk quantity not a molecular quantity. It is often an average of the of the masses at many instances.

Molar masses of an element are given as relative atomic masses while that of compounds is the sum of relative atomic masses which are present in the compound.

In copper(II) sulfate , 249.68 g of copper (II) sulfate has 90 g water, thus 55 g of copper (II) sulfate will have 55×90/249.68=19.82 g water, so mass of copper sulfate= 55-19.82=35.18 g copper(II) sulfate.

Thus,35.18 g copper(II) sulfate would remain after removing all the water from 55 g of CuSO₄ · 5 H₂O.

Learn more about molar mass,here:

https://brainly.com/question/30216315

#SPJ1

Using the law of the conservation of mass, the reactions can be shown to obey the law.

We need to know what the law of the conservation of mass says so that we can be able to know how we can be able to apply the law in the proper perspective. We have to know that the law says that total mass of the system would remain constant. The implication of this is that the mass before the reaction would be the same as the mass after the reaction. The mass of the substance must be able to add up in the system that is under study as we have one here.

Mass of the iron = 56 g

Mass of the chlorine = 35.5 g

Balanced reaction equation;

[tex]2Fe + 3Cl_{2} ---- > 2FeCl_{3}[/tex]

This is the  formation of the iron III chloride

Total mass on the right hand side = 2(56) + 6(35.5) = 325 g

Total mass on the left hand side = 2[56 + 3(35.5)] = 325 g

Learn more about conservation of mass:https://brainly.com/question/13383562

#SPJ1

Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.

The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.

To learn more about carbocation please click on below link

https://brainly.com/question/13164680

#SPJ4

The reactivity of the metals as we go across in the period or  from the left to the right horizontally in the periodic table it will decreases.

The reactivity of the metals as we move across the period from left to right in the periodic table it will decreases. the reactivity of the metals as we move in the group from top to the bottom in the periodic table it will increases due the increase in the size of the elements from top to bottom.

Thus, the reactivity of the metals decreases as we move across period from left to the right in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

Answer:

wavelengths

Explanation:

hope it helps

thanks

Wavelengths are being recorded by the machine by using IR spectrography. Therefore, option B is correct.

Infrared (IR) spectroscopy is also known as infrared spectrometry. It is a technique that is used to analyze and identify chemical compounds based on their absorption or emission of infrared radiation.

Infrared radiation lies in the electromagnetic spectrum between visible light and microwave radiation. It has longer wavelengths and lower frequencies than visible light. When infrared radiation passes through a sample, certain chemical bonds in the sample absorb specific frequencies of infrared light.

Learn more about spectrography, here:

https://brainly.com/question/30917323

#SPJ2

Answer:

Molecule name: N--N-METHYL-N-PROP-2-YNYLAMINE

Formula: C13 H15 N

Molecular weight: 185.265 Da

RMA-3 (Rubidium Microporous Aluminosilicate-3) was hydrothermally synthesized from rubidium–aluminosilicate gels without using any organic or inorganic additives, and its structure determined by XRD Rietveld analysis was confirmed as a novel framework topology containing two 8-membered ring pore-openings with dimensions of 0.49 × 0.37 nm and 0.34 × 0.38 nm

Answer:

Hey there! Just wanted to let you know that the term RMA stands for "relative molecular mass" in chemistry. This is a measure of the size of a molecule, calculated by adding up the atomic weights of all the atoms in the molecule. For example, the relative molecular mass of water (H2O) is 18, because the atomic weight of hydrogen (H) is 1 and the atomic weight of oxygen (O) is 16. The relative molecular mass of a molecule is typically expressed in atomic mass units (amu) and can be useful for characterizing and comparing different substances, and predicting their physical and chemical properties.

Following is the list of primary secondary and tertiary alcohols.

Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.

Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.

For the given formulas, following are different types of alcohols -

a) Primary Alcohols

b) Tertiary Alcohol

c) Secondary Alcohol

d) Primary Alcohol

e) Primary Alcohol

f) secondary Alcohol

To learn more about primary secondary and tertiary alcohols​ from given link

https://brainly.com/question/28108673

#SPJ1

The theoretical yield of a reaction is 5.00 moles of potassium permanganate . If the reaction actually produces 616.2 g KMnO₄ ,  the percent yield of the reaction is 78 %.

given that :

the theoretical yield of the reaction = 5 mol

mass of the potassium permanganate = 616.2 g

molar mass of the potassium permanganate = 158 g /mol

moles of the  KMnO₄ = mass / molar mass

                                   = 616.2 / 158

                                   = 3.9 moles

the percent yield = ( experimental yield / theoretical yield ) × 100 %

                              = ( 3.9 / 5 ) ×100 %

                              = 78 %

To learn more about percent yield here

https://brainly.com/question/14380568

#SPJ4

Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.

The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.

In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.

A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.

To learn more about Lewis structure refer to:

https://brainly.com/question/20300458

#SPJ1

Based on the information, UV light is more likely to damage the material.

Due to the fact that the infrared light bounces off the quartz, which increases its energy, the quartz may become warm.

The colors of paper and fabric can deteriorate due to ultraviolet light from the sun. In the presence of ultraviolet light waves, the chemicals in colored dyes can degrade. Sunburns may also result from ultraviolet radiation.

Paper and other organic materials will deteriorate, bleach, and deteriorate due to ultraviolet radiation. All of these modifications may reduce readability, affect how well artwork is regarded for its aesthetic qualities, and restrict access to the information it contains.

To know more about UV light visit:

https://brainly.com/question/13358417

#SPJ4

Answer:

When ice or any other solid melts, its potential energy increases. Indeed, this is the only increase in energy, since the thermal kinetic energy, or temperature, does not increase while melting. Potential energy is the latent energy that could be released by the water, and this increases because the water will release heat energy if it is frozen solid again.

Ice is the lowest energy state of water at normal Earth pressures. At each phase change of water, whether ice to liquid water or liquid water to water vapor, the potential energy decreases. This is due to the Law of Conservation of Energy. Materials undergoing a change of state absorb or release heat energy, but their temperatures do not change. This is because, while the state change is occurring, all the heat energy is converted into the potential energy of the new state of matter.

Water, in particular, has a very large change in potential energy during phase changes. It takes a great deal of energy to change water from one state to another. This is because of the strong hydrogen bonds that form between water molecules. The liquid phase allows water molecules to be in contact with each other, while the solid phase puts water molecules in an overall optimal configuration relative to each other.

Explanation:

Pg denotes gauge pressure, which is related to absolute pressure as follows: Pa is the local atmospheric pressure, and pg is equal to p - pa.

An automobile tire gauge, for instance, reads 32.0 psi. 14.2 psi is the atmospheric pressure in the area. The gauge pressure equation states that gauge pressure equals the difference between absolute pressure and atmospheric pressure: P G = P P A, or PG=PPA. A tire pressure gauge, for example, monitors the pressure in the tire above ambient pressure. Gauge pressure is the pressure in particular items. Thus, gauge pressure plus atmospheric pressure add up to the total pressure, or absolute pressure: Pabs=Pg+Patm Pabs is the absolute pressure, Pg is the gauge pressure, and Patm is the atmospheric pressure. P abs = P g + P atm

Learn more about pressure here-

https://brainly.com/question/14760196

#SPJ4

Answer:

0.0272 moles

Explanation:

The number of moles of acid that were neutralized can be found by multiplying the volume of the base (in liters) by its concentration (in moles/liter) and then multiplying that value by the stoichiometric coefficient of the acid in the balanced chemical equation for the neutralization reaction.

To begin, we need to convert the volume of the base from milliliters to liters.

50.40 mL = 0.0504 L

Next, we can multiply the volume of the base (in liters) by its concentration (in moles/liter) to find the number of moles of base used in the titration.

0.0504 L * 0.542 M = 0.0272 moles

Since this is a neutralization reaction between a monoprotic acid and a strong base, the acid:base ratio is 1:1.

So the acid that has been neutralized is also 0.0272 moles.

Answer:

Explanation:

There are several things to consider before using hot and cold compresses:

The condition being treated: Different conditions may require the use of hot or cold compresses. For example, hot compresses may be used to alleviate muscle pain, while cold compresses may be used to reduce swelling and inflammation.

The individual's sensitivity to temperature: Some people may be more sensitive to temperature changes and may need to use a compress that is not as hot or cold.

The duration of use: It is generally recommended to use hot compresses for no more than 20 minutes at a time, and cold compresses for no more than 15 minutes.

The potential for burns or frostbite: Hot compresses should not be used on skin that is broken or damaged, as they can cause burns. Cold compresses should not be applied directly to the skin for an extended period of time, as they can cause frostbite.

The individual's overall health: Individuals with certain medical conditions, such as circulation problems, should be careful when using hot and cold compresses and should consult with a healthcare professional before doing so.

As stated, the Tributary, River, and River system are in order of largest to smallest.

A river is a part of the ocean that resembles a ribbon and flows downward under the influence of gravity. A river may be both large and deep or it may be only shallow enough to wade over. A stream, watercourse, or brook is a streaming water source that is lower than a river.

The river flows through the landscape like a silver ribbon. The fast flowing river plunders everything in its path. The river is a seal that is attempting to return toward the tidal ways. A grizzly bear is the river, leaping to get its prey.

To know more about River visit:

https://brainly.com/question/17083829

#SPJ1

The complete question is-

Place the following in order from smallest to largest.

River, River system, Tributary.

Neutral carbon-14 contains six electrons, six protons, eight neutrons.

- The smallest particle that may exist, an atom, is what creates the entire cosmos. It has a core nucleus that houses the neutral species known as neutrons and positively charged species known as protons.

The orbit of the nucleus is being circled by negatively charged species of electrons. The atomic number of an atom is determined by its protons, and the number of protons is always equal to the number of electrons.

The carbon-14 in this instance is an isotope of carbon-12 with a mass number of 14. Atomic number six carbon has a total of six protons and six electrons.

Learn more about atomic number at brainly.com/question/8834373

#SPJ4

The elements with the highest ionization energy are the noble gases, which are located in the upper right corner of the periodic table. These elements include helium, neon, argon, krypton, xenon, and radon. These elements have a full valence electron shell, meaning that they have the maximum number of electrons possible in their outermost energy level. This makes them very stable and resistant to chemical reactions, as they do not have any electrons that can be easily removed or added.

As a result, they have very high ionization energy, meaning that a large amount of energy is required to remove an electron and form an ion. Due to these properties, these elements are not readily reactive with other elements and tend to exist as diatomic molecules or as individual atoms. These elements are used in a variety of industrial, medical, and everyday applications such as in lighting, refrigeration, and as inert gases in medical equipment and in the manufacturing of semiconductors.

Learn more about Ionisation Energy here: https://brainly.com/question/27356170

#SPJ4

Evaporation occurs when a liquid turns into vapour . The particles in the liquid gain energy and move faster and further until some of them escape from the surface and become a vapour

To learn more about Evaporation refers to:

brainly.com/question/24258

#SPJ1

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature

A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.

In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:

P ∝ T ; P/T = k

Where:

P is the pressure that the gas is applying.

T is the gas's actual temperature, while k is a fixed value.

The tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.

To know more about  Gay-Lussac's law refer to:

https://brainly.com/question/2683502

#SPJ1

Inside the metric system, length as well as distance were two of the most significant metrics. Measurement of length and distance can be done in a variety of ways.

Using a metre stick is among the most popular methods for gauging these amounts.

A meterstick, meterstick, nor yardstick consists of either a straightedge as well as foldable ruler was using to measure length, and therefore is notably common inside the construction business. They frequently consist of wood as well as plastic, and their joints frequently consist of plastic as well as metal to allow for folding.

A metre stick is a highly helpful tool in science that is exactly one metre long. A metre stick can be used to gauge items and distances that are both less than as well as longer than one metre.

To know more about metre stick

https://brainly.com/question/13399673

#SPJ4

Option B, Using an excess of aldehyde in the aldol-dehydration reaction is done primarily to ensure complete conversion of the reactants to the desired product.

An excess of aldehyde is used to ensure that there is a sufficient concentration of the aldehyde present in order to form the enolate anion, which is the reactive intermediate in the aldol-dehydration reaction. To achieve high yield: Using an excess of aldehyde allows for the formation of multiple enolate anions, which increases the chances of a double aldol-dehydration reaction taking place, resulting in the formation of the desired product. Using an excess of aldehyde helps aldol-dehydration to prevent this by reducing the exposure of the aldehyde to air.

Learn more about aldol-dehydration here:

https://brainly.com/question/23798009

#SPJ4

you need 3.00 mL of the 4.00 M sulfuric acid solution to make 12.0 mL of a 0.50 M solution.

Solution is a way to solve a problem or address an issue. It can involve finding an answer or coming up with a strategy to tackle a difficult situation. Solutions can be found through research, brainstorming, trial and error, or by using existing resources.

To solve this problem, we must use the equation:
V1C1 = V2C2
Where V1 is the volume of the concentrated solution, C1 is the concentration of the concentrated solution, V2 is the volume of the dilute solution, and C2 is the concentration of the dilute solution.
In this case, V1 is the volume of the 4.00 M solution that we need, C1 is 4.00 M, V2 is 12.0 mL, and C2 is 0.50 M.
Plugging these values into the equation, we can solve for V1:
V1 = (V2C2) / C1
V1 = (12.0 mL)(0.50 M) / (4.00 M)
V1 = 3.00 mL

To learn more about Solution
https://brainly.com/question/25326161
#SPJ4