For each of the following balanced chemical equations, write all possible mole ratios: a. 2Ca + O2 ⎯→ 2CaO b. Mg + 2HF ⎯→ MgF2 + H2

Cool in cold or lukewarm water for 20 minutes.

This should be done as soon as possible after an injury. Never use ice, ice water, cream, or greasy substances like butter on the burn. Be careful to keep the airways open when treating burn victims. Associated smoke inhalation injuries are very common, especially when the patient is burned in an enclosed space such as a room or building. Even people who have been burned outdoors can inhale smoke. Stop the burning process as soon as possible. Remove all clothing and jewelry near the burned area.

Learn more about inhalation injuries visit:

brainly.com/question/28271345

#SPJ4

Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:

CaO + CO -> CaCO3 + O2

This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.

Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.

Hope This Helps You!

Answer:

152.12

Explanation:

hope it helps

Kong Mali po sorry

Water is called a ‘universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance.

Water is referred to as a "universal solvent" because it has a considerably wider range of natural solvent properties than any other liquid. However, water is not capable of dissolving all compounds.

For instance, water cannot dissolve hydroxides, fats, or waxes because oppositely charged particles are not very soluble in water. Hydrogen and oxygen atoms are arranged polarly in water molecules.

The oxygen atom has a negative charge, while the hydrogen atom on one side has a positive charge.The water molecule can more easily attach to various compounds thanks to these charges.

To learn more about universal solvent refer to:

https://brainly.com/question/1834245

#SPJ1

Because it can dissolve a greater variety of chemicals than any other natural liquid, water is referred to as a "universal solvent," though it does not dissolve all substances. The option  C is true.

In comparison to other liquids, water has a much larger spectrum of natural solvent qualities, earning it the moniker "universal solvent". Nevertheless, not all substances can be dissolved by water.

Because water is not highly soluble in oppositely charged particles, it cannot dissolve hydroxides, fats, or waxes, for example. Water molecules have polar arrangements of the hydrogen and oxygen atoms.

In contrast to the hydrogen atom on one side, which has a positive charge, the oxygen atom has a negative charge.

These charges allow the water molecule to more readily bind to different substances.

For more information about universal solvent kindly visit to brainly.com/question/1834245

#SPJ1

The argument that supports the claim that dissolving solid calcium chloride (CaCl2) in water is a chemical change is A. The ionic bond among calcium and chloride ions has been broken..

When solid calcium chloride is added to water, the ionic bonds between the calcium ions (Ca2+) and chloride ions (Cl-) are broken apart by the polar water molecules. The calcium ions and chloride ions are then surrounded by the water molecules, forming a new chemical compound called calcium chloride hydrate (CaCl2*xH2O) which is different from the original solid calcium chloride. This process is a chemical change because it creates new substances and the original chemical bonds are broken and new bonds are formed.

Learn more about chemical compound here:

https://brainly.com/question/11527546

#SPJ4

the complete question is:

Which of the following arguments supports the claim that dissolving calcium chloride (CaCl2) in water results in a chemical change?

A. The ionic bond among calcium and chloride ions has been broken.

B. By evaporating the water, the solid calcium chloride can be recovered.

C. The ions found in the solid remain in the solution and have not changed.

D. Ions are attracted by the polar water molecules.

Physical properties  such as  mass, weights , density can be common for one or more substances hence cannot be used for identification while magnetism is unique for each substance ,hence used for identification.

Any property which describes the state of a physical system is called as a physical property.Changes in physical properties are used to describe changes between the states. They are often related to as observable properties.

Physical property which can be quantified is a physical quantity. These are also classified further with respect to their directionality. Physical properties are differentiated from chemical properties by the way they determine how a substance behaves in a chemical reaction.

Learn more about physical properties,here:

https://brainly.com/question/18327661

#SPJ1

Answer:

The gases produced escaped to the atmosphere.

The energy that is released for the breaking of bonds is 229 kJ/mol.

We should be able to recall that the enthalpy of the reaction taken to be the energy that is evolved or absorbed in the reaction that is ongoing. We have to note that in the course of the reaction there would be the breaking and the making of bonds.

Now we know that;

The bond energy can be given as;

Sum energy of the broken bonds of reactants  - Sum of the energy of the formed bonds

Hence;

(945 + 498) - 2(607)

1443 - 1214

= 229 kJ/mol

Learn more about enthalpy:https://brainly.com/question/13996238

#SPJ1

The gas in a 250.0 mL piston experiences a change in pressure from 1.00 atm to 4.90 atm. 56.2 ml is the new volume (in mL) assuming the moles of gas and temperature are held constant.

Boyle's law states that at a given temperature, the volume of a gas and its pressure are inversely proportional.

Robert A. Boyle discovered the law in 1662, which states that at a constant temperature, the volume of a gas is inversely proportional to the pressure exerted by the gas.

Given:

Initial volume (V₁) = 250 mL

Initial pressure (P₁) = 1.00 atm

Final volume (V₂) = ?

Final pressure (P₂) = 4.45 atm

Assuming the gas has an ideal behavior, we can find the final volume by using Boyle's law as follows:

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1.00 atm × 250 mL / 4.45 atm

V₂ = 56.2 ml

Thus, 56.2 ml  is the new volume (in mL) assuming the moles of gas and temperature are held constant.

To learn more about the Boyle's law, follow the link;

https://brainly.com/question/30367067

#SPJ1

The electrons in the 2p sub level have the smallest binding energies, which is the best explanation for how the spectrum is consistent with the electron shell model of the atom. Option D is correct as a result.

Photoemission spectroscopy, often referred to as photoelectron spectroscopy, measures the amount of energy emitted by electrons from solids, gases, or liquids via the photoelectric effect. This procedure involves getting the energy for the electrons from an outside source, such as sunlight.

The photoelectric effect is a process in which electrons receive energy from an external source, such as sunlight, become excited, and transition from the ground state to the excited state. As a result of this process, there is a constant flow of electrons, which in turn causes a flow of energy.

Learn more about spectrum here:

https://brainly.com/question/11837978

#SPJ4

There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.

Explanation:

For i2+na2s2o3 titration,

I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2

13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.

Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.

So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.

For oxidizing the ascorbic acid to dehydroascorbic acid

C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-

SO 1mole of I2 read for 1 mole of C6H8O6.

Initial I2 used = 50*0.01023 = 0.5115 millimoles.

Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.

Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.

Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg

In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.

To learn more about ascorbic acid visit;

https://brainly.com/question/14793819

#SPJ4

The value of the ΔH for the reaction is obtained as 1278 kJ .

We have to note that the enthalpy change of the reaction has to do with the heat that ahs been evolved or absorbed in a reaction. In this case we have to obtain the enthalpy change by looking at the combustion reaction that has been shown here.

It is clear that from the thermochemical reaction equation, there is the evolution of about 1278 kJ of heat in the process of the reaction as shown in the question that we have above.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

answer :

this is the structure if you want it

Using the Ideal Gas Law equation: [tex]PV=nRT[/tex]

STP also known as Standard Temperature  and Pressure is a set of conditions at sea level

At STP:

P = 101.3 kPa

T = [tex]0^o C[/tex] or 273 K

[tex]n=\frac{PV}{RT}[/tex]

[tex]n=\frac{101.3kPa)(3.7L)}{(8.31\frac{kPaL}{molK})(273K)}[/tex]

[tex]n = 0.16 mol[/tex]

The reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.

The primary difference between metals is the ease with which they undergo chemical reactions. The elements toward the bottom left corner of the periodic table are the metals that are the most active in the sense of being the most reactive. Such as alkali metals like Lithium, sodium, and potassium all react with water, thus they are reactive in nature than the metals belonging to alkaline earth metals. The nature of more reactivity of alkali metals is due to larger atomic radius and low ionization energies and they have only one valence electron in its outermost shell.

Thus, the reactivity of metals depends upon their position in the periodic table and their nature of undergoing chemical reactions.

To learn more about metals check the link below:

https://brainly.com/question/4701542

#SPJ4

In the experiment with boiling water and the experiment in which magnesium was added to hydrochloric acid both resulted in gas formation.

Hydrochloric acid and magnesium in a balanced chemical reaction

[tex]MgCl_{2}[/tex] + [tex]H_{2}[/tex] = Mg + 2HCl (g).

A gas is hydrogen . This reaction is exothermic (energy is released). New compounds are being produced due to chemical change.

Nothing new is created when water is heated to a boil. Heat is added in this endothermic reaction. Gas is steam. Both experiments a gas is released. One is a chemical change the other is a physical change. One is exothermic while other is endothermic.

Learn more about Exothermic

brainly.com/question/1324479

#SPJ4

The half-life of a radioactive isotope is the time it takes for half of the original number of atoms in a sample to decay.

The isotope with the shortest half-life among the given options is:

D) carbon-14

The half-life of carbon-14 is 5,730 years which is shorter than the other isotopes. Uranium-238 has a half-life of 4.5 billion years, potassium-40 has a half-life of 1.25 billion years and rubidium-87 has a half-life of 49.8 billion years, all are greater than the half-life of carbon-14.

So, carbon-14 is the isotope with the shortest half-life among the given options.

It is important to note that the half-life of an isotope is a constant property of the isotope. For example, the half-life of carbon-14 is always 5,730 years and does not change with the amount of carbon-14 present or any other factors.

Learn more about Half-life reactions here: https://brainly.com/question/29604077

#SPJ4

The volume is decreased to 0. 50L, the number of moles of SO₂Cl₂at equilibrium will increase by 1–10% option - a is correct.

The guiding idea of Le Chatelier is as follows: A shift in the position of the equilibrium results from a change in one of the variables that characterize a system in equilibrium and cancels out the effects of that change.

Now to solve this question first we have to know the Le-chatelier's

Principle

The Principal that if a system in chemical equilibrium is subjected to a disturbance it tends to change in a way that opposes this disturbance.

SO₂Cl₂(g) ⇄ SO₂(g) + Cl₂(g)

Initially, there is one molecule at the left hand side of the reaction and two molecules are on the right. But, the Partial pressure of molecules on RHS is lower than LHS. Concentration of RHS molecules is Lower, forward reaction is more favorable.

Decreasing volume would result in increasing the total pressure.

Now, according to Le chatelier's Principle, the equilibrium will shift in such a way to oppose change under compression. Since there are more moles of Products than reactants, to counteract the increased pressure. The equilibrium will shift to LHS increasing the moles

of SO₂Cl₂ but since the concentration (Partial Pressure)

of SO₂Cl₂, it will not increase more than 10%

Hence, answer will be (a) Increase 1-10%.

To know more about Le Chatelier's principle visit:

https://brainly.com/question/29009512

#SPJ4

Reactions that are reversible have the ability to move both forward and backward. Reactants change into products in a reversible reaction, but products can also change back into reactants.

In actuality, the opposing reaction as well as the forward reaction will occur simultaneously. In some chemical reactions, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D. Only in one direction can irreversible chemical reactions take place. Reactants can transform into products, while products cannot transform back into reactants. Chemical reactions that can be reversed can happen both ways. The products can change back into the reactants, and the reactants can change back into the products.

Learn more about chemical :

brainly.com/question/70429

#SPJ4

The size of an ion is determined by its atomic radius, which is a measure of the size of the atom from which the ion is formed. The atomic radius of an atom is generally determined by the size of its electron cloud. The size of the electron cloud is influenced by the number of electrons and the energy levels they occupy.

Of the ions given, Li+ has the smallest atomic radius because it has the smallest number of electrons and the highest effective nuclear charge, which means that its electrons are held more closely to the nucleus. Na+, K+, and CS+ have larger atomic radii than Li+ because they have more electrons and lower effective nuclear charges, which means that their electrons are held more weakly by the nucleus.

Therefore, the answer is CS+ has the largest radius.

1. Kidney receive the waste product carried by the blood.

2. Homeostasis is the ability to maintain a relatively stable internal state that persist despite changes in the world outside.

3. The respiratory system and circulatory system work together by exchanging of oxygen and carbon dioxide.

4. Oxygen is a gas that the body needs.

5. Chemical signals are carried out by circulatory system that control the speed of digestion.

6. Oxyhemoglobin is a combination of hemoglobin and oxygen that enters in the body.

7. The respiratory system and digestive system work as it absorbed oxygen that being distributed through the body.

8. The respiratory system is responsible for exchange of gases.

9. The circulatory system carries nutrients to the entire body cells.

10. The digestive system is responsible for food digestion.

Learn more about circulatory system visit:

brainly.com/question/29773718

#SPJ4

Energy is released when glycolysis occurs, and this energy is utilized to create four molecules of ATP. As a result, glycolysis produces a net gain of two ATP molecules.

The metabolic mechanism that transforms glucose to pyruvate is known as glycolysis. This free energy is utilized to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of 10 enzyme-catalyzed processes. The initial stage in the breakdown of glucose to extract energy for cellular metabolism is glycolysis. Glycolysis is divided into two phases: energy-requiring and energy-releasing. Glycolysis is the process of breaking down glucose to create energy. It generates two pyruvate molecules, ATP, NADH, and water. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms.

Here,

When glycolysis happens, energy is released, and this energy is used to build four molecules of ATP. As a result of this, glycolysis generates a net gain of two ATP molecules.

To know more about glycolysis,

https://brainly.com/question/14076989

#SPJ4

The standard form of scientific notation for 0. 010x 10e5 is 1.0 × 10^3.

Scientific notation is a form of presenting large numbers or very small numbers in a simpler form.

There are some rules to write scientific notation:

The base should be always 10. The exponent must be a non-zero integer.

Absolute value of the coefficient should be greater than or equal to 1 but it should be less than 10.The mantissa carries the rest of the significant digits of the number.

The power of 10 will be positive, if the given number is multiples of 10 then the decimal point has to move to the left. The power of 10 will be negative If the given number is smaller than 1 and then the decimal point has to move to the right.

If you need to learn more about scientific notation, click here

https://brainly.com/question/18073768?referrer=searchResults

#SPJ4

​

The element with electronic configuration 2s1, which is lithium, has a violent reaction with cold water.

The most reactive metals in the periodic table are the alkali metals (Li, Na, K, Rb, Cs, and Fr); they all react with cold water violently or even explosively, displacing hydrogen. In the reduction of water to hydrogen gas (H2) and the metal ion hydroxide (OH), Group 1 Metal (M) is oxidised to its metal ions.

The second most reactive metals in the periodic table are the alkaline earth metals (Be, Mg, Ca, Sr, Ba, and Ra), which also exhibit increased reactivity in higher periods like the Group 1 metals. The only alkaline earth metal that does not react with water or steam, even when heated to a high temperature, is beryllium (Be).  Furthermore, beryllium has an exterior oxide layer that is robust, which reduces its reactivity at lower temperatures.

To know more about periodic table from the link

brainly.com/question/15987580

#SPJ4

The triple point of a substance is the temperature and pressure at which all three phases of the substance (solid, liquid, and gas) can coexist in equilibrium.

Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines, which indicates that all three phases can coexist in equilibrium at this point.

1. A triple point of a substance is the temperature and pressure at which all three phases of the substance can coexist in equilibrium.

2. Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines.

3. This indicates that all three phases can coexist in equilibrium at this point.

4. Therefore, the correct statement is that Point B represents the triple point for Bo.

learn more about triple point here

https://brainly.com/question/519191

#SPJ4

A gas mixture containing oxygen, nitrogen, and He has a total pressure of 189.9 kPa. If PO2 = 104.6 kPa and PN2 = 13.0 kPa, PHe is 72.3 kPa.

Static pressure and velocity pressure are added to create total pressure. There is static pressure in a fluid that is not flowing. The pressure required to accelerate air from a zero velocity to a specific velocity that is proportional to the kinetic energy of the air stream is known as velocity pressure.

Consider the friction that exists between a fluid and the interior surface of a pipe. The fluid's density and velocity are used to compute the dynamic pressure: the total pressure in a mixture of ideal gases is the total of the partial pressures of the individual gases.

Total pressure = PO2  + PN2 + PHe

189.9 kPa = 104.6 kPa + 13.0 kPa + PHe

PHe = 72.3 kPa

Thus, A gas mixture containing oxygen, nitrogen, and He has a total pressure of 189.9 kPa. If PO2 = 104.6 kPa and PN2 = 13.0 kPa,PHe is  72.3 kPa.

To learn more about total pressure, follow the link;

https://brainly.com/question/15060031

#SPJ1

Chemical Indicator refers to a substance that changes color when there is a certain concentration of hydrogen ions in a solution.

Chemical indicators are any substances that provide a clear indication—typically a change in color—of the presence or absence of a certain chemical species, like an acid or an alkali, in a solution. One such chemical is methyl yellow, which gives an alkaline solution a yellow color. When introduced to acidic or alkaline solutions, substances are considered indicators when their color changes. There are several indicators that are frequently used in laboratories, including litmus, phenolphthalein, and methyl orange. Litmus paper: It turns red in acidic solutions and blue in basic ones. Methyl orange: This chemical exhibits a red color in an acidic solution and a yellow color in a basic solution.

Learn more about Chemical indicators

brainly.com/question/13748767

#SPJ4