Answer: For a pull box housing shielded conductors carrying over 1000V and used in an angled pull, the distance between a conductor entry and exit must be 36 times the outside diameter.
Explanation: To find the correct explanation to the question, we have to find more about the pull box housing shielded conductors.
What is pull box?Pull box is an underground electrical container, that made up of composite materials that used in traffic signal installation and also provide access to underground detectors as well as interconnected cables. These are used to simplify the wiring installation. What are the types of pull boxes?There we have two types of pull boxes, such as, one is for straight pulls and the other is for angle or U pulls.For straight pulls the length of the box shall not be less than 48 times the outside diameter of the cable.Angled pulls can be again classified as, Distance to opposite wall, Distance between entry and exit and removable sides.The distance between a conductor entry and exit from the box shall not be less than 36 times the outside diameter of the conductor.Thus, we can conclude that, for a pull box housing shielded conductors carrying over 1000V and used in an angled pull, the distance between a conductor entry and exit must be 36 times the outside diameter.
Learn more about the electromagnetic induction here:
https://brainly.com/question/28027151
#SPJ4
A speed skater moving across frictionless ice at 8.0 m/s hits a 5.0-m-wide patch of rough ice. She slows steadily, then continues on at 6.0 m/s. What is her acceleration on the rough patch
Her acceleration on the rough patch is 2.8m/s².
To find the answer, we need to know about the Newton's equation of motion.
What are the Newton's equation of motion?These are as follows
V= U +atS = Ut+1/2 at²V²-U²= 2aSV= Final velocity
U = initial velocity
t= time
S= distance
What will be acceleration if initial velocity, final velocity and distance are 8 m/s , 6 m/s and 5m respectively?Here U= 8 m/s, V = 6 m/s and S = 5mSo, 6²-8²= 2a× 5=10a36-64 = 10a
-28= 10 a
a= -28/10= -2.8 m/s²
Negative sign indicates the decrease of acceleration.Thus, we can conclude that the acceleration on the patch is 2.8 m/s².
Learn more about the Newton's equation of motion here:
brainly.com/question/8898885
#SPJ4
A vehicle starts from rest and accelerates uniformly for 12 seconds to a
velocity of 10ms1. It then runs at a constant velocity and is finally came to rest
in 66m with constant . The total distance covered by the vehicle is
580m. Find the value of acceleration and the time taken.
The value of the acceleration is 0.76 m/s² and the total time taken by the vehicle is 39 seconds.
Acceleration of the vehicleThe acceleration of the vehicle before coming to rest is calculated as follows;
v² = u² + 2as
where;
v is the final velocityu is the initial velocitya is the accelerations is the distance traveled before stoppingthe car came to rest with constant velocity attained after 12 seconds.
the initial velocity of the car before 12 seconds is zero.
v² = 0 + 2as
a = v²/2s
a = (10²)/(2 x 66)
a = 0.76 m/s²
Time of motion of the vehicled = ut + ¹/₂at²
where;
d is the total distance traveledt is the time of motiona is accelerationu is initial velocity of the vehicle580 = 0 + ¹/₂(0.76)t²
580 = 0.38t²
t² = 580/0.38
t² = 1,526.3
t = √1,526.3
t = 39 seconds
Thus, the value of the acceleration is 0.76 m/s² and the total time taken by the vehicle is 39 seconds.
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
Calculate the frequency of the 3rd harmonic of a 0.5 meter string with a linear density of 0.03 kg/m at a tension of 50 newtons.
Frequency of third harmonic is 122.48 HZ
Theory:
Frequency of third harmonic with length L , linear density μ , Tension
T is given as
fₙ= n v/2L
fₙ = n/2L × √T/√μ
plugging in the values here-
fₙ = 3/ 2×0.5 × √50 / √0.03
fₙ = 122.48 Hz
Thus, the frequency of third harmonic is 122.48 HZ
Learn more about frequency here:
https://brainly.com/question/14888403
#SPJ4
What is the current flowing through the circuit shown? (V= 120 V, R₁ = 20 02,
R₂= 50 Q, R3= 1022) (Ohm's law: V = IR)
R₁
ww
ww
R₂
ww
R₂
Assumed that resistors are connected in series .
R_net=20+50+10=80ohm Voltage=V=120VCurrent=I
V/R120/803/21.5AWhile standing at the top of an 100 m high observatory, you accidentally dropped your phone through the grates (it is now falling straight down to the ground). a. What is the velocity of the phone after 4.0 s? b. How far does the phone fall during this time? C. Will your phone hit the ground? If not, how long more before it hits the ground?
Using the idea of motion under gravity, it will take 0.5 seconds more before the phone hits the ground.
What is the distance covered?The distance covered is obtained form the equations of kinematics under gravity.
Now;
v = u + gt
Recall that it was dropped from a height hence u = 0 m/s
v = gt
v = 9.8 m/s^2 * 4 s
v = 39.2 m/s
Now;
h = ut + 1/2gt^2
but u = 0 m/s
h = 1/2gt^2
h = 1/2 * 9.8 * (4)^2
h = 78.4 m
The phone will not hit the ground within this time
For the phone to hit the ground;
h = 1/2gt^2
if h = 100 m
100 = 1/2 * 9.8 * t^2
2 * 100/9.8 = t^2
t = √2 * 100/9.8
t = 4.5 seconds
It will take about 0.5 seconds more before the phone will hit the ground.
Learn more about motion under gravity:https://brainly.com/question/15120445
#SPJ1
Without using afood flask, suggest another ways would you keep food warm a till to the hospital
Another way to keep food warm till you arrive at the hospital is by putting the food in a foil and wrapping it up with a towel to retain the heat.
What is Food preservation?Food preservation is defined as the process by which a cooked food or process food is kept in such a way that microorganisms cannot affect their taste and texture.
To prevent a cooked food from getting cold, you can put the food in an aluminium foil and wrap it with a towel to prevent heat loss.
Learn more about food preservation here:
https://brainly.com/question/16972821
#SPJ1
If the radio waves transmitted by a radio station have a frequency of 79.5 MHz, what is the wavelength of the waves, in meters
If the radio waves transmitted by a radio station have a frequency of 79.5 MHz, the wavelength of the waves, in meters is 3.77m.
What are radio waves?The electromagnetic spectrum's longest wavelengths, which are found in radio waves, are normally found at frequencies of 300 gigahertz. They may be reflected and refracted to change direction, and they do not harm the human body if they are absorbed by it. They are perfect for communicating due to their characteristics.What are Frequency and wavelength?When describing the temporal rate of change seen in oscillatory and periodic phenomena like mechanical vibrations, radio waves, and light, frequency is a crucial parameter utilized in science and engineering.The length of a waveform signal that is propagating in space or over a wire is measured by the separation between identical points (adjacent crests) in the adjacent cycles. Frequency, or the number of wave cycles per second, is inversely related to wavelength.Given: Velocity of light, c = 3.00 x 10⁸ m/s m/s
Frequency, f = 7.95 x 10⁷/s
For wavelength, the required formula is
[tex]λ = c/ f \\λ = 3 * 10 ^{8} / 7.95 * 10^{7} \\λ = 3.77[/tex]
Hence, the required wavelength is 3.77 meters.
To learn more about frequency and wavelength refer to:
https://brainly.com/question/12924624
#SPJ4
In which of the following scenarios is the total momentum of the system conserved?
Answer:
The total momentum of a system is conserved only when the system is closed.
Explanation:
4. An applied force of 6.2 N acts on a 2.1-kg object, pushing it horizontally across a surface
where the coefficient of kinetic friction is 0.15.
a. Draw a free body diagram for the body
b. Determine the frictional force acting.
c. Determine the net force acting on the body
d. Determine the object's acceleration.
Step by step, thank you
[2C]
[2A]
[2A]
[2A]
The frictional force on the body is 0.25 N the net force on the body is 5.95 N while the acceleration produced is 2.83 m/s^2
What is the net force?The net force is used to describe the resultant force that acts on the object.
The frictional force that acts on the object s obtained from;
Ff = 0.15 * 2.1-kg * 9.8 m/s^2
Ff = 0.25 N
The net force that acts on the body = F - Ff where F is the applied the force
= 6.2 N - 0.25 N
Net force = 5.95 N
Now;
Net force = ma
a= Net force /m
a = 5.95 N/2.1-kg
a = 2.83 m/s^2
Learn more about the net force:https://brainly.com/question/18031889
#SPJ1
Two objects, m1 = 0.6 kg and m2 = 4.4 kg undergo a one-dimensional head-on collision
Their initial velocities along the one-dimension path are vi1 = 32.4 m/s [right] and vi2 = 8.6 m/s [left].
The two objects stick together after the perfectly inelastic collision
a) Calculate the velocity after the collision.
b) Determine how much kinetic energy is lost due to the collision
Explanation:
Hello !
look at the attachment above ☝️ and if you have any questions your welcome.
a) The velocity after the collision.is 11.456 m/s.
b) The kinetic energy lost due to the collision is 44.564 J.
What is conservation of momentum principle?When two bodies of different masses move together each other and have head on collision, they travel to same or different direction after collision.
The external force is not acting here, so the initial momentum is equal to the final momentum. For inelastic collision, final velocity is the common velocity for both the bodies.
m₁u₁ +m₂u₂ =(m₁ +m₂) v
Given are the two objects, m1 = 0.6 kg and m2 = 4.4 kg undergo a one-dimensional head-on collision. Their initial velocities along the one-dimension path are vi1 = 32.4 m/s [right] and vi2 = 8.6 m/s [left].
(a) Substitute the values, then the final velocity will be
0.6 x32.4 +4.4 x 8.6 = (0.6+4.4)v
v = 11.456 m/s
Thus, the velocity after collision is 11.456 m/s.
(b) Kinetic energy lost due to collision will be the difference between the kinetic energy before and after collision.
= [1/2m₁u₁² +1/2m₂u₂² ] - [1/2(m₁ +m₂) v²]
Substitute the value, we have
= [1/2 x 0.6 x32.4² + 1/2 x4.4 x 8.6²] - [1/2 x(0.6+4.4)11.456²]
= 44.564 J
Thus, the kinetic energy lost due to the collision is 44.564 J.
Learn more about conservation of momentum principle
https://brainly.com/question/14033058
#SPJ2
A series combination of a 48.0-mF capacitor and a resistor are connected to a 12-V battery. After one second, the voltage across the capacitor is 10 V. What is the resistance of the resistor
The resistance of the resistor is .
Given:- A series combination of a 48.0-mF capacitor and a resistor are connected to a battery. After one second, the voltage across the capacitor is .
To Find:- We have to find the value of the resistance of the resistor.
By using the concept of the resistance it will be solved.
According to the problem,
The value of the resistance of the resistor is .
#SPJ4
A 500 N weight is hung at the middle of a rope attached to two buildings at the same level. If the breaks in the tension exceed 1800 N, what is the minimum angle the rope can make with the horizontal? Group of answer choices 4o 8o 11o 18o
Answer:
The correct choice is 8o.
Explanation:
The given weight is hanging at the mid point of the rope and the buildings are at the same level, Obtain the given equation by equating the vertical components of force,
2Tsin(φ)=W
where φ is the angle made by rope with the horizontal.
Given T=1800 N and W=500 N, the value of φ is calculated as follows,
2*1800*sin(φ)=500
sin(φ)=0.1388
φ=7.90
φ≈8o
Check out similar questions.
brainly.com/question/13735944
#SPJ10
A glass optical fiber is used to transport a light ray across a long distance. The fiber has an index of refraction of 1.510 and is submerged in water, which has an index of refraction of 1.333. What is the critical angle (in degrees) for the light ray to remain inside the fiber
The answer is 73.13°.
According to snell's law,
n1sinθi = n2sinθr
n1/n2 = sinθr/sinθi
The critical angle is the angle of incidence at the denser medium when the angle of incidence at the less dense medium is 90°
This means i=C and r = 90°
The Snell's law formula will become
n1/n2 = sinC/sin90°
n2/n1 = 1/sinC
Where n1 is the refractive index of the less dense medium = 1.473
n2 is the refractive index of the denser medium = 1.540
Substituting the values in the formula,
1.540/1.473 = 1/sinC
1.045 = 1/sinC
SinC = 1/1.045
SinC = 0.957
C = sin^-1(0.957)
C = 73.13°
The refractive index of glass is 1.5. It way that the velocity of mild in glass is 1.5 times slower than the rate of mild in a vacuum, the speed of light in glass isn't always unbiased of the shade of mild.
Refractive index is likewise the same as the velocity of light c of a given wavelength in an empty area divided with the aid of its speed v in a substance or n = c/v.
The index of refraction of fabric is a ratio that compares the velocity of light in a vacuum ( c=3.00x108ms ) to the velocity of mild in that precise medium. Because the index of refraction increases, the amount that the material bends the mild increases.
Learn more about the index of refraction here https://brainly.com/question/12469161
#SPJ4
The critical angle (in degrees) for the light ray to remain inside the fiber is 73.13°.
According to snell's law,
n1sinθi = n2sinθr
n1/n2 = sinθr/sinθi
The critical angle is the angle of incidence at the denser medium when the angle of incidence at the less dense medium is 90°.
This means i=C and r = 90°
The Snell's law formula will become
n1/n2 = sinC/sin90°
n2/n1 = 1/sinC
Where n1 is the refractive index of the less dense medium = 1.473
n2 is the refractive index of the denser medium = 1.540
Substituting the values in the formula,
1.540/1.473 = 1/sinC
1.045 = 1/sinC
SinC = 1/1.045
SinC = 0.957
C = sin^-1(0.957)
C = 73.13°
Learn more about critical angle here https://brainly.com/question/15009181
#SPJ4
You look in the sky and see two jetliners that you know are of equal size, yet one appears to be much larger. Because of your knowledge of __________, you will assume that the smaller jetliner is farther away
Answer:
Because of the knowledge of relative size, it will be assumed that the smaller jetliner is farther away.
Explanation:
According to the theory of relative size, the distance that an object has to the viewing individual affects the perception of the individual regarding the size of the object.
As stated in this case, one of the jetliners is farther away from the other. Therefore, even if the jets are of equal size, the one that is at a greater distance is perceived to be smaller as it is at a greater viewing range. The one that is nearer to the individual seems bigger in comparison to the one farther away due to a closer viewing range.
Therefore, the jet that is nearer appears larger.
To know more about relative size, refer to:
https://brainly.com/question/19998265
#SPJ4
Answer the following questions.
1. What is the velocity of a car that traveled a total of 75 kilometers north in 1.5 hours?
2. What is the velocity of a plane that traveled 3,000 miles from New York to California in 5.0 hours?
3. John took 45 minutes to bicycle to his grandmother's house, a total of four kilometers. What was his speed in km/hr?.
4. It took 3.5 hours for a train to travel the distance between two cities at a speed of 120 miles/hr. How many miles lie between the two cities?
3.if time=45mins,D=4km,2700secs,4000m then. S=d/t S=1.4m/s
A brightfield microscope equipped with a ____________ ___________ stop is able to block light from the illuminator creating bright objects on a dark background.
Answer: A Brightfield microscope equipped with an opaque light stop is able to block light from the illuminator and creating bright objects on a dark background.
Explanation: To find the correct statement about Brightfield microscope, we need to know more about the Brightfield microscope.
what is Brightfield microscope?The Brightfield microscopic technique is generally used with the compound microscopes and, these are one, among the widely used optical illumination techniques. The Brightfield microscope or Compound light microscope is an optical instrument, which uses light rays and produces dark images with a bright background.How Bright field microscope works?A brightfield microscope equipped with a opaque light stop, will produce bright objects on a dark background by blocking the light illuminated from the light source. This opaque light stop, blocks the light rays that arising from the illuminator to the objective lenses and, only allows the reflected or transmitted light of the specimen. As a result, we get bright objects with a dark background.Thus, we can conclude that, A Brightfield microscope equipped with an opaque light stop is able to block light from the illuminator and creating bright objects on a dark background.
Learn more about the Brightfield microscope here: https://brainly.com/question/28019837
#SPJ4
If you place a 3.5-kg object on a spring which has a spring constant 144-N/m, and stretch the spring so the object starts oscillating. How much time does it take to complete one cycle
Answer:
M = 3.5 kg mass of object
F = - K x where K is the spring constant
K = 144 N/m
ω = (K/M)^1/2 for simple harmonic motiom
ω = (144 kg/s^2 / 3.5 kg)^1/2 = 6.41 / sec
f = ω / (2 * π) = 1 / P
P = (2 Π / ω) = 2 * 3.14 / 6.41 sec
P = .98 sec
Check: f = 1 / P = 1.02 /sec
ω = 2 * π * f = 2 * 3.14 * 1.02 = 6.41 sec
A box with a mass of 2 kg only has four forces acting on it: One force of 16 N due East. One force of 24 N due South. One force of 16 N due West. One force of 18 N due North. What is the magnitude of the box's acceleration, in m/s2
Answer:
The acceleration of the object is 3 m/s2.
Explanation:
The force on the object is acting along the four directions which are perpendicular to each other. Since the north and south directions are opposite to each other, the magnitude of the net force along north-south direction is (24-18)=6 N.Since the east and west directions are opposite to each other, the magnitude of the net force along east-west direction is (16-16)=0 N.Therefore the magnitude of the net force on the object is 6 NBy Newton's second law, the force F on the object is given by the formula F=ma. Here m= 2kg, therefore 6 =(2)a which gives a = 3 m/s2.Learn more about Newton's law.
brainly.com/question/13447525
#SPJ10
(picture attached) use grass method
4. A block of unknown substance is submerged in water. A light ray in the water strikes the angle of 16°, what is the index of refraction of the unknown substance? (nwater = 1.33) substance at an angle of 45° from the normal. If the refracted ray in the substance is at an 5. If a light ray passes from a substance with low index of refraction to another substance with high index of refraction, will the ray bend away from or closer to the normal? Why? 6. What is the angle of refraction? n₁=1 24° n₂ = 1.8
Answer:
Explanation:
Step 1
1 of 2
\textbf{Given}Given
n_{w}=1.33n
w
=1.33
$\theta_w=31\text{ ^\circ
∘
}$
$\theta_b=27\text{ ^\circ
∘
}$
\textbf{Approach}Approach
In this problem we are going to use Snell's law.
\textbf{Solution}Solution
The definition of Snell's law of refraction is
\begin{align} {n_1\cdot\sin \theta_1}={n_2\cdot \sin \theta_2} \end{align}
n
1
⋅sinθ
1
=n
2
⋅sinθ
2
where indexes 11 and 22 represent two different mediums. Since the motion is in the water we write
\begin{align} &{n_{w}\cdot\sin\theta_{w}}={n_{b}\cdot\sin\theta_{b}} \\ &{n_b}={n_{w}\cdot \frac{\sin\theta_{w}}{ \sin \theta_{b}} } \\ &{n_b}={1.33\cdot \frac{\sin31^\circ}{ \sin27^\circ} } \\ &\boxed{{n_b}=1.5} \end{align}
n
w
⋅sinθ
w
=n
b
⋅sinθ
b
n
b
=n
w
⋅
sinθ
b
sinθ
w
n
b
=1.33⋅
sin27
∘
sin31
∘
n
b
=1.5
The density of a certain type of plastic is 0.77 g/cm3. If a sheet of this plastic is 10.0 m long, 1.0 m wide, and 1 cm thick, what is its mass
Mass is 77,000 g
Given
The density of a certain type of plastic = 0.77 [tex]$\mathrm{g} / \mathrm{cm}^{3}$[/tex]
Length = 10.0 m = 1000 cm
Width = 1 m = 100 cm
Thickness = 1 cm
FormulaVolume = length x width x thickness
Mass = Density x Volume
ExplanationDensity
Density is how much "stuff" is contained in a specific quantity of space is determined by its density. For instance, a block of the harder, lighter element gold (Au) will be denser than a block of the heavier element lead (Pb) (Au). Styrofoam blocks are less dense than bricks. Mass per unit volume serves as its definition.Volume V = 1000 x 100 x 1
V = 100,000 [tex]cm^{2}[/tex]
Mass M= 0.77 [tex]$\mathrm{g} / \mathrm{cm}^{3}$[/tex] x 100,000 [tex]cm^{2}[/tex]
M = 77,000 g
So, Mass is 77,000 g
Learn more about this problem here:
https://brainly.com/question/598902
#SPJ4
calculate the kinetic energy of 200kg object that is moving with a speed 15ms.
Answer:
See below
Explanation:
Kinetic Energy = 1/2 * m * v^2
= 1/2 * 200 * (15)^2 = ________ joules
The kinetic energy of the 200 kg object moving with a speed of 15 m/s is 11250 Joules (J).
Given:
Mass of the object (m) = 200 kg
Speed of the object (v) = 15 m/s
For the kinetic energy (KE) of an object, we use the formula:
KE = (1/2) × m × v²
where:
KE is the kinetic energy,
m is the mass of the object,
v is the speed of the object.
The kinetic energy of the object:
KE = (1/2) × 200 × (15 )²
KE = (1/2) × 200 × 225
KE = 11250
KE = 11250 Joules (J)
Therefore, the kinetic energy of the 200 kg object moving with a speed of 15 m/s is 11250 Joules (J).
To know more about kinetic energy:
https://brainly.com/question/30107920?referrer=searchResults
#SPJ3
_____________is the addition of wave energy as waves interact, producing larger waves and ____________ is the subtraction of wave energy as waves interact, producing smaller waves.
Constructive interference is the addition of wave energy as waves interact, producing larger waves and destructive interference is the subtraction of wave energy as waves interact, producing smaller waves.
To find the answer, we need to know about the interference of waves.
What's the interference of waves?Interference of waves is the result of superposition of waves (transverse or longitudinal) at a certain place. Interference is of two typesConstructive interferenceConstructive interferenceDestructive interferenceHow are the constructive and destructive interference formed?When two waves are superimposed within the phase, then constructive interference pattern is formed.When two waves are superimposed with out of phase, destructive interference pattern is found.Thus, we can conclude that the constructive interference is the addition of wave energy and destructive interference is the subtraction of wave energy.
Learn more about the interference of waves here:
brainly.com/question/12466679
#SPJ4
Which statement is true of a piece of ice at 0°C that is put into a freezer at
-18°C?
The statement which is true about a piece of ice at 0°C which is put into a freezer at -18°C is it having the temperature of the freezer.
What is Temperature?This is referred to the degree of hotness or coldness of a body and the unit is Celsius or Kelvin.
The ice at 0°C will experience a change in temperature of the freezer when put in it in this scenario.
Read more about Ice here https://brainly.com/question/2267329
#SPJ1
. A man of mass 80 kg stands in a lift, what is the reaction from the floor of the lift if the lift;A. moves upwards with steady speed. moves upwards with acceleration 0.5m/sC. moves downward with acceleration 0.4m/s(g - 9.8m/s')
The reaction of the floor is as follows:
R = 784 NR = 816 NWhat is the reaction from the floor for a man in a lift?The reaction of the floor on the man is equal to the weight of the man and the upward force.
Reaction, R = mg + maA) When the lift moves upwards with steady speed.
R = 80 * 9.8 + * 80 * 0
R = 784 N
B) When the lift moves upwards with acceleration 0.4m/s
R = 80 * 9.8 + * 80 * 0.4
R = 816 N
In conclusion, the reaction of the floor changes as the body accelerates upwards.
Learn more about reaction and weight at: https://brainly.com/question/25555136
#SPJ1
After rubbing on the apparatus, your pith pall became negatively charged. What type of charge does the apparaTapus now have
The apparatus must be Positively Charged.
Charge interaction:
As from the charge interaction we came to know that when we rub two objects together then there will be three possibility.1. opposite charge objects attract each other
2. like charge object repel each other
3. neutral object with any charges will attract each other.
These happens due to friction generated on rubbing of object which in reverse create electron and get transfer.So, In the question it said that after rubbing on apparatus pith ball
become negative charge which means it has gained the electron.
Thus, the apparatus must have lose electron and would be
positively charged.
Learn more about pith ball here:
https://brainly.com/question/1131516
#SPJ4
Throw two balls from the same height at the same time at an initial speed of 20 m/s. One is thrown vertically down, while the other is thrown vertically up. We want to find the time difference between their landing.
The time difference between their landing is 2.04 seconds.
Time of difference of the two balls
The ball thrown vertical upwards will take double of the time taken by the ball thrown vertically downwards.
Time difference, = 2t - t = t
t = √(2h/g)
where;
h is the height of fallg is acceleration due to gravityApply the principle of conservation of energy;
¹/₂mv² = mgh
h = v²/2g
where;
v is speed of the ballh = (20²)/(2 x 9.8)
h = 20.41 m
Time of motiont = √(2 x 20.41 / 9.8)
t = 2.04 s
Thus, the time difference between their landing is 2.04 seconds.
Learn more about time of motion here: https://brainly.com/question/2364404
#SPJ1
If an electron has an uncertainty in its velocity of 1.40 m/s, what is the uncertainty (in meters) in its position
Uncertainty in position:
If the electron has an uncertainty in its velocity of 1.40 m/s then the uncertainty in its position is [tex]4.14\times10^{-4} \text{ m}[/tex].
Heisenberg's uncertainty principle to calculate the required:
Step-1:
We have to apply Heisenberg's uncertainty principle to calculate the uncertainty in the position of an electron. According to the principle:
[tex]$\Delta x \Delta p \geq \frac{h}{4 \pi}$[/tex]
Here,
[tex]$\Delta x$[/tex] is the uncertainty on the position measurement
[tex]$\Delta p$[/tex] is the uncertainty on the momentum measurement
h is the Planck constant.
It is known that the momentum of a particle is calculated as, the product of the mass of the particle and its velocity.
Therefore,
p=mv
Thus the Heisenberg principle becomes:
[tex]$m \Delta x \Delta v \geq \frac{h}{4 \pi}$[/tex]
Here [tex]$\Delta v$[/tex] is the uncertainty in the velocity measurement.
It is given that, [tex]$\Delta v$[/tex]=1.40 m/s. The particle is electron here, thus the mass of the particle m=[tex]9.1 \cdot 10^{-31} \mathrm{~kg}[/tex] and the value of the Plank's constant is, h=[tex]6.62 \times 10^{-34} \mathrm{~m}^{2} \mathrm{~kg} / \mathrm{s}[/tex]
Step-2:
Substituting the values into the equation to get the value of the position uncertainty.
[tex]\Delta x \geq \frac{h}{4 \pi\times m\times \Delta v}\\\geq\frac{6.62\times10^{-34}}{4\pi \times 9.1\times10^{-31}\times1.40} \text{ m}\\\geq 4.14\times10^{-4} \text{ m}[/tex]
To know more about the uncertainty in position, refer to:
https://brainly.com/question/9574825
#SPJ4
At which points on the roller coaster is the car not moving?
A
A and E
B
B and C
C
C and D
D
D and E
The maximum potential energy of the car or the when car is not moving at points A and E; option A.
What is potential energy?Potential energy is the energy of a body due to its state or position.
In the rollercoaster motion shown, the maximum potential energy occurs when the car is no longer moving.
At different points other than at maximum potential energy, the energy is a combination of potential and kinetic energy.
The maximum potential energy occurs at A and E, at which point the car is not moving.
In conclusion, at maximum potential energy, the car is not moving.
Learn more about potential energy at: https://brainly.com/question/14427111
#SPJ1
A block of mass 60kg measures 6cm by 5cm by 4cm. Calculate i) The maximum pressure it can exert. The minimum pressure. ii) A block of mass 60kg measures 6cm by 5cm by 4cm . Calculate i ) The maximum pressure it can exert . The minimum pressure . ii )
Answer:
4.9 is the answer
Explanation:
pressure is force divided by area
force = mass x acceleration due to gravity
= 60kg x 9.8 m/s
area = length x width x height
=6 x 5 x 4
= 120
pressure = 588/120
= 4.9 pascal
The correct answer for the value of (i) Maximum pressure is [tex]24.5 \dfrac{N}{cm^2}[/tex](ii)Minimum pressure is [tex]19.6 \dfrac{N}{cm^2}[/tex].
Given:
Weight of the block: [tex]60[/tex] kg
Dimensions of the box: [tex]6 *4* 5[/tex]
Value of gravitational constant: [tex]9.8[/tex] m/s²
Now,
[tex]Pressure = \dfrac{Force}{Area}[/tex]
[tex]Force = mass*accelaration[/tex]
[tex]= 60 * 9.8[/tex]
[tex]= 588 N[/tex]
Minimum pressure is when area is maximum:
[tex]= \dfrac{588}{6*5}\\\\= 19.6 \dfrac{N}{cm^2}[/tex]
Maximum pressure when area is minimum:
[tex]= \dfrac{588}{6*4} \\\\= 24.5 \dfrac{N}{cm^2}[/tex]
Maximum and minimum pressure are [tex]24.5 \dfrac{N}{cm^2}[/tex] and [tex]19.6 \dfrac{N}{cm^2}[/tex] respectively.
Learn more about Pressure here:
https://brainly.com/question/21173163
#SPJ7
a ray of light incident on a mirror, at an angle of 45°. Another mirror is placed at an angle of 45° to the first ones as shown. Sketch the patch of the ray until it emerges from the two mirrors (2mks) 45° www.www 45°
Answer:
If the ray of light is deflected by 45 degrees by the first mirror its total deflection by mirror (I) is 90 deg. (incident = 45 and exit ray equals 45 deg)
The second mirror will cause a net deflection of 90 degrees and the total deflection will be 180 deg or in opposite direction to the incident ray.