For a one step reaction, the activation energy for the forward reaction is 40.0 kJ mol-1, and the enthalpy of reaction is -20.0 kJ mol-1. Calculate the activation energy for the reverse reaction.

Yes, there is a relationship between the [tex]OH^{-}[/tex] concentration and the pH. The pH scale measures the concentration of hydrogen ions ( [tex]H^{+}[/tex] ) in a solution.

The higher the concentration of  [tex]H^{+}[/tex] , the lower the pH. The concentration of hydroxide ions (OH-) is related to the concentration of hydrogen ions by the equation:
pH + pOH = 14
where pOH is the negative logarithm of the  [tex]OH^{-}[/tex]  concentration.

It is generally calculated as: pOH = -log_10[ [tex]OH^{-}[/tex] ]

Therefore, as the concentration of  [tex]OH^{-}[/tex]  increases, the concentration of  [tex]H^{+}[/tex] decreases, resulting in a higher pH. Conversely, as the concentration of  [tex]OH^{-}[/tex]  decreases, the concentration of  [tex]H^{+}[/tex]  increases, resulting in a lower pH.

To learn more about pH click here https://brainly.com/question/2288405

#SPJ11

The formula for the compound between Ba and O is most likely to be BaO. (Option b)

Barium (Ba) is a metal, while oxygen (O) is a nonmetal. When a metal and nonmetal combine, they form an ionic compound. In an ionic compound, the metal atom loses electrons to become a cation, while the nonmetal atom gains electrons to become an anion. The charges on the cation and anion must balance each other out in order to form a neutral compound.

The charge on a Ba ion is +2, while the charge on an O ion is -2. Therefore, in order to balance the charges, one Ba ion will combine with one O ion. The formula for this compound will be BaO, with a 1:1 ratio of Ba to O.

Learn More about compound

https://brainly.com/question/1283416

#SPJ4

Lactic acid, the end product of anaerobic metabolism of glucose during strenuous exercise, has the systematic name (S)-2-hydroxypropanoic acid. Its structure can be represented as follows:

CH3 - CH(OH) - COOH

In this structure, the chiral carbon atom is the one connected to the hydroxyl group (OH). To indicate stereochemistry, we can use wedge and hash bond tools. In the (S)-isomer, the wedge bond will be used for the OH group, while the hash bond will be used for the hydrogen atom bonded to the chiral carbon.

(S)-2-hydroxypropanoic acid:
     OH
      |
H3C - C - COOH
      |
      H

Please note that the structure is a text-based representation, and it is recommended to draw the structure on paper or using a molecular modeling software for better visualization.

As for meso compounds, they have chiral centers but are overall achiral due to the presence of an internal plane of symmetry. Lactic acid is not a meso compound, as it does not have an internal plane of symmetry.

Learn more about Lactic acid here:

https://brainly.com/question/10948414

#SPJ11

The Lewis structure for CH3CHCCH2 can be drawn as follows:

H     H
|     |
H-C=C-C≡C-H
|     |
H     H

#bonds between the red carbon and the blue carbon: 1
#bonds between the blue carbon and the green carbon: 2
#bonds between the green carbon and the grey carbon: 1


Based on this Lewis structure, you can count the number of bonds between the specified carbons:

1. If we assume the red carbon is the first carbon (leftmost), and the blue carbon is the second carbon, there is one bond between them (a single bond).
2. If we assume the blue carbon is the second carbon, and the green carbon is the third carbon, there are two bonds between them (a double bond).
3. If we assume the green carbon is the third carbon, and the grey carbon is the fourth carbon, there is one bond between them (a single bond).

So, the answers are: 1 bond, 2 bonds, and 1 bond, respectively.

Lean more about Lewis structure here:

https://brainly.com/question/20300458

#SPJ11

The total pressure inside the tank is the sum of the partial pressures of the three gases:

Total pressure = partial pressure of oxygen + partial pressure of helium + partial pressure of nitrogen

Total pressure = 35 atm of O2 + 0 atm of He + 0 atm of N2

Total pressure = 35 atm

The sum of the partial pressures of all gases in the air must equal the total pressure of the air. Therefore, the partial pressure of the remaining air is:

Partial pressure of remaining air = Total pressure - partial pressure of carbon dioxide - partial pressure of hydrogen sulfide

Partial pressure of remaining air = 0.99 atm - 0.05 atm - 0.02 atm

Partial pressure of remaining air = 0.92 atm

The partial pressures of oxygen and chlorine are given in different units. We need to convert the partial pressure of oxygen from mmHg to atm before we can add it to the partial pressure of chlorine in order to find the total pressure.

1 atm = 760 mmHg

Partial pressure of oxygen = 401 mmHg / 760 mmHg/atm = 0.527 atm

Now we can add the partial pressures of oxygen and chlorine to find the total pressure:

Total pressure = partial pressure of oxygen + partial pressure of chlorine

Total pressure = 0.527 atm + 0.639 atm

Total pressure = 1.166 atm

Thus, the total pressure is 1.166 atm.

For more details regarding pressure, visit:

https://brainly.com/question/12971272

#SPJ1

First, we need to determine which reactant is limiting. To do this, we calculate the mole ratio of F2 to NH3 in the balanced equation:

5 mol F2 / 2 mol NH3 = 2.5 mol F2 per 1 mol NH3

If we use all of the NH3 (1.11 mol), we would need 2.5 x 1.11 = 2.775 mol of F2. However, we only have 2.67 mol of F2, so F2 is limiting.

Now we can use the mole ratio from the balanced equation to determine the moles of HF that will form:

5 mol F2 produces 6 mol HF
2.67 mol F2 produces x mol HF

x = (2.67 mol F2) x (6 mol HF / 5 mol F2) = 3.204 mol HF

Finally, we can convert moles of HF to grams:

3.204 mol HF x 20.01 g/mol = 64.11 g HF

Therefore, 64.11 grams of HF will form.
To determine the amount of HF formed in this reaction, we first need to identify the limiting reactant. We'll use the stoichiometric coefficients from the balanced equation:

5 F2 + 2 NH3 → N2F4 + 6 HF

Divide the moles of each reactant by their respective coefficients:

Fluorine: 2.67 moles / 5 = 0.534
Ammonia: 1.11 moles / 2 = 0.555

Since 0.534 is smaller than 0.555, fluorine is the limiting reactant. Now, we'll find the moles of HF formed using the stoichiometry of the balanced equation:

Moles of HF = (6 moles of HF / 5 moles of F2) x 2.67 moles of F2 = 3.204 moles of HF

Finally, we'll convert moles of HF to grams using its molar mass (20.01 g/mol):

Mass of HF = 3.204 moles of HF x 20.01 g/mol = 64.12 g

So, 64.12 grams of HF will form in this reaction.

Visit here to learn more about mole ratio brainly.com/question/14425689

#SPJ11

Ethanol and 1-hexanol are both polar compounds due to the presence of hydroxyl groups.

They exhibit partial positive and negative charges on their atoms, allowing them to form hydrogen bonds with other polar molecules. However, 1-hexanol has a longer hydrocarbon chain than ethanol, which makes it less polar and less soluble in water.

As a result, ethanol and 1-hexanol are not miscible in each other. The difference in their polarities makes it difficult for them to form hydrogen bonds with each other. Therefore, they will tend to separate from each other in a mixture.

To know more about hydrogen bonds click on below link:

https://brainly.com/question/10904296#

#SPJ11

Answer:

Only boiling water is needed to cook your couscous, but the important bit is the couscous to water ratio, you should abide by the 1:1 rule. So, for 60g of couscous, you will need 60ml of boiling water.

It is cooked

The polynomial that represents the surface area of 10 congruent prisms is 20b^2 + 40bh.

The polynomial that represents the surface area of 10 congruent prisms with base length "b" and height "h" can be obtained by multiplying 2b^2 + 4bh by 10:

10(2b^2 + 4bh)

To find the surface area of 10 prisms with a base length of 4 inches and a height of 5 inches, we can substitute "b" with 4 and "h" with 5 in the polynomial 20b^2 + 40bh:

Surface area = 20(4^2) + 40(4)(5)

Surface area = 20(16) + 40(20)

Surface area = 320 + 800

Surface area = 1120 square inches

So, the surface area of 10 prisms with a base length of 4 inches and a height of 5 inches is 1120 square inches.

Learn more about polynomial here

https://brainly.com/question/8303269

#SPJ11

The process through which a liquid turns into a gas or vapor at a specific temperature and pressure is known as the rate of evaporation.

VARIOUS FACTORS ARE;

1)Temperature: The particles move more quickly and collide more frequently at higher temperatures because their kinetic energy is higher. As a result, temperature causes an increase in the rate of evaporation. For instance, water vaporizes more quickly at higher temperatures than it does at lower ones

2)Surface area: The rate of evaporation increases as the surface area of the liquid increases. This is because more particles are exposed to the air and can escape from the liquid. For example, a puddle of water will evaporate more quickly if it is spread out over a larger surface area than if it is confined to a small container.

3)Liquid kind: The type of liquid affects how quickly it evaporates. More easily than liquids with stronger intermolecular interactions, weaker intermolecular force liquids evaporate. For instance, ethanol has fewer intermolecular interactions than water, which causes it to evaporate more quickly.

In conclusion, the composition of the liquid, surface area, humidity, and temperature all have an impact on the rate of evaporation.

To learn more about evaporation

https://brainly.in/question/1254156

When these two aqueous solutions are combined, a yellow precipitate of calcium chromate forms.

When aqueous solutions of calcium iodide and chromium(ii) sulfate are combined, a chemical reaction takes place. Calcium iodide is a soluble ionic compound and dissociates into its respective ions,[tex]Ca^{2+[/tex] and I-. Similarly, chromium(ii) sulfate also dissociates into its respective ions, [tex]Cr^{2+[/tex] and [tex]SO_4^{2-[/tex]. When these ions combine, they form the insoluble compound calcium chromate ([tex]CaCrO_4[/tex]), which appears as a yellow precipitate. The balanced chemical equation for this reaction is:
[tex]CaI_2[/tex](aq) + [tex]CrSO_4[/tex](aq) → [tex]CaCrO_4[/tex](s) + [tex]2I^-[/tex](aq) + [tex]SO_4^{2-[/tex](aq)
Therefore, when these two aqueous solutions are combined, a yellow precipitate of calcium chromate forms.

Learn more about calcium iodide :

https://brainly.com/question/29694775

#SPJ11

Serial and single well titrations are both equally effective and substantially more efficient. Unfortunately, unlike with serial titrations, there is no way to compare the results visually.

On the colour wheel, complementary hues are in opposition to one another. For instance, if red is absorbed and all other colours are reflected, we might see green, which is red's complementary colour. The fact that the average human eye can distinguish up to 4000 colours of red but only roughly 400 shades of blue is interesting to notice.

This has to do with the anatomy of the eye and how it was created to perceive the visible spectrum of colours.

To know more about titrations visit:-

https://brainly.com/question/31271061

#SPJ1

The percent by mass of calcium carbonate in the sample is 73.02%.

Assuming that the reaction goes to completion and only calcium carbonate reacts with hydrochloric acid, follow these steps:

1. Convert the given volume and pressure of CO2 to moles using the Ideal Gas Law (PV=nRT). Use the temperature in Kelvin (20°C + 273 = 293 K) and pressure in atm (792 mmHg / 760 = 1.042 atm). R = 0.0821 L*atm/(mol*K).

2. Calculate the moles of CO2: (1.042 atm)(0.656 L) / (0.0821 L*atm/mol*K)(293 K) = 0.0279 moles.

3. The stoichiometry of the reaction is 1:1, so there are 0.0279 moles of CaCO3.

4. Convert moles of CaCO3 to grams using its molar mass (100.09 g/mol): (0.0279 mol)(100.09 g/mol) = 2.793 g.

5. Calculate the percent by mass: (2.793 g CaCO3 / 3.00 g sample) * 100% = 73.02%.

To know more about Ideal Gas Law click on below link:

https://brainly.com/question/28257995#

#SPJ11

When pressure is maintained constant, the volume of a particular mass of gas varies in person with the true temperature of the gas.  The volume of a specific quantity of a gas is inversely related to its pressure at constant temperature.

Each thing in three dimensions takes up some space. The volume of this area is what is being measured. The space filled within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity.

When pressure is maintained constant, the volume of a particular mass of gas varies in person with the true temperature of the gas.  The volume of a specific quantity of a gas is inversely related to its pressure at constant temperature.

To know more about volume, here:

https://brainly.com/question/1578538

#SPJ1

As the pressure drops, the volume of the gas expands, increasing the number of potential molecule configurations in the system and raising the entropy. As a result, the system's entropy rises. One is true: Entropy rises.

There are more conceivable configurations of the molecules in the system as the temperature rises because the molecules' kinetic energy rises. As a result, the system's entropy rises.

Entropy increases.

The number of alternative configurations of the atoms in the system diminishes as the temperature drops because the kinetic energy of the particles in the system also drops. As a result, the system's entropy goes down.

The answer is that entropy falls.

to know more about entropy here:

brainly.com/question/13135498

#SPJ1

(a) The initial pH is 4.19.

(b) A volume of 20 mL of sodium hydroxide is required to reach the equivalence point.

(c) The pH at the equivalence point is 4.18.

(d) The pH after adding 8.00 mL of sodium hydroxide is 1.85.

(a) The initial pH can be calculated using the dissociation constant of benzoic acid, Ka, which is 6.5 × 10⁻⁵. Using the expression for Ka, pH = pKa + log ([A⁻]/[HA]), where A⁻ is the conjugate base and HA is the acid, we get:

pH = pKa + log ([A⁻]/[HA])

= pKa + log (0/0.1)

= pKa = -log(Ka)

= 4.19

(b) The equivalence point is reached when the moles of sodium hydroxide added equal the moles of benzoic acid initially present in the flask. The number of moles of benzoic acid is:

moles of C₆H₅OOOH = (0.1 mol/L) x (0.05 L)

= 0.005 mol

The volume of sodium hydroxide required can be calculated using the equation:

moles of NaOH = moles of C₆H₅OOOH

VNaOH x MNaOH = 0.005 mol

VNaOH = 0.02 L = 20 mL

(c) At the equivalence point, all of the benzoic acid has reacted with sodium hydroxide to form sodium benzoate, which is the conjugate base of benzoic acid. The pH at the equivalence point can be calculated using the dissociation constant of sodium benzoate, Kb, which is the conjugate base constant of benzoic acid, and the concentration of the resulting sodium benzoate solution, which is 0.05 L.

Kb = Kw/Ka = 1.0 x 10⁻¹⁴/6.5 x 10⁻⁵ = 1.5 x 10⁻¹⁰

pOH = pKb + log ([B]/[BOH])

= pKb + log (0.005/0)

= pKb = -log(Kb)

= 9.82

pH = 14 - pOH

= 14 - 9.82

= 4.18

(d) After adding 8.00 mL of 0.250 M sodium hydroxide solution, the moles of sodium hydroxide added is:

moles of NaOH = (0.25 mol/L) x (0.008 L)

= 0.002 mol

The moles of benzoic acid that have reacted is:

moles of C₆H₅OOOH reacted = 0.002 mol

The moles of benzoic acid remaining is:

moles of C₆H₅OOOH remaining = 0.005 mol - 0.002 mol

= 0.003 mol

The concentration of benzoic acid remaining is:

[H+] = [C₆H₅OOOH] = 0.003 mol/0.042 L

= 0.071 M

The pH can be calculated using the expression:

pH = -log[H+]

= -log(0.071)

= 1.85

To know more about conjugate base click on below link:

https://brainly.com/question/30086613#

#SPJ11

The oxidation states are represented as positive numbers, so we will take the absolute value: Average oxidation state of Sn = 2.00

To determine the average oxidation state of tin in abhurite, we first need to assign oxidation states to each of the tin atoms in the formula.

We know that the overall charge of the formula must be neutral, so we can use this information to set up an equation:

21x + 16(-1) + 14(-1) + 6(-2) = 0

where x is the oxidation state of tin.

Simplifying the equation:

21x - 16 - 14 - 12 = 0

21x = 42

x = 2

So the oxidation state of tin in abhurite is +2.

Therefore, the answer is +2.00.

To determine the average oxidation state of tin (Sn) in the mineral abhurite (Sn21Cl16(OH)14O6), we will first find the total charge contributed by all other atoms in the formula, and then divide that by the number of tin atoms.

Total charge of Cl atoms: 16 Cl atoms × (-1 charge/atom) = -16
Total charge of O atoms: 6 O atoms × (-2 charge/atom) = -12
Total charge of OH groups: 14 OH groups × (-1 charge/group) = -14

Sum of all charges: -16 + (-12) + (-14) = -42

Now, we'll divide the total charge by the number of tin atoms:
Average oxidation state of Sn = Total charge / Number of Sn atoms
= -42 / 21
= -2

However, oxidation states are represented as positive numbers, so we will take the absolute value:
Average oxidation state of Sn = 2.00

Therefore, the correct answer is +2.00.

Visit here to learn more about  oxidation : https://brainly.com/question/13182308
#SPJ11

To determine whether a precipitate will form, we need to calculate the ion product, Q, and compare it to the solubility product, Ksp.

For CaF2, Ksp = 4 x 10^-11. This means that at equilibrium, the product of the concentrations of Ca2+ and F- ions in solution cannot exceed this value, or else a precipitate will form.

In the given solution, the concentrations of Ca2+ and F- ions are 1.0 x 10^-4 M and 4.0 x 10^-4 M, respectively. Therefore, the ion product, Q, is:

Q = [Ca2+][F-]^2
 = (1.0 x 10^-4)(4.0 x 10^-4)^2
 = 6.4 x 10^-14

Comparing Q to Ksp, we see that Q < Ksp. This means that the ion product is less than the solubility product, and a precipitate will not form. Therefore, option 5 is the correct answer.
To determine whether a precipitate will form, we need to compare the reaction quotient (Q) with the solubility product constant (Ksp). In this case, the Ksp of CaF2 at 25°C is 4 x 10^-11.

First, we need to calculate Q for the given solution:

Q = [Ca2+][F-]^2

The concentration of Ca2+ is 1.0 x 10^-4 M from Ca(NO3)2, and the concentration of F- is 4.0 x 10^-4 M from NaF. Plug these values into the equation:

Q = (1.0 x 10^-4)(4.0 x 10^-4)^2 = 1.6 x 10^-11

Now, we can compare Q to Ksp:

Q = 1.6 x 10^-11
Ksp = 4 x 10^-11

Since Q < Ksp, a precipitate will not form in this solution. Therefore, the correct answer is option 5: Q < Ksp and a precipitate will not form.

Visit here to learn more about precipitate brainly.com/question/30904755

#SPJ11

The solubility of Pb(IO3)2 in 0.10 M KIO3(aq) is [tex]1.38 x 10^-9 g/L.[/tex]

The solubility of Pb(IO3)2 can be calculated using the common ion effect. When KIO3 is added to the solution, it dissociates to release IO3- ions, which are also present in the Pb(IO3)2 solubility equilibrium. The additional IO3- ions reduce the solubility of Pb(IO3)2, according to Le Chatelier's principle.

First, we need to calculate the concentration of IO3- ions from 0.10 M KIO3:

[IO3-] = 0.10 M

Next, we can use the solubility product expression for Pb(IO3)2:

[tex]Ksp = [Pb2+][IO3-]^2[/tex]

Since we know [IO3-], we can solve for [Pb2+]:

[tex][Pb2+] = sqrt(Ksp/[IO3-]^2) = sqrt(3.70 x 10^-13 / (0.10)^2) = 1.23 x 10^-10 M[/tex]

Finally, we can convert this to solubility using the molar mass of Pb(IO3)2 (561.21 g/mol):

Solubility =[tex][Pb2+] x molar mass of Pb(IO3)2 = 1.23 x 10^-10 M x 561.21 g/mol = 1.38 x 10^-9 g/L[/tex]

learn more about Ksp here:

https://brainly.com/question/31384470

#SPJ11

SO2 are required to convert 6.8 g of H2S according to the given reaction  0.0997 moles .

We first need to calculate the number of moles of H2S present in 6.8 g of H2S. We can do this by dividing the mass of H2S by its molar mass:

Molar mass of H2S = 2(1.008) + 32.06 = 34.076 g/mol
Number of moles of H2S = mass of H2S / molar mass of H2S
= 6.8 g / 34.076 g/mol
= 0.1994 mol

According to the balanced chemical equation, 2 moles of H2S react with 1 mole of SO2 to produce 3 moles of S and 2 moles of H2O. Therefore, we can set up a proportion to calculate the number of moles of SO2 required to convert 0.1994 mol of H2S:

2 mol H2S : 1 mol SO2 = 0.1994 mol H2S : x mol SO2

x mol SO2 = (1 mol SO2 * 0.1994 mol H2S) / 2 mol H2S
= 0.0997 mol SO2

Therefore, 0.0997 moles of SO2 are required to convert 6.8 g of H2S.

To determine the number of moles of SO2 required to convert 6.8 g of H2S, first find the moles of H2S, and then use the stoichiometry of the balanced reaction.

1. Find the moles of H2S:
Moles = (mass) / (molar mass)
Molar mass of H2S = 2(1.008 g/mol) + 32.06 g/mol = 34.076 g/mol
Moles of H2S = 6.8 g / 34.076 g/mol = 0.1995 mol

2. Use the stoichiometry of the reaction:
2 moles H2S : 1 mole SO2
0.1995 moles H2S : x moles SO2
x = (0.1995 mol H2S) * (1 mol SO2 / 2 mol H2S) = 0.09975 mol SO2

So, 0.09975 moles of SO2 are required to convert 6.8 g of H2S according to the given reaction.

Learn more about reaction here:

https://brainly.com/question/31257177

#SPJ11

When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B.

The reaction of tert-butyl chloride ((CH3)3CCl) with water in an inert solvent produces tert-butyl alcohol ((CH3)3COH). When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The rate increases by a factor of 2.

The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B: the rate decreases by a factor of 2. This is because increasing the concentration of water would increase the number of water molecules available for the reaction, but the reaction rate is limited by the concentration of tert-butyl chloride. Thus, doubling the concentration of water would lead to a decrease in the rate of the reaction by a factor of 2.

Learn more about the reaction here: brainly.com/question/28984750

#SPJ11

When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B.

The reaction of tert-butyl chloride ((CH3)3CCl) with water in an inert solvent produces tert-butyl alcohol ((CH3)3COH). When you double the concentration of water, the rate of the reaction will increase by a factor of 2. So, the correct answer is c. The rate increases by a factor of 2.

The effect of doubling the concentration of water on the rate of the reaction between tert-butyl chloride and water in an inert solvent would be option B: the rate decreases by a factor of 2. This is because increasing the concentration of water would increase the number of water molecules available for the reaction, but the reaction rate is limited by the concentration of tert-butyl chloride. Thus, doubling the concentration of water would lead to a decrease in the rate of the reaction by a factor of 2.

Learn more about the reaction here: brainly.com/question/28984750

#SPJ11

The appropriate reagent to use in this step of the synthesis of Diazepam (Valium) from benzoyl chloride and 4-chloro-N-methylaniline would be option c. CH₂CH=CHCOCI.

This is because the reagent CH₂CH=CHCOCI is an acyl chloride, which can be used to introduce an acyl group (RCO-) into the molecule. In the synthesis of Diazepam, the acyl chloride is used to react with 4-chloro-N-methylaniline, which contains an amino group (NH2), to form an amide linkage (CONH-) between the benzoyl chloride and 4-chloro-N-methylaniline. This step is essential for the formation of the Diazepam molecule.

The reaction between the acyl chloride and the amine is typically carried out using a base such as triethylamine (Et3N) or pyridine (C5H5N) as a catalyst, which helps to facilitate the reaction. The resulting amide linkage is a key functional group in the structure of Diazepam, and subsequent steps in the synthesis can then be carried out to complete the formation of the Diazepam molecule.

It's important to note that the synthesis of Diazepam is a complex process that requires careful attention to reaction conditions, reagent selection, and purification techniques to obtain a pure and high-yield product. Chemical reactions involving acyl chlorides can be hazardous, and proper safety precautions should always be followed when conducting organic syntheses.

You can learn more about Diazepam at: brainly.com/question/30391991

#SPJ11

The nitrate ion exists in one configuration that is an average of the three structures shown.(D)

The nitrate ion, NO3, is best described by resonance, which means that the actual structure is an average of the three Lewis structures. In reality, the nitrogen-to-oxygen bonds are equivalent and intermediate between single and double bonds.

The electrons are delocalized, meaning they are spread across all three oxygen atoms. This results in a more stable structure, and the overall charge of the ion is minus 1.(D)

To know more about resonance click on below link:

https://brainly.com/question/28318319#

#SPJ11

The molarity of the aqueous solution containing 129 g of glucose in 200 mL of solution is 3.58 M, which is option (3) in the given choices.

To calculate the molarity (M) of the solution, we need to first calculate the number of moles of glucose present in the solution.

As the molar mass of glucose = (6 x 12.01 g/mol) + (12 x 1.01 g/mol) + (6 x 16.00 g/mol) = 180.18 g/mol

Number of moles of glucose = Mass of glucose / Molar mass of glucose

                                                = 129 g / 180.18 g/mol

                                                = 0.716 mol

Now, we need to calculate the volume of the solution in liters.

Volume of solution = 200 mL / 1000 mL/L

                                = 0.2 L

Finally, we can calculate the molarity of the solution using the formula:

Molarity (M) = Number of moles of solute / Volume of solution in liters
                   = 0.716 mol / 0.2 L

                   = 3.58 M

Therefore, the molarity of the aqueous solution is option (3).

To know more about equilibrium constant, click below.

https://brainly.com/question/8732513

#SPJ11

The rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes is approximately [tex]0.00105 min^(-1).[/tex]

To find the rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes, you can use the following formula:
rate constant (k) = ln(2) / half-life

Step 1: Plug in the given half-life value.
k = ln(2) / 660 minutes

Step 2: Calculate the rate constant.
[tex]k ≈ 0.00105 min^(-1)[/tex]
So, the rate constant for the first-order decomposition of H2O2 with a half-life of 660 minutes is approximately 0.00105 min^(-1).

To know more about first-order decomposition :

https://brainly.com/question/4288256

#SPJ11

The correct answer is: I and II are constitutional isomers, but not enantiomers, identical, or diastereomers.

If I and II are constitutional isomers, it means that they have the same molecular formula but different connectivity or arrangement of atoms.
If they are enantiomers, it means that they are non-superimposable mirror images of each other. Enantiomers have the same connectivity but differ in their spatial arrangement of atoms.
If they are identical, it means that they are exactly the same molecule in every way, including connectivity and spatial arrangement.
If they are diastereomers, it means that they are stereoisomers that are not mirror images of each other. Diastereomers have different connectivity and different spatial arrangements of atoms.
If I and II are not isomeric, it means that they are not related to each other by any type of isomerism.
So, based on the given options, if I and II are constitutional isomers, they cannot be identical, enantiomers or diastereomers. If they are not isomeric, it means that they are also not enantiomers or diastereomers.

learn more about diastereomers Refer: https://brainly.com/question/21506956

#SPJ11

We would need more information about the acid-base equilibrium to determine the pH at equilibrium.

Without additional information about the chemical equilibrium involved, it is not possible to determine the pH at equilibrium.

The pH of a solution depends on the concentration of hydrogen ions (H+) present in the solution, which in turn depends on the dissociation constant (Ka) of the acid present and the concentration of the acid and its conjugate base.

Therefore, we would need more information about the acid-base equilibrium to determine the pH at equilibrium.

Learn more about equilibrium ,

https://brainly.com/question/30807709

#SPJ4

If reaction occurs in the basic solution. The Balance chemical equation by adding only OH− or H2O would be : Zn(s) + 4OH-(aq) + NO3-(aq) → NH3(aq) + Zn(OH)4 2-(aq), and The coefficients are: 1, 4, 1, 1, 1.

To balance the given reaction in basic solution, we'll add OH⁻ and/or H₂O as needed. Here's the balanced equation:

Zn(s) + 2NO₃⁻(aq) + 10OH⁻(aq) → 6NH₃(aq) + Zn(OH)₄²⁻(aq) + 2H₂O(l)

Now, let's find the sum of the coefficients:
1 (for Zn) + 2 (for NO₃⁻) + 10 (for OH⁻) + 6 (for NH₃) + 1 (for Zn(OH)₄²⁻) + 2 (for H₂O) = 22.

We know that a reaction has to do with the combination of two or more chemical species. On thing that we must know is that the combination of the species would lead to the production of a new substance. This is what we can also be able to call a chemical change.

Visit here to learn more about reaction  : https://brainly.com/question/29988806
#SPJ11

Hybridization is the process of combining standard atomic orbitals to form hybrid atomic orbitals. This process occurs when an atom in a molecule is bonded to other atoms and needs to form new hybrid orbitals to accommodate the bonding. Hybridization helps to explain the geometry of molecules and the types of chemical bonds that are present.

During hybridization, the standard atomic orbitals are mathematically combined to form hybrid atomic orbitals. The number of standard atomic orbitals equals the number of hybrid atomic orbitals. The resulting hybrid orbitals have different shapes and orientations compared to the original atomic orbitals. Hybridization can occur in different ways depending on the number and types of orbitals involved. For example, in sp hybridization, one s orbital and one p orbital combine to form two hybrid sp orbitals. These hybrid orbitals have a linear shape and are oriented at an angle of 180 degrees from each other. This type of hybridization occurs in molecules such as acetylene (C2H2) where the carbon atoms are bonded to each other with a triple bond.

In sp2 hybridization, one s orbital and two p orbitals combine to form three hybrid sp2 orbitals. These hybrid orbitals have a trigonal planar shape and are oriented at an angle of 120 degrees from each other. This type of hybridization occurs in molecules such as ethene (C2H4) where the carbon atoms are bonded to each other with a double bond. In sp3 hybridization, one s orbital and three p orbitals combine to form four hybrid sp3 orbitals. These hybrid orbitals have a tetrahedral shape and are oriented at an angle of 109.5 degrees from each other. This type of hybridization occurs in molecules such as methane (CH4) where the carbon atom is bonded to four hydrogen atoms.

To know more about Atomic Orbitals visit:

https://brainly.com/question/29561958

#SPJ11

Answer :

Step-by-step explanation :

Molarity: It is defined as number of moles of solute dissolved per litre of solution.

Molarity is represented by 'M'

Required Formula :

[tex] { \boxed{\sf M = \dfrac{Number \: of \: moles \: of \: solute}{Volume \: of \: {sol}^{n} (ml) } \times 1000}}[/tex]

Here,

Number of moles = Given mass/molar mass

Substituting the values,

[tex]:\implies [/tex] No. of moles = 12.3/62

[tex]:\implies [/tex] 0.198 mol

Now,

[tex]:\implies [/tex] M = 0.198/564 × 1000

[tex]:\implies [/tex] M = 198/564

[tex]:\implies [/tex] M = 0.34 M

Therefore, Molarity of the solution is 0.34 M

Answer :

Step-by-step explanation :

Molarity: It is defined as number of moles of solute dissolved per litre of solution.

Molarity is represented by 'M'

Required Formula :

[tex] { \boxed{\sf M = \dfrac{Number \: of \: moles \: of \: solute}{Volume \: of \: {sol}^{n} (ml) } \times 1000}}[/tex]

Here,

Number of moles = Given mass/molar mass

Substituting the values,

[tex]:\implies [/tex] No. of moles = 12.3/62

[tex]:\implies [/tex] 0.198 mol

Now,

[tex]:\implies [/tex] M = 0.198/564 × 1000

[tex]:\implies [/tex] M = 198/564

[tex]:\implies [/tex] M = 0.34 M

Therefore, Molarity of the solution is 0.34 M