Five students took a quiz. The lowest score was 4, the highest score was 6, the average (mean) was 5.2, and the mode was 6. A possible set of scores for the students is:

The correct answer is D. The data are qualitative because they consist of counts or measurements.

Qualitative data refers to non-numerical information that is categorical or descriptive in nature. It describes qualities or characteristics of a subject.

In this case, the preferred hands of the experiment's participants would be categorical information, as it describes the quality or characteristic of which hand the participants prefer to use.

On the other hand, quantitative data refers to numerical information that can be measured or counted. It involves quantities or amounts.

Examples of quantitative data would include measurements such as height, weight, or number of participants.

Since the preferred hands in this scenario are categorical and not measured or counted, the data is qualitative. It focuses on the qualities or categories of left-handedness or right-handedness, rather than measuring or counting any specific quantities.

For more questions on quantitative data, click on:

https://brainly.com/question/822359

#SPJ8

a) Probability of drawing two cards summing to 21: 1/331

b) Probability of drawing two cards summing to 10: 28/1326

c) Probability of drawing a third card to make the sum strictly larger than 21: 2/25

a) To calculate the probability of drawing two cards that sum to 21, we need to determine the number of favorable outcomes and the total number of possible outcomes.

There are four ways to get a sum of 21 with two cards: drawing an Ace and a face card (4 possibilities).

The total number of possible outcomes is given by the combination of choosing two cards from a deck of 52 cards, which is C(52, 2) = 1326.

Therefore, the probability of drawing two cards that sum to 21 is 4/1326, which simplifies to 1/331 or approximately 0.0030.

b) To calculate the probability of drawing two cards that sum to 10, we need to determine the number of favorable outcomes.

There are several combinations that sum to 10: drawing a 4 and a 6, drawing a 5 and a 5, drawing a 6 and a 4, and drawing a face card and a 10.

The total number of possible outcomes remains the same, which is 1326.

Therefore, the probability of drawing two cards that sum to 10 is (4 + 4 + 4 + 16)/1326, which simplifies to 28/1326 or approximately 0.0211.

c) Given that you have already drawn the 10 of clubs and the 4 of hearts, the sum of these two cards is 10 + 4 = 14.

To find the probability that the sum of all three cards is strictly larger than 21, we need to consider the remaining cards in the deck. Since there are 50 cards left in the deck, we calculate the probability of drawing a card that makes the sum exceed 21.

The only way to exceed 21 is to draw an Ace, which is worth 11. There are four Aces in the deck.

Therefore, the probability of drawing a card that makes the sum strictly larger than 21 is 4/50, which simplifies to 2/25 or approximately 0.08.

Complete question:

Assume that in blackjack, an ace is always worth 11, all face cards (jack, queen, king) are worth 10, and all number cards are worth the number they show. given a shuffled deck of cards:

a) What is the probability that you draw two cards and they sum 21

b) What is the probability that you draw two cards and they sum 10

c) Suppose, you have drawn two cards: 10 of clubs and 4 of hearts. You now draw a third card from remaining 50. What is the probability that the sum of all three cards is strictly larger than 21?

To know more about Probability, refer here:

https://brainly.com/question/32117953

#SPJ4

Answer:

2/8 or 1/4

Step-by-step explanation:

Answer:

It's 16m

Step-by-step explanation:

Let's say the missing side is C, and since the triangle is right-angle triangle, you can use Pythagoras theorem. Which is

C squared is equal to A squared plus B squared

Like this: c^2 = a^2+b^2

Then

c^2= (10)^2 + (12)^2

c^2= 100 + 144

c^2= 244

c=

[tex] \sqrt{244} [/tex]

c = 15.6

Hope this helps :)

Answer:

900,000 6

∴ there are 900,000 6-digit numbers in all.

Answer:

70 ft squared

Step-by-step explanation:

Separate into rectangle and triangle then add the found areas together for total area.

rectangle...

10×4=40

triangle...

[tex] \frac{bh}{2} = [/tex]

(12×5)/2=

60/2=30

add area for rectangle and triangle...

40+30=70

Answer:

a

b

e

Step-by-step explanation:

remember length times width equals area

Answer:

The answer would be C

Step-by-step explanation:

This is because 3/4 times two is 6/4 simplified is 1 1/2

please give me brainiest i was working on it the whole time.

Answer: 4* 2 3/4* 8 1/2= 93 1/2

Late answer, but whatever.

Answer:

36. There are 36 students in the class.

Step-by-step explanation:

4/12 oatmeal

2/12 cinnamon

3/12 chocolate

9 peanut

The fractions added together = 9/12

This means the 9 students = 3/12 of the class

3 x 4 = 12

9 x 4 = 36

Answer:

10 miles per hour

Step-by-step explanation:

If you run a mile in 6 minutes...

10miles x 6minutes is 60 minutes. An hour.

You can run 10 miles in the hour at that rate. Does that make sense?

Answer:

-62.8 is the Answer fot the equation, Hope this helped

Answer:

10 stickers on one sheet

Step-by-step explanation:

96 - 16 ÷ 8 =

80 ÷ 8 = 10

have a nice day! :)

When we compute the deviation of the second observation in the data set from the mean, and find that the result is a negative number, this tells us that there is good reason to use the median as opposed to the mean as a measure of central tendency.

In computing deviations, it is important to note that extremely skewed deviations can increase the normal distributions and make it difficult to use the standard deviation as a measure of central tendency.

So, when the deviation of the second observation is a negative number, the distribution will be affected and it may become better to use the median as a measure of central tendency.

Learn more about deviations here:

https://brainly.com/question/24298037

#SPJ4

Complete Question:

We compute the deviation of the second observation in the data set from the mean, and find that the result is a positive number. This tells us that:

there is a positive overall skewness in the data set.

there is good reason to use the median as opposed to the mean as a measure of central tendency.

the first deviation must also be positive.

the second observation is greater than the sample average.

Answer:

b

Step-by-step explanation:

Answer:

[tex]\boxed {\boxed {\sf sin(\theta)=\frac {16}{20}}}[/tex]

Step-by-step explanation:

We are asked to find the sine for the angle indicated. Remember that sine is equal to the opposite over the hypotenuse.

Analyze the triangle given. We have the 2 legs (16 and 12), but we do not have the hypotenuse (the longest side). We must solve for it.

Since this is a right triangle, we can use the Pythagorean Theorem.

[tex]a^2+b^2=c^2[/tex]

Where a and b are the legs and c is the hypotenuse. We know 16 and 12 are the legs.

[tex](16)^2+(12)^2=c^2[/tex]

Solve the exponents.

[tex]256+144=c^2[/tex]

[tex]400=c^2[/tex]

Since we are solving for c, we must isolate the variable. It is being squared, so we take the inverse: a square root.

[tex]\sqrt{400}=\sqrt{c^2} \\20=c[/tex]

Now we know the hypotenuse is 20. The side opposite of the angle θ is 16.

[tex]sin (\theta)= \frac {opposite}{hypotenuse} \\sin (\theta)= \frac{16}{20}[/tex]

The sine of the angle is equal to 16/20. This can be reduced to 4/5 if necessary (by dividing the numerator and denominator by 4).

Answer:

minimum is 55

maximum is 71

Step-by-step explanation:

got this from another answer so i hope it helps you

Answer:

9

Step-by-step explanation:

let x be number of jeans

3/5 = x/15

x=(3/5)15

x=9

Answer:

9 jeans

Step-by-step explanation:

The 5 part of the ratio relates to 15 shirts , then

15 ÷ 5 = 3 ← value of 1 part of the ratio , then

3 parts = 3 × 3 = 9 ← number of jeans

If the activities and assessments were designed to facilitate learning and encourage higher-order thinking skills, learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

The teaching and learning process revolves around assessing the level of knowledge students have and guiding them to achieve specific goals.

The role of assessments in the classroom is to measure students' understanding of the taught content and to provide feedback to the teacher on areas where improvement is required.

Suppose the learning activity by Teacher Thato and all the three assessment of learning activities by the student teachers captures the entire learning experience of Teacher Thato's learners.

The extent to which Teacher Thato's learners were exposed to opportunities for achieving mathematical proficiency depends on the effectiveness of the teaching and learning process.

Mathematical proficiency is the knowledge and skills that learners gain through regular interactions with mathematical concepts.

Mathematical proficiency means understanding mathematics as well as being able to apply mathematical knowledge in real-world scenarios.

Therefore, if Teacher Thato's learning activities and assessment methods were designed to provide learners with opportunities to apply mathematical concepts to real-world problems, then they were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

Similarly, if the activities and assessments required learners to engage in critical thinking, problem-solving, and other higher-order thinking skills, then it's possible that learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

In summary, if the activities and assessments were designed to facilitate learning and encourage higher-order thinking skills, learners were exposed to opportunities for achieving mathematical proficiency (Kilpatrick, Swafford & Findell, 2001).

To know more about mathematical proficiency, visit:

https://brainly.com/question/32442803

#SPJ11

Answer:

- 14x - 9y = 6

Step-by-step explanation:

- 7x - y = 0 → (1)

7x + 8y = - 6 → (2)

Subtracting (2) from (1) term by term

- 7x - 7x - y - 8y = 0 - (- 6)

- 14x - 9y = 0 + 6

- 14x - 9y = 6

Mr. Blanco has the right to refuse treatment, even if it means he will die. The doctor should respect Mr. Blanco's decision and engage in open and honest communication with him to understand his concerns.

1. The ethical principles pertinent to this case include autonomy, beneficence, non-maleficence, and respect for patient's wishes. Autonomy refers to Mr. Blanco's right to make decisions about his own healthcare. Beneficence and non-maleficence require the healthcare professionals to act in Mr. Blanco's best interest and do no harm. Respect for patient's wishes entails honoring his decision and preferences.

2. Yes, Mr. Blanco should have the right to refuse treatment even if the consequence may be that he will die. It is his autonomy and right to make decisions about his own body and medical treatment. As long as he is mentally competent, he has the right to make choices about his healthcare, even if they go against medical advice.

3. It is important to consider the possibility that Mr. Blanco may be seriously depressed and not mentally competent to make the decision. In such cases, a thorough evaluation of his mental capacity and emotional state should be conducted by healthcare professionals to ensure that he is able to make an informed decision. If he is found to lack mental competence, appropriate steps should be taken to protect his best interests.

4. Given that Mr. Blanco had previously given his written consent for the surgery but verbally withdrew it later, the doctor should respect his current decision. A patient's consent can be withdrawn at any time, and healthcare professionals should prioritize the patient's current wishes. It is essential to engage in open and honest communication with Mr. Blanco to understand his concerns and explore alternative options if available.

5. The decision may be different if Mr. Blanco were refusing treatment for another condition such as terminal cancer or irreversible heart failure. In such cases, the prognosis and potential outcomes may be different, and the balance between preserving life and respecting autonomy may shift. Each case should be evaluated individually, considering the patient's medical condition, prognosis, quality of life, and their values and preferences. Open discussions with the patient, their family, and the healthcare team are crucial in reaching the most ethically appropriate decision.

To know more about the heart failure refer here :

https://brainly.com/question/30292347#

#SPJ11

Answer:

124

Step-by-step explanation:

To find the surface area, we add the area from all faces or the prism.

the first face, we can put 8 times 2.5, which is 20. There are two of these faces, so we have 40 in our area so far.

next the other face. 4  times 2.5 is 10, and there are two of these faces. 60 in out area.

now the top and bottom faces. 8 times 4 is 32. there are two of these faces, and 60 +64 = 124

Answer:

Omar

Step-by-step explanation:

Given

See attachment for prism

Required

Whose expression is correct

The base of the attached prism is a triangle that has the following dimension.

[tex]Base =7cm[/tex]

[tex]Height = 24cm[/tex]

So, the area is:

[tex]Area = \frac{1}{2} * Base * Height[/tex]

[tex]Area = \frac{1}{2} * 7 * 24[/tex]

Comparing the expressions of Omar and Kari, we can conclude that Omar is correct

Answer:

147/200

Step-by-step explanation:

i.  a sample size of 138 is needed to estimate the mean within +2 with 99% confidence. Sample size needed: 138

ii. Sample size needed: 342

iii. Sample size needed: 193

iv. Estimating process is legitimate due to the Central Limit Theorem.

What is normal distribution?

Normal distribution, also known as the Gaussian distribution or bell curve, is a continuous probability distribution that is symmetric and characterized by its mean and standard deviation.

i. To estimate the mean within +2 with 99% confidence, we can use the formula for the sample size needed for estimating the population mean:

[tex]n = (Z * \sigma / E)^2[/tex]

Where:

n = sample size

Z = Z-score corresponding to the desired confidence level (99% confidence corresponds to a Z-score of approximately 2.576)

σ = population standard deviation (given as √35 since [tex]o^2[/tex] = 35)

E = maximum error tolerance (+2 in this case)

Substituting the values into the formula:

[tex]n = (2.576 * \sqrt{35} / 2)^2 = 137.13[/tex] (approx)

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 138 is needed to estimate the mean within +2 with 99% confidence.

ii. To estimate the true proportion within 22% with 99% confidence, we can use the formula for the sample size needed for estimating the population proportion:

[tex]n = (Z^2 * p * (1 - p)) / E^2[/tex]

Where:

n = sample size

Z = Z-score corresponding to the desired confidence level (99% confidence corresponds to a Z-score of approximately 2.576)

p = estimated proportion (0.5 is commonly used for unknown proportions)

E = maximum error tolerance (22% in this case, which is 0.22)

Substituting the values into the formula:

[tex]n = (2.576^2 * 0.5 * (1 - 0.5)) / 0.22^2 = 341.28[/tex]

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 342 is needed to estimate the true proportion within 22% with 99% confidence.

iii. When the population variance [tex]o^2[/tex] is unknown, we can use the t-distribution instead of the Z-distribution for estimating the mean. The formula for the sample size needed for estimating the population mean with an unknown variance is:

[tex]n = (t * \sigma / E)^2[/tex]

Where:

n = sample size

t = t-score corresponding to the desired confidence level and degrees of freedom (in this case, for 95% confidence and a large sample size, t can be approximated as 1.96)

σ = estimated standard deviation (given as √50 since [tex]o^2[/tex] = 50)

E = maximum error tolerance (+1 in this case)

Substituting the values into the formula:

[tex]n = (1.96 * √50 / 1)^2 = 192.08[/tex]

Since the sample size needs to be a whole number, we round up to the nearest integer. Therefore, a sample size of 193 is needed to estimate the mean within +1 with 95% confidence using the 22.5% value.

iv. The estimating process is still legitimate in this case because the sample size is large and the Central Limit Theorem applies. The Central Limit Theorem states that for a large enough sample size, the sampling distribution of the mean (or proportion) will be approximately normally distributed, regardless of the shape of the population distribution. This allows us to make inferences about the population mean or proportion using sample statistics. Additionally, the use of the t-distribution accounts for the uncertainty introduced by using the sample standard deviation instead of the population standard deviation.

To know more about Central Limit Theorem, refer here:

https://brainly.com/question/898534

#SPJ4

Answer:

8

Step-by-step explanation:

The expected number of boats of the next 12 boats to dock is from Connecticut is 6.

Probability is simply the possibility of getting an event. Or in other words, we are predicting the chance of getting an event.

The value of probability will be always in the range from 0 to 1.

Given that,

Boats from all along the Atlantic coast dock at a busy marina.

Of the first 10 boats to dock at the marina one day, 5 were from Connecticut.

Probability that the boats which dock are from Connecticut = 5/10 = 1/2

When the next 12 boats also arrive,

Expected number of boats from Connecticut = 1/2 × 12 = 6

Out of 12, 6 boats are from Connecticut.

Hence the expected number of boats is 6.

Learn more about Probability here :

https://brainly.com/question/18163285

#SPJ2

Answer: 48 grams

Step-by-step explanation:

The half-life of an element refers to the amount of time that it takes for half of it to decay.

For instance, if the half life is 2 hours and the element weighs 12 g, the element will only weigh 6g after 2 hours.

The half-life of the above is 6 hours, in 3 hours therefore, it would only have lost of the half that it would have lost in 3 hours which means it would have lost only a quarter.

= 64 * ( 1 - 1/4)

= 48 grams

The required solutions are:

[tex]g(a + h) = -(a + h)^2 + B(a + h)[/tex]

[tex]g(-a) = -(-a)^2 + B(-a)[/tex]

[tex]g(\sqrt{(a)}) = -(\sqrt{(a)})^2 + B(\sqrt{(a)})[/tex]

[tex]a + g(a) = a + (-a^2 + Ba)\\[/tex]

[tex]1/g(a) = 1/(-a^2 + Ba)[/tex]

To find the value of k, we can substitute the coordinates of the point P(6, -7) into the equation of the line and solve for k.

Given: P(6, -7) and the line equation 6x + ky = -20

Substituting the x and y values of P into the equation, we have:

6(6) + k(-7) = -20

36 - 7k = -20

Now, let's solve for k:

-7k = -20 - 36

-7k = -56

k = (-56)/(-7)

k = 8

Therefore, the value of k is 8.

To solve the second part of your question, let's work with the function [tex]g(x) = -x^2 + Bx.[/tex]

1. g(a + h):

Substitute (a + h) into the function:

[tex]g(a + h) = -(a + h)^2 + B(a + h)[/tex]

Simplify the expression as needed.

2. g(-a):

Substitute (-a) into the function:

[tex]g(-a) = -(-a)^2 + B(-a)[/tex]

Simplify the expression as needed.

3. [tex]g(\sqrt{(a)})[/tex]:

Substitute [tex]\sqrt{(a)}[/tex] into the function:

[tex]g(\sqrt{(a)}) = -(\sqrt{(a)})^2 + B(\sqrt{(a)})[/tex]

Simplify the expression as needed.

4. a + g(a):

Substitute 'a' into the function and add it to a:

[tex]a + g(a) = a + (-a^2 + Ba)[/tex]

Simplify the expression as needed.

5. 1/g(a):

Take the reciprocal of g(a):

[tex]1/g(a) = 1/(-a^2 + Ba)[/tex]

Simplify the expression as needed.

Please note that without the specific value of B or the variable a, we can only provide general expressions for each of the given calculations.

Learn more about equations at:

https://brainly.com/question/28871326

#SPJ4

The minimum value of the product xyxy is -9, obtained when y equals -3.

To find the minimum value of the product xyxy, we need to first determine the minimum value of the expression y = 4x² - 3.

The given expression is a quadratic equation in the form of y = ax² + bx + c, where a = 4, b = 0, and c = -3.

To find the minimum value, we need to determine the x-coordinate of the vertex of the parabola, which corresponds to the minimum point.

The x-coordinate of the vertex can be found using the formula: x = -b / (2a).

In this case, b = 0 and a = 4, so the x-coordinate of the vertex is x = -0 / (2 × 4) = 0.

Substituting the x-coordinate back into the equation y = 4x² - 3, we can find the minimum value of y.

y = 4(0)² - 3 = -3.

Therefore, the minimum value of y is -3.

To find the minimum value of the product xyxy, we can substitute the minimum value of y (-3) back into the expression:

xyxy = x × (-3) × x × (-3) = -9x².

Since the coefficient is negative, the minimum value of the product xyxy is -9.

Hence, the minimum value of the product xyxy is -9.

Learn more about the minimum value of the product at

https://brainly.com/question/29461549

#SPJ4