The solubility of CuI in a 0.32 M KCN solution is 1.03 M.
To find the solubility, first determine the reaction quotient (Q) for CuI dissolving in KCN:
CuI(s) + 2 KCN(aq) -> Cu(CN)2⁻(aq) + 2 K⁺(aq) + I⁻(aq)
Ksp(CuI) = [Cu⁺][I⁻] = 1.1 x 10⁻¹²
Kf(Cu(CN)2⁻) = [Cu(CN)2⁻]/([Cu⁺][CN⁻]^2) = 1 x 10²⁴
Now, set up the equilibrium equation with the given concentrations:
Q = [Cu(CN)2⁻]/([Cu⁺][0.32]²)
Since Q > Ksp, the reaction shifts right, and CuI dissolves. Substitute the Kf expression into the Q equation and solve for [Cu⁺]:
[Cu⁺] = (1 x 10²⁴)/[CN⁻]² = (1 x 10²⁴)/(0.32)²= 1.03 M
Thus, the solubility of CuI in a 0.32 M KCN solution is 1.03 M.
To know more about reaction quotient click on below link:
https://brainly.com/question/30200804#
#SPJ11
Two tins with tight- fitting lids, one painted black and the other white, are taken. Holes are made in the lids to hold thermometers. Equal quantity of boiling water is poured into each tin. The temperatures at various times are noted.
Problem:
Hypothesis:
The possible problem and hypothesis would be:
Problem : Does the color of the tin affect the rate of cooling of boiling water inside?Hypothesis : The black tin will absorb more heat from the boiling water than the white tin, causing its temperature to rise faster and reach a higher final temperature."How to find the problem and hypothesis ?To find the problem and hypothesis, you should first identify the purpose or objective of the experiment or study. The problem is the question or issue that the experiment or study aims to address or solve. The hypothesis is a tentative explanation or prediction for the problem or question.
In the given scenario, the purpose of the experiment is to compare the temperatures inside tins painted black and white when filled with equal quantities of boiling water.
Find out more on hypothesis at https://brainly.com/question/13075121
#SPJ1
A protein with a molecular weight of M prot 32,000 and the specific volume of the protein is Vprot = 0.75 ml/g. What is the translational diffusion coefficient consistent with the Stokes radius obtained from the previous question?
The translational diffusion coefficient (D) of a protein with a molecular weight (M_prot) of 32,000 and specific volume (V_prot) of 0.75 ml/g is 1.73 x 10⁻⁷ cm²/s, consistent with the Stokes radius calculated previously.
1. Calculate the protein's volume (V) using M_prot and V_prot: V = M_prot x V_prot = 32,000 x 0.75 ml/g = 24,000 ml.
2. Convert V to cm³: V = 24,000 ml x (1 cm³/1 ml) = 24,000 cm³.
3. Calculate the protein's radius (r) using the formula for the volume of a sphere: V = 4/3πr³. Solve for r: r ≈ 17.8 Å.
4. Calculate the viscosity (η) of the solvent (water) at 20°C: η ≈ 1.002 x 10⁻² g/cm•s.
5. Calculate the Boltzmann constant (k_B) at room temperature: k_B = 1.38 x 10⁻²³ J/K.
6. Convert the temperature (T) to Kelvin: T = 20°C + 273.15 = 293.15 K.
7. Calculate the translational diffusion coefficient (D) using the Stokes-Einstein equation: D = k_BT / 6πηr. Plug in the values: D ≈ 1.73 x 10⁻⁷ cm²/s.
To know more about Boltzmann constant click on below link:
https://brainly.com/question/30639301#
#SPJ11
Figure 2 shows the apparatus a student used to determine the melting point and the boiling point of substance B in Figure 1.
Explain why the student could not use this apparatus to determine the boiling point of substance B.
Student could use Thiele apparatus to determine the boiling point of substance B.
Boiling pointThe temperature when a substance's solid and liquid phases are equal in strength is known as the melting point of that substance. When a substance's vapour pressure reaches parity with outside pressure, that point is known as its boiling point.On the external arm of the U-tube 2, a manometer 6 gauges the pressure being applied. All air must be drawn out of the sample side of the U-tube before the liquid can begin to boil vigorously again.A piece of lab glassware created to confine and heat an oil bath is called a Thiele tube after the German scientist Johannes Thiele. To ascertain a substance's melting point, a setup like this is frequently employed. The device has an attached handle and looks like a glass test tube.
For more information on boiling point measurement kindly visit to
https://brainly.com/question/29695731
#SPJ1
12 write the brønsted acid equation for ch3cooh(aq).
The Brønsted acid equation for CH3COOH(aq) can be written as follows: CH3COOH(aq) + H2O(l) ⇌ CH3COO-(aq) + H3O+(aq)
In this equation, CH3COOH(aq) is the acid and H2O(l) is the base. When the acid donates a proton to the base, it forms the conjugate base CH3COO-(aq) and the conjugate acid H3O+(aq). The reaction can also proceed in the reverse direction, with the conjugate base acting as an acid and the conjugate acid acting as a base.
It is important to note that the strength of an acid is determined by its ability to donate a proton, or H+. Acids that readily donate a proton are considered strong acids, while acids that donate a proton less readily are considered weak acids. In the case of CH3COOH(aq), it is a weak acid as it only partially dissociates in water, meaning that only a small percentage of the molecules donate a proton. The Brønsted acid equation for CH3COOH(aq) can be written as follows: CH3COOH(aq) + H2O(l) ⇌ CH3COO-(aq) + H3O+(aq).
Learn more about strong acids at:
https://brainly.com/question/12811944
#SPJ11
Side chain oxidations of alkylbenzenes with Na2Cr2O7 and H2SO4/H2O will not work if the alkyl side chain has:
A. only 1 carbon
B. 4 or more carbons
C. benzylic hydrogens
D. no benzylic hydrogens
The right response is D. There are no benzylic hydrogens.
What function does butylbenzene serve?Uses. used as a solvent and to manufacture polymers. Organic synthesis, the production of pesticides, plasticizers, surface-active agents, polymer linking agents, asphalt constituents, and naphtha constituents.
What is the name of a benzene ring that is joined to a carbon chain?Hydrocarbons with aromatic rings contain benzene or a ring structure similar to it. They are sometimes referred to as aromatic compounds or arenes. Benzene is frequently represented as a six-carbon ring with alternating double and single bonds. There are a few issues with this straightforward image, though.
To know more about benzylic hydrogens visit:-
https://brainly.com/question/31420529
#SPJ1
a slightly polar organic compound distributes between diethyl ether and water with a partition coefficient equal to 3 (in favor of the ether). what simple method can be used to increase the partition coefficient? explain.
One simple method to increase the partition coefficient of a slightly polar organic compound between diethyl ether and water is to adjust the pH of the aqueous phase.
For example, if the compound is a weak acid, increasing the pH of the aqueous phase (making it more basic) would deprotonate the compound, making it more polar and increasing its solubility in water. This would shift the partition equilibrium towards the aqueous phase, resulting in a higher partition coefficient in favor of diethyl ether. Conversely, if the compound is a weak base, decreasing the pH of the aqueous phase (making it more acidic) would protonate the compound, making it less polar and increasing its solubility in diethyl ether. This would shift the partition equilibrium towards the organic phase, resulting in a higher partition coefficient in favor of diethyl ether.
In summary, adjusting the pH of the aqueous phase is a simple method to manipulate the partition coefficient of a slightly polar organic compound between diethyl ether and water.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
Which sample produced the higher amount of radiation? O The sample with an activity of 8 kBq O The sample with an activity of 17 mCi
The sample with an activity of 17 mCi (629,000,000 Bq) produced a higher amount of radiation than the sample with an activity of 8 kBq (8,000 Bq).
To determine which sample produced the higher amount of radiation, we'll need to compare the activities of the two samples:
1. The sample with an activity of 8 kBq (kilo-Becquerels)
2. The sample with an activity of 17 mCi (milli-Curies)
First, let's convert both activities to a common unit, Becquerels (Bq).
1 kBq = 1,000 Bq
1 Ci = 37,000,000,000 Bq (37 billion Bq)
1 mCi = 0.001 Ci
Now, let's convert the activities:
- Sample 1: 8 kBq = 8,000 Bq
- Sample 2: 17 mCi = 17 * 0.001 Ci = 0.017 Ci = 0.017 * 37,000,000,000 Bq = 629,000,000 Bq
Comparing the activities, we find that the sample with an activity of 17 mCi (629,000,000 Bq) produced a higher amount of radiation than the sample with an activity of 8 kBq (8,000 Bq).
Learn more about radiation at brainly.com/question/13934832
#SPJ11
Complete the curved arTOw mechanism ot the tollowing double elimination reaction When 2,2-dichloro-3,3-dimethylbutane [ealcd with tWO equivalents of sodium amide and heated in mineral oil. Use three curved artows show the elimination of the first hydrogen chloride b) Use three curved arrows t0 show the elimination of the second hydrogen chloride:
a. The curved arrow mechanism for the double elimination reaction of 2,2-dichloro-3,3-dimethylbutane when treated with two equivalents of sodium amide and heated in mineral oil is a double bond between the two adjacent carbons and the release of hydrogen chloride (HCl).
b. The elimination of the second hydrogen chloride is another double bond between the two adjacent carbons and the release of another hydrogen chloride (HCl).
To complete the curved arrow mechanism for the double elimination reaction of 2,2-dichloro-3,3-dimethylbutane when treated with two equivalents of sodium amide and heated in mineral oil, follow these steps:
a) For the elimination of the first hydrogen chloride, use three curved arrows:
1. The lone pair of electrons on the nitrogen of sodium amide attacks a hydrogen atom on one of the carbon atoms adjacent to a chlorine atom in 2,2-dichloro-3,3-dimethylbutane.
2. The bond between the hydrogen and carbon breaks, and its electrons move towards the carbon-chlorine bond.
3. The carbon-chlorine bond breaks, with the electrons being taken by the chlorine atom, resulting in the formation of a double bond between the two adjacent carbons and the release of hydrogen chloride (HCl).
b) For the elimination of the second hydrogen chloride, use three curved arrows:
1. Another sodium amide molecule's lone pair of electrons on nitrogen attacks the remaining hydrogen atom on the carbon adjacent to the second chlorine atom in the reaction intermediate.
2. The bond between the hydrogen and carbon breaks, and its electrons move towards the carbon-chlorine bond.
3. The carbon-chlorine bond breaks, with the electrons being taken by the chlorine atom, resulting in the formation of another double bond between the two adjacent carbons and the release of another hydrogen chloride (HCl).
Learn more about curved arrows: https://brainly.com/question/31238711
#SPJ11
What is the ph of 0.21 M acetic acid to 1.00 L of which 1.43 g of sodium acetate, NaCH3CO2, has been added? (K, for acetic acid is 1.8 x 10^-5)pH =
To find the pH of the solution, we first need to calculate the concentration of acetate ions in the solution after the addition of sodium acetate.
We can start by calculating the number of moles of sodium acetate added:
1.43 g NaCH3CO2 x (1 mol NaCH3CO2 / 82.03 g NaCH3CO2) = 0.0174 mol NaCH3CO2
Since sodium acetate fully dissociates in water, we know that the number of moles of acetate ions in the solution is also 0.0174 mol.
Next, we need to calculate the new concentration of acetic acid in the solution. We can use the equation for the ionization of acetic acid:
CH3CO2H ⇌ CH3CO2- + H+
Ka = [CH3CO2-][H+] / [CH3CO2H]
At equilibrium, the concentration of acetic acid will be reduced by the amount of acetate ions that were added, so:
[CH3CO2H] = 0.21 M - 0.0174 M = 0.1926 M
We can now use the equilibrium equation and the given Ka value to solve for the concentration of H+ ions, and thus the pH:
1.8 x 10^-5 = (0.0174 M)(x) / (0.1926 M)
x = 1.576 x 10^-4 M
pH = -log[H+] = -log(1.576 x 10^-4) = 3.804
Therefore, the pH of the solution is approximately 3.804.
To learn more about sodium acetate visit;
https://brainly.com/question/12924347
#SPJ11
draw a dash-wedge structure for (3r)-3-methyl-5-hexen-3-ol.
The dash-wedge structure for (3r)-3-methyl-5-hexen-3-ol should look like this:
```
H H H
| | |
H-C=C-C-C-OH H-C-C-H
| |
H CH[tex]^{3}[/tex] (dash bond)
```
To draw a dash-wedge structure for (3R)-3-methyl-5-hexen-3-ol:
1. Identify the main carbon chain: The compound is a 6-carbon chain (hex), with a double bond at the 5th carbon (5-hexen), and an alcohol group at the 3rd carbon (3-ol).
2. Draw the main carbon chain: Begin by drawing the 6-carbon chain, including the double bond between carbons 5 and 6.
3. Add the alcohol group: Attach the -OH group to the 3rd carbon.
4. Add the methyl group: Attach a -CH[tex]^{3}[/tex] group to the 3rd carbon, ensuring that it's in the (3R) configuration.
5. Assign wedge and dash bonds: In the (3R) configuration, the -OH group is on a wedge bond, and the -CH[tex]_{3}[/tex] group is on a dash bond. This shows the spatial arrangement of these groups around the 3rd carbon, where the -OH group comes out of the plane and the -CH[tex]_{3}[/tex] group goes behind the plane.
Your final dash-wedge structure should look like this:
```
H H H
| | |
H-C=C-C-C-OH H-C-C-H
| |
H CH[tex]_{3}[/tex] (dash bond)
```
Remember that the wedge bond (for -OH) represents a bond coming out of the plane towards you, while the dash bond (for -CH[tex]_{3}[/tex]) represents a bond going behind the plane away from you.
More on dash-wedge structure: https://brainly.com/question/1596825
#SPJ11
The sketch below shows two marbles . The arrows show the size and the direction of the momentum of the two marbles . Draw arrows in the space below that show what will happen to these two marbles because of the law of conservation of momentum when they collide
The arrows representing the momentum of the marbles will reflect the conservation of momentum principle, where the total momentum of the system is conserved before and after the collision.
What is the final momentum of the marbles after the collision?Let the bigger marble = ALet the smaller marble = BBased on the information provided, the bigger marble (A) is moving to the right and has momentum in that direction. The smaller marble (B) is moving to the left and has momentum in that direction. When they collide, according to the law of conservation of momentum, the total momentum of the system will remain constant.
Therefore, after the collision:
Marble A (bigger) will continue to move to the right, but with a reduced momentum, as some of its momentum will be transferred to Marble B during the collision. The arrow representing the momentum of Marble A will be smaller in size than the initial arrow, but still pointing to the right.
Marble B (smaller) will change its direction and start moving to the right, as some of the momentum from Marble A will be transferred to it during the collision. The arrow representing the momentum of Marble B will be larger in size than the initial arrow, and pointing to the right.
Learn more about conservation of momentum here: https://brainly.com/question/7538238
#SPJ1
This food chain is incomplete. Two groups of organisms are missing. Evaluate the model to determine the other two missing groups and explain their role in the ecosystem.
Plants or other photosynthetic organisms capture solar solar radiation and convert it to chemical energy at the first trophic level of such a food chain or web.
What is the source of energy?For electricity generation, the main three types of energy are fossil fuels coal, natural gas, & petroleum, nuclear energy, or renewable energy sources. The majority of electricity is produced by steam turbines powered by coal and oil, nuclear, bio fuels, geothermal, or rather solar thermal energy.
How vital is power to humans?Energy is employed to power computer systems, transportation, communications, cutting-edge diagnostic supplies, and many other things. The need for dependable & affordable energy is now more pressing in developing countries. It has the potential to improve and potentially save lives.
To know more about energy visit :
https://brainly.com/question/8630757
#SPJ1
If we start with 0.100 mol/L of CO2 and H2, what are the concentrations of the reactants and products at equilibrium where Keq = 0.64 at 900K? For the system: CO2(g) + H2(g) + CO2(g) + H20 2. The reaction of nitrogen gas with hydrochloric acid is as follows: N2()+ 6 HCI (6) « 2 NH3 (®)+ 3 Cl2 (8) DH = 461 kJ Predict the effect of the following changes to the system on the direction of equilibrium 1. Triple the volume of the system
1. The concentration of CO and H2O produced at equilibrium is 0.032x mol/L. 2.The direction of equilibrium will shift to the left, towards N2(g) and HCl(g).
For the reaction CO2(g) + H2(g) + CO2(g) + H2O(g) ⇌ 2CO(g) + 2H2O(g), the equilibrium constant Keq is given as 0.64 at 900K. We can use this equilibrium constant to calculate the concentrations of the reactants and products at equilibrium.
Let the initial concentration of CO2 and H2 be x mol/L. Since there are two CO2 molecules in the reactants, their concentration at equilibrium will be (0.100 - x)/2 mol/L. Similarly, since there is only one H2 molecule in the reactants, its concentration at equilibrium will be (0.100 - x) mol/L.
Let the concentration of CO and H2O produced at equilibrium be y mol/L. Then, according to the balanced chemical equation, we have:
2CO(g) + 2H2O(g) ⇌ CO2(g) + H2(g) + CO2(g) + H2O(g)
At equilibrium, the concentration of CO2 and H2O in the products will also be (0.100 - x)/2 mol/L and (0.100 - x) mol/L, respectively. Therefore, the equilibrium expression can be written as:
Keq = [CO]²[H2O] ² / [CO2]²[H2]²[H2O]
Substituting the values, we get:
0.64 = (y²) / [(0.100 - x)²* x²* (0.100 - x)]
Solving for y, we get:
y = (0.64 * (0.100 - x)² * x²* (0.100 - x)) = 0.032x(0.100 - x)
The reaction of nitrogen gas with hydrochloric acid is N2(g) + 6HCl(g) ⇌ 2NH3(g) + 3Cl2(g), with a heat of reaction of 461 kJ.
When we triple the volume of the system, the total number of moles of gas in the system will also triple, but the number of moles of each species will remain the same.
According to Le Chatelier's principle, the equilibrium will shift in the direction that reduces the total pressure of the system.
Since the total number of moles of gas has increased, the total pressure of the system will also increase. To reduce the total pressure, the equilibrium will shift in the direction that produces fewer moles of gas. In this case, that means the equilibrium will shift towards the reactants, which have fewer moles of gas.
learn more about moles here:
https://brainly.com/question/28239680
#SPJ11
which one of the following pairs contains isoelectronic species? group of answer choices cr3 , v3 ca2 , cl- br-, cl- ca2 , br-
The pair that contains isoelectronic species is ca2 and br-. Both ions have the same number of electrons, which is 18.
Isoelectronic species are chemical species that have the same number of electrons or the same electronic structure. Among the given pairs, the isoelectronic species are:
Ca2+ and Br-
1. Ca2+: Calcium has an atomic number of 20, so it has 20 electrons in its neutral state. When it loses 2 electrons to form the Ca2+ ion, it has 18 electrons.
2. Br-: Bromine has an atomic number of 35, so it has 35 electrons in its neutral state. When it gains 1 electron to form the Br- ion, it also has 18 electrons.
Both Ca2+ and Br- have the same number of electrons (18), which makes them isoelectronic species.
Learn more about isoelectronic here
https://brainly.com/question/6807313
#SPJ11
consider this aqueous reaction. hno3(aq) ba(oh)2(aq)⟶ what is the formula for the salt that forms?
The formula for the salt that forms in this aqueous reaction is Ba(NO₃)₂.
What is the formula for the saltWhen HNO₃(aq) and Ba(OH)₂(aq) are mixed together, they undergo a double displacement reaction
This means that the positive ions (H⁺ and Ba₂⁺) and negative ions (NO₃⁻ and OH⁻) in the reactants swap partners to form new compounds.
In this case, the H⁺ and OH⁻ combine to form water (H₂O), which is a neutral compound and does not participate further in the reaction.
The remaining ions, Ba₂⁺ and NO₃⁻ ), combine to form the salt Ba(NO₃)₂.
Learn more about aqueous reaction at
https://brainly.com/question/14671482
#SPJ11
Discuss at least 3 different parameters that either were or could be used when comparing your zeolites to charcoal. These do not all have to be chemical properties. You do not have to compare the zeolites to charcoal using all three methods, but at least one of them should have been tested during the project.
When comparing zeolites to charcoal, three parameters can be considered: adsorption capacity, selectivity, and regeneration capability.
Firstly, adsorption capacity is a key parameter to assess how effective a material is at adsorbing contaminants from the environment. Zeolites and charcoal have distinct adsorption capacities due to their unique pore structures and surface areas. A test can be conducted by measuring the amount of a specific contaminant that each material can adsorb, thereby providing a comparison of their adsorption capacities. Secondly, selectivity is another important factor to consider, it refers to a material's ability to preferentially adsorb certain contaminants over others. While both zeolites and charcoal can adsorb various substances, their selectivities may differ for specific contaminants, this can be examined by exposing the materials to a mixture of contaminants and observing their adsorption rates and preferences.
Lastly, regeneration capability refers to the ease with which an adsorbent can be regenerated after adsorbing contaminants, this is crucial for the sustainability and cost-effectiveness of the adsorbent material. A comparison between zeolites and charcoal can be made by testing their regeneration capabilities, such as using heat or solvents to remove the adsorbed contaminants and restore their adsorption properties. In summary, comparing zeolites to charcoal can involve assessing parameters such as adsorption capacity, selectivity, and regeneration capability. These parameters provide valuable insights into the materials' effectiveness and suitability for specific applications.
Learn more about zeolites at:
https://brainly.com/question/28588461
#SPJ11
the ph of a 9.05x10-2 m solution of b(aq) is 11.706. calculate the kb
The Kb of the solution is 6.11 x 10^-6.
Write the balanced chemical equation for the reaction of B(aq) with water.
B(aq) + H2O(l) ⇌ BH+(aq) + OH-(aq)
Write the expression for the Kb of the reaction.
Kb = [BH+][OH-]/[B(aq)]
Calculate the concentration of OH- in the solution using the pH.
pH = 11.706
[OH-] = 10^(-pH) = 2.28 × 10^(-12) M
Calculate the concentration of BH+ using the charge balance equation.
[BH+] = [OH-] - [H+]
Assuming [H+] is negligible in comparison to [OH-], [BH+] ≈ [OH-]
[BH+] = 2.28 × 10^(-12) M
Calculate the concentration of B(aq).
[B(aq)] = 9.05 × 10^(-2) M
Calculate the Kb of the solution.
Kb = [BH+][OH-]/[B(aq)] = (2.28 × 10^(-12) M)(2.28 × 10^(-12) M)/(9.05 × 10^(-2) M) = 6.11 × 10^(-6)
Therefore, the Kb of the 9.05 × 10^(-2) M solution of B(aq) is 6.11 × 10^(-6).
For more questions like Concentration click the link below:
https://brainly.com/question/10725862
#SPJ11
at 25 ∘c , the osmotic pressure of a solution of the salt xy is 45.6 torr . what is the solubility product of xy at 25 ∘c ?
The solubility product of XY at 25 ∘C is 3.58 × 10⁻⁶.
The relationship between osmotic pressure and solute concentration for a solution is given by the equation;
π = MRT
where π will be the osmotic pressure, M will be the molar concentration of the solute, R will be the gas constant, and T is the temperature in Kelvin.
To find the solubility product of the salt XY, we need to first calculate its molar concentration from the given osmotic pressure. We can rearrange the above equation to solve for M
M = π / RT
Substituting the given values, we get;
M = 45.6 torr / (0.082 L·atm/mol·K × 298 K) = 0.00189 M
Now, we can write the solubility product expression for XY as:
Ksp = [X⁺][Y⁻]
Assuming that XY dissociates completely in water, the molar solubility of XY is equal to the concentration of X⁺ and Y⁻ ions:
[X⁺] = [Y⁻] = 0.00189 M
Substituting these values into the solubility product expression, we get:
Ksp = (0.00189 M)(0.00189 M) = 3.58 × 10⁻⁶
Therefore, the solubility product of XY at 25 ∘C is 3.58 × 10⁻⁶. The units for Ksp depend on the stoichiometry of the reaction, but for the given expression, the units would be (M)².
To know more about solubility product here
https://brainly.com/question/857770
#SPJ4
Calculate the solubility of Au(OH)3 in 1.5 M nitric acid solution: Ksp= 5.5*10^-46, express in 2 sig figs.
The solubility of Au(OH)₃ in 1.5 M nitric acid solution is approximately 6.3 x 10⁻¹⁶ mol/L.
To calculate the solubility of Au(OH)₃ in 1.5 M nitric acid solution, we need to consider the balanced chemical reaction:
Au(OH)₃(s) + 3HNO₃(aq) -> Au(NO₃)₃(aq) + 3H₂O(l)
Given the Ksp value for Au(OH)₃ is 5.5 x 10⁻⁴⁶, we can set up an equation to solve for the solubility (S) of Au(OH)₃:
Ksp = [Au(NO₃)₃][OH⁻]³
Since we have 1.5 M HNO₃, this means that for each mole of Au(OH)₃ dissolved, 3 moles of OH⁻ ions will react with 3 moles of HNO₃. Therefore, [OH⁻] = (S/3) and [HNO₃] = 1.5 - S. The equation becomes:
5.5 x 10⁻⁴⁶ = S(1.5 - S)³
Solving this equation for S, we get:
S ≈ 6.3 x 10⁻¹⁶ mol/L
Expressing the solubility in 2 significant figures, the solubility of Au(OH)₃ in 1.5 M nitric acid solution is approximately 6.3 x 10⁻¹⁶ mol/L.
Learn more about solubility here: https://brainly.com/question/23946616
#SPJ11
uring the wittig reaction a ____________________ group is converted to a(n) ____________________. 7) (1 pt.) the phosphonium halide reacts with a strong ______________ ; we will use
During the Wittig reaction, a carbonyl group is converted to an alkene. The phosphonium halide reacts with a strong base, and in this case, we will use an alkoxide as the strong base.
The wittig reaction is a reaction in which an aldehyde or ketone reacts with a Wittig Reagent (a triphenyl phosphonium ylide) to yield an alkene with triphenylphosphine oxide. The positive charge of Wittig reagents is taken by a phosphorus atom with three phenyl substituents and a bond to a carbanion
It is a carbon-carbon bond forming reaction.
for more questions on wittig reaction: https://brainly.com/question/30611258
#SPJ11
Calculate the pH of the buffer that results from mixing 52.2 mL of a 0.469 M solution of HCHO2 and 15.6 mL of a 0.509 M solution of NaCHO2. The Ka value for HCHO2 is 1.8×10−4.
[tex]pH = pKa + log([A-]/[HA]) = 3.79[/tex] Is the pH of the buffer that results from mixing 52.2 mL of a 0.469 M solution of [tex]HCHO2[/tex] and 15.6 mL of a 0.509 M solution of [tex]NaCHO2[/tex] . The Ka value for HCHO2 is [tex]1.8×10−4.[/tex]
First, calculate the moles of HCHO2 and NaCHO2:
moles [tex]HCHO2 = (52.2 mL / 1000 mL/L) * 0.469 mol/L = 0.0245[/tex] mol
moles [tex]NaCHO2 = (15.6 mL / 1000 mL/L) * 0.509 mol/L = 0.00794 mol[/tex]
Next, calculate the moles of the resulting buffer solution:
moles buffer = moles[tex]HCHO2 + moles NaCHO2 = 0.0324 mol[/tex]
Then, calculate the concentrations of [tex]HCHO2 and CHO2-[/tex] in the buffer solution:
[tex][HA] = moles HCHO2 /[/tex] total buffer volume = 0.0245 mol / 0.068 mL = 0.360 M
[A-] = moles NaCHO2 / total buffer volume = 0.00794 mol / 0.068 mL = 0.117 M
Finally, use the Henderson-Hasselbalch equation to calculate the pH:
[tex]pH = pKa + log([A-]/[HA]) = -log(1.8×10^-4) + log(0.117/0.360) = 3.79.[/tex]
learn more about pH here:
https://brainly.com/question/15289741
#SPJ11
Which of the following reagents react readily with bromobenzene ?
(a) NaNH₂ / NH₃ at -33°C
(b) (CH₃)₂NH at. 25°C
(c) CH₃CH₂ONa at. 25°C
(d) NaCN/DMSO at. 25°C
The reagent that reacts readily with bromobenzene is (CH₃)₂NH at 25°C.
So the correct answer is B.
This is because (CH₃)₂NH is a strong nucleophile and can easily attack the electrophilic carbon of the bromobenzene to form a new bond. The other reagents listed may not be as effective in reacting with the bromobenzene under the given conditions.
For example, (a) NaNH₂/NH₃ at -33°C is a strong base and may not react as readily at such a low temperature. (c) CH₃CH₂ONa at 25°C may also not react as readily as (b) because it is a weaker nucleophile. (d) NaCN/DMSO at 25°C is a good nucleophile but may not be as effective in reacting with bromobenzene as (b) (CH₃)₂NH because DMSO is a polar aprotic solvent, which may not provide the optimal environment for the reaction to occur.
Learn more about reagents at https://brainly.com/question/26905271
#SPJ11
assign oxidation numbers to each atom in rh(c2o4)2
The oxidation numbers for each atom in Rh(C2O4)2 are: Rh = +4(each), C = +2 (each), and O = -2 (each).
Assign oxidation numbers to each atom in Rh(C2O4)2:
1. Identify the oxidation numbers of the known atoms: In this compound, we know that the oxidation number of oxygen (O) is always -2 (except in peroxides).
2. Analyze the oxalate ion (C2O4)^2-: Since there are two oxygen atoms (each with an oxidation number of -2), their combined oxidation number is -4.
To balance the charge of the ion, the two carbon atoms must have a combined oxidation number of +4. Each carbon atom, therefore, has an oxidation number of +2.
3. Determine the oxidation number of Rh: In the compound Rh(C2O4)2, there are two oxalate ions, each with a charge of -2, resulting in a total negative charge of -4. To balance this charge, the oxidation number of Rh must be +4.
In summary, the oxidation numbers for each atom in Rh(C2O4)2 are: Rh = +4, C = +2 (each), and O = -2 (each).
To know more about oxidation number:
https://brainly.com/question/30770473
#SPJ11
11c decays by positron emission. balance the nuclear equation by giving the mass number, atomic number, and element symbol for the missing species.
The balanced nuclear equation for the decay of 11c by positron emission is:
11c --> 11B + 0+1e
When 11c undergoes positron emission, it releases a positron (a particle with the same mass as an electron but with a positive charge) and becomes a new, lighter element.
To balance the nuclear equation and determine the missing species, we need to ensure that the mass numbers and atomic numbers on both sides of the equation are equal.
The balanced nuclear equation is:
11c --> 11B + 0+1e
Here, the mass number on the left side is 11 (since the isotope has 11 protons and 11 neutrons), and the atomic number is 6 (since the isotope is carbon, which has 6 protons).
On the right side, we see that a positron (0+1e) is produced, along with a new element with a mass number of 11 and an atomic number of 5. This element is boron (B), which has 5 protons.
So the missing species in the balanced nuclear equation is boron-11 (11B).
To learn more about positron emission click here https://brainly.com/question/20388835
#SPJ11
identify the unknown amino acid by comparing the color of the unknown spot and its rf value to the known amino acids. record the identity of the amino acid in the unknown.
To identify the unknown amino acid, you will need to run an amino acid chromatography experiment using the unknown amino acid and a set of known amino acids as reference.
Once the chromatography is complete, compare the color of the unknown spot and its rf value to the known amino acids. Based on the color and rf value, you can determine the identity of the unknown amino acid. Record the identity of the amino acid in the unknown for future reference.
To identify the unknown amino acid, you should follow these steps:
1. Compare the color of the unknown spot to the colors of known amino acids. If the colors match, it suggests the unknown amino acid might be the same as the known one.
2. Calculate the Rf value (retention factor) of the unknown spot by dividing the distance the spot traveled by the distance the solvent traveled.
3. Compare the Rf value of the unknown spot to the Rf values of known amino acids. If the values are similar or match, it further supports the identity of the unknown amino acid.
4. Record the identity of the amino acid in the unknown based on the color and Rf value comparisons. If both factors match a known amino acid, it is likely that the unknown amino acid is the same as the known one.
Visit here to learn more about chromatography : https://brainly.com/question/30907934
#SPJ11
To identify the unknown amino acid, you will need to run an amino acid chromatography experiment using the unknown amino acid and a set of known amino acids as reference.
Once the chromatography is complete, compare the color of the unknown spot and its rf value to the known amino acids. Based on the color and rf value, you can determine the identity of the unknown amino acid. Record the identity of the amino acid in the unknown for future reference.
To identify the unknown amino acid, you should follow these steps:
1. Compare the color of the unknown spot to the colors of known amino acids. If the colors match, it suggests the unknown amino acid might be the same as the known one.
2. Calculate the Rf value (retention factor) of the unknown spot by dividing the distance the spot traveled by the distance the solvent traveled.
3. Compare the Rf value of the unknown spot to the Rf values of known amino acids. If the values are similar or match, it further supports the identity of the unknown amino acid.
4. Record the identity of the amino acid in the unknown based on the color and Rf value comparisons. If both factors match a known amino acid, it is likely that the unknown amino acid is the same as the known one.
Visit here to learn more about chromatography : https://brainly.com/question/30907934
#SPJ11
A 120-V AC circuit has a 20.0-? resistor connected in series to a capacitor for which the capacitive reactance is XC = 41.0 ? .
Part A
What is the phase constant?
? =
Part B
What is the average rate at which energy is dissipated in the circuit?
Pav =
Part C
If the resistance in the circuit is 25.0 ?, what would the capacitive reactance have to be in order for the power factor to be 0.37?
XC =
Part A: The phase constant for the given circuit is 1.13 radians, Part B: The average rate at which energy is dissipated in the circuit is zero, Part C: The capacitive reactance required for the power factor of 0.37 with a resistance of 25.0 is 67.3.
Part A:
The phase constant, denoted by Φ, is the phase angle between the voltage across the circuit and the current through the circuit. In an AC circuit with a resistor and a capacitor in series, the phase constant is given by the formula:
tan Φ = XC/R
where XC is the capacitive reactance and R is the resistance of the circuit. Substituting the given values, we get:
tan Φ = (41.0) / (20.0 ) = 2.05
Taking the inverse tangent of both sides, we get:
Φ = tan⁻¹(2.05) = 1.13 radians
Therefore, the phase constant is 1.13 radians.
Part B:
The average rate at which energy is dissipated in the circuit is given by the formula:
Pav = VIcosΦ
where V is the voltage across the circuit, I is the current through the circuit, Φ is the phase constant, and cosΦ is the power factor of the circuit. In this circuit, the voltage across the circuit is 120 V and the current through the circuit is:
I = V / Z
where Z is the impedance of the circuit. For a series circuit with a resistor and a capacitor, the impedance is given by:
Z = (R² + XC²)
Substituting the given values, we get:
Z = ((20.0)² + (41.0)² = 46.2
Therefore, the current through the circuit is:
I = (120 V) / (46.2 ) = 2.60 A
The power factor of the circuit is given by:
cosΦ = R / Z
Substituting the given values, we get:
cosΦ = (20.0) / (46.2) = 0.433
Therefore, the average rate at which energy is dissipated in the circuit is:
Pav = (120 V) x (2.60 A) x (0.433) x cos(1.13 radians) = 0
Since cos(1.13 radians) is close to zero, the average rate at which energy is dissipated in the circuit is effectively zero.
Part C:
The capacitive reactance required for the power factor of 0.37 with a resistance of 25.0 is given by the formula:
XC = R x tan(acosPF)
where PF is the desired power factor and acos is the inverse cosine function. Substituting the given values, we get:
XC = (25.0) x tan(acos(0.37)) = 67.3
Therefore, the capacitive reactance required for the power factor of 0.37 with a resistance of 25.0 is 67.3.
learn more about capacitive reactance here:
https://brainly.com/question/30050467
#SPJ11
draw the structure that corresponds to the following information: molecular formula: c7h8c7h8 proton-decoupled c13c13 nmr: δ 21.3, δ 125.7, δ 128.6, δ 129.0, δ 138.4 ppm.
The structure corresponding to this molecular formula and NMR data is Toluene. Toluene has the following structure:
CH3
|
C6H5 - C. Based on the molecular formula C7H8, we can infer that this molecule contains 7 carbon atoms and 8 hydrogen atoms.
Based on the provided information, the molecular formula is C7H8. The proton-decoupled 13C NMR data shows 5 unique carbon peaks: δ 21.3, δ 125.7, δ 128.6, δ 129.0, and δ 138.4 ppm. This suggests the presence of a benzene ring with an additional carbon atom attached. The benzene ring (C6H5) has carbon atoms with chemical shifts at δ 125.7, δ 128.6, δ 129.0, and δ 138.4 ppm, while the methyl group (CH3) attached to the benzene ring has a chemical shift at δ 21.3 ppm.
To determine the structure, we need to interpret the proton-decoupled C13 NMR spectrum. The peaks at δ 21.3 and δ 125.7 indicate the presence of a methyl group and an sp3-hybridized carbon, respectively. The peaks at δ 128.6, δ 129.0, and δ 138.4 correspond to three sp2-hybridized carbons. Therefore, the structure that corresponds to this information is likely a molecule with a benzene ring and a methyl group attached to one of the carbons in the ring. The molecular formula and NMR data are consistent with the structure of toluene (C6H5CH3). The C13 NMR spectrum shows five distinct carbon environments, corresponding to the six carbons in the benzene ring and the methyl group.
Learn more about molecular formulas here: brainly.com/question/28647690
#SPJ11
A fuel tank holds 22.3 gallons of gasoline. If the density of gasoline is 0.8206g/mL, what is the mass in Kilograms of gasoline in a full tank?
A full tank of 22.3 gallons of gasoline has a mass of 69.26 kilograms.
What is density?Density is a physical property that helps us to identify substances, calculate the volume of an object, and calculate the pressure of fluids.
To calculate the mass of gasoline in a full tank of 22.3 gallons, the following equation can be used:
Mass (kg) = Volume (gallons) × Density (g/mL) × 0.003785
Therefore, the mass of gasoline in a full tank of 22.3 gallons is:
Mass (kg) = 22.3 gallons × 0.8206 g/mL × 0.003785
Mass (kg) = 69.26 kg
This means that a full tank of 22.3 gallons of gasoline has a mass of 69.26 kilograms.
This is because the density of gasoline is 0.8206 g/mL, which means that for every milliliter of gasoline, there are 0.8206 grams.
Since a gallon is equivalent to 3785 milliliters, the mass of gasoline in a full tank of 22.3 gallons can be calculated by multiplying the volume (22.3 gallons) by the density (0.8206 g/mL) and then multiplying by 0.003785 to convert the result to kilograms.
For more questions related to gasoline
https://brainly.com/question/25736513
#SPJ1
Calculate the pKa value of Phosphoric Acid H3PO4 Ka = 6.3*10^-3
The pKa value of Phosphoric Acid H3PO4 is approximately 2.20. The pKa value of Phosphoric Acid H3PO4 can be calculated using the formula pKa = -log(Ka), where Ka is the acid dissociation constant.
To calculate the pKa value of Phosphoric Acid (H3PO4), you will need to use the given Ka value. The pKa value can be found using the following formula:
pKa = -log10(Ka)
Given that Ka = 6.3 * 10^-3, you can calculate the pKa as follows:
pKa = -log10(6.3 * 10^-3)
pKa ≈ 2.20
Therefore, the pKa value of Phosphoric Acid (H3PO4) is approximately 2.20.
Given that the Ka of Phosphoric Acid is 6.3*10^-3, we can plug this value into the formula to get:
pKa = -log(6.3*10^-3)
Using a calculator, we get:
pKa = 2.20
Therefore, the pKa value of Phosphoric Acid H3PO4 is approximately 2.20.
Learn more about Phosphoric Acid here: brainly.com/question/3700851
#SPJ11
what is the structural formula of 2-methylbutan-2-ol (sometimes called 2-methyl-2-butanol)? draw the molecule by placing atoms on the grid and connecting them with bonds. include all hydrogen atoms.
The structural formula of 2-methylbutan-2-ol is: CH3-C(OH)(CH3)-CH2-CH3
For the structural formula of 2-methylbutan-2-ol.
Here is the step-by-step explanation:
1. Begin with the main chain of four carbon atoms, as "butan" indicates a four-carbon chain:
C-C-C-C
2. The "2-methyl" part tells us that there's a methyl group (CH3) attached to the second carbon atom in the chain:
C-C(CH3)-C-C
3. The "2-ol" part indicates that there's a hydroxyl group (OH) also attached to the second carbon atom:
C-C(CH3)(OH)-C-C
4. Finally, fill in the remaining bonds with hydrogen atoms to satisfy the valency requirements for each carbon atom:
H3C-CH(OH)(CH3)-CH2-CH3
So, the structural formula of 2-methylbutan-2-ol is:
CH3-C(OH)(CH3)-CH2-CH3
learn more about structural formula Refer: https://brainly.com/question/14611418
#SPJ11