find the percent by mass of sodium chloride in a 1.45 m nacl solution. the density of the solution is 1.07 g/ml .

Molecular exclusion chromatography can be used to measure the molecular mass of a protein as it separates the proteins on the basis of molecular mass.

Exclusion chromatography refers to those chromatographic techniques that divide sample components based on their molecular weight. Several of these methods are now under development, and it is practical to categorize them into two groups: sieving separations and gel permeation.

The chromatographic technique known as size-exclusion chromatography (SEC), also referred to as molecular sieve chromatography, separates molecules in solution based on their size and, in some situations, molecular weight. Proteins and commercial polymers are typical examples of big molecules or macromolecular complexes to which it is typically applied.

Thus, molecular exclusion chromatography can be used as it separates the proteins on the basis of molecular mass.

To know more about Molecular exclusion chromatography visit the link:

https://brainly.com/question/24210741?referrer=searchResults

#SPJ4

The Van der Waals equation is a cubic in the molar volume. Since this is the first equation of state studied.

The Van der Waals equation is a cubic in the molar volume. Since this is the first equation of state studied in chemistry and physics more complicated than the ideal gas equation, it is noteworthy that the solution of this cubic is rarely if ever addressed.

Van der Waals' equation says that the volume of a real gasoline is the quantity that would be occupied via non-interacting point masses, V ideal fuel, plus the powerful extent of the gasoline molecules themselves.

The precise gasoline equation is equally legitimate for any gasoline, whereas the van der Waals equation carries a couple of constants (a and b) that trade from fuel to gas. the perfect gasoline equation predicts that a plot of PV versus P for a gasoline could be a horizontal line due to the fact PV ought to be a steady.

Learn more about Van der Waals here:- https://brainly.com/question/7302004

#SPJ4

The total number of moles are given by n = 0.25 moles and N=6.022×10²³molecules/mole is the Avogadro number. N is equal to 6.0220 × 10²³ molecules/mole. Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.

The International System of Units uses the mole symbol as mol as the unit of material quantity. How many elementary entities of a certain substance are present in an item or sample is determined by the quantity of that material. It is specified that the mole contains precisely 6.022 × 10 ²³ elementary entities.

The term was generally first used by German chemist Wilhelm Ostwald. However, the Latin term moles, which meaning "a mass," is where the word mole ultimately originates, not from German. A comparable term to mole is molecule, it is the diminutive and means "a little mass."

Therefore, there are 1.51 × 10²³ molecules overall 1.05 × 10²³ molecules.

To learn more about mole follow the link below;

https://brainly.com/question/26416088

#SPJ1

To determine the concentration of the hydrobromic acid, the student would need to perform titration and take readings.

Titration is the gradual addition of one answer of a regarded concentration to a recognized quantity of some other solution of unknown awareness till the reaction reaches neutralization, which is regularly indicated via a color trade.

The reason of the titration is the detection of the equivalence point, the factor at which chemically equivalent amounts of the reactants had been mixed. the quantity of reactants which have been combined at the equivalence factor depends on the stoichiometry of the reaction.

Titration is a not unusual laboratory technique of quantitative chemical evaluation to determine the awareness of an diagnosed analyte. A reagent, termed the titrant or titrator, is prepared as a standard answer of recognised concentration and extent.

Learn more about Titration here:- https://brainly.com/question/25380604

#SPJ4

Hydrogen is the first element to have a different number of proton and neutron in the nucleus

Hydrogen is a chemical element with symbol H and atomic number 1 classified as nonmetal hydrogen is gas at room temprature and hydrogen a gaseous material that is colorless odorless and tasteless and flammable and is the most basic chemical element and a proton with one unit of positive electrical charge and an electron with one unit of negative electrical charge make up the hydrogen atom nucleus

Hydrogen makes up around 0.14 percent of the weight of the earth crust and despite being the most common element in the universe and three times as abundant as helium and the next most frequent element and the water in ocean, ice cap and river as well as lakes and atmosphere all contain significant amount of it and for most common isotope of hydrogen each atom has one proton and in electron and no neutron

Know more about proton

https://brainly.com/question/29409302

#SPJ4

The average kinetic energy of water molecules increases when H₂O at 10°C changes to  H₂O 20 °C.

The average kinetic energy of the substance increases when it does not undergo a phase change but the temperature will increases. as water molecule when  H₂O at 10°C changes to  H₂O 20 °C. when it is heated. When the temperature increases the kinetic energy increases. the average kinetic energy is given as :

K = ( 3/2 ) ( R/ Na)  T

where,

K = average kinetic energy

R = gas constant

Na = Avogadro's number

T = temperature

Thus, The average kinetic energy of water molecules increases when H₂O at 10°C changes to  H₂O 20 °C.

To learn more about kinetic energy here

https://brainly.com/question/11034317

#SPJ1

An aquifer is an underground layer of rock saturated with water. Water from rain, meltwater, lakes, streams, and wetlands seeps into the soil and collects in rock crevices, much like water collects in a sponge.

Aquifers are saturated rock bodies in which water can readily move. Aquifers should include rock types such as sandstone, conglomerate, crushed limestone, loose sand and gravel, and be both permeable and porous. Fractured volcanic rocks such as columnar basalt are also good aquifers.

Many aquifers are like reservoirs, storing useful water for humans and aquatic ecosystems. Groundwater can naturally exit the aquifer as springs. When the water table of the aquifer reaches the surface, groundwater is released into rivers and lakes as surface water.

To know more about Aquifer

https://brainly.com/question/14916917

#SPJ4

Answer:

Chemistry

Explanation:

Chemistry is often called the central science because of its role in connecting the physical sciences, which include chemistry, with the life sciences and applied sciences such as medicine and engineering. The nature of this relationship is one of the main topics in the philosophy of chemistry and in scientometrics.

The product(s) formed from dehydration of the following alcohols with pocl3 in pyridine is 2-Methylpent-2-ene.

The dehydration word is composed of two words, de- means remove and hydration means water. The dehydration reaction is defined as the removal of water molecules from the substrate molecule.

We are told to find the product that would be expected POCl3 in pyridine.

The major product obtained in the above reaction is identified by considering the Saytzeff rule according to which the more substituted alkene is the major product due to its greater stability.

Therefore, on dehydration of  2-Methylpentan-3-ol gives 2-Methylpent-2-ene as the major product and 2-Methylpent-3-ene as the minor product.

Learn more about dehydration at:

brainly.com/question/12261974

#SPJ4

The hydrogen ion concentration of the substance in Vinegar is 1.098 and in case of milk it is 1.871

pH is a measure of how acidic or basic water is. The pH scale actually ranges  from 0 - 14, with 7 being neutral. pHs that are less than 7 indicate that it is  acidic in nature , whereas a pH of greater than 7 indicates that it is  basic in nature. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions present  in the water.

The formula to find pH is as follows;

pH = -log[tex][H]^{+}[/tex], In the above given question we need to find out the hydrogen ion concentration so we can rearrange the formula as;

[tex][H]^{+}[/tex] = Antilog pH

In case of Vinegar [tex][H]^{+}[/tex] = Antilog of 3 ⇒ 1.098

In case of Milk [tex][H]^{+}[/tex] = Antilog of 6.5 ⇒ 1.871

To know more about hydrogen ion concentration

https://brainly.com/question/15082545

#SPJ4

Due of the heat loss, the heat capacity values discovered will be too low.

The values for a substance's heat capacity are the amount of heat needed to increase a substance's unit mass by one degree Celsius is referred to as its heat capacity. The calorimetry method is employed to ascertain a  substance's heat capacity. It is assumed that no heat is wasted during the procedure when using the calorimetry method. According to the principle, the amount of heat gained and lost is equal.

Therefore, the heat capacity value will be lower than the actual values if heat is lost from the calorimeter when estimating the heat capacity of a substance.

To know more about heat capacity, please refer:

https://brainly.com/question/27991746

#SPJ1

The mass % of water in the hydrated salt is 47.34%

Mass % is the mass of the element or solute divided by the mass of the compound or solute

Here given data is

Mass =  130.863 g/mol

3 mol of water associated with it

We have to calculated mass % of water in the hydrated salt = ?

So mass of anhydrous salt  = 160.167g/mol

Mass of the hydrated salt = 160.167 + 8(18)

160.167 + 144 = 304.167g

% mass of water in hydrated salt = (144/304.167) ×100 = 47.34%

Know more about hydrated salt

https://brainly.com/question/14650730

#SPJ4

The energy of a photon is quantized, as demonstrated by Planck's formula, which is given by the equation E = h v, where h is the Planck constant, with a value of 6.626 x 10^34 Js, and is the photon's frequency.

The energy of photons is quantized because E = N h v gives the energy of N number of photons.

What is Planck's constant used for?

At the atomic scale, the behavior of particles and waves is described by Planck's constant. One of the factors that led to the development of quantum mechanics is Planck's constant.

Answer is,

One mole of O₂ contains 6.022× 10²³ molecules, hence, the energy required per molecule(per bond) is

E = [tex]\frac{E per mole}{6.022 X 10^(23) molecules/mole}\\[/tex]

substituting,  for E per mole as 495 x 10^23,

E =8.219 x 10^-19 J

The longest wavelength of radiation for breaking the bond.

E = [tex]\frac{hc}{lambda}[/tex]

Substituting, h = 6.626 x 10^-34 Js

                     c =3 x 10^8 ms

                     E =8.219 x 10^-19 J

wavelength = 241.85 nm

To learn more about quantum mechanics follow the link:

https://brainly.com/question/29426094

#SPJ4

Of the following atoms (oxygen, sulfur, selenium, tellurium, and polonium), oxygen has the smallest atomic radius. In the periodic table, the trend atomic radius is increases down the group.

Atomic radius is one of the periodic properties defined in the periodic table. Atomic radius is the distance to the nucleus that accounts for 95% of the electron load of the density. It can be defined as a function of internuclear distance. This distance varies, depending on whether the atoms are connected by chemical bonds or simply touching without forming a bond.

Atomic radius is a periodic property that increases with period (top to bottom) and decreases with group (left to right). Additional electron shells are added because the atomic radius increases with the number of planes occupied.

The elements when arranged from smallest to largest atomic radius is given as;

Oxygen < Sulfur < Selenium < Tellurium < Polonium

therefore the smallest atomic radius is oxygen.

learn more about atomic radius in  https://brainly.com/question/13963619

#SPJ4

Yes, it is possible that the cube is made out of aluminum.

It is known to us that the density of aluminum is 2.7 g/cm³. The weight of the cube is 22.304 g and the dimensions of the cube are 2.05 cm x 2.10 cm x 2.15 cm. The volume of the cube is computed by,

Volume of cube = a³

a³ = (2.1)³

    = 4.428 cm³.

If you divide the weight of the cube by the volume of the cube, we get

Density = 22.304/4.428

             = 5.04 g/cm³.

This is close to the density of aluminum, so it is possible that the cube is made out of aluminum. If the student had made errors in their measurements, it is possible that the cube is made out of another material.

But if there were no errors in the making of the cube, there is a high possibility that the cube is made out of aluminum. As aluminum is in fact a lustrous metal and is light in weight.

To know more about mass, click below:

https://brainly.com/question/19385703

#SPJ1

H2Se(g) + 402F2(g) ⇒SeF6(g) + 2HF(g) + 4O2(g) is true regarding following points ;

B. the oxidation number of H changes from -1 to +1 we can see as in H2Se changes to 2F.

C. the oxidation number of F changes from -1 to +1 we can see in O2F2 to        

     4O2.

D. the oxidation number of Se changes from -2 to +6 as we can see in H2Se to SeF6.

oxidation number also called oxidation state, is the total number of electrons that an atom either gains or loses in order to form a chemical bond with another atom.

disproportionation reaction is the type of reaction when the compound is converted into 2 oxidation states one of higher and one of lower oxidation state.

learn more about oxidation number here;

https://brainly.com/question/27239694

#SPJ4

The metallic bonds and the ionic bonds do involve charged species while the covalent bonds do not involve charged species.

The term bond has to do with the interactions that holds two atoms together. There are different kinds of bonds that we have in chemistry and these include;

The ionic bond involves the transfer of electrons from one atom to another usually from a metal to a non metal. This results in the formation of ions. In the metallic bond, there is a sea of electrons that lies over metallic ions. In the case of the metallic bonds and the ionic bonds, there are charged species that are present in the system.

For the covalent bonds, there is a sharing of electrons in the bond and then many of the compounds that have the covalent bonds are fond to be nonpolar.

Learn more about ionic bonds:https://brainly.com/question/11527546

#SPJ1

When expose to the chemicals, species are highly susceptible to the poison.

What is concentration?

A substance's concentration is the amount of solute present in a given amount of solution. Molarity is the number of moles of solute in one liter of solution and is used to express concentrations.

The LD50 can be calculated for any route of administration, including dermal and oral contact or ingestion of chemicals. A species with a high LD50 has a high tolerance to the poison. A low LD50 indicates that the species is extremely vulnerable to the poison.

To learn more about concentration from the given link:

https://brainly.com/question/17206790

a. The mean rate of reaction after 15 seconds is 1.03 g/second.

b. After 60 seconds, the reaction has gone to completion.

The rate of reaction is the rate at which product molecules are formed or the rate at which reactant molecules disappear.

The rate of reaction measures the time it takes for 1 mole of reactant to be converted to the product or the time it takes for one mole of product to be formed from reactants.

Mathematically;

The rate of the given reaction is determined as follows:

a. mean rate of reaction after 15 seconds = (13 + 18) / (10 + 20)

mean rate of reaction after 15 seconds = 1.03 g/second

B, the reaction goes to completion when the mass of CO₂ produced remains constant or unchanged.

The mass of CO₂ produced remains constant after 60 seconds.

Learn more about reaction rate at: https://brainly.com/question/1898560

#SPJ1

Green is represented with an absorption wavelength of 500 nm. As a result, it will absorb green and display red, which is complementary to green.

What is the electromagnetic spectrum?  

The electromagnetic spectrum is made up of the many wavelengths and associated frequencies of light. The speed of light constantly establishes a relationship between shorter frequencies and longer wavelengths. Because they have the shortest wavelengths, gamma rays can ionize material. The longest lengths are found in radio waves, whose wavelengths can exceed 100,000 km.

Between the ultraviolet and infrared spectra, the visible spectrum has wavelengths.

This is a reference to spectroscopic techniques that calculate how much radiation interacts with a substance, depending on its frequency or wavelength, and how much of that radiation is absorbed. Absorption spectroscopy utilizes the full electromagnetic spectrum.

So, the correct option is green.
To learn more about the electromagnetic spectrum follow the link:
https://brainly.com/question/29431060
#SPJ4

The possibility of the presence of maximum number of electrons in an atom with the quantum numbers n = 5, ℓ = 2, mℓ = -2, ms = +½. is 8.

Generally, n is called principal quantum number and it indicates the energy levels or energy shells in an atom.

While m represent the magnetic quantum numbers and it shows the total number of electron which share these quantum numbers.

When n = 5 for an electron, then the value of l can be l = {0; 1 ; 2 ; 3; 4} and the values of magnetic quantum numbers lie between -l and + l.

When m1 = 1 then l can be {1 ; 2 ; 3; 4} and similarly, the spin quantum number can have values between m(s) = { +1/2, -1/2}

To put it simply, electrons with opposite spin share only one orbital and thus there will be total 8 electrons.

n = 5, l = 1, m1 = 1 and ms = ± 1/2

If you need to learn more about quantum numbers click here:

https://brainly.com/question/2292596

#SPJ4

A redox reaction can be divided into two half reactions, each of which represents one aspect of electron transfer.

A redox reaction can be defined as a chemical reaction in which the  electrons are transferred between two reactants that are  participating in the chemical reaction. This transfer of electrons can be identified by observing the changes in the oxidation states of the reacting species.

By doing so we can differentiate two types of reactions happening here one is called as the oxidation reaction and the other is called as the reduction reaction. These reactions are individually known as the half cell reactions. When we combine these half cell reactions we get a redox reaction.

To know more about redox reactions

https://brainly.com/question/13293425

#SPJ4

T.aq dna polymerase is used in pcr reactions rather than a normal dna polymerase because-

(a) It is thermostable and maintains activity even when high temperatures cause the DNA in the (bacteria) Thermus acquaticus to become denaturized.

(b) Getting several copies of the desired gene (or DNA).

How does taq dna polymerase work?

Thermus aquaticus, also known as T.aquaticus, is a bacterium found in hot springs and hydrothermal vents. Taq polymerase was found to be an enzyme that could tolerate the protein-denaturing conditions like high temperature needed for PCR. Therefore, the DNA polymerase employed in PCR process comes from a specific source.

Thermus aquaticus, a thermophilic microorganism capable of surviving and reproducing in thermal hot springs with temperatures nearing 100 degrees Centigrade, such as those found in Yellowstone National Park, was discovered to contain the Thermus aquaticus enzyme in active form.

The enzyme was discovered to be perfect for PCR processes since an aliquot of enzyme did not need to be added after each cycle of denaturation since at this temperature  double stranded DNA is denatured.

To learn more about pcr reactions from the given link

https://brainly.com/question/7177771

#SPJ4

The heat is required to raise the temperature of 250.0 g of mercury by 52 °C is 1820 J.

given that :

mass = 250 g

ΔT = 52 °C

specific heat capacity of mercury = 0.14 J/g °C

the specific heat capacity expression is given as:

Q = mc ΔT

where,

Q = heat

m = mass = 250 g

ΔT = change in temperature = 52 °C

putting the values in the formula, we get :

Q = mc ΔT

Q = 250 × 0.14 × 52

Q = 1820 J

Thus,  The heat is required to raise the temperature of 250.0 g of mercury by 52 °C is 1820 J.

To learn more about specific heat here

https://brainly.com/question/16531422

#SPJ1

Answer: Reactants are starting materials and are written on the left-hand side of the equation. Products are the end result of the reaction and are written on the right-hand side of the equation.

Explanation:

Hope this helps!! And you're welcome!

Answer:

bro Ur in my school lol

Explanation:

Answer:

Explanation:

There will be no attractive or repulsive force between the two types of magnets. its A i took this quiz and got it correct. ^^

The Ecell decreases with an increase in molar concentration of [Zn2+].

Concentration cells work to establish equilibrium by transferring electrons from the cell with the decreased concentration to the cell with the higher concentration. The electrode capability distinction between the two half-cells may be calculated with the use of the Nernst equation.

Description. Zinc (II) ion, additionally known as ZN2+ or zinc ion, belongs to the elegance of inorganic compounds called homogeneous transition metal compounds. these are inorganic compounds containing only metallic atoms, with the most important atom being a transition metal atom. Zinc (II) ion is possibly impartial.

A concentration cell acts to dilute the extra-focused answer and pay attention to the more dilute answer, growing a voltage as the cell reaches an equilibrium. this is finished by using shifting the electrons from the mobile with the lower awareness to the cell with the better concentration.

Learn more about concentration here:-https://brainly.com/question/26756988

#SPJ4

Answer:

[Zn2+] anode < [Zn2+] cathode

Explanation:

The anode is the electrode where electricity moves into. The cathode is the electrode where electricity is given out or flows out. Anode is going to be negative and the cathode is going to be positive.

Answer:

What's the question though?

Answer:

android.

Explanation:

trust