Answer: The molar mass of ammonium dichromate is 252.06 g/mol
Hope this helped :)
1. Put 0.000 034 into scientific notation.
Answer:
3.4x10 to the power of 5
Explanation:
Answer:
My answer to the question is 3.4×10^-5.
____is used as anode for prevention of corrosion 1 aluminium 2 magnesium 3 iron
Answer:
I'm not sure but I think the answer is Cathodic protection.
An abandoned Indiana coal mine spoil bank (wastes) contains chunks of pyrite minerals. Under constant erosion and weathering, the pyrites leach large amounts of sulfuric acid (H2SO4). The spoil banks are also mixed with large quantities of basic limestone and clay carbonates. What should occur over time?
Answer:
The acid will be neutralized overtime
Explanation:
The presence of the pyrites leads to the leaching of large amounts of sulphuric acid, however the basic carbonates neutralizes the acid according to the reaction equation;
CaCO3 + H2SO4 ---> CaSO4 + CO2 + H2O.
This will prevent all the deleterious consequences associated with the leaching of the acid in the abandoned coal mine.
b. What is the mass of a piece of wood that has a volume of
25.3cm® and a density of 0.75g/cm?
Answer:
Explanation:
[tex]\frac{mass}{volume} =density\\mass=volume \times density=25.3 \times 0.75=18.975 ~gm[/tex]
Why do scientists prefer using the Kelvin Scale of temprature?
Probably because they think it is more accurate.
Hope it helps.
Fill in the blanks below.
1. The equation shows a _________the breaking and forming of chemical bonds that leads to a change in the composition of matter
2. In the equation, CO2 is a________
3. In the equation, C6H1206 is a ___________
4. In O2, the type of bond that holds the two oxygen atoms together is a___________
5. In H2O, the type of bond that holds one of the hydrogen atoms to the oxygen atom is a________
6. The number of oxygen atoms on the left side of the equation is___________ the number of oxygen atoms on the
Chemical equation
right side.
reactant
product
nonpolar
covalent bond
polar
covalent bond
equal to
different from
hydrogen bond
Answer:
Explanation:
6CO₂ + 6 H₂O ⇄ C₆H₁₂0₆ + 6O₂
This is the chemical equation given .
1. The equation shows a __Chemical equation_______the breaking and forming of chemical bonds that leads to a change in the composition of matter.
2. In the equation, CO₂ is a___reactant_____.
3. In the equation, C₆H₁₂0₆ is a ___product________.
4. In O₂, the type of bond that holds the two oxygen atoms together is a_nonpolar_covalent bond_________.
5. In H₂O, the type of bond that holds one of the hydrogen atoms to the oxygen atom is a__polar_hydrogen bond____.
6. The number of oxygen atoms on the left side of the equation is__equal to_________ the number of oxygen atoms on the right side.
How can a new element be made?
Answer:
adding or removing protons
Explanation:
Elements are defined by the number of protons they have. If you add or subtract protons then that changes and makes a new element.
Answer:
by changing the number of protons in the nucleus
Point P(-4, 0) lies on the directed line segment AE. The endpoints are A(2,-6)
and E(x, y). What are the coordinates of point E such that AP is 3/4 of the
distance from A to E?
Answer: (10,-14) I think
Explanation:
what are different type of plastids explain them?
Answer:
Explanation:
There are 3 types of plastids :-
1) Chloroplasts:- The green plastids which contain chlorophyll pigments for photosynthesis.
2) Chromoplasts:-The coloured plastids for pigment synthesis and storage.
3) Leucoplasts:- The colourless plastids for monoterpene synthesis found in non- photosynthetic parts of the plants.
They are of three types:-
a) Amyloplasts- stores starch.
b) Proteinoplasts- stores proteins.
c) Elaioplasts- stores fats and oils.
A small rock with the mass of 6 g is dropped into a graduated cylinder with 20 mL of water. The water rises to 23 mL. What is the density of the rock?
Answer: The density of the rock is 2g/mL. Hope this helped! :)
Explanation:
V= 3.0mL D=M/V
M= 6.0g
D=6.0g/3.0mL
D= 2.0g/mL
Differences between non-biodegradable and biodegradable.
Answer:
(simple differences)Biodegradable substances are those that degrades or break down naturally...
Non-biodegradable substances are those that do not degrades easily...
Answer:
Biodegradable substances are those that degrades or break down naturally
Non-biodegradable substances are those that do not degrades easily
List 3 common examples of physical changes
Answer: crushing a can, boiling water, breaking a glass
Explanation:
Calculate the mass of a liquid with density of 3.20 g/mL and volume of 15.0 mL.
Answer:
mass = 48 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
Density = 3.20 g/mL
volume = 15.0 mL
Substitute the values into the above formula and solve for the mass
That's
mass = 3.20 × 15
We have the final answer as
mass = 48 gHope this helps you
A jogger runs 10 km East. She then stops and heads back west for 6 km. What is the jogger's distance? What is the jogger's displacement?
Answer:
distance is 16m
displacement 4m east
How does scientists benefit society
Answer:
scientists benefit the society because they prove many theories, plus they are always finding new solutions to new things
Explanation:
Answer:
The scientist uses specialized training to help solve problems
faced by society.
Explanation:
A P E X
Which statement best compares and contrasts two physical properties of matter?
Answer:
Answer would be that boiling points and melting points are similar because they both involve the change in a state of a material, but they are different because boiling point involves a change from a liquid to a gas and melting point involves a change from a solid to a liquid. Boiling and melting are phase changes that can happen to a substance however they differ in the process that happens.
Explanation:
Two physical properties of matter can be best compared as boiling points and melting points are similar because both involve the change in a state of matter. But they are different because melting point involves a change from a solid to a liquid and boiling point involves a change from a liquid to a gas.
What are the boiling point and melting point?A boiling point of a liquid can be described as the temperature at which the vapour pressure is equal to the atmospheric pressure of the liquid. The liquid is changed into a vapour at this temperature.
With the addition of heat, the liquid will change into vapour without any increase in temperature. The vapour pressure of the gas increases until it is equal to the pressure of the gas surrounding it. Bubbles are formed within the liquid and rise to the surface.
The melting point of a substance can be described as the temperature at which it transforms the state from solid to liquid. At the melting point, the solid phases and liquid phases exist in equilibrium. The melting point depends on pressure and is generally specified at a standard pressure such as 1 atmosphere.
Learn more about melting and boiling point, here:
https://brainly.com/question/25777663
#SPJ6
Your question is incomplete, but most probably complete question was,
Which statement best compares and contrasts two physical properties of matter?
A) Density and solubility are similar because they both involve water, but they are different because density involves dissolving a material and solubility involves floating or sinking a material. Density and solubility are similar because they both involve a material’s mass and volume, but they are different because density involves floating materials and solubility involves sinking materials.
B) Boiling points and melting points are similar because they both involve changing the heat of a material, but they are different because boiling point involves adding heat to a material and melting point involves removing heat from a material. Boiling points and melting points are similar because they both involve the change in a state of a material, but they are different because boiling point involves a change from a liquid to a gas and melting point involves a change from a solid to a liquid.
2)
A barbecue is being planned for 175 people. The ice cream sandwiches for desert cost $1.68 per dozen. It is
assumed that the average number of sandwiches eaten per person will be 1.25. What will it cost to buy ice cream
sandwiches for the barbecue. Solve the problem by dimensional analysis.
Dimensional analysis is the unitary method that is used to determine the values by multiplication. The cost of the ice cream sandwiches for the barbecue is 367.5 $.
What is dimensional analysis?Dimensional analysis has been defined in maths, physics, and chemistry to solve the problem by multiplying the given numbers to determine the values of the other data. It uses the base quantities to estimate the derived values.
Given,
Number of people at barbecue = 175
Cost of ice cream sandwiches = $1.68 per dozen
The average number of sandwiches per person = 1.25
The cost to buy ice cream sandwiches for the barbecue is estimated by the dimensional analysis as:
12 ice cream sandwiches = $1.68
1.25 ice cream sandwiches = $2.1
If it costs $2.1 for each person then 175 people costs:
$2.1 × 175 = $367.5
Therefore, it will cost 367.5 $ for the barbecue.
Learn more about dimensional analysis, here:
https://brainly.com/question/13078117
#SPJ2
Which of the following is a true statement? Smashing an object into many pieces changes its chemical composition. Smashing an object into many pieces is a chemical change. Smashing an object into many pieces does not change the object. Smashing an object into many pieces is a physical change.
Answer:smashing an object into many pieces is a physical change
Explanation:
becauseee i’m not sure i’m getting points
Answer:
smashing an object into many pieces is a physical change
Explanation:
Which of the following is a lanthanide
A. Gold (Au)
B. Americium (Am)
C. Barium (Ba)
D. Europium (Eu)
Answer:
Hope it helps.
Explanation:
The lanthanide (/ˈlænθənaɪd/) or lanthanoid (/ˈlænθənɔɪd/) series of chemical elements[1] comprises the 15 metallic chemical elements with atomic numbers 57–71, from lanthanum through lutetium.[2][3][4] These elements, along with the chemically similar elements scandium and yttrium, are often collectively known as the rare earth elements.
The informal chemical symbol Ln is used in general discussions of lanthanide chemistry to refer to any lanthanide. All but one of the lanthanides are f-block elements, corresponding to the filling of the 4f electron shell; depending on the source, either lanthanum or lutetium is considered a d-block element, but is included due to its chemical similarities with the other 14.[5] All lanthanide elements form trivalent cations, Ln3+, whose chemistry is largely determined by the ionic radius, which decreases steadily from lanthanum to lutetium.
They are called lanthanides because the elements in the series are chemically similar to lanthanum. Both lanthanum and lutetium have been labeled as group 3 elements, because they have a single valence electron in the 5d shell. However, both elements are often included in discussions of the chemistry of lanthanide elements. Lanthanum is the more often omitted of the two, because its placement as a group 3 element is somewhat more common in texts and for semantic reasons: since "lanthanide" means "like lanthanum", it has been argued that lanthanum cannot logically be a lanthanide, but IUPAC acknowledges its inclusion based on common usage.[6]
In presentations of the periodic table, the lanthanides and the actinides are customarily shown as two additional rows below the main body of the table,[2] with placeholders or else a selected single element of each series (either lanthanum and actinium, or lutetium and lawrencium) shown in a single cell of the main table, between barium and hafnium, and radium and rutherfordium, respectively. This convention is entirely a matter of aesthetics and formatting practicality; a rarely used wide-formatted periodic table inserts the lanthanide and actinide series in their proper places, as parts of the table's sixth and seventh rows (periods).
The 1985 International Union of Pure and Applied Chemistry “Red Book” (p. 45) recommends that "lanthanoid" is used rather than "lanthanide". The ending “-ide” normally indicates a negative ion. However, owing to wide current use, “lanthanide” is still allowed.
Answer:
D. Europium
Explanation:
I got this as a correct answer on apex
85g=kg?
Unit conversion.
Answer:
0.085 kg
Explanation:
1 g=0.001 kg OR 1 kg=1000 g
so [tex]\frac{85}{1000}[/tex]=0.085 kg
Which statement best describes a physical property of copper
Answer:A physical property is one that can be changed without altering the identity of a substance. These set of properties is not concentration dependent. They are used to describe matter. Examples are density, solubility, melting point, color and odor. For this case, the second option seems to fit the description. It can be reshaped by a force.
Explanation:
she adds 1.5 mL, 0.75 mL, and 1.2 mL. Her measurements of the oil are blank
Answer:
The total measurements of the oil is 3.45mL
Explanation:
Given
1.5 mL, 0.75 mL, and 1.2 mL.
Required
Determine the total
To get the total, we simply add the given volumes together.
[tex]Total = 1.5 mL+ 0.75 mL + 1.2 mL[/tex]
[tex]Total = 3.45mL[/tex]
Hence;
The total measurements of the oil is 3.45mL
Consider the orbitals shown below
Which of these diagrams correctly shows the electron configuration for the atom with one more electron than the one shown above?
Answer:b
Explanation:
The option that correctly shows the electron configuration for the atom with one more electron than the one shown above would be the second diagram.
According to Hund's rule, electrons are distributed into empty orbitals singly before pairing can start.
Following the rule:
diagram 1 is incorrect because the first 3p orbital is already paired while the third one remains empty.diagram 3 is incorrect because the orientation of the electron in the third p orbital is wrongdiagram 4 is incorrect because the first 3p orbital already has 2 electrons (with a disoriented one) while the third 3p orbital remains empty.The only diagram that follows Hund's rule is diagram 2.
More on Hund's rule can be found here: https://brainly.com/question/11653230
A single atom of an element has 11 protons, 11 electrons, and 12 neutrons. Which element is it? a V b Na c Mg d Se
Answer:
B. Na
Explanation:
To identify an atom, you simply need to look at the number of protons. This atom has 11 protons. On the periodic table, you can see that the element with 11 protons is sodium (Na).
Dependent variable definition
Answer:
The dependent variable is the variable being tested and measured in an experiment, and is 'dependent' on the independent variable.
Answer:
variable whose value depends on that of another Explanation:
The emission spectrum for an element is? Select all that apply
Answer: You didn't give anything to select, however, the emission spectrum of a chemical element is frequencies of electromagnetic radiation emitted due to an atom or molecule making a transition from a high energy state to a lower energy state.
what is the difference between genetic and other causes of health conditions
Answer:
Explanation: The main difference between Genetic and Hereditary Diseases is that genetic disease is a condition which occurs due to an abnormality in the individual’s genome while a hereditary disease is a condition caused by a mutation of a gene which can be characteristically transmitted from one generation to another, also The main difference between these two terms lies in the fact that hereditary diseases have the potential of being carried from one generation to another whereas a genetic disease can either be hereditary or not, but there will always be a mutational change in the genome.
In a desert ecosystem, coyotes and rattlesnakes both eat the same type of mouse as a primary part of their diets. Recently, coyotes have been hunted and killed by people, decreasing the overall coyote population.
Answer:
there primary food source will still be the same
Explanation:
they will still ear mice but coyotesmay eat Humans if they are close because once they see humans they think they will be killed its there protectiong
Answer:
D. It will increase because coyotes are the competition.
Explanation:
Because Competition is When 2 organisms fight for the same thing, and sense rattlesnakes are the other competition they will increase because coyotes are being killed.
A liquid that can absorb and release huge amounts of heat energy without much change in the overall temperature of the water has what
A Has a high density capacity
B Has a high surface tension capacity
C Has a high specific leat capacity
D Has a high non-polar capacity
Answer:
Im pretty sure the answers b
Explanation:
Because if its talking about overall tempature the it means ihas tension with high surface.
The nucleus of a helium atom is identical to: A) a gamma particle B) an alpha particle C) a beta particle D) all of the above
Answer: D. All of the above
Answer:
B. Alpha Particles
Explanation:
P: Have a Nice Day!