Find the mass and show all the work please and show the answer. Thank you.

Answer:

721 kg/m^3

Explanation:

Trust me bro

Answer:

3072J

Explanation:

At all points through her slide, it is important to reiterate that energy is always conserved.

Kinetic energy is the energy due to the motion of a body.

Potential energy is the energy due to the position of a body.

Based on the law of conservation of energy, energy is neither created nor destroyed but simply transformed from one form to another.

 So;

At all points:

           Total energy  = Potential energy + Kinetic energy

Since the initial energy  = 5000J which is the potential energy

This is the total energy within the system as the kinetic energy at this point is 0;

 After a few seconds, the potential energy is 1928J;

  Kinetic energy  = Total energy  - potential energy  = 5000J  - 1928J

  Kinetic energy  = 3072J

Answer:

When the liquid moves through the hydrosphere, the water collects into a cloud. When it falls to the earth, turning into snow and sleet collecting in rivers and lakes.

Explanation:

Hope that helps

Answer:

The frozen part of the hydrosphere has its own name, the cryosphere. Water moves through the hydrosphere in a cycle. Water collects in clouds, then falls to Earth in the form of rain or snow. This water collects in rivers, lakes and oceans.

Answer:

0kgm/s

Explanation:

The momentum of the empty car is zero.

Momentum is the quantity of motion a body possess. The more the mass and velocity by which a body moves, the higher is its momentum.

 Momentum  = mass x velocity

Since the second car is at rest, the velocity is 0m/s;

 So;

     Momentum  = 100 x 0 = 0kgm/s

Therefore, a body at rest has zero momentum

Answer:

Antinode

Explanation:

The antinode is a point along the wave that has the greatest maximum velocity in the y-direction.

Answer: Your right its ( The pressure of the substance)

Explanation: MArk me as brainlisti

Answer:

The color of the substance.

Explanation:

The color. (I think, it should be right because color shouldn't affect it.)

Answer:

noble gases is those group of elements that DO NOT form ions and are found as monatomic atoms in nature .

The only group of elements that DO NOT form ions and are found as monatomic atoms in nature are the: noble gases.

The noble gases are a group of chemical elements with comparable qualities; under normal conditions, they are all odourless, colourless, monatomic gases with very minimal chemical reactivity. Historically, they were also known as inert gases and aerogens. Helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radioactive radon are the six naturally occurring noble gases (Rn).

Oganesson (Og) is a highly radioactive element created synthetically. Although the IUPAC has included oganesson since "group 18" and "noble gas" have been used interchangeably, oganesson may not be appreciably chemically noble and is projected to deviate from the norm and be reactive due to relativistic effects. Its chemistry has not yet been studied due to the single known isotope's relatively brief 0.7 ms half-life.

Hear more about noble gas here:

https://brainly.com/question/11414033

#SPJ2

Answer:

financial aid

Explanation:

edge

Answer:

5 miles per hour

Explanation:

if you divide 15 by 3 you get 5, therefore the student is going 5 miles per hour.

Answer:

What happens to the wavelength of a wave if you double the frequency?

If the frequency of a wave is increased, what happens to its wavelength? As the frequency increases, the wavelength decreases. 2. If the frequency is doubled, the wavelength is only half as long.

Explanation:

Answer:

(A) We are using them faster than they are replenished by nature

Answer:

Gases and particles in Earth's atmosphere scatter sunlight in all directions. Blue light is scattered more than other colors because it travels as shorter, smaller waves. This is why we see a blue sky most of the time.

Explanation:

Sorry if it's not that simple ;v;

ThE sKy Is BlUe BeCaUsE yEs.

Answer:

Boiling point

Explanation:

Answer:

what?

Explanation:

Answer:

600m/s²

Explanation:

Given parameters:

Mass of car  = 600kg

Impulse  = 18000kgm/s

Time  = 0.05s

Unknown:

Acceleration  = ?

Solution:

To solve this problem, let us find the force that cause the impact first;

          Impulse  = Force x time

          Force  = [tex]\frac{impulse}{time}[/tex]    = [tex]\frac{18000}{0.05}[/tex]    = 360000N

So;

        Force   = mass x acceleration

         Acceleration  = [tex]\frac{Force }{mass}[/tex]    = [tex]\frac{360000}{600}[/tex]    

         Acceleration  = 600m/s²

Answer:

The resistance is 0.617Ω.

Explanation:

Given that the formulas are V = I × R and P = I × V so when you substitute the V formula into P formula, you will get P = I² × R. Using this formula, you can find the resistance :

P = I² × R

50 = 9² × R

50 = 81 R

50 ÷ 81 = R

R = 0.617Ω (3sf)

Answer:

Wind

Explanation:

Answer:

Electric field lines are an excellent way of visualizing electric field. Electrical lines of force can be described as a way or path, it can be straight or curved so that the tangent gives the direction of the intensity of the electric field at that point at any point.

Answer:

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Explanation:[tex]A \ frictionless \ pulley, \ whic h\ can \ be \ modeled \ as \ a \ 0.83 k g \ solid \ cylinder \ with \ a \ 0.30 \ m \ radius,[/tex]  [tex]\ has \ a \ rope \ going \ over \ it[/tex] [tex]The \ tensions \ in \ the \ rope \ are \[/tex] [tex]12 n \ and \ 10 n . \ What \ is \ the \ angular \ acceleration \ of \ the \ pulley?[/tex]

[tex]From \ the \ given \ information:[/tex]

[tex]The \ moment \ of \ inerti a \ of \ a \ solid \ cylinder[/tex] [tex]I = \dfrac{1}{2}mr^2[/tex]

[tex]I = \dfrac{1}{2}(0.83)(0.3)^2[/tex]

[tex]I = 0.03735 \ kg \ m^2[/tex]

[tex]The \ net \ torque = F_1(r) - F_2(r) \\ \\ = 12(0.3) - 10(0.3) \\ \\ = 0.6 \ N.m[/tex]

[tex]Torque (T) = moment \ of \inertia (I) \times angular \ acceleration ( \alpha)[/tex]

[tex]\alpha = \dfrac{T}{I}[/tex]

[tex]\alpha = \dfrac{0.6 \ Nm}{0.03735 \ kg \ m^2}[/tex]

[tex]\mathbf{\alpha = 16.06 \ rad/s^2}[/tex]

Answer: ethanol which will dissolve in both water (a polar solvent) and gasoline (a non-polar solvent)

Explanation:

According to the concept of solubility, ethanol is a molecule which is soluble in both polar and non-polar solvents.

Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.

The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.

Learn more about solubility,here:

https://brainly.com/question/3479494

#SPJ5

Answer:

[tex]\boxed {\boxed {\sf a= -17.9 \ m/s^2}}[/tex]

Explanation:

Acceleration is equal to the change in velocity over the change in time.

[tex]a=\frac{v_f-v_i}{t}[/tex]

The initial velocity is 35.8 meters per second. The final velocity is 0 meters per second when the car comes to a complete stop. The time is 2.0 seconds.

[tex]v_f= 0 \ m/s \\v_i= 35.8 \ m/s \\t= 2 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{0 \ m/s - 35.8 \ m/s }{2 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{ -35.8 \ m/s} {2 \ s}[/tex]

Divide.

[tex]a= -17.9 \ m/s/s = -17.9 \ m/s^2[/tex]

The car's acceleration is -17.9 meters per square second. The acceleration is negative because the car was coming to a stop and slowing down.

Answer:

1. KE = ½mv²

2. The kinetic energy of the tennis ball is 0.725 J

Explanation:

The following data were obtained from the question:

Mass (m) = 0.058 kg

Velocity (v) = 5.0 m/s

Kinetic energy (KE) =.?

1. Defining an expression which relates kinetic energy, mass and speed of an object.

Kinetic energy is simply defined as the energy possess by an object in motion. Mathematically, kinetic energy can be represented as:

KE = ½mv²

Where

KE => is the kinetic energy.

m => is the mass of the object.

v => is the velocity of the object.

2. Determination of the kinetic energy of the tennis ball.

Mass (m) = 0.058 kg

Velocity (v) = 5.0 m/s

Kinetic energy (KE) =.?

KE = ½mv²

KE = ½ × 0.058 × 5²

KE = 0.029 × 25

KE = 0.725 J

Thus, the kinetic energy of the tennis ball is 0.725 J.

Answer:

500.3 Bq

Explanation:

From the formula;

0.693/t1/2 = 2.303/t log (Ao/A)

Where;

t1/12 = half life = 5 years

Ao = initial activity = 2000 Bq

0.693/5 = 2.303/10 log (2000/A)

0.1386= 0.2303  log (2000/A)

0.1386/0.2303 =  log (2000/A)

0.6018 = log (2000/A)

(2000/A) = Antilog (0.6018)

(2000/A) = 3.9976

A = 2000/3.9976

A = 500.3 Bq

Answer:

C,B,A

Explanation:

Answer:

first one C

second one B

third one A

Explanation:

i hope you have a good day ;0

4.02 m/sec² is the acceleration of a 10 kg block that experiences a 50 N applied force as it slides across a horizontal surface.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

force = 50 N - frictional force = ma

50 - 9.8 = ma

a = 40.2/10

a = 4.02 m/sec²

4.02 m/sec² is the acceleration of a 10 kg block that experiences a 50 N applied force as it slides across a horizontal surface.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ2

Answer:

51.85m/s

Explanation:

Given parameters:

Mass of ball  = 0.0459kg

Force  = 2380N

Time taken  = 0.001s

Unknown:

Speed of the ball afterwards  = ?

Solution:

To solve this problem, we use Newton's second law of motion:

   F = m x [tex]\frac{v - u}{t}[/tex]  

F is the force

m is the mass

v is the final velocity

u is the initial velocity

t is the time taken

        2380  = 0.0459 x [tex]\frac{v- 0}{0.001}[/tex]  

        0.0459v  = 2.38

                   v = 51.85m/s

Answer:

2.38

Explanation:

F = dp/dt  --> dp = F*dt ---> p = F*t if F is constant over time so

p = 2380N* 0.001 s = 2.38 kg-m/s

Answer:

Infrared, Visible light, UV light, X-ray, gamma

Explanation: