Find the critical numbers of the function. (Enter your answers as a comma-separated list. If an answer does not exist, enter DNE.)
g(x) =
3^ 64 − x2
cubed root of 64-x^2

Answers

Answer 1

To find the critical numbers of the function g(x), we need to first find its derivative and then set the derivative equal to zero to solve for x.

The function is given as: g(x) = (64 - x^2)^(1/3)

To find the derivative, we will use the chain rule, which states that the derivative of a composite function is the derivative of the outer function times the derivative of the inner function.

So: g'(x) = (1/3)(64 - x^2)^(-2/3) * (-2x)

Now, we need to set g'(x) = 0 to find the critical numbers:

0 = (1/3)(64 - x^2)^(-2/3) * (-2x)

To solve for x, we can observe that if either of the factors is equal to 0, then the equation will hold.

So, let's examine each factor: (1/3)(64 - x^2)^(-2/3) = 0:

This factor can never be zero, because a nonzero number raised to any power is never zero. -2x = 0: This factor is zero when x = 0.

So, the only critical number for the function g(x) is x = 0. The final answer is: 0

Know more about chain rule,

https://brainly.com/question/30895266

#SPJ11

Answer 2

To find the critical numbers of the function g(x), we need to first find its derivative and then set the derivative equal to zero to solve for x.

The function is given as: g(x) = (64 - x^2)^(1/3)

To find the derivative, we will use the chain rule, which states that the derivative of a composite function is the derivative of the outer function times the derivative of the inner function.

So: g'(x) = (1/3)(64 - x^2)^(-2/3) * (-2x)

Now, we need to set g'(x) = 0 to find the critical numbers:

0 = (1/3)(64 - x^2)^(-2/3) * (-2x)

To solve for x, we can observe that if either of the factors is equal to 0, then the equation will hold.

So, let's examine each factor: (1/3)(64 - x^2)^(-2/3) = 0:

This factor can never be zero, because a nonzero number raised to any power is never zero. -2x = 0: This factor is zero when x = 0.

So, the only critical number for the function g(x) is x = 0. The final answer is: 0

Know more about chain rule,

https://brainly.com/question/30895266

#SPJ11


Related Questions

f(x) = (x + 5)²
Which type of function is shown?
O Linear function
Quadratic function
Square-root function
O Exponential function

Answers

Answer:

Quadratic Function

Step-by-step explanation:

f(x) is a quadratic function because when distributed you get:

[tex]x^2+10x+25[/tex].  A quadratic function is a polynomial with a degree (power) of two or more.

The other options are eliminated because:

A linear function has a variable with a power of 1 or no variable at all.

A square-root function has a leading variable with a power of 1/2.

An exponential function has a term to the power of a variable.

Use the recipe card for 7-8.

7. Paul has 3 cups of water. Is this enough water to make 3 batches of green slime for a class project? Explain.

8. There are 16 tablespoons in 1 cup. How many tablespoons of cornstarch would Paul need to make 7 batches of

4

green slime?

Answers

Using the recipe card, Paul would need to make 7 batches of green slime, we again need the recipe card information.

To answer this question, we need to refer to the recipe card for making green slime.

According to the recipe card, we need 1 cup of water for each batch of green slime.

Paul has 3 cups of water, which means he can make 3 batches of green slime.

So, the answer to the first part of the question is yes, Paul has enough water to make 3 batches of green slime.
Moving on to the second part of the question, we need to find out how many tablespoons of cornstarch Paul would need to make 7 batches of green slime.

According to the recipe card, we need 2 tablespoons of cornstarch for each batch of green slime.

So, to make 7 batches, we need to multiply 2 tablespoons by 7 batches, which gives us 14 tablespoons.
Now, we also know that there are 16 tablespoons in 1 cup.

Therefore, to convert 14 tablespoons into cups, we need to divide it by 16. Doing so, we get 0.875 cups.

So, to make 7 batches of green slime Paul would need 0.875 cups of cornstarch.
In conclusion,

Paul has enough water to make 3 batches of green slime and he would need 0.875 cups (or 14 tablespoons) of cornstarch to make 7 batches of green slime.

For similar question on recipe card:

https://brainly.com/question/15567668

#SPJ11

Type the correct answer in the box. Use numerals instead of words. If necessary, use / for the fraction bar and ^ to indicate an exponent.
Find the product.

5^56x5^22x5^-96= ______

Answers

The product of the expression is determined using rules of exponent as 5⁻¹⁸.

What is the product of the expression?

The product of the expression is calculated by applying the rules of exponent as shown below;

5⁵⁶ x 5²² x 5⁻⁹⁶

Based on rules of exponent;

multiplication sign = implies addition

So we are going to add all the powers of 5 as follows;

5⁵⁶ x 5²² x 5⁻⁹⁶ = 5⁵⁶ ⁺ ²² ⁻ ⁹⁶

= 5⁵⁶ ⁺ ²² ⁻ ⁹⁶

= 5⁻¹⁸

Learn more about exponents here: https://brainly.com/question/11975096

#SPJ1

Find the surface area.
12 cm
16 cm
20 cm
4 cm​

Answers

Answer:

12cm+16cm+20cm+4cm

=52cm

Step-by-step explanation:

we find the area of each face and add them together.

The answer to your question is 52 cm

find the value of t0.010t0.010 for a tt-distribution with 2626 degrees of freedom. round your answer to three decimal places, if necessary.

Answers

The value of t0.010 for a t-distribution with 26 degrees of freedom is 2.779. The critical t-value corresponding to a probability level of 0.010 and 26 degrees of freedom is approximately 2.779.

To find the value of t0.010 for a t-distribution with 26 degrees of freedom, follow these steps:
1. Identify the given information: We are given the probability level (0.010) and the degrees of freedom (26).
2. Consult a t-distribution table or use a calculator/software to find the critical value. Since t-distribution tables may not provide an exact value for every probability level, you may need to interpolate between the closest values given.
3. In this case, using a t-distribution table or software, we find that the critical t-value corresponding to a probability level of 0.010 and 26 degrees of freedom is approximately 2.779.
4. Round the answer to three decimal places, if necessary: The value is already rounded to three decimal places, so our final answer is 2.779.
Therefore, the value of t0.010 for a t-distribution with 26 degrees of freedom is 2.779.

To find the value of t0.010 for a t-distribution with 26 degrees of freedom, we can use a t-distribution table or a calculator that has a t-distribution function. From the table, we can look for the row that corresponds to 26 degrees of freedom and the column that corresponds to the 0.010 significance level. The intersection of the row and column will give us the value of t0.010. Alternatively, we can use a calculator to find the value of t0.010 using the t-distribution function. Assuming that the question meant to ask about a t-distribution with 26 degrees of freedom, and not 2626 degrees of freedom, we can find the value of t0.010 to be approximately -2.478, rounded to three decimal places. This means that the probability of getting a t-value less than -2.478 or greater than 2.478 is 0.010 or 1%.
It is important to note that the use of decimal places in rounding the answer depends on the level of precision required in the context of the problem.

Learn more about probability here: brainly.com/question/30034780

#SPJ11

vconsider the parametric curve given by x=cos(2t),y=5cos(t),0 (a) Find dy/dr and d^2y/dx^2 in terms of t. Dy/dx=__________
D^2/dx^2=__________
(b) Using "less than" and "greater than" notation, list the t-interval where the curve is concave upward. Use upper-case "INF" for positive infinity and upper-case "NINF" for negative infinity. If he curve is never concave upward, type an upper- case "N" in the answer field.
t-interva _____

Answers

The t-interval where the curve is concave upward is:

(a) To find dy/dr, we use the chain rule:

dy/dt = dy/dx * dx/dt

dy/dt = (dy/dt)/(dx/dt) [using the reciprocal rule]

Now, we can find dy/dx using the given parametric equations:

dy/dx = (dy/dt)/(dx/dt) = [5(-sin(t))]/[-2sin(2t)]

Simplifying the expression, we get:

dy/dx = -5/2cos(t)

To find d^2y/dx^2, we use the quotient rule:

d^2y/dx^2 = [(d/dt)(-5/2cos(t))(2cos(2t)) - (-5/2sin(t))(-4sin(2t))]/[-2sin(2t)]^2

Simplifying the expression, we get:

d^2y/dx^2 = -5/2cos(3t)

(b) To find where the curve is concave upward, we need to find where d^2y/dx^2 is positive. We know that cos(3t) is positive when 0 < t < 2π/3 and 4π/3 < t < 2π. Therefore, the t-interval where the curve is concave upward is:

(0, 2π/3) U (4π/3, 2π)

To learn more about expression, visit: https://brainly.com/question/14083225

#SPJ11

Is it acute, right , or obtuse ??

Answers

Answer:

3. Right 4. Obtuse

Step-by-step explanation:

3. A^2 + B^2 = C^2, therefore the triangle is right

4. A^2+B^2 < C^2: therefore the triangle is obtuse.

Use the direct comparison test to determine whether the following series converge or diverge. A. X [infinity] n=2 7 n2 + √ n − 2 B. X [infinity] n=1 1 7n − 3 C. X [infinity] n=3 1 n3/2 ln2 (n) D. X [infinity] n=1 sin2 (n) n2 + 5 E. X [infinity] n=1 cos(1/n) √ n

Answers

The following parts can be answered by the concept of Converges.

A. For the series Σ(7n² + √n - 2) from n=2 to infinity, we compare it to the series Σ(7n²) which diverges since it's a polynomial with a positive degree. Therefore, the original series also diverges.

B. For the series Σ(1/(7n-3)) from n=1 to infinity, we compare it to the series Σ(1/n) which is a harmonic series and diverges. Since 1/(7n-3) ≥ 1/(7n), the original series also diverges.

C. For the series Σ(1/(n^(3/2) × ln²(n))) from n=3 to infinity, we compare it to the series Σ(1/(n^(3/2))). The p-series with p = 3/2 converges (p > 1). Since ln²(n) grows slower than n^(3/2), the original series converges.

D. For the series Σ(sin²(n)/(n² + 5)) from n=1 to infinity, we compare it to the series Σ(1/n²). The p-series with p = 2 converges (p > 1). Since 0 ≤ sin²(n) ≤ 1, the original series converges by direct comparison test.

E. For the series Σ(cos(1/n) / √n) from n=1 to infinity, we compare it to the series Σ(1/√n). The p-series with p = 1/2 diverges (p ≤ 1). Since -1 ≤ cos(1/n) ≤ 1, the original series also diverges by direct comparison test.

To learn more about Converges here:

brainly.com/question/15415793#

#SPJ11

Which statement is true of data in a line graph
more than one answer

A. It is discrete.

B. It is given in data pairs.

C. It is continuous.

D. It can only have certain values.

Answers

Answer:

The answer to your problem is, C. It is continuous

( I saw that there is more than one answer than the other answer is D. )

Step-by-step explanation:

What a line graph is:

A line graph displays data that continuously changes over a period of time. It can be obtained from bar graphs and histograms ( every histogram is a bar graph ) by joining the mid-point of the top edges of every bar. This makes the analysis easier.

If you look in economic terms ( shown in picture ) everybody uses line graphs from small business owners to the president.

Thus the answer to your problem is, C. It is continuous

Picture of line graph used in economic terms. \/

all rectangles have 2 pairs of parallel sides. all squares are rectangles with 4 congruent sides.
part 1:
do all squares have 2 pairs of parallel sides? use the statement from above to help you explain your answer

part 2:
do all rectangles have 4 congruent sides? use the statements from above to help you explain your answer

Answers

Part 1: Yes, all squares have 2 pairs of parallel sides.

Part 2: No, not all rectangles have 4 congruent sides.

Part 1: This is because all squares are rectangles, and all rectangles have 2 pairs of parallel sides. Additionally, since all four sides of a square are congruent, this means that the two pairs of sides are also congruent, making them parallel.

Part 2: While all squares are rectangles with 4 congruent sides, rectangles can have two pairs of parallel sides that are not congruent. For example, a rectangle with a length of 5 units and a width of 3 units has two pairs of parallel sides, but they are not congruent.

One pair of sides is longer than the other pair. Therefore, the fact that all squares are rectangles with 4 congruent sides does not mean that all rectangles have 4 congruent sides.

To learn more about rectangles click on,

https://brainly.com/question/23925195

#SPJ1

Select the correct answer from each drop-down menu.
The table shows the hourly cookie sales by students in grades 7 and 8 at the school's annual bake sale.

Grade 7 Grade 8
20 21
15 29
30 14
24 19
18 24
21 25
The interquartile range for the grade 7 data is

The interquartile range for the grade 8 data is

The difference of the medians of the two data sets is

The difference is about
times the interquartile range of either data set.
Reset Next

Answers

The interquartile range for the grade 7 data is 9 (30 – 21).

The interquartile range for the grade 8 data is 10 (29 – 19).

The difference of the medians of the two data sets is 6 (21 – 15).

The difference is about 0.67 times the interquartile range of either data set.

What is  interquartile range?

It is a measure of the spread of numerical data, which is calculated by subtracting the third quartile (Q3) from the first quartile (Q1). It is used to measure the variability of a data set and is a good indicator of the outliers in the data set.

In the table given, the interquartile range of grade 7 data is 9 and the interquartile range of grade 8 data is 10.

The difference of the medians of the two data sets is 6.

This difference is about 0.67 times the interquartile range of either data set.

This shows that the variability between the two data sets is not significantly different, as the difference between their medians is only two thirds of the IQR of either data set. Thus, the two data sets are relatively similar in terms of their variability.

For more questions related to variability

https://brainly.com/question/12872866

#SPJ1

PQRS is a rhombus. Find each measure.
QP____. QRP_____

Answers

The measure of the side QP and the angle m∠QRP for the rhombus PQRS are 42 and 51° respectively

What is a rhombus

A rhombus is a two-dimensional geometric shape with four equal sides and four equal angles, but the angles are not necessarily 90 degrees. It is a type of parallelogram.

QP = QR = RS = SP

4a - 14 = 3a

4a - 3a = 14 {collect like terms}

a = 14

QP = 3 × 14

QP = 42

2(m∠P) + 2(78) = 360° {sum of interior angles of a quadrilateral}

m∠P = 102°

m∠QRP = 102°/2

m∠QRP = 51°

Therefore, the measure of the side QP and the angle m∠QRP for the rhombus PQRS are 42 and 51° respectively

Read more about rhombus here:https://brainly.com/question/20627264

#SPJ1

Aria is going to invest $23,000 and leave it in an account for 20 years. Assuming the interest is compounded quarterly, what interest rate, to the nearest hundredth of a percent, would be required in order for Aria to end up with $68,000?

Answers

When the interest is compounded quarterly the interest rate would be 7.26%  in order for Aria to end up with $68,000.

To solve the question :

The formula for compound interest :

A = P(1 + r/n)^(nt)

Where,

A = Amount,

P = Principal,

R = Annual interest rate,

n = Number of times the interest is compounded per year, and

t = time (years)

Given,

A = $68,000,

P = $23,000,

n = 4 ( as the interest is being compounded quarterly), and

t = 20.

Solving for r :

$68,000 = [tex]$23,000 ( 1+\frac{r}{4} )^{4 * 20}[/tex]

Divide both sides by $23,000 and take the 20th root of both sides,

we get :

[tex](1+\frac{r}{4}) ^{80}[/tex] = 2.9565

Take the natural log of both sides,

we get :

80 ln[tex](1 + \frac{r}{4} )[/tex] = ln (2.9565)

Divide both sides by 80,

we get:

ln [tex](1 + \frac{r}{4} )[/tex] = ln [tex]\frac{ (2.9565)}{80}[/tex]

Take the exponential of both sides,

we get:

1 + r/4 = e^(ln(2.9565)/80)

Subtract 1 from both sides and multiply by 4,

we get:

r = 7.26%

Hence, r =  7.26%.

To know more about, compound interest, visit :

https://brainly.com/question/14295570

A BVP for the Heat Equation.
Consider the following boundary value problem modeling heat flow in a wire.
(PDE) / =2(^2/x^2) , for 00
(BC) x (0,) =0, (/2,) =0, >0
Use the method of separation of variables to derive the infinite series solution for (x,).

Answers

The infinite series solution to the boundary value problem is:

[tex](x,t) = \sum Bn sin(n\pi x / 2) e^{(-(n\pi/2)}^2 t)[/tex]

How to find the infinite series solution for (x)?

Using the method of separation of variables to derive the infinite series solution for (x). We begin by assuming a separable solution of the form:

(x,t) = X(x)T(t)

Substituting this into the heat equation, we get:

X(x)T'(t) =[tex]2 T(t) (X''(x)/X(x)^2)[/tex]

Dividing both sides by X(x)T(t), we get:

T'(t)/T(t) =[tex]2 X''(x)/X(x)^2[/tex] = -λ

where λ is a constant. This gives us two separate ODEs:

T'(t) + λ T(t) = 0 with boundary conditions T(0) = 0 and T(/2) = 0

and

X''(x) + λ X(x) = 0 with boundary conditions X(0) = 0 and X'(/2) = 0

Solving the first ODE for T(t), we get:

[tex]T(t) = c1 cos(\sqrt(\lambda) t) + c2 sin(\sqrt(\lambda) t)[/tex]

Applying the boundary conditions, we get:

T(0) = 0 => c1 = 0

T(/2) = 0 => c2 [tex]sin(\sqrt(\lambda) (/2))[/tex] = 0

Since [tex]sin(\sqrt(\lambda) (/2))[/tex] ≠ 0, this implies that c2 = 0. Therefore, T(t) = 0, which means that λ must be negative. Let λ =[tex]-p^2[/tex], where p > 0. Then the second ODE becomes:

X''(x) + [tex]p^2[/tex] X(x) = 0 with boundary conditions X(0) = 0 and X'(/2) = 0

The general solution to this ODE is:

X(x) = c3 cos(px) + c4 sin(px)

Applying the boundary conditions, we get:

X(0) = 0 => c3 = 0

X'(/2) = 0 => c4 p cos(p/2) = 0

Since cos(p/2) ≠ 0, this implies that c4 = 0. Therefore, X(x) = 0, which is not a useful solution. To obtain non-trivial solutions, we must have the condition:

p tan(p/2) = 0

This condition has infinitely many solutions, given by:

p = nπ, n = 1, 2, 3, ...

Therefore, the solutions to the ODE are:

Xn(x) = sin(nπ x / 2)

with eigenvalues:

[tex]\lambda n = -(n\pi/2)^2[/tex]

The general solution to the heat equation is then:

[tex](x,t) = \sum Bn sin(n\pi x / 2) e^{(-(n\pi/2)^2 t)}[/tex]

where the coefficients Bn are determined by the initial condition.

This series solution satisfies the boundary conditions, and it can be shown to satisfy the heat equation.

Therefore, the infinite series solution to the boundary value problem is:

[tex](x,t) = \sum Bn sin(n\pi x / 2) e^{(-(n\pi/2)}^2 t)[/tex]

where Bn are constants determined by the initial condition.

Learn more about variable separation method

brainly.com/question/30656387

#SPJ11

we have f '(x) = 2 cos x − 2 sin x, so

Answers

We have f '(x) = 2 cos x − 2 sin x, so f"(x) = -2 sin(x) – 2 cos(x) which equals 0 when tan(x) = -1 . Hence, in the interval [tex]0\leq x\leq 2\pi[/tex], f"(x) = 0 when X = [tex]\frac{3\pi }{4}[/tex] and x = [tex]\frac{7\pi }{4}[/tex]

To find when f"(x) = 0 with the given f"(x) = -2 sin(x) - 2 cos(x), we need to solve the equation:
-2 sin(x) - 2 cos(x) = 0
First, divide both sides of the equation by -2 to simplify:
sin(x) + cos(x) = 0
Now, we want to find when tan(x) is equal to a certain value. Recall that tan(x) = sin(x) / cos(x). To do this, we can rearrange the equation:
sin(x) = -cos(x)
Then, divide both sides by cos(x):
sin(x) / cos(x) = -1
Now, we have:
tan(x) = -1
In the given interval 0 ≤ x ≤ 2π, tan(x) = -1 at:
x = 3π/4 and x = 7π/4.
So, in the interval 0 ≤ x ≤ 2π, f"(x) = 0 when x = 3π/4 and x = 7π/4.

The complete question is:-

we have f '(x) = 2 cos x − 2 sin x, so f"(x) = -2 sin(x) – 2 cos(x) which equals 0 when tan(x) = __ . Hence, in the interval [tex]0\leq x\leq 2\pi[/tex], f"(x) = 0 when X = [tex]\frac{3\pi }{4}[/tex] and x = [tex]\frac{7\pi }{4}[/tex]

To learn more about interval, refer:-

https://brainly.com/question/13708942

#SPJ11

Mason had 20 dollars to spend on 3 gifts. He spent 8 7/ 10 dollars on gift A and 6 2/5 dollars on gift b. How much money did he have left for gift c?

Answers

Answer:

$4.9 or 4 9/10

Step-by-step explanation:

Gift A - $87/10 - $8.7

Gift B - $32/5 - %6.4

Gift C = ?

Total Amount = $20

Gift C = 20 - (Gift A + Gift B)

= 20 - (8.7 + 6.4)

= 20 - 15.1

= 4.9

Money Left for Gift C = $4.9 or 4 9/10

60 + 15 using the distributive property with the greatest common factor located in front of the parentheses

Answers

Answer:

The greatest common factor of 60 and 15 is 15. Therefore, we can use the distributive property with 15 located in front of the parentheses as follows:

60 + 15 = 15 x 4 + 15 x 1

= 15(4 + 1)

= 15 x 5

= 75

Therefore, 60 + 15 = 75 using the distributive property with the greatest common factor located in front of the parentheses.

Problem 7Letq=a/b and r=c/d be two rational numbers written in lowest terms. Let s=q+r and s=e/f be written in lowest terms. Assume that s is not 0.Prove or disprove the following two statements
.a. If b and d are odd, then f is odd.
b. If b and d are even, then f is even
Please write neatly. NOCURSIVE OR SCRIBBLES

Answers

a.

If [tex]b[/tex] and [tex]d[/tex] are odd, then [tex]f[/tex] is odd:


We know that  [tex]q[/tex] and  [tex]r[/tex] are in the lowest terms, which means that  [tex]b[/tex] and  [tex]d[/tex] do not have any common factors other than [tex]1[/tex]. Thus, the denominator of  [tex]s,f[/tex] is the least common multiple of  [tex]b[/tex] and  [tex]d[/tex], which is also in the lowest terms.


Let's assume that  [tex]b[/tex] and  [tex]d[/tex] are odd, then we can write them as  [tex]b=2k+1[/tex] and  [tex]d=2m+1[/tex] for some integers  [tex]k[/tex] and  [tex]m[/tex]. So, [tex]s=q+r=\frac{a}{b} +\frac{c}{d} =\frac{(ad+bc)}{bd}[/tex]c)/bd


Now, let's look at the numerator of [tex]s: ad+bc[/tex]. Since [tex]b[/tex] and [tex]d[/tex] are odd, then 2 divides neither of them. Therefore, the product [tex]bd[/tex] is odd.

Now, we have two cases:

If [tex]a[/tex] and [tex]c[/tex] are both odd, then their product [tex]ac[/tex] is odd. Adding two odd numbers gives an even number. So, [tex](ad+bc)[/tex] is even. If one of [tex]a[/tex] and [tex]c[/tex] is even and the other is odd, then their product [tex]ac[/tex] is even. Adding an odd number and an even number gives an odd number. So, ad+bc is odd.


Therefore, [tex]ad+bc[/tex] is odd or even depending on the parity of [tex]a[/tex] and [tex]c[/tex]. Now, let's look at the denominator of [tex]s, bd[/tex].

We know that [tex]b=2k+1[/tex] and[tex]d=2m+1.[/tex] So, [tex]bd=(2k+1)(2m+1)\\ =4km+2k+2m+1\\=2(2km+k+m)+1[/tex], which is odd. Thus, [tex]f[/tex] is odd, which proves the statement.

b. If [tex]b[/tex] and [tex]d[/tex] are even, then [tex]f[/tex] is even:


Again, we know that [tex]q[/tex] and [tex]r[/tex] are in lowest terms, which means that [tex]b[/tex] and [tex]d[/tex] do not have any common factors other than [tex]1[/tex]. Thus, the denominator of [tex]s, f[/tex], is the least common multiple of [tex]b[/tex] and [tex]d[/tex], which is also in the lowest terms.


Let's assume that [tex]b[/tex] and [tex]d[/tex] are even, then we can write them as [tex]b=2k[/tex] and [tex]d=2m[/tex] for some integers [tex]k[/tex] and [tex]m[/tex]. So, [tex]s=q+r= \frac{a}{b}+\frac{c}{d}=\frac{(ad+bc)}{bd}[/tex]


Now, let's look at the numerator of [tex]s: ad+bc[/tex]. Since [tex]b[/tex] and [tex]d[/tex] are even, then 2 divides both of them. Therefore, the product [tex]bd[/tex] is even. Now, we have two cases:

If [tex]a[/tex] and [tex]c[/tex] are both odd, then their product [tex]ac[/tex] is odd. Adding two odd numbers gives an even number. So, [tex](ad+bc)[/tex] is even.- If one of [tex]a[/tex] and [tex]c[/tex] is even and the other is odd, then their product [tex]ac[/tex] is even. Adding an odd number and an even number gives an odd number. So, [tex](ad+bc)[/tex] is odd.

Therefore, [tex](ad+bc)[/tex] is odd or even depending on the parity of [tex]a[/tex] and [tex]c[/tex]. Now, let's look at the denominator of [tex]s, bd[/tex]. We know that [tex]b=2k[/tex]and [tex]d=2m[/tex]. So, [tex]bd=2k*2m=4km[/tex], which is even. Thus,[tex]f[/tex] is even, which proves the statement.

Therefore, both statements are true.

Know more about Rational Number here:

https://brainly.com/question/24398433

#SPJ11

In 2011, 17 percent of a random sample of 200 adults in the United States indicated that they consumed at least 3 pounds of bacon that year. In 2016, 25 percent of a random sample of 600 adults in the United States indicated that they consumed at least 3 pounds of bacon that year

Answers

A suitable test statistic to evaluate the variation in bacon consumption from 2011 to 2016 would be a test for two proportions and the null hypothesis.

The test's null hypothesis states that the proportion of adults who ate at least three pounds of bacon in 2011 is identical to that number in 2016.

The difference between the proportion of adults who consumed at least 3 pounds of bacon in 2011 and 2016 could be one possible cause.

The p-value of the test statistic must be calculated in order to determine whether or not the null hypothesis can be ideally rejected because it is comparable to a chi-squared distribution with one degree of freedom.

For similar question on Null hypothesis.

https://brainly.com/question/4436370

#SPJ11

Question:-

In 2011, 17 percent of a random sample of 200 adults in the United States indicated that they consumed at least 3 pounds of bacon that year. In 2016, 25 percent of a random sample of 600 adults in the United States indicated that they consumed at least 3 pounds of bacon that year.  Assuming all conditions for inference are met which is the most appropriate test statistic to determine variation of bacon consumption from 2011 to 2016 ?

use the integral test to determine whether the series is convergent or divergent. [infinity] 6 5 n n = 1 evaluate the following integral. [infinity] 1 6 5 x dx

Answers

To use the integral test, we need to evaluate the following integral: ∫[infinity]1 6/5x dx Using integration by substitution with u = 6/5x, we get: ∫[infinity]1 6/5x dx = (5/6)∫[infinity]6/5 1 du.

Evaluating this integral gives us: (5/6)∫[infinity]6/5 1 du = (5/6)(1/u)|[infinity]6/5 = (5/6)(0 - 5/6) = -25/36 Since the integral evaluates to a finite value, and the series has the same general term as the function being integrated, we can conclude that the series is convergent by the integral test.

The new limits for the integral will be 5 (lower) and infinity (upper). ∫(5 to infinity) 6/u * (1/5) du. Thus, the integral is divergent. Since the integral is divergent, the original series Σ (n = 1 to infinity) 6/(5n) is also divergent.

To know more about function click here

brainly.com/question/28193995

#SPJ11

Let m, n ∈ Z where m 6= 0 and n 6= 0. Define a set of integers L as follows:
• Base cases: m, n ∈ L
• Constructor cases: If j, k ∈ L, then 1. −j ∈ L 22. j + k ∈ L
Prove by structural induction that every common divisor of m and n also divides every member of L

Answers

We will prove by structural induction that every common divisor of m and n also divides every member of the set L.By structural induction, we have shown that every common divisor of m and n also divides every member of the set L.

• Base cases: m, n ∈ L

• Constructor cases: If j, k ∈ L, then 1. −j ∈ L 2. j + k ∈ L

Base case:

For m and n, let d be a common divisor of m and n. Since d divides both m and n, it follows that d also divides m + n and m - n (by adding and subtracting the two equations following structural induction). Therefore, d is a divisor of both m and n, as well as of j and k in the base cases of L.

Constructor case 1:

Suppose that −j ∈ L and d is a common divisor of m and n. Then, −j = −1 * j and since d is a divisor of j, it follows that d is also a divisor of −j.

Constructor case 2:

Suppose that j + k ∈ L and d is a common divisor of m and n. Then, d divides both j and k, and therefore d divides (j + k).

To learn more about structural induction, visit here

https://brainly.com/question/15077663

#SPJ4

A force of 800 N is applied to a beam at a point 1.5 meters to the left of the point B. F=800 N 0 B 1.5 m a. What does 1.5 m measure? The distance between the pivot and the force. The distance between the origin and the force. The length of the beam. The moment of the force about the pivot. The moment of the force about the origin. The force on the beam. b. What does 800 N measure? The distance between the pivot and the force. The distance between the origin and the force. The length of the beam The moment of the force about the pivot. The moment of the force about the origin.The force on the beam c. Compute the moment about B. MB =

Answers

a) 1.5 m measure the distance between the pivot and the force. Correct option is A

b) 800 N measure the force on the beam. Correct option is F.

c) The moment about B is 1200 Nm.

a. The distance of 1.5 meters measures the distance between the force and the pivot. Therefore, the correct answer is A) The distance between the pivot and the force.

b. 800 N measures the force applied to the beam. Therefore, the correct answer is F) The force on the beam.

c. To compute the moment about B, we need to use the formula:

MB = F × d

where F is the force applied to the beam and d is the perpendicular distance from the pivot point to the line of action of the force.

In this case, F = 800 N and d = 1.5 m. Therefore,

MB = 800 N × 1.5 m = 1200 Nm.

To learn more about force click on,

https://brainly.com/question/26707130

#SPJ4

Given right triangle ABC with altitude BD drawn to hypotenuse AC. If BD = 6 and DC 2, what is the length of AD?​

Answers

Answer:

2√10

Step-by-step explanation:

when trangle ABC is drawn and then you insert ur altitude BD which is a straight line , and u then join it to c. This will form a rectangle. When that rectangle is formed you can use the available adjacent and opp which is now 6 and 2. Use this to find your hypoteneuse. Formula is x^2 + y^2 = z^2. and ur answer will be √40 which is equivalent to 2√10

what t score would you use to make a 86onfidence interval with 15 data points (assuming normality)?

Answers

To make an 86% confidence interval with 15 data points (assuming normality), we would use a t-score of 1.341.

To find the t-score for an 86% confidence interval with 15 data points, we need to find the value of t such that the area under the t-distribution curve between t and -t (i.e., the area of the central region containing 86% of the probability mass) is equal to 0.86.

Since we have a small sample size (n=15), we need to use a t-distribution instead of a standard normal distribution. The degrees of freedom for the t-distribution is (n-1) = 14.

Using a t-distribution table or calculator, we can find that the t-score for a two-tailed test with a 86% confidence level and 14 degrees of freedom is approximately 1.341.

Therefore, to make an 86% confidence interval with 15 data points (assuming normality), we would use a t-score of 1.341.

To learn more about confidence interval visit: https://brainly.com/question/24131141

#SPJ11

F(1) = -3 f(n)= -5 x f(n-1) evaluate sequences in recursive form (khan academy)

Answers

To evaluate the sequence in recursive form, we can use the given recursive formula:

f(n) = -5 x f(n-1)

We are also given the initial value:

f(1) = -3

Using these, we can find the first few terms of the sequence:

f(1) = -3

f(2) = -5 x f(1) = -5 x (-3) = 15

f(3) = -5 x f(2) = -5 x 15 = -75

f(4) = -5 x f(3) = -5 x (-75) = 375

f(5) = -5 x f(4) = -5 x 375 = -1875

So the first few terms of the sequence are: -3, 15, -75, 375, -1875, ...

Note that this sequence is decreasing in magnitude and alternating in sign, since each term is multiplied by -5.

Solve the given system of differential equations by systematic elimination. Dx/dt = 6x 10y Dy/dt = x − 3y

(x(t), y(t)) =

Answers

The solution of the differential equation is :

x(t) = (Dx/dt - 10y) / 6
y(t) = (Dx/dt - 6(Dy/dt)) / 28

To solve the given system of differential equations by systematic elimination, we have:

Dx/dt = 6x + 10y
Dy/dt = x - 3y

Step 1: Solve the first equation for x:
Dx/dt = 6x + 10y
x = (Dx/dt - 10y) / 6

Step 2: Substitute this expression for x into the second equation:
Dy/dt = ((Dx/dt - 10y) / 6) - 3y

Step 3: Solve the second equation for y:
Dy/dt = (Dx/dt - 10y) / 6 - 3y
6(Dy/dt) = Dx/dt - 10y - 18y
6(Dy/dt) = Dx/dt - 28y
y = (Dx/dt - 6(Dy/dt)) / 28

Step 4: Use the expressions for x and y to find the solution (x(t), y(t)).

x(t) = (Dx/dt - 10y) / 6
y(t) = (Dx/dt - 6(Dy/dt)) / 28

These are the solutions for the given system of differential equations by systematic elimination.

To know more about differential equation click on below link:

https://brainly.com/question/31583235#

#SPJ11

The equation of the sphere with two end points on its diameter (0, 2, 5) and (4, 6, 9 is given by a.(x - 2)2+(-4)2+(2-7)2 = 12 b.(x - 2)2 + (-4)2 + (z - 7)2 = 9 c.(x-4)2 + (y-2)2+(2-2)2 = 12 d.(x-4)2 + (y - 2)2 + (2-2)2 = 9 e.(x - 2)2 + (y-2)2 + (z - 4)2 = 12

Answers

Comparing with the given options, we can see that the correct answer is (e):[tex](x - 2)^2 + (y - 2)^2 + (z - 4)^2 = 12[/tex]. We can use the midpoint formula to find the center of the sphere:

Midpoint Formula = [tex]([(0+4)/2], [(2+6)/2], [(5+9)/2])[/tex] [tex]= (2, 4, 7)[/tex]

The radius of the sphere can be found by finding the distance between the center and one of the endpoints:

r = [tex]\sqrt{((4-2)^2 + (6-4)^2 + (9-7)^2)}[/tex] = [tex]\sqrt{(8+4+4) }[/tex]= [tex]\sqrt{16}[/tex] = [tex]4[/tex]

So, the equation of the sphere is:[tex](x - 2)^2 + (y - 4)^2 + (z - 7)^2 = 16[/tex]

Expanding the equation, we get:[tex]x^2 - 4x + 4 + y^2 - 8y + 16 + z^2 - 14z + 49 = 16[/tex]

Simplifying, we get:[tex]x^2 - 4x + y^2 - 8y + z^2 - 14z + 53 = 0[/tex]

To learn more about midpoint formula, visit here

https://brainly.com/question/30242630

#SPJ4

Which expression has a value that is greater than 42.537?
A.(4x10)+(2x1)+(5x1/10)+9x1/100)+(3x1/1000)
B.(4x10)+(1x1)+(6x1/10)+(2x1/100)+(5x1/1000)
C.(4x10)+(2x1)+(5x1/10)+(3x1/100+(7x1/1000)
D.(4x10)+(2x1)+(5x1/10)+(1x100)+(9x1/1000)

Answers

Answer:

A

Step-by-step explanation:

find the matrix a of the linear transformation t from r2 to r2 that rotates any vector through an angle of 30∘ in the counterclockwise direction. a= [ ] .

Answers

The matrix A of the linear transformation t that rotates any vector through an angle of 30 degrees counterclockwise can be found using the standard rotation matrix formula.

A = [cosθ -sinθ; sinθ cosθ]

where θ is the angle of rotation in radians.

Converting 30 degrees to radians gives θ = π/6, so we can substitute this value into the formula to get:

A = [cos(π/6) -sin(π/6); sin(π/6) cos(π/6)]

Simplifying this, we get:

A = [√3/2 -1/2; 1/2 √3/2]

So the matrix A of the linear transformation t that rotates any vector through an angle of 30 degrees counterclockwise is:

A = [√3/2 -1/2; 1/2 √3/2]

This matrix can be used to rotate any vector in R2 by multiplying it with matrix A. The resulting vector will be the original vector rotated counterclockwise by 30 degrees.

In other words, if v is a vector in R2, then the rotated vector r can be found as:

r = Av

where A is the rotation matrix we found above.

To learn more about linear transformation, visit:

https://brainly.com/question/1599831

#SPJ11

constant sum scales produce ratio scale data. true false

Answers

False. Constant sum scales produce interval scale data, not ratio scale data. In constant sum scales, respondents allocate a fixed number of points among a set of attributes, reflecting their relative importance.

This results in interval scale data where the differences between points are meaningful, but there is no true zero point or absolute zero, which is a key characteristic of ratio scale data.

A ratio scale is a type of measurement scale that has an absolute zero point, meaning that there is a true zero point on the scale that indicates the absence of the attribute being measured. For example, weight and height are ratio scales, where zero weight or height indicates a complete absence of the attribute being measured.

On the other hand, constant sum scales are a type of scale that requires respondents to allocate a fixed total amount among several attributes or options based on their perceived importance or value. This type of scale does not have an absolute zero point, and the scores are not based on the actual quantity of the attribute being measured. For example, constant sum scales are commonly used in marketing research to measure the relative importance of product features or benefits.

As such, constant sum scales do not produce ratio scale data. Instead, they produce interval scale data, where the scores are based on the relative distances between the values on the scale, but there is no true zero point.

Understanding the properties of different measurement scales is important for selecting the appropriate scale for a particular research question and for interpreting and analyzing the data collected using the scale.

To learn more about “distance” refer to the https://brainly.com/question/26550516

#SPJ11

Other Questions
11. explain the observed temperature change in terms of heat being lost or gained by the system or surroundings. Write an expression equivalent to 3(x-10). Although qualitative research design is emergent, advance planning is needed for which purpose? A. Deciding how large the sample will be B. Identifying personal biases and presuppositions C. Deciding which instruments and scales will be used to collect data D. Developing a coding scheme for the data f a producer increases the amount of labor used in production, holding other inputs constant, thentotal product will always increase at an increasing rate.total product will decrease at a decreasing rate.total product will continue to increase at a constant rate.total product will eventually increase at a decreasing rate. Consider the circuit in Figure 2 where v_i (t) is a co-sinusoidal input with some radian frequency .(a) What is the phasor gain va/vi in the circuit as 0? (Hint: How does one model a capacitor at DC open or short?) (b) What is the gain va//vi as ? (Hint: think of capacitor behavior in [infinity] limit) (c) In view of the answers to part (a) and (b), and the fact that the circuit is 2nd order (it contains two energy storage elements), try to guess what kind of a filter the system frequency response HW) = implements - lowpass, highpass, or bandpass? The amplitude response |H()| of the circuit will be measured in the lab. If a company is operating at full capacity, the incremental costs of a special order will likely include fixed manufacturing costs. A. True B. False For each of the following solutions, calculate the initial pH and the final pH after adding 0.010 mol of NaOH.For 300.0mL of pure water, calculate the initial pH and the final pH after adding 0.010 mol of NaOH.For 300.0mL of a buffer solution that is 0.240M in HCHO2 and 0.280M in KCHO2, calculate the initial pH and the final pHafter adding 0.010 mol of NaOH.For 300.0mL of a buffer solution that is 0.305M in CH3CH2NH2 and 0.285M in CH3CH2NH3Cl, calculate the initial pHand the final pH after adding 0.010 mol of NaOH. C&A produces three kinds of bread: wheat, white, and multigrain. The data on these products are given below:Wheat White MultigrainDemand (lbs per hour) 50 20 10Changeover time (min) 60 30 45Production rate (lbs per hour) 200 200 200How many pounds of wheat bread should C&A produce with each batch in order to minimize inventory while satisfying demand? the range of the cost driver in which the actual value of the cost driver is expected to fall is called the: 1. An acrobat is on a platform that is 25 feet in the air. She jumps downat an initial vertical velocity of 4 ft/s. Write a quadratic function torepresent the height h of the acrobat t seconds after the jump.If a safety net is placed 5 feet above the ground, how long will it takefor her to land safely on the net? A machine that cost $170,000 has an estimated residual value of $17,000 and an estimated useful life of four years. The company uses double-declining-balance depreciation. Calculate its book value at the end of year 3. (Do not round intermediate calculations.) Other things being constant, what will be the effect of on consumption (consumption line) when the number of liquid assets consumers is holding increases? In Part 4 the indicator methyl orange is used and is ___ in acidic solutions below pH 3.2, it is ___ in solutions above pH 4.4 and is orange in between. a. red, yellow b. yellow, red c. orange, oranged. blue, red In the video, Fostering Self-Esteem: The Hazards of Pride, experimental participants with inflated levels of self-esteem are shown reacting to an experimental partner who was critical of their essays with aggression disgust. O jealousy. fear. what is the total cost of 4 units? select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a 220 b 240 c 260 d 280 The Member receives an email notification when their case is closed. 0.50 A solenoid has n = 1000 turns per meter and a volume of V = --m. If the rate of change of the current is i(t) = b cos(t) and b=2.0 A what is the maximum EMF that is induced? O 2.0V O 0.40V O 0.20V O 0.80V O 4.0V Save for Later Submit Answer Solve3 (6 +0.5 - 1.47) consist of price, delivery arrangements, payment terms, discounts and tax exemptions; should be negotiated to make sure agreements are metTerms of PurchaseDelivery ArrangementsPayment Terms Financial leverage will ________ shareholders' expected return and ________ shareholders' risk.a. increase; do nothing tob. decrease; increasec. increase; decreased. increase; increase