Find the concentration of sulfuric acid in mol/dm3 and g/dm3 given
that 25.0 cm3 of this solution reacts with 26.5 cm3 0.100 mol/dm3
sodium hydroxide solution in a titration

H2SO4 + 2NaOH → Na2SO4 + 2H2O

The temperature at which a liquid's vapour pressure equals the pressure around it and the liquid transforms into a vapour is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.

A liquid partially vaporises into the space above it at any temperature up until the vapour pressure of the liquid at that temperature, which is a characteristic value. When a liquid reaches its boiling point, vapour bubbles form inside the liquid and rise to the surface as the temperature rises, increasing the vapour pressure.

Learn more about a boiling point, Visit;

https://brainly.com/question/14771622

#SPJ13

Answer:

By combining two or more substances, a mixture is produced. A homogeneous solution tends to be identical, no matter how you sample it. Homogeneous mixtures are sources of water, saline solution, some alloys, and bitumen. Sand, oil and water, and chicken noodle soup are examples of heterogeneous mixtures.

Explanation:

Matter exists in different states such as solid, liquid and gas because of the kinetic energy of its particles and the intermolecular force of attraction between the particles.

A substance won't condense into a liquid or solid if the average kinetic energy is higher than the attraction forces holding the particles together.

Thus in solids, intermolecular force of attraction > kinetic energy of particles.

In a liquid (or solid), the average kinetic energy of the particles is low enough to allow the forces of attraction to hold the particles together. In a liquid (or solid), molecules do not separate.

In liquids,  intermolecular force of attraction > kinetic energy of particles. But this force of attraction is smaller than solids.

The forces of attraction between the particles in a gas can be overcome by the average kinetic energy of the particles in the gas. When gas molecules collide, they spread apart.

In gas, intermolecular force of attraction < kinetic energy of particles.

To know more about states of matter visit the link:

https://brainly.com/question/9402776?referrer=searchResults

#SPJ1

Anatomist and physiologist Theodor Schwann is best known for formulating the cell doctrine, which holds that all living things are made up of cells.

Theodor Schwann put forth the classical cell theory in 1839. This theory consists of three parts. All organisms are composed of cells, according to the first section. The basic building blocks of life exists cells, according to the second section.

Anatomist and physiologist Theodor Schwann is best known for formulating the cell doctrine, which holds that all living things are made up of cells. He proved that the cell is the fundamental building block of all living things.

All known living things are composed of one or more cells, according to the modern cell theory. By dividing, pre-existing cells become all living cells. All living things have cells as their basic unit of structure and operation.

Therefore, the correct answer is option d) Theodor Schwann did experimentation that demonstrated new cells come from existing, living cells.

To learn more about Theodor Schwann cell theory refer to:

https://brainly.com/question/13158035

#SPJ4

Density = Mass/Volume

Density (of the unknown metal) = 180/20

Answer: 9 grams/mL

The element which an alien with ten mouths need is Tungsten ( W ).

Tungsten is an element in the periodic table which belongs to group vi. It is a transition metal. Transition metals has the ability to form complex ions. Alien such as those with ten mouths need tungsten for sustenance.

An element is a substance which cannot be split into smaller forms by ordinary process. The element in the periodic table are structured into groups and periods. The vertical arrangements of chemical elements in the periodic table is the group while the period is the horizontal arrangements.

Chemical elements are also classified as metals, nonmetals and metalloids.

So therefore, tungsten is needed by aliens.

Read more on elements:

https://brainly.com/question/17912035

#SPJ1

The largest change in freezing point will be achieved when the solvent is  tert-butanol, and Kf = 9.1.

What is freezing point?

The temperature at which a liquid turns into a solid is known as the freezing point. Similar to the melting point, the freezing point typically rises with increasing pressure. In the case of combinations and for some organic substances, such as lipids, the freezing point is lower than the melting point.

Concept of colligative property is applied here.

In this case, particularly freezing point depression.

The formula is for this is:

[tex]\delta T = K_f \times m \times i[/tex]

When we add particles of a certain solute, freezing point of a solution becomes lower than the pure solvent.

i = Van't Hoff factor (ions particles that are dissolved in the solution)

In this case, the solute is nonvolatile, so i values 1.

δT = Difference between  fusion T° of pure solvent - fusion T° of solution.

T° fusion paradichlorobenzene = 56 °C

T° fusion water = 0°

T° fusion tert-butanol = 25°

Water has the lowest fusion temperature and the paradichlorobenzene has the highest Kf. But the the tert-butanol, has the highest Kf so this solvent will have the largest change in freezing point, when all the concentrations are the same.

To know more about freezing point, go to link

https://brainly.com/question/28032179

#SPJ9

During chemiosmosis, hydrogen ions accumulate in the ATP  formation of the mitochondrion to create a large electrochemical gradient for aerobic cellular respiration.

To learn more about : aerobic respiration

Ref : https://brainly.com/question/11691469

#jsp2

We can see that the density of the water is less than the density of the saturated salt solution from the table shown above.

The term density is defined as the ratio of the mass to the volume of an object. In this case, we can see that we are trying to compare the density of water and the density of a salt solution. We have to recall that when we dissolve a solute in a solvent, the density of the solution would change to reflect that we no longer have a pure solvent.

This is because, the density of a substance is an intrinsic property thus it then depends on the nature of the substance and not on the amount of the substance.

Thus, we can see that when we dissolve the salt in the water, the density of the water is increased. Thus water has a density of 1 g/mL while a saturated salt solution has a density of 1.12 g/mL.

Learn more about density:https://brainly.com/question/15164682

#SPJ1

There are 115 protons in the element 115 and due to the large number of protons, the element does not exist in nature.

Also, the element can not be isolated in nature that is IUPAC had to require an independent confirmation of the element.

We know that the periodic table is an arrangement of the atoms in order of increasing atomic number. We know that the larger the atomic number of the element, the less likely that the element would be stable in nature. The element that have been named 115 is called Moscovium and was discovered in Moscow as a product of a radioactive experiment. The number of protons in element 115 is 115 protons

Generally, the element number 115 does not exist in nature because if the proton number in an element exceeds 82, the repulsion between the protons would make it almost impossible for the nucleus to be a stable nucleus.

The reason why IUPAC had to request an independent confirmation of the element is because it does not exist in nature.

Learn more about element 115:https://brainly.com/question/27914234

#SPJ1

The possible compositions of the liquid phases are: [tex]x_{1} =0.15[/tex] and  [tex]x_{2} =0.79[/tex], while those of vapor phases are: [tex]y_{1} =0.2[/tex] and  [tex]y_{2} =0.7[/tex]

The given binary mixture of ethanol and ethyl acetate at 100 kPa.

Given plot is temperature versus mole fraction (T-xy) at constant pressure 100 kPa.

In the given plot, the upper curve represents the dewpoint curve and lower curve represents bubble point curve.

At a given temperature 74 C, we can determine the mole fractions as follows:

1. We draw a horizontal lie from 74 °C mole fraction 0 to 1 and it touches lower curve at two points and upper curve at two points.

2. We also draw a vertical line from points where it touches the lower curve gives the composition of liquid and draw a vertical line from points where it touches the upper curve gives the vapor compositions.

From the plot given below, the compositions of liquid where the vertical line touches lower curve are: [tex]x_{1} =0.15[/tex] and [tex]x_{2} =0.79[/tex]

And those for vapor phases where the line touches the upper curve are:

[tex]y_{1} =0.2[/tex] and [tex]y_{2} =0.7[/tex]

Learn more about the chemical mixtures here:

https://brainly.com/question/17975594

#SPJ4

P is the symbol for the element phosphorous. It has an atomic mass of 30.974 and an atomic number of 15.

The chemical element phosphorus has the atomic number 15 and the letter P in its name. Phosphorus (P), a nonmetallic chemical element of the nitrogen family (Group 15 [Va] of the periodic table), is a colorless, semitransparent, soft, waxy solid that glows in the dark. It appears to exist in two main forms: white phosphorus and red phosphorus. However, due to its high reactivity, phosphorus is never found on Earth as a free element. Phosphorus is a nonmetallic allotrope element found in living things and phosphates. The red form of phosphorus is less reactive and harmless and is used in alloys, matches, and insecticides. Ordinary phosphorus is a poisonous, combustible, and phosphorescent white solid.

To know more about phosphorus, visit:

https://brainly.com/question/13173173

#SPJ9

Answer:

you wont ever get this one but ok

Explanation:

lol

Since the samples are all at room temperature, the substance which is most likely the most dense is: D. silver.

Density can be defined as a ratio of mass to the volume of a physical substance such as chlorine, oxygen, bromine, silver, etc.

Mathematically, the density of a physical substance can be calculated by using this formula:

D = M/V

Where:

At room temperature, the density of the given physical substances in an ascending order are as follows:

In this context, we can reasonably and logically deduce that silver is the most dense among the given physical substances.

Read more on density here: https://brainly.com/question/18008144

#SPJ1

Answer: Ionic Bond

Explanation: They form when the cation and the anion have opposite charges, and attract each other

Using particles that are intended to adhere to specific cells, injured cells can be treated directly. Early disease detection is made possible by this technique, which also causes less damage to the body's healthy cells.

What medical use do nanoparticles have?

Medicine can now be included in nanoparticles the size of viruses thanks to modern research. Because they can locate damaged cells with extreme precision and administer the medication there, nanoparticles are effective for drug delivery—the administration of the medication to the body.

In the body, nanoparticles are active The epidermis, lining of the lungs, or lining of the intestine are some of the exterior layers of the body through which nanoparticles can enter. The specific physical and chemical characteristics of the particle will determine how successfully they migrate from the outside to the inside

to learn more about nanoparticles refer to:

https://brainly.com/question/28817822

#SPJ13

The acid dissociation constant for butyric acid is 0.0000145, pH value of its 0.075 M solution will be 2.98, and the pH value of 0.075 M solution of sodium butyrate will be 8.86.

a) The negative logarithmic values of the acid dissociation constant (Ka) for the acid and the base dissociation constant for the conjugate base (Kb) are always 14 in total:

pKa (acid) + pKb (conjugate base) = 14 ⇒ pKa = 14 - pKb

pKa = 14 - 9.16

pKa = 4.84

This means that the Ka for butyric acid is:

[tex]K_{a} = 10^{-4.84} = 1.45 * 10^{-5}[/tex]

b) The expression for butyric acid (HA) acid dissociation constant will look like this:

[tex]K_{a} = \frac{[H^{+} ][A^{-} ]}{[HA]} = \frac{X^{2} }{0.0075 - X}[/tex]

When transformed, this expression gives us a quadratic equation:

X² + Ka * X - 0.075 * Ka = 0

With familiar Ka, when we solve for X, we get:

X = 0.0010356 M = [H+]

We can use this to calculate the pH value of the solution:

pH = -log[H+]

pH = -log0.0010356

pH = 2.98

c) The expression for butyrate basicity will look like this:

[tex]K_{b} = \frac{[OH^{-} ][HA ]}{[A^{-} ]} = \frac{X^{2} }{0.0075 - X}[/tex]

When transformed, this expression gives a quadratic equation:

X² + Kb * X - 0.075 * Kb = 0

With familiar Ka, when we solve for X, we get:

X = 0.0000072 M = [OH-]

pOH = -log[OH-]

pOH = -log0.0000072

pOH = 5.14

pH = 14 - pOH

pH = 14 - 5.14

pH = 8.86

You can learn more about the acid dissociation constant here:
brainly.com/question/4363472

#SPJ4

While heterogeneous matter (from the Greek hetero = different) suggests non-uniformity and discontinuity, homogeneous matter (from the Greek homo = same) can be thought of as being uniform and continuous.

Materials that are homogeneous lack borders, are uniform throughout, and have all of its component elements in the same state. Homogeneous mixtures also include air we and the water we drink from the faucet. Quality is related are also alluded to as solutions.

Whether a mixture is solid, liquid, or gaseous, homogeneous mixtures have the same ratios of their component parts throughout a particular sample. Its composition remains the same throughout. There is just one visible phase of substance in a homogeneous combination.

To know more about Homogeneous Matter visit:

https://brainly.com/question/772299

#SPJ10

Answer:

No, it cannot be accelerating.

Explanation:

The question explicitly states that the airplane is flying at a constant speed, meaning that its speed is not changing (not accelerating or decelerating).

Oxford Languages definition of constant:

a quantity or parameter that does not change its value whatever the value of the variables, under a given set of conditions.

Answer:

No, as acceleration means increasing speed but the airplane is flying with a constant speed which means there is no increase or decrease in speed

Pls mark as Brainliest

Answer:

5. F

6. H

7. E

8. B

9. G

10. D

Explanation:

Most of these could have just been looked up online or could've used context clues based on the name. If they are vocab words make sure to memorize them.

Answer:

actually it depends on when and on what you had the finger print it could stay a couple of days, weeks or months and still be considered fresh

Chemical decomposition, also known as chemical breakdown, refers to the process or effect of breaking down a single chemical entity (normal molecule, reaction intermediate, etc.) into two or more fragments. The chemical breakdown is commonly thought of and characterized as the inverse of chemical synthesis.

The mechanics of a decomposition process are not usually fully defined, although some of the processes are understood; breaking bonds requires a lot of energy. Because all decomposition processes break down the bonds that keep it together in order to produce simpler basic parts, the reactions would all require some form of this energy to varying degrees. As a result of this fundamental rule.

To learn more about decomposition reaction the given link:

brainly.com/question/8009068

#SPJ9

1. Atomic number is the relative atomic in an atom.

2. Mass number is the number of protons and neutrons in an atom

3. Isotopes are atoms with the atomic same but different mass due to the neutrons number of neutrons in the nucleus.

Atoms of many elements are in the form of molecules or ions because they are the most reactive. Examples are hydrogen oxygen chlorine and other elements. However non-reactive atoms of certain elements exist in nature in a free state. The relative atomic mass of an element is defined as the weight in grams of the number of atoms of that element in 12.00 grams of carbon-12.

The atomic mass of an element is the average mass of the atoms of the element measured in atomic mass units AMU, also known as Dalton D. Atomic mass is the weighted average of all isotopes of that element, the mass of each isotope multiplied by the abundance of that particular isotope. It is the ratio of the average atomic mass of the element from a single specific sample or source to the mass of the carbon-12 atom.

Learn more about The atomic mass here:-https://brainly.com/question/338808

#SPJ1

A bond between two atoms whose electronegativity values differ anywhere from 0.5 and 2.0 is called a polar covalent bond, whereas a bond between atoms whose electronegativities differ by 2.0 or more is considered an ionic nonpolar bond.

A covalent bond in which the atoms always have an unequal attraction for electrons which results in the unequal sharing of electron is a polar covalent bond.

If the difference in electronegativity is more than 1.7 or 2.0, ionic nonpolar bonds are formed as the ionic bonds are formed by the electron donation from the atom which is less electronegative to the atom which is more electronegative.

Electrons are shared in ionic and covalent bonds but differently.  Non-polar or polar covalent bonds can be formed and they can react to electrostatic charges.

Ionic bonds are formed due to electrostatic force between negative and positively charged ions, thus, electronegativity is more than 2.0.

To learn more about bonds,

brainly.com/question/15207647

#SPJ1

Answer:

producer and consumer

since the The caterpillar will later evolve and develop into a cocoon.

The cocoon will evolve into a butterfly and hence the organism will grow and develop.

Being a herbivorous animal the caterpillar represents consumer and plant is a producer.

The caterpillar also helps in rearing silk hence they are producers and consumers also

Answer:

a)3

b)6

d)24

option c

Granite has a specific heat of 800 J/g °C. the mass of granite is needed to store 150200 J from 30  °C to 75  °C is 4.17 g.

Given that :

specific heat of granite ( c ) = 800 J/g  °C.

Q store = 150,200 J

temperature T1 = 30  °C.

temperature T2 = 75  °C.

now, Q = mc (T2-T1 )

        150200 J = m × 800 J/g  °C ( 75  °C - 30  °C )

         m  =   150200 J/ 800 J/g  × 45

         m  =   150200 g / 36000

         m  =  4.17 g

Thus, Granite has a specific heat of 800 J/g °C. the mass of granite is needed to store 150200 J from 30  °C to 75  °C is 4.17 g.

To learn more about specific heat here

https://brainly.com/question/17403728

#SPJ1

The atomic theory describes Dalton's theory because electron, proton and neutron.

The first a part of his theory states that every one matter is product of atoms, which might be indivisible. The second one part of the concept says all atoms of a given element are equal in mass and houses. The  element says compounds are combos of two or extra distinctive forms of atoms.

One of the maximum essential merits of Dalton's atomic idea is the truth that the idea does no longer violate numerous fundamental laws of chemical combination consisting of the regulation of precise proportions, the regulation of multiple proportions, and the regulation of conservation of mass.

In 1803 Dalton located that oxygen mixed with both one or  volumes of nitric oxide in closed vessels over water and this pioneering remark of fundamental more than one proportions supplied vital experimental proof for his incipient atomic thoughts.

Learn more about Dalton's theory here:- https://brainly.com/question/13157325

#SPJ1