To find the area under the standard normal curve to the right of z = 1.72.
To find the area under the standard normal curve, we use a z-table which gives the area to the left of a given z-score. Since we need to find the area to the right of z = 1.72, we'll first find the area to the left and then subtract it from 1.
Step 1: Look up the z-score of 1.72 in a z-table. You'll find that the area to the left of z = 1.72 is approximately 0.9573.
Step 2: Subtract the area to the left from 1: 1 - 0.9573 = 0.0427.
So, the area under the standard normal curve to the right of z = 1.72 is approximately 0.0427, rounded to four decimal places.
https://brainly.com/question/31485575
#SPJ11
What is the angle of QRT?
In the above diagram the Side RT is aligning with the base of the protactor i.e. 0 degree, therefore measure of angle QRT is 130 degree.Hence Option C is correct.
What is angle?An angle is a geometric figure formed by two rays or line segments that share a common endpoint, called a vertex.
What is Protactor?A protractor is a measuring tool used to determine the angle between two lines or the angle of a geometric shape.
According to the given information :
In the above diagram the Side RT is aligning with the base of the protactor i.e. 0 degree, therefore we read the angle measurement where the other side intersects with the protractor's degree scale. Therefore, side QR is intersecting at 130 degree on protcator.
So measure of angle QRT is 130 degree.Hence Option C is correct.
To know more about angle and protactor visit :
https://brainly.com/question/12013461
#SPJ1
{xyz | x, z ∈ σ ∗ and y ∈ σ ∗ 1σ ∗ , where |x| = |z| ≥ |y|}
The expression {xyz | x, z ∈ σ ∗ and y ∈ σ ∗ 1σ ∗ , where |x| = |z| ≥ |y|} represents a set of strings that can be formed by concatenating three substrings: x, y, and z.
The strings in the set must satisfy the following conditions:
x and z are arbitrary strings over the alphabet σ (i.e., any set of symbols).y is a non-empty string over the alphabet σ, followed by a single symbol from the alphabet σ (i.e., any one symbol).The length of x and z must be the same (i.e., |x| = |z|), and must be greater than or equal to the length of y (i.e., |x| = |z| ≥ |y|).Intuitively, this set represents all the strings that can be formed by taking a "core" string of length |y| and adding some arbitrary strings before and after it to create a longer string of the same length. The single symbol at the end of y is meant to separate y from the rest of the string and ensure that y is not empty.
For example, if σ = {0, 1}, then one possible string in the set is "0011100", where x = "00", y = "111", and z = "00". This string satisfies the conditions because |x| = |z| = 2, |y| = 3, and y ends in the symbol "1" from σ. Other strings in the set could be "0000110", "1010101", or "1111000", depending on the choice of x, y, and z.
To learn more about Sets, visit:
https://brainly.com/question/25005086
#SPJ11
7) Winston needs at least 80 signatures from students in his school before he can run for class president. He has 23 signatures already. He and two of his friends plan to get the remaining signatures during lunch. If each person gets the same number of signatures, which inequality can Winston use to determine the minimum number of signatures each person should get so he can run for class president? A 3x+80223 B 3x+80 ≤23 C 3x+23280 D 3x+2380
If each person gets the same number of signatures, 3x+23 > 80 is the inequality can Winston use to determine the minimum number of signatures each person should get so he can run for class president.
Winston needs at least 80 number of signatures from students in his school before he can run for class president. He has 23 signatures already. He and two of his friends plan to get the remaining signatures during lunch
Winston needs at least 80 signatures. Let y be the number of signatures Winston manages to obtain. Then y > 80
He and 2 of his friends obtain number of signatures.
Then y = 3x + 23
Or, the required inequality is 3x + 23 > 80.
Correct option is (C).
Therefore, If each person gets the same number of signatures, 3x+23 > 80 is the inequality can Winston use to determine the minimum number of signatures each person should get so he can run for class president.
To know more about number check the below link:
https://brainly.com/question/30659330
#SPJ9
use two-point forward-difference formulas and backward-difference formulas as appropriate to determine each f'(x)
The forward-difference formula estimates the slope of the tangent line at x using f(x+h) and f(x), while the backward-difference formula uses f(x) and f(x-h).
The two-point forward-difference formula for approximating the derivative of a function f(x) at a point x is:
f'(x) = (f(x+h) - f(x))/h
where h is a small positive number. This formula estimates the slope of the tangent line to the function f(x) at x by taking the slope of the secant line between f(x) and f(x+h).
The two-point backward-difference formula for approximating the derivative of a function f(x) at a point x is:
f'(x) = (f(x) - f(x-h))/h
where h is a small positive number. This formula estimates the slope of the tangent line to the function f(x) at x by taking the slope of the secant line between f(x) and f(x-h).
To determine f'(x) using these formulas, we need to know the value of f(x) and the value(s) of f(x ± h), depending on which formula we are using. We can then plug these values into the appropriate formula and calculate an approximation of f'(x). These formulas are first-order approximations and the error in the approximation is proportional to h. Using smaller values of h will generally give more accurate approximations, but may also lead to numerical instability or round-off error.
To know more about the Difference, here
https://brainly.com/question/31013305
#SPJ4
Let f be the function given by f(x) = (x2 - 2x - 1)e". (a) Find lim f(x) and lim (x). lim fx=(18-21 li)=2" = 0 (b) Find the intervals on which is increasing Show the analysis that leads to your answer. (c) Find the intervals on which the graph off is concave downward. Show the analysis that leads to your answer. d) Sketch the graph off.
(a) negative infinity also approaches 0 because e^x becomes very large as x becomes very negative, (b) f(x) is increasing on the interval (1, infinity) and decreasing on the interval (-infinity, 1), (c) f(x) is concave downward on the interval (-infinity, 2) and concave upward on the interval (2, infinity) and (d) the graph approaches the x-axis as x approaches infinity and negative infinity.
(a) To find lim f(x) as x approaches infinity, we need to determine the growth rate of the term e^(-x). As x becomes very large, e^(-x) approaches 0 faster than any polynomial, so the exponential term dominates and the limit of f(x) approaches 0. Similarly, lim f(x) as x approaches negative infinity also approaches 0 because e^x becomes very large as x becomes very negative.(b) To find the intervals on which f(x) is increasing, we need to find the first derivative of f(x) and examine its sign.f'(x) = (2x-2)e^(-x), so f'(x) is positive for x > 1 and negative for x < 1. Therefore, f(x) is increasing on the interval (1, infinity) and decreasing on the interval (-infinity, 1).(c) To find the intervals on which the graph of f(x) is concave downward, we need to find the second derivative of f(x) and examine its sign.f''(x) = (4-2x)e^(-x), so f''(x) is negative for x < 2 and positive for x > 2. Therefore, f(x) is concave downward on the interval (-infinity, 2) and concave upward on the interval (2, infinity).(d) The graph of f(x) is shown below. It has a local maximum at x=1 and a point of inflection at x=2. The graph approaches the x-axis as x approaches infinity and negative infinity.For more such question on graph
https://brainly.com/question/26865
#SPJ11
How many milliliters of a sample would you need if you needed 9 million yeast cells to make bread? (You have a yeast concentration of 3 million yeast cells/ml). O 3 O 3 million yeast cells/ml O 3ml O 3 million
We would need 3 milliliters of the sample to have 9 million yeast cells for making bread.
To find out how many milliliters of a sample you would need to obtain 9 million yeast cells, given a yeast concentration of 3 million yeast cells/ml, you can follow these steps,
1. Determine the number of yeast cells needed: 9 million yeast cells.
2. Identify the yeast concentration: 3 million yeast cells/ml.
3. Divide the total number of yeast cells needed by the yeast concentration to find the required sample volume.
In this case,
(9 million yeast cells) / (3 million yeast cells/ml) = 3 ml
So, you would need 3 milliliters of the sample to have 9 million yeast cells for making bread.
Learn more about "sample": https://brainly.com/question/24466382
#SPJ11
We would need 3 milliliters of the sample to have 9 million yeast cells for making bread.
To find out how many milliliters of a sample you would need to obtain 9 million yeast cells, given a yeast concentration of 3 million yeast cells/ml, you can follow these steps,
1. Determine the number of yeast cells needed: 9 million yeast cells.
2. Identify the yeast concentration: 3 million yeast cells/ml.
3. Divide the total number of yeast cells needed by the yeast concentration to find the required sample volume.
In this case,
(9 million yeast cells) / (3 million yeast cells/ml) = 3 ml
So, you would need 3 milliliters of the sample to have 9 million yeast cells for making bread.
Learn more about "sample": https://brainly.com/question/24466382
#SPJ11
a cardboard box without a lid is to have a volume of 23,328 cm3. find the dimensions that minimize the amount of cardboard used. (let x, y, and z be the dimensions of the cardboard box.) (x, y, z) =
The dimensions (x, y, z) that minimize the amount of cardboard used for a box with a volume of 23,328 cm³ are (28, 28, 30).
1. Given the volume, V = x*y*z = 23,328 cm³.
2. The surface area, which represents the amount of cardboard used, is S = x*y + x*z + y*z.
3. To minimize S, we need to use calculus. First, express z in terms of x and y using the volume equation: z = 23,328 / (x*y).
4. Substitute z into the surface area equation: S = x*y + x*(23,328 / (x*y)) + y*(23,328 / (x*y)).
5. Now find the partial derivatives dS/dx and dS/dy, and set them equal to zero.
6. Solve the system of equations to get x = 28 and y = 28.
7. Plug x and y back into the equation for z: z = 23,328 / (28 * 28) = 30.
So the dimensions that minimize the amount of cardboard used are (28, 28, 30).
To know more about partial derivatives click on below link:
https://brainly.com/question/31397807#
#SPJ11
Determine the solution for 0.4(3y + 18) = 1.2y + 7.2.
Answer:
y ∈ ℝ
Step-by-step explanation:
You want the solution to the equation 0.4(3y + 18) = 1.2y + 7.2.
SimplifyThe parentheses can be removed by making use of the distributive property.
0.4(3y + 18) = 1.2y + 7.2 . . . . . . given
0.4(3y) +0.4(18) = 1.2y +7.2
1.2y +7.2 = 1.2y +7.2 . . . . . . . . . true for any value of y
The set of solutions for y is all real numbers.
__
Additional comment
Actually, the solution set is "all complex numbers" as well as any other entities for which multiplication and addition with scalars are defined. For example, y could be a matrix of complex numbers, and the equation would still be true.
Cual es el dominio y el rango de h(x)=16x-4
The domain and range of the function h(x) = 16x - 4 are both all real numbers.
To find the domain and range, we need to examine the function and determine the possible values for x (domain) and
the corresponding output values for h(x) (range).
Domain: Since the function h(x) = 16x - 4 is a linear function, there are no restrictions on the input values for x.
Therefore, the domain includes all real numbers.
Domain: (-∞, +∞)
Range: Similarly, as a linear function, the output values for h(x) can take any real number as well.
Therefore, the range is also all real numbers.
Range: (-∞, +∞)
In conclusion, the domain and range of the function h(x) = 16x - 4 are both all real numbers.
for such more question on domain and range
https://brainly.com/question/26098895
#SPJ11
Find the equation of the line.
Use exact numbers.
y =
Answer:
The equation of the line is y=2x+4
Step-by-step explanation:
The equation of the line is expressed in slope-intercept form.
y=mx+b
m is slope
b is y-intercept
The slope of the equation is 2 since the line rises 2 and over 1, defined as 2/1 or 2.
The Y-Intercept is 4 since that's the only point where the line crosses the y-axis.
If we plug these two numbers into the formula:
The equation of the line is y=2x+4
Answer: y=2x+4
Step-by-step explanation:
Our y-intercept is 4 since we see x=0 when (4,0)
To find our slope, we can choose two points on the graph and do rise/run.
Two points chosen: (1,6) and (2,8)
[tex]\frac{8-6}{2-1} \\= 2[/tex]
Find the value of x in the diagram below. x+10 4x-30 2x+30
Answer:
20
Step-by-step explanation:
Find the area of the region between the graphs of y=20−x2 and y=−3x−20. a) Find the points of intersection. Give the x-coordinate(s). Use a comma to separate them as needed. x= b) Write the equation for the top curve. y= c) The area is Round 1 decimal place as needed.
The area between the curves is approximately 109.7 square units.
To find the points of intersection, we set the two equations equal to each other and solve for x:
[tex]20 - x^2 = -3x - 20[/tex]
Adding[tex]x^2[/tex] and 3x to both sides, we get:
[tex]20 + 20 = x^2 + 3x[/tex]
Simplifying further:
[tex]x^2 + 3x - 40 = 0[/tex]
This is a quadratic equation, which we can solve using the quadratic formula:
[tex]x = (-3\pm \sqrt{(3^2 - 4(1)(-40)))} / (2(1))[/tex]
x = (-3 ± √169) / 2
x = (-3 ± 13) / 2
So the solutions are:
x = 5 or x = -8
Therefore, the points of intersection are (5, -95) and (-8, 44).
To find the top curve, we need to determine which of the two functions has a greater y-value in the region of interest.
We can do this by evaluating each function at the x-values of the points of intersection:
[tex]y = 20 - x^2At x=5, y = 20 - 5^[/tex]2 = -5
[tex]At x=-8, y = 20 - (-8)^2 = -44[/tex]
y = -3x - 20
At x=5, y = -3(5) - 20 = -35
At x=-8, y = -3(-8) - 20 = 4
So the equation for the top curve is y = -3x - 20.
To find the area between the curves, we integrate the difference between the two curves with respect to x, over the interval where the top curve is given by y = -3x - 20:
[tex]A = \int (-8 to 5) [(-3x - 20) - (20 - x^2)] dx[/tex]
[tex]A = \int (-8 to 5) [-x^2 - 3x - 40] dx[/tex]
[tex]A = [-x^3/3 - (3/2)x^2 - 40x][/tex] from -8 to 5
A = [(125/3) - (75/2) - 200] - [(-512/3) + (192/2) + 320]
A = 333/3 - 4/3
A = 109.7 (rounded to 1 decimal place).
For similar question on area.
https://brainly.com/question/25292087
#SPJ11
. Derive the open-loop transfer function of the cascaded system build of the two individuallycontrolled converters. (20p)Converter. Vin. Vout L C. H. GM1 RBuck 1. 48 V. 12 V. 293 μΗ. 47 μF. 1. 1. _Buck 2. 12 V. 5 V. 184 pH. 15 µF. 1. 1. 3
The transfer function of Buck 1 converter is:
[tex]H1(s) = Vout1(s) / Vin1(s) = D / (1 - D) / (s + (R1 * (1 - D)) / (L1 * (1 - D) * C1))[/tex]
The transfer function of Buck 2 converter is:
[tex]H2(s) = Vout2(s) / Vin2(s) = D / (1 - D) / (s + (R2 * (1 - D)) / (L2 * (1 - D) * C2))[/tex]
How to derive the open-loop transfer function of the cascaded system?To derive the open-loop transfer function of the cascaded system, we can find the transfer function of each converter separately and then multiply them.
For Buck 1 converter:
The output voltage Vout1 can be expressed as:
[tex]Vout1 = D * Vin1 / (1 - D) * (1 - exp(-t / (L1 * R1 * (1 - D) * C1)))[/tex]
where D is the duty cycle, Vin1 is the input voltage, L1 and C1 are the inductance and capacitance of the converter, R1 is the resistance of the load, and t is the time.
Taking the Laplace transform of the equation above, we get:
[tex]Vout1(s) = (D * Vin1 / (1 - D)) / (s + (R1 * (1 - D)) / (L1 * (1 - D) * C1))[/tex]
The transfer function of Buck 1 converter is:
[tex]H1(s) = Vout1(s) / Vin1(s) = D / (1 - D) / (s + (R1 * (1 - D)) / (L1 * (1 - D) * C1))[/tex]
For Buck 2 converter:
The output voltage Vout2 can be expressed as:
[tex]Vout2 = D * Vin2 / (1 - D) * (1 - exp(-t / (L2 * R2 * (1 - D) * C2)))[/tex]
where D is the duty cycle, Vin2 is the input voltage, L2 and C2 are the inductance and capacitance of the converter, R2 is the resistance of the load, and t is the time.
Taking the Laplace transform of the equation above, we get:
[tex]Vout2(s) = (D * Vin2 / (1 - D)) / (s + (R2 * (1 - D)) / (L2 * (1 - D) * C2))[/tex]
The transfer function of Buck 2 converter is:
[tex]H2(s) = Vout2(s) / Vin2(s) = D / (1 - D) / (s + (R2 * (1 - D)) / (L2 * (1 - D) * C2))[/tex]
The open-loop transfer function of the cascaded system is the product of the transfer functions of the two converters:
[tex]H(s) = H1(s) * H2(s) = D^2 / (1 - D)^2 / [(s + (R1 * (1 - D)) / (L1 * (1 - D) * C1)) * (s + (R2 * (1 - D)) / (L2 * (1 - D) * C2))][/tex]
Learn more about open-loop transfer function
brainly.com/question/31300185
#SPJ11
11.5 in 16 in find the surface area
The calculated value of the surface area is 184 sq inches
Finding the surface areaFrom the question, we have the following parameters that can be used in our computation:
11.5 in by 16 in
The surface area of the shape is then calculated as
Area = product of dimensions
In other words
Area = Length * Width
Substitute the known values in the above equation, so, we have the following representation
Area = 11.5 * 16
Evaluate
Area = 184 sq inches
Hence, the surface area is 184 sq inches
Read more about surface area at
https://brainly.com/question/26403859
#SPJ1
explain the use of 0.0.0.0 in setting the static routes in this assignment.
0.0.0.0 is used in setting static routes as a default route. This means that any traffic that does not match a specific route in the routing table will be directed to the next hop specified in the 0.0.0.0 route.
In other words, it is the catch-all route. This is commonly used in situations where there is only one gateway or exit point from a network. By setting the default route to the gateway, all traffic that is destined for a location outside of the local network will be sent to the gateway for further processing.
In the context of setting static routes, using the IP address 0.0.0.0 represents the default route, also known as the gateway of last resort. A static route is a manually configured network route that defines a specific path for data packets to follow. The 0.0.0.0 address is used to define a catch-all route for any packets whose destination doesn't match any other specific routes in the routing table. This ensures that the network can still attempt to route the packets even if the destination isn't explicitly defined.
Visit here to learn more about default route brainly.com/question/29360942
#SPJ11
consider the following series. Sqrt n+4/n2 = 1 the series is equivalent to the sum of two p-series. find the value of p for each series. p1 = (smaller value) p2 = (larger value)
The given series is equivalent to the sum of two p-series: ∑n^(-1/2) + ∑n^(-2). Where the first series converges since p1 = 1/2 > 0 and the second series also converges since p2 = 2 > 1.
To start, we can simplify the given series as:
sqrt(n+4)/n^2 = 1
Taking the reciprocal of both sides:
n^2/sqrt(n+4) = 1
Multiplying both sides by sqrt(n+4):
n^2 = sqrt(n+4)
Squaring both sides:
n^4 = n+4
This is a quadratic equation that we can solve using the quadratic formula:
n = (-1 ± sqrt(17))/2
Since we are only interested in positive integer values of n, we take the larger root:
n = (-1 + sqrt(17))/2 ≈ 1.56
Now that we have found the value of n that satisfies the equation, we can rewrite the given series in terms of p-series:
sqrt(n+4)/n^2 = (n+4)^(1/2) / n^2
= (1 + 4/n)^(1/2) / n^2
Using the formula for the p-series:
∑n^-p = 1/1^p + 1/2^p + 1/3^p + ...
We can see that the given series is equivalent to:
(1 + 4/n)^(1/2) / n^2 = n^(-2) * (1 + 4/n)^(1/2)
= n^(-p1) + n^(-p2)
Where p1 is the smaller value and p2 is the larger value of p that make up the two p-series.
We can find p1 and p2 by comparing the exponents of n on both sides of the equation:
p1 = 1/2
p2 = 2
Therefore, the given series is equivalent to the sum of two p-series:
∑n^(-1/2) + ∑n^(-2)
Where the first series converges since p1 = 1/2 > 0 and the second series also converges since p2 = 2 > 1.
to learn more about converges click here:
https://brainly.com/question/30326862
#SPJ11
find the inflection points of f(x)=4x4 22x3−18x2 15. (give your answers as a comma separated list, e.g., 3,-2.) inflection points
f''(2.503) is positive and f''(-0.378) is negative, the function changes concavity at x = 2.503 and x = -0.378. Therefore, these are the inflection points of the function.
Answer: 2.503,-0.378.
What is function?
In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range.
To find the inflection points of a function, we need to find the points at which the function changes concavity, which occurs where the second derivative of the function changes sign.
First, we need to find the second derivative of the given function f(x):
f(x) = [tex]4x^{4}[/tex] - 22x³ - 18x² + 15
f'(x) = 16x³ - 66x² - 36x
f''(x) = 48x² - 132x - 36
Now we set the second derivative f''(x) equal to zero and solve for x to find the critical points:
48x² - 132x - 36 = 0
Dividing both sides by 12, we get:
4x² - 11x - 3 = 0
Solving for x using the quadratic formula, we get:
x = (-(-11) ± sqrt((-11)² - 4(4)(-3))) / (2(4))
x = (11 ± sqrt(265)) / 8
x ≈ 2.503 or x ≈ -0.378
These are the critical points of the function f(x).
Now we need to check the concavity of the function at these points to see if they are inflection points. We can do this by evaluating the second derivative f''(x) at each critical point:
f''(2.503) ≈ 237.878
f''(-0.378) ≈ -82.878
Since f''(2.503) is positive and f''(-0.378) is negative, the function changes concavity at x = 2.503 and x = -0.378. Therefore, these are the inflection points of the function.
Answer: 2.503,-0.378.
To learn more about functions from the given link:
https://brainly.com/question/12431044
#SPJ1
A family of 6 is to be seated in a row. In how many ways can this be done if the father and mother are not to sit together.
Assuming there are only 6 seats in that row.
Case 1 : The father is sitting in neither of both ends.
-> There are only 3 possible seats left for the mother, as she cannot sit to either of the seats next to the father.
-> There are 4 x 3 x 4 x 3 x 2 x 1 = 288 possible ways.
Case 2 : The father is sitting at one end.
-> There are 4 possible seats for the mother (because there is only 1 seat next to the father).
-> There are 2 x 4 x 4 x 3 x 2 x 1 = 192 possible ways.
Altogether, there are 480 possible ways to arrange the family.
If the answer is wrong, please comment because I'm not too confident about this answer to be honest.
There are 480 ways in which this family of 6 can be seated in a row while the father and mother are not sitting together.
We will find the number of arrangements when the father and mother are sitting together (say N), then subtract it from the total number of arrangements.
Now, let us find the total number of arrangements
Total no. of arrangements = 6!
= 720
Now, find the number of arrangements when the father and mother are sitting together. As father and mother are together, treat them as a single person. Now, there are 5 people.
A number of arrangements = 5! =120
but, father and mother can also change their places in 2 ways = 2!
So, N = 120 * 2 = 240
Subtract N from total arrangements, 720-240 = 480.
Therefore, the answer is 480.
To learn more about permutations and combinations;
https://brainly.com/question/4658834
Two containers designed to hold water are side by side, both in the shape of a cylinder. Container A has a diameter of 14 feet and a height of 18 feet. Container B has a diameter of 18 feet and a height of 15 feet. Container A is full of water and the water is pumped into Container B until Container A is empty.
After the pumping is complete, what is the volume of the empty portion of Container B, to the nearest tenth of a cubic foot?
Answer:
First, let's calculate the volume of water that was transferred from Container A to Container B.
The formula for the volume of a cylinder is V = πr^2h, where r is the radius of the cylinder and h is the height.
For Container A:
radius = diameter/2 = 14/2 = 7 feet
height = 18 feet
V_A = π(7)^2(18) ≈ 2,443.96 cubic feet
For Container B:
radius = diameter/2 = 18/2 = 9 feet
height = 15 feet
V_B = π(9)^2(15) ≈ 3,817.01 cubic feet
So the volume of water transferred from Container A to Container B is:
V_water = V_A ≈ 2,443.96 cubic feet
After the transfer, Container B contains both the water that was originally in Container B and the water transferred from Container A. The total volume of water in Container B is:
V_total = V_B + V_water ≈ 6,261.97 cubic feet
To find the volume of the empty portion of Container B, we need to subtract the volume of the water from the total volume of Container B:
V_empty = V_B - V_water ≈ 3,817.01 - 2,443.96 ≈ 1,373.05 cubic feet
So the volume of the empty portion of Container B is approximately 1,373.05 cubic feet.
Answer:
1501.7 ft
DELATAMATH
Step-by-step explanation:
find and classify the local extrema of the function f (x, y) = 3x2y y3−3x2−3y2 2.
The quadratic formula mentioned below is used to get the following solutions for x:
[tex]x = \frac{15y \pm \sqrt{225y^2 - 60y^3}}{15}[/tex]
we can use these solutions of x to find the corresponding values of y:
[tex]y = \frac{6x \pm \sqrt{36x^2 - 60xy}}{6}[/tex]
What is partial derivative?Partial derivative is a type of derivative that is taken with respect to one variable, with all other variables held constant.
The local extrema of the function f (x, y) = 3x2y y³−3x²−3y² 2 can be found by taking the partial derivative of the function with respect to x and y and then setting them equal to zero.
This gives us the following equations:
[tex]\frac{\partial f}{\partial x} = 6xy^3 - 6x = 0[/tex]
[tex]\frac{\partial f}{\partial y} = 3x^2y^2 - 6y = 0[/tex]
To solve these equations, we can set the partial derivatives equal to each other and solve for y:
[tex]6xy^3 - 6x = 3x^2y^2 - 6y[/tex]
[tex]3x^2y^2 - 6y = 6xy^3 - 6x[/tex]
[tex]3x^2y^2 - 6xy^3 = 6x - 6y[/tex]
[tex]y(3x^2 - 6xy^2) = 6x - 6y[/tex]
[tex]y = \frac{6x - 6y}{3x^2 - 6xy^2}[/tex]
Next, we can substitute this expression for y into the equation for the partial derivative with respect to x to get a quadratic equation in x:
[tex]6xy^3 - 6x = 6x\left(\frac{6x - 6y}{3x^2 - 6xy^2}\right)^3 - 6x[/tex]
[tex]6xy^3 - 6x = 6x\left(\frac{6x^2 - 36xy + 36y^2}{(3x^2 - 6xy^2)^2}\right) - 6x[/tex]
[tex]6xy^3 - 6x = 6x\left(\frac{6x^2 - 36xy + 36y^2 - 3x^2 + 6xy^2}{(3x^2 - 6xy^2)^2}\right)[/tex]
[tex]6xy^3 - 6x = 6x\left(\frac{3x^2 - 30xy + 30y^2}{(3x^2 - 6xy^2)^2}\right)[/tex]
[tex]0 = 3x^2 - 30xy + 30y^2[/tex]
This equation can be solved using the quadratic formula to get the following solutions for x:
[tex]x = \frac{15y \pm \sqrt{225y^2 - 60y^3}}{15}[/tex]
Finally, we can use these solutions to find the corresponding values of y:
[tex]y = \frac{6x \pm \sqrt{36x^2 - 60xy}}{6}[/tex]
Therefore, the local extrema of the function f (x, y) =3x2y y³−3x²−3y² 2 can be found by substituting the solutions for x and y into the original function and classifying them as either maximums or minimums depending on the sign of the function.
For more questions related to extrema
https://brainly.com/question/31322200
#SPJ1
One large jar and two small jars together can hold 8 ounces of jam. One large jar minus one small jar can hold 2 ounces of jam.
A matrix with 2 rows and 2 columns, where row 1 is 1 and 2 and row 2 is 1 and negative 1, is multiplied by matrix with 2 rows and 1 column, where row 1 is l and row 2 is s, equals a matrix with 2 rows and 1 column, where row 1 is 8 and row 2 is 2.
Use matrices to solve the equation and determine how many ounces of jam are in each type of jar. Show or explain all necessary steps.
The large jar contains 4 ounces of jam and each small jar contains 2 ounces of jam. X = [4; 2]
We can also use matrix multiplication to represent the total amount of jam in the jars. Let L denote the number of large jars and S denote the number of small jars. Then we have:
LX + S2*X = total jam
Simplifying this expression, we get:
(L + 2S)*X = total jam
Since we know that the total amount of jam that the jars can hold is 8 ounces, we have:
(L + 2S)*X = 8
Substituting the values for X and solving for L + 2S, we get:
(4 + 2*2) * (4; 2) = 8
Therefore, we have:
L + 2S = 2
Since we also know that the large jar minus one small jar can hold 2 ounces of jam, we have:
L - S = 2
Solving these two equations simultaneously, we get:
L = 2
S = 0
there is 1 large jar with 4 ounces of jam and 0 small jars with 2 ounces of jam each. This confirms that the total amount of jam is indeed 8 ounces.
Therefore, X = [4; 2], which means that the large jar contains 4 ounces of jam and each small jar contains 2 ounces of jam.
To learn more about matrix here
https://brainly.com/question/30646566
#SPJ1
suppose x is a uniform random variable on the interval ( 10 , 50. ) find the probability that a randomly selected observation is between 13 and 45.. round your answer to two decimal places? AA.0.64
B.0.5
C.0.80
D.0.20
Option C: 0.80
How to find probability?To find the probability that a randomly selected observation is between 13 and 45 for a uniform random variable x on the interval (10, 50), follow these steps:
1. Calculate the total length of the interval: 50 - 10 = 40.
2. Determine the length of the subinterval between 13 and 45: 45 - 13 = 32.
3. Divide the length of the subinterval by the total length of the interval to find the probability: 32 / 40 = 0.8.
So, the probability that a randomly selected observation is between 13 and 45 is 0.80, which corresponds to option C.
Learn more about probability
brainly.com/question/30034780
#SPJ11
determine whether the given function is linear. if the function is linear, express the function in the form f(x) = ax b. (if the function is not linear, enter not linear.) f(x) = 5 1 5 x
The given function is linear, and it can be expressed in form f(x) = ax + b, f(x) = 1x + 0, or simply f(x) = x.
To determine if the given function is linear, we need to check if it can be expressed in form f(x) = ax + b, where a and b are constants.
The given function is f(x) = (5/1)x.
Let's rewrite the function in the required form:
f(x) = (5/5)x
Since 5/5 = 1, we can simplify the function to:
f(x) = 1x + 0
Here, a = 1 and b = 0.
So, the given function is linear, and it can be expressed in form f(x) = ax + b, f(x) = 1x + 0, or simply f(x) = x.
In Mathematics, a linear function is defined as a function that has either one or two variables without exponents. It is a function that graphs to a straight line. In case, if the function contains more variables, then the variables should be constant, or it might be the known variables for the function to remain it in the same linear function condition.
Visit here to learn more about function:
brainly.com/question/12431044
#SPJ11
Sharifah arranges Mathematics, Science and History reference books on a bookshelf. Given the total number of
reference books is 3 times the number of Science reference books. The number of Science reference books is 6 less
than the Mathematics reference books. Express the number of History reference books in the form of an algebraic
expression.
Step-by-step explanation:
m = number of math books
s = number of science books
h = number of history books
m + h + s = 3s
m + h = 2s
s = m - 6
m + h = 2(m - 6) = 2m - 12
h = m - 12
and since s = m - 6, this also means
h = s - 6
that means, the number of History reference books is 12 less than the Mathematics reference books. which is then 6 less than the number of Science reference books.
Assume that Wi's are independent normal with common variance σ^2. Find the distribution of W = Σ W/in.
The distribution of W = Σ W_i/n is a normal distribution with mean μ and variance σ²/n, where Wi's are independent normal random variables with a common variance σ².
When you sum up independent normal random variables (W_i's), the resulting distribution (W) will also be normal.
The mean (μ) of the resulting distribution is the sum of the means of the individual Wi's divided by n, and the variance is the sum of the variances of the individual Wi's divided by n². Since Wi's have a common variance σ², the variance of W is σ²/n. Therefore, W follows a normal distribution with mean μ and variance σ²/n.
To know more about normal distribution click on below link:
https://brainly.com/question/29509087#
#SPJ11
Michael was offered a job that paid a salary of $36,500 in its first year. The salary was set to increase by 4% per year every year. If Michael worked at the job for 12 years, what was the total amount of money earned over the 12 years, to the nearest whole number?
Answer:
$58438
Step-by-step explanation:
36500×[tex]1.04^{12}[/tex] = 58437.67598
nearest whole number = $58438
Answer:
548442
Step-by-step explanation:
a1 = 36500
a2 = 36500(1+0.04) = 37960
a3 = 37960(1+0.04) = 39478.4
Common ratio: 1+0.04 = 1.04
Sn = [tex]\frac{a1-a1r^n}{1-r}[/tex] = [tex]\frac{36500-36500(1.04)^12}{1-1.04}[/tex] = [tex]\frac{-21937.67598}{-0.04}[/tex] = 548441.8995
≈ 548,442
calculate mad. observation actual demand (a) forecast (f) 1 35 --- 2 30 35 3 26 30 4 34 26 5 28 34 6 38 28
To calculate the Mean Absolute Deviation (MAD) using the given demand and forecast values.
The MAD is the average of the absolute differences between actual demand (A) and forecast (F).
Here are the steps to calculate MAD:
1. Calculate the absolute differences between actual demand and forecast for each observation.
2. Add up all the absolute differences.
3. Divide the sum of absolute differences by the number of observations.
Let's apply these steps to your data:
1. Calculate the absolute differences:
- Observation 2: |30 - 35| = 5
- Observation 3: |26 - 30| = 4
- Observation 4: |34 - 26| = 8
- Observation 5: |28 - 34| = 6
- Observation 6: |38 - 28| = 10
2. Add up the absolute differences:
5 + 4 + 8 + 6 + 10 = 33
3. Divide the sum of absolute differences by the number of observations (excluding the first one since there's no forecasting value for it):
MAD = 33 / 5 = 6.6
So, the Mean Absolute Deviation (MAD) for the given data is 6.6.
To learn more about “demand” refer to the https://brainly.com/question/1245771
#SPJ11
The number of hours a student spent studying each week for 9 weeks is shown.
9, 4.5, 8, 6, 9.5, 5, 6.5, 14, 4
What is the value of the range for this set of data?
4
14
6.5
10
Answer:
D
Step-by-step explanation:
To find the range, we need to first find the difference between the highest and lowest values in the data set.
The highest value is 14, and the lowest value is 4.
Range = Highest value - Lowest value = 14 - 4 = 10
Therefore, the value of the range for this set of data is 10. Option D is correct.
fill in the blank. (enter your answer in terms of s.) ℒ{e−8t sin 9t}
The Laplace transform of [tex]e^(^-^8^t^)sin(9t)[/tex] is[tex](9/(s+8)^2 + 81)/(s^2 + 81)[/tex].
We need to find the Laplace transform of the given function,[tex]e^(^-^8^t^)sin(9t)[/tex], and express the answer in terms of s. The Laplace transform of [tex]e^(^-^8^t^)sin(9t)[/tex] can be found using the formula:
ℒ[tex]{e^(^a^t^) f(t)} = F(s-a)[/tex],
where a is the constant (-8 in this case), f(t) is the function [tex](sin(9t)[/tex] in this case), and [tex]F(s-a)[/tex] is the Laplace transform of f(t) with s replaced by [tex](s-a)[/tex].
Step 1: Find the Laplace transform of [tex]sin(9t)[/tex].
The Laplace transform of [tex]sin(kt)[/tex] is given by the formula:
ℒ[tex]{sin(kt)} = k / (s^2 + k^2)[/tex],
where k is the constant (9 in this case). So,
ℒ[tex]{sin(9t)} = 9 / (s^2 + 9^2)[/tex].
Step 2: Apply the formula ℒ[tex]{e^(^a^t^) f(t)} = F(s-a)[/tex] to find the Laplace transform of [tex]e^(^-^8^t^) sin(9t)[/tex].
Using the result from Step 1, we have:
ℒ[tex]{e^(^-^8^t^) sin(9t)} = 9 / ((s - (-8))^2 + 9^2)[/tex]
ℒ[tex]{e^(^-^8^t^) sin(9t)} = (9/(s+8)^2 + 81)/(s^2 + 81)[/tex]
Know more about Laplace transform here:
https://brainly.com/question/29583725
#SPJ11
can yall pls help me with this this is due tomorrow