find the area of the finite part of the paraboloid z = x2 y2 cut off by the plane z = 81 and where y ≥ 0

By algebraic manipulation ,  the number of items that can be produced at a $267 production cost per item is approximately **8** or **414.

The term "algebraic manipulation" refers to the changing of algebraic expressions, frequently into a simpler or more manageable form. To get an algebraic expression in the required form, variables must be rearranged and replaced. The expression's value stays the same during this rearrangement. Algebraic manipulation is a skill that is developed via practise and problem-solving.

We can manipulate the variables in algebra to isolate n and utilise it to solve the equation 135n+56000/n = 267.

To do this, one method is to multiply both sides by n, yielding the result 135n² + 56000 = 267n.

The following quadratic equation is obtained by rearranging the terms:

135n² - 267n + 56000 = 0.

We can use factoring or the quadratic formula to resolve this.

n = (267 √(2672 - 4*135*56000)) / (2*135) 8.04 or n 413.7 are the answers.

Accordingly, depending on how many products you wish to create, the number of items that can be produced at a $267 production cost per item is approximately **8** or **414.

To know more about algebraic manipulation visit:

brainly.com/question/28931249

#SPJ1

Step-by-step explanation:

If the population of ants in a colony doubles every week and there are initially 135 ants, we can use the following formula to model the growth after n weeks using N as the population of ants:

N = 135 * 2^n

Where n is the number of weeks after the initial population count.

For example, after 1 week, the population would be:

N = 135 * 2^1 = 270

After 2 weeks, the population would be:

N = 135 * 2^2 = 540

And so on. This formula assumes that the ants have no natural predators, diseases, or other factors that would limit their growth, and that the rate of doubling is constant over time.

Answer:

540

Step-by-step explanation:

sorry im in a rush bye gtg :D pls give brainliest

The endpoint of the line segment is (43, 58).

To find the endpoint of the line segment, we need to first find the coordinates of the point that divides the line segment in a 1:5 ratio.

Let's call the endpoint we're looking for (x, y).

We know that the point (13, 14) divides the line segment into two parts with a ratio of 1:5. This means that the distance from (8, 19) to (13, 14) is one-sixth of the distance from (8, 19) to (x, y).

Using the distance formula, we can calculate the distance between the two points:

distance between (8, 19) and (13, 14) = [tex]\sqrt{(13-8)^{2}+(14-19)^{2} }[/tex] = [tex]\sqrt{74}[/tex]

We also know that the distance from (8, 19) to (x, y) is six times the distance from (8, 19) to (13, 14). So:

distance between (8, 19) and (x, y) = 6 * distance between (8, 19) and (13, 14)

= 6 * [tex]\sqrt{74}[/tex]

Now we can use the midpoint formula to find the coordinates of the point that divides the line segment in a 1:5 ratio:

midpoint = ((1/6)*x + (5/6)*13, (1/6)*y + (5/6)*14)

= ((x+65)/6, (y+70)/6)

We know that the midpoint of the line segment is (13, 14), so:

(x+65)/6 = 13 and (y+70)/6 = 14

Solving for x and y, we get:

x = 43 and y = 58

To learn more about endpoint here:

https://brainly.com/question/4407655

#SPJ1

From the box plot, the percentage of the data values that are greater than 65 is 50%.

We know that in the box plot, the first quartile is nothing but 25% from smallest to largest of data values.

The second quartile is nothing but between 25.1% and 50% (i.e., till median)

The third quartile: 51% to 75% (above the median)

And the fourth quartile: 25% of largest numbers.

In box plot, 25% of the data points lie below the lower quartile, 50% lie below the median, and 75% lie below the upper quartile.

In the attached box plot, the median of the data = 65.

So, all the values that are greater than 65 lie in the third and fourth quartile.

This equals about 50% of the data values.

Therefore, the required percentage of the data values that are greater than 65 = 50%.

Learn more about box plot here:

brainly.com/question/14277132

#SPJ1

The system of inequalities is solved and the solutions are ( -5, - 2 )

Given data ,

Let the first inequality be A , 3x+2y≥-19

Let the second inequality be B , x+3y<-11

On simplifying , we get

The solution to the inequality is the point of intersection of the graph

Now , on plotting the graph , we get

The point of intersection is P ( -5 , -2 ) and the solution is point P

And , the points which are not a solution is Q ( 1 , -5 ) , ( 0 , 0 )

Hence , the system of inequalities are solved

To learn more about inequality equations click :

https://brainly.com/question/11897796

#SPJ1

The text is asking for the slope-intercept form of a linear equation that passes through two given points, (-5,5) and (4,-1). The slope-intercept form of a linear equation is y = mx + b, where m is the slope and b is the y-intercept. To find the slope, we use the formula: m = (y2 - y1) / (x2 - x1), where (x1, y1) and (x2, y2) are the given points. Once we find the slope, we can use it to write the equation in point-slope form: y - y1 = m(x - x1). Finally, we can rearrange the point-slope form to get the slope-intercept form.

PEASE MARK BRAINLIEST

ProjW(v1) = [(v1 · [-y+z, y, z]) / ([1, 1, -1] · [1, 1, -1])] [-y+z, y, z]

= [(1/3)(-y+z)] [-y+z, y, z]

= [-y^2/3+y*z/3, y

To find the orthogonal complement of W, we need to find all vectors in R^3 that are orthogonal (perpendicular) to every vector in W.

Let v = [x, y, z] be a vector in R^3. To be orthogonal to W, v must be orthogonal to every vector in W, so we need to find a condition that determines which vectors in R^3 satisfy this requirement.

A vector in W is of the form [x, y, z] = [-y+z, y, z], since x+y-z=0 implies x=-y+z. The dot product of v with [x, y, z] is:

v · [-y+z, y, z] = (-x(y-z) + y^2 + z^2)

For v to be orthogonal to every vector in W, this dot product must be zero for every choice of x, y, and z. In particular, it must be zero for x = y = z = 0. Therefore, we have:

v · [-y+z, y, z] = (-x(y-z) + y^2 + z^2) = 0

This simplifies to:

y^2 - x(y-z) - z^2 = 0

This is a quadratic equation in y, with coefficients that depend on x and z. For this equation to have a solution for every choice of x and z, the discriminant must be non-negative:

x^2 + 4z^2 ≥ 0

This condition is satisfied for all x and z, so the orthogonal complement of W is the set of all vectors v = [x, y, z] in R^3 that satisfy the equation:

y^2 - x(y-z) - z^2 = 0

To find a basis for W⊥, we can use the Gram-Schmidt process to orthogonalize the standard basis vectors e1 = [1, 0, 0], e2 = [0, 1, 0], and e3 = [0, 0, 1] with respect to W. Any resulting vectors that are linearly independent will form a basis for W⊥.

Starting with e1, we need to find the projection of e1 onto W, which is:

projW(e1) = [(e1 · [-y+z, y, z]) / ([1, 1, -1] · [1, 1, -1])] [-y+z, y, z]

= [(1(1)+0(-1)+0(1)) / (1+1+1)] [-y+z, y, z]

= (1/3)[-y+z, y, z]

= [-y/3+z/3, y/3, z/3]

Then, we subtract this projection from e1 to get a vector that is orthogonal to W:

v1 = e1 - projW(e1) = [1, 0, 0] - [-y/3+z/3, y/3, z/3] = [1+y/3-z/3, -y/3, -z/3]

Next, we apply the same process to e2 and e3, using the previous vectors as the new basis for the subspace:

projW(v1) = [(v1 · [-y+z, y, z]) / ([1, 1, -1] · [1, 1, -1])] [-y+z, y, z]

= [(1/3)(-y+z)] [-y+z, y, z]

= [-y^2/3+y*z/3, y

To learn more about orthogonal visit:

https://brainly.com/question/2292926

#SPJ11

Note that the equation in terms of y, volume of air in a person's lungs in mL and t, in seconds, to represent the given context is y = 800 cos (π/2 t) + 1600.

The function depicted in the graph exhibits a periodic nature, characterized by its oscillation between two extreme points.

The time period of the function is derived as T = 4 seconds, given that each complete oscillation occurs between one crest and the subsequent crest or from one through and the subsequent through.

The midline of this function is y = 1600 mL, which denotes its average value.

Furthermore, the amplitude of this function equals half the distance between both extreme values, equivalent to A = 800mL. Given that the function has a period of 4 seconds and that its first crest is located at (2.5, 2600), it follows that we may represent this function with an equation expressed as:

y = A Sin (2π/T ( t-  c)) + 1600


Where:

A = 800
T = 4
2.5, 2600 is a crest


Thus,

1000 = -A + 1600
A = 600

Solving for A, we get

c = 2.5 - T/4 = 0.5


replacing those values, we have:

y = 800 sin (π/2 (t - 0.5)) + 1600

This can be simplified further to read

y = 800 cos (π/2 t) + 1600.

Learn more about equations:
https://brainly.com/question/10413253
#SPJ1

The probability of selecting a multiple of 10 is 2/11 or 0.182, which can also be expressed as 18.2%.

Given that numbers 20 through 30 were written on individual cards and placed in a bag

If you take one card from the bag, we have to find the probability that it will be a multiple of 10

There are two multiples of 10 between 20 and 30, which are 20 and 30.

The total number of cards in the bag is 11 (20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30).

Therefore, the probability of selecting a multiple of 10 is 2/11 or 0.182, which can also be expressed as 18.2%.

To learn more on probability click:

https://brainly.com/question/11234923

#SPJ1

To use systematic random sampling to select dealers from the list of 35 members, we start with the 5th dealer and then select every 6th dealer thereafter. This means we would select dealers numbered 04, 10, 16, 22, 28, and 34. These 6 dealers would be included in the sample for estimating the mean revenue from dealer service departments.
To perform a systematic random sampling of the 35 Metro Toledo Automobile Dealers Association members, you will start with the 5th dealer and select every sixth dealer after that. The dealers included in the sample are as follows: 5, 11, 17, 23, 29, and 35.

random sample  is a subset of individuals (a sample) chosen from a larger set (a population) in which a subset of individuals are chosen randomly, all with the same probability. A simple random sample is an unbiased sampling technique. Simple random sampling is a basic type of sampling.

To know more about random sampling. Click on the link.

https://brainly.com/question/30008808

#SPJ11

Answer:

(-4, -3)

Step-by-step explanation:

When a point is reflected in the x-axis, the x-coordinate does not change, and the y-coordinate becomes negative:

Therefore, if point P(3, 4) is reflected in the x-axis, then:

When a point is rotated 90° clockwise about the origin, it produces a point that has the coordinates (y, -x):

Therefore, if point P'(3, -4) is rotated 90° clockwise about the origin, then:

Using proportion, Tomas can distribute the juice to approximately 22 friends.

Given that,

Total amount of juice = 3 quarts

Amount of juice distributed to each friend = 1/8 liters

1 liter = 1.057 quarts

1/8 liters = 1.057/8 quarts

              = 0.132125 quart

Amount of juice with each friend = 0.132125 quart

Number of friends who got 0.132125 quart = 1

Number of friends who got 3 quarts = 3 / 0.132125 = 22.7 friends

                                                                                    ≈ 22 friends

Hence 3 quarts of juice can be distributed to 22 friends.

Learn more about Proportions here:

https://brainly.com/question/31548894

#SPJ1

The complete question in english is given below.

Tomas wants to distribute 3 quarts of orange juice to his friends in 1-eighth-liter glasses.

How many friends can he distribute the juice?

the experimental probability of rolling a 5 is 18/200 or 9/100, which can be simplified to 0.09 or 9%.

what is experimental probability  ?

Experimental probability is the measure of the likelihood of an event based on actual experimental results or observations, rather than theoretical probabilities. It is calculated by dividing the number of times an event occurs by the total number of trials or observations.

In the given question,

The experimental probability of rolling a 5 can be found by taking the number of times a 5 was rolled and dividing it by the total number of rolls.

From the given data, we can see that a 5 was rolled 18 times out of a total of 200 rolls (sum of frequencies).

Therefore, the experimental probability of rolling a 5 is 18/200 or 9/100, which can be simplified to 0.09 or 9%.

To know more about experimental probability , visit:

https://brainly.com/question/30694293

#SPJ1

Answer:In mathematics, the process of determining which metrics to use is slightly different but still follows some basic steps. Here is a summary:

Define the problem: Identify the specific problem or question that needs to be answered mathematically. For example, if the problem is to optimize a manufacturing process, the relevant metrics could be production output and defect rates.

Identify the variables: Determine the variables that are relevant to the problem or question. These variables could include quantities such as time, distance, temperature, or pressure.

Select the appropriate metrics: Choose the metrics that will be used to measure the variables. In mathematics, metrics can be measures of central tendency, variability, correlation, or other mathematical concepts.

Test and refine the metrics: Test the chosen metrics on real-world data to ensure that they are reliable and accurate. Refine the metrics as needed to improve their performance.

Use the metrics to make decisions: Once the metrics have been validated, use them to make data-driven decisions. This could include optimizing processes, predicting outcomes, or identifying patterns in data.

In terms of who would be involved in the process, it would depend on the nature of the problem or question being addressed. Typically, mathematicians, statisticians, data analysts, and subject matter experts would be involved in the process of selecting and refining the appropriate metrics.

Answer:

D

Step-by-step explanation:

The circle has center (-3, 2) and radius 5. The line is a vertical line passing through the point (-8, 0).

We can see from the graph that the line does not intersect the circle at any point. Therefore, the correct answer is:

D. The line does not pass through the circle.

Part 1: Yes, all squares have 2 pairs of parallel sides.

Part 2: No, not all rectangles have 4 congruent sides.

Part 1: This is because all squares are rectangles, and all rectangles have 2 pairs of parallel sides. Additionally, since all four sides of a square are congruent, this means that the two pairs of sides are also congruent, making them parallel.

Part 2: While all squares are rectangles with 4 congruent sides, rectangles can have two pairs of parallel sides that are not congruent. For example, a rectangle with a length of 5 units and a width of 3 units has two pairs of parallel sides, but they are not congruent.

One pair of sides is longer than the other pair. Therefore, the fact that all squares are rectangles with 4 congruent sides does not mean that all rectangles have 4 congruent sides.

To learn more about rectangles click on,

https://brainly.com/question/23925195

#SPJ1

The poster dimensions are 18 inches by 39 inches, or (18, 39).

We know that Megan cuts out a rectangle with dimensions,
The remaining paper is used to wrap an 11-inch cube with no paper wasted, and there are 3 square inches left over.

Multiplying by 6 to eliminate fractions, we get:
6ab - ab - 15a - 2b + 180 = 7980
Rearranging and factoring, we get:
(5a - b)(a - 6) = 7640
Since b>a, we know that 5a-b must be positive, and thus a-6 must also be positive.

Therefore, we can set up a system of equations:
5a - b = x
a - 6 = [tex]\frac{7640}{x}[/tex]
Solving for a and b, we get:

b = 5a - x
We know that the difference between the length and width of the poster is less than 50, so we can set up an inequality:
The remaining wrapping paper has an area equal to the original poster area minus the cutout area.

We know that the remaining paper is used to wrap an 11-inch cube, which has a surface area of 6(22)=726 square inches, and there are 3 square inches leftover.
Now, we are given that b>a and b-a<50. We can start by testing different integer values for a and b within the given range to see which pair of values satisfies the equation.
After testing values, we find that (a, b) = (18, 39) is the solution that satisfies the equation and the given constraints.

For similar question on dimensions:

https://brainly.com/question/28107004

#SPJ11

The area of the region that is bounded by the curve r=5sin(θ) and lies in the sector 0≤θ≤π is 25/2 square units.

To find the area of the region that is bounded by the curve r=5sin(θ) and lies in the sector 0≤θ≤π, we can use the formula for the area of a polar region:

A = 1/2 ∫(b,a) r(θ)² dθ

where a and b are the values of θ that define the region.

In this case, the region is defined by 0 ≤ θ ≤ π and r(θ) = 5[tex]sin(\theta)^{(1/2)}[/tex], so we have:

A = 1/2 ∫(π,0) [5[tex]sin(\theta)^{(1/2)}[/tex]]² dθ

Simplifying the integrand:

A = 1/2 ∫(π,0) 25sin(θ) dθ

Using the identity ∫sin(θ)dθ = -cos(θ), we get:

A = 1/2 [-25cos(π) + 25cos(0)] = 25/2

Learn more about the bounded regions at

https://brainly.com/question/29201450

#SPJ4

For any other value of a, the vectors −→v = ha 2 , 6i and −→w = h4a, 2i are not parallel.

What is vector?

A vector is a mathematical object that has both magnitude and direction. In physics and engineering, vectors are often used to represent physical quantities such as velocity, force, and acceleration.

Two vectors are parallel if they are scalar multiples of each other, i.e., if one vector is a multiple of the other.

To check if the vectors −→v = ha 2 , 6i and −→w = h4a, 2i are parallel, we can find the scalar k such that:

−→w = k −→v

Using the component form of the vectors, we get:

h4a, 2i = k h a 2 , 6i

This gives us the following system of equations:

4a = ka

2 = 6k

Solving for k in the second equation, we get:

k = 2/6 = 1/3

Substituting k = 1/3 in the first equation, we get:

4a = (1/3) a

Multiplying both sides by 3, we get:

12a = a

Simplifying, we get:

11a = 0

Therefore, the only solution is a = 0.

Thus, for any other value of a, the vectors −→v = ha 2 , 6i and −→w = h4a, 2i are not parallel.

To learn more about vector visit:

https://brainly.com/question/15519257

#SPJ1

Answer: The missing sides measure 3.1 and 5.2cm.

Step-by-step explanation: If the longest side of the triangle measured 6.2cm, and was twice as long as the shortest side, we should divide 6.2 by 2. Our shortest side is 3.1cm and our longest 6.2cm. The perimeter is 14.5, so we add up 6.2 and 3.1 to get 9.3, and then subtract that from 14.5. 14.5 - 9.3 = 5.2, so all the sides are 3.1, 5.2, and 6.2cm. We can be sure that this is the answer when we add 3.1 + 5.2 + 6.2 it equals 14.5. The sides of a scalene triangle all have different sides, so this is correct. If you give your answer choices I can tell you which is correct also.

the solutions to the quadratic equation 3x² - 12x + 7 = 0 are approximately x = 2 + (1/3)√(15) and x = 2 - (1/3)√(15).

what is approximately ?

"Approximately" is used to indicate that a value or quantity is not exact but is close enough to be used or considered as a reasonable estimate. It means that the value given may be slightly higher or lower than the actual value, but it is close enough to be useful for practical purposes.

In the given question,

The correct setup for the quadratic formula for the equation 3x² - 12x + 7 = 0 is:

x = (-b ± √(b² - 4ac)) / (2a)

Where a = 3, b = -12, and c = 7. Substituting these values into the formula, we get:

x = (-(-12) ± √((-12)² - 4(3)(7))) / (2(3))

Simplifying:

x = (12 ± √(144 - 84)) / 6

x = (12 ± √(60)) / 6

x = (12 ± 2√(15)) / 6

x = 2 ± (1/3)√(15)

Therefore, the solutions to the equation 3x² - 12x + 7 = 0 are approximately x = 2 + (1/3)√(15) and x = 2 - (1/3)√(15).

To know more about quadratic equation, visit:

https://brainly.com/question/30098550

#SPJ1

The optimal solution is to cut the wire into two pieces, one forming a square with side length x = 2/π feet, and the other forming a circle with radius r = (1 - 4/π)/π feet.

A two-dimensional figure's area is the amount of space it takes up. In other terms, it is the amount that counts the number of unit squares that span a closed figure's surface.

Let's first start by noting the formulas for the area of a circle and the area of a square in terms of their radius/length:

Area of circle = πr²

Area of square = x²

We also know that the total length of the wire is 2 feet, so the sum of the circumference of the circle and the perimeter of the square must equal 2:

Circumference of circle = 2πr

Perimeter of square = 4x

2πr + 4x = 2

Simplifying this equation, we get:

πr + 2x = 1

We want to maximize the sum of the areas of the circle and square, which is given by:

πr² + x²

We can use the equation we just derived to eliminate r from this expression:

π(1 - 2x)²/4 + x²

Expanding and simplifying this expression, we get:

(π/4)x² - πx + π/4

To find the value of x that maximizes this expression, we need to take the derivative with respect to x and set it equal to zero:

d/dx [(π/4)x² - πx + π/4] = (π/2)x - π = 0

Solving for x, we get:

x = 2/π

Now we can use the equation we derived earlier to find the corresponding value of r:

πr + 2x = 1

πr + 4/π = 1

πr = 1 - 4/π

r = (1 - 4/π)/π

So, the optimal solution is to cut the wire into two pieces, one forming a square with side length x = 2/π feet, and the other forming a circle with radius r = (1 - 4/π)/π feet.

To learn more about the area from the given link

brainly.com/question/25292087

Answer: y=mx+b

Step-by-step explanation: Y= 15.75x + 1200

Answer: y=mx+b

Step-by-step explanation: Y= 15.75x + 1200

The graph of the parabola for the quadratic function, f(x) = x² -12·x + 27, with the vertex point (6, -9), and the y-intercept, (0, 27), created with MS Excel is attached, please find

The x-coordinates of the vertex of the parabola with an equation of the form; f(x) a·x² + b·x + c are;

-b/(2·a)

The specified quadratic function is f(x) = x² - 12·x + 27

Therefore, a = 1, b = -12, and c = 27

The x-coordinate of the vertex is; x = -(-12)/(2 × 1) = 6

The y-coordinate of the vertex is therefore;

f(6) = 6² - 12 × 6 + 27 = -9

The coordinate of the vertex is therefore; (6, -9)

A point on the graph, such as the y-intercept can be found as follows;

f(0) = 0² - 12 × 0 + 27 = 27

The y-intercept of the graph is (0, 27)

Please find attached the graph of the parabola of the function f(x) = x² - 12·x + 27, created with MS Excel

Learn more on the graph of a quadratic function here: https://brainly.com/question/10441997

#SPJ1

Answer:

To find out how many 2/5 meter pieces Sven can cut off from a board that is 9/10 meters long, we need to divide the length of the board by the length of each piece.

We can convert the mixed number 2/5 to an improper fraction by multiplying the whole number 1 by the denominator 5 and adding the numerator 2, giving us 7/5.

Then, we can divide the length of the board, which is 9/10 meters, by the length of each piece, which is 7/5 meters:

(9/10) ÷ (7/5)

To divide by a fraction, we can multiply by its reciprocal:

(9/10) x (5/7)

Simplifying the fractions:

(9 x 5) / (10 x 7) = 45 / 70

We can simplify this fraction by dividing both the numerator and denominator by their greatest common factor, which is 5:

(45/5) / (70/5) = 9/14

Therefore, Sven can cut off 9 pieces that are 2/5 meters long from a board that is 9/10 meters long.

Step-by-step explanation:

the simple answer is that Sven can cut off 9 pieces that are 2/5 meters long from a board that is 9/10 meters long.

rate 5* for more po~

The experimental probability that the next car in the parking lot will be silver is given as follows:

p = 7/10.

A probability is calculated as the division of the desired number of outcomes by the total number of outcomes in the context of a problem/experiment.

Out of 40 cars in the parking lot, 28 are silver, hence the probability is given as follows:

p = 28/40

p = 7/10.

The complete problem is:

Marco counted 40 cars in the parking lot. 28 were silver. What is the experimental probability that the next car in the lot will be silver?

More can be learned about probability at https://brainly.com/question/24756209

#SPJ1

This result holds for any two harmonic functions f and g, and any closed surface S.

The flux of the vector field F through any closed surface S is zero, we can apply the divergence theorem:

∫∫_S F · n dS = ∫∫∫_V ∇ · F dV

So, n is the outward unit normal vector to the surface S, and V is the volume enclosed by S.

Let's compute the divergence of F:

∇ · F = ∇ · (f ∇g) - ∇ · (g ∇f)

= ∇f · ∇g + f ∇²g - ∇g · ∇f - g ∇²f

= f ∇²g - g ∇²f

So, we used the identities ∇ · (fG) = f ∇ · G + ∇f · G and ∇ · (∇f) = ∇²f.

Since both f and g are harmonic functions, we have ∇²f = ∇²g = 0, so ∇ · F = 0. Therefore, the flux of F through any closed surface S is zero:

∫∫_S F · n dS = ∫∫∫_V ∇ · F dV = ∫∫∫_V 0 dV = 0

Learn more about harmonic visit: brainly.com/question/30695895

#SPJ4

The compound interest account earns Isabella more money over the 10-year period due to the effect of compounding.

Explain compound interest

Compound interest is interest that is calculated on both the principal amount and the accumulated interest of an investment. It is essentially "interest on interest" and can result in a larger return compared to simple interest over time. The amount of interest earned is added to the principal, and the next interest calculation is based on the new, larger amount. As a result, the investment grows faster and larger over time with compounding.

According to the given information

Here's the table comparing the earnings in a simple interest account versus a compound interest account for Isabella's situation:

Account Type----------|--Formula------------------|--Interest Earned--|--Total Value

Simple Interest--------|--P*r*a------------------------|--$1,750--------------|--$5,250

Compound Interest--|--P*(1+r)ᵃ---------------------|--$2,294.64--------|--$5,794.64

Here is the time span.

Simple Interest is:

P*r*t =3500*(5/100)*10=$1,750

Total value = $3,500+$1,750=$5,250

Compound Interest is:

P*(1+r)ᵃ= 3500*(1+(5/100))¹⁰=$2,294.64

Total  value= $3,500+$2,294.64=$5,794.64

To know more about compound interest visit

brainly.com/question/14295570

#SPJ1

There are no values of c in the interval where f'(c) = 0. Therefore, the answer is C = (no values)

To use Rolle's theorem, we need to check that the function is continuous on the closed interval [-4,2] and differentiable on the open interval (-4,2). Both conditions are satisfied by f(x) = (2x³ + 21x - 2)/2, so we can proceed with finding the values of c where f'(c) = 0.

First, we find the derivative of f(x):
f'(x) = 6x² + 21/2

Next, we set f'(x) = 0 and solve for x:
6x² + 21/2 = 0
6x² = -21/2
x² = -7/4
x = ±√(-7/4) = ±(i√7)/2

Since these values are not in the given interval (-4,2], we conclude that the correct option is C.

You can learn more about intervals at: brainly.com/question/13708942

#SPJ11

To find the inverse Laplace transform of f(s), we need to first find the partial fraction decomposition of the function.
f(s) = 6s / (s² - 8s + 17) - 1 / (s² - 8s + 17)

To solve for the roots of the denominator, we can use the quadratic formula:
s = (8 ± √(8² - 4(1)(17))) / 2
s = 4 ± j
So the partial fraction decomposition of f(s) is:
f(s) = [A / (s - 4 - j)] + [B / (s - 4 + j)]
To solve for A and B, we can multiply both sides of the equation by the denominator and substitute the roots of the denominator:
6s = A(s - 4 + j) + B(s - 4 - j)
At s = 4 + j:
6(4 + j) = A(j)
At s = 4 - j:
6(4 - j) = B(-j)
Solving for A and B, we get:
A = 3 - j
B = 3 + j
So the partial fraction decomposition of f(s) is:
f(s) = [(3 - j) / (s - 4 - j)] + [(3 + j) / (s - 4 + j)]
Now we can take the inverse Laplace transform of each term using the table of Laplace transforms:
[tex]l^-1{[(3 - j) / (s - 4 - j)]} = e^(4t)cos(t) - e^(4t)sin(t)[/tex]
[tex]l^-1{[(3 + j) / (s - 4 + j)]} = e^(4t)cos(t) + e^(4t)sin(t)[/tex]

So the inverse Laplace transform of f(s) is:
[tex]f(t) = e^(4t)cos(t) - e^(4t)sin(t) - 1 / √13 * e^(4t)sin(t + arctan(3))[/tex]

Therefore, the answer to the question is:
The inverse Laplace transform of f(t) =[tex]l^-1{f(s)} is f(t) = e^(4t)cos(t) -e^(4t)sin(t) - 1 / √13 * e^(4t)sin(t + arctan(3)).[/tex]

for more information on partial fraction decomposition see:

https://brainly.com/question/30894807

#SPJ11