Find the amount of money required for fencing (outfield, foul area, and back stop), dirt (batters box, pitcher’s mound, infield, and warning track), and grass sod (infield, outfield, foul areas, and backstop). Need answers for each area.

The slope (m) is equal to the tangent of the angle, so for a 30-degree angle, m = tan(30) = 1/√3. Since the ray contains the origin, the y-intercept (b) is 0. Therefore, the equation of the ray is y = (1/√3)x.

To determine the equation of the ray consisting of the origin and all points whose bearing is 30 degrees, we first need to find the slope of the ray.

The ray y = x, x > 0 contains the origin and all points in the coordinate system whose bearing is 45 degrees. This means that it forms an angle of 45 degrees with the positive x-axis.

Using trigonometry, we can determine that the slope of this ray is tan(45 degrees) = 1.

To find the slope of the ray we're interested in, which forms an angle of 30 degrees with the positive x-axis, we use the same process: tan(30 degrees) = 1/sqrt(3).

Since the ray passes through the origin, its equation will be of the form y = mx, where m is the slope we just calculated.

So the equation of the ray is y = (1/sqrt(3))x.

Learn more about Equation:

brainly.com/question/29538993

#SPJ11

The solution is: the length VW is 5.

Here, we have,

We are given the length of a line segment VX = 13

We have a point W in the line

The line is divided into two

VX = VW + WX

VX = 13

WX = 8

Hence,

13 = VW + 8

VW = 13 - 8

VW = 5

Therefore, the length VW = 5

To earn more on addition click:

brainly.com/question/29560851

#SPJ1

complete question:

Point W is on line segment V X. Given W X = 8 and VX = 13, determine the length VW

The number of data pairs (n), the mean of x (X, the mean of y (y'), the standard deviation of x (s), and the standard deviation of y (sy).

To calculate the correlation coefficient r, you will need the following information: the number of data pairs (n), the mean of x (X), the mean of y (y'), the standard deviation of x (sx), and the standard deviation of y (sy). Use the given formula: r = [1/(n-1)] Σ(xi - X)(yi - y') / (s * sy)

Plug in the values for each variable, calculate the sum, and divide by (n-1). Then, divide the result by the product of the standard deviations (s × sy). Round your final answer to two decimal places. Keep in mind that the correlation coefficient r can range from -1 to 1.

Visit here to learn more about  standard deviation : https://brainly.com/question/29088233

#SPJ11

The equation of the plane through p0(−7,5,2) perpendicular to the following line is

12c/7(x+7)-9c/7(y-5)+13b/7(z-2)=0

To find the equation for the plane through p0(−7,5,2) perpendicular to the line x=−7 t, y=5−4t, z=−3t, −[infinity], we need to first find the direction vector of the line.

The direction vector of the line is <−7, −4, −3>, which is the coefficients of t in the x, y, and z components respectively.

Now, we know that the normal vector of the plane is perpendicular to the direction vector of the line. So, we can use the cross product of the normal vector and the direction vector to find the equation of the plane.

Let n be the normal vector of the plane. We know that n is perpendicular to <−7, −4, −3>, so we can take the cross product of these two vectors:

n = <−7, −4, −3> ×

To find a, b, and c, we can use the fact that n is perpendicular to the line and passes through p0(−7,5,2). So, we have:

n · <−7, 5, 2> = 0

Substituting n and expanding the dot product, we get:

−7a − 4b − 3c = 0

Solving for a in terms of b and c, we get:

a = (−4b − 3c)/7

Substituting this into the cross-product formula, we get:

n = <−7, −4, −3> × <(−4b − 3c)/7, b, c>

Expanding the cross-product, we get:

n = <12c/7, −9c/7, 13b/7>

Finally, the equation of the plane can be written as:

12c/7(x+7)-9c/7(y-5)+13b/7(z-2)=0

where b and c are free parameters that determine the orientation of the plane.

Learn more about the equation of plane:https://brainly.com/question/10524369

#SPJ11

The correct style to position a grid item in the second row and cover the second and third column depends on the exact layout of the grid.

However, here are four options that could work:

a. Apply the style:

grid-row: 2;

grid-column: 2 / span 2;

This will place the item in the second row and start it from the second column and span it for 2 columns.

b. Apply the style:

grid-row: 2;

grid-column: 2 / 4;

This will place the item in the second row and start it from the second column and end it in the fourth column.

c. Apply the style:

grid-row: 2;

grid-column: 2 / 3;

This will place the item in the second row and start it from the second column and end it in the third column.

d. Apply the style:

grid-row: 2 / 3;

grid-column: 2 / 4;

This will place the item in the second row and span it for 1 row and 2 columns, starting from the second column and ending in the fourth column.

For more such questions on Grid.

https://brainly.com/question/30024373#

#SPJ11

The calculated value of x is 3 given that f(x) = 2x - 1 and f(x) = 5

From the question, we have the following parameters that can be used in our computation:

f(x) = 2x - 1

f(x) = 5

To find x, we can use the formula of the given function:

f(x) = 2x - 1

And substitute f(x) = 5:

5 = 2x - 1

Add 1 to both sides:

6 = 2x

Divide both sides by 2:

x = 3

Therefore, the value of x is 3.

Read more about function at

https://brainly.com/question/28532394

#SPJ1

A passenger can travel approximately 6.875 miles for $20.

An input and an output are connected by a function. It functions similarly to a machine with an input and an output. Additionally, the input and output are somehow connected. The traditional format for writing a function is f(x) "f(x) =... "

We want to find the distance (in miles) that a passenger can travel for $20. Let's call this distance d.

Using the given function, we can set up an equation:

20 = 2.56d + 2.40

Solving for d:

2.56d = 20 - 2.40

2.56d = 17.60

d = 6.875

Therefore, a passenger can travel approximately 6.875 miles for $20.

Learn more about function on:

https://brainly.com/question/10439235

#SPJ1

Answer:

x>4

Step-by-step explanation:

It seems there is only one possible solution to this very problem.

Step-by-step explanation:

Area =  width X height = 7 cm X  7cm = 49 cm^2

Based on the survival experience data provided, the probability that a 75-year-old male will survive to age 80 is 0.769. It is important to note that this probability is based on the survival experience of a total 1,000 males who retire at age 65. However, this data provides a general estimate of the probability of survival based on the sample population studied.

We can calculate the probability that a 75-year-old male will survive to age 80 by using the following formula:

P(Age 75 survives to age 80) = (Number of males surviving at Age 80) / (Number of males surviving at Age 75)

Using the data provided in the table, we can determine that the number of males surviving at Age 80 is 596 and the number of males surviving at Age 75 is 775.

Therefore, the probability that a 75-year-old male will survive to age 80 is:

P(Age 75 survives to age 80) = 596 / 775 = 0.769

Thus, the correct answer is option D. It is important to note that this probability is based on the survival experience of a total 1,000 males who retire at age 65.

This means that there are other factors that may influence an individual's probability of survival, such as their lifestyle habits, medical history, and genetics. However, this data provides a general estimate of the probability of survival based on the sample population studied.

To know more about probability refer here:

https://brainly.com/question/31120123#

#SPJ11

Complete Question:

The following table shows the survival experience of a total 1,000 males who retire at age 65. Based on this data, the probability that a 75-year old male will survive to age 80 is:

Age - Number of male surviving

65 - 1000

70 - 907

75 - 775

80 - 596

85 - 383

A. 0.596

B. 1-0.596 = 0.404

C. 1-0.775 = 0.225

D. 0.769

The critical points for the function f(x, y) are (0, ∛6) and (0, -∛6). To get the critical points for the function f(x, y) = x^3 * y^3 - 9x^2 - 3y - 8, follow these steps:

Step:1. Compute the partial derivatives with respect to x and y:
  - f_x(x, y) = ∂f/∂x = 3x^2 * y^3 - 18x
  - f_y(x, y) = ∂f/∂y = x^3 * 3y^2 - 3
Step:2. Set both partial derivatives equal to 0 to find critical points:
  - 3x^2 * y^3 - 18x = 0
  - x^3 * 3y^2 - 3 = 0
Step:3. Solve the system of equations:
  For the first equation, factor out 3x:
  - 3x(y^3 - 6) = 0
  So, either x = 0 or y^3 - 6 = 0, which gives y = ±∛6.
For the second equation, factor out 3:
  - 3(x^3y^2 - 1) = 0
  So, x^3y^2 - 1 = 0.
Step:4. Combine the information from the two equations:
  - If x = 0, the second equation becomes -1 = 0, which is not possible.
  - If y = ±∛6, the second equation becomes x^3(6 - 1) = 0, which gives x = 0.
So, the critical points for the function f(x, y) are (0, ∛6) and (0, -∛6).

Learn more about critical point here, https://brainly.com/question/7805334

#SPJ11

The critical points for the function f(x, y) are (0, ∛6) and (0, -∛6). To get the critical points for the function f(x, y) = x^3 * y^3 - 9x^2 - 3y - 8, follow these steps:

Step:1. Compute the partial derivatives with respect to x and y:
  - f_x(x, y) = ∂f/∂x = 3x^2 * y^3 - 18x
  - f_y(x, y) = ∂f/∂y = x^3 * 3y^2 - 3
Step:2. Set both partial derivatives equal to 0 to find critical points:
  - 3x^2 * y^3 - 18x = 0
  - x^3 * 3y^2 - 3 = 0
Step:3. Solve the system of equations:
  For the first equation, factor out 3x:
  - 3x(y^3 - 6) = 0
  So, either x = 0 or y^3 - 6 = 0, which gives y = ±∛6.
For the second equation, factor out 3:
  - 3(x^3y^2 - 1) = 0
  So, x^3y^2 - 1 = 0.
Step:4. Combine the information from the two equations:
  - If x = 0, the second equation becomes -1 = 0, which is not possible.
  - If y = ±∛6, the second equation becomes x^3(6 - 1) = 0, which gives x = 0.
So, the critical points for the function f(x, y) are (0, ∛6) and (0, -∛6).

Learn more about critical point here, https://brainly.com/question/7805334

#SPJ11

For the differential equation (x² - 4)² × y"– 2xy' +y = 0, the point x = 0 is option (c) an irregular singular point.

To determine the type of singular point at x = 0 for the given differential equation

(x² - 4)² × y" – 2xy' + y = 0

We need to write the equation in the standard form of a second-order linear differential equation with variable coefficients

y" + p(x)y' + q(x)y = 0

where p(x) and q(x) are functions of x.

Dividing both sides by (x² - 4)², we get

y" – 2x/(x² - 4) y' + y/(x² - 4)² = 0

Comparing this with the standard form, we have

p(x) = -2x/(x² - 4)

and

q(x) = 1/(x² - 4)²

At x = 0, p(x) and q(x) have singularities, so x = 0 is a singular point.

To determine whether the singular point is regular or irregular, we need to calculate the indicial equation.

The indicial equation is obtained by substituting y = x^r into the differential equation and equating coefficients of like powers of x.

Substituting y = x^r into the differential equation, we get

r(r-1) + (-2r) + 1 = 0

Simplifying, we get

r^2 - 3r + 1 = 0

Using the quadratic formula, we get:

r = (3 ± √(5))/2

Since the roots of the indicial equation are not integers, the singular point at x = 0 is an irregular singular point.

Therefore, the correct answer is (c) an irregular singular point.

Learn more about differential equation here

brainly.com/question/14620493

#SPJ4

The given question is incomplete, the complete question is:

For the differential equation (x² - 4)² × y"– 2xy' +y = 0, the point x = 0 is Select the correct answer. a) an ordinary point b) a regular singular point c) an irregular singular point d. a special point e) none of the above

Answer:

y = 2

Step-by-step explanation:

If you look at the highest point on the original and lowest on the reflection, there is a difference of 6. That is, 5 to -1 is a distance of 6. So, the parallelogram must have been reflected across the midpoint. 6/2 = 3, 5-3 =2

The answer of the given question based on probability is ,  option (d) 12.50%, which is just slightly lower than the calculated value.

Probability is measure of likelihood or chance of event occurring. It is number between 0 and 1, where 0 represents impossible event and 1 represents certain event. In other words, the probability of an event happening is the ratio of the number of favorable outcomes to the total number of possible outcomes. Probability theory is  branch of mathematics that deals with study of random phenomena and their analysis, like  flipping of coin or the rolling of dice.

To calculate the expected return for the asset, we need to multiply each return by its corresponding probability and then sum up the results.

Expected return = (0.05 x 0.1) + (0.1 x 0.1) + (0.1 x 0.505) + (0.25 x 0.25) = 0.005 + 0.01 + 0.0505 + 0.0625 = 0.128

Therefore, the expected return for the asset is 12.8%.

The closest option to this answer is (d) 12.50%, which is just slightly lower than the calculated value.

To know more about event visit:

https://brainly.com/question/30874203

#SPJ1

Answer:

To calculate the mean length of the insects found, we can use the following formula:

Mean length = (Sum of lengths) / (Number of lengths)

We can calculate the sum of lengths by adding up the lengths of all the insects and dividing by the number of insects:

Sum of lengths = Length (0) + Length (10) + Length (20)

Sum of lengths = 0 mm + 10 mm + 20 mm

Sum of lengths = 30 mm

Number of lengths = 3

Mean length = Sum of lengths / Number of lengths

Mean length = 30 mm / 3

Mean length = 10 mm

Therefore, the mean length of the insects found is 10 mm.

Based on the given values for each letter in the alphabet, you can determine the value of any combination of letters.

Here's a step-by-step explanation:
1. Identify the letters in the given combination.
2. Find the corresponding value for each letter using the given values (A=1, B=2, C=3, D=4, etc.).
3. Add the values together to get the total value of the combination.

For example, if you want to find the value of the combination "AB":
1. Identify the letters: A and B.
2. Find the values: A=1 and B=2.
3. Add the values together: 1+2=3.

So, the value of the combination "AB" is 3. You can follow these steps for any combination of letters using the provided alphabet values.

To learn more about “the alphabet” refer to the https://brainly.com/question/28059759

#SPJ11

where the above conditions are given

2.2.1 To calculate the electrical rating of the small front plate of the stove in kilowatt (kW), we need to divide the wattage by 1000:

1900 W / 1000 = 1.9 kW

From the log table, we can see that the geyser uses the most electricity, with a total of 336 kWh used for the week.

To reduce consumption in this area, Mr Thorn could consider using the geyser less frequently or reducing the temperature setting.

the cost of electricity of the refrigerator with freezer is;

total kWh x cost per kWh:

13.9 kWh x R0.945/kWh = R13.13

the total kWh Mr Thorn used when boiling his kettle for the week, we need to convert the time used in minutes to hours:

40 minutes = 40/60 hours = 0.67 hours

Calculating  the total kWh:

1.4 kW x 0.67 hours = 0.938 kWh

Learn more about electrical rating:
https://brainly.com/question/30504737
#SPJ1

The measure of the side AC is 23. 69

Using the Pythagorean theorem, we have that the square of the longest side of a triangle is equal to the sum of the squares of the other two sides of the triangle.

The other two sides of the triangle are the opposite and the adjacent sides.

This is represented as;

x² = y² + z²

Now, substitute the values

25² = 8² + z²

Find the square values

625 = 64 +z²

collect the like terms

z² = 625 - 64

z² = 561

Now,find the square root of both sides

z =23. 69

Learn more about Pythagorean theorem at: https://brainly.com/question/654982

#SPJ1

q1 = (1/√5, -1/√5, 2/√5), q2 = (2/√53, -1/√53, -4/√53), q3 = (-4/√57, -8/√57, -3/√57); q3 belongs to left nullspace; least squares solution is x = (15/53, 109/53).


(a) Use Gram-Schmidt process on A's columns to find orthogonal vectors u1, u2:
u1 = (1, -1, 2); normalize u1 to get q1 = (1/√5, -1/√5, 2/√5).

u2 = (12, -2, 4) - proj_u1(12, -2, 4) = (10, 0, -4); normalize u2 to get q2 = (2/√53, -1/√53, -4/√53).

(b) q3 must be orthogonal to both q1 and q2. Use cross product: q3 = q1 × q2 = (-4/√57, -8/√57, -3/√57). q3 is

orthogonal to column space of A, so it belongs to left nullspace.

(c) Find least squares solution Ax = (1,2,7): x = A^TA^-1 A^Tb = (15/53, 109/53).

To know more about Gram-Schmidt process click on below link:

https://brainly.com/question/30761089#

#SPJ11

the divider for calculating the distance to the target in centimeters would be 171.5 cm. 1.The speed of sound in air at room temperature (20°C) is approximately 343 meters/second.

2. To convert the speed of sound to centimeters/microsecond, we need to convert meters to centimeters and seconds to microseconds:
- 1 meter = 100 centimeters
- 1 second = 1,000,000 microseconds

So, the speed of sound in centimeters/microsecond is:
(343 meters/second) * (100 centimeters/meter) * (1 second/1,000,000 microseconds) = 0.0343 centimeters/microsecond

3. To find the divider for calculating the distance to the target in centimeters, you need to consider the time it takes for the sound to travel to the target and back. Since the distance is doubled (to the target and back), you need to divide the time by 2. Thus, the divider should be:
(speed of sound in cm/μs) * (time in μs) / 2

For example, if your delay time was 100 microseconds, the calculation would be:
(0.0343 cm/μs) * (100 μs) / 2 = 171.5 cm

So, the divider for calculating the distance to the target in centimeters would be 171.5 cm.

to learn more about speed click here :

https://brainly.com/question/13943409

#SPJ11

The number of rabbits in Elkgrove doubles every month, starting with 20 rabbits. The function N(t) = 20 * 2^t expresses the number of rabbits after t months.

Let N(t) be the number of rabbits at time t in months.

Initially, there are 20 rabbits, so N(0) = 20.

Since the number of rabbits doubles every month, we have

N(1) = 2 * N(0) = 2 * 20 = 40

N(2) = 2 * N(1) = 2 * 40 = 80

N(3) = 2 * N(2) = 2 * 80 = 160

...

In general, we can express the number of rabbits as a function of time t as

N(t) = 20 * 2^t

where t is measured in months. This is an exponential function, with a base of 2 and an initial value of 20.

To know more about Function:

https://brainly.com/question/2822810

#SPJ4

Small integral root of the characteristic equation by inspection; then factor by division5y^(3) - 4y" - 11y' - 2y =0. The solutions to the original equation are: y = -1/5 and y = -1.

To find a small integral root of the characteristic equation, we need to first write the equation in its characteristic form:

r^(3) - (4/5)r^(2) - (11/5)r - (2/5) = 0

Now, we can try plugging in small integers for r until we find a root that satisfies the equation. Trying r = 1, we get:

1^(3) - (4/5)(1)^(2) - (11/5)(1) - (2/5) = 0

This simplifies to:

-2/5 = 0

Since this is not true, we move on to the next integer. Trying r = -1, we get:

(-1)^(3) - (4/5)(-1)^(2) - (11/5)(-1) - (2/5) = 0

This simplifies to:

-2/5 = 0

Again, this is not true. We move on to r = 2:

2^(3) - (4/5)(2)^(2) - (11/5)(2) - (2/5) = 0

This simplifies to:

0 = 0

Since this is true, we have found a small integral root of the characteristic equation: r = 2.

Now, to factor the equation by division, we divide the original equation by (y-2), which gives us:

5y^(2) + 6y + 1 = 0

This can be factored into:

(5y + 1)(y + 1) = 0

Therefore, the solutions to the original equation are:

y = -1/5 and y = -1.

to learn more about equations click here:

https://brainly.com/question/9312365

#SPJ11

The probability of a z-score less than -1.48 or greater than 1.48 is approximately 0.1394.

The sample proportion, p-hat, is a random variable that follows a normal distribution with a mean of the true population proportion, p, and a standard deviation of:

[tex]\sqrt{[(p(1-p))/n]}[/tex]

where n is the sample size.

In this case, p = 0.07, n = 220, and the maximum difference allowed between the sample proportion and the population proportion is 0.04. We can write this as:

|p-hat - p| > 0.04

Simplifying this inequality, we get:

p-hat < p - 0.04 or p-hat > p + 0.04

To calculate the probability of either of these events occurring, we need to find the z-scores corresponding to the two cutoff points. Using the formula for the standard error of the sample proportion, we get:

SE = sqrt[(p(1-p))/n] = sqrt[(0.07 * 0.93)/220] = 0.027

The z-score corresponding to a sample proportion that is 0.04 below the population proportion is:

z1 = (p - 0.04 - p) / SE = -1.48

The z-score corresponding to a sample proportion that is 0.04 above the population proportion is:

z2 = (p + 0.04 - p) / SE = 1.48

The probability of either of these events occurring can be found using the standard normal distribution table or calculator. The probability of a z-score less than -1.48 or greater than 1.48 is approximately 0.1394. Therefore, the probability that the sample proportion will differ from the population proportion by more than 0.04 is approximately 0.1394, rounded to four decimal places.

To learn more about probability visit: https://brainly.com/question/30034780

#SPJ11

The total distance traveled over the interval 0 < t < 8 is: 32/3 + 16/3 + 176/3 = 224/3.

To find the displacement over the given interval, we need to integrate the velocity function:

∫v(t)dt = ∫(t^3 - 10t^2 + 24t)dt = (1/4)t^4 - (10/3)t^3 + 12t^2

Now we can evaluate the displacement over the different intervals:

0 < t < 4:

(1/4)(4)^4 - (10/3)(4)^3 + 12(4)^2 = 32/3

4 < t < 6:

(1/4)(6)^4 - (10/3)(6)^3 + 12(6)^2 - [(1/4)(4)^4 - (10/3)(4)^3 + 12(4)^2]

= -16/3

6 < t < 8:

(1/4)(8)^4 - (10/3)(8)^3 + 12(8)^2 - [(1/4)(6)^4 - (10/3)(6)^3 + 12(6)^2]

= 176/3

Therefore, the displacement over the entire interval 0 < t < 8 is:

32/3 - 16/3 + 176/3 = 64/3

To find the distance traveled over the given interval, we need to break down the motion into the different intervals of direction:

0 < t < 4: The particle is moving in the positive direction, so the distance traveled is the same as the displacement, which is 32/3.

4 < t < 6: The particle is moving in the negative direction, so the distance traveled is the absolute value of the displacement, which is 16/3.

6 < t < 8: The particle is moving in the positive direction, so the distance traveled is the same as the displacement, which is 176/3.

Learn more about displacement here:

https://brainly.com/question/29769926

#SPJ11

The total distance traveled over the interval 0 < t < 8 is: 32/3 + 16/3 + 176/3 = 224/3.

To find the displacement over the given interval, we need to integrate the velocity function:

∫v(t)dt = ∫(t^3 - 10t^2 + 24t)dt = (1/4)t^4 - (10/3)t^3 + 12t^2

Now we can evaluate the displacement over the different intervals:

0 < t < 4:

(1/4)(4)^4 - (10/3)(4)^3 + 12(4)^2 = 32/3

4 < t < 6:

(1/4)(6)^4 - (10/3)(6)^3 + 12(6)^2 - [(1/4)(4)^4 - (10/3)(4)^3 + 12(4)^2]

= -16/3

6 < t < 8:

(1/4)(8)^4 - (10/3)(8)^3 + 12(8)^2 - [(1/4)(6)^4 - (10/3)(6)^3 + 12(6)^2]

= 176/3

Therefore, the displacement over the entire interval 0 < t < 8 is:

32/3 - 16/3 + 176/3 = 64/3

To find the distance traveled over the given interval, we need to break down the motion into the different intervals of direction:

0 < t < 4: The particle is moving in the positive direction, so the distance traveled is the same as the displacement, which is 32/3.

4 < t < 6: The particle is moving in the negative direction, so the distance traveled is the absolute value of the displacement, which is 16/3.

6 < t < 8: The particle is moving in the positive direction, so the distance traveled is the same as the displacement, which is 176/3.

Learn more about displacement here:

https://brainly.com/question/29769926

#SPJ11

The correct answer is C. False because Ø contains no elements so nothing can belong to it.

In the area of mathematical logic known as set theory, we study sets and their characteristics. A set is a grouping or collection of objects. These things are frequently referred to as elements or set members. A set is, for instance, a team of cricket players.

We can say that this set is finite because a cricket team can only have 11 players at a time. A collection of English vowels is another illustration of a finite set. However, many sets, including sets of whole numbers, imaginary numbers, real numbers, and natural numbers, among others, have an unlimited number of members.

False because Ø contains no elements so nothing can belong to it.

learn more about set theory

https://brainly.com/question/30764677

#SPJ11

Here are the differences between a square and a rhombus.

Square. Its properties are

(a) All sides are equal.

(b) Opposite sides are equal and parallel.

(c) All angles are equal to 90 degrees.

(d) The diagonals are equal.

(e) Diagonals bisect each other at right angles.

(f) Diagonals bisect the angles.

(g) The intersection of the diagonals is the circumcentre. That is, you can draw a circle with that as centre to pass through the four corners.

(h) The intersection of the diagonals is also the incentre. That is, you can draw a circle with that as centre to touch all the four sides.

(i) Any two adjacent angles add up to 180 degrees.

(j) Each diagonal divides the square into two congruent isosceles right-angled triangles.

(k) The sum of the four exterior angles is 4 right angles.

(l) The sum of the four interior angles is 4 right angles.

(m) Lines joining the mid points of the sides of a square in an order form another square of area half that of the original square.

(n) If through the point of intersection of the two diagonals you draw lines parallel to the sides, you get 4 congruent squares each of whose area will be one-fourth that of the original square.

(o) Join the quarter points of a diagonal to the vertices on either side of the diagonal and you get a rhombus of half the area of the original square.

(p) Revolve a square about one side as the axis of rotation and you get a cylinder whose diameter is twice the height.

(q) Revolve a square about a line joining the midpoints of opposite sides as the axis of rotation and you get a cylinder whose diameter is the same as the height.

(r) Revolve a square about a diagonal as the axis of rotation and you get a double cone attached to the base whose maximum diameter is the same as the height of the double cone.

Rhombus. Its properties are

(a) All sides are equal.

(b) Opposite sides are parallel.

(c) Opposite angles are equal.

(d) Diagonals bisect each other at right angles.

(e) Diagonals bisect the angles.

(f) Any two adjacent angles add up to 180 degrees.

(g) The sum of the four exterior angles is 4 right angles.

(h) The sum of the four interior angles is 4 right angles.

(i) The two diagonals form four congruent right angled triangles.

(j) Join the mid-points of the sides in order and you get a rectangle.

(k) Join the mid-points of the half the diagonals in order and you get a rhombus.

(l) The distance of the point of intersection of the two diagonals to the mid point of the sides will be the radius of the circumscribing of each of the 4 right-angled triangles.

(m) The area of the rhombus is a product of the lengths of the 2 diagonals divided by 2.

(n) The lines joining the midpoints of the 4 sides in order, will form a rectangle whose length and width will be half that of the main diagonals. The area of this rectangle will be one-half that of the rhombus.

(o) If through the point of intersection of the two diagonals you draw lines parallel to the sides, you get 4 congruent rhombus each of whose area will be one-fourth that of the original rhombus.

(p) There can be no circumscribing circle around a rhombus.

(q) There can be no inscribed circle within a rhombus.

(r) Two congruent equilateral triangles are formed if the shorter diagonal is equal to one of the sides.

(s) Two congruent isosceles acute triangles are formed when cut along the shorter diagonal.

(t) Two congruent isosceles obtuse triangles are formed when cut along the longer diagonal.

(u) Four congruent RATs are formed when cut along both the diagonals. These RATs cannot be isosceles RATs.

(v) Join the quarter points of both the diagonals and you get a similar rhombus of 1/4th area as the parent rhombus.

(w) Revolve a rhombus about any side as the axis of rotation and you get a cylindrical surface with a convex cone at one end a concave cone at the other end. Their slant heights will be the same as the cylindrical sides of the solid.

(x) Revolve a rhombus about a line joining the midpoints of opposite sides as the axis of rotation and you get a cylindrical surface with concave cones at the both ends.

(y) Revolve a rhombus about the longer diagonal as the axis of rotation and you get a solid with two cones attached at their bases. The maximum diameter of the solid will be the same as the shorter diagonal of the rhombus.

(z) Revolve a rhombus about the shorter diagonal as the axis of rotation and you get a solid with two cones attached at their bases. The maximum diameter of the solid will be the same as the longer diagonal of the rhombus.

We need a sample size of at least 677 to estimate the proportion within ±0.01 with 90% confidence

We need to use the formula:

n = (z² × p × q) / E²

where:
- n is the sample size
- z is the z-score corresponding to the desired confidence level (90% in this case), which is 1.645
- p is the proportion we are trying to estimate (we don't have any previous research or knowledge about it, so we assume it to be 0.5 for maximum variability)
- q is 1 - p
- E is the margin of error, which is 0.01

Plugging in the values, we get:

n = (1.645² × 0.5 × 0.5) / 0.01²
n = 676.039

So, we need a sample size of at least 677 to estimate the proportion within ±0.01 with 90% confidence, assuming we don't have any previous knowledge about the proportion.

Learn more about sample size.

brainly.com/question/30885988

#SPJ11

If x is contractible and y is path-connected, then [x, y ] has a single element.

Suppose that x is contractible and y is path-connected. We want to show that [x, y] has a single element.

Since x is contractible, there exists a constant map f: X → {x₀}, where x₀ is some fixed point in x. In other words, f takes every point in x to x₀.

Now, let g: [0,1] → y be any path in y. Since y is path-connected, we can always find such a path.

We can define a map h: [0,1] → [x,y] as follows:

h(t) = (f(1-t), g(t))

Note that h is well-defined, continuous, and takes h(0) = (x₀, g(0)) and h(1) = (x₀, g(1)).

Now suppose that there exist two elements a = (a₁, a₂) and b = (b₁, b₂) in [x, y]. We want to show that a = b.

Since a and b are in [x,y], we have a₁, b₁ ∈ x and a₂, b₂ ∈ y.

Since x is contractible, we have the constant map f: x → {x₀}. So, a₁ and b₁ both map to x₀.

Since y is path-connected, we have the path g: [0,1] → y from a₂ to b₂. Therefore, we can define the map h: [0,1] → [x, y] as:

h(t) = (x₀, g(t))

Note that h is well-defined, continuous, and takes h(0) = a and h(1) = b.

Since [0,1] is connected, the image of h, which is a subset of [x, y], must be connected as well. But the only connected subset of [x, y] with more than one point is the entire interval [x, y] itself. Since h takes distinct endpoints a and b to the same connected subset of [x, y], it must be the case that a = b. Therefore, we have shown that any two elements of [x,y] are equal, which means that [x,y] has a single element.

To know more about contractible, here

brainly.com/question/31504409

#SPJ4

The apothem of the polygon, give the area of the dodecagon, would be 3. 69 inches .

The apothem of a polygon can be defined as the radius of its inscribed circle, or as the perpendicular distance between any one of its sides and the center of the shape.

The apothem of a 12 - gon, given the area to be 140 square inches is therefore:

140 = 2 × x ² x tan ( 180 / 2 )

x = 3. 69 inches

In conclusion, the apothem would be 3. 69 inches .

Find out more on apothem at https://brainly.com/question/30626035

#SPJ1

The iterated integral is [tex]\frac{2}{3}\left(1+e^5\right)^{\frac{3}{2}}-\frac{2}{3}[/tex].

What is Integrate?

In calculus, integration is the process of finding the integral of a function. The integral is the inverse of the derivative, and it represents the area under a curve between two points. Integration is a fundamental concept in calculus, and it has many applications in various fields such as physics, engineering, economics, and more.

The integral of a function f(x) over an interval [a, b] is denoted by ∫(a to b) f(x) dx, and it is defined as the limit of a sum of areas of rectangles as the width of the rectangles approaches zero. In other words, it is the sum of infinitely many small areas under the curve.

Integrate with respect to w first, treating v as a constant:

[tex]$$\int_0^{e^v} \sqrt{1+e^v} d w=\left[w \sqrt{1+e^v}\right]_0^{e^v}=e^v \sqrt{1+e^v}[/tex]

[tex]$$2. Integrate the result from step 1 with respect to $\mathrm{v}$ :$$[/tex]

[tex]$$\int_0^5 e^v \sqrt{1+e^v} d v=\left[\frac{2}{3}\left(1+e^v\right)^{\frac{3}{2}}\right]_0^5=\frac{2}{3}\left(1+e^5\right)^{\frac{3}{2}}-\frac{2}{3} .$$[/tex]

Therefore, the value of the iterated integral is

To learn more about integral  visit:

https://brainly.com/question/18125359

#SPJ11