SIP identity protocols are widely used on IP telephones. On IP phones, which ensure that traffic is authenticated between two companies holding public/private keys, are uncommon.
Both ensure that traffic between two companies with public/private keys is authenticated, and they are uncommon on IP phones. Neither ensure that traffic between two companies with public/private keys is authenticated, nor are they common on IP phones.
What are IP telephones?
IP telephony refers to any phone system that sends and receives voice data over an internet connection. Unlike traditional telephones, which use landlines to send analog signals, IP phones connect to the internet using a router and modem.
The first publicly available IP phone appeared on the market in 1995. However, it had poor audio quality and was prohibitively expensive when compared to a standard phone system.
To know more about IP telephones, visit: https://brainly.com/question/14255125
#SPJ4
in the context of your data, explain what is meant by the standard error of the slope - see ln10 for details.
The predicted slope, b (the regression coefficient calculated from the sample), and the population slope,, are separated from one another approximately by the standard error of the slope coefficient, Sb.
What is the standard deviation?The standard error of the mean, or simply standard error, indicates how likely it is that the population mean will differ from a sample mean. It demonstrates how much the sample mean would vary if the same study were conducted again using new samples taken from the same population.
What does regression's standard error mean?The standard error of the regression (S), also known as the standard error of the estimate, displays the average distance between the observed values and the regression line. Conveniently, Using the units of the response variable, it indicates the average degree of error of the regression model.
To know more about standard error visit:-
https://brainly.com/question/16631965
#SPJ4
Exercise 1. (efficient power) Last assignment, we had a function able to calculate the power by multiplying every time the base, which leads to the following Oz function: declare fun Power N M) if M-= 0 then 1 else N Power N M-1) end end For example, (Power 2 8) returns 256 after 8 recursive calls. The complexity of this function is O(M), since there are M recursive calls, each responsible for one multiplication operation. Write a more efficient version of Power, by reusing the intermediate results. For example, the previous computation may be done using only 3 multiplications, namely 2-22, 2-(2) (2), 2(2 (2) What will be the complexity of this efficient algorithm?
Divide-and-conquer is a strategy that can be used to implement an algorithm that is more effective:
1. M is divided by 2
2. If the remainder of M / 2 is 0, then, return the product of Power (N, M / 2) × Power (N, M/2)
3. Else, return the Product of N × Power (N, M/2) × Power (N, M/2).
What is algorithm?A finite sequence of exact instructions is known as an algorithm in mathematics and computer science. Algorithms are frequently used to solve a class of particular problems or to carry out computations. For carrying out calculations and data processing, algorithms are used as specifications.
In order to route the execution of the code through different paths, more sophisticated algorithms can carry out automated deductions and use logical and mathematical tests. Alan Turing already used terms like "memory," "search," and "stimulus" to describe machines in a metaphorical manner by evoking aspects of human nature.
A heuristic, on the other hand, is a method of problem solving that may not be fully specified or may not guarantee correct or ideal results, particularly in problem domains where there isn't a clearly defined correct or ideal result.
Learn more about algorithms
https://brainly.com/question/24953880
#SPJ4
List at least two reasons why database systems support data manipulation using a declarative query language such as SQL, instead of just providing a library of C or C++ functions to carry out data manipulation
Easier for both programmers and non-programmers to learn. The choice of an efficient execution technique is left up to the database system, so the programmer does not have to worry about how to create queries to make sure they will execute quickly.
Why do database systems allow for the alteration of data?Data presented in a uniform manner allows it to be more easily organized, read, and comprehended. When combining data from several sources, you might not have an uniform perspective, but you can ensure that the data is formatted and stored consistently with data manipulation and commands.
What is DBMS, and why should you know at least two of its benefits?Data is managed by the DBMS, and it can be read, locked, and modified using the database engine.
To know more about SQL visit :-
https://brainly.com/question/24180759
#SPJ4
If an analyst creates the same kind of document over and over or customizes the appearance of a final report, they can use _____ to save them time.
A. a template
B. an .rmd file
C. a filter
D. a code chunk
The Correct Option is A.
they can use a template to save them time.
Template
In the context of word processing software, the term "template" refers to a sample document with some details already in place; these details can be added/completed, removed, or changed (as opposed to a fill-in-the-blank approach as in a form) either manually or through an automated iterative process, such as with a software assistant. The user can edit, save, and manage the final product as a regular word processing document after the template is finished. By using word processing templates, it is possible to avoid spending the initial setup and configuration time required to create standardised documents like a résumé.
Additionally, they make it possible for the word processing program's user interface to be automatically set up with features like autocompletion, toolbars, thesaurus, and spelling options.
The majority of word processing programmes typically come with templates as a standard feature. Additionally, users of such software frequently have the choice to build and store their own templates, buy them from the product's original provider or from other people, or a combination of these options.
To know more about Template, Check out:
https://brainly.com/question/13566912
#SPJ4
computer-aided design software helps architects, engineers, and scientists to design, analyze, and manufacture products with the precision of human-level intelligence. which of the following technologies does cad incorporate to achieve this?
Artificial intelligence technologies does cad incorporate to achieve this..
Describe artificial intelligence in plain terms?
In order to simulate how the human mind makes decisions and solves problems, artificial intelligence uses computers and other devices.
Artificial general intelligence (AGI), which is on par with human skills, artificial superintelligence (ASI), which is more intelligent than a human, or artificial narrow intelligence (ANI), which has a limited range of abilities.
What does artificial intelligence serve?
With the aid of artificial intelligence (AI), machines may mimic human behavior and learn from their mistakes as well as adapt to new inputs.
Today's examples of AI, such as chess-playing machines and self-driving automobiles, mainly rely on deep learning and natural language processing.
Learn more about Artificial intelligence
brainly.com/question/22678576
#SPJ4
if the following program is supposed to put down three tennis balls, where is the logic error? 1 function start() { 2 placethreeballs(); 3 } 4 5 function placethreeball() { 6 for (var i
There is a logic error in Line 2 (for i in range(4):)
What is a logic error?
A logic mistake, as used in computer programming, is a flaw in a program that makes it run erroneously but does not cause it to end unexpectedly. Even though it might not be immediately apparent, a logic error results in unwanted or undesirable output or other behavior. For instance, saying "Get me a cup of coffee." when what was really meant to be "Get me a cup of tea."
A logic error is a programming mistake that results in unexpected and incorrect behavior. A program's output may be wrong as a result of a logic error, which is categorized as a type of runtime error. Additionally, it might result in a running software crash.
To learn more about a logic error, use the link given
https://brainly.com/question/28957248
#SPJ4
Consider the following code snippet. Is count < 5 always true, always false, or sometimes true/sometimes false at point 2?
int count= 0;
while (count< 5)
System. out. printIn("CodeHS Rocks!")
count++ ;
// point 2
}
a. count 5 is always true at point 2
b. count 5 always false at point 2
c. count 5 is sometimes true/ sometimes false at point 2
C.) count < 5 is sometimes true/sometimes false at point 2 using while loop
In programming, the while-loop statement is a conditional looping statement that runs a block of code if one or more conditions are met.
The while loop in the program would initially set the count variable's value to zero, but if the count variable was less than five, the while loop would stop and the code block would not be executed until the count was equal to five.
The while loop in Java is used to repeatedly iterate over a portion of the program until the specified Boolean condition is met. The loop automatically stops when the Boolean condition changes to false. The while loop is regarded as an if statement that repeats itself.
The condition is evaluated first in a while loop, and if it returns true, the statements inside the loop are executed. The control exits the while loop and proceeds to the following statement when the condition returns false.
To know more about While loop visit
brainly.com/question/15172842
#SPJ4
2. GIVEN A SPECIFIC SEQUENCE OF INSTRUCTIONS: ...............
...............
What will be the performance of executing the above 5 instructions in a pipeline implementation (one stage takes 250ps)? Briefly explain or draw a picture? What will be the performance of executing the above 5 instructions in a single-cycle implementation if: Accessing (using) Memory Units takes: 250 ps
Register File takes: 50 ps Main ALU takes: 200 ps Note: accessing the other units is considered to take no time; Please Help!! 5 Instructions are load, store, r-format, beq, jump
I wasn't sure since all of them have different operands like beq only perform in stage IF, ID, EX. Does this mean loads are 250 x 5 = 1250ps store is 250 x 4 = 1000ps r-format 250 x 4 = 1000ps and beq 250 x 3 = 750ps ? Or do they all take the same time? 1250ps??
Pipeline diagram: Each of the five instructions runs through five pipeline steps, taking 1250 ps in total. A pipeline has an input end and an output end in a pipelined processor.
Implementing a pipeline is what?Multiple instructions are executed simultaneously using a technique called "piping." Stages are separated in the computer process. In parallel, each stage completes a portion of an instruction.
How does the pipeline process work?Gathering instructions from the processor and passing them through a pipeline is known as pipelinelining. It enables the orderly process of storing and carrying out instructions. Pipeline processing is another name for it. Multiple instructions are executed simultaneously using a technique called pipelining.
To know more about pipeline implementation visit :-
https://brainly.com/question/15858219
#SPJ4
FILL IN THE BLANK. Many e-commerce sites now host areas where users can post ratings, questions, or comments about a product or service. The content that is posted in these areas is referred to as ___ generated content (UGC).
User-generated content (UGC) is written content that a website receives from an unpaid source.
What exactly is meant by "user-generated content"? User-generated content, commonly referred to as UGC or consumer-generated content, is unique content created by customers that is brand-specific and posted on social media or other platforms.UGC can be found in a variety of formats, including pictures, movies, reviews, a recommendation, or even a podcast.User-generated content (UGC) is information that is posted on a website by an unpaid contributor.The data could be a picture, a video, a post on a blog or discussion board, a vote in a poll, or a comment on a social media website.User-generated content is what it stands for.User-generated content is, by definition, any type of content—text, posts, photographs, videos, reviews, etc.—created by unique individuals (not brands) and posted to an online or social network.To learn more about User-generated content refer
https://brainly.com/question/29857419
#SPJ4
An entity type whose existence depends on another entity type is called a _entity. variant O codependent weak strong An attribute that must have a value for every entity (or relationship) instance is a(n): O optional attribute. O composite attribute. multivalued attribute. required attribute.
An attribute is a quality or feature of an entity type that is important to the organization.
What is a relationship between two entities known as when it is maintained?Association is kept inside a single entity in a unary relationship. Relationship between instances of the same entity set is known as a recursive relationship. Relationship between two entities in a binary form.
when one entity depends on another for its existence.An entity that depends on another entity for its existence is considered weak. Weakness is applied to all entities that depend on ID. But there are other weak entities that are independent of ID. The identifier of the weak child object does not contain the parent's identifier.
To know more about attribute visit:-
https://brainly.com/question/28163865
#SPJ4
You are given a list of students names and their test scores. Design a pseudocode that does the following: Calculates the average test scores. Determines and prints the names of all the students whose test scores are below the average test score. Determines the highest test score. Prints the names of all the students whose test scores are the same as the highest test score. You are to divide this problem into sub problems as follows: The first sub problem determines the average test score. The second sub problem determines and prints the names of all the students whose test scores are below the average test score. The third sub problem determines the highest test score. The fourth sub problem prints the names of all the students whose test scores are the same as the highest test score. The main pseudocode combines the solutions of the sub problems.
design a c++ code
The following pseudocode are:
MAIN
// Calculate and print the average test score
SET totalScore to 0
FOR each student in list
SET totalScore to totalScore + student's test score
END FOR
SET avgScore to totalScore / number of students
PRINT avgScore
// Determine and print the names of all students whose test scores are below the average test score
FOR each student in list
IF student's test score < avgScore
PRINT student's name
END IF
END FOR
// Determine the highest test score
SET highestScore to 0
FOR each student in list
IF student's test score > highestScore
SET highestScore to student's test score
END IF
END FOR
// Print the names of all the students whose test scores are the same as the highest test score
FOR each student in list
IF student's test score = highestScore
PRINT student's name
END IF
END FOR
what is pseudocode?
Pseudocode, which is not a particular language of programming, is a means to convey a collection of instructions or actions in a human-readable format. Prior to actually writing a programme in a programming language, it is frequently used to create and plan a programme.
Pseudocode can be employed to describe a program's architecture or to give specific instructions to a programmer. The pseudocode needs to be stated clearly, concisely, and in English-like phrases that are simple to comprehend. In order to make it easy to follow, it must also be divided into steps.
When writing pseudocode, you should first state the program's objective before breaking it down into smaller, easier-to-manage activities. It's crucial to be as specific as you can.
To learn more about pseudocode
https://brainly.com/question/24953880
#SPJ4
To increase security on your company's internal network, you want to implement a firewall that blocks gaming and adult content without examining transmitted packets and sessions. which of the following firewall types would you implement to block this type of content?
The firewall types to be implement to block that type of content is proxy firewalls.
What is firewall?Firewall is a device in network security to monitors the network traffic. Firewall have four type which is packet filtering firewalls, circuit-level gateway, stateful inspection firewalls, and proxy firewall.
Packet filtering firewalls is to monitor and can block the source IP, source port, destination IP, destination port, and protocol.
Circuit-level gateway is similar to packet filtering firewalls except that it can be operated in higher layer of OSI model.
Stateful inspection firewalls is similar to packet filtering firewall but it can dynamically adjust the predefined set of rules in established connection.
Proxy firewall or application-level gateway is same as a packet filtering firewalls but it also can to monitor the content of package.
Since the company want to block the content of package that have gaming and adult content, so the firewall types that must be implemented is proxy firewall.
You question is incomplete, but this is a general answer about firewall.
Learn more about firewall here:
brainly.com/question/13693641
#SPJ4
Which of the following is true regarding subclasses?
O A subclass has access to private instance variables of its superclass.
O A subclass does not have access to public instance variables of its superclass.
O A subclass must specify the implicit parameter to use methods inherited from its superclass.
O A subclass has no access to private instance variables of its superclass.
Subclasses can access the private instance variables of the superclass indirectly by using the public accessor and mutator methods, but they cannot directly access the public methods of the superclass that they extend.
Can a private subclass exist?No, is the answer. No, they don't. Subclasses' OBJECTS include the private fields of their superclasses. The subclass itself has NO IDEA of the superclass's private fields.
Can a subclass call a private method?With a reference to a subclass, we are unable to access a superclass's private methods. The Superclass Reference is "see" However, it includes Subclass Object. Consequently, we can only access the Private Method by using Superclass Reference.
To know more about superclasses. visit:-
brainly.com/question/14959037
#SPJ4
Clearly describe how the cultural values of an entire country may shape the type and scope of cybercrime. identify the kinds of beliefs and values that are promoted in that country or society.
The relationship between culture and cybersecurity and cybercrimes has been suggested in earlier studies (Kshetri, 2005, 2006, 2009a; 2010a, b, c, d; 2013a, b, c, d; 2014a, b). Governments, businesses, victims, and hackers are examples of significant players whose behaviors are influenced by cultural norms.
What is cybercrime, and what impact does it have globally?Cybercrime refers to any illegal behavior that involves, targets, or otherwise involves a computer, computer network, or networked device. Most cybercrimes are performed by hackers or cybercriminals who are motivated by financial gain.
In your own words, describe what cybercrime is.Any illegal behavior that utilizes a computer, networked device, or network is considered a cybercrime. While the majority of cybercrimes are committed in order to profit the perpetrators.
To know more about cybersecurity visit :-
https://brainly.com/question/28112512
#SPJ4
Q:
After previewing and cleaning your data, you determine what variables are most relevant to your analysis. Your main focus is on Rating, Cocoa.Percent, and Company.Location. You decide to use the select() function to create a new data frame with only these three variables.
Assume the first part of your code is: trimmed_flavors_df <- flavors_df %>%
Answer:
To create a new data frame with only the Rating, Cocoa.Percent, and Company.Location variables using the select() function, you can use the following code:
Code:
# create a new data frame with only the Rating, Cocoa.Percent, and Company.Location variables
trimmed_flavors_df <- flavors_df %>%
select(Rating, Cocoa.Percent, Company.Location)
In this code, the trimmed_flavors_df variable will be assigned a new data frame that contains only the Rating, Cocoa.Percent, and Company.Location columns from the flavors_df data frame.
I hope this helps! Let me know if you have any questions.
Your laptop was recently upgraded to Windows 10 but is now running more slowly due to the increased memory requirements. You have decided to install some additional RAM to speed up the laptop. Which of the following should you install?
Answer:
To increase the speed of your laptop, you should consider installing additional Random Access Memory (RAM). RAM is a type of computer memory that is used to store data that is being actively used or accessed by the system. The more RAM a computer has, the more data it can store in memory and the faster it can access and use that data.
When choosing additional RAM for your laptop, there are a few things you should consider:
Compatibility: Make sure the RAM you choose is compatible with your laptop's hardware and operating system. You can check the specifications of your laptop to determine the type of RAM it supports (e.g. DDR4, DDR3, etc.) and the maximum amount of RAM it can handle.
Capacity: Consider how much additional RAM you need to improve the performance of your laptop. If you are using resource-intensive applications or running multiple programs at once, you may want to install more RAM to help your laptop handle the load.
Speed: Look for RAM with a higher speed rating, as this can help improve the performance of your laptop. However, keep in mind that faster RAM may also be more expensive.
In summary, to speed up your laptop, you should install additional RAM that is compatible with your laptop's hardware and operating system, has sufficient capacity to meet your needs, and has a high speed rating.
Explanation:
You are traveling to Thailand on a business trip. Your laptop's touchscreen display is visibly flickering when plugged into the power outlet at a local coffee shop. You take your laptop to your hotel room, and you notice it doesn't flicker when plugged in there. Which of the following is the MOST likely cause of this issue?
The option that is the MOST likely cause of this issue is option A: The coffee shop was experiencing power fluctuations that led to the flickering of the display.
What is the laptop's touchscreen about?There are a few potential causes for a flickering display on a laptop when it is plugged into a power outlet:
Power fluctuations: If the power outlet in the coffee shop is prone to fluctuations, it could cause the display to flicker. This could also be caused by a problem with the power supply itself.Loose connections: It's possible that the power cord or the connection between the power cord and the laptop is loose, causing an interruption in the power supply.Lastly, Software issues: The flickering could be caused by a problem with the operating system or other software on the laptop.
Learn more about laptop's touchscreen from
https://brainly.com/question/29676208
#SPJ1
See full question below
You are traveling to Thailand on a business trip. Your laptop's touchscreen display is visibly flickering when plugged into the power outlet at a local coffee shop. You take your laptop to your hotel room, and you notice it doesn't flicker when plugged in there. Which of the following is the MOST likely cause of this issue?
Options are :
The coffee shop was experiencing power fluctuations that led to the flickering of the display
The digitizer of the laptop is faulty
The inverter of the laptop is faulty
The battery of the laptop is failing to charge
true or false, select the subdocument and then unlink it so that the subdocument becomes a permanent part of the master document.
At the body level and with Outline view enabled, you create a subdocument in the master document.
What occurs if a Subdocument is delinked?Click Disconnect. The selected subdocuments' content is combined with the main document and is now a part of the main document. It is advised that you remove the files from the subdocuments that were merged into the main document.
What view would you apply to a master document if you were to add a subdocument?The outline view is required in order to use the master and sub documents. Changing to Outline View Pick the View tab first. Word surrounds each subdocument (or link to a subdocument) with a box and an icon in the upper left corner.
To know more about master document visit :-
https://brainly.com/question/15627895
#SPJ4
Question 6 of 10
The "drawers" where blocks in MakeCode Arcade are stored are found in
which area?
A. Workspace
B. Right side panel
C. Image editor
D. Toolbox
The "drawers" where blocks in MakeCode Arcade are stored are found in the C. Image editor area
When coding, where do you put your blocks on MakeCode?Annotations placed at the start of an API element define blocks (export function, method, enum, etc.). On annotation lines that start with the comment form //%, attributes are defined.
The program that your arcade will execute is defined by blocks that snap into one another. Blocks can run on their own (buttons, shaking, etc.) or they can run only when snapped into an event. The on-start event is the first to run.
Therefore, "code drawers" in the editor's center are where the blocks are kept.
Learn more about MakeCode Arcade from
https://brainly.com/question/28959978
#SPJ1
Answer: D. Toolbox
Explanation:
Help please i need it before tomorrow if possible
Enthalpy Changes the overall energy change in the substance portrayed in the graph at 48°C.
What are the data that were obtained from the question?Mass (m) = 0.3 Kg
Initial temperature (T1) = 20°C
Heat (Q) added = 35 KJ
Specific heat capacity (C) = 4.18 KJ/Kg°C
Final temperature (T2)
The final temperature of water can be obtained as follow:
Q = MC(T2 – T1)
35 = 0.3 x 4.18 (T2 – 20)
35 = 1.254 (T2 – 20)
Clear the bracket
35 = 1.254T2 – 25.08
Collect like terms
1254T2 = 35 + 25.08
1.254T2 = 60.08
Divide both side by the coefficient of T2 i.e 1.254
T2 = 60.08/1.254
T2 = 47.9 ≈ 48°C
Therefore, the final temperature of the water is 48°C.
Learn more about temperature on:
https://brainly.com/question/11464844
#SPJ1
How can edge computing be used to improve sustainability?
Answer:
Edge computing is a type of distributed computing that brings computing and data storage closer to the edge of the network, or closer to the devices and sensors that generate and collect data. This can help improve sustainability in a number of ways:
Energy efficiency: By bringing computing and data storage closer to the source of data, edge computing can reduce the amount of energy required to transmit and process data. This can help reduce carbon emissions and other environmental impacts.
Resource conservation: Edge computing can help reduce the demand for resources such as water and raw materials by enabling more efficient and targeted use of resources. For example, edge computing can be used to monitor and optimize irrigation systems in agriculture, or to optimize energy consumption in buildings.
Transportation: Edge computing can help reduce transportation emissions by enabling more efficient and targeted use of transportation resources. For example, edge computing can be used to optimize delivery routes or to monitor and control traffic flow in real-time.
Waste reduction: Edge computing can help reduce waste by enabling more efficient and targeted use of resources. For example, edge computing can be used to monitor and optimize industrial processes, or to predict and prevent equipment failures.
Overall, edge computing has the potential to help improve sustainability by enabling more efficient and targeted use of resources, reducing energy and resource consumption, and minimizing waste.
Explanation:
You deploy a new Linux server used for administration and management tasks. You are tasked to set up the server so that your team's custom scripts with custom global variables will run successfully. What of the following actions would you take to accomplish this?
In the /etc/profile.d/ directory, add the scripts that configure the environment variables for your team. Script administrators can set extra system-wide variables in the /etc/profile.d/ directory, which acts as a storage repository.
Which system administration protocol does Linux use the most frequently?Secure Shell Protocol (SSH) is a name for it. When managing Unix-like systems, it is most frequently utilized. Linux is among them.
What exactly do system administrators for Linux do?Linux administration includes the installation and configuration of applications as well as the backup and restoration of files, disaster recovery, new system builds, automation, user maintenance, filesystem cleanliness, and system security and storage management.
To know more about Linux server visit :-
https://brainly.com/question/28514137
#SPJ4
method 4: modify registry editor if you see the error when installing the windows upgrade: something happened 0x80070002, you can try this method to solve the issue.
At the point when you got this sort of mistake, you can definitely relax! Adhere to the directions in the techniques underneath to just purpose Windows Update blunders 0x80070002.
The time settings have a significant impact on the Windows update, and details are the key to success. Simply checking the settings for the date and time could solve your issue:
After selecting "Control Panel," open "Date and Time," select "Change date and time" and make any necessary adjustments; select your time zone before pressing OK; select "Internet Time" before selecting "Change Settings"; select "Synchronize with an Internet time server"; press "Update Now" twice; close all open windows; and then restart your computer before accessing Windows Update. If your system had the incorrect time set, the 0x80070002 error should be fixed by following the above instructions.
Solution Check and Remove the Corrupted System Files If the quick fix does not work, you should scan your system to see if any files are corrupted.
Scan and Check the Corrupted System Files First, click the Windows icon and type cmd. Next, right-click the command prompt and select Run as Administrator. Type "SFC /scannow" and press enter. Try running Windows Update once more if you get the message that everything went well. If you get an error saying that corrupted files were found but cannot be fixed, please try to remove the corrupted files. Second, Remove the Corrupted Windows Update Files .Select "Control Panel" by selecting "Start." Type "Managerial Devices" in the pursuit box and press Enter.
Double-click "Service" in the pop-up windows. When asked for the administrator password or confirmation, enter the password and confirm.
After sorting the items alphabetically using the "Name" tab, you can quickly locate the Windows Update service. Select Stop by right-clicking on it.
If deleting system files does not help, you can eliminate the software distribution folder to resolve the 0x80070002 error.
To know more about WINDOWS UPDATE visit
brainly.com/question/29990978
#SPJ4
Asymmetric-key encryption uses which of the following techniques to allow users to communicate securely?
a. A message digest
b. A 16-bit encryption key
c. A public key and a private key
d. A digital signature
C) Asymmetric-key encryption uses a public key and a private key to allow users to communicate securely.
What is Asymmetric-key encryption?
A public key and a private key, which are connected mathematically, are used in asymmetric encryption for encryption and decryption. The associated private key is used for decryption if the public key is utilised for encryption. The associated public key is used for decryption if the private key is employed for encryption.
Asymmetric-key encryption, also known as public-key encryption, uses a public key and a private key to allow users to communicate securely.
In asymmetric-key encryption, each user has a pair of keys: a public key and a private key. The public key is used to encrypt messages that are sent to the user, and the private key is used to decrypt those messages. The private key is kept secret by the user, while the public key is shared with others.
To send a secure message to another user, the sender uses the recipient's public key to encrypt the message. The recipient can then use their private key to decrypt the message. Because the private key is kept secret, only the intended recipient is able to decrypt the message, ensuring that the communication is secure.
To know more about Asymmetric-key encryption checkout https://brainly.com/question/8455171
#SPJ4
A networked application on the web obtains information from various sources and combines them to show a result to the user, it may be using: a. Service oriented architecture b. Ethernet OC. Peer-to-peer computing Consider the following statements: Statement 1: Drive-by hacking is legal Statement 2: War driving is illegal O a. Statement 1 is true, Statement 2 is false Ob.Statement 1 is true, Statement 2 is true OC. Statement 1 is false, Statement 2 is true d. Statement 1 is false, Statement 2 is false
Option a: Because all incoming and outgoing requests must be translated, NAT filters unwanted packets sent by attackers. This gives the opportunity to authenticate incoming requests and set rules to stop some attacks.
NAT permits the utilization of Private IP address inside a company and these IP address can be reused in other confidential organizations.
Option c) Because the specific method by which it is encrypted is unknown, it is not completely secure and cannot be detected in the network. Additionally, it is vulnerable to man in the middle attacks.
Option a) Drive by hacking or war driving is not against the law because these services are in charge of pulling data from a variety of sources and making it possible to obtain updated results from a variety of web sources. Drive by hacking is a method for gaining unauthorized access to that network, while war driving is a method for sniffing out networks that are not protected.
To know more about NAT visit
brainly.com/question/30048546
#SPJ4
Search the internet and find information on major technology projects. Then, assign yourself as a project manager for this project and start managing it by: o Identifying the stakeholders for the project. o Identify the business, organization, and technology aspects related to the project. o Define the personality of the organization undertaking the project by applying the four frames of organizations. o Choose the organizational structure that in your opinion will suit the project and can you provide a justification for why you selected this type of structure? o Which project lifecycle model is most suited for the project? Provide a justification for your answer
The project lifecycle model that is most suited for the project is called linear project management life cycle model. This is because The linear life cycle is best suited for initiatives with clear objectives from the beginning.
The definition of a linear project life cycle?The development of the initial concept through the deployment of an end result, output, or advantages are all divided into separate phases in a linear (waterfall) life cycle. High structure, predictability, and stability are the goals of this strategy.
Therefore, one can say that Fixed needs are provided for the project via linear life cycle models. The project's total cost and work volume have been defined and are not expected to vary at any point during the process. As a result, it reduces the requirement for unforeseen expenses or tasks that crop up mid-project.
Learn more about project lifecycle model from
https://brainly.com/question/14472908
#SPJ1
i run the air conditioning, windshield wipers, and headlights on my car while the engine isn't running when i'm waiting to pick up my husband
Answer:
You car's battery would most likely die because the engine isn't running. When you have the engine on, it will even out how much energy is being used.
Explanation:
Which describes the state of "weak" vs. "strong" Artificial Intelligence (Al) in the
marketplace?
O Current Al models can adapt on their own across domains of data, without intervention.
O Al models have surpassed human capabilities to evolve and change.
O The current state of Al offerings would be classified mostly as "weak" Al at this point.
O The marketplace will have "strong" Al solutions ready for delivery within the next year.
O I don't know this yet.
Submit answer
Answer:
Strong AI has a complex algorithm that helps it act in different situations, while all the actions in weak AIs are pre-programmed by a human. ... They can process and make independent decisions, while weak AI-based machines can only simulate human behaviour.
Explanation:
If the checksum doesn't compute for a packet sent at the Internet Protocol (IP) level, what will happen to the data?
Answer:
Explanation:
If the checksum doesn't compute for a packet sent at the IP level, then the data will be discarded by any routers it passes through until it reaches its destination. The data will not be delivered to its intended recipient.
A network device that connects two networks together and only allows packets
through that are needed.
Packet
Server
Bridge
Router
Answer:
Bridge
Explanation:
A bridge is a network device that connects two networks together and only allows packets through that are needed.