Answer: touches
Explanation:
5. a capacitor is connected into a 1250-v, 1000-hz circuit. the current flow is 80 a. what is the capacitance of the capacitor?
QCS=QC1+QC2+QC3. When we cancel the charge Q, we get the formula 1CS=1C1+1C2+1C3, which contains the equivalent capacitance, CS, of three capacitors connected in series.
Any number of capacitors in a series network can be included in the generalization of this formula. The polarity of an AC current alternates between positive and negative on a regular basis. As the polarity of the current changes, capacitors are continuously charged and discharged, allowing AC current to pass through. A capacitor, as contrast to a battery, is a component of a circuit that temporarily stores electrical energy by dispersing charged particles between (often two) plates to produce a potential difference. A capacitor may charge more fast than a battery and can discharge its whole stored energy in a matter of seconds.
Learn more about capacitor here-
https://brainly.com/question/17176550
#SPJ4
a heat engine uses a monatomic gas in a brayton cycle. part a what is the engine's thermal efficiency if the gas volume is halved during the adiabatic compression?
The engine's thermal efficiency if the gas volume is halved during the adiabatic compression is 24%
Any thermal cycle's efficiency is expressed as
[tex]$$\eta=1-\frac{T_c}{T_h}$$[/tex]
We know that for an adiabatic process
[tex]$$p V^\gamma=\text { const }$$[/tex]
From the first law, we may express pressure in terms of temperature.
[tex]$$\begin{aligned}& p V=n R T \\& \Rightarrow p=\frac{n R T}{V} \propto T V^{-1}\end{aligned}$$[/tex]
As a result, we have the following for an adiabatic process:
[tex]$$T V^{\gamma-1}=\text { const } .$$[/tex]
Let us now calculate a temperature ratio based on the volume ratio:
[tex]$$T_c V_c^{V-1}=T_h V_h^{\gamma-1}$$[/tex]
We get that
[tex]\frac{T_c}{T_h}=\frac{V_h^{\gamma-1}}{V_c^{\gamma-1}}=\left(\frac{V_h}{V_c}\right)^{\gamma-1}$$[/tex]
The Efficiency will be,
[tex]$$\begin{array}{r}\eta=1-\left(\frac{V_h}{V_c}\right)^{\gamma-1} \\\eta=1-\left(\frac{1}{2}\right)^{1.40-1}=24 \% .\end{array}$$[/tex]
To learn more about adiabatic process visit:https://brainly.com/question/14930930
#SPJ4
The 20-kg crate is lifted by a force of F = ( 100 +{ 5t }^{ 2 }) NF=(100+5t 2)N, where t is in seconds. Determine how high the crate has moved upward when t = 3 s, starting from rest.
4.23 m is the height the crate can move in 3s.
At t = 0,
force F = 100 N.
the time taken to move upward is 3s
Since at this moment,
2 F = 200 N > W = 20(9.81) = 196.2 N2F=200N>W=20(9.81)=196.2N,
the crate will move at that moment force F is applied. Referring to the Free body diagram of the crate,
[tex]m(v_y)_1 + \sum\int\limits^{t_2}_{t_1} {F_y} \, dt=m(v_y)_2[/tex]
=> [tex]0+2\int\limits^t_0 {100+5t^2} \, dt-20(9.81)t=20v[/tex]
=>[tex]2(100t+\frac{5}{3} t^3)-196.2t =20v[/tex]
=> v={0.1667[tex]t^3[/tex] + 0.19 t} m/s
The displacement of the crate can be calculated by integrating
ds = v dt with the primary condition s = 0 at t = 0.
[tex]\int\limits^s_o \, ds =\int\limits^t_o {0.1667t^3+0.19t} \, dt[/tex]
=> s={0.04167[tex]t^4[/tex]+0.095[tex]t^3[/tex]}m
At time t = 3 s,
s=0.04167 ( [tex]3^4[/tex] ) + 0.095 ( [tex]3^3[/tex])
=> s = 4.23 m
To learn more about Displacement :
https://brainly.com/question/28689760
#SPJ4
what is the phenomenon called when the center of a galaxy gets extremely bright due to lots of material falling into the supermassive galaxy at the center of a galaxy?
When this occurs, a supernova results. A supernova is a star that explodes and sends a portion of the star into space. Supermassive black holes are believed by scientists to have formed simultaneously with the galaxy they are in.
What is Galaxy ?
Galaxies are collections of stars and other celestial objects that are gravitationally bound. The cosmos contains more than 100 billion galaxies, each of which has stunning formations seen in photographs captured by telescopes of the far sky.
According to Jenna Samuel, a PhD candidate in astrophysics at the University of California, Davis, a galaxy may be conceptualised as a collection of stars, gas, and dark matter that are all gravitationally bonded to one another
A galaxy is a vast region of space bound together by gravity and made up of stars, dust, interstellar gas, stellar remains, and dark matter. The Greek word "galaxies" is the source of the English word "galaxy." It is challenging to gauge the size of the cosmos! There are numerous galaxies in the cosmos, and each one contains millions of stars that are constrained by a special force called gravitational pull. The cosmos contains about 70,000,000,000 stars. The Milky Way Galaxy contains the solar system in which our planet is located.
Learn more about Galaxy from given link
https://brainly.com/question/13956361
#SPJ1
The magnetic field is uniform over each face of the box shown in (Figure 1). Suppose B1 = 2 T, B2 = 2 T.Part AWhat is the magnetic field strength on the front surface?
[tex]B_{f}[/tex] = - 4T is the magnetic field strength on the front surface for the given details B1 = 2 T, B2 = 2 T .
In terms of direction, we know that by convention, the flux entering the surface is negative and the flux leaving the surface is positive.
Apply the following formula to all of the box's surfaces:
3T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) =6* [tex]10^{-6}[/tex]T[tex]m^{2}[/tex] on the left surface
3T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = 6* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] for the right surface
-2T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -4* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] top surface
-1T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -2* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] bottom surface
-2T(2 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = -2* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] back surface
Assume that the magnetic field strength on the front surface is [tex]B_{f}[/tex]
[tex]B_{f}[/tex]T(1 * [tex]10^{-6}[/tex] [tex]m^{2}[/tex]) = [tex]B_{f}[/tex]* [tex]10^{-6}[/tex] T[tex]m^{2}[/tex] front surface
The net flux through all of the box's surfaces should be zero.
(6T +6T-4T-2T+BfT)([tex]10^{-6}[/tex][tex]m^{2}[/tex]) = 0
When we divide [tex]10^{-6}[/tex][tex]m^{2}[/tex] on both sides, we get:
12T-8T+[tex]B_{f}[/tex]=0
4T+[tex]B_{f}[/tex] = 0
[tex]B_{f}[/tex]= - 4T
On the front surface, the magnetic field strength is [tex]B_{f}[/tex] = - 4T.
Because it is negative, it indicates that the magnetic field is entering the front surface.
For more such questions on Magnetic field :
brainly.com/question/28104888
#SPJ4
a small object of mass m on the end of a light cord. what is the tension in the cord when the object is at the lowest point of its swing
The tension in the cord when the object is at the lowest point of its swing is 3 mg.
The complete question is in the attachment. The small object moves from point A to point B. According to the law of conservation of energy
KE a + PE a = KE b + PE b
0.5 m₁ v₁² + m₁ g h₁ + 0.5 m₂ v₂² + m g h₂
At point A(0.5 × m × 0²) + (m × g × r) = (0.5 × m × v₂²) + (m × g × 0)
0 + mgr = 0.5 mv₂² + 0
v₂² = 2gr
[tex]v_2 \:=\: \sqrt{2gr}[/tex]
The object moves according to uniform circular motion. There is the centripetal force that works in the system. The forces acting on the object are weight force and tension force. According to Newton's second law for circular motion
Fc = mα
T - w = mv²/R
T - mg = mv²/R
m = the mass v = the velocity at the lowest point = v₂R = the radius = rg = the acceleration due to gravityT = mv₂²/r + mg
T = (m × 2gr ÷ r) + mg
T = 2mg + mg
T = 3 mg
Learn more about centripetal force here: https://brainly.com/question/29266223
#SPJ4
q2. is it possible for the particle undergoing tunneling to be found within the barrier, rather than on either side of it?
Yes, it is possible for a particle to be found within the barrier while undergoing tunneling.
This phenomenon is known as quantum tunneling. Quantum tunneling occurs when a particle tunnels through a barrier that is normally too high to be crossed by the particle's kinetic energy. This occurs due to the wave-like nature of particles, which allows them to go through barriers that are otherwise impenetrable.
The wave-like nature of particles allows them to penetrate the barrier, often with a probability greater than zero. This phenomenon is used in many applications in science and technology, such as in quantum computing, where quantum tunneling is used to tunnel qubits through the barrier of a logic gate.
For more questions like Quantum tunneling click the link below:
https://brainly.com/question/29855444
#SPJ4
in a photoelectric effect experiment at a frequency above the cut-off frequency, the number of electrons ejected is proportional to
In a photoelectric effect experiment at a frequency above the cut off frequency the number of electrons ejected is proportional to the number of photons that hit the sample per second.
The photoelectric current is measured in relation to the intensity of the incident radiation at a specific frequency and potential between the metal plate and collector. It demonstrates that incident radiation intensity and photoelectric current are inversely correlated. The photoelectric current shows how many photoelectrons are released each second.
The idea of light as a wave cannot be used to explain the photoelectric effect. However, the particle nature of light, which can be visualized as a stream of electromagnetic energy-containing particles, can provide an explanation for this phenomenon. These particles of light are called as photons.
We can learn more about photoelectric effect here:
https://brainly.com/question/26465043#
#SPJ4
a sky diver jumps from a plane traveling horizontally at 55 m/s at an altitude of 1500 m. when she reaches an altitude of 425 m, she is falling at a terminal velocity of 52 m/s. how much work has been done by air resistance during this time?
The work that has been done by air resistance during this time is 55800 k m²/s².
To determine the work done by air resistance during the skydiver's fall, we can use the equation:
W = F × d
where W is the work, F is the force of air resistance, and d is the distance traveled.
The force of air resistance on the skydiver is given by the equation:
F = k × v²
where k is the drag coefficient, which is a measure of the resistance of the air to the movement of the object, and v is the velocity of the skydiver.
To determine the work done by air resistance, we need to determine the distance traveled by the skydiver and the force of air resistance at each point in her fall. The skydiver falls from an altitude of 1500 m to an altitude of 425 m, a distance of 1075 m.
At an altitude of 1500 m, the skydiver is falling at a terminal velocity of 52 m/s. Plugging these values into the equation for the force of air resistance gives us:
F = k × v² = k × (52 m/s)²
To determine the work done by air resistance at this point in the skydiver's fall, we can plug the value of F and the distance traveled into the equation for work:
W = F × d = (k × (52 m/s)²) × 1075 m = 55800 k m²/s²
The work done by air resistance at this point in the skydiver's fall is 55800 k m²/s².
At an altitude of 425 m, the skydiver is falling at a terminal velocity of 52 m/s. Plugging these values into the equation for the force of air resistance gives us:
F = k × v² = k × (52 m/s)²
To determine the work done by air resistance at this point in the skydiver's fall, we can plug the value of F and the distance traveled into the equation for work:
W = F × d = (k × (52 m/s)²) × 1075 m = 55800 k m²/s²
The work done by air resistance at this point in the skydiver's fall is 55800 k m²/s².
To determine the total work done by air resistance during the skydiver's fall, we can add the work done at each point in the fall:
W_total = W_1500m + W_425m = 55800 k m²/s² + 55800 k m²/s² = 111600 k m²/s²
The total work done by air resistance during the skydiver's fall is 111600 k m²/s².
Note that this calculation assumes that the drag coefficient k is constant throughout the skydiver's fall. If the drag coefficient changes during the fall (for example, if the skydiver deploys a parachute), additional calculations will be needed to determine the total work done by air resistance.
Learn more about the work done at
https://brainly.com/question/13662169?referrer=searchResults
#SPJ4
if an object doubles its luminosity in 10 hours, how large can the emitting source of light be?
If an object doubles its luminosity in 10 hours, emitting source of light can be about 10 light hours across.
Luminosity, L, is a measure of the total amount of energy radiated by a star or other celestial object per second. This is therefore the power output of a star. A star's power output across all wavelengths is called its bolometric luminosity. A star's luminosity can be determined from two stellar characteristics: size and effective temperature. The difference between luminosity and apparent brightness depends on distance.
Since, the luminosity of the object doubles in 10 hours, emitting source of light can be about 10 light hours across.
learn more about luminosity:
https://brainly.com/question/14140223
#SPJ4
when the first astronauts travel to mars they will be traveling for long periods of time with no external time cues. you would predict that the circadian rhythms for these astronauts would
Based on the provided information, it can be predicted that the circadian rhythms for the astronauts would be drift toward a slightly longer cycle. (Option A)
A circadian rhythm, also known as circadian cycle, refers to a natural, internal process that regulates the sleep–wake cycle and is repeated roughly every 24 hours. It can refer to any process that originates within an organism and responds to the environment. These natural processes respond primarily to light and dark and affect most living things. A zeitgeber refers to any external cue or environmental cue that synchronizes an organism's biological rhythms such as circadian rhythm, usually naturally occurring and serving to entrain to the Earth's 24-hour light/dark and 12-month cycles. Circadian rhythms that are expressed in the absence of any 24-hour signals from the external environment are called free running, which are slightly longer cycle than usual. Hence, in the absence of external cue, the circadian rhythms for the astronauts would drift toward a slightly longer cycle.
Note: The question is incomplete as it is missing options which are a. They would drift toward a slightly longer cycle. b. They would become sporadic and show no definite pattern. c. They would stay synchronized with a 24-hour cycle. d. They would become synchronized with the light pattern around Mars.
Learn more about Circadian rhythm:
https://brainly.com/question/1400580
#SPJ4
a boat floating in fresh water displaces a volume of water with a weight of 16,000n. if it floats in saltwater with density 1.17 times that of water, then the weight of saltwater displaced (in newtons) is:
Archimedes, on the other hand, states that the amount of water (equal to 16000N) will be reduced by 3% since seawater has a specific gravity that is roughly 3% higher than freshwater.
How much water does a boat move when it is in the water?900 000 metric tonnes of water are removed by it. 300,000 elephants would be the equal. The air inside a ship is significantly less dense than water. It floats because of that. The key concept is that the body "floats," which is the underlying presumption in this situation. According to the Archimedes Principle, for this body, vessel, or whatever it may be to float, it must move an equal amount of water.
To know more about Archimedes Principle visit:-
https://brainly.com/question/13106989
#SPJ4
describe how you could use a ray diagram to determine the location of the image of an extended object. such as a pencil.
A ray diagram is a tool used by physicists to explain or predict the behavior of beams of light as they pass through objects such as glass blocks or lenses.
A ray diagram is a diagram that strains the route that light takes so as for a person to view a factor in the photograph of an object. In the diagram, rays are drawn for the incident ray and the meditated ray.
Ray diagrams help us hint at the course of the light for the man or woman to view a point on the photograph of an object. The Ray diagram makes use of lines with arrows to symbolize the incident and reflected ray. It also helps us trace the direction in which the mild travels.
A mild ray is a line that is perpendicular to the mild's wavefronts; its tangent is collinear with the wave vector. light rays in homogeneous media are instant. They bend at the interface between two distinctive media and may be curved in a medium wherein the refractive index modifications.
Learn more about ray diagrams here:-https://brainly.com/question/23536244
\#SPJ4
what inductance must be connected to a 17 pf capacitor in an oscillator capable of generating 550 nm (i.e., visible) electromagnetic waves? comment on your answer.
The inductance that must be connected to a capacitor is 5* 10⁻²¹ H.
If f is the frequency and λ is the wavelength of an electromagnetic wave, we know the relation between them as v = f * λ
The frequency is same as the frequency of oscillation of the current in the LC circuit of the generator.
f = 1/(2π* √LC)
where, C is the capacitance
L is the inductance
So, λ/(2π* √LC) = c
Given that, λ = 550* 10⁻⁹ m
C = 17 * 10⁻² F
c is the speed of light
Making L as subject, we have
L = λ²/(4π² C* c²) = (550* 10⁻⁹)² / [4π²(17 * 10⁻²) (3* 10⁸)²] = 5* 10⁻²¹ H
To know more about inductance:
https://brainly.com/question/13112375
#SPJ4
what is the minimum amount of hydrogen gas, in grams, required to completely hydrogenate 18.0 kg of 2-butene?
The minimum mass of hydrogen gas required is 641.64 grams.
Hydrogenation is a chemical reaction between molecular hydrogen and another compound or element, usually in the presence of a catalyst such as nickel, palladium, or platinum. This process is commonly used to reduce or saturate organic compounds.
2-butene = C4H8
maximum hydrogenation = C4H10
then we require 2 H, that is 1 mol ofH2
2-butene +H2 --> butane
MW of butene = 56.106
mol of butene = mass/MW = 18000/56.106 = 320.8213mol
then we require 1:1 ratio
320.8213 mol of H2
mass = mol*MW = 320.8213*2 = 641.64 g of H2
Learn more about Hydrogenation here:
https://brainly.com/question/12833896
#SPJ4
Resistors R1, R2, R3, and R4 are arranged in a circuit as shown in the figure above. The direction of positive currents I1, I2, I3, and I4 through the resistors are shown. (i.e., negative current values correspond to currents in the opposite direction to that shown above). The values for the resistors and the batteries in the circuit are: R1 = 100 ?, R2 = 200 ?, R3 = 30 ?, R4 = 400 ?, V1 = 4 V, and V2 = 12 V.What is the value of I2, the current through R2? (remember I2 is a signed number) I2 = ?
The current of the resistor 2 from a circuit of four resistors is calculated to be 2 A.
A resistor is an electronic component that is designed to reduce the flow of electricity in a circuit. It is typically used to limit the amount of current flowing through a circuit, and it can also be used to regulate the voltage in a circuit. Resistors are typically composed of a conductive material, such as carbon, metal, or ceramic, and they are available in a variety of shapes and sizes.
I₂ is found using Ohm's Law. I₂ = (V₂ - V₁)/R₂, where V₂ and V₁ are the voltage across R₂ in the same direction as current I₂, and R₂ is the resistance of resistor 2. Substituting the given values gives
I₂ = (12 - 4)/200 = 8/200 = 0.04 A = 2 A.
To know more about current:
https://brainly.com/question/30115579
#SPJ4
An Lois Lane weighs 480 N on Earth. Superman takes Lois Lane to the planet Krypton to meet the parents. Krypton has a mass and diameter each 10 times that of Earth. Determine her weight at a distance of two Kryptonian radii above that planet.
Krypton was soon revealed to have formerly been a planet like Earth, only older by eons and possessing. All the advantageous advancement that entailed, starting in the Superman comic strip (though the downside was the hint that Krypton exploded due mainly to old age).
What Kryptonian radii above that planet?Superman's ability to defy gravity is also explained by another school of thinking, although with a slight variation. Krypton was a gigantic planet with a gravity so strong that typical humans would be crushed beneath its gravitational pull because it was about 1000 times bigger than Earth.
Therefore, Krypton, which was about 1.5 times the size of Earth and was located 50 light-years from the Sun, orbited the red star Rao.
Learn more about planet here:
https://brainly.com/question/2487470
#SPJ1
a racecar traveling at a constant speed of 50 m/s drives around a circular track that is 500 m in diameter. what is the magnitude of the radial acceleration of the car?
The magnitude of the radial acceleration of the car 10m/sec²
Given Velocity v = 50m/sec
Diameter D = 500m
Radius r = 250m
Acceleration a = [tex]v^{2}[/tex]/r = 2500/250 = 10m/sec²
The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. In vector quantities, accelerations exist (in that they have magnitude and direction). [1] [2] The direction of the net force that is acting on an object determines its acceleration. Newton's Second Law[3] states that the sum of the effects of two causes determines the size of an object's acceleration:
The net balance of all external forces acting on that thing — magnitude is directly proportional to this net resulting force; that object's mass, depending on the materials out of which it is built — magnitude is inversely proportional to the object's mass.
Meter per Second Squared (m/s2) is the SI unit for acceleration. displaystyle, mathrm, tfrac, ms2, and
Learn more about Acceleration here:
https://brainly.com/question/12550364
#SPJ4
with the use of an example, fully and clearly discuss your understanding of the concepts of reversibility and irreversibility in a thermodynamic system. why do we study reversible thermodynamic systems?
The reversible process is the one that can be reverted back and an reversible process is the one that cannot back towards initial state.
In the field of thermodynamics the processes are defined as reversible or Irreversible.
Practically speaking, process is that one which occurs slowly slowly and reversible process is the one which occurs suddenly. Irreversible processes cannot be reverted back and reversible processes can be reverted back.
An example of reversible process is the change of state of water and an example of Irreversible process is the change in colour often iodine containing sample at the addition of starch.
We study the reversible processes in order to understand the thermodynamical perspective of the process and the energy change associated with the system.
To know more about thermodynamics, visit,
https://brainly.com/question/13059309
#SPJ4
The escape velocity from planet A is double that forplanet B. The two planets have the same mass. What is theratio of their radiation, rA/rB?
The ratio of their radius [tex]\frac{r_A}{r_B}[/tex] = 1/4 .
What is escape velocity?Escape velocity is the speed at which the sum of kinetic and gravitational potential energy of an object equals 0.
[tex]v_e_s_c[/tex] = [tex]\sqrt{\frac{2GM}{r} }[/tex]
where [tex]v_e_s_c[/tex] is escape velocity G is universal gravitational constant and M is mass of the object and r is distance of object.
let [tex]v_A[/tex] and [tex]v_B[/tex] be the escape velocity of the of planet A and planet B
so [tex]v_A = \sqrt{\frac{2GM}{r_A} }[/tex] -----(i)
and [tex]v_B=\sqrt{\frac{2GM}{r_B} }[/tex] ----(ii)
given [tex]\frac{v_A}{v_B}[/tex] = 2
=> [tex]\frac{v_A^2}{v_B^2}[/tex] = 4
=> [tex]\frac{r_B}{r_A}[/tex] = 4
so [tex]\frac{r_A}{r_B}[/tex] = 1/4
To know more about escape velocity click on below link:
https://brainly.com/question/14297933#
#SPJ4
Ebo throw the ball at an initial velocity of 18m/ but thi time at an angle of 53 to the ground
a. Work at the velocity in component vector form
b. Why will the ball pend alonger time in the air than it did before. C. Calculate the range of the ball
The velocity is 6.52 m/s, and the velocity in component vector form is vcos.
"The pace at which an item changes its location" is described by a vector number known as velocity. Consider someone walking swiftly, one step ahead, one step back, and beginning each stride in the same place. Velocity is measured as a vector quantity. As a result, velocity is aware of direction. When calculating an object's velocity, the direction must be considered. A speed of 55 miles per hour does not provide enough information. To accurately represent the velocity of an object, the direction must be taken into account. Simply simply, the direction of the velocity vector describes the object's motion.
velocity in vector form
= vcos vector form
=18cos53 v
=16.52 m/s
Learn more about velocity here-
https://brainly.com/question/18084516
#SPJ4
a particle has potential energy u(x)=x+sin((2rad/m)x) as a particle moves over the range 0m≤x≤πm.
A particle has potential energy U(x)=x+sin ((2 rad/m) x) as a particle moves over the range 0 m \leq pi m The equilibrium positions in this range will be a=(pi/3), x=(2pi/3).
Potential energy and equilibrium are related in that the body's potential energy is lower in such an equilibrium.
In this case, the state generates a force that does not resist the displacement when a little distance displaces the body.
When the body shifts from its initial posture in such a situation.
Potential energy is a form of stored energy that is dependent on the relationship between different system components.
When a spring is squeezed or extended, its potential energy increases.
If a steel ball is lifted above the ground as opposed to falling to the ground, it has higher potential energy.
A particle has potential energy u(x)=x+sin 2 x
Now differentiating with respect to x.
[tex]\Rightarrow \frac{d u}{d x}=1+2 \cos 2 x \\\\[/tex]
for equilibrium point
[tex]\frac{d u}{d x}=0 \\\\\Rightarrow (1+2 \cos 2 x)=0 \\\\\Rightarrow \cos 2 x=-\frac{1}{2}[/tex]
[tex]$$\begin{aligned} \Rightarrow \cos 2 x=\cos \left(\pi-\frac{\pi}{3}\right) \\\Rightarrow 2 x=\frac{2 \pi}{3} \Rightarrow x=\frac{\pi}{3} \\\cos 2 x=\cos \left(\pi+\frac{\pi}{3}\right) \\\Rightarrow 2 x=\frac{4 \pi}{3} \Rightarrow x=\frac{2 \pi}{3}\end{aligned}$$[/tex]
Hence, a=(Pi/3), x=(2pi/3) is correct,
For more questions on Equilibrium: https://brainly.com/question/19340344
#SPJ4
The correct questions should be:
A particle has potential energy U(x)=x+sin ((2 rad/m) x) as a particle moves over the range 0 m [tex]\leq[/tex] pi m.
Where are the equilibrium positions in this range?
Check all that apply.
x=pi/6 m
x=pi m
x=(pi/2) m
x=(pi/3) m
x=(2/3) pi m
the fruits are tossed in the air and spin back to the ground acting like small helicopters, which part of the fruit allows for this
The wall of a fruit, advanced from the ovary wall. The ripened and variously changed partitions of a plant ovary.
Consisting of the outer exocarp, significant mesocarp and internal endocarp, that is the wall of a plant fruit that develops from the ovary wall.
Pericarp: ↑ The a part of the fruit that surrounds the seed(s). The pericarp is shaped via way of means of 3 wonderful layers: exocarp, mesocarp, and endocarp.
Dehiscence: Splitting open at adulthood which will launch its contents (example: the fruit splits to launch the seeds). Children withinside the Southeastern United States play with pink maple culmination (Acer rubrum). The culmination are tossed withinside the air and spin again to the floor, performing like small helicopters. the culmination are tossed withinside the air and spin again to the floor performing like small helicopters, which a part of the fruit permits for this.
Read more about the fruits;
https://brainly.com/question/28805073
#SPJ4
at what point does the terminal side of the angle 7π4 in standard position intersect the unit circle?
At point [tex](\frac{\sqrt{2}}{2} ,- \frac{\sqrt{2}}{2} )[/tex] the terminal side of the angle [tex]\frac{7\pi}{4}[/tex] in standard position intersect the unit circle.
A unit circle is divided into four quadrants, each of which has an angle of 90°, 180°, 270°, and 360° (in degrees) or π/2, π. 3π/2, and 2π (in radians) respectively.
A unit circle angle is always measured from the positive x-axis, with the vertex at the origin. Its initial side is on the x-axis, while the terminal side is formed by the ray that begins at the origin and coincides with the point on the unit circle. When an angle is measured anticlockwise from the x-axis, it has a positive value.
Quadrant 1 – (0 – 90°) : X is positive, Y is positive
Quadrant 2 – (90° – 180°) : X is negative, Y is positive
Quadrant 3 – (180° – 270°) : X is negative, Y is negative
Quadrant 4 – (270° – 360°) : X is positive, Y is negative
Given,
The radius of circle = 1 unit
The terminal side of angle = \frac{7\pi}{4}
[tex]\frac{7\pi}{4}=\frac{7*180}{4}=315\textdegree[/tex]
here, the angle 315° lies in the fourth quadrant, and we know that in 4th quadrant the x is positive and y is negative.
So, from the given options, the point [tex](\frac{\sqrt{2}}{2} ,- \frac{\sqrt{2}}{2} )[/tex] lies in the 4th quadrant.
To learn more about quadrants refer here
https://brainly.com/question/7196312
#SPJ4
Your question is incomplete, here is the complete question.
At what point does the terminal side of the angle 7π/4 in standard position intersect the unit circle?
a) (-√2 / 2, -√2 / 2)
b) (-√2 / 2, √2 / 2)
c) (√2 / 2, -√2 / 2)
d) (√2 / 2, √2 / 2)
Which of the following best describes an electromagnet?
Need a Hint?
A) permanent magnet
B) insensitive to electrical currents
C) unchanging magnetic properties
D) temporary magnet
An Electromagnet can be best described as a temporary magnet.
An Electromagnet is called a non permanent magnet or a temporary magnet.
It is called so because of its property of getting magnetized and demagnetized.
Electromagnet behaves like a magnet only in the presence of the electric current their magnetic properties disappear as soon as the current in them stops.
Electromagnet are used in various devices like headphones and loudspeakers, induction cookers, data storage devices MRI machines and magnetic locks.
To know more about electromagnets, visit,
https://brainly.com/question/12555869
#SPJ4
if a person weighs 600 n and the surface area of the bottom of both feet combined is 200 cm2, what is the pressure
The pressure exerted by the person is found to be 3 N/cm².
The physical force applied to an object is referred to as pressure. It is the force that is dispersed over a unit area per unit of time perpendicular to the surface of an object. The formula used to calculate pressure is P=F/A where P is the pressure, F is force, and A is the area.
Given the force is 600 N and the area is 200 cm².
Then, the pressure is calculated as follows,
P = F/A
P = 600 N/200 cm²
P = 3 N/cm²
The answer is 3 N/cm².
To know more about pressure:
https://brainly.com/question/28396651
#SPJ4
workers expect inflation to fall from 4% to 1% next year. as a result, this should
Workers expect inflation to fall from 4% to 1% next year. as a result, this should Shift the short-run aggregate supply curve to the right.
Option (B) is the correct choice.
The SRAS curve demonstrates that the amount of real GDP that will be generated in an economy grows as the price level rises as you move along the SRAS.
A movement to the right indicates an increase in the SRAS.
In the near run, decreasing wages, increasing the stock of physical resources, lowering inflation, and advances in technology would move the aggregate supply curve to the right.
The short term aggregate supply will move to SRAS2 on the left if businesses and labour anticipate price increases.
For more question on SRAS Curve
https://brainly.com/question/26875448
#SPJ4
The complete question may be:
Workers expect inflation to fall from 4% to 1% next year. As a result, this should
A) shift the short-run aggregate supply curve to the left.
B) shift the short-run aggregate supply curve to the right.
C) move the economy up along a stationary short-run aggregate supply curve.
D) move the economy down along a stationary short-run aggregate supply curve.
a ball is thrown upward. at a height of 10 meters above the ground, the ball has a potential energy of 50 joules (with the potential energy equal to zero at ground level) and is moving upward with a kinetic energy of 50 joules. air friction is negligible. the maximum height reached by the ball is most nearly: group of answer choices 40 m
The maximum height reached by the ball thrown upwards with kinetic and potential energies specified is nearly 20 m.
Utilising the principle of energy conservation, we can solve this problem.
While the KE is largest at the surface and 0 at the top, the PE is zero at the surface and maximum at the top.
From the above data,
PE = mgh = 50 J ----(1)
m g* 10 = 50
m* g = 50/10
m* g = 5
The total energy at that point = PE + KE = 50 + 50 = 100 J
The PE will therefore be 100 J at the highest point.
m g H = 100 J , H is the needed height
Using the above-mentioned value of m* g, we have
H = 100/5
H = 20 m
So, the maximum height reached by the ball is 20 m.
To know more about height:
https://brainly.com/question/15183818
#SPJ4
green light strikes a metal and electrons are ejected. yellow light results in no electrons. which color light would you expect to produce electron ejection in this metal?
The relationship between light frequency and wavelength is inverse. No matter how powerful, yellow light simply lacks the necessary energy per photon to excite any electron sufficiently to liberate it from the metal.
Since yellow and red light have longer wavelengths than green light and lower frequencies than green light, when yellow or red light strikes metal, no photoelectrons are produced. Yellow light makes a green thing appear green. Under cyan light, a red object seems to be black. Cyan light makes a blue thing appear blue. Red and green light are also present in yellow light, which likewise reflects both colors.
Learn more about wavelength here-
https://brainly.com/question/13533093
#SPJ4
A(n) 71.1 kg astronaut becomes separated
from the shuttle, while on a space walk. She
finds herself 58.5 m away from the shuttle
and moving with zero speed relative to the
shuttle. She has a(n) 0.681 kg camera in her
hand and decides to get back to the shuttle
by throwing the camera at a speed of 12 m/s
in the direction away from the shuttle.
How long will it take for her to reach the
shuttle? Answer in minutes.
Answer:
10.347
Explanation: