(Figure 1) shows a thin liquid film bounded on the right side by a sliding wire that is attached to a spring with spring constant 0.50 N/m. The spring is stretched by 1.4 cm. Figure 1 of 1 < > 0.50 N/m 6.0 cm Mai W Part A What is the liquid's surface tension in mN/m? Express your answer in millinewtons per meter. || ΑΣφ ? 7= mN/m

A satellite with mass M travels at a constant velocity v in a circle with radius R. Then its centripetal acceleration is constant, its tangential acceleration is zero, and its angular speed is v/R.

The earth launches satellites into orbit around it. To place the satellite in the desired orbit, many rockets are launched from the satellite at the appropriate time. The satellite will continue to move in an orbit under the pull of the earth's gravity once it has been placed in the desired orbit and is moving at the appropriate speed for that orbit.This satellite has potential energy because it is in a gravitational field and has kinetic energy since it circles around the planet. A satellite's kinetic energy is equal to half its gravitational energy, as shown by, Gravitational energy has a value of GMm/r, hence kinetic energy has a value of GMm/2r and is positive.

To learn more about angular speed click here https://brainly.com/question/14663644

#SPJ4

The function of θ in term of s is θ = arctan(s/75).

The value of θ is s is 900 and 1500 are 85,24 degrees and 87.14 degrees respectively.

Find the diagram attached. From the diagram, we are given the following:

Opposite = s

Adjacent = 75

According to SOH CAH TOA identity;

tanθ = opp/adj

tanθ = s/75

θ = arctan(s/75)

Hence the function of θ in term of s is θ = arctan(s/75)

b) If s=900meters

θ = arctan(900/75)

θ = 85,24 degrees

If s = 1500

θ = arctan(1500/75)

θ = 87.14 degres

Hence the value of θ is s is 900 and 1500 are 85,24 degrees and 87.14 degrees respectively.

Learn more on SOH CAH TOA here;  brainly.com/question/20734777

#SPJ4

The  number of theoretical plates are 1757.

What is partition coefficients  ?

The ratio of a compound's equilibrium concentrations in a combination of two immiscible liquids is known as a partition coefficient (P) or distribution coefficient (D). This ratio so compares the solubilities of the solute in these two liquids.

What is resolution  ?

Resolution of the vector is the process of dissolving a vector into its parts. The components will result in the same vector when combined together vectorially. In general, we divide a vector into three parts: the x-component, the y-component, and the z-component. y-component is the name given to a component that runs along the y-axis.

The ratio of the partition coefficients  of the two components ( ∝)

K ₂/ K₁ = 0.18/ 0.15= 1.2

The relationship between no. of plates and resolution is ask follows

R= [tex]\sqrt{N}[/tex]/ 4 (∝- 1/∝) (K₂/K₂+1)

Calculate K₂ by using K₂ and Vsm as follows

K₂= K₂ ( Vs/ Vm )

18*1/3= 6

calculate the number of plates ( N) as follows

R= [tex]\sqrt{N}[/tex]/4   (∝- 1/∝)  (K₂/K₂+1)

[tex]\sqrt{N}[/tex]= R*4/(∝- 1/∝)  (K₂/K₂+1)

N = ( r*4/ (∝- 1/∝)  (K₂/K₂+1))²= [1.5*4/ ( 1.2-1/ 1.2) ( 6/ 6+1)]²= [6/(0.167) (0.857)]² = 1757

Therefore, number of theoretical plates are 1757.

Learn more about partition coefficients from the given link.

https://brainly.com/question/16953107

#SPJ4

Answer:

2.5 [kg].

Explanation:

1. initial formula is:

E=m*g*h, where E - energy described in the condition, m - required mass, h - height and g≈10 [N/kg];

2. according to the formula above:

[tex]m=\frac{E}{gh}; \ = > \ m=\frac{5000}{200*10}=2.5[kg].[/tex]

Answer:

Below

Explanation:

Vertical speed = at = 9.81 m/s * 3 = 29.4 m/s

For 3 seconds it travels 5 m/s horizontally = 15 meters    (NOT m/s)

The induced emf is equal to 0.025v. If the outward magnetic flux rises, the current must go counterclockwise. When the flux coupling with a conductor or coil changes, an electromotive force, or EMF.

There are two approaches to get this change in flux: by statically or dynamically inducing emf across a certain area. For instance, the magnetic flux density is lower if fewer magnetic lines cover a large region of cross section. Knowing the magnetic flux also enables us to make an educated guess about the magnitude of the magnetic field in a particular area. The surface integral of the normal component of the magnetic field is used to define the magnetic flux across a surface (B)

e = Pi*r^2(B2 - B1)/t

e = pi*81/4*0.50/130 *10

e = 0.025v

current must be clock wise

Learn more about magnetic flux here

https://brainly.com/question/13089711

#SPJ4

The 5 galaxies with redshifts less than 0.001 are Ages, cosmos , hypernova , Gama , VVDS and greater than 0.001 are Devils, achne, simar , vipers, MGC, 2SLAQ,QCD, SAPM,AARS and ESP.

To study more about Andromeda galaxy -

https://brainly.com/question/1104397

#SPJ4

The final speed of the car in terms of the initial speed v of the truck is 3v/2.

The final speed of the car in terms of the initial speed v of the truck is calculated as follows;

Apply the principle of conservation of linear momentum as follows;

m₁u₁ + m₂u₂ = m₁v₁  +  m₂v₂

where;

let the mass of the truck = m

then, mass of the car = m/3

let the final speed of the truck, v₁ = v/2

The final speed of the car is calculated as follows

m(v) + (m/3)(0) = (m)(v/2) + (m/3)(v₂)

mv = (mv)/2 + (mv₂)/3

6mv = 3mv + 2mv₂

6mv - 3mv = 2mv₂

3mv = 2mv₂

v₂ = 3mv / 2m

v₂ = 3v / 2

Learn more about final speed here: https://brainly.com/question/25905661

#SPJ1

Option D-Refractive index is inversely proportional to wavelength.

Refractive index, often known as the index of refraction, is a measurement of the way a light beam bends when it travels through different media. The refractive index n is determined by dividing the sine of the angle of incidence by the sine of the angle of refraction, i.e., n = sin I / sin r, assuming that I is the angle of incidence of a ray in vacuum (angle between the incoming ray and the normal, which is perpendicular to the surface of a medium). Additionally, the refractive index is determined by dividing the speed of a specific wavelength of light in vacuum, c, by that same wavelength's speed, v.

Learn more about Refractive index here:

https://brainly.com/question/9896008

#SPJ4

The deepest portion of the Sun that we may directly witness is the photosphere. It extends roughly 250 miles (400 km) above the solar disk's visible surface at its core.

The distances from the inner layers, which are measured in terms of distance from the sun's core, and the outer layers, which are measured in terms of distance from the sun's surface, are shown on this diagram as approximations for each layer. The Core, Radiative Zone, and Convection Zone are the inner layers. The Photosphere, Chromosphere, Transition Region, and Corona make up the outer layers.

To learn more about Photosphere please click on below link

https://brainly.com/question/29127538

#SPJ4

The distance between the two points on a loudspeaker that initially emits a 110 Hz tone with a sound speed of 340 m/s = 18.54 m.

Traveling waves are waves that have a fixed amplitude. Meanwhile, a stationary wave is a wave whose amplitude changes at every point.

The phase difference is the difference in the phases of the waves or stages of the waves. Mathematically, the phase difference is formulated as follows:

Δφ = Δx/λ

We have,

The frequency =  (110 Hz) ⇒ f

The speed of sound  = 340 m/s ⇒ v

The phase difference between two points =  6.0 rad ⇒ Δφ

Determine the wavelength first,

λ = v/f

= 340/110

= 3.09 m

So, the distance between these two points:

Δφ = Δx/λ

(6.0) = Δx/3.09

Δx = 18.54 m

Learn more about wavelength here: https://brainly.com/question/29800252

#SPJ4

The two primary absorption bands are connected to changes in the energy levels of electrons. In comparison to the band in the region corresponding to longer wavelengths, the band in the shorter wavelength region has a lower absorption.

Plants have a pigment called beta-carotene that gives them colour. The Latin term for carrot is source of the name beta-carotene. Fruits and vegetables that are yellow or orange derive vibrant colors from it. Additionally, the foods like margarine are colored with beta-carotene.

Beta-carotene transforms into vitamin A in the body (retinol). For clear eyesight and healthy eyes, a robust immune system, and healthy skin and mucous membranes, we require vitamin A. Vitamin A in large levels can be poisonous, but your body only makes as much of the vitamin from beta-carotene as is required. In light of this, beta-carotene is regarded as a secure source of vitamin A.

For smokers, meanwhile, consuming too much beta-carotene can be harmful. It is safe to consume large doses of vitamin A or beta-carotene through food rather than supplements.

To learn more about Beta-carotene visit:

https://brainly.com/question/13631581

#SPJ1

If the speed of a particle is doubled, its momentum will also be doubled, because momentum is directly proportional to the speed of the particle. In other words, the momentum of a particle is equal to its mass times its velocity, so if the velocity is doubled, the momentum will also be doubled.

The kinetic energy of a particle is also directly proportional to the square of its speed, so if the speed is doubled, the kinetic energy will increase by a factor of four. This can be expressed mathematically as:

Kinetic energy = (1/2) * mass * velocity^2

If the velocity of a particle is doubled, the kinetic energy will increase by a factor of four, because velocity^2 will increase by a factor of four.

So to summarize, if the speed of a particle is doubled, its momentum will be doubled, and its kinetic energy will increase by a factor of four.

The maximum theoretical efficiency possible for a heat engine operating between a reservoir in which ice and water coexist is 27 %.

Heat engines often operate at around 30% to 50% efficiency, due to practical limitations. It is impossible for heat engines to achieve 100% thermal efficiency, according to the Second law of thermodynamics.

The Carnot cycle is a theoretical power cycle and is used for showing the theoretical maximum of a heat engine.

The energy consumption, theoretical value is the value when computers operate following the power saving settings on individual computers and the sample settings.

Learn more about theoretical efficiency for a heat engine here:- https://brainly.com/question/15449566

#SPJ4

If a monkey floating in outer space throws his hat away, the hat and the monkey will both move away from each other, but at different speeds.

Assuming that the floating monkey is in deep space away from any celestial bodies with a strong gravitational force and the hat is outside of the spacesuit and less massive than the monkey, then the hat and the monkey both will move away from each other, but at  different speeds. On the basis of law of attraction, when the monkey threw the hat forward, the hat would push the monkey back.

As the monkey is heavier compared to the hat, its acceleration would be smaller than that of a hat which is less massive.

Due to this, the monkey moves back slower compared to that of a hat which moves forward at a greater speed.

They cannot move away from each other at the same speeds unless the mass of both the bodies is same. There is no friction in space so, there is nothing that would slow down their motion or let them stop unless they collide with other bodies in space.

The question is incomplete. The missing options are A) move away from each other, but at different speeds B) move away from each other at same speed C) move a short distance and then slow down D) move a short distance and then go faster E) come to a stop after few minutes

To know more about space:

https://brainly.com/question/8746972

#SPJ4

Sphere, disk, hoop due to Torque.

Torque = I α if a man and radius is same α will be more for lesser moment of theta.

Is = 2/5 MR², Iloop = MR², Id = 1/2MR²

The order is

Is < Id< Ih

Sphere, disk, hoop.

rFsin() is the definition of torque. Or, to put it another way, torque is the cross product of the distance vector (the distance between the pivot point and the point at which force is applied) and the force vector, where 'a' is the angle between r and F. The torque is a pseudovector in three dimensions and is determined for point particles by the cross product of the force vector and the position vector (also known as the distance vector). The force applied, the lever arm vector[2] connecting the torque measurement point to the force application point, and the angle between the force and lever arm vectors all play a role in determining how much torque a rigid body can generate.

Learn more about Torque here:

https://brainly.com/question/6855614

#SPJ4

The magnitude of your weight on the surface of Jupiter is 2,605.2 N.

The magnitude of your mass which does not change on both Earth and Jupiter is calculated from your weight on Earth by applying Newton's second law of motion as follows;

W = mg

where;

m = W / g

m = 982 N / ( 9.8 m/s²)

m = 100.2 kg

The magnitude of your weight on the surface of Jupiter is calculated as follows;

W = mg

where;

W = 100.2 kg x 26 m/s²

W = 2,605.2 N

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

Angular speed , wi = 91 rpm

wi = 91 * 2pi/60 rad/s

wi = 9.11 rad/s

Frictional force , f = 0.20 * 16 = 3.2 N

part a) let the angular acceleration is a

Using the second law of motion

0.50 * 85 * 0.31^2 * a = 3.2 * 0.31

solving for a

a = 0.242 rad/s^2

The angular acceleration is 0.242 rad/s^2

b) Let the angle is theta

theta = 9.11^2/(2 * 0.242)

theta = 170 radian = 27.2 turns

The number of turns is 27.2

Angular velocity is the speed of an object in rotational motion. The distance traveled is denoted by θ and is measured in radians. Duration is measured in seconds. Angular velocity is therefore expressed in radians/second, or rad/s. Angular velocity is measured in radians per unit of time because it is the rate at which the central angle swept by an object changes as it moves around a circle.

Learn more about Angular speed here:- https://brainly.com/question/6860269

#SPJ4

The Kinematics of Spring Motion is 73730 N

Kinematics of Spring Motion:

An elastic spring abides by Hooke's law, which states that the force needed to stretch or compress a spring is inversely proportional to the length of the spring in question. Simple harmonic motion is performed by a mass that is connected to a spring.

According to Hooke's law, compression in spring is related to applied force as following.

F applied = -kx

Where,

k = force constant

x = compression in spring

Step 1)First, we will determine force constant of spring

k = 730/ (0.40*10-3)

k = 1825000 N/m

Step 2)We will determine compression in bathroom scale when man jumps on the scale.

m g (H+x) = 0.5 k x2

730 * (2.0 + x) = 0.5 * 1825000 * x2

0.0008 * (2.0 + x) = x2

x2 - 0.0008 x - 0.0016 = 0

x = 0.04040 m,   -0.03(rejected since negative)

Hence,

F = k x = 1825000 * 0.04040 = 73730 N

To learn more about Kinematics of Spring Motion:

https://brainly.com/question/27165003

#SPJ1

Answer: I think it's The Baltic Sea and The Black Sea

The EMF induced in a single wire loop with an area of 0.0940 m² is in a uniform magnetic field which has an initial value of 3.80 T, is perpendicular to the plane of the loop, and decreases at a constant rate of 0.190 T = 0.34 V. And the current induced in the loop = 0.57 A.

Induced electromotive force or induced emf is the potential difference at the ends of the coil which will produce an induced electric current.

An induced electric current appears as long as there is a change in magnetic flux.

The equation is:

ε = d∅/dt

We have,

The area of the loop = 0.0940m²

The change in magnetic field with time = (3.80 T - 0.190 T) = 3.61 T

So, the EMF induced:

ε = d∅/dt

=  {(0.0940m²) (3.61)} / 1

= 0.34 V

And the current induced in the loop =

I = ε/R

= 0.34 V / 0.600 Ω

= 0.57 A

The question is incomplete, it should be:

A single loop of wire with an area of 0.0900m2 is in a uniform magnetic field that has an initial value of 3.8 T, is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.190 T/s.

(a) What emf is induced in this loop?

(b) If the loop has a resistance of 0.600O, find the current induced in the loop.

Learn more about EMF induced here: https://brainly.com/question/17329842

#SPJ4

The diameter of the objective lens or mirror characteristics of an astronomical telescope is the most important for determining the angular resolution .

The aperture of a telescope, also known as the objective or light-gathering lens or mirror, is its most crucial feature. The telescope's specifications can be found on the box, at the front of the tube, or close to the focuser.

In order to acquire a clearer view of the planets, stars, and galaxies that we are researching, we launch telescopes into space in order to avoid the Earth's atmosphere. Our atmosphere functions as a shield, allowing some light to pass through but blocking others.

To know more about angular resolution visit:

https://brainly.com/question/13404856

#SPJ4

A string that is under 55.0 N of tension has linear density 4.20 g/m. The maximum velocity of a particle on the string is 114.4 m/s

The speed of a transverse wave on a string under tension is given by:

v = sqrt (T/μ)

Where:

v = speed or velocity of the wave

T = tension on the string

μ = density per unit length

In the given problem:

T = 55 N

μ = = 4.2 g/m = 4.2 x 10⁻³ kg/m

Plug these parameters into the formula:

v = sqrt (T/μ)

  = sqrt (55 / 4.2 x 10⁻³ ) = 114.4 m/s

The maximum velocity of a particle on the string is equal to the velocity of the transverse wave, that is 114.4 m/s

Learn more about transverse wave here:

https://brainly.com/question/28203949

#SPJ4

As he rides in the same direction of rotation of station, the normal force increases and as he rides in opposite direction of motion, normal force decreases.

The gravitational force has not disappeared in space station, but astronauts feel weightlessness. This is because of microgravity. It happens when an object is falling freely.

Both the astronauts and the ISS are orbiting around the Earth. This means, they are in a state of freefall towards the Earth.

On the ISS therefore, the acceleration due to gravity is not zero. In fact the gravitational field inside the ISS is almost as large as that they are exposed to on the Earth.

As there is presence of gravity, there is also presence of opposite normal force. This force increases when rotation along with earth in same direction and it decreases when rotating in opposite direction.

To know more about ISS here

brainly.com/question/15849606

#SPJ4

The maximum weight that has to be lifted is 3922 N. and the diameter of the pipe under the platform if the diameter is 37.

Platform is defined as a collection of technologies that serve as the foundation for the development of new applications, procedures, or technologies.  By facilitating transactions, a platform eventually makes this wealth generation possible.

A maximum weight of (3,471 + 451) g = 3922 N must be lifted. The other piston cannot be subjected to more than 100 N of force. The ratio of the two pistons' diameters needs to be sqrt (3922 / 106) = 37.

Thus, the maximum weight that has to be lifted is 3922 N. and the diameter of the pipe under the platform if the diameter is 37.

To learn more about platform, refer to the link below:

https://brainly.com/question/21330392

#SPJ1

Lorenz curve is the curve that plots graphically the distribution of income. Therefore, the correct statement is statement 3.

The Lorenz curve depicts the distribution of income (or wealth) within an economy. Max O. Lorenz created it in 1905 to symbolize the distribution of income. The Lorenz curve displays the total percentage of income earned by various demographic groups.

The graph shows cumulative income or wealth on the vertical axis and percentiles of the population according to income or wealth on the horizontal axis. Lorenz curves and the statistics derived from them are frequently utilized to assess inequality within a population.

An empirical measurement of the wealth or income distribution within a population, based on information from tax returns, which detail income for a significant section of the people, is the common starting point for a Lorenz curve.

Therefore, statement 3 is correct.

To know more about the Lorenz curve:

https://brainly.com/question/14233099

#SPJ4

The speakers produce the second destructive interference at the distance of 0.704 m.

Let us take the speed of sound v as 340 m/s.

The frequency f of sound is given as 725 Hz.

The wavelength is calculated to be,

λ = v / f = 340/ 725 = 0.469 m

For destructive interference, distance is given as,

d = (2k - 1) * λ/2

For second destructive interference, put K = 2 in the above formula,

d = (4 - 1) * 0.469/2 = 0.704 m

Thus, the speakers produce the second interference at the distance of 0.704 m.

To know more about interference:

https://brainly.com/question/14165767

#SPJ4

The change in internal energy of gas is Delta U = 1.337E+0 moles * (5/2)R * (900 K - Tc) Where Tc is the temperature of the gas at point c. the heat added to the gas in going directly from a to c is Q = 1.337E+0 moles * (5/2)R * (900 K - Tc).

To find the change in internal energy of an ideal gas during a process, you can use the equation: Delta U = n * Cv * Delta T Where Delta U is the change in internal energy, n is the number of moles of the gas, Cv is the molar specific heat capacity at constant volume, and Delta T is the change in temperature. For a diatomic gas, the molar specific heat capacity at constant volume is Cv = (5/2)R, where R is the ideal gas constant. Plugging in the given values, you get: Delta U = 1.337E+0 moles * (5/2)R * (900 K - Tc). To find the heat added to the gas in going directly from a to c, you can use the equation: Q = Delta U + Delta (PV) Where Q is the heat added to the gas, Delta U is the change in internal energy, and Delta (PV) is the change in the product of pressure and volume. For an ideal gas, the change in internal energy is equal to the heat added, so you can simply use the equation: Q = Delta U Plugging in the values, you get: Q = 1.337E+0 moles * (5/2)R * (900 K - Tc).

To know more about heat-

https://brainly.com/question/13860901

#SPJ4

The net force on the block is at its maximum magnitude and pointing in the positive x direction when the block is at the extreme right end of its oscillation, where the displacement of the block is equal to the amplitude a.

Oscillation is a repeating motion between two or more points. It can refer to the motion of a physical object, a sound wave, an electromagnetic wave, or any other type of wave. Oscillation is a fundamental concept in many branches of physics, such as mechanical, electrical, and acoustics. Examples of oscillation include a swinging pendulum, a vibrating guitar string, the sound of a siren, and the regular vibrations of an AC electrical current.

At this point, the spring is stretched to its maximum and is exerting a force in the positive x direction on the block. This is the only position at which the net force on the block is at its maximum magnitude and pointing in the positive x direction.

To know more about oscillation click-

https://brainly.com/question/17618978

#SPJ4

The combination of momentum conservation and mechanical energy conservation yields the letter C.

You need:

1.Conservation of energy to calculate the velocity of the firstball of clay by the time it descends:

mgh=1/2mu2

[calculate h by using h=L(1-cos45)]

2.Conservation of momentum to find out the final velocity of theballs of clay using:

m1u1+m2u2=(m1+m2)v  ---note:u2=0

3.Conservation of energy to calculate the max height the balls ofclay will go by using:

1/2(m1+m2)v2=mgh

Once you have h,

h=L(1-cosθ), solve for θ

In Newtonian physics, an object's mass and velocity are combined to form momentum, more precisely linear momentum or translational momentum. It has both a magnitude and a direction, making it a vector quantity. If an item has mass (m) and velocity (v), both of which are vector quantities, then it has momentum (p).

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ4