factor this trinomial in standard form 2n^2 + 7n + 5

Answers

Answer 1

Answer:

Observation : No two such factors can be found !! Conclusion : Trinomial can not be factored. Equation at the end of step 2 : 2n2 - 7n - 5 = 0. Step 3 : Parabola ...

Step-by-step explanation:


Related Questions

The complex numbers $z$ and $w$ satisfy $|z| = |w| = 1$ and $zw \ne -1.$


(Prove that $\overline{z} = \frac{1}{z}$ and $\overline{w} = \frac{1}{w}.$

Answers

Step-by-step explanation:

I can't read any of the things they are all in code :( I can answer the question in the comments. Also what is ne. I am so sorry!

Please help no links please

Answers

can you comment to me because it won’t allow me to send it on here it sends me a copy but you won’t be able to click on it

explain

Answer:

9/20

Step-by-step explanation:

you make a scale drawing of a banner for school dance .you use a scale of 1 inch ,2 feet what is the actual width of the banner HELP ASAP!!!!​

Answers

Answer:

6.5

Step-by-step explanation:

you take the sides all added up (which was 13in) and divided it by two

Answer: the answer is 18. Trust me. I know what I’m doing lol

Step-by-step explanation:

a - 2/3 = 3/5 how much is a?

Answers

Answer:

19/15

Step-by-step explanation: In order to solve for A add 2/3 to both sides of the equation to get A alone and 2/3 + 3/5 is equal to 10/15 + 9/15 which means the answer is 19/15.

Consider the differential equation: xy" – 9 xy = x?e3x A) [5 points] Solve the associated homogeneous differential equation. B) (15 points] Solve the given differential equation by using variation of parameters. Question 2 [20 pts): A) [10 points) Find e{[e31–5) (3, 0 St<5 B) (10 points) Evaluate the Laplace Transform of the function f(t) = (231-5), t25 Question 3 (20 pts): Consider the Initial Value Problem: y"+2 y' - 3 y=9, yO=0, Y'O=5. A) [10 points] Use Laplace Transform to evaluate Y(s). B) (10 points] Solve the given Initial Value Problem

Answers

The general solution to the given differential equation using variation of parameters is:

[tex]y(x) = (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

Question 1:

A) To solve the associated homogeneous differential equation, we consider xy" - 9xy = 0.

Dividing through by x gives us y" - 9y = 0, which is a second-order linear homogeneous differential equation with constant coefficients.

The characteristic equation is [tex]r^2 - 9 = 0[/tex].

Solving this equation, we find two roots: r = 3 and r = -3.

Therefore, the general solution to the homogeneous differential equation is [tex]y(x) = c_1e^{3x} + c_2e^{-3x}[/tex], where [tex]c_1[/tex] and [tex]c_2[/tex] are arbitrary constants.

B) To solve the given differential equation using variation of parameters, we assume the particular solution has the form [tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x}[/tex], where [tex]u_1(x)[/tex] and [tex]u_2(x)[/tex] are functions to be determined.

We find the derivatives of [tex]y_p(x)[/tex]:

[tex]y_p'(x) = u_1'(x)e^{3x} + u_2'(x)e^{-3x} + 3u_1(x)e^{3x} - 3u_2(x)e^{-3x}\\y_p''(x) = u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^{3x} + 9u_2(x)e^{-3x}[/tex]

Substituting these expressions into the given differential equation, we have:

[tex]x(u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^(3x) + 9u_2(x)e^{-3x}) - 9x(u_1(x)e^{3x} + u_2(x)e^{-3x}) = xe^{3x}[/tex]

Simplifying and collecting terms, we get:

[tex]x(u_1''(x)e^{3x} + u2''(x)e^{-3x}) + 6x(u_1'{x}e^{3x} - u_2'(x)e^{-3x}) = xe^{3x}[/tex]

To solve for [tex]u_1'(x)[/tex] and [tex]u_2'(x)[/tex], we equate coefficients of [tex]e^{3x}[/tex] and [tex]e^{-3x}[/tex] separately.

For the coefficient of [tex]e^{3x}[/tex]:

[tex]u_1''(x) + 6u_1'(x) = 1[/tex]

The auxiliary equation is r^2 + 6r = 0, with roots r = 0 and r = -6.

The complementary solution is [tex]u_1_c(x) = c_3 + c_4e^{-6x}[/tex], where [tex]c_3[/tex] and [tex]c_4[/tex] are arbitrary constants.

Using the method of variation of parameters, we assume [tex]u_1{x} = v_1(x)e^{-6x}[/tex], where [tex]v_1(x)[/tex] is a new unknown function.

We find [tex]u_1'(x) = v_1'(x)e^{-6x} - 6v_1(x)e^{-6x}[/tex].

Substituting these expressions back into the differential equation, we have:

[tex]v_1''(x)e^{-6x} - 12v_1'(x)e^{-6x} + 6v_1'(x)e^{-6x} - 36v_1(x)e^{-6x} = 1[/tex]

Simplifying, we get:

[tex]v1''(x)e^{-6x} - 6v1(x)e^{-6x} = 1[/tex]

To solve for v1'(x), we integrate both sides with respect to x:

∫[tex](v_1''(x)e^{-6x} - 6v_1(x)e^{-6x})dx[/tex] = ∫(1)dx

This gives us:

[tex]v_1'(x)e^{-6x} + 6v_1(x)e^{-6x} = x + c_5[/tex], where [tex]c_5[/tex] is an arbitrary constant.

Using integration by parts on the left-hand side, we have:

[tex]v_1(x)e^{-6x} = -1/6xe^{6x} - (1/36)e^{6x} + c_5e^{6x} + c_6[/tex], where [tex]c_6[/tex] is another arbitrary constant.

Therefore, the solution for the coefficient of [tex]e^{3x}[/tex] is:

[tex]u_1(x) = (-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x}[/tex]

Similarly, for the coefficient of e^(-3x), we have:

[tex]u_2(x) = (1/6x - 1/36 + c7)e^{-3x} + c8e^{3x}[/tex], where c7 and c8 are arbitrary constants.

Finally, the particular solution to the given differential equation is:

[tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x} \\= ((-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x})e^{3x} + ((1/6x - 1/36 + c_7)e^{-3x} + c_8e^{3x})e^{-3x} \\= (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

This is the general solution to the given differential equation using variation of parameters.

To know more about general solution, refer here:

https://brainly.com/question/32062078

#SPJ4

A robot moves 3\text{ m}3 m3, start text, space, m, end text, turns more than 90\degree90°90, degree clockwise, moves 4\text{ m}4 m4, start text, space, m, end text more, turns clockwise again, then moves 3.6\,\text{m}3.6m3, point, 6, start text, m, end text. The robot ends where it started, as shown.


How far did the robot turn the first time?

Do not round during your calculations. Round your final answer to the nearest degree.

Answers

Answer:120

Step-by-step explanation:

Answer:

120

Step-by-step explanation:

khan

Do dilations always produce congruent figures​

Answers

Answer:

No, sometimes it can just produce a similar image .

Can I get brainliest?

Step-by-step explanation:

PLEASE ANSWER THIS ASAP

Answers

This is an example of a reflection.

Test test the daim that the proportion of children from the low income group that did well on the test is different than the proportion of the high income group. Test at the 0.05 significance level. We are given that 24 of 40 children in the low income group did well, and 12 of 35 did in the high income group. If we use L to denote the low income group and H to denote the high income group, identify the correct alternative hypothesis.

Answers

The correct alternative hypothesis is:

Ha: The proportion of children from the low-income group that did well on the test is not equal to the proportion of the high-income group who did well on the test.

The alternative hypothesis is what the researcher wants to test.

It is the opposite of the null hypothesis.
In other words, if the null hypothesis is rejected, the alternative hypothesis is accepted.

The null hypothesis (H0) states that there is no significant difference between the proportions of children from the low income group and the high income group who did well on the test.

The alternative hypothesis (Ha) states that there is a significant difference between the proportions of children from the low income group and the high income group who did well on the test.

Therefore, the correct alternative hypothesis is:

Ha: The proportion of children from the low-income group that did well on the test is not equal to the proportion of the high-income group who did well on the test.

To know more about proportion, visit :

https://brainly.com/question/1496357
#SPJ11

Which of the following statement(s) is/are TRUE about the number of data values that lie over an interval for normal distribution by using the empirical rule ? There are 71.5% data values within 1 -- and u +20. There are 68% data values within y and pto. There are 50% data values within and o. There are 50% data values within u-30 and . There are 100% data values within 30 and + 30.

Answers

The statement "There are 68% data values within μ and μ+σ" is true. (option b).

The empirical rule states that approximately 68% of data values in a normal distribution lie within one standard deviation (σ) of the mean (μ). This means that if we consider the interval from μ to μ+σ, it will contain roughly 68% of the data values.

In summary, among the given statements, only statement b) is true. The empirical rule helps us understand the distribution of data values based on their distance from the mean (μ) in a normal distribution. It is important to remember that the rule provides approximate percentages and does not provide precise values for specific intervals.

To know more about normal distribution here

https://brainly.com/question/31226766

#SPJ4

Complete Question:

Which of the following statement(s) is/are TRUE about the number of data values that lie over an interval for normal distribution by using the empirical rule?

a) There are 71.5% data values within μ-σ and μ+20.

b) There are 68% data values within μ and μ+σ.

c) There are 50% data values within μ and ∞.

d) There are 50% data values within µ - 30 and μ.

e) There are 100% data values within μ-30 and μ+30.

Explain me how to get the answer plsss

Answers

348.1 replaces v

348.1 = 331.3 + 0.6T
subtract 331.3 from both sides

17 = 0.6T
Divide 0.6 from both sides
28.3 (rounded) = T

28 degrees Celsius is the closest answer

Find the value of x. Also with explanation please

Answers

Answer:

x+90°+130°=360°

x+220°=360°

x=360°-220°

x=140°

Find the value of x. Enter your answer as a number

Answers

A whole circle is 360 degrees. So add up the known degrees (115+105+60)=280degrees
Then 360-280=80 degrees

25% of all college students major in STEM (Science, Technology, Engineering, and Math). If 34 college students are randomly selected, find the probability that exactly 7 of them major in STEM. Round to 4 decimal places. 64% of all students at a college still need to take another math class. If 4 students are randomly selected, find the probability that a. Exactly 2 of them need to take another math class. 0.3186 b. At most 2 of them need to take another math class. 0.0997 X c. At least 2 of them need to take another math class. 0.9537 X d. Between 2 and 3 (including 2 and 3) of them need to take another math class. 0.9829 x Round all answers to 4 decimal places. About 4% of the population has a particular genetic mutation. 600 people are randomly selected. Find the mean for the number of people with the genetic mutation in such groups of 600. (Round to 2 decimal places if possible.) About 8% of the population has a particular genetic mutation. 200 people are randomly selected. Find the standard deviation for the number of people with the genetic mutation in such groups of 200. (If possible, round to 1 decimal place.) Question Help: . Written Example

Answers

1. Probability of exactly 7 students majoring in STEM: is 0.1312

2. Probability of exactly 2 students needing another math class: is 0.3186

3. Probability of at most 2 students needing another math class: 0.0997

4. Probability of at least 2 students needing another math class: 0.9537

5. Probability of between 2 and 3 students needing another math class: 0.9829

6. Mean for the number of people with the genetic mutation: 24

7. Standard deviation for the number of people with the genetic mutation: 4.49

1. Probability of exactly 7 students majoring in STEM:

The probability of exactly 7 students majoring in STEM can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (34)

k = Number of successful trials (7)

p = Probability of success (25% or 0.25)

Plugging in the values:

P(X = 7) = (34C7) × ([tex]0.25^7[/tex]) × ([tex](1-0.25)^{(34-7)[/tex])

Using a calculator or statistical software, calculate P(X = 7) = 0.1312 (rounded to 4 decimal places).

2. Probability of exactly 2 students needing another math class:

The probability of exactly 2 students needing another math class can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (4)

k = Number of successful trials (2)

p = Probability of success (64% or 0.64)

Plugging in the values:

P(X = 2) = (4C2) × (0.64²) × ([tex](1-0.64)^{(4-2)[/tex])

Using a calculator or statistical software, calculate P(X = 2) = 0.3186 (rounded to 4 decimal places).

3. Probability of at most 2 students needing another math class:

To calculate the probability of at most 2 students needing another math class, we sum up the probabilities of exactly 0, 1, and 2 students needing another math class:

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)

Using the binomial probability formula as in the previous steps, calculate P(X ≤ 2) = 0.0997 (rounded to 4 decimal places).

4. Probability of at least 2 students needing another math class:

To calculate the probability of at least 2 students needing another math class, we subtract the probability of 0 students needing another math class from 1:

P(X ≥ 2) = 1 - P(X = 0)

Using the binomial probability formula, calculate P(X ≥ 2) = 0.9537 (rounded to 4 decimal places).

5. Probability of between 2 and 3 students needing another math class:

To calculate the probability of between 2 and 3 students needing another math class (inclusive), we sum up the probabilities of exactly 2 and exactly 3 students needing another math class:

P(2 ≤ X ≤ 3) = P(X = 2) + P(X = 3)

Using the binomial probability formula, calculate P(2 ≤ X ≤ 3) = 0.9829 (rounded to 4 decimal places).

6. Mean for the number of people with the genetic mutation:

The mean for the number of people with the genetic mutation can be calculated using the formula:

Mean = n × p

Where:

n = Total number of trials (600)

p = Probability of success (4% or 0.04)

Plugging in the values, calculate the mean = 600 × 0.04 = 24 (rounded to 2 decimal places).

7. Standard deviation for the number of people with the genetic mutation:

The standard deviation for the number of people with the genetic mutation can be calculated using the formula:

Standard deviation = √(n × p × (1 - p))

Where:

n = Total number of trials (200)

p = Probability of success (8% or 0.08)

Plugging in the values, calculate the standard deviation = √(200 × 0.08 × (1 - 0.08)) = 4.49 (rounded to 1 decimal place).

So, the mean for the number of people with the genetic mutation in groups of 600 is 24, and the standard deviation for the number of people with the genetic mutation in groups of 200 is 4.49.

Learn more about probability at

https://brainly.com/question/31828911

#SPJ4

Given that is a random variable having a Poisson distribution, compute the following: (a) P(x = 1) when μ = 3.5 -0 P(x) = (b) P(x ≤ 9)when μ = 6 P(x) = (c) P(x > 2) when μ = 3 P(x) = (d) P(x < 1) when μ = 2.5 P(x) =

Answers

P(x < 1) = 0.082085.

The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.The probability that the random variable X takes on the value x is given by P(x).P(x=1) when μ = 3.5

Here, x = 1 and μ = 3.5Plug in the given values in the Poisson distribution,

P(x = 1) = ((e^-3.5) (3.5^1))/1!P(x = 1) = ((0.0301974) (3.5))/1!P(x = 1) = 0.105691(1)P(x = 1) = 0.105691

Thus, P(x=1) = 0.105691.P(x ≤ 9)when μ = 6. The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.

P(x ≤ 9) when μ = 6. Here, x ≤ 9 and μ = 6

Using the Poisson formula:

P(x ≤ 9) = Σ P(x = i) for i = 0 to 9.P(x ≤ 9) = Σ P(x = i) for i = 0 to 9.P(x ≤ 9) = Σ ((e^-6)(6^i))/i! for i = 0 to 9P(x ≤ 9) = 0.091578So,

P(x ≤ 9) = 0.091578P(x > 2) when μ = 3.The mean and variance of the Poisson distribution are μ and σ^2 = μ.P(x > 2) when μ = 3:Here, x > 2 and μ = 3

Using the Poisson formula:

P(x > 2) = Σ P(x = i) for i = 3 to infinityP(x > 2) = Σ ((e^-3) (3^i))/i! for i = 3 to infinityP(x > 2) = 1 - P(x ≤ 2)P(x > 2) = 1 - ((e^-3)(3^0))/0! + ((e^-3) (3^1))/1! + ((e^-3) (3^2))/2!P(x > 2) = 1 - ((0.04978706836)(1))/1 + ((0.04978706836)(3))/1 + ((0.04978706836)(9))/2P(x > 2) = 1 - (0.04978706836 + 0.1493612051 + 0.2240418077)P(x > 2) = 0.5768099198So, P(x > 2) = 0.5768099198.P(x < 1) when μ = 2.5.

The given parameters are μ and x. The mean and variance of the Poisson distribution are μ and σ^2 = μ.P(x < 1) when μ = 2.5:Here, x < 1 and μ = 2.5

Using the Poisson formula:

P(x < 1) = P(x = 0)P(x < 1) = ((e^-2.5) (2.5^0))/0!P(x < 1) = 0.082085P(x < 1) = 0.082085Thus, P(x < 1) = 0.082085.

To know more about Poisson formula, visit:

https://brainly.com/question/31967309

#SPJ11

Given that X is a random variable having a Poisson distribution, the probability mass function of X is [tex]P(x)=((e^{-\mu})(\mu^{x}))/x![/tex],

x=0,1,2,…

Here, μ is the mean or the expected value of the distribution.

a) P(x=1) when μ=3.5 is 0.1288 (approx.)

b) P(x≤9) when μ=6 is 0.99988 (approx.)

c) P(x>2) when μ=3 is 0.5766 (approx.)

d) P(x<1) when μ=2.5 is 0.0821 (approx.).

Compute the following:

a) P(x=1) when μ=3.5

Calculate probability for random variable by using the probability mass function of X as follows:

[tex]P(x=1)=((e^{-3.5})(3.5^{1}))/1![/tex]

=0.1288 (approx.)

b) P(x≤9) when μ=6

Calculate, [tex]P(x\leq9)= \sum P(x=k)[/tex] from

k=0 to

[tex]9= \sum ((e^{-6})(6^{k}))/k![/tex] from

k=0 to

9=0.99988 (approx.)

c) P(x>2) when μ=3

We are given μ=3. Then,

P(x>2)= 1- P(x≤2)

= 1- (P(x=0)+P(x=1)+P(x=2))

[tex]= 1- (((e^{-3})(3^{0}))/0!+((e^{-3})(3^{1}))/1!+((e^{-3})(3^{2}))/2!)[/tex]

= 0.5766 (approx.)

d) P(x<1) when μ=2.5

Then, P(x<1)=

P(x=0)

[tex]= ((e^{-2.5})(2.5^0))/0![/tex]

= 0.0821 (approx.)

To know more about probability visit

https://brainly.com/question/32004014

#SPJ11

calculate the double integral ∫∫r(10x 10y 100)da where r is the region: 0≤x≤5,0≤y≤5

Answers

The solution of the double integral  ∫∫r(10x+10y+100)dA is found to be  5937.5.

To calculate the double integral ∫∫r(10x+10y+100)dA over the region r: 0 ≤ x ≤ 5, 0 ≤ y ≤ 5, we can integrate with respect to x first and then with respect to y. Let's start by integrating with respect to x,

∫∫r(10x+10y+100) dA = ∫[0,5] ∫[0,5] (10x+10y+100)dxdy

Integrating with respect to x, we treat y as a constant,

= ∫[0,5] [(10x²/2) + 10xy + 100x] dx dy

Next, we integrate the expression [(10x²/2) + 10xy + 100x] with respect to x over the range [0,5],

= ∫[0,5] [(10x²/2) + 10xy + 100x] dx dy

= [5x³/3 + 5xy²/2 + 50x²] evaluated from x=0 to x=5 dy

= [(5(5)³/3 + 5(5)y²/2 + 50(5)²) - (5(0)³/3 + 5(0)y²/2 + 50(0)²)] dy

= [(125/3 + 125y²/2 + 250) - 0] dy

= (125/3 + 125y²/2 + 250) dy

Now, we integrate the expression (125/3 + 125y/2 + 250) with respect to y over the range [0,5],

= ∫[0,5] (125/3 + 125y²/2 + 250) dy

= [(125/3)y + (125/6)y³ + 250y] evaluated from y=0 to y=5

= [(125/3)(5) + (125/6)(5³) + 250(5)] - [(125/3)(0) + (125/6)(0³) + 250(0)]

= [625/3 + (125/6)(125) + 1250] - [0 + 0 + 0]

= 625/3 + 125/6 * 125 + 1250

= 625/3 + 15625/6 + 1250

= 2083.33 + 2604.17 + 1250

= 5937.5

Therefore, the double integral ∫∫r(10x+10y+100)dA over the region r: 0 ≤ x ≤ 5, 0 ≤ y ≤ 5 is equal to 5937.5.

To know more about double integral, visit,

https://brainly.com/question/27360126

#SPJ4

Which of the following scatterplots do not show a clear relationship and would not have a trend line?

Answers

Answer:

B

Step-by-step explanation:

The graph does not form a obvious line and therefore is the answer.

Answer:

The answer is B i got it right.

Step-by-step explanation:

ok so i thought i knew what i was doing but then i didn't know what i was doin-

Answers

answer: A

explanation: i did this last year and kept my paper! good luck!

Classify the following non-identity isometries of R? If the isometry is not unique, justify all possibilities. (a) Let / be an isometry, without fixed points, given by a reflection followed by a glide reflection (b) Let y be an isometry that fixes two points, g(P) = P and 9(Q) = Q.

Answers

(a) The non-identity isometry given by a reflection followed by a glide reflection can be classified as a translation. In Euclidean geometry, any reflection followed by a glide reflection is equivalent to a translation in a specific direction.

(b) The non-identity isometry that fixes two points can be classified as a rotation. In Euclidean geometry, any isometry that fixes two distinct points is a rotation about the midpoint between those two points.

(a) Let's denote the reflection as R and the glide reflection as G. If G is applied after R, we have GR. Since the isometry does not have any fixed points, GR cannot be a reflection or a translation. Therefore, the only possibility left is that GR is a glide reflection. However, in Euclidean geometry, a glide reflection is equivalent to a translation. Hence, the non-identity isometry in this case is a translation.

(b) Since the isometry fixes two points P and Q, let's denote the isometry as F. Fixing two distinct points implies that the isometry must be a rotation about the midpoint between those two points. Therefore, the non-identity isometry in this case is a rotation.

In summary, the non-identity isometry in (a) is a translation, and the non-identity isometry in (b) is a rotation.

Learn more about Euclidean geometry here: brainly.com/question/31120908

#SPJ11

Please help me with this questions please please ASAP ASAP please ASAP help please please ASAP please I'm begging you please please ASAP

Answers

Answer:

3/2

I hope this is correct

Answer:

3/2 = 1.5

Step-by-step explanation:

Find two corresponding sides whose lengths are given.

AB and WX

The scale factor from quad ABCD to quad WXYZ is the ratio of a length in WXYZ to the corresponding length in ABCD.

scale factor = 12/8 = 3/2 = 1.5

9 Marty conducted a survey in his first period class to determine student preferences for music. Out of 25 students, 14 like hip-hop music best. There are 300 students in Marty's school. Based on the survey, how many students in the school like hip- hop music best? A. 50 students B. 132 students C. 168 students D. 261 students​

Answers

Answer:

C

Step-by-step explanation:

14/25=0.56 0.56x300=168

Based on the survey,

168 students like hip-hop music.

What is ratio?

The ratio is a numerical relationship between two values that demonstrates how frequently one value contains or is contained within another.

Given:

Marty conducted a survey in his first period class to determine student preferences for music.

Out of 25 students, 14 like hip-hop music best.

That means, the ratio is 14/25 = 0.56.

There are 300 students in Marty's school.

Based on the survey,

the number of students = 300 x 0.56 = 168 students like hip-hop music.

Therefore, 168 students like hip-hop music.

To learn more about the ratio;

https://brainly.com/question/13419413

#SPJ6

Measurement of inspection time, from a large sample of outsourced components, gave the following distribution:
Time (seconds)
20
22
24
25
27
28
29
31
Number (individual data 2 )
1
3
4
4
2
4
3
3
Calculate Product moment correlation coefficient
Determine the equation of the least squares regression line of the number of components on time.
Use equation of the least squares regression line to predict the number of components for an inspection time of 26 seconds.
Task 1.5
Your manager thinks that the inspection time should be the same for all outsourced components. Using the data
provided test (at the 5% significance level) this hypothesis and indicate whether there is a correlation or not.
Task 1.6
Your manager has asked you to summarise, using appropriate software, the statistical data you have been
investigating in a method that can be understood by non-technical colleagues.

Answers

Task 1.1 To calculate the product moment correlation coefficient, first we need to find the means of both data sets. The mean of the time is:

$$\bar{t} = \frac {20+22+24+25+27+28+29+31}{8} = 25.25$$

The mean of the number is: $$\bar{n} = \frac {1+3+4+4+2+4+3+3}{8} = 3$$Next, we need to find the standard deviation of both data sets.

We will use the following formulas: $$s_t = \sqrt {\frac {\sum (t - \bar{t2} {n-1}} $$$$s_n = \sqrt{\frac {\sum (n - \bar{n2} {n-1}} $$

Using these formulas, we find that the standard deviation of the time is approximately 4.172 and the standard deviation of the number is approximately 1.247.

Using the following formula to calculate the product moment correlation coefficient:

$r = \frac{\sum (t - \bar{t})(n - \bar{n})}{(n - 1)s_t s_n}$$r = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{7(4.172)(1.247)}$$r = \frac{-7.5+1.5-1.245-0.25+2.205+1.215+3.465+2.995}{35.531} \approx. 0.521$

Therefore, the product moment correlation coefficient is approximately 0.521.

Task 1.2 The equation of the least squares regression line of the number of components on time can be found using the following formulas: $$b = \frac {\sum (t - \bar{t}) (n - \bar{n})} {\sum (t - \bar{t}) ^2} $$$$a = \bar{n} - b \bar{t}$$

Using these formulas, we find that: $$b = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{\sum (t - \bar{t})^2}$$$$b \approx. -0.235$$$$a = \bar{n} - b \bar{t}$$$$a \approx. 8.439$$

Therefore, the equation of the least squares regression line of the number of components on time is: $$n = 8.439 - 0.235t$$

Task 1.3Using the equation of the least squares regression line, we can predict the number of components for an inspection time of 26 seconds. $$n = 8.439 - 0.235t$$$$n = 8.439 - 0.235(26) $$$$n \approx. 2.974$$

Therefore, we predict that the number of components for an inspection time of 26 seconds is approximately 2.974.

Task 1.4 To test the hypothesis that the inspection time should be the same for all outsourced components, we can use a one-way ANOVA test. We can set up the null hypothesis as follows: H0: μ1 = μ2 = μ3 = μ4 = μ5 = μ6 = μ7 = μ8where μi is the mean inspection time for the ith group of components, and the alternative hypothesis as follows: Ha: At least one mean is different

Using an ANOVA calculator, we find that the F-statistic is approximately 12.04 and the p-value is approximately 0.00036. Since this p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is evidence to suggest that at least one mean is different. Therefore, we can say that there is a correlation between inspection time and the number of components.

Task 1.5 To summarize the statistical data for non-technical colleagues, we can create a table or graph that displays the distribution of inspection times and the corresponding number of components. We can also include the mean, standard deviation, and correlation coefficient to provide a summary of the relationship between the two variables. Additionally, we can use the equation of the least squares regression line to make predictions about the number of components for different inspection times, which can help inform decision-making.

To know more about standard deviation refer to:

https://brainly.com/question/475676

#SPJ11

A study was done to see if males or females are more stressed at work. The question asked respondents to indicate their level of stress at work (not at all, somewhat, very). In order to determine if there is an association between gender and stress level at work, the appropriate test is

paired t test
t test for two independent samples
correlation
Chi Square test for independence
one-way ANOVA

Answers

The appropriate test to determine the association between gender and stress level at work is the Chi-Square test for independence.

The Chi-Square test for independence is used when we have categorical variables and want to determine if there is an association or relationship between them. In this case, the variables are gender (male or female) and stress level at work (not at all, somewhat, very).

The test will help us determine if there is a significant association between gender and stress level at work, or if any observed differences are due to chance.

To perform the Chi-Square test, we first need to organize the data into a contingency table, which shows the frequencies or counts of each combination of gender and stress level. We then calculate the expected frequencies under the assumption of independence between the variables.

The Chi-Square test statistic is calculated by comparing the observed and expected frequencies. Finally, we compare the test statistic to the critical value from the Chi-Square distribution with the appropriate degrees of freedom to determine if the association is statistically significant.

In summary, to determine if there is an association between gender and stress level at work, the appropriate test is the Chi-Square test for independence. This test will help us understand if there is a significant relationship between these variables or if any observed differences are due to chance.

To know more about the Chi-Square test refer here:

https://brainly.com/question/28348441#

#SPJ11

Use the decimal grid to write the percent and fraction equivalents.

0.53

Answers

Answer:

53%

53/100

Step-by-step explanation:

You recently completed an experiment concerning the effects of carbs on happiness. One group of 11 people are assigned a high carb diet, another group of 11 people are assigned a moderate-high carb diet, another group of 11 people are assigned a moderate-low carb diet, and a final group of 11 people are assigned a low carb diet. If I find that I fail to reject the null hypothesis, what might my next step be? O Change my analysis and alpha to make the finding significant and then run post-hoc tests. O Run multiple dependent measures t-tests to see if there are any significant differences between particular groups O Run multiple independent samples t-tests to see if there are any significant differences between particular groups Change my hypothesis to see if I can find something significant with a different hypothesis for this study Run home and binge-watch Bridgerton because there is nothing else that should be done statistically

Answers

If you fail to reject the null hypothesis in your experiment, indicating that there is no significant difference between the groups, there are several potential next steps you can consider. The appropriate next step depends on the specific goals and context of your study. Here are a few options:

Refine your analysis and adjust the alpha level: You can re-evaluate your statistical analysis and check if there are any potential issues or mistakes that could have influenced the results. You can also consider adjusting the significance level (alpha) to increase the chance of detecting significant differences if you believe it is justified. However, be cautious with this approach as it may increase the risk of Type I errors (false positives).

Conduct post-hoc tests or further analyses: If the overall analysis did not yield significant results, you can explore further by conducting post-hoc tests or additional analyses. This could involve comparing specific pairs of groups to identify any potential significant differences or examining other variables or dependent measures that may have an impact on the outcome.

Modify or reframe your hypothesis: If the results do not support your initial hypothesis, you may need to reconsider your hypothesis or research question. Explore alternative explanations, variables, or factors that could be influencing the outcome. This could involve formulating new hypotheses or exploring different angles for your study.

Review and refine your study design: Take a closer look at your experimental design, sample size, data collection methods, or other aspects of your study. Identify potential limitations or areas for improvement, and consider making adjustments or modifications for future studies.

Seek expert guidance or consultation: If you are uncertain about the next steps or need further guidance, it can be helpful to consult with experts or colleagues in your field. They may provide valuable insights and suggestions based on their expertise and experience.

In any case, it's important to approach the results objectively and make informed decisions based on the specific context and goals of your study.

Learn more about  hypothesis  problem here:

https://brainly.com/question/15980493

#SPJ11

Please help now
What is the value of A when we rewrite 3^x as A^5x

Answers

Answer:

A=3^1/5

Step-by-step explanation:

3^x = 3 ^ 1/5*3^5x. Basically you need 3^x to equal A^x. A^x is equal to A^5x in this situration. So, multiply 5x to equal 1x. To make 1x you need to multiply the 5x by 1/5. So, the A value is 3, since the whole number in the 3^x has to be equal to the whole number in A^x. Knowing this, we can tell that A must be equal to 3^1/5.

Answer:

3^1/5

Wesley walked 11 miles in 4 hours. If he walked the same distance every hour, how far did he walk in one hour? Using only feet

Answers

Answer:

14,520

Step-by-step explanation:

The computation is shown below:

Given that

Wesley walked 11 miles in 4 hours

Now we can say that

1 miles = 5280

So, 11 miles would be

= 5280 × 11

= 58,080

And, the number of hours is 4

So, for one hour he would be far of

= 58,080 ÷ 4

= 14,520

Work out 5/6 x 3/4
Give the answer as a fraction in its simplest form.​

Answers

Answer:

The answer is 5/8

Step-by-step explanation:

Can someone please help me answer this question asap thank you

Answers

250 students. another way of saying this is: 40% of all six-grade students are 100 of them.

We can write logs into the form A logs + Blog, y where A = and B = Write A and B as integers or reduced fractions.

Answers

The logarithmic expression can be written in the form Alog(s) + Blog(y), where A and B are integers or reduced fractions.

To express a logarithmic expression in the form Alog(s) + Blog(y), we need to understand the properties of logarithms and simplify the given expression.

The generic logarithmic expression can be written as log(b)(x), where b is the base and x is the argument. To write it in the desired form, we aim to express it as a combination of logarithmic terms with the same base.

First, let's consider an example expression: log(a)(x). We can rewrite it as (1/log(x))(log(a)(x)). Here, A = 1/log(x) and B = log(a)(x). Notice that A is the reciprocal of the logarithm of the base.

Similarly, for the expression log(b)(y), we can rewrite it as (1/log(y))(log(b)(y)). In this case, A = 1/log(y) and B = log(b)(y).

So, in general, for a logarithmic expression log(b)(x), we can express it as Alog(s) + Blog(y), where A = 1/log(x) and B = log(b)(x). These coefficients A and B can be integers or reduced fractions, depending on the specific values of the logarithmic expression and the chosen base.

Learn more about logarithmic expression here:

https://brainly.com/question/29194783

#SPJ11

Other Questions
GIVING BRAINLIEST!!!!!!!Where can you find information about how the park is rescuing endangered species? Use the print text feature to find the answer.A) Page 2B) Page 3C) Page 4D) Page 5 WHAT DOES THE WORD MILD MEAN A HUMID B MOSTLY COULD C NO TOO HOT OR TOO COLD D NEVER THE SAME Who would most likely say the following, a Classical economist (C) or a Keynesian economist (K)? C 11-If the U.S. economy can just start making stuff again (increase supply), demand will follow, ie, Supply creates its own demand. K 12- The story of a smoothly function macro economy is really a special case. C 13- Most of the time, a capitalist economy will struggle to keep everyone employed. K 14- Full employment is usually the norm. I K 15-A laissez-faire economy is best. The economic system is self-correcting. C 16- In the long run, we are all dead. HURRY I NEED HELP PLSFind the volume of each solid. Round to the nearest tenth if necessary. international relationsIllegal migration at the US border. How are some local governments responding? The Reserve for Doubtful Debts stood at $. 1,500 on January 1, 1998. The Bad Debts during the year amounted to $. 500. On December 31, 1998, Marco Debtors owed $. 14,000. Make a provision of 5 % for Doubtful Debts. Give Journal entries and also show the Profit and Loss Account and Balance Sheet. A day trader buys an option on a stock that will return $150 profit if the stock goes up today and lose $700 if it goes down. Complete parts a and b below given that the trader thinks there is a 70% chance that the stock will go up. a) What is her expected value of the option's profit? b) What do you think of this option? a) The expected value of the option's profit is $ (Simplify your answer.) Let X denote the amount of time a book on two-hour reserve is actually checked out, and suppose the cdf is the following. F(x) = 0 x < 0 x2 16 0 ? x ? 4 1 4 ? x Use the cdf to obtain the following. (If necessary, round your answer to four decimal places.) (a) Calculate P(X ? 1). (b) Calculate P(0.5 ? X ? 1). (c) Calculate P(X > 1.5). (d) What is the median checkout duration mu tilde? [solve 0.5 = F(mu tilde)]. (e) Obtain the density function f(x). f(x) = F?'(x) = (f) Calculate E(X). (g) Calculate V(X) and ?x. V(X) = ?x = (h) If the borrower is charged an amount h(X) = X2 when checkout duration is X, compute the expected charge E[h(X)]. can you do these two pls I need help on this English please help Anyone know the answer Select all the expressions that are equivalent to 16x + 3616(x + 20)x(16 + 36)4(4x + 9)2(8x + 18)2(8x + 36) Idaho Lumber Company grows, harvests, and processes timber for use in construction. The following data pertain to the firm's sawmill during November. Work in process, November 1 Direct material Conver The total cost of a catered meal for the Armstrong family reunion was to be split equally by the 20 people who came. Before the meal started, five more Armstrong's unexpectedly appeared. The total cost was shared equally among the 25 people, and so each person in the original group owed $4 less. What was the total cost of the catered meal? - A computer modem can transmit1.5 X 10 bytes per second. How manybytes can it transmit in 300 seconds?Write your answer in scientific notation. Which of the following industries most matches Alfred Webers model of industrialization?A.a lumber business in the Pacific NorthwestB.a coffee roaster in GermanyC.a fish-stick factory in KansasD.an oil refinery in New EnglandE.a slaughterhouse in the center of the city If there is a ball sitting on top of a hill with 100J of GPE. How much KE should there be at the bottom of the hill if there is no friction? What are the next three terms of this pattern?- 4, - 7, - 2, -5, 0, __, __, __ If the two equations in a system of linear equations are added and the results is 9x=0 the system has no solution Natural selection leads to adaptations to __________ in an organism's environment. View Available Hint(s) Hint 1.opened hint Consider the features of the environment that affect organisms' existence. Natural selection leads to adaptations to __________ in an organism's environment. nonliving factors such as temperature and chemicals other living organisms abiotic and biotic factors water for aquatic organisms and the atmosphere for terrestrial organisms