Answer:
Explanation:
Polar form:
ρ = A = 50
φ = - 45°; φ = - π / 4
r = ρ·cos φ
r = 50·cos (- π / 4)
Which side of a cuboid should be placed on the ground to exert maximum pressure?
a) The smallest side
b) The largest side
c) The longest side
d) Each side will exert the same pressure on the ground
If a 62 kg panther sits in a tree 1.3 meters above the ground, how much gravitational potential energy does it have?
If the air resistance cause the panther to lose 200 J of energy as it falls, what is the KE of the panther just before it hits the ground?
What was the velocity of the panther just before it hit the ground?
Gravitational Potential Energy , Kinetic Energy and velocity of panther just before hitting the ground will be 790.41599 J , 990.41599 J , 5.6523m/s respectively.
Mass is 62 kg with a height 1.3m .
Gravitational Potential Energy means product of mass , gravitational acceleration and height . Mathematically, GPE= mgh
GPE= 62 x 1.3 x 9.8
= 790.41599 J
Energy lost = Final energy- GPE
Final Energy Δ = 790.41599 J + 200 J
=990.41599 J
To find Velocity of panther just before hitting the ground V:-
Δ⇒mV²/2
990.41599 J= 62 V²/2
V²= {990.41599 x 2}/62
= 31.9489029
V=5.6523m/s
To know more about Gravitational Potential Energy:-
https://brainly.com/question/15978356
On a sunny day with clear roads, Freddie is going 5 m/s over the speed limit with a deceleration of 2g and he runs a red light. What is his speed as he goes through the light?
Answer: The most widely accepted method of determining the posted speed limit is to set the speed limit at what is called the “85th percentile speed”, which is the speed at or below which 85 percent of the traffic is moving.
Explanation:
What kind of organisms do binary fission?
Answer:
Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.
Explanation:
Answer:
Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.
Explanation:
a mass of 2kg is supported by two cords which makes angle 30 degree and 50 degree with the vertical. calculate the tension in the two cords
So, this is the diagram of the described situation, the strings are attached to a rigid support at their one end and the other end is connected to the particle.
Let, the string making an angle of 45 with the horizontal has a tension of T 1 and
the one making an angle of 30 has a tension of T2.
Now,
what we have done is that we have taken the vertical and
horizontal components of the tension in the two strings.
Now,considering the system to be in equilibrium,
see the diagram,the vertical component of the strings i.e
(T 1 sin 45 & T 2 sin 30) together will act to balance the weight of
the particle(mg)
So,we can say, T 1 sin 45 + T 2 sin 30 = mg. ...(1)
From horizontal equilibrium,we can say, T 1 cos 45 must balance T 2 cos 30 ,
as no other force is present in horizontal direction.
So,T 1 cos 45 = T 2 cos 30. ...(2)
Given,
mg = 10 ⋅ 10 = 100N
So, solving equation 1 & 2 we get,
T 1 = 89.65N and, T 2 = 73.20N
Which characteristic of Earth’s orbit are in agreement with Kepler’s second law
The features of Earth's orbit that concur with and conform to the pattern of Kepler's second law include the fact that Earth feels the largest gravitational pull when it is closest to the Sun.
In which of the following is Kepler's second law stated?According to Kepler's second rule, a planet moves in its ellipse so that a line drawn between it and the Sun and focused on it covers the same amount of space in the same amount of time.
What features distinguish the earth's orbit?The eccentricity of the Earth's orbit around the Sun, which is an ellipse, determines how far from a circle the orbit is (e). The perihelion, or point on the orbit that is closest to the Sun, and the apogee, or point most aphelion of the Sun.
To know more about Kepler's second law visit:-https://brainly.com/question/4216415
#SPJ1
staff members at the mental health center do not respond to patients who use threats, but praise patients who are polite. Which of the following psychotherapeutic approaches is being used? A. Behavioral therapy B. Cognitive therapy C. Humanistic therapy D. Psychoanalytic therapy E. Assertiveness training
In this case Behavioral therapy is being used.
What is Behavioral Therapy?
A broad phrase used to describe several forms of therapy used to address mental health conditions is behavioural therapy.
This type of treatment aims to recognize and assist in changing potentially harmful or unhealthy behaviors. It is predicated on the notion that all behaviors are taught and that they are modifiable. Treatment frequently focuses on current issues and solutions.
When staff members at the mental health center do not respond to patients who use threats, but praise patients who are polite, they try to teach politeness and other good behavior by using Behavioral therapy.
Learn more about behavioral therapy here:
https://brainly.com/question/24229313
#SPJ1
Please choose one of the following topics and write a short summary of the concept (50-100 words). Please ask a question about the chosen topic.
Topic Chosen: DARK MATTER / DARK ENERGY
The short summary of the concept of dark matter and dark energy is given here.
What is dark matter?An estimated 85% of the universe's mass is assumed to be made up of dark matter, a hypothetical type of stuff. Because it does not appear to interact with the electromagnetic field—that is, it does not absorb, reflect, or emit electromagnetic radiation—dark matter is referred to as being "dark," making it challenging to detect.
Numerous astrophysical observations support the existence of dark matter, including gravitational effects that cannot be described by the gravity theories currently in use without the presence of more matter than can be observed. Because of this, the majority of scientists believe that dark matter is prevalent in the universe and has significantly influenced both its structure and evolution.
What is dark energy?Dark energy is an undiscovered type of energy that has the largest effects on the cosmos according to physical cosmology and astronomy. Supernova observations provided the first direct proof for its existence by demonstrating that the cosmos is expanding faster than ever rather than at a fixed rate. It is necessary to understand the universe's origins and initial elements in order to comprehend its evolution.
Learn more about dark matter here:
https://brainly.com/question/29265929
#SPJ1
A lever and fulcrum are used to raise a heavy rock, which has a weight of 445 N. If the lever has a mechanical advantage of 9.50, what must the input force on the lever be in order to lift the rock?
The input force on the lever of mechanical advantage 9.5, in order for it to lift a rock of 445 N is 46.84 N.
What is force?Force can be defined as the product of mass and acceleration.
To calculate the input force on the lever, we use the formula below.
Formula:
E = W/M.A......... Equation 1Where:
E = Input forceW = Weight of the rockM.A = Mechanical advantage of the leverFrom the question,
Given:
W = 445 NM.A = 9.50Substitute these values into equation 1
E = 445/9.5E = 46.84 NHence, the input force on the lever is 46.84 N.
Learn more about force here: https://brainly.com/question/25239010
#SPJ1
rocket launch checklist
Answer:
Checklist 1: What to Bring...Your Rocket Launch Pad & Ignition System Rocket MotorsIgnitersRecovery WaddingAltitude Tracker Your Field Box Also, it would be a good idea for the group to bring A folding card table or picnic table for rocket prep Trash Bags: try to leave your launch field cleaner than you found it. First Aid Kit: be prepared. A fly or tarp set up as a lean-to to protect the rocket prep area from the wind and/or sun.
When elections are shared, molecules are produced and ? Is formed
A. A natural bond
B. An iconic compound
C. A covalent compound
D. A hydrogen bond
elections are shared, molecules are produced, the correct answer is option
C. A covalent compound
What is covalent compound?
Covalent compounds are composed of atoms that are linked via covalent bonds i.e. bonds formed by mutual sharing of electrons. This is in complete contrast to ionic compounds which are held together by ionic bonds, i.e. bonds formed by complete transfer of electrons from one atom to the other.
In the given examples we have:
Barium nitrate: Ba(NO3)2 - Ionic
Dinitrogen tetroxide: N2O4- Covalent
Strong intramolecular linkages characterise covalent substances. This is due to the atoms within covalent molecules being very securely bound together. Each molecule is certainly distinct, and the attraction between individual molecules in a covalent complex is typically modest.
To split the molecules, we simply require a minimal amount of energy. This is owing to the molecules' attraction forces as well as a lack of total electric charge. Covalent compounds are typically gaseous molecules at ambient temperature and pressure. They could be liquids with extremely low boiling points.
Learn more about covalent compound from given link
https://brainly.com/question/11651796
#SPJ1
A planet has a radius of 5 000 km. The acceleration of free fall of the planet is 6.05 m s-2. Determine the (i) Mass of the planet
(II) Escape velocity of the planet
Answer:
Explanation:
Given:
R = 5 000 km = 5*10⁶ m
g = 6.05 m/s²
G = 6.67·10⁻¹¹ m³/(kg*c²)
______________
M - ?
V - ?
(i)
g = G·M /R²
M = g·R² / G = 6.05·(5·10⁶)² / 6.67·10⁻¹¹ ≈ 2.27·10²⁴ kg·
(ii)
V = √ (g·R) = √ (6.05·5*10⁶) ≈ 5 500 m/s = 5.5 km/s
How long does it take a 100 g sample of As-81 to decay to 6.25 g? (half-life of As-81 is 33 seconds)
Answer:
Explanation:
m₀ = 100 g
m = 6.25 g
T = 33 s
_____________
t - ?
Radioactive decay constant:
λ = ln 2 / T = 0.693 / 33 ≈ 0.021 s⁻¹
Law of radioactive decay:
[tex]m=m_{0} e^{-\lambda t} \\[/tex]
[tex]e^{-\lambda t} = \frac{m}{m_0} \\[/tex]
[tex]ln (e^{-\lambda t}) = ln(\frac{m}{m_0} ) \\[/tex]
[tex]-\lambda t = ln (\frac{m}{m_0})[/tex]
[tex]t = -\frac{ln(\frac{m}{m_0}) }{\lambda}[/tex]
t = - ln (6.25/100) / 0.021 ≈ 132 s
I know this isn’t the right subject but i need help
Expository with an a anecdote and explain how specific life even impact the character of an individual
The current state of research offers some evidence that life events can cause changes in personality traits and that various life events may connect differently to various trait domains.
What is anecdote?
A brief narrative or account abou life events changet a person or event that is typically humorous, instructive, entertaining, or biographical in nature is known as an anecdote.
How do life events change your personality?
These ideas contend that because life events alter, interrupt, or reroute people's habits of thought, feeling, and action, they have long-lasting consequences on personality traits.
Hence is a changes in personality traits a correct answer.
To know more about life events change follow the link.
https://brainly.com/question/12119018
#SPJ1
The absolute Temprature of an ideal diatomic gas is quadrupied. What happens to the average sp eed of molecules?
If the absolute temperature of an ideal diatomic gas is quadrupled, then, the average speed of molecules is doubled.
[tex][V_avg=\sqrt(8k *4T)/\pi m],[V_avg=2\sqrt(8kT) \pi m],[V_avg=2v_avg][/tex]
Speed (often abbreviated as "s") is a scalar variable that describes how much an object's location changes over time or how much it changes per unit of time. The average speed of an item in a period of time is the distance traveled by the object divided by the duration of the period.
Time divided by distance are the speed-related metrics.. The meter per second (m/s) is the SI unit of speed, while the kilometer per hour (kph) is the most often used unit of speed in daily life.
To know more about speed visit : brainly.com/question/93357
#SPJ9
A rocket is launched straight up with a speed of 12 meters per second near the surface of Earth. [Neglect air friction.]
Answer:
Explanation:
H = V² / (2·g)
H = 12² / (2·9.8) ≈ 7,3 m
Answer:
By conservation of energy,
Kinetic energy of launched rocket = change in potential energy of rocket at maximum height.
→ Ig h is maximum height reached:
Give causes, Prevention and cure of diseases of Respiratory System.
any volunteer?
In respiratory system, Airflow from the lungs becomes obstructed due to chronic inflammatory lung disease called chronic obstructive pulmonary disease (COPD).
Respiratory system :
The network of organs and tissues that aids in breathing is known as the respiratory system.
The most common respiratory diseases are :
asthmachronic obstructive pulmonary diseasecystic fibrosislung cancertuberculosisbronchitisProblem causes respiratory system are :
tobacco smoking air pollution allergensoccupational risksPrecautions of respiratory system diseases :
Do not smoke. Improve the indoor air quality .Exercise. Do breathing exercises.regular hand washing.Do not exchange personal items.In respiratory system, Airflow from the lungs becomes obstructed due to chronic inflammatory lung disease called chronic obstructive pulmonary disease (COPD).
To know more about respiratory system:
https://brainly.com/question/1968554
#SPJ1
two solid spheres of radius R made os same steel is placed in contact and exerts a force of f1. if the radius is 3R, what will be the magnitude of gravitational force
The magnitude of the gravitational force 0f two solid sphere of radius R is 81F₁ newton.
Gravitational force :
Any two bodies' mutual attraction is directly proportional to the sum of their masses and inversely proportional to the square of their separation.
Force is given as :
F₁ = (G x m x m )/ (2r)²
To calculate gravitational force :
F₂ = G x [27m x 27m]/ [6r]²
F₂ = (G x27)² m² / 36r²
F₂ = (81 G x m²) / 4r²
F₂ = 81F₁
The magnitude of the gravitational force of two solid sphere of radius R is 81F₁ newton.
To know more about gravitational force :
https://brainly.com/question/12528243
#SPJ1
Whitch is true of high resistsncce wires
The longer a wire is, the higher the resistance will be.
Neither length (L) nor cross-sectional area (A) influences Rh. It totally depends on the type of material used to make the wire. It is somewhat dependent on temperature variation, but this variation is negligible and is disregarded for most purposes.
Let Resistivity be Rh and Resistance be R.
L for the wire's length and A for its cross-section.
This formula relates to resistance.
R=Rh*L/A
Rh, L, and A are the three parameters that determine resistance.
The resistance increases as the wire lengthen.
Less resistance is there the larger the cross-sectional area. (Put A in the denominator; the numerator is L.)
Only take into account the Length variable. As was previously said, shorter wires have lower resistance and vice versa.
Learn more about resistance here:
https://brainly.com/question/17562635
#SPJ1
An object of mass 3.0 kg starts from rest and moves along the x-axis. A net horizontal force is applied to the object in the +x direction. The Force-time graph is shown below. What is the net impulse delivered by the applied force?
Answer:
120
Explanation:
because it is horizontal
An object of mass 3.0 kg starts from rest and moves along the x-axis. A net horizontal force is applied to the object in the +x direction. The Force-time graph is shown below. The net impulse delivered by the applied force is 102 joule.
What is force ?A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Force is used to describe a body's tendency to modify or change its state as a result of an external cause. When force is applied, the body can also alter its size, shape, and direction. kicking a ball, pushing and pulling on the door, or kneading dough are a few examples.
We know the Impulse = Area of the Graph
= ( 6 × 4) + 0.5 × 2 × 6
= 30 sec
For First 4 sec
Acceleration = 6 ÷ 3
= 2 m/sec²
S = 0.5 × 2 × 4²
= 16 m
Therefore, work Done = 6 × 16
= 96 J
Then, Average force
= ( 6 - 0 ) ÷ 2
= 3 N
Acceleration = 1 m/sec²
S = 0.5 × 1 × 2²
= 2 m
Work = 3 × 2
= 6 J
Total Work = 96 + 6
= 102 J
Thus, The net impulse delivered by the applied force is 102 joule.
To learn more about force, follow the link;
https://brainly.com/question/13191643
#SPJ2
a vector of magnitude 20 is added to a vector of magnitude 25 the magnitude of this sum might be?
Answer:
It could be 45 if the vectors are parallel.
It could be 5 if the vectors are antiparallel.
It could be between 5 and 45 for any other arrangement of these two vectors.
Suppose they are at right angles to another then the sum is
(20^2 + 25^2)^1/2 = 32
Select the correct answer. What happens when a negatively charged object A is brought near a neutral object B? A. Object B gets a negative charge. B. Object B gets a positive charge. C. Object B stays neutral but becomes polarized. D. Object A gets a positive charge. E. Object A loses all its charge.
What happens when a negatively charged object A is brought near a neutral object B is that: B. Object B gets a positive charge.
The law of electrostatic forces.According to the law of electrostatic forces, unlike charges attract each other while like charges repel one another.
This ultimately implies that, objects that are having the same charges (like charges) would repel one another, and this causes a transfer of electrons (charges) to any differently charged object which comes in contact with it, through a process known as conduction.
In this context, we can reasonably and logically deduce that the negative charge of object A would induce an opposite charge (positive) on object B when a negatively charged object A is brought near a neutral object B.
Read more on charges here: https://brainly.com/question/1824478
#SPJ1
I JUST NEED ANSWER Mass mA rests on a smooth horizontal surface, mB hangs vertically. a) If mA =15.0 kg and mB =3.0 kg in the figure (Figure 1), determine the magnitude of the acceleration of each block. b) If initially mA is at rest 1.200 m from the edge of the table, how long does it take to reach the edge of the table if the system is allowed to move freely? c) If mB =1.0 kg , how large must mA be if the acceleration of the system is to be kept at [tex]\frac{1}{100}[/tex] g?
a) the magnitude of the acceleration of the block is a = 1.633m/s².
b) time to reach the end by the block is t = 1.1867s.
c) mass of mA if the acceleration of the system is 1/100g is mA = 99kg
a) Given,
mA = 15kg
mB = 3kg
The formula for the Tension in the cord, T =mAmBg / (mA + mB)
T = 45*9.8/18
T =24.5N
In the case of mA, we have T = mA*a
acceleration of mA, a = T/mA
a = 24.5 / 15
a = 1.633m/s²
In the case of mB, we have mB*a = mB*g -T
a = (mB*g -T)/mB
a = (3*9.8 - 24.5) /3
a = 1.633m/s²
b) Initial velocity of mA, u = 0
The distance traveled by mA, s = 1.15m
We have,
s = ut + 1/2at²
t = √(2s/a)
t = 1.1867s
c) mB = 1kg
The acceleration of the system, a = g/100
The acceleration of the system is given by the formula, a = mB*g/ (mA + mB)
mA = [mB*g/a] - mB
mA = [1*9.8*100/9.8] -1
mA = 99kg
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ1
A cube of wood with a density of 0.780 g/cm' is 10.0 cm on each side. When the cube is placed in water, what buoyant force acts on the wood? (pw 1.00 g/cm')
The buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex] And 10.0 cm on each side is 7.644 Newton.
What is density?The density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.
As an illustration, the density of Earth is 5.51 grams per cubic centimeter, whereas the density of water is 1 gram per cubic centimeter.
Given:
The density of wood, ρ = 0.780 g/[tex]cm^3[/tex],
The Side of wood, a = 10 cm,
Calculate the buoyant force by the following formula,
F = - ρ * g * V,
Here, F is the buoyant force.
Substitute the values,
F = - 0.780 * 9.8 * [tex]10^3[/tex] * [tex]10^{-3}[/tex]
F = 7.644 Newton
Therefore, the buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex] is 10.0 cm on each side is 7.644 Newton.
To know more about Density:
https://brainly.com/question/6329108
#SPJ1
jkjkjkjkdd ds fs d fsd ds f ssfd ds a? A ??DS?D
Answer:
hjcyysjjJjxjcmxmmsxjvemmzxjdndmenbxhfnhcjdnuxjd
A sports car accelerates from rest to 103 km/h in 6.5 s. What is its average acceleration in m/s2?
The acceleration of the car is 57.04 [tex]m/s^{2}[/tex]
It is given that a sports car accelerates from rest to 103 km/h in 6.5 s.
So, Initial velocity (u) = 0 m/s { since the car starts from rest }
Final velocity (v) = 103 km/hr = 103 * 18/5 m/s = 370.8 m/s
Now, the time taken (t) = 6.5 seconds.
Acceleration is the measure of how fast the object's velocity changes with respect to time.
Now, Acceleration (a) = Change in velocity/Time taken
So,
[tex]a = \frac{v -u}{t}[/tex]
Putting all the values, we get
[tex]a = \frac{370.8 - 0}{6.5} =\frac{370.8}{6.5} = 57.04[/tex]
Hence, the acceleration of the car is 57.04 [tex]m/s^{2}[/tex]
To read more about acceleration, visit https://brainly.com/question/12550364
#SPJ1
A large water tank is completely filled with water. The tank is 3.0 m high and its surface is open. If a small hole is made on one side of the tank at a height of 0.8 m, calculate the speed with which the water comes out of the pipe.
The speed of the water through the pipe is 4.96 m/s
How to calculate the speed at which the water comes out of the pipe?Since a large water tank is completely filled with water. The tank is 3.0 m high and its surface is open. If a small hole is made on one side of the tank at a height of 0.8 m, to find the speed with which the water comes out of the pipe, we use Bernoulli's equation
What is Bernoulli's equation?Bernoulli's equation governs flows through pipes. It is given by
P₁ + ρgh₁ + 1/2ρv₁² = P₂ + ρgh₂ + 1/2ρv₂² where
P₁ = pressure at point 1,h₁ = height at point 1,v₁ = speed at point 1,P₂ = pressure at point 2,h₂ = height at point 2, andv₂ = speed at point 2Given that
P₁ = atmospheric pressure = 1.013 × 10⁵ Pa,h₁ = height of tank = 3 m,v₁ = speed at top ot tank = 0 m/s (since it is stationary there),P₂ = pressure at bottom of tank = 0 Pa,h₂ = height at hole = 0.8 m, andv₂ = speed at hole = speed of water through pipe and ρ = density of water = 1000 kg/m³So, susbstituting the values of the variables into the equation, we have
P₁ + ρgh₁ + 1/2ρv₁² = P₂ + ρgh₂ + 1/2ρv₂²
1.013 × 10⁵ Pa + 1000 kg/m³ × 9.8 m/s² × 3 m + 1/2 × 1000 kg/m³ × (0 m/s)² = 0 + 1000 kg/m³ × 9.8 m/s² × 0.8 m + 1/2 × 1000 kg/m³ × v₂²
1.013 × 10⁵ Pa + 29400kg/ms² + 0 = 0 Pa + 7840kg/ms² + 5000v²
130700 Pa = 7840kg/ms² + (5000 kg/m³)v²
130700 Pa - 7840 Pa = (5000 kg/m³)v²
122860 Pa = (5000 kg/m³)v²
Making v subject of the formula, we have
v = √(122860 Pa/5000 kg/m³)
= √(130.7/5 Pam³/kg)
= √(24.572 Pam³/kg)
= 4.96 m/s
So, the speed of the water through the pipe is 4.96 m/s
Learn more about speed of the water through the pipe here:
https://brainly.com/question/29472475
#SPJ1
Shawn and his bike have a total mass of 49.9 kg. Shawn rides his bike 0.92 km in 15.4 min at a constant velocity. The acceleration of gravity is 9.8 m/s 2 . What is Shawn’s kinetic energy? Answer in units of J.
Answer:
0 J
Explanation:
KE = .5(m)(v2-v1)
if velocity is constant v2 = v1, then v2 - v1 = 0
therefore if (v2-v1) = 0, then KE must also be equal to 0
Which kind of wave is a wave on the electromagnetic spectrum?
O mechanical wave
O longitudinal wave
O transverse wave
O matter wave
Mechanical wave is a kind of wave is a wave on the electromagnetic spectrum.
What is electromagnetic spectrum?Electromagnetic (EM) waves are cross waves. Their vibrations or oscillations are swapped in electrical and magnetic fields at right angles to the direction of wave travel. The radiation is explained by the amount of energy found in the photons. Radio waves have photons with low energies, and microwave photons ..Electromagnetic waves with smaller wavelengths and higher frequencies include ultraviolet light, X-rays, and gamma rays. Electromagnetic waves with longer kinds of Electromagnetic Waves. Radio Waves have the longest wavelengths of all electromagnetic waves.
So we can conclude that the different types of waves are mechanical and electromagnetic waves. Mechanical waves are divided into transverse and longitudinal waves.
Learn more about electromagnetic here: https://brainly.com/question/25847009
#SPJ1
A lorry pulls forward after initially being stationary, it takes the lorry 40m to reach a speed of 8m/s, calculate the lorry’s acceleration.
Answer:
0.8m/s²
Explanation:
we know,
v² = u² + 2as
here v is final velocity, u is initial velocity, a is acceleration & s is distance travelled.
8² = 0² + 2*a*40
⇒ 64 = 80a
⇒a = 64/80 = 0.8m/s²