Express the answers to the following operations with the proper number of significant figures.

4. 108 x 5. 3

____ X 10^

Answers

Answer 1

The answer to the given operations with proper number of significant figures is 5.7 × 10².

Significant figures or numbers can be defined as those particular numbers or digits which are essential in determining the accuracy of a particular value. For example, 4.392 has 4 significant figures.

When we are rounding off a number to write it with the proper number of significant figures, we first need to decide the amount of significant figures that it should have.

On calculating the given operation,

⇒ 108 × 5.3 = 572.4

In significant figures,

= 5.72 × 10²

To learn more about significant figures here

https://brainly.com/question/29153641

#SPJ4


Related Questions

Select True or False: When lead-209 undergoes beta decay the balanced nuclear equation for this reaction is:

Answers

The statement is False, when lead-209 undergoes beta decay. As the nuclear equation is n ---> p + e- + antineutrino.

Lead-209 is an atom that contains 82 protons and 127 neutrons in its nucleus, meaning that lead-209 is not a neutron. Neutrons are particles that are found in the nucleus of atoms and have no charge. Therefore, lead-209 can't undergo beta decay by emitting a neutron. Beta decay occurs when an unstable nucleus emits a beta particle and an antineutrino, changing the number of protons in the nucleus. The balanced nuclear equation for the beta decay of lead-209 would be Pb-209 (atomic number = 82) --> Bi-209 (atomic number = 83) + e- + antineutrino. The Bi-209 is a isotope of bismuth, which has one more proton than lead-209 and the same number of neutrons.

To know more about beta decay please refer: https://brainly.com/question/25455333

#SPJ4

Question-- Select True or False: When lead-209 undergoes beta decay the balanced nuclear equation for this reaction is: n ---> p + e- + antineutrino

What are the 6 Types of preservatione

Answers

Drying and fermenting are two of the earliest techniques for food preservation. Replacement, recrystallization, permineralization, and unaltered

The term "preservation" refers to all of the procedures used to extend the useful life of archival records. The goal of preservation efforts is to stop information from being lost and to reduce physical and chemical deterioration of documents. You can manage the components in your food and consume healthy food all year round by canning, drying, and freezing.

The obvious goals of conservation are the protection of wildlife and the advancement of biodiversity. The animals we adore won't vanish into oblivion by being protected and preserved for future generations. And we can keep the ecosystem in good shape and working properly.

Learn more about preservation

https://brainly.com/question/29488142

The correct question is as follows

What are 6 types of preservations ?

Modes of preservation:
Unaltered: simple burial, some weathering. ...
Permineralized: very common mode. ...
Recrystallization: very common in calcitic fossils. ...
Replacement: grades from permineralization. ...
Carbonization: organic material is "distilled" under pressure

Choose correct reagent(s) for the conversion below q2 A. a) propyl bromide / AlCl3 b) NBS B. a) propyl bromide / AlCl3 b) Br2 / heat or light C. a) propanoyl chloride with (1) AlCl3 and (2) H2O b) NBS D. a) propanoyl chloride with (1) AlCl3 and (2) H2O b) Br2 / heat or light E. a) Br2 / FeBr3 b) (propyl)2CuLi c) Br2 / light or heat

Answers

D. a) propanoyl chloride with (1) AlCl3 and (2) H2O b) Br2 / heat or light.

What is a reagent?

A reagent is a substance that is used in a chemical reaction to detect, measure, examine, or produce other substances. Reagents are used in many different industries, including pharmaceuticals, environmental testing, and materials science. Reagents can be in the form of a solid, liquid, or gas, and are generally made from a combination of elements, compounds, or mixtures.

a) The reaction of propanoyl chloride with AlCl3 and H2O can be represented as follows:

AlCl3 + H2O + Propanoyl Chloride → Al(OH)3 + HCl + Propanoic Acid

This reaction involves substitution of the chlorine atom in the propanoyl chloride molecule with a hydroxide ion from the AlCl3/H2O mixture.

b) Br2 / heat or light cannot be used to react with propanoyl chloride, as this reaction would require the breaking of the carbon-chlorine bond. This is not possible using Br2 / heat or light.

To know more about reagent,

https://brainly.com/question/26905271

#SPJ4

An ideal ga (which i i a hypothetical ga that conform to the law governing ga behavior) confined to a container with a male piton at the top. (Figure 2) A male wire i attached to the piton. When an external preure of 2. 00 atm i applied to the wire, the ga compree from 6. 40 to 3. 20 L. When the external preure i increaed to 2. 50 atm , the ga further compree from 3. 20 to 2. 56 L. In a eparate experiment with the ame initial condition, a preure of 2. 50 atm wa applied to the ideal ga, decreaing it volume from 6. 40 to 2. 56 L in one tep. If the final temperature wa the ame for both procee, what i the difference between q for the two-tep proce and q for the one-tep proce in joule?

Answers

An ideal gas is a gas composed of a large number of identical molecules that obey the ideal gas law.

What do you mean by Gas?

Gas is a state of matter made of atoms and molecules that are not bound together, allowing them to move freely and take the shape and volume of their container. It is one of the four fundamental states of matter (the others being solid, liquid, and plasma).

The heat exchanged in a two-step process is given by

q = CpΔT + (P1V1 – P2V2)

where Cp is the specific heat capacity of the gas, ΔT is the change in temperature, P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

For the two-step process,

q = CpΔT + (2.00 atm x 6.40 L – 2.50 atm x 3.20 L)

For the one-step process,

q = CpΔT + (2.50 atm x 6.40 L – 2.50 atm x 2.56 L)

The difference in q for the two-step process and the one-step process is

q2 – q1 = (2.50 atm x 3.20 L – 2.00 atm x 6.40 L)

q2 – q1 = (7.68 L atm – 12.80 L atm)

q2 – q1 = -5.12 L atm

Since 1 L atm = 101.3 J, the difference in q for the two-step process and the one-step process is

q2 – q1 = -5.12 L atm x 101.3 J/L atm

q2 – q1 = -517.4 J.

Hence, the difference is -517.4 J.

To know more about Gas,

https://brainly.com/question/27870704

#SPJ4

What is the molarity of a solution in which 0.23 moles of NaCl are dissolved in enough water to make 395.6 mL of solution

Answers

The molarity of NaCl in enough water is 0.582[tex]\frac{mol}{mL}[/tex]

The moles of NaCl is given which is 0.23 and NaCl is dissolved in enough water which makes the solution of 395.6 mL.

The total number of moles of solute present in a given solution per litre is known as its molarity. In contrast to mass, which varies as the system's physical circumstances vary, the volume of a solution changes as a function of changes in the system's physical qualities, such as pressure and temperature. This has an impact on the molality of the solution. The symbol M, sometimes known as a molar, denotes molarity. A solution is considered to be one molar when one gram of the solute dissolves in one litre of the solution.

So, the molarity= [tex]\frac{totalnumber of moles}{total volume }[/tex]

molarity=[tex]\frac{0.23}{0.395}[/tex]

molarity=0.582[tex]\frac{mol}{mL}[/tex]

Hence, the molarity is 0.582.

Learn more about molarity

brainly.com/question/2817451

#SPJ4

Which of the following is a physical property of minerals?

Answers

Answer:

Below

Explanation:

You didn't list any choices but stuff life color, density, texture,hardness, luster are PHYSICAL properties

This is the wrong answer ignore this

What is the most common irony?

Answers

In literary classes, the three most popular types are verbal irony, dramatic irony, and situational irony. When a speaker or narrator says something that contradicts what they mean, what they intend, or what the context necessitates, this is called verbal irony.

What is irony?

One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.

Here,

The three most common varieties in literary studies are verbal irony, dramatic irony, and situational irony. Verbal irony occurs when a speaker or narrator says something that contradicts what they mean, what they intend, or what the context requires.

To know more about irony,

https://brainly.com/question/1695719

#SPJ4

16% of m is 28
16% x m = 28
0.16 x m = 28
m = ...

Answers

Answer:

m=175

Explanation:

100/16 = 6.25

6.25x28 = 175

Answer: To solve this equation for m, you can divide both sides of the equation by 0.16. This will give you:

m = 28 / 0.16

Simplifying the right side of the equation gives:

m = 175

Therefore, m = 175.

Explanation:

Identify the 13 c nmr chemical shift for each carbon atom in a molecule of 1-penten-3-one

Answers

Carbon 1: δ = 2.09 ppm (The C1 atom is a methyl group, and is in a tertiary environment, which typically corresponds to a chemical shift of around 2.09 ppm).

What is chemical shift?

Chemical shift is a term used in NMR spectroscopy to describe the relative difference in the resonance frequency of a nucleus in a molecule compared to a reference frequency.

2. Carbon 2: δ = 11.81 ppm (This is the carbonyl carbon, and is in a sp2 hybridized environment, which typically corresponds to a chemical shift of around 11.81 ppm).
3. Carbon 3: δ = 13.92 ppm (This is the terminal carbon of the pentene chain, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 13.92 ppm).
4. Carbon 4: δ = 16.53 ppm (The C4 atom is a methylene group, and is in a secondary environment, which typically corresponds to a chemical shift of around 16.53 ppm).
5. Carbon 5: δ = 17.86 ppm (The C5 atom is a quaternary carbon, and is in a sp3 hybridized environment, which typically corresponds to a chemical shift of around 17.86 ppm).

To learn more about chemical shift
https://brainly.com/question/8171972
#SPJ4

75g of a potato chip are burned in a calorimeter that contains 2L of water initially at 297K. After the combustion, the temperature rises 12oC. How much heat is involved per gram of potato chip burned

Answers

The amount of heat involved per gram of potato chip burned is 8388J when a 75g of a potato chip are burned in a calorimeter that contains 2L of water initially at 297K.

Given mass of potato chips burned = 75g

Mass of water (m) = 2L = 2000g

Initial temperature (T1) = 297K - 273 = 24oC.

Final temperature after combustion (T2) = 12oC

We know that q = mC∆T where q is heat and C is specific heat of water =  4.2J/g/oC.

q = 2000 x 4.2 x (24-12)

q = 8388J

Hence the heat evolved per gram of potato chip burned is 8388J

To learn more about heat click here https://brainly.com/question/21041726

#SPJ4

which type of reaction is represented by the generic equation AB+CD --->AD+CB?
combustion
decomposition
single replacement
double replacement

Answers

Answer:

4. Double replacement

Explanation:

The generic equation shows that two compounds are being swapped, which is an indication of a double substitution reaction.

¿which type of reaction is represented by the generic equation AB+CD => AD+CB?

Correct answer double replacement.

So the correct answer is D) Double replacement.

The Ka values for nitrous acid HNO_2 and hypochlorous HClO) acid are 4.5 10^{-4} and 3.0 10^{-8}, respectively.
A,Which one would be more suitable for use in a solution buffered at pH = 7.0?
B, What other ion would be needed to make the buffer?

Answers

Nitrous acid HNO_2 would be more suitable for use in a solution buffered at pH = 7.0.The other ion needed to make the buffer would be the conjugate base of the acid, which in this case would be the nitrite ion NO_2^-.

A, The Ka value is an indication of the strength of an acid; the lower the Ka value, the weaker the acid. Therefore, the hypochlorous acid HClO has a weaker acidity than nitrous acid HNO_2 and would be less suitable for use in a solution buffered at pH = 7.0.

B, Buffers work by maintaining a certain pH by providing a source of a weak acid and its conjugate base. Therefore, the other ion needed to make the buffer is the conjugate base of the acid, which in this case is the nitrite ion NO_2^-.

learn more about nitrous acid here

https://brainly.com/question/17055219

#SPJ4

Solid silicon and solid magnesium chloride form when silicon tetrachloride gas reacts with magnesium metal. Write a word equation and an unbalanced formula equation including physical states.

Answers

Solid silicon and solid magnesium chloride form when silicon tetrachloride gas reacts with magnesium metal. the equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

When the solid silicon react with the solid magnesium chloride , the word equation is :SiCl₄(g)  +  Mg(s)  

the product formed is the silicon tetrachloride gas. the word equation is :

Si(s)  +  MgCl₂(s)

The unbalanced equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

The balanced equation for the reaction of the silicon tetra chloride react with the magnesium   and form the silicon  and the solid magnesium chloride.  and t is given :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

To learn more about silicon here

https://brainly.com/question/2571347

#SPJ4

(Question) How many atoms are in 3 grams of Cu?
(20 points)

Answers

Answer: 2.85 x 10^22

Explanation:

We can use stoichiometry to convert grams to atoms.

*Important quantities*

Original amount of Copper: 3 grams

Molar mass of Copper: 63.5 grams

Avogadro's number: 6.022x10^23 atoms/formula units/molecules

Process - [tex]\frac{3gramCu}{1}[/tex]×[tex]\frac{1 mole Cu}{63.5 gCu}[/tex]×[tex]\frac{6.022x10x^{23} }{1 moleCu}[/tex] = 2.84503937×10^22

After taking sig figs into account, the answer needs to be rounded to 3 decimal places

Final answer: 2.85 x 10^22

. The reaction rates of many spontaneous reactions are actually very slow. Which of these statements is the best explanation for this observation? (1) The activation energy of the reaction is large. (2) AG for the reaction is positive. (3) Such reactions are endothermic. (4) The entropy change is negative.

Answers

In reality, spontaneous reactions occur relatively slowly because The reaction's activation energy is high.

Hence, Option 1 is correct.

A spontaneous reaction is one that favors the creation of products in the environment in which it is taking place.Given that spontaneous reactions discharge free energy, the sign of G must be negative. There are four distinct conceivable combinations because both H and S can be either positive or negative depending on the features of the specific reaction.An exothermic example of a spontaneous reaction is a raging campfire (there is a decrease in the energy of the system as energy is released to the surroundings as heat).

Find more information about Activation energy here:

brainly.com/question/1380484

#SPJ4

The following reaction shows the products when sulfuric acid and aluminum hydroxide react.


2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O


The table shows the calculated amounts of reactants and products when the reaction was conducted in a laboratory.


What is the approximate amount of the leftover reactant?

11. 73 g of sulfuric acid

10. 33 g of sulfuric acid

11. 12 g of aluminum hydroxide

13. 67 g of aluminum hydroxide

Answers

The remaining reactant (Aluminum Hydroxide) weighs approximately 11.73 g.

Hence, Option A is correct.

Al(OH)3 has a molar mass of 78 g.H2SO4 has a molar mass of 98 g.Given:Al(OH)3 mass = 30gH2SO4 mass = 35gAl number of moles (OH)3 = 30/78 =0.385H2SO4 mole number = 35/98 = 0.357The provided reaction states that 2Al(OH)3 + 3H2SO4 Al2 (SO4)3 + 6H2OAl, 2 moles (OH)H2SO4 is equal to 3 moles.Al 1 moles (OH)H2SO4 is equal to 3/2 moles.Al 0.385 moles (OH)0.578 moles of H2SO4 are equal to 3 = (3/2) x 0.385 moles of H2SO4.But the amount of H2SO4 is only 0.357 moles.H2SO4 is the limiting reagent as a result.Al(OH)3 is produced when 0.357 moles of H2SO4 react with = 2/3 x 0.357 moles of Al(OH)3.Al(OH)3 leftovers are therefore 0.147 moles (0.385 - 0.238 moles).Al(OH)3 has a molecular weight of 78 g, hence 78 x 0.147 g is one mole.= 11.43 g11.73 g of Al(OH)3 will be left behind as a result.

To know more about limiting reagent here

https://brainly.com/question/14222359

#SPJ4

What is a measuring stick called?

Answers

A measuring stick called meterstick or yardstick.

A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or A measuring stick called meterstick or yardstick.  

A meterstick or yardstick is either a foldable ruler or straightedge which is used to measure the length and it is specially common in the construction industry. Meterstick are made up of plastic or wood and they often have a metal or plastic joints so that they can be folded together. Metersticks are often rectangular and thin. Metersticks are divided with lines for each millimeter and numerical markings per centimeter. Whereas, yardsticks are often marked with a scale in inches. Measuring stick is also known as ruler. For example: We measure the diameter of a circle with a ruler, and also draw a perfectly straight line using its edge.

To know more about metal here

https://brainly.com/question/28650063

#SPJ4

I’ve tried to do the problem but it’s confusing

Answers

Answer:

Explanation:

The equation for calculating the amount of heat released is:

q = mcΔT

where:

q = heat released (in joules)

m = mass of the substance (in grams)

c = specific heat capacity (in J/g·°C)

ΔT = change in temperature (in degrees Celsius)

Given:

m = 30 g

ΔT = 96°C - 25°C = 71°C

c = 4.184 J/g·°C (for water)

so

q = (30 g)(4.184 J/g·°C)(71°C) = 8.91*71 = 635.11 J

Therefore, 635.11 J of heat is released when 30g of water cools down from 96 degree celsius to 25 degree celsius

Note that this calculation is valid only if the process is adiabatic or no heat is exchanged with the environment.

The normal boiling point of Br2(l) is 58.8 ?C, and its molar enthalpy of vaporization is ?Hvap = 29.6kJ/mol.
When Br2(l) boils at its normal boiling point, does its entropy increase or decrease?
increase
decrease

Answers

When Br2(l) boils at its normal boiling point, its entropy increases as it is positive.

What is meant by entropy?

The level of randomness found inside a substance's molecules is known as entropy.

The temperature at which atmospheric pressure and a liquid's vapor pressure are equal is known as the boiling point.

The amount of heat energy required to convert one mole of a substance from its liquid state into its gaseous state at constant temperature and pressure is referred to as the molar enthalpy of vaporization.

Entropy increases when a liquid is heated because the randomness between the molecules increases. As a result, entropy will rise.

To know more about entropy, refer

https://brainly.com/question/419265

#SPJ4

6.0 mol Al reacts with 4.0 mol O2 to form Al2O3.
4A1+30₂ → 2Al₂O3
How many moles of Al2O3 form when 4.0 mol Al reacts?

Answers

2 moles of Al₂O₃ will be produced when 4 moles of Al reacts in accordance with the above equation.

How to calculate moles using stoichiometry?

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, 6.0 moles of Al reacts with 4.0 mol of oxygen gas to form Al₂O₃ as follows:

4Al + 30₂ → 2Al₂O₃

Based on the above equation, 4 moles of Al reacts to form 2 moles of aluminium oxide.

This means that 4 moles of aluminium will produce 4 × ²/4 = 2 moles of aluminium oxide.

Therefore, 2 moles of Al₂O₃ will be produced by 4 moles of aluminium.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

What is the net charge on the following peptide at pH = 0?
Peptide sequence: DSVK
a. net charge = +2
b. net charge = +1
c. net charge = 0
d. net charge = -2

Answers

The net charge on the Peptide sequence: DSVK at pH = 0 is : a. net charge = +2.

What is peptide sequence?

The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand the structure and function of a protein within a cell, which is useful for biomedical research applications.

By convention, the names of peptides are always written from left to right, beginning with the N-terminal end. For example, the name glycyl-histidine-phenylalanine refers to a peptide that comprises glycine at the N-terminus, followed by a histidine, and then phenylalanine at the C-terminus.

To know more about peptide sequencing , refer

https://brainly.com/question/14775253

#SPJ4

How many moles are in 4.0 x 10^24 atoms of silicon?

Answers

Atoms of silicon have 0.15 moles.

[tex]4.0 × 10^2^4[/tex] atoms of silicon.

We have to find the number of moles.

Silicon has the atomic number 14.

One mole of silicon contains [tex]6.023× 10^2^3[/tex] atoms.

[tex]6.023× 10^2^3[/tex]number of atoms are present in one mole of silicon.

[tex]4.0*10^24[/tex]number of atoms will have-

[tex]6.023*10^2^3/4.0*10^2^4=0.15[/tex] moles.

         

Thus atoms of silicon have 0.15 moles.

Learn more about how to find atoms of silicon here:brainly.com/question/29769911

Help me please I have been stuck for some time

Answers

Answer:275.4 g Al2O3

Explanation: The mass of Al2O3 formed is 2.7 mol * 102 g/mol = 275.4 g. This is because the molar mass of Al2O3 is 102 g/mol. This means that when 1 mol of Al2O3 is formed, it has a mass of 102 g. Therefore, when 2.7 mol of Al2O3 is formed, it has a mass of 2.7 mol * 102 g/mol = 275.4 g.

Enrichment Activity 2.


Next up, let us compare the frequencies of different EM waves. Copy and answrr the table on page 16, refer to figure 2, then answer the question that follows.



PA HELP POOOOO

Answers

EM rays, or electromagnetic radiation, is a form of energy that is emitted and absorbed by charged particles.

What are Gamma rays?

Gamma rays are a type of electromagnetic radiation, similar to visible light and x-rays, but with much higher energy. They are produced by the hottest and most energetic objects in the universe, such as neutron stars, pulsars, and black holes. Gamma rays can also be produced artificially, in particle accelerators or nuclear reactions. Gamma rays have the shortest wavelength and highest energy of any type of electromagnetic radiation.

|       Wave       | Frequency (Hz) |

|    Radio Waves   |    < 3 x 10^9 |

|     Microwaves   |     3 x 10^9  |

| Infrared Radiation |    3 x 10^12 |

|   Visible Light  |    4 x 10^14  |

|     Ultraviolet   |    7.5 x 10^14|

|     X-Rays      |    3 x 10^16  |

|   Gamma Rays     |    3 x 10^19  |

Which type of EM wave has the highest frequency?

Gamma Rays have the highest frequency with 3 x 10^19 Hz.

To know more about Gamma rays,

https://brainly.com/question/2399890

#SPJ4

You move a 12-newton box 6 meters across the floor. How much work have you done?

Answers

The amount of work that has been done would be 72 Joules.

What is work done?

The work done by a body can be defined as the amount of energy transferred from one body to another body.  In other words, work is the product of force and the distance moved by the force.

This can be expressed mathematically as:

Work = force x distance moved by the force.

In this case:

Force = 12 newton

Distance = 6 meters

Work done = 12 x 6

                   = 72 NM or 72 Joules

In other words, if I move a 12 Newton box by 6 meters across the floor, the amount of work done would be 72 Joules.

More on work done can be found here: https://brainly.com/question/13662169

#SPJ1

Classify the reaction in each of the following equations.
a. FeCl2 (aq) + Mg → MgCl2 (s) + Fe(s)

b. NH3 (g) → N2 (g) + H2 (g)

Answers

Answer

a. Single displacement

b. Decomposition

When classifying chemical reactions, consider how reactants change to form the products.

An equation for a chemical reaction has a left side and a right side. The arrow separates the left and right sides.

The left side is called the reactants. The right side is called the products.

Each product or reactant can be one or more elements.

Some Types of Reactions

We can use letters* to represent products and reactants in a reaction.

Synthesis

Two reactants become one product.

A + B  →  ABDecomposition

One reactant becomes two products.

AB  →  A + BIn equation (b), this is like how NH₃ separated into two products, N₂ and H₂.

Single Displacement

Start with two reactants, a compound and an element. To form the products, the element replaces one of the elements that was in the compound.

AB + C  →  AC + BIn equation (a), this is like how Mg replaced Fe. Fe was part of a compound at first. Now, Mg is part of a compound instead.Double Displacement

Start with two reactants that are compounds. To form the products, an element from each compound replaces each other.

AB + CD  →  AC + BD

Therefore, equation (a) is a single displacement reaction and equation (b) is a decomposition reaction.

*Each letter represents an element. Two elements make a compound. A letter can also represent a compound if compound stays together during the reaction.

Learn more about displacement reactions here:

https://brainly.com/question/13219117

Calculate the mass of metal oxide produced during the decomposition of 1280 g of 77.5% pure magnesium carbonate!

Answers

Decomposition of one mole of magnesium carbonate (84 g) produces one mole of magnesium oxide (40 g). Thus, 1280 g of magnesium carbonate will produce 609 g of MgO.

What is magnesium carbonate?

Magnesium carbonate is an ionic compound formed by donation of two electrons from magnesium metal to the carbonate group.

The decomposition reaction of magnesium carbonate is written below:

[tex]\rm MgCO_{3} \rightarrow MgO + CO_{2}[/tex]

As per this reaction, one mole of magnesium carbonate produces one mole of MgO.

molar mass of MgCO₃ = 84 g/mol

molar mass of MgO = 40 g/mol

84 g of  MgCO₃  gives 40 g of MgO. Then the mass of MgO produced by 1280 g of MgCO₃  is:

mass of MgO = (1280 × 40)/84 = 609 g.

Therefore, the mass of MgO produced is 609 g.

Find more on MgCO₃ :

https://brainly.com/question/27280608

#SPJ1

how could you use this pattern to predict how the element may behave in a chemical reaction

Answers

Answer:

it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.

Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.

When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.

For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.

₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n

It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.

We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.

Show the more stable carbocation that forms through a 1. 2−shift. Be sure to answer all parts. Part 1 out of 2 Show the more stable carbocation that forms through a 1,2-shift.
Be sure to answer all parts. Part 1 out of 2 Show the more stable carbocation that forms through a 1,2-shift.

Answers

The more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.

A 1,2-shift is a rearrangement of a carbon-carbon double bond, where one of the carbons moves two positions away from its original location with its original bonding partner following it. This creates a carbocation intermediate, with the carbon that moved being the positively charged center. Since tertiary carbocations are the most stable of the carbocation intermediates, the more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.

The more stable carbocation that forms through a 1,2-shift is a tertiary carbocation.

learn more about carbocation here

https://brainly.com/question/13164680

#SPJ4

Select True or False: As opposed to chemical reaction, nuclear reactions have a significant (measureable) mass change relative to the mass of the reacting species.

Answers

The given statement is true as in the radioactive decay results in significant mass loss.

When uranium nuclei go through radioactive decay, a number of their mass is transformed into kinetic energy (the electricity of the transferring particles). This conversion of electricity is determined as a lack of mass. When it decays, a radionuclide transforms right into a one-of-a-kind atom - a decay product. The atoms maintain remodeling to new decay merchandise till they attain a solid country and are now not radioactive. This radioactivity is a part of earth's herbal device and is the principle purpose of warmth in the earth and the using pressure for earth's tectonic device which results in volcanoes, earthquakes and plate tectonics.

Thus, the given statement is true.

To learn more about radioactive decay check the link below:

https://brainly.com/question/9932896

#SPJ4

Other Questions
Aldosterone inhibitors are prescribed to patients with advanced heart failure. A common side effect of these drugs is __________. A heavy rainstorm damages this year's crop of peanuts. The price of peanut butter increases. What will happen to the demand of jelly?Answer the 3 questions below related to this scenario.Complete sentences are not required. Please number each answer.1. Will there be an increase or decrease?2. Which way will the graph shift?3. What is the determinant? 3. 2 Roulette wheel: The game of roulette involves spinning a wheel with 38 slots: 18 red, 18 black, and 2 green. A ball is spun onto the wheel and will eventually land in a slot, where each slot has an equal chance of capturing the ball. a) You watch a roulette wheel spin 9 consecutive times and the ball lands on a red slot each time. What is the probability that the ball will land on a red slot on the next spin? (please round to four decimal places) b) You watch a roulette wheel spin 320 consecutive times and the ball lands on a red slot each time. What is the probability that the ball will land on a red slot on the next spin? x (please round to four decimal places) List some circumstances/situations that can change you into a totally different person What is a pivot arm lever? The probability that a student chosen at random from a class has ginger hair is 5/14.The probability that they have blonde hair is 9/28.What is the probability that a student chosen from the class at random has either ginger or blonde hair?Give your answer as a fraction in its simplest form. What are 3 things that support the theory of evolution? what is your opinion about what constitutes good or bad usage. ind the Average Rate of Change of the table below for the interval 0 < x < 4 What are 3 examples of perfect squares? Describe someone whom you have met that you feel is a leader. Why do you consider this person a leader What religions allow premarital sex? Find the product using any method. (Need some help!!) How did Enlightenment thinkers influence democratic governments and revolutions? A staff meeting is called at a large company. The main speaker at the meeting is an outside consultant who will be speaking about safety in the workplace. What kind of audience will the staff most likely be? Given:sin (C) 4/9Find tan (C) How did industry affect the war effort? Please help answer question How does a meter stick measure reaction time? Spreadsheets are super helpful in helping you stay organized when calculating recipe costs because they have different rows and columns to track all your _____ individually and what they cost.Question 1 options:ideascustomersingredientsreviewsQuestion 2 (1 point) Ryan is a baker who likely does what to his ingredients rather measuring them out with cups?Question 2 options:splitting upsharingweighing outcultivatingQuestion 3 (1 point) What company has a trade secret that claims to use "eleven herbs and spices," supposedly scribbled on a piece of yellow notepaper inside an iron safe in Louisville, Kentucky, and as the story goes, the safe is actually a vault surrounded by cameras, motion-detectors, and even guards!Question 3 options:Chik-Fil-ACoca ColaMcDonald'sKentucky Fried ChickenQuestion 4 (1 point) What kind of measuring device comes in sets, with each part of the set holding a pre-determined volume and increasing in size from to 1?Question 4 options:strain measuring spoonsconversion measuring spoonstare measuring cupsstandard measuring cupsQuestion 5 (1 point) What kind of cups for measuring are sometimes made from glass or something transparent so the markings on the side with different measurements are visible?Question 5 options:graduated measuring cupsstandard measuring cupstare measuring cupsMaillard measuring cupsQuestion 6 (1 point) Schools, hospitals, prisons, universities, summer camps, and government buildings are just a few examples of the types of institutions and commercial kitchens that depend on what kind of recipes on a daily basis?Question 6 options:trade secret recipessmall volume recipesimprovised recipesstandardized recipesQuestion 7 (1 point) As a big-time chef, your job entails nothing more than simply putting out spectacular food.Question 7 options:TrueFalseQuestion 8 (1 point) Rice never loses its food value, regardless of how many times its rinsed.Question 8 options:TrueFalseQuestion 9 (1 point) When a food cost analysis is properly done, it can serve as a tool to monitor your overall expenses so you can make a profit and stay within the confines of your budget.Question 9 options:TrueFalseQuestion 10 (1 point) When looking for consistency and reliability, in cooking and other endeavors, it's far better to rely on what rather than guesswork?Question 10 options:intuitionhypothesesnumbersestimatesQuestion 11 (1 point) Most failing restaurants find themselves in trouble because they do not understand the what that is associated with what they are doing?Question 11 options:costtimeresilienceintegrityQuestion 12 (1 point) When adhering to the ABCs of eating when planning out your diet, ensuring that you are not too heavy on fat, salt, or sugar means that you are using what?Question 12 options:adequacymoderationvarietybalanceQuestion 13 (1 point) Inventory control provides predictable information on the quantity of ingredients needed for each _____ cycle.Question 13 options:revenuestandardizednutrientproductionQuestion 14 (1 point) As delightful as it is to design a delicious, exciting, and colorful menu, it is equally as important to see the hidden costs and risk behind every decision.Question 14 options:TrueFalseQuestion 15 (1 point) What happens to ingredients through the process of trimming, cleaning, and cooking?Question 15 options:They shrink.They grow.They disintegrate.They multiply.