Explain why sound wave travel faster in liquids than in gases

It is called static electricity because Charges cannot easily flow, hence option C is the answer.

Static electricity is called "static" because the charges are not free to move around easily. They tend to build up on the surface of an insulator and remain in place, rather than flowing like current in a conductor.

This buildup of charge can occur due to friction, induction, or any other mechanisms in the conductor. Therefore, option C is the correct option that says "Charges cannot easily flow".

To know more about static electricity, visit,

https://brainly.com/question/821085

#SPJ1

The boy weighing 600 N can walk at most 4.1 m beyond point A without tipping the beam.

It is the weighted average position of all the system's or object's constituent pieces. It is the average position of all the parts of the system or object, weighted according to their mass. In other words, the center of mass is the point where an applied force will result in pure translation of the object, without any rotation.

To avoid tipping, the center of mass of the beam and the boy together must remain over the area between the two supports. Let's first find the center of mass of the beam.

The weight of the beam is 300 N and it is uniform, so its center of mass will be located at the midpoint, or 4.5 m from either support.

Next, we need to find the center of mass of the boy-beam system as the boy walks along the beam. Let's assume the boy moves a distance d to the right of point A before tipping occurs. The weight of the boy is 600 N and we can approximate his weight as acting at the center of his body, which we'll assume is 0.9 m from the left end of the beam. The combined center of mass of the boy-beam system will be at a distance (4.5 m + 0.9 m + d) from the left end of the beam.

For the system to remain stable, this combined center of mass must remain between the two supports, which are 5.00 m apart. Therefore, we can write:

4.5 m ≤ 4.5 m + 0.9 m + d ≤ 9.5 m

Solving for d, we get:

d ≤ 4.1 m

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ1

The distance the ball was thrown is 52.22m by A quarterback throws a pass at an angle of 35° above the horizontal with an initial speed of 25 m/s. The ball is caught by the receiver 2.55 seconds later.

Every motion under constant acceleration is projectile motion

Angle above horizontal Ф = 35°, initial speed v1 = 25m/s , time 2.55s

Substituting value in the below equation

x=x₁ + (v₁*cosθ)(t)+1/2 *a*t²

a= 0 as acceleration in horizontal direction is zero

x= 25*cos(35)*2.55

x=52.22 m

Projectile motion is a form of motion in which object influenced when it is launched into the gravitational force from the surface of Earth along a curved path.

For more information on projectile motion kindly visit to

https://brainly.com/question/11049671

#SPJ1

Answer:

the magnitude of the electrostatic force between these two charged particles is 4.32 x 10^-28 N.

Explanation:

F = k * (q1 * q2) / r^2

where:

F is the electrostatic force

k is the Coulomb's constant (9 x 10^9 Nm^2/C^2)

q1 and q2 are the charges of the particles

r is the distance between the particles

Plugging in the given values:

q1 = 8 x 10^-19 C

q2 = 4.8 x 10^-19 C

r = 1.2 x 10^-4 m

k = 9 x 10^9 Nm^2/C^2

we can calculate the electrostatic force:

F = (9 x 10^9 Nm^2/C^2) * (8 x 10^-19 C) * (4.8 x 10^-19 C) / (1.2 x 10^-4 m)^2

F = 4.32 x 10^-28 N

The electrostatic force between these two particles is therefore calculated to be **1.44x10⁻¹⁴ N**1 using Coulomb's equation of electrostatic force.

With a force proportional to the product of the charges and inversely proportional to the square of the distance between them, Coulomb's law states that like charges repel and opposite charges attract. There is a formula that may be used to calculate the force between two point charges. Charles-Augustin de Coulomb created Coulomb's law in 1785

The electrostatic force between two charges is inversely proportional to the square of the distance between them and directly proportional to the product of their magnitudes1.

The centers of the two tiny charged particles in this example are separated by a distance of **1.2x10⁻⁴ meter**, with charges of **8x10⁻¹⁹** and **4.8*10⁻¹⁹**, respectively.

F is the electrostatic force

k is the Coulomb's constant (9 x 10⁹ Nm²C²)

q1 and q2 are the charges of the particles

r is the distance between the particles

Plugging in the given values:

q1 = 8 x 10⁻¹⁹ C

q2 = 4.8 x 10⁻¹⁹C

r = 1.2 x 10⁻⁴ m

k = 9 x 10₉ Nm²/C²

we can calculate the electrostatic force:

F = (9 x 10⁹Nm²/C²) * (8 x 10⁻¹⁹ C) * (4.8 x 10⁻¹⁹ C) / (1.2 x 10⁻⁴ m)²

The electrostatic force between these two particles is therefore calculated to be **1.44x10⁻¹⁴N**1 using Coulomb's equation of electrostatic force.

To know more about coulomb law visit:

brainly.com/question/21083799

#SPJ1

The acceleration of mass, m2 is determined as 4.2 m/s².

The acceleration of mass, m2 is calculated by applying Newton's second law of motion, which states that force applied to a body is proportional to the product of mass and acceleration of the body.

F(net) = ma

m2g - m1g = m2a + m1a

a = (m2g - m1g)/(m2 + m1)

where;

a = (5 x 9.8  -  2 x 9.8)/(5 + 2)

a = 4.2 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The composition of the nucleus of bismuth-214 can be described using its nuclide notation, which consists of the element symbol, atomic number, and mass number.The element symbol for bismuth is Bi, which has an atomic number of 83, meaning that all atoms of bismuth have 83 protons in their nucleus.The mass number of bismuth-214 is 214, which means that a typical bismuth-214 nucleus contains 83 protons and 131 neutrons (since mass number = number of protons + number of neutrons).Therefore, the nucleus of bismuth-214 can be represented by the nuclide notation: ^214Bi.

"Greenland ice sheet melting at alarming rate of 8,300 tonnes per second" is a recent article addressing some aspect of environmental science that we have covered so far this year.

This article, published in The Guardian in January 2021, addresses the melting of the Greenland ice sheet, which is a topic covered in environmental science. The article highlights a new study that found the ice sheet is melting at a rate of 8,300 tonnes per second, which is seven times faster than in the 1990s.

The melting of the Greenland ice sheet contributes significantly to rising sea levels and could have disastrous consequences for coastal communities worldwide. The article discusses the causes and potential consequences of this rapid melting, as well as the urgent need for action to mitigate climate change and its effects. This topic relates to the study of climate change, the cryosphere, and the impacts of human activity on the environment.

To learn more about environmental science, here

https://brainly.com/question/4593618

#SPJ1

Answer:

N/A

Explanation:

The following formula can be used to compute the power output of a person lifting a lawnmower:

Work (W) / Time (t) = Power (P).

Where:

Work (W) is defined as the force used to lift the lawnmower multiplied by the distance traveled (i.e., work done against gravity).

Time (t) is the amount of time it takes to lift the lawnmower.

To determine the power output, however, we would need to know the force used to lift the lawnmower as well as the distance it was lifted. We won't be able to provide an accurate power output value without this information.

substitute       d = 30     into formula

                        v = 15      d = v x t

                        30 = 15t

                        30/15 or 30 over 15 fraction :)

                        simplify

                             =

                             2

                        answer = 2

I hope this helps, this is what I know, I'm sorry if it's wrong :(

Explanation:

f= 50Hz

wavelength= 20m

Speed of wave (v) = frequency × wavelength

= 50×20

= 1000m/s

The bicyclist needs to move backward by a distance of 0.2744 m to reach the nearest point of destructive interference.

The wavelength of the sound wave produced by the horns can be calculated as;

λ = v/f

λ = 343/625

λ = 0.5488 m

let the integer multiple of the wavelength = d

d = mλ

d = 4.50 + x

where;

4.50 + x = mλ

4.50 + x = m(0.5488)

let the odd multiple of half the wavelength = d'

d' = (2n + 1)(λ/2)

d' = 4.50 - y

where;

4.50 - y = (2n + 1)(λ/2)

4.50 - y = (2n + 1)(0.2744)

mλ = 2n(λ/2) + (λ/2) + 4.50 - y

x - y = (2n + 1)(λ/2) - 4.50

x - y = (2n + 1)(0.2744) - 4.50

Let n = 0

x - y = (0 + 1)(0.2744) - 4.50

y = 4.50 - 0.2744

y = 4.2256

The distance is cakculated as;

4.50 - y = 0.2744 m

Learn more about destructive interference here: https://brainly.com/question/23594941

#SPJ1

One red blood cell contains an estimated 251 molecules of haemoglobin, according to our estimation.

The average red blood cell has a diameter of 6 to 8 micrometres, according to the American Society of Haematology, and a volume of 113-268 μm³ or 113-268x10⁻¹² L.

Let's first change the haemoglobin concentration from grammes per litre to grammes per litre so that it has the same units as the molecular weight:

200 μg/μL x 1 g/1000 μg x 10⁶ μL/L = 0.2 g/L

Next, let's translate hemoglobin's molecular weight from kDa to grammes per molecule:

64 kDa x 1000 Da/kDa x 1.66x10⁻²⁴ g/Da = 1.06x10⁻²⁰ g/molecule

Using Avogadro's number, we can now determine how many haemoglobin molecules are present in a single litre of blood ([tex]6.022*10^{23}[/tex] molecules/mol): 0.2 g/L x 1 mol/1.06x10⁻²⁰ g x [tex]6.022*10^{23}[/tex] molecules/mol = 1.13x10¹⁵ molecules/L.

Divide the total number of molecules in 1 litre of blood by the volume of red blood cells to get the amount of haemoglobin molecules per red blood cell. The typical red blood cell count range, according to the American Society of Haematology, is between 4.5-5.5 million cells/L, which translates to 4.5-5.5x10¹² cells/L.

When we divide the quantity of red blood cells in 1 L by the quantity of haemoglobin molecules, we get:

1.13x10¹⁵ molecules/L / 4.5x10¹² cells/L = 251 Red blood cell haemoglobin molecules, rounded to the closest integer.

To know more about hemoglobin, visit:

brainly.com/question/15011428

#SPJ1

a) Yes, the force of thrust of the engine does work as it is causing the plane to accelerate and lift off the ground.

b) Yes, the kinetic energy of the plane increases as it takes off and gains speed.

c) Yes, the gravitational potential energy of the plane increases as it gains height.

d) Yes, the force of thrust of the engine changes the mechanical energy of the plane.

The kinetic energy of an object is the form of energy that it possesses due to its motion which is also defined as the work needed to accelerate a body of a given mass from rest to its stated velocity.

The work done by the engine's thrust increases the plane's kinetic energy and gravitational potential energy, thereby changing its mechanical energy.

Learn more about kinetic energy  at:

https://brainly.com/question/8101588

#SPJ1

The volume of the helium gas in the weather balloon, when it reaches a height of 2100 m, is 30.85 m^3.

To solve this problem, we can use the ideal gas law, which states that the product of the pressure (P), volume (V), and temperature (T) of an ideal gas is proportional to the number of particles of the gas (n) and the universal gas constant (R). Since the temperature is assumed to be constant, we can write:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume of the helium gas, and P2 and V2 are the pressure and volume at a height of 2100 m.

At sea level, the pressure is approximately 1.01×10^5 Pa, so we have:

P1 = 1.01×10^5 Pa

V1 = 25.0 m^3

At a height of 2100 m, the pressure is 0.82×10^5 Pa, so we can solve for V2:

P1V1 = P2V2

V2 = (P1*V1)/P2

V2 = (1.01×10^5 Pa * 25.0 m^3) / (0.82×10^5 Pa)

V2 = 30.85 m^3

Therefore, the volume of the helium gas in the weather balloon when it reaches a height of 2100 m is approximately 30.85 m^3.

To learn more about the ideal gas law click:

https://brainly.com/question/30458409

#SPJ1

To calculate the final temperature of an air-metal mixture, we need to use the principle of heat transfer.

The heat transfer equation states that the heat gained by the metal is equal to the heat lost by the air. This equation can be written as:

mcΔT = mairCpΔT

To make a prediction of the final temperature, we need to consider factors such as the thermal conductivity of the metal and air, the specific heat capacities of the materials, and the heat transfer coefficients at the metal-air interface. Additionally, the shape and size of the metal object and the surrounding environment can affect the final temperature.

Learn about heat transfer here https://brainly.com/question/25898569

#SPJ1

Answer:

The resistance is 6 ohms

Explanation:

V = 12V

I = 2A

Use ohm's law:

R = V / I

R = 12V / 2A

R = 6 ohms

The power in kilowatts (kW) of a realistic ocean wave is 40 kW.

option B.

The power in kilowatts (kW) of a realistic ocean wave can be estimated using the following formula:

Power (kW) = 0.5 x (Crest Length in meters) x (Wave Height in meters)^2 x (Wave Period in seconds) x (Density of Water in kg/m^3) x (Gravity in m/s^2)

Given the wave parameters for the Baltic Sea: wave height of 1.25 m, wave period of 5 s, and a crest length of 10 m, we can plug in these values to calculate the power.

Wave height (H) = 1.25 m

Wave period (T) = 5 s

Crest length (L) = 10 m

Density of water (ρ) = 1025 kg/m^3 (typical value for sea water)

Gravity (g) = 9.81 m/s^2 (typical value on Earth)

Plugging in these values into the formula:

Power (kW) = 0.5 x 10 x (1.25)^2 x 5 x 1025 x 9.81

Calculating the above expression, we get:

Power ≈ 40 kW

Learn more about Eletric power here: https://brainly.com/question/28790634

#SPJ1

a) The main advantages of an epicyclic gearbox are:

b) i) Using the formula for the gear ratio of an epicyclic gear train:

T4/T3 = (t2/t1) x (t5/t2) x (t4/t5)

T4/30 = (1/2) x (60/20) x (40/60)

T4 = 40 Nm

ii) From the law of gearing for an epicyclic gear train:

w21 = (t3/t2) x (t5/t4) x w31 - (t3/t2) x w2

Substituting the given values:

w21 = (30/20) x (60/40) x 200 - (30/20) x 100

w21 = 150 rad/s

iii) The fixing couple that must be applied to wheel 5 can be found from the power transmitted by the gear train:

P = w3 x T3 = w2 x T2 = w1 x T1

Substituting the given values:

9 kW = 200 rad/s x 30 Nm = w2 x T2 = w2 x 20 Nm

w2 = 450 rad/s

T2 = (9 kW) / (450 rad/s) = 20 Nm

The fixing couple that must be applied to wheel 5 is equal in magnitude and opposite in direction to T2, so it is -20 Nm.

iv) The tangential force at the pitch point between wheels 3 and 4 can be found from the formula:

Ft = (2 x Pd) / (m x z3)

where Pd is the diametral pitch, m is the module, and z3 is the number of teeth on wheel 3.

Substituting the given values:

Pd = 25.4 / 5 = 5.08 teeth/inch

z3 = t3 / m = 30 / 5 = 6 teeth

Ft = (2 x 5.08) / (5 x 6) = 0.846 N

Find out more on gearbox here: https://brainly.com/question/16782058

#SPJ1

The traffic cop needs 23.3 seconds to pass the automobile.

When your velocity (not speed) changes, you are accelerating. A automobile moving at a steady 100 km/h in a straight line has no acceleration. Average acceleration is equal to (change in velocity) / (duration). The car's acceleration is zero because its change in velocity is also zero.

[tex]d1 = v1*t1 = 35.0 m/s * 1 s = 35.0 m[/tex]

[tex]d = d1 = 35.0 m[/tex]

[tex]d2 = v2*t + (1/2)at^2[/tex]

[tex]d2 = (1/2)at^2[/tex]

[tex]v2*t + (1/2)at^2 = (1/2)at^2[/tex]

[tex]v2*t = (1/2)at^2[/tex]

Solving for t, we get:

[tex]t = (2v2/a) = (235.0 m/s)/3.0 m/s^2 = 23.3 s[/tex] (rounded to 2 decimal places)

To know more about velocity  visit:-

https://brainly.com/question/17127206

#SPJ1

The power will increase by about 9.27% (when rounded to two decimal places).

Therefore, the correct answer choice is (b) 9.

The power generated by a windmill is proportional to the cube of the wind speed and which means that if the wind speed increases by 3%, the power generated will increase by:

(1.03)^3 −1 = 0.0927

In physics, power is described as the amount of energy transferred or converted per unit time. In the International System of Units, the unit of power is the watt.

So the power will increase by about 9.27%

Learn more about power at: https://brainly.com/question/1634438

#SPJ1

Answer:

We are asked to calculate for the resultant displacement.

We therefore conclude that the resultant displacement of the bird is 5 Km, 53o 5 K m , 53 o South of West.

Explanation:

have a nice day.

Answer:one centimeter is equal to one hundredth of a meter (1 cm = 0.01 m).

Explanation:

The Pennsylvanian towns of Donora were struck by a smog at the end of October 1948 that forever altered the way environmental protection was practiced in the country.

During this, 20 people were confirmed dead, according to conservative estimates, while 5900 more people, or 43% of Donora's population, were adversely affected by the smog.

A firetruck and an ambulance from Donora's first responders started responding to calls. These rescue cars had to be led by a man walking in front carrying a torch due to the darkness. Later, when this technique was rendered impossible, firefighters started going door to door to give residents of Donora oxygen. Doctors advised anyone with long-term medical concerns to leave, but as the fog grew thicker, the routes became impassable.

To learn more about Donora tragedy, click:

https://brainly.com/question/7040956

#SPJ1

Claims that if temperature is kept constant, the end result of both volume and pressure is constant. The new level is 1036 Pa, which is how this can be expressed.

So either a strong force or a strong force applied over a short area can cause a lot of pressure. When we stand up compared to when we are walking, more of our feet are in proximity to the earth. Pressure would be lower if there was more surface area in contact.

An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. There are both living things and non-living objects in the concept of a force.

To know more about force visit :

https://brainly.com/question/13191643

#SPJ1

The electric potential energy lost in this reaction is approximately 2.81 eV.

What is potential energy?

To calculate the electric potential energy lost in this reaction, we first need to calculate the difference in electric potential energy between the initial and final states. We can use the following formula to calculate electric potential energy:

E = kq1q2/r

where E is the electric potential energy, k is Coulomb's constant (8.99 x [tex]10^{9}[/tex] N*m²/C²), q1 and q2 are the charges of the two particles, and r is the separation distance between them.

In this case, we have an electron and a proton, which have charges of -1.602 x [tex]10^{-19}[/tex]  C and +1.602 x [tex]10^{-19}[/tex]  C, respectively. The initial separation distance is 0.115 nm, which is 1.15 x [tex]10^{-10}[/tex]  m, and the final separation distance is 0.105 nm, which is 1.05 x [tex]10^{-10}[/tex]  m.

So, the initial electric potential energy is:

E_initial = kq_electronq_proton/r_initial

= (8.99 x [tex]10^{9}[/tex]  N*m²/C²) * (-1.602 x [tex]10^{-19}[/tex] C) * (1.602 x [tex]10^{-19}[/tex]  C) / (1.15 x [tex]10^{-10}[/tex] m)

= -1.44 x [tex]10^{-18}[/tex]  J

And the final electric potential energy is:

E_final = kq_electronq_proton/r_final

= (8.99 x [tex]10^{9}[/tex] N*m²/C²) * (-1.602 x [tex]10^{-19}[/tex]  C) * (1.602 x [tex]10^{-19}[/tex]  C) / (1.05 x [tex]10^{-10}[/tex]  m)

= -1.89 x [tex]10^{-18}[/tex] J

The electric potential energy lost in this reaction is:

ΔE = E_final - E_initial

= (-1.89 x [tex]10^{-18}[/tex] J) - (-1.44  x [tex]10^{-18}[/tex] J)

= -0.45 x [tex]10^{-18}[/tex]   J

To express the electric potential energy lost in units of eV, we can use the following conversion factor:

1 eV = 1.602 x [tex]10^{-19}[/tex] J

So, the electric potential energy lost in this reaction is:

ΔE = (-0.45 x [tex]10^{-18}[/tex] J) / (1.602 x [tex]10^{-19}[/tex] J/eV)

= -2.81 eV

Therefore, the electric potential energy lost in this reaction is approximately 2.81 eV.

To know more baout electric potential energy, visit:

https://brainly.com/question/16267680

#SPJ1

The speed of the wave is 99 meters per second.

What is Wave?

A wave is a disturbance or variation that travels through a medium or space, transferring energy without the net movement of matter. Waves can occur in various forms, such as mechanical waves that require a medium for propagation (e.g., sound waves, water waves) or electromagnetic waves that can travel through a vacuum (e.g., light waves, radio waves).

The speed of a wave can be calculated using the formula:

speed (v) = frequency (f) x wavelength (λ)

Given that the frequency (f) is 11 Hz and the wavelength (λ) is 9 meters, we can plug these values into the formula to calculate the speed of the wave:

v = 11 Hz x 9 meters

v = 99 meters per second

Learn more about Wave from the given link

https://brainly.com/question/25699025

#SPJ1

Answer:

A

Explanation:

One of the main benefits of informational interviewing is that it allows the person conducting the interviews to gain insights and information about a particular career or industry.