Experiment by hanging your first object (object 1) on the hook. Hold on to the cardboard, and position the cardboard and string so the object dangles just off the edge of the table. Then let go of the cardboard. If it moves, stop it when it reaches the edge of the table. Repeat the steps by replacing object 1 with object 2 on the hook. Finally, hang object 1 and object 2 together on the hook and repeat the steps. What do you observe when you hang different objects from the hook? What happens when two or more objects are on the hook together?

This reaction is an example of double displacement reaction.

When two reactants change ions to create two new compounds, the reaction is referred to as a double displacement reaction. Double displacement reactions usually result in the development of a precipitate as a product.

The positive-charged cations and negative-charged anions of the reactants swap places (double displacement) to generate two new products in this sort of reaction. Also called: A metathesis reaction or a double replacement reaction are other names for a double displacement reaction.

The equation becomes:

AlBr₃ + K₂SO₄ → KBr + Al₂(SO₄)₃

Aluminium bromide (AlBr₃) reacts with potassium sulphate (K₂SO₄) to form potassium bromide (KBr) along with aluminium sulphate (Al₂(SO₄)₃).

Balanced reaction becomes:

2AlBr₃ + 3K₂SO₄ → 6KBr + Al₂(SO₄)₃

2 mol      3 mol       6 mol    1 mol

In this reaction, two moles of aluminium bromide react with three moles of potassium sulphate to produce six moles of potassium bromide along with one mole of aluminium sulphate.

So, this reaction is an example of double displacement reaction.

To know more about double displacement reaction refer to:

https://brainly.com/question/23918356

#SPJ1

The radiation dosage in rads for a 65 ‑kg person that is exposed for 4.0 s to a 3.0 Ci source of beta radiation is 8.54 x 10⁻⁴ J/kg.

Radiation is defined as the energy that can be depicted as waves or particles and travels from one location to another. The DNA in our cells can be harmed by radiation.

The radiation dosage is determined by the ratio of the total dose to the exposed person's mass.

3 Ci beta radiation = 3 x (3.7x10¹⁰) = 11.1 x 10¹⁰decay/s.

Total beta energy taken in over 5 seconds

Et  = ( 11.1 x 10¹⁰ ) x 5 x 1.0 x 10⁻¹³

Et = 55.5 x 10⁻³

The person's radiation dose is estimated as follows;

Rd = ET / m

Rd = 55.5 x 10⁻³ / 65 kg

Rd = 8.54 x 10⁻⁴ J/kg.

Thus, the radiation dosage in rads for a 65 ‑kg person that is exposed for 4.0 s to a 3.0 Ci source of beta radiation is 8.54 x 10⁻⁴ J/kg.

To learn more about radiation, refer to the link below:

https://brainly.com/question/13934832

#SPJ1

Answer:

12.4 g

Explanation:

M=1.25M

v=0.16L

molar mass = 62 g per mole

M=n/v

n=M*v

n=1.25M*0.16

mass of substance = n * M

m=0.2mole *62 g/mole

m=12.4g

It's a great day at the beach, and you're there for some fun and sun! One reason the day is so special is that the weather is so pleasant—sunny and warm. Energy from the sun warms the beach with Radiation. The breeze is warm enough to keep you warm, but it also keeps you from overheating. Ocean breezes move because energy is Convection. When you lie down on the sand, you spread a beach towel down so that the sand will not make you too hot by transferring heat by Conduction.

Radiation is energy that comes from a source and travels through space at the speed of light. This energy has an electric field and a magnetic field.

Heat is transferred through convection, which is the large-scale movement of molecules inside gases and liquids. Conduction is used to move heat from the object to the fluid initially, but fluid motion is responsible for the bulk of the heat transfer.

Heat energy is transferred through the mechanism of conduction when nearby atoms or molecules collide. In solids and liquids, where particles are more closely spaced, conduction happens more easily than in gases, where particles are more widely spaced.

To know more about Ways of heat Transfer :

brainly.com/question/12342626

#SPJ4

After considering the results of the classification tests, the possibilities can be narrowed down further by determining the melting point of the B Schiff addition product.

A compound's melting point is helpful in two ways: it provides information on the composition's identity and degree of purity. Impurities will affect a compound's melting point, resulting in broader and lower melting point ranges.

First, the solubility test must be performed in order to remove soluble contaminants from the target molecule. The desired chemical and the soluble impurities are dissolved in a minimum of near or boiling solvent once a suitable solvent has been selected. The solution is then given time to gradually cool.

Learn more about Schiff addition product refer

https://brainly.com/question/14748028

#SPJ4

The average speed of the runner in miles per hour would be 8.18 miles per hour.

The average speed of a moving object is the ratio of the total distance traveled by the object and the total time taken to cover the distance. Mathematically, this can be expressed as;

Average speed = total distance traveled/ total time taken

In this case;

Total distance = 10 km

Total time = 45 minutes, 35 seconds

In order to find the average speed in miles per hour, let's convert the distance from km to mile and the time to hour.

1 km = 0.621371 mile

10 km = 10 x 0.621371

          = 6.21371 miles

1 hour = 3600 seconds

60 seconds = 1 minute

45 minutes = 45 x 60

                    = 2700 seconds

Total time = 2700 + 35

                 = 2735 seconds

3600 seconds = 1 hr

2735 seconds =  2735/3600

                         = 0.7597 hour

The average speed of the runner in miles per hour:

6.21371/0.7597 = 8.18 miles per hour

More on average speed can be found here: https://brainly.com/question/12322912

#SPJ1

Answer:

a

Explanation:

hope this helps for now

The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [  H₂O ] / [ Cr₂O₇²⁻ ]²  [ H⁺]².

For a chemical reaction, the equilibrium constant can be defined as the ratio of reactant to product that is used to determine chemical behavior. At equilibrium, the forward reaction rate equals the backward reaction rate.

Equilibrium constants vary with temperature and are unaffected by reaction quantities, catalysts, or inert materials. Furthermore, it is unaffected by reactant concentrations, pressures, or volumes. In general, the temperature dependence of the equilibrium constant is determined by H of the reaction.

Thus, The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [  H₂O ] / [ Cr₂O₇²⁻ ]²  [ H⁺]².

To learn more about an equilibrium constant, follow the link;

https://brainly.com/question/10038290

#SPJ1

Oxygen isotope analyses of both deep-sea cores and ice cores (from the Greenland ice sheet) indicate that the Pleistocene was characterized by frequent and widespread climate variability.

This included cycles of glacial advance and retreat.

These changes were caused by variations in the Earth's orbit and tilt, affecting the amount of solar radiation received by different parts of the Earth.

The Pleistocene also saw a series of major ice ages, during which ice sheets and glaciers covered most of the Earth's surface. These ice ages were interspersed with shorter, warmer periods called interglacials. During that time, the Earth's climate resembled the present climate.

Read more about Pleistocene at:

brainly.com/question/28102167

#SPJ4

The maximum number of moles of Fe could be produced is 0.1 option - A is correct.

The grams to moles formula must be used in order to accurately calculate the number of moles, n, of a substance with a given mass, m, (in grams): M is the material's molar mass, so n = m / M.

According to the periodic table, the molecular mass of iron, to three decimal places, is 55.845 and its elemental symbol is Fe.

Moles = mass/molar mass

Molar mass of Fe = 56

Number of moles of Fe = 8/56

Number of moles of Fe = 0.14moles.

To know more about moles visit:

https://brainly.com/question/2001450

#SPJ1

the unknown salt AS X H₂O was analyzed and found to contain 16.4 percent water. If the anhydrous salt has a formula mass of 183 amu then the water of crystallization (X) for the hydrate is 7.

Those compound from which all the water molecules are removed is termed as anhydrous salt. These types of compounds can be used as desiccants (drying agents) that means they can absorb water from their surrounding.

In a crystalline state of a salt the no. of molecules of water are present in a definite molecular proportion is known as Water of crystallization.

Example : CaSO4.5H2O consist of 5 Water of crystallization.

To know more about  anhydrous salt  visit

https://brainly.com/question/14953867

#SPJ1

Analyses revealed that 16.4% of the unidentified salt AS X H2O contained water. The hydrate's water of crystallisation (X) is 7 if the anhydrous salt's formula mass is 183 amu.

What is sodium anhydrous?

Anhydrous salts are substances from which all of the water molecules have been eliminated. These kinds of substances can serve as desiccants, or drying agents, by absorbing water from their surroundings.

Water of crystallisation is the term used to describe the quantity of water molecules present in a specific molecular proportion in a salt that has crystallised.

Example: The water of crystallization for CaSO4.5H2O is 5.

To learn more about anhydrous salt.

brainly.com/question/14953867

#SPJ1

Both Saturday's earthquake and the one in 2010 are thought to have been caused by the Enriquillo-Plantain Garden fault system, according to the United States.

The Enriquillo-Plantain Garden fault zone (EPGFZ or EPGZ) is indeed a network of active coaxial left lateral-moving strike - slip faults faults that extends along the southern coast of Hispaniola, the island that is home to Haiti and the Dominican Republic.

As one of Haiti's main plate-bounding fault systems, the Enriquillo-Plantain Garden fault zone is very well known. Initially believed to be the cause of the Mw 7.0 earthquake that struck Port-au-Prince on January 12, 2010, the strike-slip fault is located close to the city.

To know more about Enriquillo-Plantain visit:

https://brainly.com/question/15960054

#SPJ1

According to scientific notation, the answer of the operation is 7.04×10⁵.

Scientific notation is defined as a way of expressing numbers which are too large or too small so that they can be easily written in decimal form. It can be referred to the scientific form or the scientific index form or even the standard form.

Base ten notation is used by scientists, engineers as it helps in simplification of arithmetic operations. It contains the significant figures which include all non-zero numbers , the zeroes between significant digits and zeroes which are needed to be significant.

In scientific notation, the base should always be ten. The exponent should be a non-zero integer and it can be either positive or negative.In this case answer is obtained as 6.50×10⁵ +0.540×10⁵=7.04×10⁵.

Thus, the answer in scientific notation is 7.04×10⁵.

Learn more about scientific notation,here:

https://brainly.com/question/18073768

#SPJ1

In order of decreasing boiling point, CH3OH > H2S > C2H6 > Ar. The strongest types of bonding are ionic, covalent, hydrogen, and van der waals forces, in that order.

London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonds are different intermolecular forces. All substances have LDF, but molecules can have combination of these three types of intermolecular interactions.

The dipole-dipole forces increase with increasing polarity. Dipole-dipole forces are in an unique (stronger) case in this situation. It is possible for it to exist between a molecule with an N, O, or F atom that has a hydrogen atom bonded to it directly and another molecule with an N, O, or F atom that has a lone pair of electrons.

Learn more about ionic bond here:

https://brainly.com/question/11527546

#SPJ4

Diagram A is a divergent plate boundary, B is a convergent plate boundary and C is a transform plate boundary.

Plate tectonics are boundaries between two or more plates moving towards each other, away from each other or past each other.  When these occur they are known as either convergent, divergent or transform plate boundaries.

A convergent plate boundary, the tectonic plate converge by subduction, where the thin ocean crust slides beneath thick crust. It is divergent when the linear features are moving away from each other. For transform plate, the broad zone slides northwestward past the north plate.

The full question is:

Label each diagram (A, B, and C) as either convergent plate boundary, divergent plate boundary, or transform plate boundary. three plate boundaries

Learn more on tectonic boundaries here: https://brainly.com/question/838446

#SPJ1

Sodium reacts faster, producing enough heat to melt itself and occasionally ignite the hydrogen gas, resulting in the characteristic yellow-orange flame of sodium. The potassium reacts violently, bursting into a flame with the typical violet color of potassium.

Potassium has the chemical symbol K and the atomic number 19. Potassium is a silvery-white metal that can be cut with a knife with little effort. In seconds, potassium metal reacts with atmospheric oxygen to form flaky white potassium peroxide.

Sodium and potassium, for example, react violently with cold water. These are exothermic reactions. The reaction is so violent and exothermic that the hydrogen produced instantly catches fire.

Thus,  The potassium reacts violently, bursting into a flame with the typical violet color of potassium.

To learn more about potassium, follow the link;

https://brainly.com/question/13321031

#SPJ1

Answer:

1. or A. : .209%

B. : 1000.0 x .20

Explanation:

The amount of energy required to heat 100 g of water is 268000 J.

Energy is the ability or the capacity to perform work.

To calculate the amount heat energy required to change the water to steam, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the amount of energy required is 268000 J.

Learn more about energy here: https://brainly.com/question/19666326

#SPJ1

Exothermic reactions are

1) 2H2+O2 ⇒2H20+Heat

2) 2C2H2+5O2⇒4CO2+2H20+Heat

Endothermic reactions are

3) CH4+Heat ⇒CO+2H2

4) 2CO2+Heat⇒2CO+O2

What are exothermic and endothermic reactions?

Exothermic reactions are those reactions in which energy is released and in endothermic reactions energy is required to proceed the reaction.

1) & 2) are exothermic because energy is released in reaction 3) & 4) are endothermic because energy is required so called endothermic reaction.

For more information about exothermic & endothermic please visit:

https://brainly.com/question/2782285

#SPJ4

Among the given amino acids, serine, aspartate and histidine can create protein salt bridges.

Two non-covalent interactions—hydrogen bonding and ionic bonding—combine to form a salt bridge. One of the most significant noncovalent forces in chemistry and in biological systems is ion pairing. In a normal acid-base neutralization process, amino acids interact with one another to create salt. Simple attraction between the positive and negative charges and the shift of the -H (positive ion) from the acid to the amine constitute the reaction.

Amino acids that take part in bridge formation are- The anionic carboxylate (RCOO) of either aspartate or glutamate and the cationic ammonium (RNH3+) from lysine or the guanidinium (RNHC(NH2)2+) of arginine most frequently form the salt bridge. Although these are the most frequent, depending on external variables, additional residues with ionizable side chains like histidine, tyrosine, and serine can also take part in salt bridge formation.

Know about amino acids at:

https://brainly.com/question/13151127

#SPJ1

Serine, aspartate, and histidine can build protein salt bridges among the other amino acids mentioned.

How do amino acids contribute to the creation of salt bridges?

A salt bridge is created when two non-covalent interactions—hydrogen bonding and ionic bonding—combine. Ion pairing is one of the most important noncovalent forces in chemistry and in biological systems. Amino acids interact with one another to produce salt during a typical acid-base neutralization process. The reaction is simply the shifting of the -H (positive ion) from the acid to the amine and the attraction of the positive and negative charges.

The anionic carboxylate (RCOO) of either aspartate or glutamate, the cationic ammonium (RNH3+) from lysine, or the guanidinium (RNHC(NH2)2+) from arginine, are the amino acids that participate in bridge building. Although these are the most frequent, salt bridge creation can also involve other residues with ionizable side chains such histidine, tyrosine, and serine depending on the environmental factors.

To learn more about amino acids:

brainly.com/question/13151127

#SPJ1

Answer:

the answer is D.

Answer: 1.67 atm

Explanation:

Since the molar amounts are equal, this means that the partial pressure of acetylene is 1/3 of the total chamber pressure.

Answer:

the new volume of the balloon after 0.50 mol of CO2 is added is 67 L.

Explanation:

To solve this problem, we need to use the ideal gas law, which states that the pressure of a gas is directly proportional to its temperature and number of moles, and inversely proportional to its volume. This relationship can be written as:

PV = nRT

Where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas.

In this problem, the pressure, temperature, and number of moles of the gas all remain constant, so we can rearrange the ideal gas law to solve for the volume of the gas:

V = nRT/P

Plugging in the given values, we find that the volume of the gas is:

V = (0.50 mol CO2)(0.08206 Latm/molK)(298 K)/(1 atm)

V = 67 L

In contrast, the ratio and total quantity of stable atoms are defined by the half-life.Whatever the initial number of atoms, the percent of decrease is constant.They can determine the quantity of original carbon-14 by using the carbon-14 half-life of 5,730 years and the ratio of carbon-12 to carbon-14.

Since approximately half of the nuclei of each atom decay with each half-life, the number of radioactive atoms falls as the number of half-lives grows.

A longer dose interval will result from a longer half-life, which is reliant on both clearance and volume of distribution. For example, a CYP1A2 or CYP2C19 substrate can cause a decrease in clearance.

To know more about atoms visit:

https://brainly.com/question/13654549

#SPJ4

Answer:

Mass - measured in kilogram or tell the amoout of matter in an object.

Volume - is the amout of space that's an object taken

The mass of the oxygen that is formed from the decomposition of the aluminium chlorate is 27.4 g.

We define a decomposition reaction as the kind of reaction that involves the break up of a substance so as to obtain the components of the substance.

The compound that is being broken up can be shown in the equation that we have below;

2Al(ClO₃)₃ → 2AlCl₃ + 9O₂

Thus

Number of moles of aluminum chlorate = mass/ molar mass

= 52 grams /277 g/mol

= 0.19 moles

If 2 moles of aluminum chlorate would form 9 moles of oxygen

0.19 moles of aluminum chlorate would form 0.19 moles * 9/2

= 0.855 moles

Mass of the oxygen = 0.855 moles * 32 g/mol

= 27.4 g

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Answer: repel

Explanation: it's not yet known why like charges repel each other, so

but there's your answer, yw.

Answer:

1.3

Explanation:

Answer:

1.11 grams CaCl₂

**I am aware that this is not one of the answer choices, but I pretty confident that this should be the correct answer according the the given values

Explanation:

To find the mass of CaCl₂ necessary, you need to

(1) convert the volume from mL to L (1,000 mL = 1 L)

(2) calculate the amount of moles (M = moles / L)

(3) convert moles to grams (using the molar mass)

It is important to arrange the conversions/ratios in a way that allows for the cancellation of units. The final answer should have 3 sig figs like the given values.

(Step 1)

  100. mL CaCl₂                  1 L
--------------------------  x  -------------------  =  0.100 L CaCl₂
                                      1,000 mL

(Step 2)

Molarity (M) = moles / volume (L)                 <----- Molarity ratio

0.100 M = moles / 0.100 L                            <----- Insert values

0.0100 = moles                                             <----- Multiply both sides by 0.100 L

(Step 3)

Molar Mass (CaCl₂): 111 g/mol

 0.0100 moles CaCl₂             111 grams
---------------------------------  x  ---------------------  =  1.11 grams CaCl₂
                                                  1 mole

Answer:

postsynaptic membrane

Explanation:

Hope it helps!