Answer: Your answer would be heat of combustion.
Explanation: When oxygen combines with another substance and gives off light and heat, this is called combustion.
Why was saline solution used when swishing to dislodge cheek cells to pick a sampling?
The Saline solution is used when swishing to dislodge cheek cells to pick a sampling because it is a sterile and gentle solution that helps to loosen and dislodge the cells from the inside of the cheek. It also helps to keep the cells moist and prevent them from drying out, which could affect the accuracy of the sampling.
The saline solution is non-toxic and safe to use in the mouth, making it an ideal choice for this purpose. Saline solution is used when swishing to dislodge cheek cells for sampling because it is a gentle and isotonic solution. This means it has a similar salt concentration as the cells and body fluids, preventing any damage to the cells during the process. The steps are as follows Prepare a saline solution, which is a mixture of salt and water. Swish the saline solution around in your mouth. The gentle swishing motion helps to dislodge cheek cells from the inner lining of your mouth. After swishing, spit the saline solution into a collection container. The cheek cells suspended in the saline solution can now be easily picked and examined for sampling purposes. Using a saline solution ensures that the cheek cells remain intact and viable for further analysis.
learn more about Saline here
https://brainly.com/question/8286469
#SPJ11
What is true of the amino acids that might have been delivered to earth within carbonaceous chondrites ?
It is true that amino acids have been found in carbonaceous chondrites, which are a type of meteorite that are rich in organic compounds.
These amino acids are believed to have formed through chemical reactions that occurred within the chondrites, and may have been delivered to Earth through impacts from these space rocks. This supports the idea that the building blocks of life may have originated from extraterrestrial sources.
Amino acids delivered to Earth within carbonaceous chondrites are considered significant because they are the building blocks of proteins, essential for life. These extraterrestrial amino acids might have played a crucial role in the origin of life on Earth by providing prebiotic organic material necessary for the development of living organisms.
To know more about Carbonaceous click here .
brainly.com/question/19148674
#SPJ11
for the reaction and at 276 k and 1 atm. this reaction is reactant favored under standard conditions at 276 k. the entropy change for the reaction of 1.93 moles of at this temperature would be
The Kelvin scale temperature. As a result, at 411 K, the reaction's entropy change equals the surroundings' entropy change.
What is a chemistry example of temperature?Temperature has an indicator of the mean kinetic energy in the system's atoms or molecules. Water particles in a cup in hot coffee contain a higher average velocity than water molecules in to cup of chilled tea, which means they move faster.
In chemistry, how is temperature measured?The Celsius or Kelvin scales are employed. Temperatures are measured in laboratories using Celsius thermometers. The previously Celsius measurements are changed to Kelvin for some calculations. That kelvin is the SI unit about temperature.
To know more about temperature visit :
https://brainly.com/question/31055263
#SPJ1
What is the formula for the ionic compound containing calcium ions and oxide ions?A) CaO B) Ca2O C) CaO2 D) Ca3O E) CaO3
The formula for the ionic compound containing calcium ions and oxide ions is A) CaO.
Calcium ions have a +2 charge (Ca²⁺) and oxide ions have a -2 charge (O²⁻). In an ionic compound, the charges must balance, so one Ca²⁺ ion pairs with one O²⁻ ion, resulting in the formula CaO. The formula for the ionic compound containing calcium ions and oxide ions is A) CaO.
Alkaline in nature, calcium oxide is a chemical substance. An oxygen atom and a calcium atom combine to make calcium oxide. Calcium oxide's chemical or molecular formula is represented by the letter CaO. One of the earliest chemical substances is calcium oxide, sometimes known as quicklime.
Calcium cation and oxide anion are both present in the calcium oxide molecule, CaO. Oxygen is in a -2 oxidation state, while calcium is in a +2 oxidation state. Ca2+O2 is the symbol for calcium oxide in its ionic state.
The heat disintegration of limestone, which contains calcium carbonate, produces the calcium oxide.
To know more about ionic compound click here:
https://brainly.com/question/3222171
#SPJ11
Question 2
Which one of the following is the major source of air pollution in the United States?
a. Electric power plants that burn coal or oil
b. Steel mills
c. Automotive vehicles
d. Home heating systems
The major source of air pollution in the United States is: c. Automotive vehicles. In the United States and around the world, there are several sources of air pollution. Some come from natural sources, while others are a result of human activity.
Automotive vehicles contribute significantly to air pollution due to their emissions of pollutants such as carbon monoxide, nitrogen oxides, and volatile organic compounds. While electric power plants, steel mills, and home heating systems also contribute to air pollution, automotive vehicles are considered the largest contributor in the United States. The most widely utilised kind of fuel cell in automotive applications is the polymer electrolyte membrane (PEM) fuel cell. A PEM fuel cell's positive electrode (cathode) and negative electrode (anode) are separated by an electrolyte membrane.
Learn more about pollution here:
/brainly.com/question/19561876
#SPJ11
Does your melting point obtained for your product indicate that your sample is indeed benzoin or hydrobenzoin? Cite additional evidence for your answer.
By examining both the melting point and the IR spectrum, we can determine whether the product is benzoin or hydro benzoin.
Based on the melting point obtained for the product, we can determine whether it is benzoin or hydro benzoin. The melting point of benzoin is around 134-137 °C, while the melting point of hydro benzoin is around 148-150 °C. If the melting point of the product falls within the range of benzoin, then it is likely to be benzoin. However, if the melting point falls within the range of hydro benzoin, then it is likely to be hydro benzoin.
In addition to the melting point, there are other pieces of evidence that can help determine whether the product is benzoin or hydro benzoin. For instance, the IR spectrum of benzoin will show peaks at around 1680 cm-1 and 1600 cm-1, which are indicative of the carbonyl group present in benzoin. On the other hand, the IR spectrum of hydro benzoin will show peaks at around 1670 cm-1 and 1570 cm-1, which are indicative of the carbonyl group and the hydroxyl group present in hydro benzoin.
Find out more about hydro benzoin.
brainly.com/question/28480025
#SPJ11
The conversion of a carboxylic acid into ANYTHING depends on what?
The conversion of a carboxylic acid into any other compound depends on factors such as the type of reaction, the reagent used, and the reaction conditions.
1. Type of reaction: Carboxylic acids can undergo various reactions such as esterification, reduction, and decarboxylation, each leading to different products.
2. Reagent used: The reagent plays a crucial role in determining the product. For example, using an alcohol in the presence of an acid catalyst will result in ester formation, while using LiAlH4 as a reducing agent will yield an alcohol.
3. Reaction conditions: Factors such as temperature, pressure, and solvent can influence the outcome of a reaction. Some reactions may require specific conditions to proceed or to favor the formation of a particular product.
In summary, the conversion of a carboxylic acid into any compound depends on the reaction type, reagent used, and reaction conditions.
More on carboxylic acid: https://brainly.com/question/29995020
#SPJ11
Question 46
By nature, unpolluted rainfall:
a. Is devoid of particulate matter
b. Has a pH of between 5.0 and 5.6
c. Is slightly alkaline
d. Falls only in high lakes areas
By nature, unpolluted rainfall has a pH of between 5.0 and 5.6. Thus, option (b) is the correct answer.
Unpolluted rain refers to natural rain that is unaffected by pollution in the air and water. Such rain is not devoid of particulate matter but has particulate matter such as soil particles present.
Unpolluted rain is also known as clean rain. This rain is slightly acidic in nature as the carbon dioxide and rainwater react together to form carbonic acid. Carbonic acid is a weak acid that is responsible for the slight acidity of rainwater.
[tex]H_20+CO_2--- > H_2CO_3[/tex]
If the pH falls down below 4.4, the rain is said to be acid rain.
Learn more about Acid rain:
https://brainly.com/question/27644323
#SPJ4
What was the advantage of using the solid resin instead of the traditional acid catalyst in the synthesis of butyl acetate?
The advantage of using solid resin instead of the traditional acid catalyst in the synthesis of butyl acetate is that the solid resin provides a more efficient, environmentally friendly, and reusable option.
This leads to a cleaner reaction process with fewer byproducts and easier catalyst recovery for reuse, thus improving the overall efficiency and sustainability of the synthesis.
The benefit of employing solid resin in the synthesis of butyl acetate rather than conventional acid catalyst is that it offers a more sustainable and environmentally friendly process. Solid resin catalysts are more selective, less wasteful, and reusable than conventional acid catalysts. Solid resin catalysts also make it simpler to separate and purify the product, increasing the yield of butyl acetate.
To know more about solid resin click here:
https://brainly.com/question/31261482
#SPJ11
20
Which of the following perfect squares has a square root of 4?
OA. 8
OB. 16
OC. 25
OD. 36
Finish
Pause
School Specialty, LLC No part of this document may be reproduced without the written permission of the publisher
if 30 ml of a stock solution of bacl2 can be mixed with water to prepare 150 ml of 0.3 mgml solution, what is the concentration of bacl2 in the stock solution in mgml? do not include units in your answer.
Answer:
310
Explanation:
Question 12
Of the following, which is not ordinarily used as a rodenticide?
a. ANTU
b. methoxychlor
c. sodium fluoracetate
d. warfarin
Of the four options listed, the one that is not ordinarily used as a rodenticide is methoxychlor. The correct answer is option b.
Methoxychlor is an insecticide that was widely used in the past to control a range of pests, including mosquitoes, flies, and other insects. However, it is not effective as a rodenticide and is not commonly used for this purpose.
The other three options listed are all commonly used as rodenticides. ANTU (alpha-naphthylthiourea) is a chemical compound that is toxic to rodents and is often used in bait formulations to control populations of rats and mice.
Sodium fluoracetate, also known as compound 1080, is a highly toxic substance that is commonly used as a rodenticide and is effective against a range of rodent species. Warfarin is another widely used rodenticide that works by disrupting the blood clotting process in rodents, ultimately causing fatal hemorrhaging.
Therefore, option b is correct.
For more such questions on rodenticide , click on:
https://brainly.com/question/18722197
#SPJ11
Ubiquanone can carry ___ electron(s) from ___ and delivers them ____Cytochrome C can carry ___ electron(s) from ___ and delivers them ___
Ubiquinone (also known as coenzyme Q) can carry two electrons from Complex I and Complex II of the electron transport chain (ETC) and delivers them to Complex III.
Cytochrome C can carry one electron from Complex III and delivers it to Complex IV of the ETC.
The electron transport chain (ETC) is a series of protein complexes located in the inner mitochondrial membrane that transfer electrons from electron donors to electron acceptors, generating a proton gradient that is used to generate ATP. Two important components of the ETC are ubiquinone and cytochrome C.
Ubiquinone (Q) can carry two electrons from Complex I (NADH dehydrogenase) and Complex II (succinate dehydrogenase) of the ETC and delivers them to Complex III (cytochrome bc1 complex).
Ubiquinone is lipid-soluble and mobile within the inner mitochondrial membrane, shuttling electrons from Complex I and Complex II to Complex III. As electrons are transferred through the complexes, protons are pumped out of the mitochondrial matrix, generating a proton gradient that is used to drive ATP synthesis.
Cytochrome C is a small, soluble protein that can carry one electron from Complex III to Complex IV (cytochrome c oxidase). The transfer of electrons from cytochrome C to Complex IV generates additional proton pumping, further contributing to the proton gradient that drives ATP synthesis.
In summary, ubiquinone carries two electrons from Complex I and II and delivers them to Complex III, while cytochrome C carries one electron from Complex III and delivers it to Complex IV. These transfers of electrons are important for generating the proton gradient that drives ATP synthesis in the electron transport chain.
For more question on Ubiquinone click on
https://brainly.com/question/31329137
#SPJ11
an aqueous magnesium chloride solution is made by dissolving 6.21 6.21 moles of mgcl2 mgcl 2 in sufficient water so that the final volume of the solution is 4.20 l 4.20 l . calculate the molarity of the mgcl2 mgcl 2 solution.
The molarity of the Magnesium chloride solution is 1.48 M.
What is the molarity of a 2.5 g Magnesium chloride in 125 ml water solution?We take the formula weight of Magnesium chloride, 58.5 g, and multiply it by 2.5 g Magnesium chloride by the conversion factor of 1 mole Magnesium chloride. We now know that we have 0.0427 moles of sodium chloride. We can determine the molarity now that we know the moles. We get 0.34 M Magnesium chloride by dividing the moles of solute (0.0427) by the volume of the solution (0.125 L).
The formula for calculating molarity is: moles of solute/volume of solution (in liters)
We are given that:
moles of Magnesium chloride = 6.21 moles
volume of solution = 4.20 L
The formula produces the following outcomes when these values are added:
Molarity = 6.21 moles / 4.20 L
Molarity = 1.48 M
To know more about molarity visit:-
https://brainly.com/question/8732513
#SPJ1
you are comparing two coordination complexes that have the same molecular shape and central metal cation. complex a has only chloride ligands and complex b had only co ligands. which statements are true regarding the complexes? select all that apply. g
1. Complex A will have a lower coordination number than Complex B. 2. Complex B will have a higher electron density around the central metal cation than Complex A. 3. Complex A will have a higher dipole moment than Complex B. 4. Complex B will have a higher ligand field strength than Complex A.
Based on your question and the terms provided, the following statements are true regarding the coordination complexes A and B:
1. Complex A will have higher ionic character due to the presence of chloride ligands, while complex B will have a more covalent character due to the presence of CO ligands.
2. Complex A will likely have a higher crystal field splitting energy (Δ) because chloride ligands are weak field ligands, while CO ligands are strong field ligands in complex B.
3. The color of the two complexes may differ due to different ligands affecting the d-orbital electron transitions.
4. The stability of complex B is generally higher than complex A because CO ligands form stronger bonds with the central metal cation compared to chloride ligands.
To learn more about metal cation click here
brainly.com/question/8098159
#SPJ11
Write a poem
at least five lines long to describe
the organization of matter by the arrangement
of its atoms.
Answer:
Atoms dance in a cosmic ballet,
Each one with a role to play,
They join together in a grand display,
Creating molecules in an endless array,
Organizing matter in a beautiful way.
The formula for sodium sulfide isA) NaS. B) K2S. C) NaS2. D) Na2S. E) SeS.
The chemical formula for sodium sulfide is NaS.
Generally a chemical formula is defined as an expression which shows the elements in a compound and its relative proportions of those elements. If only one atom of a specific type is present in the chemical formula, no subscript is used. And, for atoms that have two or more of a specific type of atom present, a subscript is written after the symbol for that atom.
Na is the symbol for sodium and S is the symbol for sulfide and the both the elements have valency 1. Hence, the symbol for sodium sulfide is NaS.
Learn more about chemical formula from the link given below.
https://brainly.com/question/29031056
#SPJ4
Emergency oxygen supplies aboard aircraft often are generated by the decomposition of sodium chlorate (NaClO3). NaClO3(s) + NaCl(s) + O2(g) Determine the percent yield if the decomposition of 75.0 g sodium chlorate generates 29.45 g of oxygen. (Hint: Check if the chemical reaction is balanced)
The chemical reaction is not balanced and must be balanced before the percent yield can be calculated. The balanced equation is: 25.2%
What is chemical reaction?A chemical reaction is a process in which substances interact with each other to form new substances with different properties. During a chemical reaction, atoms break apart from their original molecules and form new molecules by forming new bonds with other atoms. These new molecules have different properties from the original molecules, and the process of forming them is known as a chemical reaction.
2 NaClO₃(s) → 2 NaCl(s) + 3 O₂(g)
Theoretical yield of oxygen = 75.0 g NaClO₃ x (3 moles O₂/2 moles NaClO₃) x (32 g O₂/1 mole O₂) = 117.0 g O₂
Actual yield of oxygen = 29.45 g O₂
Therefore, percent yield = (Actual yield/Theoretical yield) x 100 = 25.2%
To learn more about chemical reaction
https://brainly.com/question/25769000
#SPJ4
What is the limitation of using Ultraviolet (UV) rays for disinfection water conveyed in distribution system?
a) Lack of measureable chlorine residual
b) Lack of reliable technology
c) Long start-up time for equipment
d) Microorganisms become immune to disinfectants
While UV treatment is a useful and effective method of disinfection, it should be used in combination with other disinfection methods to ensure that water remains safe and clean throughout the distribution system.
The limitation of using ultraviolet (UV) rays for disinfecting water conveyed in distribution systems is that it does not provide a residual disinfectant to maintain water quality during storage and distribution. UV disinfection is effective in killing a wide range of microorganisms, including viruses, bacteria, and protozoa. However, once the water leaves the UV treatment plant, there is no residual disinfectant to prevent recontamination of the water during storage and distribution.
This limitation is significant because it means that other disinfection methods must be used in combination with UV treatment to provide a residual disinfectant. For example, chlorine may be added to the water after UV treatment to provide a residual disinfectant that can help prevent recontamination in the distribution system. The lack of a measurable chlorine residual is not a limitation of UV treatment, but rather a limitation of relying solely on UV treatment for disinfection.
For such more questions on UV treatment:
https://brainly.com/question/19154311
#SPJ11
A mole is a unit of measure, describing the amount of a chemical substance that contains as many atoms, ions, or molecules as there are in exactly 12 grams of pure Nickel. True False
The given statement "A mole is a unit of measure, describing the amount of a chemical substance that contains as many atoms, ions, or molecules as there are in exactly 12 grams of pure Nickel" is True because a mole is defined as the amount of a chemical substance that contains as many elementary entities as there are in exactly 12 grams of pure Carbon-12.
However, this definition was revised in 2019 by the International System of Units (SI) to define a mole as the amount of a substance that contains exactly 6.02214076 x 10²³ elementary entities. This number is known as Avogadro's number and is used as a conversion factor to convert between the number of moles and the number of elementary entities.
The use of moles is important in chemistry because it allows chemists to accurately measure and quantify chemical reactions. For example, if you have a chemical equation that tells you the number of moles of reactants and products involved in a reaction, you can use that information to determine how much of each substance is needed to make a certain amount of the product or to predict the yield of the reaction.
Moles also allow chemists to compare different substances on a more equal footing since they take into account the number of atoms or molecules in each substance, rather than just their mass or volume.
You can learn more about moles at: brainly.com/question/26416088
#SPJ11
Question 17
Which one of the following is most hazardous to human health?
a. Asbestos
b. Sulfur dioxide
c. Ozone
d. Nitrogen oxide
The most hazardous to human health out of these options would be asbestos. It is a known carcinogen and can cause lung cancer and other respiratory diseases. Sulfur dioxide, ozone, and nitrogen oxide can also be harmful, but generally in high concentrations or prolonged exposure.
The most hazardous to human health among the options provided is asbestos, and it's exposure can lead to severe lung diseases, such as asbestosis, lung cancer, and mesothelioma.
To know more about health hazards, click here:-
https://brainly.com/question/31039905
#SPJ11
Calculate the average atomic mass of lithium using the following data:Isotope Abundance Mass6Li 7.5 % 6.0151 amu7Li 92.5% 7.0160 aumA) 6.51 amu B) 6.02 amu C) 6.94 amu D) 7.02 amu E) 6.50 amu
The average atomic mass of lithium using the following data: Isotope Abundance Mass6Li 7.5 % 6.0151 amu7Li 92.5% 7.0160 aum is C) 6.94 amu is correct option.
The average atomic mass of an element is calculated by taking the weighted average of the masses of its isotopes, with the abundance (percentage) of each isotope taken into account as the weight.
Given the following data for lithium isotopes:
Isotope Abundance Mass (amu)
6Li 7.5% 6.0151 amu
7Li 92.5% 7.0160 amu
We can calculate the average atomic mass of lithium as follows:
Average Atomic Mass = (Abundance of 6Li ×Mass of 6Li) + (Abundance of 7Li × Mass of 7Li)
Average Atomic Mass = (0.075 × 6.0151 amu) + (0.925 × 7.0160 amu)
Average Atomic Mass = 0.45113575 amu + 6.4904 amu
Average Atomic Mass = 6.94153575 amu
Rounded to two decimal places, the average atomic mass of lithium is approximately 6.94 amu.
Therefore, the correct answer is option C) 6.94 amu.
To know more about average atomic mass
https://brainly.com/question/28524070
#SPJ4
How did Dalton explain the formation of compounds?
A) Atoms divide into smaller parts.
B) Atoms chemically combine.
C) Mixtures of atoms are formed.
D) Copies of atoms are made
Dalton explained the formation of compounds by Atoms chemically combine. Option B is correct.
According to the Dalton's atomic theory, atoms are indivisible and they will combine in fixed ratios to form a compounds. He proposed that elements will consist of tiny, indivisible particles termed as atoms that will combine in simple, whole-number ratios to form a compounds.
He believed that atoms of different elements combine in the fixed ratios to form compounds, and that the ratio of their masses determines the ratio of their combining atoms.
Thus, Dalton explained that the formation of the compounds can occurs through a chemical combination of atoms, rather than through the division or copying of atoms.
Hence, B. is the correct option.
To know more about Dalton's atomic theory here
https://brainly.com/question/11855975
#SPJ4
given the reaction 2hgo(s) → 2hg(l) o2(g), what weight of elemental mercury will be obtained by the decomposition of 94.5 g of hgo?
87.457 g of elemental mercury will be obtained from the decomposition of 94.5 g of HgO.
To calculate the weight of elemental mercury obtained from the decomposition of 94.5 g of HgO, you'll need to use stoichiometry and the balanced equation: 2HgO(s) → 2Hg(l) + O2(g).
First, determine the molar mass of HgO (mercuric oxide): Hg (200.59 g/mol) + O (16.00 g/mol) = 216.59 g/mol.
Next, convert the given mass of HgO (94.5 g) to moles:
94.5 g HgO × (1 mol HgO / 216.59 g HgO) = 0.436 moles HgO.
Now, use the stoichiometry from the balanced equation to convert moles of HgO to moles of Hg:
0.436 moles HgO × (2 moles Hg / 2 moles HgO) = 0.436 moles Hg.
Finally, convert moles of Hg to mass:
0.436 moles Hg × (200.59 g Hg / 1 mol Hg) = 87.457 g Hg.
Thus, 87.457 g of elemental mercury will be obtained from the decomposition of 94.5 g of HgO.
Visit here to learn more about moles : https://brainly.com/question/26416088
#SPJ11
To find the weight of elemental mercury obtained by the decomposition of 94.5 g of HgO, you can follow these steps:
Step 1: Determine the balanced chemical equation.
The balanced equation is already given: 2HgO(s) → 2Hg(l) + O2(g).
Step 2: Calculate the molar mass of HgO and Hg.
Molar mass of HgO = (1 x Hg) + (1 x O) = (1 x 200.59) + (1 x 16.00) = 216.59 g/mol
Molar mass of Hg = 200.59 g/mol
Step 3: Determine the moles of HgO in the given mass.
Moles of HgO = mass of HgO / molar mass of HgO = 94.5 g / 216.59 g/mol = 0.436 moles
Step 4: Use the stoichiometry of the balanced equation to determine the moles of Hg produced.
From the equation, 2 moles of HgO produce 2 moles of Hg, so the mole ratio is 1:1. Therefore, 0.436 moles of HgO will produce 0.436 moles of Hg.
Step 5: Convert moles of Hg to mass.
Mass of Hg = moles of Hg x molar mass of Hg = 0.436 moles x 200.59 g/mol = 87.457 g
So, the weight of elemental mercury obtained by the decomposition of 94.5 g of HgO is approximately 87.457 g.
To know more about weight of elemental mercury :
https://brainly.com/question/31544370
#SPJ11
How do you change the aldol condensation to form a benzalacetophenone?
To change the aldol condensation product to form benzalacetophenone, you will need to perform a dehydration reaction.
This can be achieved by treating the aldol product with a strong acid, such as sulfuric acid or phosphoric acid, under reflux conditions. The acid will protonate the hydroxyl group, making it a better leaving group, and facilitating the elimination of water. The resulting product will be the desired benzalacetophenone. It is important to note that this reaction requires careful control of the reaction conditions, such as temperature and concentration of the acid, to ensure a high yield and purity of the final product.
The general reaction scheme for the conversion of an aldol condensation product to benzalacetophenone is shown below:
CH3C(O)CHO + C6H5CHO → CH3C(O)CH=C(C6H5)C(O)CH3 + H2O
In this reaction, the aldol product formed from the condensation of acetone and benzaldehyde is subjected to mild acidic or basic conditions, such as with the use of a catalytic amount of acid or base, and heated to promote dehydration. The resulting product is benzalacetophenone, an α,β-unsaturated ketone.
To know more about aldol condensation, please click on:
https://brainly.com/question/9415260
#SPJ11
An electron cloud:
contains protons and electrons.
contains only valence electrons.
has several energy levels.
None of the choices are correct.
In an electron cloud, which is made up of electrons orbiting an atom's nucleus, there are as many as seven different energy levels.
The region closest to an atom's nucleus where electrons are most likely to be located is referred to as an electron cloud. The sphere that envelops the microscopic nucleus is indeed there, despite the fact that two-dimensional images frequently show it as a ring.
In the electron cloud model, a finite number of electrons can be stored in each energy level. The lowest energy level, which is given the number one, is the smallest and most near the nucleus. Seven different energy levels may exist.
To learn more about electron cloud, click:
https://brainly.com/question/28930500
#SPJ1
Question 9
What water constituent has been associated with staining plumbing and clothing dark brown or black?
a. Zn
b. Mn
c. Ag
d. Ca
The correct answer about water constituent associated with staining plumbing and clothing dark brown or black is b. Mn
Mn is the chemical symbol for element Manganese. The water contains numerous elements. Some of them are important for body while others are toxic. The different chemical properties of each element results in varying effects.
The black or dark brown colour of the manganese comes from its oxidation and deposition. Manganese is an important element playing significant role in the body's growth and development. However, it is required in trace elements and optimum level must not be exceeded in the body.
Learn more about manganese - https://brainly.com/question/29743410
#SPJ4
Question 38 Marks: 1 Hardness in drinking water is desirable at levels ofChoose one answer. a. 80 to 150 mg/l b. 50 to 80 mg/l c. 0 to 50 mg/l d. 600 to 800 mg/l
The correct answer is (b) 50 to 80 mg/l. Hardness in drinking water refers to the presence of minerals such as calcium and magnesium. While these minerals are essential for human health, they can also cause scaling in pipes and appliances, leading to increased maintenance costs. Hardness levels in drinking water are typically measured in terms of milligrams per liter (mg/l).
The optimal level of hardness in drinking water is considered to be in the range of 50 to 80 mg/l. This range is considered desirable as it provides adequate levels of essential minerals without causing significant scaling issues.
In contrast, water with a hardness level of 600 to 800 mg/l would be considered very hard and can lead to significant scaling in pipes and appliances. Similarly, water with hardness levels of 0 to 50 mg/l is considered too soft, and may not contain adequate levels of essential minerals for human health.
Therefore, it is important to regularly test the hardness levels in drinking water to ensure that it falls within the desirable range. This can be done through water testing kits or by contacting a professional water testing service.
learn more about minerals here: brainly.com/question/26705337
#SPJ11
The correct answer is (b) 50 to 80 mg/l. Hardness in drinking water refers to the presence of minerals such as calcium and magnesium. While these minerals are essential for human health, they can also cause scaling in pipes and appliances, leading to increased maintenance costs. Hardness levels in drinking water are typically measured in terms of milligrams per liter (mg/l).
The optimal level of hardness in drinking water is considered to be in the range of 50 to 80 mg/l. This range is considered desirable as it provides adequate levels of essential minerals without causing significant scaling issues.
In contrast, water with a hardness level of 600 to 800 mg/l would be considered very hard and can lead to significant scaling in pipes and appliances. Similarly, water with hardness levels of 0 to 50 mg/l is considered too soft, and may not contain adequate levels of essential minerals for human health.
Therefore, it is important to regularly test the hardness levels in drinking water to ensure that it falls within the desirable range. This can be done through water testing kits or by contacting a professional water testing service.
learn more about minerals here: brainly.com/question/26705337
#SPJ11
How do we turn thiamine hydrochloride into thiamine
We have to pass thiamine hydrochloride to a strong base and then an alcoholic mixture to make thiamine
First, we pass thiamine hydrochloride to a basic solution, that could be NaOH here, then an alcoholic solution passed on to the product solution of the base will convert the thiamine hydrochloride into the thiamine (this chemical is vitamin B12).
In this procedure, the hydrochloride salt is deprotonated to produce the thiamine free base, which can then be extracted and purified using an appropriate technique such chromatography, precipitation, or filtering. This process can be reversed also to convert thiamine hydrochloride to thiamine.
To know more about Thiamine hydrochloride, visit,
https://brainly.com/question/15218938
#SPJ4
Because acid-base reactions are highly exothermic, which should you NOT mix together?
It is important to avoid mixing strong acids with strong bases as they can react violently and release a large amount of heat.
It is important to avoid mixing strong acids with strong bases as they can react violently and release a large amount of heat. This type of reaction is highly exothermic and can cause an explosion or fire, especially if large quantities of acid and base are involved. It is also important to be careful when mixing acids and bases of any strength, as they can produce harmful fumes or spatter.
Therefore, it is recommended to always follow safe laboratory practices and consult with a qualified expert before conducting any chemical reactions.
Visit to know more about Strong acid:-
brainly.com/question/24586675
#SPJ11