H(t) = [tex]\left \{ {{0 if t < 0} \atop {1 if t \geq 0}} \right.[/tex]
As t→0 from the left, H(t) approaches 0, as t→0 from right H(t) approaches 1.
From Laplace transformation definition:
L{f(t)} = [tex]\int\limits^\alpha _0 {e^{-st} f(t)} \, dt[/tex]
Given, H(t) = [tex]\left \{ {{0 if t < 0} \atop {1 if t \geq 0}} \right.[/tex]
Then
L{H(t)} = [tex]\int\limits^1_0 {e^{-st} H(t) } \, dt+\int\limits^\alpha _1 {e^{-st} H(t) } \, dt[/tex]
[tex]=\int\limits^1_0 {e^{-st} (0) } \, dt+\int\limits^\alpha _1 {e^{-st} (1) } \, dt[/tex]
[tex]=[\frac{e^{-st} }{-s} ]^{\alpha }_{1}[/tex]
[tex]=\frac{e^{-st} }{s}[/tex]
L{H(t)} =[tex]\frac{e^{-st} }{s}[/tex]
As t→0 from the left, H(t) approaches 0, as t→0 from right H(t) approaches 1.
For such more questions about Heaviside function
https://brainly.com/question/13189084
#SPJ4
Determine how many times the innermost loop will be iterated when the algorithm segment is implemented and run. (Assume that m and n are positive integers.)
for j := 1 to m
for k := 1 to n
[Statements in body of inner loop.
None contain branching statements that
lead outside the loop.]
next k
next j
Discrete mathematics
The inner loop iterates 'n' times, outer loop iterates 'm' times and total loop iterates (m×n) times.
Given program,
for j = 1 to m
k = 1 to n
statement in the body of innerloop. None contain branching statements that lead outside the loop.
next j
next k
Here, in the inner loop k iterates from 1 to n that is n times and j iterates from 1 to m that is m times.
Finally, the whole loop iterates m×n times because for every value of j from 1 to m, k value increases from 1 to n.
So, the inner loop iterates 'n' times, outer loop iterates 'm' times and total loop iterates (m×n) times.
To know more about Iterations refer to:
http://brainly.com/question/28134937
#SPJ4
A food company distributes its tomato soup in two cans of different sizes. For the larger can, both the diameter and the height have been increased by 10%.
By what percentage does the volume of the can increase from the smaller can to the larger can? Round your answer to the nearest percent.
Answer:
Step-by-step explanation:
If the diameter increases by 10%,
new diameter = d+⅒ = 1.1d
also new radius = 0.55r
Height also increasesby 10%,
New height = h+⅒h = 1.1h
hence diameter of larger can =
π*(0.55)²*1.1= 1.0453
hence percentage change in volume
is 4.53% which can be rounded off to
a box contains ten sealed envelopes numbered 1, . . . , 10. the first six contain no money, the next two each contains $5, and there is a $10 bill in each of the last two. a sample of size 3 is selected with replacement (so we have a random sample), and you get the largest amount in any of the envelopes selected. if x1, x2, and x3 denote the amounts in the selected envelopes, the statistic of interest is m
The probability distribution for the statistic is ; for m = 0 , P(0) = 0.216 , for m = 5 ,P(5) = 0.296 and for m = 10 , P(10) = 0.488 .
In the question ,
it is given that ,
the box has 10 sealed envelopes , that contains number from 1,2,...,10 .
the first six envelopes has no money .
next two envelopes has $5
and the last two contains $10 bill .
if x₁, x₂, and x₃ denote the amounts in the selected envelopes,
the statistic of interest is m = maximum of X₁ , X₂ and X₃ .
we need to find probability distribution for the statistic m,
So , P(m = 0) = P( all three envelope contains no money) = (6/10)³ = 0.216
and P(m = 5) = P( all from 8 envelope which contains at most $5) - P(all three envelope with 0 money)
= (8/10)³ - 0.216
= 0.296
and P(m = 10) = 1 - (8/10)³ = 0.488
Therefore , the required probability is P(0) = 0.216 , P(5) = 0.296 and P(10) = 0.488 .
The given question is incomplete , the complete question is
A box contains ten sealed envelopes numbered 1, . . . , 10. the first six contain no money, the next two each contains $5, and there is a $10 bill in each of the last two. a sample of size 3 is selected with replacement (so we have a random sample), and you get the largest amount in any of the envelopes selected. if x₁, x₂, and x₃ denote the amounts in the selected envelopes, the statistic of interest is M = the maximum of X₁ ; X₂ , and X₃ . Obtain the probability distribution of this statistic ?
Learn more about Probability here
https://brainly.com/question/11938528
#SPJ4
A piece of cardboard is 5 centimeters longer than it is tall. The area of the piece of cardboard is 66 square centimeters. How many centimeters long is the piece of cardboard?
Answer:
12.244 cm long
Step-by-step explanation:
The area of a rectangle is equal to its height times its width, so if the piece of cardboard has an area of 66 square centimeters and is 5 centimeters longer than it is tall, we can write the following equation to represent the dimensions of the piece of cardboard:
height * (height + 5) = 66
To solve this equation, we can first divide both sides of the equation by the height of the piece of cardboard to get:
height + 5 = 66 / height
We can then subtract 5 from both sides of the equation to get:
height = 66 / height - 5
We can then multiply both sides of the equation by the height to get:
height^2 = 66 - 5 * height
We can then use the quadratic formula to solve for the height of the piece of cardboard:
height = (-5 +/- sqrt(5^2 - 4 * 1 * -66)) / (2 * 1)
The value of the square root in the quadratic formula must be positive, so we take the positive value for the height:
height = (-5 + sqrt(5^2 + 4 * 1 * 66)) / (2 * 1)
This simplifies to:
height = (5 + sqrt(61)) / 2
The height of the piece of cardboard is approximately 7.244 centimeters. Since the piece of cardboard is 5 centimeters longer than it is tall, it must be 5 + 7.244 = 12.244 centimeters long.
Therefore, the piece of cardboard is approximately 12.244 centimeters long.
point(s) possible
K
Write the standard form of the equation and the general form of the equation of the circle of radius r and center (h,k).
Graph the circle.
r=√√3; (h,k) = (1,-5)
Write the equation for the circle in general form
The standard equation of a circle is [tex](x-1)^{2} + (y+5)^{2}= (\sqrt{3})^{2}[/tex]. The equation of the circle in general form is (x-1)² + (x-1)² = 3.
What is the standard equation of a circle?Standard form of circle equation is (x – a)² + (y – b)² = r²
What is the general form of the equation of a circle?General form of Equation of a Circle.
x² + y² + 2gx + 2fy + c = 0, for all values of g, f and c.
The equation of a circle is
(x-h)²+ (y-k)² = r²
So, it's given that radius,
r = √3
h=1 and k=-5
So, by substituting all values to the standard equation of a circle is :
[tex](x-1)^{2} + (y+5)^{2}= (\sqrt{3})^{2}[/tex]
The equation of the circle in the general form is written as :
(x-1)² + (x-1)² = 3
Learn more about general equations of a circle by: brainly.com/question/12401165
#SPJ1
Which is the equation of line b
The equation of line b that passes through the point (-3,2) is y=-1/4x+5/4
How do you find a line equation?to get the equation of a line given a point and its slope.
Recognize the slope.
Decide on the point.
In the point-slope form, y y 1 = m (x x 1), substitute the values. y − y 1 = m (x − x 1) .
Slope-intercept form should be used to write the equation.
What are the 3 different equations of lines?There are three major forms of linear equations: point-slope form, standard form, and slope-intercept form.
In the above question we see that,
The line b passes through the point (-3,2)
the equation of line should satisfy this point
In the given option the only line that satisfy the point is
option C
y=-1/4x+5/4
hence option C ,y=-1/4x+5/4 is the answer
To learn more about lines, click the following link:-
https://brainly.com/question/18831322
#SPJ1
a teacher figures that final grades in the statistics department are distributed as: a, 25%; b, 25%; c, 40%; d, 5%; f, 5%. at the end of a randomly selected semester, the following number of grades were recorded. find only the test statistics to test the claim that the grade distribution for the department is different than expected. be sure to set up the equation. do not conduct the hypothesis testing. grade a b c d f number 42 36 60 8 14
5.25 option c is the test statistics for the given data.
Given,
The observed values;-
A: 36
B: 42
C: 60
D: 14
E: 8
Total =160
To verify the following claim, a chi square test must be performed:
H0: The proportions for the final grades are the same.
H1: The final grade proportions varies from one another.
The level of significance assumed for this case is α = 0.01
The statistic to check the hypothesis is given by:
X² = ∑ⁿi = 1 (Oi - Ei)²/Ei
Now all that remains is to use the following formula to determine the predicted values, Ei = % × total
And the calculations are given by:
EA = 0.25 × 160 = 40
EB = 0.25 × 160 = 40
EC = 0.4 × 160 = 64
ED = 0.05 × 160 = 8
EF = 0.05 × 160 = 8
Here, the statistics;-
X² = (36 - 40)²/40 + (42 - 40)²/40 + (60 - 64)²/64 + (14 - 8)²/8 + (8 -8)²/8
= 16/40 + 4/40 + 16/64 + 36/8 + 0/8
= 5.25
Therefore,
The test statistics for the given data is option c 5.25
Learn more about test statistics here;
https://brainly.com/question/16768155
#SPJ4
A sampling distribution of the sample means of many large samples of a probability distribution is normally distributed. Which statement is true according to the Central Limit Theorem?
A the original PD can have any shape
B the original PD must also be normal
C the original PD must be uniform
D the original PD must be symmetric
The statement that is true according to the Central Limit Theorem is B. the original PD must also be normal.
Which is the Central Limit Theorem?According to the central limit theorem, if you take sufficiently large samples from a population, the means of the samples will be normally distributed even if the population is not normally distributed. The central limit theorem (CLT) states that as sample size increases, the distribution of sample means approaches a normal distribution, regardless of the distribution of the population.
The central limit theorem says that the sampling distribution of the mean will always be normally distributed, as long as the sample size is large enough.
In conclusion, the correct option is B.
Learn more about central limit on:
https://brainly.com/question/18403552
#SPJ1
Which of the following is true about the t-distribution? Assume a reference (random) sample of size 100 with sample mean 10 and sample standard deviation of 1 with unknown population mean and variance.
a. The t-distribution will look similar to the standard normal distribution as the sample size increases which results in the degrees of freedom increasing.
b. The t-distribution will look similar to the standard normal distribution as the sample size increases which results in the degrees of freedom decreasing.
c. The t-distribution will look similar to the normal distribution with mean 10 and standard deviation 1 as the sample size increases which results in the degrees of freedom decreasing.
d. The t-distribution will look similar to the normal distribution with mean 10 and standard deviation 1 as the sample size increases which results in the degrees of freedom increasing.
e. None of these
1000 times were added to the n=30 sample. Even with n=30, the sample variance distribution is still very biased.
What is probability ?Probability refers to possibility.
A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has incorporated probability to forecast the likelihood of various events.
The degree to which something is likely to happen is basically what probability means.
You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution.
Knowing the total number of outcomes is necessary before we can calculate the likelihood that a specific event will occur.
According to our question-
The sample variance's variance (SD) is still very large. The range is from 20 to 30%.
Because we are utilizing estimated population variance rather than the genuine population variance, which has some degree of uncertainty, the e t distribution has a longer tail when degrees of freedom are limited. Given that the estimated population variance is nearer to the actual population variance when sample size = 30, the t distribution will be closer to the z distribution.
learn more about probability click here:
brainly.com/question/13604758
#SPJ4
A greengrocer has sorted their apples into three
categories A weighs 12g, B weighs 16g and C
weighs 24g
A customer buys 1 apple A, 3 apples B and 1 apple
C
If A, B and C were to represent different isotopes of
apple what would be the relative abundance of
each type
We need to use the concept of Relative Abundance. Relative Abundance of A,B and C are 14.28,57.14 and 28.57% respectively.
What is Relative Abundance?The percentage of an organism of a specific sort in relation to the overall number of organisms in the area is known as relative abundance. Relative species abundances frequently follow particular patterns, some of the most well-known and extensively researched patterns in macroecology. Over a large variety of biological ecosystems, relative species abundances exhibit relatively similar patterns. Most species are rare (represented by a single individual in a community sample), while only a small number of species are prolific, according to a histogram of the number of species represented by 1, 2, 3,..., n individuals.
(M1)(x) + (M2)(1-x) = M(E) is the formula for Relative Abundance.
CalculationA weighs 12g, B weighs 16g and C weighs 24g.
A customer buys 1 apple A, 3 apples B and 1 apple
So assume A,B and C as different isotopes of apples.
Relative Abundance of A=12/84 ×100⇒14.28%
Relative Abundance of B=48/84 ×100⇒57.14%
Relative Abundance of C=24/84 ×100⇒28.57%
We need to use the concept of Relative Abundance. Relative Abundance of A,B and C are 14.28,57.14 and 28.57% respectively.
To refer more about Relative Abundance, visit:
https://brainly.com/question/28666991
#SPJ1
ASTU = AXYZ, #27 = 28°, m2U = (4x + y)²
#2X=130%, #2Y = (&r=6p)
The equations are -2-
and y
-[
Answer:
[tex]x=5, y=2[/tex]
Step-by-step explanation:
[tex]4x+y=22 \implies 24x+6y=132 \\ \\ 8x-6y=28 \\ \\ 32x=160 \\ \\ x=5 \\ \\ \implies 4(5)+y=22 \implies y=2[/tex]
Find the volume V of the solid obtained by rotating the region bounded by the given curves about the specified line. y = 27x^3, y = 0, x = 1; about x = 2
The volume V of the solid is obtained by rotating the region bounded by the given curves about the specified line. y = 27x^3, y = 0, x = 1; about x = 2 is 81π/5
Shell method:
The shell method is an integration for calculating the volume of a solid of revolution when integrating along an axis perpendicular to the axis of revolution. This is in contrast to disc integration which integrates along the axis parallel to the axis of revolution.
V=2π∫01(2-x). 27x³dx
= 2π.27([tex]x^{4}[/tex]/2 - [tex]x^{5}[/tex]/5)01
=54π(1/2-1/5)
= 81π/5
Therefore The volume V of the solid is obtained by rotating the region bounded by the given curves about the specified line. y = 27x^3, y = 0, x = 1; about x = 2 is 81π/5
Learn more about integration:
https://brainly.com/question/27419605
#SPJ4
The weight of a small car when rounded to the nearest 2 decimal place is 1.24 tons. Find the greatest and least possible weight of the car in 3 decimal place before it is rounded to the nearest hundred. Explain how u arrived at ur answer
Answer:
Below
Step-by-step explanation:
1.235 <= Weight < 1.245 before rounding
test for an association between handeness and career for these 5 professions. state the null and alternative hypothesis
Null Hypothesis: There is no association between handedness and career for Accountants. And Alternative Hypothesis: There is an association between handedness and career for Accountants.
Profession 1: Lawyer
Null Hypothesis: There is no association between handedness and career for Lawyers.
Alternative Hypothesis: There is an association between handedness and career for Lawyers.
Profession 2: Pilot
Null Hypothesis: There is no association between handedness and career for Pilots.
Alternative Hypothesis: There is an association between handedness and career for Pilots.
Profession 3: Accountant
Null Hypothesis: There is no association between handedness and career for Accountants.
Alternative Hypothesis: There is an association between handedness and career for Accountants.
Profession 4: Nurse
Null Hypothesis: There is no association between handedness and career for Nurses.
Alternative Hypothesis: There is an association between handedness and career for Nurses.
Profession 5: Teacher
Null Hypothesis: There is no association between handedness and career for Teachers.
Alternative Hypothesis: There is an association between handedness and career for Teachers.
Learn more about null hypothesis here
https://brainly.com/question/28920252
#SPJ4
What properties of equality do you need to use to solve the equation 2.1x−1.6=6.8? Solve the equation. Question content area bottom Part 1 What properties of equality do you need to use to solve the equation? Select all that apply. A. The Division Property of Equality B. The Multiplication Property of Equality C. The Subtraction Property of Equality D. The Addition Property of Equality Part 2 The solution is enter your response here. (Type the value of x.)
it is 6.1
Step-by-step explanation:
No matter what I've tried, nothing works. Hopefully you can help me
Answer:
see explanation
Step-by-step explanation:
given Δ ABD is isosceles with AB = AD then base angles are congruent, so
∠ ADB = ∠ ABD = 72°
then
∠ BAD = 180° - (72 + 72)° = 180° - 144° = 36° ( sum of angles in a triangle )
given Δ ABC is isosceles , then
∠ BCD = ∠ BAD = 36°
the exterior angle of a triangle is equal to the sum of the 2 opposite interior angles.
∠ ADB is an exterior angle of Δ BCD , then
∠ BCD + ∠ DBC = ∠ ADB
36° + ∠ DBC = 72° ( subtract 36° from both sides )
∠ DBC = 36°
So ∠ BCD = ∠ DBC = 36°
Thus the base angles of Δ BCD are congruent , then
Δ BCD is isosceles with BD = CD
Can someone please explain what formula to use when solving this problem ?
Answer:
Step-by-step explanation:
10 months=10/12=5/6 years.
Amount=Principal+ Interest
A=P+I
A=P+P×r×t
A=P(1+rt)
18500=P(1+4%×5/6)
18500=P(1+20/600)
18500=P(1+1/30)
18500=P(31/30)
P=18500×30/31≈17903.2258≈17903.23
(a) plot a scatter diagram. does it appear that a simple linear regression will be a suitable model?
On a scatter diagram, you can see outliers if there is a regression line. The point or points that are furthest distant from the regression line are considered outliers in a scatter diagram.
How is a scatter plot related to simple linear regression?In a scatter plot, dots are used to show the values of two separate numerical variables. To see how different variables relate to one another, utilize scatter plots. The link between an independent and dependent variable is shown as a straight line in a linear regression.
How do you know if a linear model is appropriate for a scatter plot?If a linear model is adequate, the residuals scatterplot should display random scatter and the histogram should appear about normal. The linear model is inappropriate if we see a curved connection in the residual plot. The residuals are displayed against the explanatory variable in a different form of residual plot.
To know more about linear regression visit:
https://brainly.com/question/29665935
#SPJ4
Compute Shannon's %NMC. Round your answer to the nearest percent. For example, if your
computed answer is 99.4% your answer rounds down to 99%. If your computed answer is
99.5% you should round up to 100%.
The Shannon's %Net market contribution = 40%
What is NMC (Net market contribution)?
Net market contribution (NMC) is equal to total sales revenue less total costs (except market costs) minus market costs.
Cost overall (not including market expenses):
150000 packaged (in cans and bottles).
Kegs =80000
WIP Loss/Reduction = 42000
Labor Contracts = 9000
Total Direct Labor: 240000
18000 inbound pounds
180000 in compensation
Total= 719000
Consumer advertising costs 26850 on the market.
Marketing for trade = 31761
Promotional Sales = 18000
Total=76611 Net market contribution=1320271-719000-76611=$ 524660 %NMC=524660/1320271=0.3974=39.74%=40%
To learn more about the Net market contribution from the given link
https://brainly.com/question/16829947
#SPJ1
The map of a walking trail is drawn on a coordinate grid with three points of interest. The trail starts at R(−3, 2) and goes to S(2, 2) and continues to T(2, −5). The total length of the walking trail is
units. (Input whole numbers only.) (3 points)
Answer:
12
Step-by-step explanation:
Use the given data to find the minimum sample size required to estimate the population proportion. Margin of error: 0.04; confidence level: 99%; from a prior study, p is estimated by 0.12.
The value of the minimum sample size required to estimate the population proportion is 438.
What is the margin of error?Your results will vary from the actual population value by how many percentage points, as indicated by the margin of error. A 95% confidence interval with a 4% margin of error, for instance, indicates that your statistic will, 95% of the time, be within 4% of the true population figure.
Given:
The margin of error, ME = 0.04,
The value of p = 0.12,
The confidence level = 99%,
Calculate the minimum sample size as shown below,
ME = z √[p(1 - p) / n]
Calculate the value of z from the table attached below considering the confidence level, z = 2.576,
0.04 = 2.576 √[0.12(1 - 0.12) / n]
Squaring both sides,
0.0016 = 6.636 × 0.12 × 0.88 / n
n = 0.7 / 0.0016
n = 437.9 or 438
To know more about the margin of error:
https://brainly.com/question/11832344
#SPJ1
As part of her science project , Shay is making a model of a wind farm.She wants to put 24 turbines in her model.What arrays can Shay make using 24 turbines
Answer: In Shay's wind farm their can be 4 arrays
Search up the meaning of a Array if you are confused
Step-by-step explanation:
24 has 4 pairs of factors.
1,242,123,84,6the mass of a radioactive substance follows a continuous exponential decay model, with a decay rate parameter of per day. a sample of this radioactive substance was taken six days ago. if the sample has a mass of today, find the initial mass of the sample. round your answer to two decimal places.
As per the concept of exponential decay, the initial mass of the sample is 5,254.87 kg
What is meant by Exponential decay:
In math, the term exponential decay is a very common process especially when we are talking about radioactive materials.
The standard formula for this type of behavior which is written below:
A = Pe^-rt
where
A refers the amount left after time t
P refers the initial amount at t=0
r refers the rate
Here we have given that the mass of a radioactive substance follows a continuous exponential decay model, with a decay rate parameter of per day. a sample of this radioactive substance was taken six days ago.
And we need to find if the sample has a mass of today, then the initial mass of the sample.
Now, we have to substituting the values,
Then we get the equation as,
=> A = (9575 kg)(e^-0.12*5)
When we simplify this one, then we get,
=> A = 5,254.87 kg
Therefore, the initial mass of the sample is 5,254.87 kg
To know more about Exponential decay here.
https://brainly.com/question/13674608
#SPJ4
What is the y intercept of the equation y - 6 = -2(x + 5)
Answer:
Step-by-step explanation:
To find the y-intercept of the equation y - 6 = -2(x + 5), we can set x equal to 0, since the y-intercept is the point where the graph of the equation crosses the y-axis.
Substituting 0 for x, we get:
y - 6 = -2(0 + 5)
y - 6 = -2(5)
y - 6 = -10
y = -4
Therefore, the y-intercept of the equation y - 6 = -2(x + 5) is (0, -4). This means that the graph of the equation crosses the y-axis at the point (0, -4).
givena triangle with side ollenghts of 5 and 8 which iniquality describes all possible lenghs of the thhird side
given a triangle with side of lengths of 5 and 8 then c^2 =89 inequality describes all possible lengths of the third side
In the right triangle of sides a, b, and c
a^2 + b^2 = c^2
Since a = 5 and c = 8
Substitute them in the given rule
we get
25+64= c^2
89= c^2
Take a square root for both sides
c= sqrt 89
learn more about of length here
https://brainly.com/question/28972957
#SPJ4
In Mr.Hernandez class 7 out of 20 students have an A what percent of the students in the class have an A
To figure this out, you set up the fraction
[tex]\dfrac{\text{number that meet the criteria}}{\text{total possible number}}[/tex]
In this case, it's [tex]\dfrac{7 \text{ A's}}{20 \text{ total students}}[/tex].
You then divide 7/20 = 0.35 and convert that decimal into a percent: 35%
Overtime Hours Worked A random sample of 15 registered nurses in a large hospital showed that they worked on average 44.6
hours per week. The standard deviation of the sample was 2.3. Estimate the mean of the population with 99% confidence.
Assume the variable is normally distributed. Round intermediate answers to at least three decimal places. Round your final
answers to one decimal place.
Answer:
With 99% confidence we can say that the mean of the population is between 43.1 and 46.1
Step-by-step explanation:
the data below are the final exam scores of 10 randomly selected statistics students and the number of hours they studied for the exam. find the equation of the regression line for the given data. (points : 4) hours x, 3 5 2 8 2 4 4 5 6 3 scores y, 65 80 60 88 66 78 85 90 90 71
Dependent variable: A dependent variable is a variable that changes or is impacted by other factors. independent variable: An independent variable is a variable that does not change or are impacted by other factors.
What is Regression?Regression is a method for figuring out the relationship between two or more variables. In other words, it is determined by how the predictor variable changes and how the dependent variable changes. Additionally, when more than one independent variable is included in a regression analysis, the change in the dependent is examined while maintaining the same values for the other independent variables.
The best fit for the data is linear regression if the data set is bivariate. The data with two variables are best represented by the straight line known as the least squares regression line.
When the explanatory variable has a value of zero, the response variable's projected value is shown by the regression line's y-intercept (though be wary of extrapolation in interpreting the intercept or other values outside the original data range).
The best fit for the data is linear regression if the data set is bivariate. The data with two variables are best represented by the straight line known as the least squares regression line. The line's equation is provided by,
y = a+bx
where,
a—Intercept
b—Regression coefficient
y—Predicted value of the dependent variable
x —Independent or predictor variable
To know more about reggression visit:
https://brainly.com/question/14313391
#SPJ4
You can use induction. Here's a very very rusty sketch of the proof.
Given -
Union of two regular languages is regular.
Let f(n) be a function representing the union of n regular languages.
Question Is f(n) a regular language?
Lk+1 is the k+1th regular language, for example. The presented hypothesis states that f(n) = f(k+1) is regular since f(k) and Lk+1 are both regular.
What is the purpose of the inductive hypothesis?The induction hypothesis's function The assumption made at the beginning of the induction phase is known as the induction hypothesis, and it is the situation where n = k for the proposition we are trying to prove ("P(k)"). If you don't bring this hypothesis into play at any point throughout the proof of the induction phase, something is amiss.
Given:
It is normal for two regular languages to be combined.
Give the function f(n) the name "union of n regular languages."
Question Is the language f(n) regular?
The union of a single regular language is regular
if n = 1. Base Case
The provided hypothesis tells us that f(2) is regular
if n = 2.
Assume that f(n) is regular for every n = k.
This is the inductive hypothesis.
Let n equal k+1 in the inductive step. The inductive premise tells us that f(k) is a regular language.
Consequently, f(n) = f(k+1) = Lk+1 U f(k) (k)
Lk+1 is the k+1th regular language,
for example. The presented hypothesis states that f(n) = f(k+1) is regular since f(k) and Lk+1 are both regular.
To know more about inductive hypothesis visit:
https://brainly.com/question/29525504
#SPJ4
Fill in the blank.
​_____________ is the distribution of all values of the statistic when all possible samples of the same size n are taken from the same population.
The sampling distribution of statistics
The sampling distribution of statistics is the allocation of all matters of the statistic when all viable examples of the exact size n are taken from the exact people.
What is sampling distribution mean?
The group of averages drawn from all feasible random samples of a certain size (n) drawn from a particular population is referred to as the distribution of sample means.
A statistical probability distribution that results from selecting random samples from a specific population is referred to as a sampling distribution.
It depicts the distribution of frequencies on how dispersed various outcomes will be for a particular population and is also referred to as a finite-sample distribution.
To determine the sample distribution, you must know the population's standard deviation.
Divide the total number of observations in the sample by the sum of all the observations.
To learn more about sampling distribution, refer to:
brainly.com/question/12892403
#SPJ4