Examine the model of the phrases of the moon. Which of these statements is true, based on the information shown in the model.
Select ALL that apply.

A) The new moon occurs when the moon is the sun.
B) The quarter moons occur when the moon is closest to the sun
C) The Full moons Occur when the moon is farthest from the earth.
D) The relative position of the moon, Earth, Sun causes the moon phases.
E) Only half of the moon is illuminated by the sun at any point in the cycle

Examine The Model Of The Phrases Of The Moon. Which Of These Statements Is True, Based On The Information

Answers

Answer 1

Answer:

D and E

Explanation:

I had this quiz as well so-


Related Questions

Two point charges, initially 3 cm apart, are moved to a distance of 1 cm apart. By what factor does the resulting electric force between them change?
A. 3
B. 1/9
C. 1/3
D. 9

Answers

The answer is B (1/9).

In an elastic collision between a moving 10-kg mass and a stationary 10-kg mass half the momentum is transferred to the stationary mass. In this situation the total kinetic energy after the collision is less than it was before the collision. Where did the kinetic energy go?

A) The kinetic energy was destroyed during the collision.

B) Some of the kinetic energy was turned into momentum during the collision.

C) Some of the kinetic energy was turned into heat or used to deform the masses.

D) Some of the kinetic energy was turned into potential energy during the collision.

Answers

Answer: C

Explanation:

USAtestprep

A community plans to build a facility to convert solar radiation to electrical power. The community requires 2.20 MW of power, and the system to be installed has an efficiency of 30.0% (that is, 30.0% of the solar energy incident on the surface is converted to useful energy that can power the community). Assuming sunlight has a constant intensity of 1 020 W/m2, what must be the effective area of a perfectly absorbing surface used in such an installation

Answers

Answer:

The answer is "[tex]\bold{7.18 \times 10^3 \ m^2}[/tex]".

Explanation:

The efficiency system:

[tex]\eta =\frac{P_{req}}{P} \times 10\\\\P =\frac{P_{req}}{\eta} \times 10\\\\[/tex]

   [tex]=(\frac{2.20 \times 10^6 \ W}{30})\times 100\\\\=(\frac{220 \times 10^6 \ W}{30})\\\\=(\frac{22 \times 10^6 \ W}{3})\\\\=7.33 \times 10^6 \ W[/tex]  

Using formula:

[tex]A=\frac{P}{I}[/tex]

Effective area:

[tex]A= \frac{7.33 \times 10^6 \ W}{1020\ \frac{W}{m^2}}\\\\[/tex]

   [tex]=\frac{7.33 \times 10^6 }{1020}\ m^2 \\\\ =0.0071862 \times 10^6 \ m^2 \\\\=7.1862 \times 10^3 \ m^2 \\\\[/tex]  

Scientists are constantly exploring the universe, looking for new planets that support life similar to the life on
Earth. A new planet that supports life would have all of the following characteristics except -
A. a gaseous atmosphere.
B. an orbiting moon.
C. liquid water.
D. protection from radiation.

Answers

The answer would be “B” because humans would need water, protection from radiation so we don’t melt or burn to death lol, and a gaseous atmosphere because we would need oxygen.

A new planet that supports life would have all the following characteristics except an orbiting moon. Hence, option B is correct.

What is a Planet?

An enormous, spherical celestial object known as a planet is neither a star nor its remains. The nebular hypothesis, which states how an interstellar cloud falls out of a nebula to produce a young protostar encircled by a protoplanetary disk, is now the best explanation for planet formation.

By gradually accumulating material under the influence of gravity, or accretion, planets develop in this disk.

The rocky planets Mercury, Venus, Earth, and Mars, as well as the giant planets Jupiter, Saturn, Uranus, and Neptune, make up the Solar System's minimum number of eight planets. These planets all revolve around axes that are inclined relative to their respective polar axes.

To know more about Planet:

https://brainly.com/question/14581221

#SPJ2

Plutonium-238 has a half life of 87.7 years. What percentage of a 5 kilogram (kg) sample remains after 50 years?

Answers

Answer:

i dont know but i should know try g o o g l e

                               

Explanation:

Which statement best describes work in the scientific sense?
O A. Work is the sum of the distances an object moves due to the
forces applied to it.
O B. Work is the number of tasks done in the amount of time needed to
complete them.
O C. Work is the ratio of the force acting on an object and the distance
the object travels.
O D. Work is the product of a force and the distance an object moves
because of the force.

Answers

Answer:

the answer is D I tought

1. Describe the following energy transformations for the following scenario:
A student plays piano in music class.

Answers

Answer:

Explanation:

iphotosynthesis 2coal burning 3electric motor 4 electricity generator 5 waterturbines 6 solar bulb

Q10. Refer to the Condon table to answer question
Second letter
UUU
UCU
UGU
OUC
UCO
UAC
Leu
UAA Btop UOA Stop
UCG UAG Stop UGOT
CU
CCU
CAU CGU
CUC
ССС
САС
Leu
CUA
CGC
Pro
CCA
CAA COA
CUG
CCG
AD
RoecoDoo Do
Asn
AUU
ACU
AUC File
ACC
AUA АСА
AUG Met ACO
AAU
ААС
ΑΛΛΑ
LANG
AGU
Ser
AGC
Thr
Jue AGA
Jara
AGG
sp
GU
QUC
GUA
GUG
GCU GAU
GCC
Ala
GAC
GCA GAA
OCG GAG
GOC
GGA
Jolu 900
Write the mRNA copy of this DNA CCG GA
GCT (original) | Imk]
Use the Condon table above to list all the amin​

Answers

Answer:

so you have a question

Explanation:

either way, have a nice day

stored energy is _________ ___________
kinetic energy
energy in motion
potential energy

Answers

Answer:

Potential energy

Explanation:

Potential energy is stored energy

potential energy is the answer

2. A 4kg object possesses 18J of Kinetic energy. What is the velocity?
Plz help I’ll give you points!

Answers

3 m/s cause Mass of object = 4kg
Velocity = ?
Kinetic energy = 18J
Recall that kinetic energy is the energy possessed by a moving object, and it depends on its mass M and velocity, V
Thus, Kinetic energy = 1/2 x mv^2
18J = 1/2 x 4kg x v^2
18J = 0.5 x 4kg x v^2
18J = 2kg x v^2
v^2 = 18/2
v^2 = 9
v = √9 (square root of 9)
v = 3 m/s

Lucy moves down the hall at 3.5 m/s. When he sees Luke coming, he slows down. After 4.0 s, he is moving at 2.1. m/s. What is his acceleration?​

Answers

Answer:

Acceleration, a = 0.35 m/s²

Explanation:

Given the following data;

Initial velocity, u = 3.5 m/s²

Final velocity, v = 2.1 m/s²

Time, t = 4 secs

To find the acceleration, we would use the first equation of motion;

V = u - at (the sign is negative because Lucy is slowing down).

Substituting into the formula, we have;

2.1 = 3.5 - a(4)

2.1 = 3.5 - 4a

4a = 3.5 - 2.1

4a = 1.4

a = 1.4/4

a = 0.35 m/s²

Some thermometers contain alcohol. Alcohol is used in thermometers because


A. is soluble in water

B. is a clear gas when it evaporates

C. expands and contracts easily

D. has a high density

Answers

Answer:

Explanation:

Option C is the correct answer

Some thermometers contain alcohol. Alcohol is used in thermometers because expands and contracts easily. The correct option is C.

What is thermometer?

Thermometer is the temperature measuring device which consists of a liquid in the bulb which expands as the temperature is increased.

The liquid metal used in the thermometer must have the property to respond on the hotness and coldness rapidly.

In place of mercury, some thermometers use alcohol because an alcohol has a very low freezing point as compared to the Mercury.

Thus, the correct option is C.

Learn more about thermometers.

https://brainly.com/question/24189042

#SPJ2

Some thermometers contain alcohol. Alcohol is used in thermometers because expands and contracts easily.

A person, with his ear to the ground, sees a huge stone strike the concrete pavement. A moment later two sounds are heard from the impact: one travels in the air and the other in the concrete, and they are 6.4 s apart. Part A How far away did the impact occur? (Use vair=343m/s , vconcrete=3000m/s )

Answers

Answer:

The impact occured at a distance of 2478.585 meters from the person.

Explanation:

(After some research on web, we conclude that problem is not incomplete) The element "Part A" may lead to the false idea that question is incomplete. Correct form is presented below:

A person, with his ear to the ground, sees a huge stone strike the concrete pavement. A moment later two sounds are heard from the impact: one travels in the air and the other in the concrete, and they are 6.4 seconds apart. How far away did the impact occur? (Sound speed in the air: 343 meters per second, sound speed in concrete: 3000 meters per second)

Sound is a manifestation of mechanical waves, which needs a medium to propagate themselves. Depending on the material, sound will take more or less time to travel a given distance. From statement, we know this time difference between air and concrete ([tex]\Delta t[/tex]), in seconds:

[tex]\Delta t = t_{A}-t_{C}[/tex] (1)

Where:

[tex]t_{C}[/tex] - Time spent by the sound in concrete, in seconds.

[tex]t_{A}[/tex] - Time spent by the sound in the air, in seconds.

By suposing that sound travels the same distance and at constant speed in both materials, we have the following expression:

[tex]\Delta t = \frac{x}{v_{A}}-\frac{x}{v_{C}}[/tex]

[tex]\Delta t = x\cdot \left(\frac{1}{v_{A}}-\frac{1}{v_{C}} \right)[/tex]

[tex]x = \frac{\Delta t}{\frac{1}{v_{A}}-\frac{1}{v_{C}} }[/tex] (2)

Where:

[tex]v_{C}[/tex] - Speed of the sound in concrete, in meters per second.

[tex]v_{A}[/tex] - Speed of the sound in the air, in meters per second.

[tex]x[/tex] - Distance traveled by the sound, in meters.

If we know that [tex]\Delta t = 6.4\,s[/tex], [tex]v_{C} = 3000\,\frac{m}{s}[/tex] and [tex]v_{A} = 343\,\frac{m}{s}[/tex], then the distance travelled by the sound is:

[tex]x = \frac{\Delta t}{\frac{1}{v_{A}}-\frac{1}{v_{C}} }[/tex]

[tex]x = 2478.585\,m[/tex]

The impact occured at a distance of 2478.585 meters from the person.

A sound wave travels with a velocity of 1.5 m/s and has a frequency of 500 Hz. What is its wavelength?

Answers

velocity, wavelength, and frequency.

Wave velocity (v) is how fast a wave propagates in a given medium. Its unit is meter per second. Check the speed calculator for more information about speed and velocity.

Wavelength (λ) is the distance over which the shape of a wave repeats. It depends on the medium in which a wave travels. It is measured in meters.

Frequency (f) of a wave refers to how many times (per a given time duration) the particles of a medium vibrate when the wave passes through it. The unit of frequency is Hertz or 1/second.

A circular cylinder has a diameter of 3.0 cm and a mass of 25 g. It floats in water with its long axis perpendicular to the water's surface. It is pushed down into the water by a small distance and released; it then bobs up and down. Part A What is the oscillation frequency

Answers

Answer:

   f = 5.3 Hz

Explanation:

To solve this problem, let's find the equation that describes the process, using Newton's second law

        ∑ F = ma

where the acceleration is

         a = [tex]\frac{d^2 y}{dt^2 }[/tex]

        B- W = m \frac{d^2 y}{dt^2 }

To solve this problem we create a change in the reference system, we place the zero at the equilibrium point

           B = W

In this frame of reference, the variable y'  when it is oscillating is positive and negative, therefore Newton's equation remains

         B’= m [tex]\frac{d^2 y'}{dt^2 }[/tex]

           

the thrust is given by the Archimedes relation

         B = ρ_liquid g V_liquid

     

the volume is

        V = π r² y'

     

we substitute

          - ρ_liquid g π r² y’ = m \frac{d^2 y'}{dt^2 }

          [tex]\frac{d^2 y'}{dt^2} + \rho_liquid \ g \ \pi r^2/m ) y' \ =0[/tex]

this differential equation has a solution of type

         y = A cos (wt + Ф)

where

         w² = ρ_liquid g π r² /m

angular velocity and frequency are related

         w = 2π f

         

we substitute

          4π² f² = ρ_liquid g π r² / m

          f = [tex]\frac{1}{2\pi } \ \sqrt{ \frac{ \rho_{liquid} \ \pi r^2 \ g}{m } }[/tex]

calculate

         f = [tex]\frac{1}{2 \pi } \sqrt{ \frac{ 1000 \ \pi \ 0.03^2 \ 9.8 }{0.025} }[/tex]

         f = 5.3 Hz

Do anyone answer this question​

Answers

Answer:

B) 10^-2 cm/s

in term of meter. it is 10^-4 m/s

Explanation:

Model the Earth's atmosphere as 79% N2, 19% O2, and 2% Argon, all of which are in thermal equilibrium at 280 K. At what height is the density of O half its value at sea level

Answers

Answer:

[tex]9.495 \times 10^3\ m[/tex]

Explanation:

From the given information:

Using the equation of Barometric formula as related to density, we have:

[tex]\rho (z) = \rho (0) e^{(-\dfrac{z}{H})} \ \ \ \ --- (1)[/tex]

Here;

[tex]p(z) =[/tex] the gas density at altitude z

[tex]\rho(0) =[/tex] the gas density  at sea level

H = height of the scale

[tex]H = \dfrac{RT}{M_ag } \ \ \ --- (2)[/tex]

Also;

R represent the gas constant

temperature (T) a= 280 K

g = gravity

[tex]M_a =[/tex] molaar mass of gas; here, the gas is Oxygen:

[tex]M_a =[/tex] 15.99 g/mol

= 15.99 × 10⁻³ kg/mol

[tex]H = \dfrac{8.3144 \times 280}{15.99 \times 10^{-3} \times 9.8 }[/tex]

[tex]H =14856.43 \ m[/tex]

Now we need to figure out how far above sea level the density of oxygen drops to half of what it is at sea level.

This implies that we have to calculate z;

i.e. [tex]\rho(z) =\dfrac{\rho(0) }{(2)}[/tex]

By using the value of H and [tex]\rho(z)[/tex] from (1), we have:

[tex]\dfrac{\rho(0) }{(2)} = \rho (0) e^{(-\dfrac{z}{14856.43})}[/tex]

[tex]\dfrac{1}{2} = e^{(-\dfrac{z}{14856.43})} \\ \\ e^{(-\dfrac{z}{14856.43})} =\dfrac{1}{2}[/tex]

By rearrangement and taking the logarithm of the above equation; we have:

[tex]- z = 14856.43 \times \mathtt{In}\dfrac{1}{2} \\ \\ -z = 14856.43 \times (-0.6391) \\ \\ z = 9495 \ m \\ \\ z = 9.495 \times 10^3\ m[/tex]

As a result, the oxygen density at  [tex]9.495 \times 10^3\ m[/tex] is half of what it is at sea level.

Which two options describe physical properties of matter

Answers

It’s at reverse I can’t see the picture very well

A 2:2 kg toy train is con ned to roll along a straight, frictionless track parallel to the x-axis. The train starts at the origin moving at a speed of 1:6m=s in the +x direction, and continues until it reaches a position 7:5m down the track from where it started. During its journey, it experiences a force pointing in the same direction as the vector 0:6 +0:8 , with magnitude initially 2:8N and decreasing linearly with its x-position to 0N when the train has finished its journey.

Required:
a. Calculate the work done by this force over the entire journey of the train.
b. Find the speed of the train at the end of its journey.

Answers

Answer:

a) 10.51 J

b) 3.48 m/s

Explanation:

Given data :

mass of train ( M ) = 2.2 kg

Given initial velocity ( u ) = 1.6 m/s

a) calculating work done by the force over the journey of the train

F = mx + b  ------ ( 1 )

m = slope  = ( Δ f / Δ x ) = 2.8 / -7.5 = - 0.373 N/m

x = distance travelled on the x axis by the train = 7.5 m

F = force experienced by the train = 2.8 N

x = 0

∴ b = 2.8

hence equation 1 can be written as

F = ( -0.373) x + 2.8   ----- ( 2 )

hence to determine the work done by the force

W   = [tex]\int\limits^7_0 { ( -0.373) x + 2.8 )} \, dx[/tex]     Note:  the limits are actually 7.5 and 0

∴ W ( work done ) = -10.49 + 21 = 10.51 J

b) calculate the speed of the train at the end of its journey

we will apply the work energy theorem

W = 1/2 m*v^2  -  1/2 m*u^2

∴ V^2 = 2 / M ( W + 1/2 M*u^2 )  ( input values into equation )

 V^2 = 12.11

hence V = 3.48 m/s

HURRY IM TIMED!

The age and gender of an audience are important to consider when deciding on a subject.
True
False

Answers

Answer:

True.

Explanation:

true

knowing your audience there General age gender education level religion language culture and gave group members is the single most important aspect of developing your speech this means the speaker dock smart the audience wasn't often without asking question or spending with any feedback

How does the presence of a nucleus provide a method of basic cell
classification? *

Answers

Answer:

The nucleus-containing cells are called eukaryotic cells. Eukaryote means having membrane-bound organelles.

Explanation:

I hope this is what you were looking for?!

Hope this helps!

Have a great day!

-Hailey!

The cells which have a nucleus are called Eukaryotic cells. The cells which do not have a nucleus are called prokaryotic cells.

What is a nucleus?

The nucleus is the controlling center of the body. It performs all the major activities in the cell. The cell which possesses a nucleus is called a eukaryote. The cell which does not have a nucleus is called prokaryote.

A prokaryotic cell is a straightforward, one-celled (unicellular) organism that is devoid of a nucleus or any other organelle that is membrane-bound. The nucleoid, a dark area in the center of the cell, is where prokaryotic DNA is located.

Therefore, The cells which have a nucleus are called Eukaryotic cells. The cells which do not have a nucleus are called prokaryotic cells.

To learn more about cell, refer to the link:

https://brainly.com/question/3142913

#SPJ2

A fisherman notices that his boat is moving up and down periodically without any horizontal motion, owing to waves on the surface of the water. It takes a time of 2.00 s for the boat to travel from its highest point to its lowest, a total distance of 0.600 m . The fisherman sees that the wave crests are spaced a horizontal distance of 6.40 m apart.

Required:
a. How fast are the waves traveling?
b. What is the amplitude of each wave?
c. If the total vertical distance traveled by the boat were 0.30 m but the other data remained the same, how would the answers to parts (a) and (b) be affected?

Answers

Answer:

a. Speed = 1.6 m/s

b. Amplitude = 0.3 m

c. Speed = 1.6 m/s

Amplitude = 0.15 m

Explanation:

a.

The frequency of the wave must be equal to the reciprocal of the time taken by the boat to move from the highest point to the highest point again. This time will be twice the value of the time taken to travel from the highest point to the lowest point:

frequency = [tex]\frac{1}{2(2\ s)}[/tex] = 0.25 Hz

The wavelength of the wave is the distance between consecutive crests of wave. Therefore,

Wavelength = 6.4 m

Now, the speed of the wave is given as:

Speed = (Frequency)(Wavelength)

Speed = (0.25 Hz)(6.4 m)

Speed = 1.6 m/s

b.

Amplitude is the distance between the mean position of the wave and the extreme position. Hence, it will be half the distance between the highest and lowest point:

Amplitude = (0.5)(0.6 m)

Amplitude = 0.3 m

c.

frequency = [tex]\frac{1}{2(2\ s)}[/tex] = 0.25 Hz

Speed = (Frequency)(Wavelength)

Speed = (0.25 Hz)(6.4 m)

Speed = 1.6 m/s

Amplitude = (0.5)(0.3 m)

Amplitude = 0.15 m

Which macronutrient is made up of carbon and hydrogen elements joined together in long groups called hydrocarbons?

 Proteins Magnesium Potassium Fats​

Answers

Answer:

FATS

Explanation:

Fats are made up of carbon and hydrogen elements joined together in long groups called hydrocarbons. The simplest unit of fat is the fatty acid, of which there are two types: saturated and unsaturated.

The macronutrient which is made up of carbon and hydrogen elements joined together in long groups called hydrocarbons is: D. Fats​.

A macronutrient refers to a very large molecule (structure) that comprises covalently bonded organic atoms (hydrocarbons) and smaller molecular structures (monomers).

In Science, macronutrients are grouped into four (4) main categories and these are;

Nucleic acid.Carbohydrates.Proteins.Fats (Lipids).

Fats (Lipids) are macronutrients that are typically made up of both carbon and hydrogen elements, which are joined together in long groups referred to as hydrocarbons.

Find more information: https://brainly.com/question/14681125

A rock falls from a cliff and hits the ground at a velocity of 31m/s. How long did it take to fall?

Answers

Answer:

i dont know  man

Explanation:

i dont know man

I am b o r e d, I am very very b o r e d!
I'm b o r e d with Lazarbeam Quarantine edition
episode 2352 because apparently the quarantining never ends :(

Answers

oh , not sure what that is but
Ok try to do something funn ig

A thin uniform rod (length = 1.2 m, mass = 2.0 kg) is pivoted about a horizontal, frictionless pin through one end of the rod. (The moment of inertia of the rod about this axis is ML2/3.) The rod is released when it makes an angle of 37° with the horizontal. What is the angular acceleration of the rod at the instant it is released (in rad/s^2)?

Answers

Answer:

A: 9.8 rad/s2

B: 7.4 rad/s2

C: 8.4 rad/s2

D: 5.9 rad/s2

E: 6.5 rad/s2

I think the answer is A 9.8rad/s2


Find the speed of a wave with a frequency of 18 Hz and a wavelength of 6 meters. Show work. WILL MARK BRAINLIEST IF CORRECT

Answers

Answer:

so i would say 11.4 i dont have work only this link

Explanation:

https://flexbooks.ck12.org/cbook/ck-12-physics-flexbook-2.0/section/11.4/primary/lesson/wave-speed-ms-ps

The model shows the star Wolf 359, the sun, and Star X. It takes 7.8 years for light produced on Wolf 359 to reach the sun.

If Star X is 50 times as far from the sun as Wolf 359 is, how far is Star X from the sun, to the nearest light-year?

Answers

Answer:

390 light-years

Explanation:

50 x 7.8 =390

NASA’s Tracking and Data Relay Satellite (TDRS) System constellation resides at geosynchronous orbit (35,000km) altitude. If a technician at the Goddard Spaceflight Center in Maryland initiates a transmission to the Johnson Spaceflight Center in Houston over TDRS, how long will it be until JSC detects the transmission (one-way latency)? You may assume there is negligible processing delay on the satellite, and that c = 3x108 m/sec.

Answers

Answer:

35,000 km = 35,000,000 m = 3.5 E107 m

t = S / v = 3.5 * 10E7 / 3.0 E10E8 = .117 sec

describe briefly how you can a body​

Answers

Answer:

what

you need to elaborate

Answer: Can you please write question clearly.

Explanation:

Other Questions
What habit should you follow to avoid the risk of contracting illnesses and infections?Maintaining personal ____ is important to avoid the risk of contracting illnesses and infections. Please help I will give brainliest IF IT IS CORRECT im just clueless i need help Describe 2 things China has done to address the population problem. Does grain size determine the porosity of a sediment type? please help with this. i can even give brainliest!!!! The side lengths of a rectangle are all multiplied by 5. What happens to its perimeter? Cuales son las razones que expliquen el por qu las empresas deben realizar una Investigacin de Mercado, post pandemia 6) Find the probability of rolling a multiple of 1. Look at the image, help ! please help me will give branlist Write the equation of a line going through the points: (1, -2) and (-2, 4) Arun has captured many yellow-spotted salamanders. He weights each and then counts the number of yellow spots on its back 20 POINTS PLS FASTWhich situation could NOT represent a proportional relationship?A The amount a babysitter who makes $7.50 per hour earns in h hoursB The cost of purchasing p pounds of oranges for $1.35 per poundC The number of gallons of water in x barrels with 13 gallons of water in each barrellD The weight in x weeks of a cat that gains 1 pound per week if its starting weight is 4 pounds Select all statements that show correct reasoning for finding 15 2/9 * Multiply 15 by 2, then divide by 9. Multiply 15 by 9, then divide by 2. Multiply 15 by 1/9, then multiply by 2. Multiply 15 by 9, then multiply by 1/2 8. In the food web below, which organism is NOT considered a consumer? F. Kingfisher G.TadpoleH.AlgaeJ.Snail Solve 2 1/9^x = 2/81 for x Find the sum: (x^5 - 2x^4 + 3x^2 - 6) + (3x^4 + 4x^2 + x + 4). Enter your answer as apolynomial in descending order below, and use the caret (^) for exponents.For example, you would write 4x2 as 4x^2. Grant made a $2800 investment that piece is simple interest rate at 6% per year. To the nearest hundredth which of the following is the amount of interest here and after one yearF. $1,680.00G. $46.67H. $466.67J. $168.00Please help ASAP List three features of the third generation of computers