The deceleration in innovation may have been connected with a. progress in communication, migration of artisans, and publication of books.
The 16th century was a period for vigorous economic expansion. The economic expansion is the biggest factor to other transformation in society including cultural, political, science, and workers and the fact that the population in most areas in Europe was significantly increase than before centuries. So, these factors make technology in Europe especially in scientific instrument to advance.
The transformation of society and advances in technology in various fields including communication and transportation mean that crafters can easily learn from other crafters to improve their technology, this slows down innovation.
Learn more about 16th century here:
brainly.com/question/4656813
#SPJ4
you have been using the same computer for several years. to improve performance, you decide to upgrade the processor. you check the motherboard documentation and purchase the fastest processor that is supported by the motherboard. however, when you try to start the computer, it beeps regularly, and nothing is displayed on the screen. which of the following actions will most likely resolve this issue? (select two.)
The old CPU should be reinstalled in the motherboard. Flash the firmware for the UEFI.
The most likely course of action to take to remedy this problem is:- To update system components, such as to a faster processor, flashing the BIOS or UEFI firmware is frequently necessary. The problem could be resolved by updating the BIOS or UEFI firmware to the most recent version if the motherboard literature indicates that the CPU is compatible but it is not correctly detected.
To get the old CPU operating again before you can do this, you must reinstall it in the system. Symmetric multiprocessors share a single main memory among two or more similar processors. Both separate chips and chips with many cores can be used as the multiple processors.
To know more about motherboard visit:-
https://brainly.com/question/29834097
#SPJ4
Consider the following code segment, which traverses two integer arrays of equal length. If any element of arr1 is smaller than the corresponding (i.e., at the same index) element of minArray, the code segment should replace the element of minArray with the corresponding element of arr1. After the code segment executes, minArray should hold the smaller of the two elements originally found at the same indices in arr1 and minArray and arr1 should remain unchanged.
for (int c = 0; c < arr1.length; c++)
{
if (arr1[c] < minArray[c])
{
arr1[c] = minArray[c];
}
else
{
minArray[c] = arr1[c];
}
}
Which of the following changes will ensure that the code segment always works as intended?
Changing the Boolean expression in line 1 to c <= arr1.length
Changing the Boolean expression in line 1 to c <= arr1.length
Changing the relational operator in line 3 to >
Changing the relational operator in line 3 to >
Removing lines 5–8
Removing lines 5–8
Swapping the positions of line 5 and line 9
Swapping the positions of line 5 and line 9
Removing lines 7–10
Removing lines 7–10 will ensure that the code segment always works as intended.
What is code segment?
A code segment is a block of code within a program that performs a specific task. It is a piece of code that can be reused in several different places throughout the program, eliminating the need to rewrite the code each time it is needed. Code segments are often used for commonly used algorithms, repeated calculations, and other general tasks. They can also be used to define the logic behind a program, allowing for easy customization and modification. Code segments are an important part of programming and are used to make programs more efficient, organized, and maintainable.
To learn more about code segment
https://brainly.com/question/29538776
#SPJ1
FILL IN THE BLANK Technology in those cases is often called a ______ innovation because companies can falter if they fail to respond with effective innovations of their own.
Technology in those cases is often called a disruptive innovation because businesses may suffer if they don't produce successful inventions of their own in response.
What is disruptive innovation ?Disruptive innovation, according to business theory, is innovation that establishes a new market and value network or enters a market from the bottom and eventually supplants long-established market-leading companies, goods, and alliances.Disruptive innovation opens up a completely new market with enormous potential and provides a more accessible, yet still inexpensive, solution to a larger client base. Disruptive technologies are innovations that have a substantial impact on how consumers, markets, and businesses operate.Even breakthrough innovations don't always cause disruption. For instance, because early automobiles were expensive luxury items that did not disrupt the market for horse-drawn vehicles, they were not disruptive innovations when they were introduced in the late 19th century. Up until the 1908 release of the less expensive Ford Model T, the transportation business virtually remained unaffected. Because it revolutionised the transportation industry, unlike the first thirty years of automobiles, the mass-produced automobile was a disruptive innovation.To learn more about disruptive innovation refer :
https://brainly.com/question/15703392
#SPJ4
Which of the following is an example of code written in a high-level programming language?
answer choices
O Add the number 2 to the number 5, then subtract this from the number 10 and display the answer.
O LD R0 8
LD R1 3
SUB R1 R0
LD R2 1
ADD R2 R0
ST R0 X
O num1 = 8 - 3
num2 = 2 * num1 + 1
print(num2)
O 00101100
01010000
11011000
10110111
Python, JavaScript, Visual Basic, Delphi, Perl, PHP, ECMAScript, Ruby, C#, Java, and many other high-level programming languages are examples of ones that are now in use.
Which of the following represents a high-level programming language example?High-level languages include Ada, BASIC, C, COBOL, FORTRAN, and Pascal, to name a few. Noun. A computer programming language designed to represent the needs of a problem that mimics natural language or mathematical notation.Hardware restrictions are not an issue while writing a programme in a high-level language. However, a programme written in a high-level language needs to be converted into machine code before it can be executed by a computer. The most well-known high-level languages are Java, C/C++, and BASIC.High-level programming languages include BASIC, C, C++, COBOL, FORTRAN, Java, Perl, PHP, Python, Ruby, Visual Basic, and Pascal. These languages are simpler to learn because of their strong context, style, and abstraction.It is frequently used to make general-purpose software programmes and software applications, like word processors and web browsers.To learn more about example of high level language refer to:
https://brainly.com/question/23640168
#SPJ4
you will create the interface for the application and identify features for the application. you do not necessarily have to implement the logic for all of the event handlers but you should print a toast message stating what an individual event handler should do. you will be judged on the construction of your app in terms of how many activities and fragments you implement and how you deal with data management issues such as file i/o and/or sqlite. you may reuse components from your previous assignments.
The primary point of user interaction and the function of the UI are to display application data on the screen.
The UI should refresh to reflect any time the data changes, whether as a result of user activity (such as hitting a button) or outside input (such as a network response). The user interface effectively serves as a visual representation of the program state as it has been obtained from the data layer.
The information you need to show is typically not in the same format as the application data you receive from the data layer. For instance, to show information that is pertinent to the user, you could just require a portion of the data or you might need to combine data from two distinct sources. Whatever logic you use, you must feed the UI all the data it requires to render everything correctly. The pipeline that transforms application data changes into a format that the UI can show and then displays them is known as the user interface layer.
Know more about application here:
https://brainly.com/question/28650148
#SPJ4
which of the following is the result of bi that implies that the data have been documented as the certified or approved data for the enterprise?
The process of preparing and analyzing data using a BI tool in order to find and share important insights is widely defined as business intelligence reporting.
Which technique or tool is used to analyze data for business intelligence purposes?Faster, more accurate reporting and analysis, better data quality, improved employee satisfaction, decreased costs and increased revenues, and the capacity to make better business decisions are just a few of the numerous advantages businesses can experience after incorporating BI into their business models.
Business intelligence reporting is generally understood to be the process of using a BI tool to prepare and analyze data in order to discover and disseminate useful insights. In this approach, BI reporting supports users in making better decisions and enhancing business performance.
Users can examine data from a variety of data sources using OLAP techniques. This business intelligence tool helps users in the corporate world understand challenges and examine them from many angles.
Therefore, bi that implies that the data have been documented as the certified or approved data for the enterprise is reliable.
To learn more about Business intelligence reporting refer to:
https://brainly.com/question/25192968
#SPJ4
The A+ examination requires you to understand bus architectures. As you work you will be installing a number of network cards, sound cards, and video cards. Which of the following is a downfall of Peripheral Component Interconnect?
a. It can only support three devices at a time
b. It has a fixed width of 64 bits
c. It has a fixed width of 32 bits
d. It can only support one device at a time
C. 32 bits. Peripheral Component Interconnect (PCI) has a fixed width of 32 bits and can only handle five devices at a time. PCI-X is 64 bits and provides more bandwidth.
While installing a number of network cards, sound cards, and video cards, one of the downfall of Peripheral Component Interconnect is that it has a fixed width of 32 bits.
Most people take Peripheral Component Interconnect (PCI) slots for granted because they are such a crucial component of a computer's architecture. PCI has long been a flexible, reliable method of the connecting network, sound, and video cards to a motherboard.
PCI, however, has several drawbacks. PCI has remained the same as processors, video cards, sound cards, and networks have become quicker and more potent. It can only support 5 devices at once and has a limited width of 32 bits. The more recent, 64-bit PCI-X bus offers additional bandwidth, but its wider design exacerbates some of PCI's other problems.
Many of these drawbacks are resolved by a new standard called PCI Express (PCIe), which also offers increased bandwidth and compatibility with current operating systems.
To learn more about video cards click here:
brainly.com/question/14380167
#SPJ4
In order to complete each sentence, click and drag each word or phrase into the appropriate blank. Then, place the given events of fertilization in a logical order.
Sperms for two, noun, plural, sperms. spermatozoon, a cell of male reproduction.
What root word means seed or sperm?The fallopian tube, which connects the egg with the uterus, guides it. In the event of fertilization, it clings to the uterine wall, signaling the start of pregnancy. The uterus is where an unfertilized egg begins to degrade. Through the cervix, which is the uterine base, it exits the uterus.
Zygote, cleavage, morula, blastocyst, embryo, and fetus are the proper list of those that was given. To put it succinctly, the act of fertilization begins when a sperm cell penetrates the egg. The oocyte has now transformed into a zygote as a result of the union of the egg and sperm cells.
The prefix spermato-, which means "seed" and "sperm," is a combining form. The reproductive cells in semen are known as sperm.
To learn more about logical order refer to :
https://brainly.com/question/1294562
#SPJ1
html a website style that rarely changes its content and displays information the same way to all users a website style that generates a web page directly from the server depending on the context of the user a place on the web that lets you make a fully functioning, professional website with no special software and a minimum amount of expertise and money principal programming language resolved and rendered by browsers
No matter the sort of user viewing the website or the browser they are using, these websites will display the same content.
Hypertext markup languages like HTML and HTML5 are generally used to create web pages or applications. The most recent version of HTML, HTML5, supports brand-new markup language features including multimedia, brand-new tags and components, and brand-new APIs. Video and audio are also supported by HTML. A dynamic web page is one that changes what is displayed each time it is viewed. For instance, the page might alter according on the time of day, the visitor to the website, or the nature of their engagement. Dynamic web pages might be of two different types.
Learn more about website here-
https://brainly.com/question/19459381
#SPJ4
according to cnet the proportion of smartphone owners who use a certain operating system is 0.161. which of the following describes the centers and variabilities that should be apparent in the distributions generated by simulation p and simulation q?
An operating system for mobile devices is one that is designed for non-laptop personal mobile computing devices, such as smartphones, tablets, smartwatches, and smartglasses.
What is Mobile operating system?Even if devices like conventional laptops are "mobile," the operating systems that run them are typically not also since they were created for desktop computers, which historically did not require or have specific mobile functionality. Due to the fact that more modern hardware has evolved to be more portable and smaller than older hardware, the line separating mobile from other forms has been hazy in recent years. The development of tablet computers, lightweight laptops, and 2-in-1 PCs, which combine the two, are significant developments that blur this divide.Mobile operating systems combine desktop computer functions with other characteristics that are helpful for mobile or portable use. They typically have a wireless integrated modem and SIM tray for telephony and data connectivity. The biggest number of cellphones ever sold—more than 383 million—were sold in Q1 2018, with 86.2% running Android and 12.9% iOS. Nevertheless, 2021 saw record sales, 1.43 billion to be exact, with 83.32 percent of them being Android, even though they were lower than in 2018 (1.56 billion). Even without mentioning tablets, smartphone use outpaces PC use, and Android alone is more popular than the well-known desktop operating system Microsoft Windows.To Learn more About mobile devices refer to:
https://brainly.com/question/23433108
#SPJ4
this lab is an extension to lab 06. you should build upon your existing work in lab 06 and add an additional functionality of supporting standard input and output redirection. for this lab, you will implement a program that continually prompts the user to enter a shell command with its options and ar- guments. the command may contain standard input and output redirection operators (e.g., cat file1.txt > output.txt, wc -cl < input.txt, head -n 5 < input.t
The goal of this project is to create a C program that acts as a shell interface and runs each command in its own process after accepting it from the user.
The goal of this project is to create a C program that acts as a shell interface and runs each command in its own process after accepting it from the user. Input and output redirection will be supported by your implementation, and pipes as an IPC method between two commands will also be supported. This project can be finished on a Linux machine and requires the use of the UNIX fork(), exec(), wait(), dup2(), and pipe() system functions.
The user is presented with a prompt through a shell interface, and then the following command is typed. The following example demonstrates the osh> prompt and the user's subsequent command: cat program c (This command uses the UNIX cat command to display the file prog.c on the terminal.)
Having a shell interface is one method of implementing a shell interface.
Know more about program here:
https://brainly.com/question/14368396
#SPJ4
coronado cannot use the income statement as a measure of cash flows because it is calculated on a(n) basis rather than a(n) basis.
A company's sources and uses of cash are tracked by a cash flow statement, whereas its financial performance is assessed by an income statement.
What distinguishes an income statement from a cash flow statement?The cash flows from a company's investing, financing, and operating activities are listed on a cash flow statement. Users can view a company's sales, profits, costs, and losses over a certain time period by consulting an income statement.
Income statements or cash flow statements: which is more significant?The income statement, which shows a company's potential to make a profit, is likely to be the most crucial financial statement for the majority of users.
To know more about income visit:-
https://brainly.com/question/14732695
#SPJ4
write a statement that creates a dictionary containing the following key-value pairs: 'a' : 1 'b' : 2 'c' : 3
Answer:
my_dict = {'a': 1, 'b': 2, 'c': 3}
information technology law is the legal framework that applies to the collection, storage, and distribution of digital information.
Information technology law is the legal framework that applies to the collection, storage, and distribution of digital information is true.
What is information technology?Information technology is defined as the creation, processing, storing, retrieving, and exchanging of data and information of all types using computers. Information technology contributes to the development and expansion of the business and commercial sector as well as to maximizing output.
The legal framework for gathering, preserving, and transmitting electronic information in the global economy is provided by information technology law. Lawyers who specialize in this area of the law represent both individuals and companies across all sectors of the economy.
Thus, information technology law is the legal framework that applies to the collection, storage, and distribution of digital information is true.
To learn more about information technology, refer to the link below:
https://brainly.com/question/14426682
#SPJ1
You are the manager in charge of maintaining desktop computers. A user reports that she can't turn her computer on. After some investigation, you find that the power supply is malfunctioning.
Which of the following actions should you perform NEXT?
Document the problem.
Fix the problem.
Create an action plan.
Determine whether escalation is required.Create an action plan.
The correct option is c) Create an action plan. An action plan is a detailed description of the steps and materials required to finish a project or reach a goal.
An action plan is a thorough strategy that outlines the steps to take in order to accomplish one or more goals. [Reference needed] An alternative definition is a "series of actions that must be taken, or tasks that must be successfully completed, for a strategy to succeed." An action plan, for instance, might be used by a city to present ideas for enhancing a neighbourhood with more open space, amenities, living streets, and better rail service. a strategy with enough specifics to accomplish a goal or objective. An action plan is a detailed description of the steps and materials required to finish a project or reach a goal. It can be viewed as a visual countdown to project completion or as a list of tasks required to produce desired outcomes.
Learn more about action plan here
https://brainly.com/question/27584913
#SPJ4
pip is configured with locations that require tls/ssl, however the ssl module in python is not available
Using the knowledge in computational language in python it is possible to write a code that pip is configured with locations that require tls/ssl, however the ssl module.
Writting the code:find /etc/ -name openssl.cnf -printf "%h\n"
/etc/ssl
curl -O
tar xzf openssl-VERSION
pushd openssl-VERSION
./config \
--prefix=/usr/local/custom-openssl \
--libdir=lib \
--openssldir=/etc/ssl
make -j1 depend
make -j8
make install_sw
popd
pushd python-3.x.x
./configure -C \
--with-openssl=/usr/local/custom-openssl \
--with-openssl-rpath=auto \
--prefix=/usr/local/python-3.x.x
make -j8
make altinstall
See more about python at brainly.com/question/18502436
#SPJ1
g show also the binomial tree with the calculation of the call and then a binomial tree with the calculation of the put. below is a simple example what you could do. you can arrange your spreadsheet as you want but it has to be clear and formulas behind each cell should been seen when on the cell. note that it is only a two steps binomial tree but you have to build one that has 12 steps.
You may observe cells and their formulas in the Watch Window toolbar when they are hidden on a worksheet.
Large worksheets can be easily inspected, audited, or verified for formula results using the Watch Windows. You can navigate your worksheet without continuously scrolling or visiting different locations by using the Watch Window. Like other toolbars, this one can be docked or relocated. For instance, you may dock it at the window's base. The workbook, sheet, name, cell, value, and formula of a cell are all kept track of by the toolbar. On the Home tab, under the Editing group, click Find & Replace, click Go To Special, and then click Formulae to select every cell on a worksheet that contains formulas.
Learn more about windows here-
https://brainly.com/question/28525121
#SPJ4
The off-by-one error is commonly encountered when writing to these entities. Character strings can be represented as these entities with a trailing null byte, and the lack of bound checking on these structures can result in the overwriting of memory addresses. In C and C++, these entities are defined using square brackets, and in most languages, their indices start at zero. For 10 points, name these data structures that contain elements of the same data type, which can be two-dimensional and are thus analogous to matrices.
Special types of these include ones that are indexed by non-integer values or begin at index 1 and stores children at 2n and 2n+1, and are known as hash tables and heaps, respectively. Addressing in this structure uses (*) pointers to refer to a specific memory address. A one-dimensional one of these can also be known as a vector. For 10 points, name this data structure, analogous to the matrix in mathematics, which stores multiple elements of the same type in contiguous memory locations.
The array is the data structure in which the off-by-one error is commonly encountered when writing to these entities.
A group of objects kept in consecutive memory regions is known as an array. The goal is to group objects of the same category for storage. As a result, it is simpler to determine each element's position by simply adding an offset to a base value or the address in memory where the array's first element is stored (generally denoted by the name of the array). The array's index may be used to uniquely identify each element (in a similar way as you could identify your friends by the step on which they were on in the above example).
To know more about consecutive memory click on the below link:
https://brainly.com/question/19634243
#SPJ4
Using the CelsiusToKelvin function as a guide, create a new function, changing the name to KelvinToCelsius, and modifying the function accordingly.
#include
using namespace std;
double CelsiusToKelvin(double valueCelsius) {
double valueKelvin = 0.0;
valueKelvin = valueCelsius + 273.15;
return valueKelvin;
}
/* Your solution goes here */
int main() {
double valueC = 0.0;
double valueK = 0.0;
valueC = 10.0;
cout << valueC << " C is " << CelsiusToKelvin(valueC) << " K" << endl;
valueK = 283.15;
cout << valueK << " is " << KelvinToCelsius(valueK) << " C" << endl;
return 0;
}
Computer programming is the process of creating code that facilitates and directs specified activities in a computer, application, or software program.
What is the use of programming?The function modification to this question can be given as follows:
Modification Function:
double KelvinToCelsius(double valueKelvin) //defining method KelvinToCelsius
{
double valueCelsius = valueKelvin - 273.15; //defining variable valueCelsius and calculate value
return valueCelsius; //return value
}
The whole program to this question as follows:
Program:
#include <stdio.h> //include header file to use basic functions
double CelsiusToKelvin(double valueCelsius)//defining method CelsiusToKelvin
{
double valueKelvin = 0.0; //defining variable and assign a value
valueKelvin = valueCelsius + 273.15; //calculate value
return valueKelvin; //return value
}
double KelvinToCelsius(double valueKelvin) //defining method KelvinToCelsius
{
double valueCelsius = valueKelvin - 273.15; //defining variable valueCelsius and calculate value
return valueCelsius; //return value
}
int main() //defining main method
{
double valueC = 0.0,valueK = 0.0; //defining variable valueC and valueK assign value
valueC = 10.0; //change variable value
printf("%lf C is %lf K\n", valueC, CelsiusToKelvin(valueC));
valueK = 283.15; //change variable value
printf("%lf is %lf C\n", valueK, KelvinToCelsius(valueK));
return 0;
}
Output:
10.000000 C is 283.150000 K
283.150000 is 10.000000 C
To learn more about Computer programming refer to:
https://brainly.com/question/23275071
#SPJ4
What is the difference between modem and router? Thank you!
A modem is a device that connects your home or office to the internet. It does this by translating data from your computer or other devices into a format that can be transmitted over a phone or cable line, and vice versa.
A router is a device that connects your computer or other devices to a network, such as the internet. It does this by routing data between devices and networks, allowing them to communicate with each other.
In short, a modem connects you to the internet, while a router connects devices to each other and to the internet. Modems and routers often work together, with the modem connecting to the internet and the router connecting devices to the modem and each other. However, they are two different pieces of hardware with different functions.
listen to exam instructionsyou are troubleshooting a malfunctioning notebook computer system. the user has indicated that the lcd screen suddenly became dark and difficult to read while they were downloading a large file through the wireless network while the system was plugged in at their desk. you have checked the system and determined that the backlight has stopped working.which of the following are the most likely causes? (select two.)
The inverter in the LCD assembly has malfunctioned. The cold cathode fluorescent lamp has burned out and needs to be replaced.
Polarizers and the light-modulating properties of liquid crystals are used in a flat-panel display or another electronically modulated optical device that is known as a liquid-crystal display (LCD). Instead of simply emitting light, fluid gemstones employ a background illumination or reflector to produce color or monochrome images. LCDs can display arbitrary or fixed images with low information content that can be displayed or hidden, just like a general-purpose computer display. LCDs typically have the ability to be either on (positive) or off (negative) depending on the arrangement of the polarizers. On the other hand, a character-negative LCD will display black lettering against a background that is the same color as the backlight. On the other hand, a character-positive LCD will have black lettering on a backlight-matched background. Optical filters give white and blue LCDs their distinctive appearance.
A mercury-vapor gas-discharge lamp, also known as a fluorescent tube, uses fluorescence at low pressure to produce visible light. An electric current causes the mercury vapor in the gas to become excited, releasing short-wave ultraviolet light that illuminates the phosphor coating inside the lamp. The efficiency with which a fluorescent lamp produces useful light is significantly higher than that of an incandescent lamp. The luminous efficacy of fluorescent lighting systems typically ranges from 50 to 100 lumens per watt, which is several times higher than the efficacy of comparable-sized incandescent bulbs. An incandescent light bulb, on the other hand, may only produce 16 lumens per watt.
To know more about LCD and Fluorescent tube visit
brainly.com/question/14397769
#SPJ4
If we need to split the network that contains the following IPv4 CIDR address into 2 equally sized subnets, which of the following are valid subnet addresses? (Check all that apply): 128.35.185.125/24 128.35.185.0/25 128.35.184.0/25 128.35.186.0/25 128.35.187.0/25
The valid subnet addresses are (A): 128.35.185.0/25 and (B): 128.35.184.0/25.
Subnet addressing is a methods that allows an autonomous system made up of several networks to share the same Internet address. The Subnet addressing makes it possible to divide a single network address into multiple logical networks known as subnet addreses. Subnets avoids the need to pass data traffic through unneccasray routers to recah destined place so as making networks traffic more efficient.
When a network that contains the IPv4 CIDR address as 128.35.185.125/24 is splitted into two equal-sized subnets, the resulting valid subnet addresses are 128.35.185.0/25 and 128.35.184.0/25.
"
Complete question:
If we need to split the network that contains the following IPv4 CIDR address into 2 equally sized subnets, which of the following are valid subnet addresses? (Check all that apply): 128.35.185.125/24
A: 128.35.185.0/25
B: 128.35.184.0/25
128.35.186.0/25
128.35.187.0/25
"
You can learn more about subnet addressing at
https://brainly.com/question/8907973
#SPJ4
suppose two tasks, a and b, must use the shared variable buf size. task a adds 2 to buf size, and task b subtracts 1 from it. assume that such arithmetic operations are done by the three-step process of fetching the current value, performing the arithmetic, and putting the new value back. in the absence of competition synchronization, what sequences of events are possible and what values result from these operations? assume that the initial value of buf size is 6.
When the operands are different types, the compiler attempts to uniformly type them before executing the operation.
You may also need to add type conversion instructions in your program in certain cases. A type conversion creates the value of an expression in a new type, which may or may not be the type void. For example, a pointer to a structure might be converted into another kind of pointer. However, a structure value itself cannot be converted into another structure type. The compiler provides implicit type conversions when operands have different types or when you call a function with an argument whose type does not match that of the function's corresponding parameter.
double dVar = 2.5;
dVar *= 3;
if ( dVar < 10L )
{ /* ... */ }
To know more about operands click on the link below:
brainly.com/question/20817779
#SPJ4
Identify what algorithm or concept the following code relates to. void Sort(int array[], int tempArray[], int left, int right) { int i, j, k, middle; if(right > left) { middle = (right + left) /2; Sort(array, tempArray, left, middle); Sort(array, tempArray, middle + 1, right); for (i = middle + 1; i > left; --i) tempArray[i-1] = array[i-1]; for(j = middle; j < right; ++j) tempArray[right + middle-j] = array[j+1]; if (tempArray[i]
The given code relates to algorithm called Recursion: permutate() method calls itself in your code. Recursion technique solves computer problems creating functions that call themselves until program achieves desired result.
What does recursion do?In computer science, recursion is a way of solving computational problems where the solution depends on the solutions of smaller instances of the same problem. Recursion solves such recursive problems by using functions that call themselves from their own code.
Why Use Recursion?Recursive algorithm is important in programming. It helps break down bit problems into smaller problems. A recursive solution is often easier to read than an iterative one.
What are the three types of recursion?Type of recursion: 1) Direct recursion: Typical of this is a factorial implementation where the method calls itself. 2) Mutual recursion: This happens when a method, say method A, calls another method B, which in turn calls method A. 3) Multiple recursion: Some recursive calls are made within the method.
To learn more about recursive algorithms visit:
https://brainly.com/question/13104472
#SPJ4
StateChart Based Testing:
The following StateCart represent the behavior of the Wiper of the winshield wiper case study.
Wiper 0 wipes/minute InState(Int) InState(Off) 6 wipes/minute InState(2) InState(1) InState(1),( InState(2)12 wipes/minute InState(3) InState(2) InState(3) 20 wips/minute InState(Low) InState Int) 30 wipes/minute InState(High) InState Low) 60 wipes/minute
a) Design test cases based on the segment of the StateChart shown below. Your test cases
should cover all state transitions shown in the given state diagram. Represent your test
cases in a table.
b) Implement Junit test cases to implement your test cases designed above (a)
c) Use case based testing: Consider the following usage scenario.
i.) Design test cases to test the scenario given.
ii.) Implement Junit test cases to implement your test cases designed above (c)
Assume that when lever and dial changes, they do not need to follow any sequential order. For
example, dial can go from 1 to 3 without staying at level 2.
Models have been shown to be useful in a number of software engineering activities, although model-driven development still faces a lot of opposition.
This essay examines a particular facet of the overall issue. It discusses the results of testing class clusters with state-dependent behavior using statecharts. It details a controlled experiment that looked into their effects on evaluating fault-detection efficiency. Statechart-based testing and code-based structural testing are contrasted, and their software is examined to see if they work better together. The effectiveness of the two test procedures in detecting faults is not significantly different, according to the results, but when combined, they are significantly more effective. This suggests that a cost-effective approach would specify statechart-based test cases in advance, run them once the source code is available, and then finish them with test cases based on code coverage analysis.
Know more about software here:
https://brainly.com/question/1022352
#SPJ4
Which statement is true regarding the pop() method for sets? a.pop() removes the first item added to the set. b.pop() removes the last item added to the set. c.pop() removes a random item in the set. d.pop() returns but does not remove a random item in the set.
Pop() removes a random item in the set. is true regarding the pop() method for sets.
What is sets?
Sets are collections of distinct objects, known as elements, that can be operated on by mathematical operations such as union, intersection and complement. Sets are typically denoted by capital letters (A, B, C, etc.) and the elements are enclosed in curly brackets. Sets are very useful in mathematics as they allow for the definition of operations such as union and intersection which can be used to produce new sets. In addition, sets can be used to represent relationships between objects. For example, a set of integers can be used to represent a linear equation and a set of points can be used to represent a curve. Sets can also be used to represent collections of data, such as a set of student scores or a set of employee salaries.
To learn more about sets
https://brainly.com/question/14366812
#SPJ1
that supports the technologies the An advantage of an _____ intranet is that the organization can specify a(n) organization uses, such as Internet telephony or video conferencing. a. browser b. RSS feed c. top level domain d. search engine
The best choice is A. The ability to designate organizational uses, such as Internet telephony or video conferencing, is a benefit of a browser intranet.
The intranet's web server makes use of TCP/IP, HTTP, and other internet protocols. Through one or more gateway computers, an intranet often has access to the public internet and other services. Websites can also contain audio, video, animation, graphics, and hypertext in addition to basic text. Hypertext links allow users to navigate to other web pages by clicking on them. An intranet is a private network website that is utilized within an organization. TCP/IP, the same technology used by the web, is used by intranet websites.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
all of the following are good questions that can help determine if an underage person is using a borrowed id except:
all of the following are good questions that can help determine if an underage person is using a borrowed id except: Your response is untrue. What is the number to your home?
A minor is a person who is not a legal adult according to the law. This age is usually the so-called "age of majority." The majority age varies by jurisdiction and application but is typically 18 years old. The word "minor" can also be employed in situations that have nothing to do with the general age of majority. For instance, the legal drinking and smoking age in the United States is 21, and even though a person is at least 18, they may still be referred to as a juvenile under the terms of the tobacco and alcohol laws if they are under 21. Underage or minor can also refer to someone who is younger than other legal age restrictions, such as the age of consent, the marriageable age, the driving age, the voting age, etc. These age restrictions frequently differ from the age of majority. In most countries, the definition of a minor is ambiguous. The ages of criminal responsibility and consent, the end of mandatory school attendance, the beginning of legally enforceable contracts, and other milestones may differ from one another.
Learn more about underage person here
https://brainly.com/question/10789364
#SPJ4
7. create 95% confidence intervals for all of the parameters in your final multiple linear regression model and interpret their meaning in the context of the data. [note: the intercept may or may not be meaningful for these data. decide this based on whether it makes sense to describe the biomass of a seedling for which all of the explanatory variables are equal to zero.] copy/paste your r command and your explanations into the green box below. (2 points)
Regression to the mean is sometimes interpreted naively to indicate that variables such as heights, baseball records, and other phenomena must inevitably become more "average."
Regression of earnings on height, with solid line representing fitted regression model and faint lines indicating uncertainty in fitted regression (earnings = 61000 + 1300 height). The x-scale is extended to zero in the plot on the right to show the intercept of the regression line.
We need a sense of the variation in height in the population to which we propose to apply the model in order to better comprehend these coefficients. One method is to take into account the data's 3.8-inch (or 97-millimeter, or 0.000061-mile) standard deviation for heights. The projected earnings difference for a 3.8-inch height difference is $13003.8 = $5197 = $810000000.000061 = $4900, which is a sizeable difference but far less than the residual standard deviation of $19000 left unaccounted for by the regression.
Know more about data here:
https://brainly.com/question/28285882
#SPJ4
A user opens a help desk ticket to replace a laptop keyboard. The user reports that the cursor randomly moves when typing using the laptop keyboard, causing the user to make frequent typing corrections. The problem does not occur when the laptop is attached to a docking station and an external keyboard is used.
You want to find a more affordable solution than replacing the keyboard. Which of the following actions would mitigate the problem?
Increase the screen resolution so that mouse movements are more granular.
Decrease the operating system's mouse speed setting.
Use the special function key to disable the touchpad when the laptop keyboard is used.
Lower the screen resolution so that mouse movements are less granular.
To avoid mistyping because of the random cursor movement use the special function key to disable the touchpad when the laptop keyboard is used.
The built-in mouse pointer input device on a laptop is referred to as a touchpad. Touchpads are good for input from the mouse pointer and are entirely functional. The majority of individuals still prefer using a mouse over a touchpad to move their cursor, though.
However, you are unable to use your laptop's touchpad as an additional input device if a physical mouse is connected to it (there would simply be a clash between the two and the touchpad might also become a source of unintentional input). People frequently need to turn off their touchpads for this and a variety of other reasons.
When using a mouse, you can turn off your computer's touchpad only when necessary.
To learn more about touchpad click here:
brainly.com/question/14665614
#SPJ4