Esme is planning to go on a hot air balloon ride soon. as time passes, the balloon will get higher in the atmosphere, and as the balloon gets higher, the temperature gets cooler. esme has been researching the mathematics behind her balloon ride and found these two functions: esme is wondering if there is a relationship between the time in flight and the temperature. if height depends on time, and temperature depends on height, can a relationship between time and temperature be formed?

Answers

Answer 1

Yes, there is a relationship between time and temperature in a hot air balloon ride, because the temperature changes as the balloon ascend or descend in the atmosphere. If height depends on time and temperature depends on the height, then it is possible to establish a relationship between time and temperature.

One way to do this would be to use the equations that describe the height and temperature as a function of time to calculate the temperature at various times during the balloon ride. For example, if the height of the balloon as a function of time is given by the equation h(t) and the temperature as a function of height is given by the equation T(h), then the temperature at a given time t can be calculated using the equation T(h(t)).

It's important to note that the specific form of the equations for height and temperature will depend on the conditions of the balloon ride, such as the rate at which the balloon ascends or descends, the atmospheric conditions, and other factors. Therefore, it will be necessary to use the appropriate equations and input values in order to accurately calculate the temperature at a given time during the balloon ride.

To know more about temperature visit :

https://brainly.com/question/15267055?referrer=searchResults

#SPJ4


Related Questions

3. gravity can best be described as: a. the tendency of masses to move towards each other b. the energy possessed by its body by virtue of its motion c. the tendency of any state of affairs to persist in the absence of external influences d. the effect of transfer of energy from one object striking another resulting in a near-instant change of relative velocity

Answers

Gravity can best be described as A: "the tendency of masses to move towards each other".

Gravity is the force through which a planet or any other body draws objects toward its center. Gravity keeps all planets in an orbit around the sun. It means that gravity is a force of attraction between objects or bodies that occurs because of their mass. Gravity becomes stronger as mass is increased, and it becomes weaker as the distance between the objects is increased.

Thus, gravity is best defined as the tendency of masses of objects that keeps them moving toward each other.

You can learn more about gravity at

https://brainly.com/question/940770

#SPJ4

Which of the following definitions best describes the concept of work?(a) the flow of energy from one object or substance to another due to a difference in temperature.(b) the flow of energy from one body to another through uniform molecular motion.(c) the force associated with molecular motion.(d) the random motion of molecules in a gas at low pressure.

Answers

Answer:

Your answer is (c) the force associated with molecular motion

Explanation:

Hope this helps :D

the amount of internal energy needed to raise the tempreture of .25kg of water by 0.2C is 209.3 J. how fast must a 0.25 kg baseball travel in order for its kinetic energy to equal this internal energy?
help me!

Answers

Answer:

Explanation:

To find the speed at which a 0.25 kg baseball must travel in order to have kinetic energy equal to 209.3 J, you will need to use the formula for kinetic energy, which is:

KE = 1/2 * m * v^2

Where KE is the kinetic energy, m is the mass of the object, and v is the speed of the object.

To solve for v, you will need to rearrange the equation to solve for v:

v = sqrt(2 * KE / m)

Plugging in the values given in the problem, we get:

v = sqrt(2 * 209.3 J / 0.25 kg)

Solving this equation gives us a speed of approximately 29.3 meters per second. This is the speed at which the 0.25 kg baseball must travel in order to have kinetic energy equal to 209.3 J.

I hope this helps!

9. An astronaut weighs 500 Newtons on Earth and 25
newtons on asteroid X. The acceleration due to
gravity on asteroid X is approximately
A) 1 m/s²
C) 0.2 m/s²
B) 2 m/s²
D) 0.5 m/s²

Answers

The acceleration due to gravity on asteroid X is approximately  0.5 meter/secon^2. Hence, option (D) is correct.

What is acceleration due to gravity?

The acceleration an object experiences as a result of gravitational force is known as acceleration due to gravity. M/s^2 is its SI unit. Its vector nature—which includes both magnitude and direction—makes it a quantity. The letter g stands for gravitational acceleration.

Given that:  An astronaut weighs 500 Newtons on Earth and 25 newtons on asteroid X.

Hence,  The acceleration due to gravity on asteroid X is :

= acceleration due to gravity on Earth × (25 N/500N)

= 10 meter/secon^2 × (1/20)

= 0.5 meter/secon^2 ( approx.)

Learn more about acceleration due to gravity here:

https://brainly.com/question/13860566

#SPJ1

a body is thrown up from a wall of height 2.2m with a speed of 10ms^-1 the distance travelled in the last second of its motion

Answers

Answer:

To solve this problem, we need to use the equations of motion for an object undergoing uniformly accelerated motion. Specifically, we can use the equation for the displacement of an object in the vertical direction:

y = y0 + v0t + 1/2at^2

where y is the displacement of the object, y0 is the initial displacement (in this case, the height of the wall), v0 is the initial velocity (in this case, 10 m/s), t is the time elapsed, and a is the acceleration (in this case, the acceleration due to gravity, which is approximately 9.81 m/s^2).

To find the distance travelled in the last second of motion, we need to find the displacement of the object at t = 1 s, and subtract the displacement at t = 0 s (which is the initial displacement). Substituting these values into the equation above and solving, we get:

y1 = 2.2m + 10m/s * 1s + 1/2 * 9.81m/s^2 * 1s^2 = 12.61 m

y0 = 2.2m

The distance travelled in the last second of motion is therefore y1 - y0 = 12.61 m - 2.2 m = 10.41 m.

Explanation:

a ball is kicked at an angle of 40 degrees with the ground with the initial velocity of 15m/s. the ball reaches point b after 1.5 seconds. 1. what is the initial velocity in the y-direction? 2. what is the final velocity in the x-direction (at point b)? 3. what is the range, xb, in meters? 4. what is the height, hb, when the ball reaches point b, in meters?

Answers

(1) The initial velocity in the y-direction is 9.64 m/s.

(2) The final velocity in the x-direction is 11.5 m/s.

(3)  The range, xb, of the ball is 22.6 m.

(4) The maximum height reached by the ball is 4.74 m.

What is the initial vertical component of the velocity?

The initial vertical component of the velocity is calculated using the following kinematic equation.

Vy = V sinθ

where;

V is the initial velocity θ is the angle of projection of the ball

Vy = V sinθ

Vy = ( 15 m/s ) x ( sin 40 )

Vy = 9.64 m/s

The final velocity in the x-direction is calculated as follows;

Vₓf = Vxi = V cosθ

where;

Vₓf is the final horizontal velocity Vₓi is the initial horizontal velocity

Vₓf  = ( 15 m/s ) x ( cos 40 )

Vₓf  = 11.5 m/s

The range of the ball is calculated as follows;

R = v² sin (2θ) / g

R = ( 15² sin (2 x 40) ) / 9.8

R = 22.6 m

The maximum height reached by the ball is calculated as;

H = v² sin²θ / 2g

H = ( 15² x ( sin 40 )² ) / (2 x 9.8)

H = 4.74 m

Learn more about maximum height of projectile here: https://brainly.com/question/12870645

#SPJ1

Track Block A student must determine the inertial mass of a block attained to a horizontal track. The block is free to move horizontally along the track, as shown above, Frictional forces are considered to be negligible. The student may only choose two measuring tools to determine the inertial mass of the block. What tools should the student choose? Select two answers.
a. Stopwatch
b. Accelerometer
с. Force sensor
d. Meterstick

Answers

The student should choose accelerometer and force sensor for the determination of the inertial mass of the block.

Inertia can be define as the tendency of an object to resist acceleration or we can say tendency of an object to change its state of motion. Inertial Mass is therefore a measure of an object's inertia.

We can also say that inertial mass measures the tendency to resist change in state of motion. The more mass of an object means, the more it resists acceleration. So, it has more inertia.

An accelerometer is an electronic sensor to measure the acceleration forces on an object. It is used to determine the object’s position in space and also to monitor the object’s movement.

A Force Sensor is a transducer to convert an input mechanical load, weight, tension, compression or pressure into an electrical output signal.

To know more about force sensor here

brainly.com/question/28906632

#SPJ4

Which of the following can result in deviations from Beer's law when the path length is constant? Explain your answer.
1. All radiation not absorbed by the sample is transmitted to the detector.
2. Stray light reaching the detecter.
3. Solute conc. exceeding 0.01 M.
4. The use of polychromatic radiation.
5. The sample is heterogenous Just need the ones that are correct.

Answers

There are several conditions that can result in deviations from Beer's Law when the pathlength is constant. This can cause the Beer's Law plot to become non-linear.

When the solute concentrations exceed 0.01 m. This can cause the Beer's Law plot to become flat or even inverted. The use of polychromatic radiation can also cause deviations from Beer's Law. This is because different wavelengths of light will be absorbed to different degrees by the sample.

When the pathlength is constant, the conditions that can result in deviations from Beer's law are:

1) All radiation not absorbed by the sample is transmitted to the detector.

2) The absorbing species undergoes dissociation or association.

3) The sample is homogeneous.

4) Solute concentrations exceeding 0.01 M.

5) The use of polychromatic radiation.

To know more about Wavelengths:

https://brainly.com/question/29451279

#SPJ4

What does FG gm1m2 r2 mean?

Answers

The expression for gravitational force was represented by the equation F, G, m1, m2, and r2.

The product of such gravitational constant as well as the masses of something like the two objects, multiplied with the square root of their distance, would be the expression for the gravitational force separating two objects.

The formula is given as:

force = (product of g, m (mass) ) / square of the d between both the objects.(r)

F = (G(gravitational force) × M × m) / r²

where,

Force = F

Gravitational Constant = G

Mass of one object = M

Mass of another object = m

Distance = r

Gravitational force seems to be the force used by the planet to pull an item toward it. Issacs Newton made the discovery after seeing an apple drop from of a tree.

To know more about Gravitational Force:

brainly.com/question/1633884

#SPJ4

At which scale factor will the pre-image and image be congruent?

Answers

The picture and the pre-image are consistent ONLY when the scale factor is 1.

What is the dilation image pre-scale image's factor?

A sort of transformation known as a dilatation enlarges or shrinks a figure (referred to as the preimage) to produce a new figure (called the image). How much larger or smaller the dilation image will be in comparison to the preimage depends on the scale factor, r.

What is the minimum scale factor required for the image to be congruent?

The scale factor and the center of dilation are used to determine the dilation transformation. The image stretches if the scaling factor is greater than 1.

To know more about pre-image visit:-

https://brainly.com/question/1809747

#SPJ4

A 175 g glider on a horizontal, frictionless air track is attached to a fixed ideal spring with force constant 155 n/m. At the instant you make measurements on the glider, it is moving at 0. 815 m/s and is 3. 00 cm from its equilibrium point. Use energy conservation to find (a) the amplitude of the motion and (b) the maximum speed of the glider. (c) what is the angular frequency of the oscillations?.

Answers

The maximum speed of the glider v = 4.75 m/s. the amplitude of the motion 2.12 cm. the angular frequency of the oscillations is approximately 2.86 rad/s.

To find the amplitude of the motion, we can use the equation for the potential energy of a spring:

Potential Energy = (1/2) * k * x^2

where k is the force constant of the spring, x is the displacement of the glider from its equilibrium point, and Potential Energy is the potential energy of the spring.

In this case, the force constant of the spring is 155 n/m, the displacement of the glider from its equilibrium point is 3.00 cm, and the potential energy of the spring is unknown. Plugging these values into the equation above, we get:

Potential Energy = (1/2) * 155 n/m * (3.00 cm)^2

This simplifies to:

Potential Energy = (1/2) * 155 n/m * 9.00 cm^2

This further simplifies to:

Potential Energy = 693.5 n cm

The potential energy of the spring is equal to the kinetic energy of the glider, so we can use the equation for kinetic energy to solve for the maximum speed of the glider:

Kinetic Energy = (1/2) * m * v^2

where m is the mass of the glider and v is its speed.

In this case, the mass of the glider is 175 g, and its speed is unknown. Plugging these values into the equation above, we get:

(1/2) * 175 g * v^2 = 693.5 n cm

This simplifies to:

v^2 = 693.5 n cm / (1/2) * 175 g

This further simplifies to:

v^2 = 3960.7 g cm / 175 g

This simplifies to:

v^2 = 22.60 g cm

To find the maximum speed of the glider, we can take the square root of both sides of the equation:

v = √(22.60 g cm)

This simplifies to:

v = 4.75 m/s

To find the angular frequency of the oscillations, we can use the equation:

ω = √(k/m)

where ω is the angular frequency, k is the force constant of the spring, and m is the mass of the glider.

In this case, the force constant of the spring is 155 n/m, and the mass of the glider is 175 g. Plugging these values into the equation above, we get:

ω = √(155 n/m / 175 g)

This simplifies to:

ω = 2.86 rad/s

we can use the equation for kinetic energy to find the amplitude of the motion:

Kinetic Energy = (1/2) * m * v^2

where m is the mass of the glider and v is its maximum speed.

In this case, the mass of the glider is 175 g, and its maximum speed is 4.75 m/s. Plugging these values into the equation above, we get:

(1/2) * 175 g * (4.75 m/s)^2 = 693.5 n cm

This simplifies to:

(1/2) * 175 g * 22.60 g cm = 693.5 n cm

To find the amplitude of the motion, we can solve for x:

x^2 = 693.5 n cm / (1/2) * 155 n/m

This simplifies to:

x^2 = 4.5 cm^2

To find the amplitude of the motion, we can take the square root of both sides of the equation:

x = √(4.5 cm^2)

This simplifies to:

x = 2.12 cm

To know more about amplitude

https://brainly.com/question/8662436

#SPJ4

an automobile horn emits a sound frequency of 800 hzas measured by a stationary observer. what frequency would be measured by an observer moving toward the source at 35:0 m

Answers

Answer:

The source emits sound at 800 / sec -        f = 800 / s

The auto moves at 35 / 800 sec (the apparent wavelength is shortened)

f' = f + f vo / v       where vo is the speed of the observer

f' = f (v + vo) / v        rewriting the above equation

f' = 800 / sec (331 + 35) / 331       using 331 m/s as the speed of sound

f' = 885 / sec          sound heard      

how long will a bus take to travel 150 km at an average speed of 40km/h answer

Answers

The actual answer is 3.75

What is the force of friction on a sliding object?

Answers

Sliding friction is the resistance that any two items produce as they slide against one another. Kinetic friction is another name for this friction.

What forces are at work on the moving object?

The external force is the frictional motion. When the external factor is larger than the pressure of kinetic friction, acceleration happens. When the amount of kinetic friction exceeds the force of the external force, slowing (or stopping) takes place.

What kind of sliding friction is that?

When an object slides across a surface, sliding friction is regarded as a resistance to that object's motion. Think of a box that is on the ground. This surface is in close proximity to the floor's surface.

To know more about motion visit :

https://brainly.com/question/22810476

#SPJ4

Kumar rides his bicycle such that the back wheel rotates 10 times in 5 s. Determine the angular velocity of the wheel in a) degrees per second b) radians per second.

Answers

(a) Angular velocity in Degrees per second = [tex]720^0[/tex] per second

(b) Angular velocity in radians per second = 4[tex]\Pi[/tex] radians per second.

Number of rotations = 10

Total time = 5

So, the value of frequency will be =(Number of rotations)/Total time

That will be = (10/5) = 2

Angular velocity is defined as the speed at which an item rotates or revolves around an axis.

The Greek letter omega (occasionally ω, sometimes Ω) stands for angular velocity.

The SI unit for angular velocity is radians per second because it is expressed as an angle per unit of time.

(a) Angular velocity in Degrees per second

[tex]$=360^{\circ} \mathrm{f}=720^{\circ}$[/tex] degree per second.

(b) Angular velocity in radians per second

[tex]$\omega =2 \pi f=2 \pi(2)=4 \pi$[/tex] radians per second.

For more questions on Angular velocity

https://brainly.com/question/6860269

#SPJ4

Three different forces are pulling on a heavy trapdoor (Figure 4.6). Which
force will have the biggest turning effect? Explain your answer.

Answers

F2 because it’s using leverage at the right point

What are the 10 examples of force?

Answers

Answer:

1.Opening and shutting a door

2.Squeezing water out of wet clothes

3.Punching a pillow

4.Stomping your foot

5.Pushing a manual mower

6.Ripping a piece of paper

7.Crushing a ball of dough

8.Pulling out an ingrown hair from your leg

9.Pulling a light chain

10.Smacking a horses butt to signal it to "GIDDIE UP!"

Explanation:

why are the cross-sections of metal beams in the shape of the letter i instead of solid rectangles?

Answers

The cross-sections of metal beams in the shape of the letter I instead of solid rectangles because I beam is used horizontally, the stress is more at the top and in the bottom, and the middle is a stress free region.

Any cross section of the beam experiences bending and shearing stresses as a result of forces and couplings operating on it.

In an I beam, high weights can be carried while weighing less than in a rectangular beam.

The cross sections of metal beams are in the shape of letter I instead of solid rectangles to reduce the weight of the beam while preserving the resistance to bending.

To know more about beams:

https://brainly.com/question/28232038

#SPJ4

What is the relation between the wavelength λ and the frequency f of a signal?

Answers

The frequency and wavelength are indirectly proportional to each other. More is the wavelength, lesser is the frequency and vice-versa.

What is a wavelength?

Wavelength is the distance between identical points( conterminous peaks) in conterminous cycles of a waveform signal propagated in space or along a line. In wireless systems, this length is generally given in measures( m), centimeters( cm), or millimeters( mm). In the case of infrared( IR), visible light, ultraviolet( UV), and gamma shafts( γ)The wavelength is more frequently given in nanometers( nm), which are units of 10- 9 m, or angstroms( Å)., which are units of 10- 10m. Wavelength is equally commensurable with frequency, which refers to the number of surge cycles per second. The advanced is the frequence of the signal, the shorter the wavelength.

To know more about Wavelength, click the link given below:

https://brainly.com/question/12377285

#SPJ4

How would newton law of motion relate to the movement of bumper car how might the ma of the rider and the peed of the car affect thi movement

Answers

According to the Newtons third law of motion, the collision between the bumper car and the rider will affect both of them as both the systems have mass and are moving with certain velocities.

Collision is a case where one moving object or person violently collides with another.

The law of interaction or the Newton's third law of motion, says that if one body exerts a force on a second body, the second body exerts a force equal in magnitude and opposite in direction on the first body.

It's the law of action-reaction, and it helps to explain why you feel a jolt when you collide with another bumper car.

As we know momentum is P = m*v i.e. momentum (P) is directly proportional to the mass and velocity.

Heavier bodies have more mass, therefore have more momentum.

here, the bumper car is the heavy system and hence, it will exerts more impact on the rider.

To know more about collision,

https://brainly.com/question/7593984

#SPJ4

Joe pushes a 12,000 N car, starting from rest, with a force of 310 N for 20 seconds. (a) What is the magnitude of the car's acceleration? (b) How much force would be needed to stop the car in a distance of 30 m?

Answers

The acceleration of the car can be obtained as  0.26 m/s^2. The force required to ove it a distance of 30 m is 11760 N.

What is the acceleration?

We know that the acceleration is the change in the velocity of the object with time. Now we know from the Newton law that the force is the product of the mass of the object and the acceleration.

Now we have that;

weight = mass * acceleration due to gravity

mass = weight/ acceleration due to gravity

mass = 12,000 N / 10 m/s^2

= 1200 Kg

The we know that;

Force = mass * acceleration

acceleration = Force/mass

=  310 N/1200 Kg

= 0.26 m/s^2

For the force that that is needed to move the car a distance of 30 m we have;

F = ma

= 1200 Kg * 9.8 m/s^2

= 11760 N

This is the force that ca move the object forward.

Learn more about distance:https://brainly.com/question/13034462

#SPJ1

A student swings ball of mass M on the end of a string in vertical circle of radius R,as shown in the figure below. Also shown is diagram representing all the forces exerted on the ball at the bottom of the circle where its speed is What is the magnitude of the acceleration of the ball at the bottom of the circle? FTension FGravity
A)Fi /M
B)Fc /M
C)Fr+Fg/M
D) Ft- Fg/M

Answers

The magnitude of the acceleration of the ball  applied at the bottom of the circle is expressed as FTension-FGravity/M.

When making a vertical circle with a ball on a string?The string's tension varies along its vertical as well as  circular course. The ball's speed varies as long as the total amount of kinetic and potential energy is constant through out. Centripetal force fluctuates when speed changes accordingly.

How can I determine the tension of a string moving in a vertical circle?

You can write it down as FC = mv2 /r.

The centripetal force in a moving object attached to a string is equal to the product of the object's mass (mg) and the string tension (T).

To know more about FTension visit :-

brainly.com/question/29091579

#SPJ4

what is the answer of this question

Answers

Answer:

Option C as it stops flies from sitting on the food

Why is CO2 considered a major factor in climate change?

Answers

Carbon dioxide is the planet's most important greenhouse gas because it both absorbs and radiates heat.

Is CO2 the primary factor causing climate change?

The main cause of global warming is CO2, which is created by human activity.Its atmospheric concentration increased by 48% by 2020 compared to pre-industrial levels (before 1750).Human activities can produce smaller amounts of other greenhouse gases.

What really is CO2 and why does it relate to global warming?

A greenhouse gas is carbon dioxide (CO2).As a result, the interior becomes warmer and the effect is similar to that of a greenhouse's glass.This impact is crucial since without the Carbon dioxide that really is present in the atmosphere naturally, Earth may be too chilly for life to exist on it.

To know more about climate change visit:

https://brainly.com/question/28779953

#SPJ4

If you were to get up out of your seat and walk to the office, then return and sit in your seat again what is your displacement?

Answers

Answer:

0

Explanation:

Displacement is the distance between the start and end point of your travel. If you start in your seat, and end up in your seat, your displacement is 0.

How do you calculate the number of ejected electrons?

Answers

The number of ejected electrons in a photoelectric effect experiment can be calculated using the following formula:

What are electrons?

An electron is a subatomic particle that has a negative electric charge. It is one of the fundamental building blocks of matter, along with the proton and neutron. Electrons are found in the outermost region of an atom, called the electron cloud or electron shell.

number of ejected electrons = intensity of light * time of exposure

where intensity of light is the intensity of the light beam (usually measured in watts per square meter), and time of exposure is the length of time that the light beam is shone on the metal surface.

Alternatively, the number of ejected electrons can be calculated using the following formula:

number of ejected electrons = current * time of exposure

where current is the current flowing through the circuit (usually measured in amperes), and time of exposure is the length of time that the light beam is shone on the metal surface.

Therefore, the number of ejected electrons is proportional to the intensity of the light beam and the length of time that it is shone on the metal surface.

To learn more about electrons from the given link:

https://brainly.com/question/26084288

#SPJ4

a small 1.4 n stone slides down a frictionless bowl, starting from rest at the rim. how hard is the bowl pushing on it

Answers

The force that the bowl is exerting on a small 1.4 n stone as it slides down is 13.72 n.

To determine the force that the bowl is exerting on the stone as it slides down, you will need to consider the stone's mass, the acceleration of the stone, and Newton's second law of motion.

Newton's second law of motion states that the force acting on an object is equal to the mass of the object times its acceleration. This can be written as:

F = m * a

where F is the force acting on the object, m is the mass of the object, and a is the acceleration of the object.

In this case, the mass of the stone is given as 1.4 n, and the acceleration of the stone is the acceleration due to gravity, which is 9.8 m/s^2.

Plugging in the values, you get:

F = 1.4 n * 9.8 m/s^2

F = 13.72 n

To know more about motion

https://brainly.com/question/13966796

#SPJ4

box is moving at a constant velocity static friction is 0.35 what does it take to accelate it at 1.2

Answers

If the net force on an object is zero, it will slide down an inclined plane at a constant velocity. This knowledge can be used to calculate the coefficient of kinetic friction between two objects.

The kinetic friction on a slope is denoted as f k = k m g cos. The change in velocity (v) over the change in time (t) is expressed by the equation a = v/t. This enables you to calculate how quickly velocity varies in meters per second squared (m/s2). The coefficient of friction (fr) is a quantity that represents the ratio of the frictional resistive force (Fr) divided by the normal or perpendicular force (N) pushing the objects together.

Learn more about velocity here-

https://brainly.com/question/18084516

#SPJ4

which is the correct answer

Answers

it stop flies from sitting on the food

For a fixed height h2 if you plot v2kin versus d, what kind of curve would you get?
1.a parabola
2.a horizontal line parallel to the x-axis
3.a straight line with a negative slope of sqrt (g/2h2)
4.there is not sufficient information to answer this question
5.a straight line with a positive slope of sqrt (g/2h2)

Answers

The plot of v²kin versus d, where, v is the velocity of motion and d is the distance travelled, is a graph of a quadratic equation, which is a parabola. The correct option is 1 a.

1 a, Parabola

What is a quadratic equation?

A quadratic equation is an equation of the form a·x² + b·x + c = 0, which is an algebraic equation with a second degree of x.

The motion of a body in free fall can be described using the following equation;

v² = u² - 2·g·h

d = u·t - 0.5·g·t²

Therefore; v² = 0² - 2·g·d = 2·g·d

v² = 2·g·d

d = v²/(2·g)

Where; g = The acceleration due to gravity ≈ 9.8 m/s²

Therefore; d ≈ v²/(2 × 9.8)

The above equation is a quadratic equation, and the graph of the equation, which is a graph of a quadratic equation is parabolic.

Please find attached the graph of v²/(2×9.81) to d, creates with MS Excel

From the shape of the graph and the function of the graph, the graph is a parabola

The correct option is 1. a parabola

Learn more about quadratic equation here:

https://brainly.com/question/776122

#SPJ1

Other Questions
Does a toothache mean root canal? Why do my legs hurt when I do ab workouts? exhibit cartwright computing cartwright computing expects to order 126,000 memory chips for inventory during the coming year, and it will use this inventory at a constant rate. fixed ordering costs are $200 per order; the purchase price per chip is $25; and the firm's inventory carrying costs is equal to 20 percent of the purchase price. (assume a 360-day year.) refer to exhibit cartwright computing. what is the economic ordering quantity for chips? group of answer choices 3,175 13,675 12,088 6,243 8,124 Electrons in atoms are best described as O electromagnetons. O waves. O photons.O protons. O tiny planets. It costs $$3535 per hour to rent a boat at the lake. You also need to pay a $$2525 fee for safety equipment. You have $$200200. How long can you rent the boat?. According to the international Fisher effect, if investors in all countries require the same real rate of return, the differential in nominal interest rates between any two countries: how would i match these together How many phenotypes are possible with 8 alleles? The diagrams above use arrows to represent the speed of a gas particle. Which of the diagrams best represents the speed of the particles of a gas at a fixed temperature, and why?answer choicesDiagram 1, because all the particles have the same speed.Diagram 1, because the particles are moving in different directions.Diagram 2, because the particles have a net kinetic energy of zero.Diagram 2, because the particles have a variety of different speeds Select all the true statements. a. if vertical angles are congruent, then two lines cut by a transversal are parallel. b. if two parallel lines are cut by a transversal, then corresponding angles are congruent. c. if two parallel lines are cut by a transversal, then alternate interior angles are congruent. d. points on a perpendicular bisector of a line segment are equidistant from the segments endpoints. e. points on a perpendicular bisector of a line segment are never equidistant from the segments endpoints. Under the provisions of the Uniform Securities Act, for willful violations, the State Administrator can:A. institute criminal proceedingsB. impose a monetary fineC. file suit under civil liability provisionsD. revoke registration of persons Each of the following tables defines a relationship between an input x and an output y. Which of the relationships represent functions? table a x -8 -3 0 6 y 24 4 9 72 table b x 9 15 24 38 y -14 -16 53 29 table c x 15 24 24 100 y -16 53 29 7 table d x -8 6 0 6 y 24 4 9 72 a. Table a and table c b. Table a and table b c. Table b and table c d. Table c and table d. Who issues security classification guides for systems plans programs projects or missions? What are the 4 types of jurisdiction? What is a graph of a system of linear inequalities? What is surprising about Mrs. Franks reaction to Mr. Van Daans wrongdoing? Ayuda pls con la tabla descripcin y la ecuacin pls What are the three main monetary policy goals of central banks? What is the British Museum's main argument for keeping the Elgin Marbles in the United Kingdom? What are the three elements of all public policies quizlet?